Pioneer K103 DVD RDS AV RECEIVER/ MULTIMEDIA NAVIGATION RECEIVER User Manual 04 Short Term Confidential 2
Pioneer Corporation DVD RDS AV RECEIVER/ MULTIMEDIA NAVIGATION RECEIVER 04 Short Term Confidential 2
Pioneer >
Contents
- 1. 04 Short-Term Confidential_User Manual_1
- 2. 04 Short-Term Confidential_User Manual_2
04 Short-Term Confidential_User Manual_2
![Parts and controlsMain unitLCD screenVOL (+/-)Press to switch between the Application screen and the AV operation screen.Press and hold to switch to the camera view mode.To activate the camera view mode with this button, set [Back Camera Input] to [On] or [AV Input] to [Camera] (page 49).Press to display the top menu screen.Press and hold to power off. To power back on, press any button.Press to display the menu bar (page 11).Press and hold to mute or unmute.Press to display the top menu screen or back to previous screen.Press and hold to turn off the display.Press to activate the voice recognition mode with a connected iPhone or smartphone.Press and hold to display the connectable device list screen or device search screen.RESET Press to reset the microprocessor (page 9).SD card slot Refer to Inserting and ejecting an SD memory card (page 26).Auto EQ microphone input jackUse to connect a microphone for acoustical measurement (sold separately).Disc-loading slotRefer to Inserting and ejecting a disc (page 23).Remote Control7EnEnglishNOTEVOLUME (+/-)REAR SRC Press to cycle through all the available rear sources.Press and hold to turn the rear source off.SRC Press to cycle through all the available sources.Press and hold to turn the source off.TOP MENU Press to return to the top menu during DVD playback.Source mode select switchUse to switch the source mode between the front source and the rear source.Thumb pad Use to select a menu on the DVD menu.MUTEMENU Displays the DVD menu during DVD playback.AUDIOSUBTITLEANGLEPress to change the audio language, subtitle language or viewing angle during DVD playback.BAND/ESC Press to select the tuner band when tuner is selected as a source.Press to switch between media file types when playing the following types of data:•Disc•External storage device (USB, SD)](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-7.png)
![Preparing the remote control10 EnRemove the insulation sheet before use.How to replace the batteryInsert the CR2025 (3 V) battery with the plus (+) and minus (-) poles orientated properly. WARNING•Do not ingest the battery, Chemical Burn Hazard. (The remote control supplied with) This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.•Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like. CAUTION•Remove the battery if the remote control is not used for a month or longer.•There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.•Do not handle the battery with metallic tools.•Do not store the battery with metallic objects.•If the battery leaks, wipe the remote control completely clean and install a new battery.•When disposing of used batteries, please comply with governmental regulations or environmental public institutions’ rules that apply in your country/area.•“Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California, U.S.A.)”Point the remote control in the direction of the front panel to operate.Using the remote controlNOTEThe remote control may not function properly in direct sunlight. Important•Do not store the remote control in high temperatures or direct sunlight.•Do not let the remote control fall onto the floor, where it may become jammed under the brake or gas pedal.Starting up the unit1Start the engine to boot up the system.The [Select Program Language] screen appears.NOTES•From the second time on, the screen shown will differ depending on the previous conditions.•From the second time on, enter the password for the anti-theft function if the password entry screen appears.2Touch the language.3Touch .The [Speaker Mode Settings] screen appears.4Touch the speaker modes.[Standard Mode]4-speaker system with front and rear speakers, or a 6-speaker system with front and rear speakers and subwoofers.[Network Mode]3-way system with a high range speaker, middle range speaker and subwoofer (low range speaker) for reproduction of high, middle and low frequencies (bands). WARNINGDo not use the unit in standard mode when a speaker system for 3-way network mode is connected to the unit. This may cause damage to the speakers.5Touch .Initial Legal Disclaimer screen appears.6Touch [OK].The top menu screen appears.NOTEOnce the speaker mode is set, the setting cannot be changed unless this product is restored to the default settings. Restore the default settings to change the speaker mode setting (page 62).](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-10.png)
