Pittasoft DR750LW-2CH Car Dashcam User Manual 9 DR750LW 2CH

Pittasoft Co., Ltd. Car Dashcam 9 DR750LW 2CH

UserManual.wiki >

DR750LW 2CH User Manual

User Manual

BLACKVUE LCD

BLACKVUE LCD I 3Table of ContentsIntroduction to the Manual 4Getting Started Cautions for Safety 5 Checks for the External GPS 8 Checks for the microSD Card 8 Management During Summer Season 9 Product Features 9 Package Components 10 Name of Each Part 11 Attach & Detach the Mounting Holder of the Front View Camera 13 Attach & Detach the Mounting Holder of the Rear View Camera 13Install the BlackVue Checking Installation Position 14 Insert & Remove the microSD Card 15 Installation 16Video Recording Normal Recording 18 Parking Recording 18 Event Recording 19 Emergency Recording 19Simple Video Playback Playback in BlackVue 20 Playback Using a microSD Card 21 Playback Using the BlackVue App 23Using the BlackVue Switch to Live View 25 Settings 25Using the BlackVue Screen Description 31Viewer Video Playback 33 Settings 39Firmware Upgrade 44Product Specifications Product Specications 45& Standards LED Indicators 47 Recording Time 48

BLACKVUE LCD I 5Getting StartedCautions for SafetyThe purpose of these cautions is to maintain user safety and to avoid damage to property. Please make sure to read through this document so as to use the product properly.DangerDeath or property damage can be caused for users if the following directions are not followed: yDo not use a damaged or altered power cord. Use the cords provided by the manufacturer.Otherwise, it can cause an explosion, re, or malfunction. yDo not operate this product with wet hands.It can cause an electric shock. yDo not install it in a place with high humidity, or combustible gases or liquids.It can cause an explosion and re. yDo not disassemble, repair, or alter the product yourself.It can cause re, an electric shock, or malfunction. For internal inspection and repair, call your customer service center. yIf any foreign matter gets inside the product, detach the power cord right away.Call the customer service center for repair. yDo not operate the product while driving.It can cause an accident. Stop or park your car in a safe place to operate it. yDo not install the product where it can interfere with the driver's vision.It can cause an accident.

6WarningDeath or serious injury can be caused for users if the following directions are not followed: yUse the correct input voltage.Otherwise, it can cause an explosion, re, or malfunction. yConnect the power cord rmly so that it cannot easily be disconnected.Otherwise, it can cause re. yDo not cover the product with cloth or blanket.It can cause the external deformation of the product or re. Use the product and peripherals in a place where ventilation is ensured. yDo not leave the product where infants, children, or pets can reach it.They might swallow small components, or their saliva could get into it and cause an explosion due to a short circuit. yWhile cleaning the inside of the car, do not spray water or wax directly onto the product.It can cause re, an electric shock, or malfunction. yIf smoke or an unsual smell is emitted from the power cord, detach it immediately.Call the customer service center or the reseller. yKeep the terminal of the power cord clean.A dirty terminal can cause excessive heat and re.

BLACKVUE LCD I 7CautionInjury or property damage can be caused for users if the following directions are not followed: ySince microSD cards are consumables, replace them with new ones after prolonged use.If a microSD card is used for a long period of time, a video may not be properly recorded. Thus, check regularly if recording is being properly done. If not, replace the card with a new one. yClean the lens on a regular basis.If the lens is not clean, it may aect recording. yWhile data are being saved into the microSD card or the card is reading data, do not detach the card. The data may be damaged or malfunction caused. yIt is recommended to install this product at the installation spot. The installation spot can be checked from the website of BlackVue (www.blackvue.com). yWhen this product does not need to be used for a long period of time, it is recommended to detach the power cord. yDo not press the LCD screen with a sharp or pointed object. yDo not press the LCD screen too rmly. yRisk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. yDo not spray a detergent directly onto the exterior of this product.It can discolor or have a crack. Also, the product can have an error. yIf the product is used outside the optimal temperature range (0C ~ 60C), performance can degrade or malfunction can be caused. yCheck if this product has been properly installed.The product can have malfunction by being dropped due to vibration, or you can be injured. yWhile entering or exiting a tunnel, at a daytime in the face of bright sunlight, or at dark night with no light, the quality of a recorded video can deteriorate. yIf the product is damaged or the power supply is cut due to an accident, a video may not be recorded. yExcessively tinted windshield glass can distort the recorded video or cause it to be indistinct. yProlonged use of the product can increase the interior temperature and cause burns.

