Powerwave Technologies LNKA100 LINKNET RF BROADBAND AMPLIFIER MODULE User Manual LinkNet VHF Broad V1 1003

Powerwave Technologies Inc. LINKNET RF BROADBAND AMPLIFIER MODULE LinkNet VHF Broad V1 1003

Contents

BROCHURE

Kaval’s advanced LinkNet VHF Service Module is a digitally controlled Class-A amplifier designed to operate withinthe LinkNet Convergence Platform to extend coverage of the vhf (136-174 MHz) spectrum range.Software configured, this broadband amplifier’s main function is to receive, amplify and transmit its designatedfrequency range and to ensure that clean, clear signals arrive at their intended destination.Because of LinkNet’s modular design, additional service modules can be added to keep pace with technologicaladvancements or changes in user demand, making LinkNet the most flexible, scalable, and cost-effective solutionon the market today.Servicing VHF. Broadband Version.Features & BenefitsInstallation & Service Features All LinkNet Service Modules are‘plug-and-play/unplug-and-remove’ to minimize installationdown time and eliminate the need for extensive service equipment on site.Hot Swappable Features LinkNet Service Modules can be addedor replaced within the LinkNet Convergence Platform withoutpowering down the system. This provides quick and easy maintenance with no disruption to service.Diagnostic Features Each LinkNet Service Module automaticallyperforms a self-diagnostic check when inserted into the chassis.As well, all major fault conditions are constantly monitored,including:Primary power failureThermal managementOver-current/under-currentTM Trademark of Kaval Wireless Technologies.SM Service Mark of Kaval Wireless Technologies.1.888.86.kaval www.kaval.com Wireless inside. Made possible.SMLinkNetTM Service ModuleLNKA100
abLinkNet™ Convergence PlatformDonor AntennaTap-In™ and Ceiling AntennaCoaxial CableProduct DeploymentSignals are received via an off air donor antenna located onthe exterior of the building, from a nearby macro cell site.* The LinkNet Convergence platform converges and amplifiessignals which are then distributed to each floor via coaxialcable. Kaval’s patented Tap-In signal taps and a series of ceiling mounted antennas provide balanced coveragethroughout the building.* Signals may be taken directly from base station via fiber or T1connection if so desired.SpecificationsModule SpecificationsFrequency Range LNKA100-A 136-155 MHz, LNKA100-B 150-174 MHzModulation and Bandwidth Broadband AmplifierRF Gain Adjustment Range +34 dB to +84 dB, in 1 dB incrementsAGC Control Adjustment Range +15 dBm to +30 dBm3rd Order Intercept Point IP3+47 dBm Typical Noise Figure<8 dB, 5dB TypicalTransmit Duty Cycle ContinuousTransmit Spurious -13 dBm MaximumReceive Conducted Spurious -57 dBm MaximumPower Module Supply Requirements 40 Watts MaximumGroup Delay<5 µsRF Connectors SMA (50 Ω) Connectors on back of ChassisConnections DB-15 Connector on back of Chassis provides Per-Module Fault Relay,Interconnect to other Modules, and RS-232 connection.Front Panel Indicators Operating, Stand By, Fault, Program Mode, Receive, TransmitConfiguration Options Modules may be configured via optional Gateway Module, or via PC and a RS-232 ConnectionV1-10/031.888.86.kaval www.kaval.com Wireless inside. Made possible.SMMechanical CharacteristicsDimensions (W x H x D) 2" x 9.11" x 14"Weight 10 lbs. approx.Operating Temperature Range* -100C to +500COperating Humidity Range 10 to 90% RH, Non-Condensing* Consult Kaval for installation specific forced-air cooling requirements.Specifications are subject to change without notice.LinkNetTM Service ModuleLNKA100

Navigation menu