![12 EnThe hidden function keys appear.NOTEThis key does not appear for some AV sources.Displays the characters that are entered.Moves the cursor to the right or left for a number of characters equivalent to the number of touches.Enters the characters in the text box.Deletes the input text to the left of the cursor one letter at a time.Touching and holding the key deletes the letters to the left of the cursor in rapid succession.Confirms the entry and proceeds to the next step.Enters a space.Switches between alphabet and numbers/symbols.Switches between capital and lower case letters.Top menu screenOperating the on-screen keyboardFavorite source iconsTIPS•When you connect the external navigation system to this unit, the navigation mode key is displayed at the middle of the right side of the display.•If you select [Power OFF], you can turn off almost all functions. The [Power OFF] mode is released in the following cases.– An incoming call is received (only for hands-free phoning via Bluetooth).– A rear view camera image is input when the vehicle is in reverse.– A button on this unit is pressed.– The ignition switch is turned off (ACC OFF), then turned on (ACC ON).AV/Device source operation key.Displays the current source.TIPWhen the last source is displayed behind the key, you can switch the source by touching the key.Setting the time and date (page 60)Settings (page 49) and Favorite menu (page 60)](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-12.png)
![13EnEnglishConnected device keyDisplays connected device.Switches the source or application with connected devices such as AppRadio Mode +, external navigation system, Apple CarPlay, Android Auto.TIPS•When a device with a compatible application is connected, the favorite application key appears. Once the key appears, you can adjust the range of the favorite application key area with the following steps.1Touch and hold . appears at the top right of the favorite application key.2Drag to the desired position.To finish the adjusting, touch any place of the display except for the favorite application key.•You can also switch the mobile device to be connected with the following steps.1Touch .2Touch .3Select desired device then follow the instruction.Touch for the first wireless connection with the device.NOTEThis function is available only when you stop your vehicle in a safe place and apply the parking brake or the vehicle is completely stopped.AV source (page 19)Hands-free phoning (page 14)BluetoothBluetooth connection1Turn on the Bluetooth function on the device.2Press .3Touch then .The Bluetooth screen appears.4Touch [Connection].5Touch .The unit starts to search for available devices, then displays them in the device list.6Touch the Bluetooth device name.After the device is successfully registered, a Bluetooth connection is established by the system. Once the connection is established, the device name is displayed on the list.NOTES•If twenty devices are already paired, [Memory Full] is displayed. Delete a paired device first (page 14).•If your device supports SSP (Secure Simple Pairing), a six-digit number appears on the display of this product. Touch [Yes] to pair the device.•If a PIN code input is required, enter a PIN code. (The default PIN code is "0000".) TIPThe Bluetooth connection can also be made by detecting this product from the Bluetooth device. Before registration, make sure that [Visibility] in the [Bluetooth] menu is set to [On] (page 14). For details on Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth device.Bluetooth settings1Press .2Touch then . CAUTIONNever turn this product off and disconnect the device while the Bluetooth setting operation is being processed.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-13.png)
