Powerwave Technologies 5JS0066 Power Amplifier User Manual 323152

Powerwave Technologies Inc Power Amplifier 323152

Contents

Appendix A

G3L-1900-54/G3L-1900-54-A Installation & Service Manual  Copyright Powerwave Technologies, Inc., April 2003. All rights reserved All specifications are subject to change without notice. Contact the factory for complete performance data. 044-05135 Rev. A A-1 April 2003 Appendix A. Specifications Table A-1 G3L-1900-54/54-A Wideband Multicarrier Cellular Amplifier Functional Specifications Frequency Range 1930 - 1990 MHz (60 MHz Bandwidth) Instantaneous Bandwidth 20 MHz * Total Typical / Maximum Input Power -15.7 - +4.8 / +5.8 dBm Total Output Power 54 W (47.3 dBm) Adjacent Channel Leakage Power Ratio (ACLR) Spectrum Analyzer set-tings: 30 KHz RBW, 300 KHz VBW, True RMS detector ACLR1 <-46dBc@f=fc ±5 MHz ACLR2 <-51dBc@f=fc ±10 MHz RF Gain 40 dB +0.5 dB Gain Flatness ±0.5 dB Output Protection Mismatch Protected Input Port Return Loss 18 dB min Harmonics Better than -50 dBc Out of Band Spurious Better than -60 dBc Duty Cycle Continuous DC Input Power: G3L-1900-54 -48 Vdc nominal, 6.5 amps typical (15 amps max) Operational -57 Vdc to -60 Vdc (Po derated outside normal operating range) AC Input Power: G3L-1900-54-A 230 Vac nominal, 50/60 Hz, 1.9 amps typical (3 amps max) Operational 264 Vac to 300 Vac (Po derated outside normal operating range) Operating Temperature -10 ºC to +50 ºC Storage Temperature -40 ºC to +85 ºC Operating Humidity 0 % to 80 % Relative Humidity (noncondensing) Storage Humidity 0 % to 100 % Relative Humidity (noncondensing) AC, DC Input, Summary Alarm, Base Station Communication TLCI Bus Elcon Modular Flatpaq tm RF Input Connector SMA Female RF Output Connector Type N-Female Power Consumption DC Version: 310 Watts @ Po = 30 W average power AC Version: 325 Watts @ Po = 30 W average power Weight 28 lbs. Dimensions 3.125” High, 16.75” Wide, 14.125” Deep, 15.75” Deep including connector guides * The command received from the base station includes the operating band and based on that band, the pilot frequency sets to 10 MHz lower than the lowest carrier in the operating band.

Navigation menu