Powerwave Technologies BDA1200 Bi-Directional Amplifier, Model BDA1200 User Manual antinst

Powerwave Technologies Inc. Bi-Directional Amplifier, Model BDA1200 antinst

Corrected page 17 of users maunal

l Page 17 Kaval Telecom Inc.DCM000000001• ANTENNA INSTALLATIONl All Antenna Installation is to be performed by Qualified Technical Personnel only.l Antenna Installation Instructions and locations below, are for the purpose of satisfying FCC RFExposure Compliance requirements.lThe Roof Top Antenna for linking to the Donor Site is a directional (high gain) Antenna fixed-mountedphysically on the side or top of a building, or on a tower. The Antenna Gain must be no more than 10 dB.The Roof Top Antenna location should be such that only Qualified Technical Personnel can access it, andthat under normal operating conditions no other person can touch the Antenna, or approach within 10meters of the Antenna.lThe In-Building Antenna connection is via a coaxial cable distribution system with Signal Taps at variouspoints connected to the fixed-mounted Indoor Antennae. This is shown in the figure in the Introduction.The Indoor Antennae are simple 1/4 Wavelength (0 dB Gain) types. They are used with Kaval 12, 16, or20 dB Cable Taps. As such the maximum EIRP will be at the first Tapped Antenna, which will be 12 dBbelow the maximum signal level of the BDA1200 (+40 dBm with Booster & PA); +28 dBm, or 0.63 WattsEIRP. These Antennae are to be installed such that no person can touch the Antenna, or approach within0.2 Meters.ANTENNA INSTALLATION WARNINGALL ANTENNA INSTALLATION IS TO BE PERFORMED BY QUALIFIED TECHNICAL PERSONNELONLY.ANTENNA INSTALLATION INSTRUCTIONS AND LOCATIONS ARE FOR THE PURPOSE OFSATISFYING FCC RF EXPOSURE COMPLIANCE REQUIREMENTS, AND ARE NOT OPTIONALALL ROOF TOP ANTENNA INSTALLATION MUST BE SUCH THAT NO PERSON CAN TOUCH THEANTENNA, OR APPROACH CLOSER THAN 10 METERS.ALL IN-BUILDING ANTENNAE INSTALLATIONS MUST BE SUCH THAT NO PERSON CAN TOUCHTHE ANTENNAE, OR APPROACH CLOSER THAN 0.2 METERS.

Navigation menu