![Menu Item Description[Connection] Connect, disconnect, or delete registered Bluetooth device manually.Touch to delete registered device.To connect a registered Bluetooth device manually, touch the name of the device.To disconnect the device, touch the name of the connected device in the list.Connect the Bluetooth device manually in the following cases:•Two or more Bluetooth devices are registered, and you want to manually select the device to be used.•You want to reconnect a disconnected Bluetooth device.•Connection cannot be established automatically for some reason.[Auto Connect][On] [Off]Select [On] to connect the last connected Bluetooth device automatically.[Visibility][On] [Off]Select [On] to make this product visible to the other device.[PIN Code Input] Change the PIN code for Bluetooth connection.The default PIN code is “0000”.1Touch [0] to [9] to input the pin code (up to 8 digits).2Touch .[Device Information] Displaying the device name and address of this product.[Bluetooth Memory Clear] Touch [Clear] then [OK] to clear the Bluetooth memory.Hands-free phoning14 EnTo use this function you need to connect your cellular phone to this product via Bluetooth in advance (page 13). CAUTIONFor your safety, avoid talking on the phone as much as possible while driving.1Press .2Touch .The phone menu screen appears.3Touch one of the call icons on the phone menu screen.The following items are displayed.•Name of the current cellular phone•List number of the current cellular phone•Reception status of the current cellular phone•Battery status of the current cellular phoneUsing preset dial list (page 15)Using phone bookSelect a contact from the phone book. Touch the desired name on the list then select the phone number. •The contacts on your phone will be automatically transferred to this product.•Update the phone book manually.•[Visibility] of the [Bluetooth] screen should be on (page 14). •If two cellular phones are automatically connected to this product with the Bluetooth device auto connect function, the phone book of the second phone is displayed.Using call historyMake a phone call from the received call , dialed call , or missed call .Direct phone number inputEnter the number keys to enter the phone number then touch to make a call.Switches to the voice recognition function (page 15).NOTEMaking a phone call▶To end the call 1Touch .TIPSNOTES](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-14.png)
![15EnEnglish▶Registering a phone numberYou can easily store up to six phone numbers per device as presets.1Press .2Touch .3Touch or .On the [Phone Book] screen, touch the desired name to display the contact’s phone number.4Touch .▶Dialing from the preset dial list1Touch .2Touch the desired entry on the list to make a call.The dial screen appears and dialing starts.▶Deleting a phone number1Press .2Touch .3Touch .4Touch .5Touch [Yes].1Touch to answer the call.Touch to end the call.TIPS•Touch while getting a call waiting, switch to the talking person.•Touch while getting a call waiting to reject the call.NOTEWhen two phones are connected at the same time, if an incoming call is received on the second phone while you are talking on the first phone, the dial confirmation screen for the second phone will be displayed.Using the preset dial listsReceiving a phone callYou can use the voice recognition function of iPhone or smartphone.NOTES•When an iPhone running iOS 6.1 or higher is used, Siri Eyes Free Mode is available with this product.•For using this function with a smartphone, the device must be compatible with Android Auto. For using the voice recognition function with a smartphone, launch Android Auto beforehand.1Press .2Touch .3Touch .The voice recognition function launches and the voice control screen appears.TIPYou can also launch the voice recognition function by pressing .1Touch .TIPTo display the dial confirmation screen, touch again.NOTES•The dial confirmation screen cannot be minimized on the AV operation screen.•AV sources cannot be selected even if the dial confirmation screen is minimized while talking on the phone or receiving an incoming call.1Press .2Touch then .Menu Item Description[Auto Answer][On] [Off]Select [On] to answer an incoming call automatically.[Ring Tone][On] [Off]Select [On] if the ring tone does not come out from the car speakers.[Invert Name] Select [Yes] to change the order of the first and last names in the phone book.Voice recognition functionMinimizing the dial confirmation screenPhone settings](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-15.png)