8Checks for the External GPSEven if the GPS isn’t working the video is recorded, but position coordinates and driving speed are not recorded. When used for the rst time, or when the product is not used for three consecutive days, it will take some time for GPS to find the current position.If the recorded video is checked using a viewer program, or the BlackVue application, and an error occurs with the GPS time, it is recommended to turn on and o the power after a GPS signal is received.Comply with the following for an uninterrupted GPS signal: yDo not have the windshield glass tinted with a metallic component. yBe careful with the installation of devices that may interfere with GPS reception (e.g. some wireless starters & alarms and MP3/CD players). yDo not use the product simultaneously with other devices that use GPS signals. yCloudy weather can interfere with GPS reception. yGPS reception can be poor when driving under overpasses or in tunnels, underpasses, streets with skyscrapers or high rise buildings, generating stations, military bases, or broadcasting transmitters, etcChecks for the microSD CardRefer to the following for trouble-free use of microSD card: yIt is recommended to format it on a weekly basis. yIf the recorded video breaks up, format the microSD card. yIn order to ensure the reliable use of the card, format the card by using the official program recommended by the SD Card Association. For detailed information, see the website of BlackVue (www.blackvue.com). yBefore formatting it, copy important les to other storage media. yThe microSD card can be formatted in BlackVue without connection to a PC. (Page 30) yInsert the formatted microSD card into the product. Then, the microSD card will be automatically initialized and the rmware installed on it. yInsert or remove the microSD card only when the product is turned o. yMicroSD cards are consumables, and warranted for six months. yIf a microSD of another company is used, a compatibility issue may occur. Therefore, you must use the original microSD card from Pittasoft Co., Ltd. yIf Power Magic Pro, a continuous power supply unit, is used, the microSD may not be able to be used for a long period of time. yIf a 64GB microSD card needs to be used, format it using BlackVue Viewer and insert it into the product. (Page 31)

BLACKVUE LCD I 9Management During Summer Season yPark in a shady place or an indoor parking lot. yIf an outdoor parking lot is used, park away from direct sunlight. Also, open the window by 1 or 2 cm. yIf the product is exposed to direct sunlight, cool the product down for a specic amount of time before use. yDuring summer, the temperature inside the vehicle may rise to 80°C-90°C due to sunlight. Keep the inside of the vehicle at an appropriate temperature.Product FeaturesFull High Denition and Smooth ImageThis product allows you to record front view, at full high denition and rear view high denition videos, to ensure smooth images.Real-Time Image Check Due to Touch LCDThis product enables the PIP feature, which allows you to easily operate, using the 4.0” touch LCD; and view front and rear view screens simultaneously.Automatic Power-O at High TemperatureDue to the built temperature detection sensor, once the black box reaches a high temperature, automatic power supply will be suspended to protect the product.Prevention of Electric Drainage in Batteries for the VehicleOnce the power is below the current value set in the product, automatically power supply will be stopped to prevent the batteries for the vehicle from drainage.

10SONY EXMOR CMOS SensorDue to the SONY image sensor that ensures excellent image quality, clearer identication is ensured during the day and nightCoaxial Cable For Excellent Data TransferFor reliable data transfer, high quality coaxial cables are used to prevent missing data and data loss.High Denition Wide-Angle LensUsing a high denition wide-angle lens, accidents can be accurately recorded.Premium DesignBlackVue is designed with stylish and sophisticated premium micro-patterns.Diverse Recording ModesFour diverse recording modes according to user convenience (e.g. Emergency/Normal/Event/Parking)Package ComponentsFront View Camera ManualPower Cable Cable Clips (8 EA)microSD Card Reader Rear View Camera

BLACKVUE LCD I 11Double-Sided Tape for the Mounting HoldermicroSD Card (BlackVue Viewer and User Guide Included)Rear View Camera Connection Cable Note yPictures of the components may dier from the actual. yTo enhance the performance of the product, the components may be changed without prior notice. yThe additional package components and parts sold separately can be purchased from the website of BlackVue (www.blackvue.com). Name of Each PartFront View CameraMounting HolderCamera Angle Control BoltCamera LensDC in (Power Terminal)V in (Terminal for Connecting to the Rear View Camera)

12GPS (External GPS Terminal)LCD ScreenmicroSD Card SlotMounting Holder Detachment ButtonWi-Fi LEDGPS LEDREC LEDPower Buttont1SFTTJOH4IPSU4UBSUTBOETUPQTWPJDFSFDPSEJOHt1SFTTJOH-POH5VSOTPOPSPòUIFQPXFS Note yThe external GPS is sold separately.Rear View CameraMounting Holder Camera Lens V out (Terminal for Connecting to the Front View Camera) Rear Security LED

BLACKVUE LCD I 13Attach & Detach the Mounting Holder of the Front View Camera1Press the mounting holder detachment button and pull the front view camera.2Push the front view camera into the mounting holder to assemble the mounting holder to front view camera.Attach & Detach the Mounting Holder of the Rear View Camera1Hold the mounting holder, and pull the rear view camera.2In order to assemble the mounting holder of the rear view camera, push the rear view camera into the mounting holder until a clicking sound occurs.

