Polygroup LUMALIGHT-C Remote Controller User Manual Tinsel tree IM

Polygroup Trading Limited Remote Controller Tinsel tree IM

Contents

User manual

ASSEMBLY INSTRUCTIONS MADE IN CHINA*Electrical Rating For The Tree (For Indoor Use Only)0.8A 120V 60HzFig. B - Tree and Light Assembly1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.2. Assemble the tree stand and place on a level surface. (See Fig. A)Congratulations on purchasing your new tree from Polygroup. This tree featureQuick Set® technology to make set up and storage quick and easy.Carefully follow the instructions below on how to quickly and easily set up your new tree.TREE ASSEMBLY INSTRUCTIONS3. Each tree section is numbered with a tag. Please identify all sections before assembling.4. Assemble the tree from bottom to tree top. Start with the bottom section and remove the protectivecap before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into thestand.Section 3Section 2Section 1InsertGreen LabelPlug Into WallOutletDo Not TamperInternal PartsOpen theprotectivecoverDo Not TamperInternal PartsOpen theprotectivecoverFig. A - Tree Stand AssemblyUnfold the legs and lay the stand in a flat area. Then slide the locking disc downward and snap into place. Please scan code tolearn how to shape and set up your tree1 2Section 1Section 3Section 2Remove tree stand and tree sections from box.Detach Remote Controller from power cord. Insert Section 1 into the tree stand. Deploy and shape the Section 1 .SET UP3Control Box
ASSEMBLY INSTRUCTIONS MADE IN CHINATop view Side viewFig. CSTORAGE INSTRUCTIONS5. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that allwires are free of branch hinges.6. Insert green label plug into the wall outlet.(See Fig. B ), Push Power Button on Remote Controller yourentire tree should now be lit. Select Color Selection Buttons or Modes Options can change light showeffects.7. A button on Control Box can manually operate the light modes and colors selection.8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest fromthe pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. C)9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniformlook. Shift branches to fill any gaps. Your Christmas tree is now complete and ready to be decorated.1. Unplug extension cord from the wall outlet first and then remove all ornaments and decorations.2. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree toexcessive heat or humidity may damage your tree.4 5 6Remove the protective cap of Section 1 and add Section 2. Deploy the Section 2 like Step 3. Remove the protective cap of Section 2 and add Section 3.1 3Detach Section 3 and store it into box. Fold the lower layer of Section 2 like Step 2.4 5 6Detach Section 2 and put it into the box.Cover the protective cap of Section 1then fold same as Section 2.Detach Section 1 from tree stand and pack them into the box.Fix the Remote Controller back onto power cord2Cover the protective cap of theSection 2.
ASSEMBLY INSTRUCTIONS MADE IN CHINAScrewBatteryCR2025FrontCoverBackCover1. Loose the screws and detach the back cover2. Push the battery and take it out alone with the arrow direction3. Install another new CR2025 battery4. Install the back cover and screws to front cover. Make sure the screws are all tightly fastened.5. Test the function and see if it works.NOTE: Air-dry remote controller if it gets wet.BATTERY REPLACEMENT OF REMOTE CONTROLLEROPERATION INSTRUCTION OF REMOTE CONTROLLER 1. Press button to turn the lights ON.2. Press color selection button for your preferred color.3. Cycling Press button to get different light modes:• flash• strobe• fade• smooth4. Press button to turn off the light after use.Color SelectionButtonsPower (ON/OFF)ModesOptions
ASSEMBLY INSTRUCTIONS MADE IN CHINATROUBLE SHOOTING TIPSSPARE PARTSFor Pre-lit Trees, If The Tree Does Not Illuminate1. Please check to make sure that all plugs are properly connected and power cord is plugged into the walloutlet. (If the tree comes with a foot pedal, try stepping on the on/off button).2. Turning the poles gently to make sure pole to pole are connected into place.3. Check for loose connection between light string plugs and extension cords.4. Please check for loose, broken or missing light bulbs and replace as needed.5. Manually operate the button on Control box to eliminate Remote Controller issues.1. Extra hinge pins are included for repairing the hinges. Place the branch into the slot of the bracket.2. Insert a new hinge pin through the hole and secure using the retainer washer.(See Fig. D)Each tree includes hinge pins/washers, and for pre-littrees spare bulbs and fuses are also included. If extraparts are needed, please contact our customer servicecenter.Loose Hinge PinFig.DCUSTOMER SERVICE FOR CHRISTMAS TREESFor any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at 1-888-919-0070 or visit our website at www.polygroup.com. One of our customer service representatives will be happy to assist you.TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.Customer Name: Address:(No P.O. Boxes) City & State: Zip Code: Day Phone: Date Purchased: Tree ID#: Tree UPC#: Store Purchased: Specify Problem: FCC VERIFICATION USER MANUALThis device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.

Navigation menu