![16 EnDuring a conversation, you can switch to private mode (talk directly on your cellular phone).1Touch or to turn private mode on or off.NOTES•If two cellular phones are connected to this product and the first phone is set to private mode, you can receive incoming calls on the second phone while maintaining the call in progress on the first phone.•When two cellular phones are connected to this product and private mode of the first phone is turned off, if an incoming call on the second phone is answered while a call is in progress on the first phone or while dialing or receiving a call on the first phone, the call, dialing, or receiving on the first phone is ended.This product can be adjusted to the other party’s listening volume.1Touch to switch between the three volume levels.▶General notes•Connection to all cellular phones featuring Bluetooth wireless technology is not guaranteed.•The line-of-sight distance between this product and your cellular phone must be 10 meters or less when sending and receiving voice and data via Bluetooth technology.•With some cellular phones, the ring sound may not be output from the speakers.•If private mode is selected on the cellular phone, hands-free phoning may be disabled.▶Registration and connection•Cellular phone operations vary depending on the type of cellular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions.•When phone book transfer does not work, disconnect your phone and then perform pairing again from your phone to this product.▶Making and receiving calls•You may hear a noise in the following situations:– When you answer the phone using the button on the phone.– When the person on the other end of the line hangs up the phone.•If the person on the other end of the line cannot hear the conversation due to an echo, decrease the volume level for hands-free phoning.•With some cellular phones, even after you press the accept button on the cellular phone when a call comes in, hands-free phoning may not be performed.Setting the private modeAdjusting the other party’s listening volumeNotes for hands-free phoning•The registered name will appear if the phone number is already registered in the phone book. When the same phone number is registered under different names, only the phone number will be displayed.▶The received call and dialed number histories•You cannot make a call to the entry of an unknown user (no phone number) in the received call history.•If calls are made by operating your cellular phone, no history data will be recorded in this product.▶Phone book transfers•If there are more than 1 000 phone book entries on your cellular phone, not all entries may download completely.•Depending on the phone, this product may not display the phone book correctly.•If the phone book in the phone contains image data, the phone book may not be transferred correctly.•Depending on the cellular phone, phone book transfer may not be available.Bluetooth audioBefore using the Bluetooth audio player, register and connect the device to this product (page 13).NOTES•Depending on the Bluetooth audio player connected to this product, the available operations with this product may be limited to the following two levels:– A2DP (Advanced Audio Distribution Profile): Only playing back songs on your audio player is possible.– A2DP and AVRCP (Audio/Video Remote Control Profile): Playing back, pausing, selecting songs, etc., are possible.•Depending on the Bluetooth device connected to this product, the available operations with this product may be limited or differ from the descriptions in this manual.•While you are listening to songs on your Bluetooth device, refrain from operating the phone function as much as possible. If you try operating, the signal may cause noise for song playback.•When you are talking on the Bluetooth device connected to this product via Bluetooth, it may pause playback.1Press .2Touch then .The system setting screen appears.3Touch [AV Source Settings].4Confirm that [Bluetooth Audio] is turned on.5Press .](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-16.png)
![17EnEnglish6Touch .The AV source screen appears.7Touch [Bluetooth Audio].The Bluetooth audio playback screen appears.Switches between playback and pause. Skips files forward or backward.•By pressing then touch or , you can also skip files forward or backward.•By pressing then touch and hold or , you can also perform fast reverse or fast forward.Selects a file or folder from the list to playback.This function is available only when the AVRCP version of the Bluetooth device is 1.4 or higher.Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth.Sets a repeat play range.Plays files in random order.Bluetooth audio playback screen 1Basic operationNOTEBluetooth audio playback screen 2](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-17.png)