14Install the BlackVueChecking Installation Position1It is recommended to install the front view camera next to the room mirror. Clean any foreign substances and moisture from the place where the prod-uct will be installed with a dry cloth.2It is recommended to install the rear view camera at the higher part of the back window. Note yDo not install the product where it can interfere with the driver's vision. yIt is recommended to install the product at the spot specied.

BLACKVUE LCD I 15Insert & Remove the microSD Card1Insert the microSD card into the microSD card slot, of the front view camera, in the direction as shown in the gure below:2In order to detach the microSD card, gently push the center of the microSD card with your thumb and pull out the card. Make sure that the microSD card does not spring out when detaching the card. Caution yDo not remove the microSD card while it is saving or reading data. This may cause data damaged or malfunction. yCopy important data to other storage medias. Pittasoft Co., Ltd. is not accountable for data loss resulting from carelessness. Note yInsert or remove the microSD card only when the product is turned o. yMicroSD cards are consumables. Replace them with new ones after prolonged use.

16Installation1In a bright and safe place, stop the vehicle engine and pull out the vehicle key.2Attach the front view camera on the vehicle windshield glass with double-sided tape.3Attach the lens of the rear view camera on the vehicle’s back window with double-sided tape, so that the lens can also be placed at the center of the vehicle.4Connect the V in terminal of the front view camera to the V out terminal of the rear view camera by using the cable for connecting to the rear view camera.5Use the power cable to connect the DC in of the front camera to car’s power socket. Note yIt is necessary to use Power Magic (the Battery Discharge Prevention Device) to record video while the car is parked. yTo use BlackVue with other equipment that uses a power cable, purchase and use a dual power outlet adaptor.

BLACKVUE LCD I 176Organize the cables, using the cable clip, to prevent the driver's vision from being interrupted.7Start-up of the vehicle, then check if the product is properly operating.8Adjust the camera angle to view the LCD screen. Slightly unfasten the cam-era angle control bolt to adjust the angle; then fasten the bolt. Even if the prop is detached, the camera angle can be maintained. Thus, the camera can be installed at the same lens angle as before. Caution yDo not remove the microSD card while it is saving or reading data. This may cause data damaged or malfunction. yIf BlackVue is used for the rst time, set time in Settings rst. (Page 29) Note yAfter a test drive, check if the video has been properly recorded. yThe recorded video is saved in MP4 format.PLEASE CONNECT REAR CAMERA FIRST BEFORE CONNECT THE POWER CORD ON FRONT CAMERA.

18Video Recording Normal Recording 1Once you start the vehicle engine, the BlackVue will automatically power on.2When the BlackVue is powered on, the normal recording will automatically start. The video can be checked from the LCD screen.Parking Recording 1When in normal recording mode, if the vehicle does not move for five minutes or longer, the mode will automatically switch to parking recording mode.2In parking recording mode, if camera motion or vehicle impact is detected, event recording will start. Note yIf a le is recorded in parking recording mode, a message will appear on the LCD screen when the mode switches to normal recording mode.

BLACKVUE LCD I 19Event Recording1During normal recording mode or parking recording mode, if an impact to the vehicle is detected, event recording will start. 10 seconds before impact to the vehicle will also be recorded. Note yThe degree of sensitivity, which impact detection sensitivity, can be set in Settings. (Page 29)Emergency Recording1Press the on the LCD screen to record the desired image. The recorded le will be saved in the form of an event recording le. Note yUp to ten emergency recorded les can be saved. If more than ten les are recorded, the older les will be deleted in chronological order. yThe emergency recording file can be recorded depending on the file unit setting. (Page 27) yThe emergency recording cannot be interrupted during recording.

20Simple Video Playback Playback in BlackVueYou can directly check recorded videos from the LCD screen.1Press on the LCD screen. A list of recorded videos will appear.2From the list, select the recorded video you want to play back. Note yWhen playing back a video, a video recording cannot be made using BlackVue.

BLACKVUE LCD I 21Playback Using a microSD CardPlayback Using a SmartphoneWith a Smartphone that supports microSD cards, a video can be viewed.1Turn o the power of this product, and detach the microSD card. Note yFor details on how to detach the microSD card, refer to Insert & Remove the microSD Card. (Page 15)2Insert the microSD card into the Smartphone.3Run the application for video playback, and select the video you want to play back. Note yA method for playing back recorded videos may dier depending on the type of Smartphone; therefore refer to your User's Guide for details. yIf there are numerous recorded videos in the microSD card, it may take a long time to load the le.Playback Using a GPS NavigationRecorded videos can be played back using GPS navigation.1Insert the included microSD card into the microSD card reader. 2Connect the microSD card reader to navigation.3Run the video playback program, and select the recorded video you want to play back from the removable drive.

22 Note yA method for playing back recorded videos may differ depending on navigations. For details, refer to the User's Guide on Navigations. yIf there are many recorded videos in the microSD card, it may take long to load a le. ySome navigations do not enable full HD video playback.Playback Using a PCRecorded videos can be checked immediately, using the video playback PC program.1Insert the included microSD card into the microSD card reader. 2Connect the microSD card reader to navigation.3Run the video playback program, and select the recorded video you want to play back from the removable drive.

BLACKVUE LCD I 23Playback Using the BlackVue AppWi-Fi is required to play back a video via BlackVue application. For a model that does not enable Wi-Fi, insert the microSD card into a Smartphone to play back a recording. 1Install the BlackVue application in a Smartphone, and run the application. The BlackVue application can be downloaded from Google Play Store, Apple App Store, or Windows Store. Note yThe BlackVue application is enabled in Android 2.3 or higher, iOS 5.0 or higher, or Windows 8.0. ySome features may not be enabled depending on the type of Smartphone. yThe BlackVue application is optimized for iOS 7.2Press Wi-Fi ON on the LCD screen to enable Wi-Fi.3Touch the Wi-Fi button of the BlackVue application. Select the device you want to connect, and enter the password. (E.g. DR750LW-A682DE) Touch the OK button to connect to the selected device. The initial password is blackvue, but the user can change it.

24 Note yIf information on Wi-Fi connection is saved, touch the Wi-Fi button of the BlackVue application, without enabling the Wi-Fi feature of the Smartphone, to automatically connect to Wi-Fi. yFor the Live View function, Wi-Fi can be used within a 10m range, although the range may vary depending on the circumstances during use yWhen playing back recorded videos using Wi-Fi, the reception may vary according to the data transfer rate. yFor details on Wi-Fi settings, refer to Wi-Fi and Other Settings. (Page 42) yWi-Fi will automatically disabled 10 minutes after not being in use. This cannot be changed. 4Select the recorded video you want to play back from the list of recorded videos. Note yPress the Live View button to check a video in real-time. yIf Live View or the VOD playback & copy functions are used by connecting to Wi-Fi while recording at full HD (1920x1080) @30 fps, the recording frame will be reduced to 20 fps. yFor detailed information on the BlackVue application, refer to the Manual on the BlackVue Application. The manual can be downloaded from the website of BlackVue (www.blackvue.com).

BLACKVUE LCD I 25Using the BlackVueSwitch to Live ViewThe front/rear screen recordings in this product can be checked in real-time.1Press on the LCD screen. If the screen is turned o, press the LCD screen to turn on the screen. Then, press . 2Whenever is selected, Live View will appear. Front + Rear PIP p Front Screen p Rear ScreenSettingsA setting can be changed in BlackVue. Press on the LCD screen. Note yWhen selecting settings, no videos can be recorded in BlackVue. yAfter changing a setting, you must save the changes. yIf a setting is changed in BlackVue, the setting cannot be changed using the BlackVue application.Screen Settings

26Item DescriptionScreen Bright The brightness of the LCD screen can be adjusted.Screen On Time The waiting duration of the LCD screen can be set.Switch to the Rear The direction of a rear view camera video can be changed. The actual file is recorded in the forward direction. Touch revision If touch revision is required on the LCD screen, this option is available.Video SettingsItem DescriptionResolution The resolution of a recorded video can be set.Front Bright The brightness of a recorded video can be set.

BLACKVUE LCD I 27Audio SettingsItem DescriptionVoice Recording Voice recording can be enabled or disabled.Alarm Volume The BlackVue voice alarm volume can be adjusted. Note yPress the Power button briey to enable or disable voice recording. Recording SettingsItem DescriptionNormal Recording Enables or disables normal recording mode.Date/Time Display Turns on or o the date and time display recorded in a video. Speed Unit Display Changes the speed unit recorded in a video. File Unit Changes the unit of saving a recorded video. P Mode Auto Switch Enables or disables automatic shift to parking mode.

28 Note yIf Normal Recording and P Mode Auto Switch are set to OFF, only event recording videos will be saved.System SettingsItem DescriptionReset Settings Initializes settings.Wi-Fi Info. Wi-Fi connection information (e.g. SSID and password) can be checked. Language The language can be checked. System Info. The model name and rmware version can be checked.Timezone The time zone can be checked. The time zone setting is used as information on a recorded video.