![Wi-Fi18 EnYou can connect your Wi-Fi certfied mobile device to this product via Wi-Fi connection.Wi-Fi connection1Turn on the Wi-Fi function on the device.2Press .3Touch then .4Touch [Wi-Fi Settings].5Set [Wi-Fi] to [ON].6Touch [Device Information].7Connect this product with the dislayed network name in [Device Information] from the mobile device.Wi-Fi settings1Press .2Touch then .3Touch [Wi-Fi Settings].NOTEThis setting is available only when you stop your vehicle in a safe place and apply the parking brake.The menu items vary according to the source.Menu Item Description[Wi-Fi][ON] [OFF]Switches Wi-Fi connection on or off.[Device Information] Displays the network name and MAC address of this product.Wi-Fi audioBefore using the Wi-Fi audio player, connect the device to this product via Apple CarPlay (page 34) or Android Auto wirelessly (page 36).1Press then touch .2Touch [Wi-Fi Audio].The Wi-Fi audio playback screen appears.NOTES•[Wi-Fi Audio] is displayed as [Android Auto] when the Android Auto is in use.•[Wi-Fi Audio] is displayed as [Apple CarPlay] when the Apple CarPlay is in use.Wi-Fi audio screen (Example: Apple CarPlay)Wi-Fi audio with Apple CarPlay operation is same as the iPod source function. For details of the operation, refer to the iPod operation (page 30).Basic operation](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-18.png)
![AV sourceSupported AV source19EnEnglishYou can play or use the following sources with this product.•HD Radio Broadcasts (HD Radio™ tuner)•CD•ROM (compressed audio or video files on discs)•DVD-Video•Video-CDThe following sources can be played back or used by connecting an auxiliary device.•USB•SD•iPod•Pandora®•Bluetooth® audio•Wi-Fi audio (Apple CarPlay, Android Auto)•SiriusXM® Satellite Radio•AV input (AV)•AUX•HDMI•Wireless Mirroring•Car Sources (iDatalink)Displaying the AV operation screen1Press then touch the AV operation key.The AV operation screen appears.Displays the source list.Recalls equalizer curves (page 55).Selecting a source1Press then touch .2Touch the source icon.When you select [Source OFF], the AV source is turned off.1Press then touch the AV operation key.2Touch .3Touch the source key.When you select [Source OFF], the AV source is turned off.Changing the display order of sourceNOTEThis function is available only when you stop your vehicle in a safe place and apply the parking brake.1Press then touch .2Touch and hold the source icon and drag the icon to the desired position.1Press then touch the AV operation key.2Touch .3Touch .Source on the AV source selection screenSource on the source listChanging the display order of source iconsChanging the display order of source keys](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-19.png)
![20 En4Drag the source key to the desired position.Adjusting the range of favorite source icons areaNOTEThis function is available only when you stop your vehicle in a safe place and apply the parking brake.1Press .2Touch and hold . appears at the top left of the favorite source icons.3Drag to the desired position.To finish the adjusting, touch any place of the display except for the favorite source icons area.Setup for iPod/iPhone or smartphoneWhen using an iPod/iPhone or a smartphone with this product, configure settings of this product according to the device to be connected. This section describes the settings required for each device. NOTES•Operation methods may vary depending on the iPod/iPhone model or smartphone and its software version.•Depending on the software version of iPod/iPhone or the version of smartphone OS, it may not be compatible with this unit.•The setting may not be operable right after it is changed.•This setting is available only when a hands-free telephone is not used.•The setting will change after the following processes are automatically executed.– The source is turned off.– AppRadio Mode +, Apple CarPlay or Android Auto is exited.– The smartphone connection (USB and Bluetooth) is disconnected.iPod/iPhoneCompatible iPod/iPhone models•iPhone 7, 7 Plus•iPhone SE•iPhone 6, 6 Plus, 6s, 6s Plus•iPhone 5, 5c, 5s•iPod touch 5th, 6th generation•iPod nano 7th generationDepending on the iPod models, it may not be compatible with some AV sources. For details about iPod/iPhone compatibility with this product, refer to the information on our website.1Press .2Touch then .3Touch [Smartphone-related Settings].4Touch [Smartphone Setup].5Touch [iPhone/iPod].The available function icons are displayed.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-20.png)