BLACKVUE LCD I 29Time SettingsThe current time and time zone can be set. If an external GPS is connected, the time will be automatically set according to the time zones. Note yThe time zone can be changed in the BlackVue Viewer. (Page 39) yThe time can be synchronized with the smartphone by pressing Settings > Firmware > Auto Sync on the BlackVue App.Sensitivity SettingsItem DescriptionNormal Mode In Normal recording mode, the impact sensitivity can be set when switching to event recording mode. Parking Mode In parking recording mode, the impact sensitivity can be set when switching to event recording mode.

30Power SettingsItem DescriptionMin. Working VoltThe minimum operating voltage can be set. In park-ing recording mode, once the vehicle battery voltage reaches under the setting value, the power supply will stop automatically to prevent battery from drainage.Battery Save ModeBattery save mode time can be set. In order to prevent the vehicle battery from drainage, power supply auto-matically stops after a set period of time. Note yIt is necessary to use Power Magic (the Battery Discharge Prevention Device) to congure the power settings. SD Card FormattingThe microSD card can be formatted or a format cycle message can be set. If a format cycle message is set, a message will appear in the cycle when this product is turned on.

BLACKVUE LCD I 31Using the BlackVue ViewerScreen DescriptionDouble-click the BlackVue Viewer icon in the microSD card to run BlackVue Viewer. In order to install BlackVue Viewer on the PC, connect to the BlackVue website (www.blackvue.com) and download it. 18432567No. Name Description1Recorded Video Playback WindowVideos can be played back using this window. The screen can zoom in/out by using a mouse.2Language SettingIf you change the language on playback screen, the language for BlackVue Viewer can be changed. For details about language configuration for BlackVue, refer to the Basic Settings. (Page 39)3microSD Card FormattingThe microSD card connected to the PC can be formatted. 4G-Sensor InformationG-sensor information of video recording can be conrmed. 5GPS Information GPS information when the video was recorded can be checked.

32No. Name Description6Recorded Video ListUsing the file list and map tab, the recorded video list, including recording location can be conrmed.Click Front to display only rear view camera les in the recorded video list. Click Rear to display only front view camera les in the recorded video list.: This is an normal recording file and marked with green in the timeline.: This is an event and emergency recording le and marked with orange in the timeline.: This is a parking mode recording file and marked with blue in the timeline.7TimelineVideos can be searched by date, hour, minute, or second of video recording. For detailed information about Timeline, refer to Timeline. (Page 34))8Playback Option ButtonWhile playing back recorded video, the screen, playback speed, and volume can be adjusted. For detailed information regarding playback option button, refer to Playback Control. (Page 33)) Note yIn order to save GPS information while recording a video, connect an external GPS to BlackVue.

BLACKVUE LCD I 33Video PlaybackPlayback ControlA recorded video can be played back in full screen mode or reversed upside down. The playback speed can be adjusted to fast forward the video.View Upside-DownView Front/Rear Full Screen View Front/Rear Screen Mode Playback/Pause Stop Volume ControlPlay Previous File Play Next FilePlayback TimeMove Frame (Previous) Playback Speed ControlMove Frame (Next) Note yWhile playing back recorded video, double-click the screen to switch to full screen view mode. Double-click the screen again or press ESC to return to default view. yWhile playing back recorded video, use the mouse wheel to zoom in/out. yWhile playing back recorded video, right-click the screen to view the 100 % zoom-in screen.

34Magnifying GlassYou can zoom playback selected portions of recorded video.Left-click on the screen while playing back recorded video and a partial zoom-in window will appear. Move the window to identify the license plate. Note yPress Front or Rear, on the recorded video list, to display only front view camera or rear view camera to enable the magnifying glass feature. yThe magnifying glass feature is available only in BlackVue Viewer for Windows.TimelineVideo can be explored with the date, hr, min, and sec of when a video was recorded.Year Selection Timeline for Hour SelectionTimeline for Minute Selection Timeline for Second SelectionMonth Selection Note yIn the date selection area, a date of video recording is marked by a red circle and the currently-selected date is marked by a yellow circle.

BLACKVUE LCD I 35File ManagementWith the recorded video list, a le can be deleted or saved with a dierent name.1Select a le from the recorded video list and right-click it.2To delete a le, click Delete.3To save it with dierent name, click Export and select the option you want. Note yWhen you select Sound Off, the voice is removed from the recorded video to be saved.4Click the OK button and select the le name you want, together with the path.5Click the Save button to nish.

36Verify FilesWith the recorded video list, a le can be veried forgery.1Select a le from the recorded video list and right-click it.2Click Verication and click OK button.Map CheckThe location of video recording can be conrmed on the map.1Select a le from the recorded video list and play it back.2Click the Map tab.3With the +/- button or mouse wheel, the map can be zoomed in/out.Speed Unit ChangeMap Type SelectionCar LocationMap Zoom-In/Out

BLACKVUE LCD I 37 Note yInternet connection is required to use the map service. yOnly from recorded les with GPS information, data can be checked.MyWay Viewer CheckThe driving route of the video recording can be checked.1From the recorded video list, select and play back the desired le.2Press the button. Then, the driving route will be displayed on the map.3Double-click the map to play back the video recording from the driving route, nearest to the spot clicked.Speed Unit ChangeCar LocationRecord Starting PointDriving Route Currently-Played FileLatitude & Longitude Car LocationMap Type Selection

38 Note yInternet connection is required to use the map service. yOnly from recorded les with GPS information, data can be checked.Saving as an ImageWhen playing back a recorded video, the desired part can be saved as an image.1From the recorded video list, select and play back the desired le.2Press the button on the part to be saved as an image. Note yUse Timeline or press the / button to explore the window in detail.3Click the G button. 4Select the desired le name and path. Then, click the Save button. Note yJPG and BMP are supported as image le formats.Image PrintingWhen playing back a recorded video, the desired part can be saved as an image.1From the recorded video list, select and play back the desired le.2Press the button on the part to be saved as an image. Note yUse Timeline or press the / button to explore the window in detail.3Click the button.4Select the printer, and click the OK button.

BLACKVUE LCD I 39SettingsBasic SettingsTime, video, and recording settings can be changed.1Click the G button and click the Basic tab.2After changing the conguration click Save & Close.123No. Function Description1Time Settings The time zone can be set for location used. The time zone setting is used as information on a recorded video.2Image SettingsThe quality and brightness of front/rear recorded videos can be set. For detailed information on video recording time, refer to Recording Time. (Page 48))3Recording SettingsNormal Record, Voice Record, Date and Time Display and Auto Switching to Parking Mode function can be turned on/o. Speed Unit Display and Record File Unit can be changed.4Language SettingThe language of BlackVue voice directions can be changed. Note yWith the normal recording function disabled, only event and parking mode recording videos are saved. yWith the speed display unit disabled, the vehicle speed is not displayed when the recorded videos are played back. yOn microSD cards, older les are deleted rst to create space for newly-recorded videos in microSD cards. Copy and store important les, such as event recording, les to other storage media. yPress the Power button briey to enable or disable voice recording.

40Time SettingIf an external GPS is not connected, set time manually before use.If time is not set, the time of a recorded video may not be correctly saved.1Format the microSD card, and then upgrade the rmware.2Connect to the website of BlackVue (www.blackvue.com), and download the time setting program.3Run the time setting program before setting time. Note yWhen setting time, set time when BlackVue power is on. The product boots approximately 15 seconds after power supply. yIf an external GPS is connected, time will be automatically set.Sensitivity SettingIt is possible to set the G-sensor sensitivity to start event recording during normal recording and the G-sensor & motion detection sensitivity to start event recording during recording in parking mode, respectively.1Click the G button and click the Sensitivity tab.2Change a setting, and click Save & Close. Note yFor details about advanced sensitivity settings, refer to Advanced Sensitivity Settings. (Page 41)

BLACKVUE LCD I 4112No. Function Description1Sensitivity for Normal RecordingIt is possible to set the G-sensor sensitivity to start event recording during normal recording.2Sensitivity for Parking ModeIt is possible to set the G-sensor and motion detection sensitivity to start event recording during parking recording mode.Advanced Sensitivity SettingsSensitivity can be easily set while watching a recorded video.1Click the G button. Then, click the Sensitivity tab.2Click the Advanced Setting button for the desired setting.3Play back a recorded video. Save G-sensor information is displayed at the bottom of the recorded video played back.

424Move the control bar upwards or downwards to adjust the sensitivity range. If the range is wide, it will be less sensitive. If the range is narrow, it will be more sensitive.It is recorded as an event. It is not recorded as an event. Note yIf an event recording occurs due to the sensitivity setting while a recorded video is being played back, the edge of the playback screen will blink in orange.5Change a setting, and click Save & Close.Wi-Fi and Other SettingsSettings for Wi-Fi, LED indication, and voice announcements can be changed.12

BLACKVUE LCD I 43No. Function Description1Wi-Fi SettingSSID and the password, which determines whether to automatically run Wi-Fi and enable WI-Fi connection can be changed. You can connect to Wi-Fi with the SSID and password settings in the BlackVue application. If the password is forgotten, you can reset the password.2Other SettingsFor video recording status, normal recording mode, and parking recording mode, the LED indicators can be turned on/o.The voice announcement or volume can be changed.LCD and Protection Settings The LCD screen, protection for vehicle batteries, and microSD card formatting cycle can be set.12No. Function Description1LCD SettingsAn LCD setting can be changed. Screen brightness, screen waiting duration, and rear view camera image upside-down can be set.2Safety Settings Settings for protecting vehicle batteries, the microSD card format notication cycle can be changed.

44How to Apply CongurationYour settings can be applied to the product.1Insert the microSD card into the product. For details on how to insert the microSD card, refer to Insert & Remove the microSD Card. (Page 15))2Once power is turned on, your settings will be automatically applied. Note yInsert the microSD card only when the product is turned o.Firmware UpgradeConnect the microSD card to the PC to upgrade firmware version. The firmware version can be upgraded with BlackVue application. For details, refer to the BlackVue Application manual. 1Connect the microSD card to the PC. For details on how to connect, refer to Playback Using a PC. (Page 22))2Format the microSD card, and connect to BlackVue website (www.blackvue.com). Then, download the rmware upgrade le, in the form of a zip le.3Unzip the le, and copy the BlackVue folder to the microSD card. 4Insert the microSD card in BlackVue, and turn on the power. Then, upgrade will automatically occur.

BLACKVUE LCD I 45 Note yOnce firmware upgrade is completed, all of the settings will be initialized. yFor details on how to insert the microSD card, refer to Insert & Remove the microSD Card. (Page 15) yInsert the microSD card only when the product is turned o. Caution yMake sure that the power is never turned o while rmware upgrade is in progress.‘Hancom Inc.’ owns the copyright of the ‘HANDotum / HANDotumB / HANDotumExt’ font used in DR750LW-2CH rmware.Product Specications & StandardsProduct SpecicationsModel Name DR750LW-2CH Color/Size/Weight Front: Black / Width 107.2mm x Height 67.5mm x Thickness 20.5mm / 136gRear: Black / Width 67.4mm x Height 27.6mm / 30gMemory microSD card (16GB / 32GB / 64GB)Recording Mode Emergency Recording, Normal Recording, Event Recording (Impact Detection), and Parking mode Recording (Motion+Impact Detection)Ⲽ For Parking mode recording, a battery discharge prevention device is required.Camera Front: CMOS Sensor 2 million pixelRear: CMOS Sensor 2 million pixelViewing Angle Front: Diagonal: 146°; Horizontal: 115°; Vertical: 85°Rear: Diagonal: 129°; Horizontal: 108°; Vertical: 57°

46Resolution/FrameFront RearFull HD (1920x1080) @30FpsFull HD (1920x1080) @30Fps Full HD (1920x1080) @30FpsHD (1280x720) @30FpsHD (1280x720) @30Fps HD (1280x720) @30FpsⲼ The resolution/frame can be changed. LCD 4-Inch WVGA (800x480) Touch ScreenⲼ Front/rear PIP enabledVideo Compression Type MP4Wi-Fi Internal(802.11b/g/n(2.4~2.4835GHz)GPS ExternalMicrophone Built-In Speaker Built-InⲼ Voice Announcement LED IndicatorsFront: Front Security LED, Wi-Fi LED, GPS LED, Recording Status (REC)LEDRear: Rear Security LEDSensor 3-Axe Acceleration SensorButtonPower Button Ⲽ Pressing Short: Starts and stops voice recording.Ⲽ Pressing Long: Turns on or o the power.Backup Battery Built-In Super CapacitorInput Power DC 12V-24VPower ConsumptionMax. 10W (Avg. 6.6W) Ⲽ Depending on the usage condition, it is subject to change.Continuous PowerCut-O Voltage 11.8V/12V/22.8V/23.2V can be selected. Voltage Cut-O Timer12 hours/24 hours/36 hours/48 hours/72 hours can be selected.Operating Temperature -20C ~ 60C Storage Temperature -20C ~ 70C High Temp. Cut-O Approx. 70C

BLACKVUE LCD I 47Certicates Front: KC, CE, FCC, RoHS, Telec, WEEERear: KC, CE, FCC, RoHS, WEEE Software BlackVue ViewerⲼ Windows XP or higher (Windows 8 supported) and Mac Leopard OS X(10.5) or higherApplication BlackVue Application (Android 2.3 or higher, iOS 5.0 or higher, and Windows 8.0 or higher)LED IndicatorsLEDStateRecording State (REC) Wi-Fi GPS Front SecurityRear Security Boot-Up Cross BlinkingLighting WhiteRecordingEmergencyBlinking Red and FastBlinking White and FastNormalBlinking Red Blinking WhiteEventBlinking Red and FastBlinking White and FastParkingBlinking RedBlinking WhiteWi-Fi ON/OFF Lighting BlueWi-Fi ON/OFF Change Blinking BlueGPS ON/OFF Lighting GreenGPS ON/OFF Change Blinking GreenSoftware Control Enabled Disabled Disabled Enabled Disabled

48Recording TimeResolution (Front+Rear)Item Full HD + Full HD@30fpsFull HD + HD@30fpsHD + HD@30fpsMemory Capacity16 GB 3 HR 20 MIN 3 HR 50 MIN 4 HR 30 MIN32GB 6 HR 40 MIN 7 HR 40 MIN 9 HR64GB 13 HR 20 MIN 15 HR 20 MIN 18 HRBit Rate Front 6 Mbps 6 Mbps 4 MbpsRear 4 Mbps 3 Mbps 3 Mbps Note yDepending on your environment, the actual recording duration may vary. yDepending on the image quality, the microSD card lifespan can be shorten.

Before Requesting A/S ServiceIt is required for users to back up important data regularly from storage device (to other separate media). Depending on the situation, it will be necessary to delete the data from the internal storage device (component). It might be needed to delete all the data from the product for A/S. So it is required for users to back up important data by themselves before requesting A/S. For all the A/S products, it is regarded that the user already backed up the data so there is no additional back-up process. Therefore, it is important to note that we are not responsible for any data lost during A/S.

FCC Compliance InformationTHIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.CAUTION : Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: yReorient or relocate the receiving antenna. yIncrease the separation between the equipment and receiver. yConnect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. yConsult the dealer or an experienced radio/TV technician for help. Modications not expressly approved by the manufacturer could void the user’s authority to operated the equipment under FCC rules.YCK-DR750LW-2CH

Product WarrantyQThis product is warranted for 1 year from the purchase date. (Accessories Such as Batteries and microSD Cards: Six Months)QPittasoft Co., Ltd. warrants its products under the Standard on Consumer Dispute Settlement (Announced by the Korea Fair Trade Commission). It is as follows: If a service is requested, Pittasoft or its designated subcontractor will provide the service.Product Name (Model Name) Serial No.Purchase Date ResellerCustomer Information Address / Phone NumberConsumer Damage Type WarrantyWithin the Warranty Term After the Warranty TermPerformance/Functional Issues or Problems Under Normal Use ConditionsSerious Repair Required Within 10 Days After Purchase Product Exchange/Refund at Purchase PriceN/ASerious Repair Required Within One Month After PurchaseProduct ExchangeSerious Repair Required Within One Month After ExchangeProduct Exchange/Refund at Purchase PriceExchange Disabled Refund at Purchase Price

Consumer Damage Type WarrantyWithin the Warranty Term After the Warranty TermPerformance/Functional Issues or Problems Under Normal Use ConditionsRepairEnabledDefects Free RepairPaid Repair/Paid Exchange/Free Repair After the Term of Free WarrantyFailure Resulting From the Same Defect (Third Time) After RepairProduct Exchange/Refund at Purchase PriceFailure (Fifth Time) After the Repair of Failures in Dierent PartsRepair DisabledLoss of a Product Whose Repair was Requested Refund of the Amount Calculated by Adding 10% to the Fixed Depreciation Amount (Maximum: Purchase Price)When repair cannot be conducted due to a lack of spare parts within the component retention periodWhen repair cannot be completed with spare parts Product Exchange/Refund After Fixed Depreciation1) Malfunction Resulting From Customer Faults- Malfunction and damage to the product due to your mishandling (e.g. dropping, impact, damage, and forced operation) or misuse- Malfunction and damage to the product conducted after you or a third party, not the after-sales service engineer of Pittasoft repairs alters the product- Malfunction and damage to the product caused by parts, consumables, or products sold separately, not specied by Pittasoft2) Other Cases- Malfunction due to natural disaster (e.g. re, submersion, and earthquake)- When consumable parts expire lifespan- Malfunction due to an external causePaid Repair Paid RepairQThis warranty is eective only in the country where you purchased this product.QProduct exchange or refund is possible only at the seller where you purchased the product.- RF exposure warning: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body.

MEMO

MEMO

MEMO

Name ] Car DashcamManufacturer ] Pittasoft Co.,Ltd. / KoreaAddress ] (Gasan-dong, BYC HIGHCITY), A-7th floor, 131, Gasan digital 1-ro, Geumcheon-gu, Seoul, 153-718, Republic of KoreaSales Headquater ] Tel: +82-2-6947-4670(#3) ] Fax: +82-2-6947-4699 ]e-mail: sales@pittasoft.com

Navigation menu

Upload a User Manual

Namespaces

Wiki Guide
HTML
PDF
Info

Views

User Manual
Discussion / Help

Navigation

© 2025 UserManual.wiki | Privacy Policy

Contact Us
DMCA