![21EnEnglish6Touch [OK].Smartphone (Android™ device)Compatible smartphonesCompatibility with all smartphones is not guaranteed. For details about smartphone compatibility with this product, refer to the information on our website.1Press .2Touch then .3Touch [Smartphone-related Settings].4Touch [Smartphone Setup].5Touch [Others].6Touch [Android Auto] to use Android Auto. Touch [AppRadio Mode] to use AppRadio Mode +.The available function icons are displayed.7Touch [OK].HD Radio™ TechnologyAbout HD Radio stationsHD Radio stations offer high quality audio and data services. HD Radio stations are brought to you by your local FM or AM stations.HD Radio stations feature the following:•High quality audio•FM multicasting•Data service: Sub channelAM bandAnalog AMAnalog AM Digital AMFM bandAnalog FMAnalog FM Digital FMAnalog FM Digital FM-1chDigital FM-2chDigital FM-3ch: Main channelDigital, CD-quality sound. HD Radio Technology enables local radio stations to broadcast a clean digital signal. AM sounds like today’s FM and FM sounds like a CD.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-21.png)
![22 EnProgram Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant data streams.Adjacent to traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, original music as well as deep cuts into traditional genre.Visual information related to content being played on your HD Radio receiver, such as Album Art, historical photographs, still art from live broadcasts, among other related content.Starting procedure1Press then touch .2Touch [HD Radio].The HD Radio screen appears.Basic operationRecalls the preset channel stored to a key from memory.Stores the current broadcast frequency to a key.Displays the preset channel list.Select an item on the list ([1] to [6]) to switch to the preset channel.Selects the FM1, FM2, FM3 or AM band. Performs manual tuning.Performs seek tuning or non stop seek tuning.Releasing the key in a few seconds skips to the nearest station from the current frequency. Keep holding the key for long seconds to perform, performs non stop seek tuning.Switches the text display between the main channel and sub channels.HD Radio screenTIPS•By pressing then touch or , you can also switch the preset channels.•By pressing then touch and hold or and releasing it, you can also perform seek tuning.Storing the strongest broadcast frequencies (BSM)The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset channel keys [1] to [6].NOTES•Storing broadcast frequencies with BSM may replace those you have already saved.•Previously stored broadcast frequencies may remain stored if the number of frequencies stored has not reached the limit.1Touch the preset channel list display key.2Touch to begin search.While the message is displayed, the six strongest broadcast frequencies will be stored under the preset channel keys in the order of their signal strength.1Touch [Cancel].To cancel the storage process](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-22.png)
![Radio settings23EnEnglish1Press .2Touch then .The system setting screen appears.3Touch [AV Source Settings].4Touch [Radio Settings].The menu items vary according to the source.Menu Item Description[Blending][On] [Off]Switches to the analog broadcast of the same frequency level automatically when reception of a digital broadcast becomes weak. Select [Off] to receive only a digital signal.[Seek] Select the method of seek tuning.[Seek All] Seeks stations from both analog and digital broadcasting.[Seek HD] Only seeks stations from digital broadcasting.[Local][Off]FM: [Level1] [Level2] [Level3] [Level4]AM: [Level1] [Level2]Local seek tuning allows you to only tune into radio stations with sufficiently strong signals.[Level4] for FM and [Level2] for AM are available only with the stations with the strongest signals.DiscInserting and ejecting a discNOTEYou can play a normal music CD, Video-CD, or DVD-Video using the built-in drive of this product. WARNINGKeep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers. CAUTIONDo not insert anything other than a disc into the disc-loading slot.1Press .2Touch to open the LCD panel.3Insert a disc into the disc-loading slot.The source changes and then playback will start.NOTEIf the disc is already set, select [Disc] as the playing source.1Press .2Touch to open the LCD panel.3Remove the disc and press .Basic operationTIPS•By pressing then touch or , you can also skip files/chapters forward or backward.•By pressing then touch and hold or , you can also perform fast reverse or fast forward.•If a Video-CD with PBC (playback control) On is being played, appears.•You can set the screen size for the video image (page 60).Inserting a discEjecting a disc](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-23.png)
![25EnEnglish* PBC (playback control) onlySelects the audio output from [L+R], [Left], [Right], [Mix].This function is available for Video-CDs and DVDs recorded with LPCM audio.Changes the viewing angle (Multi-angle).This function is available for DVDs featuring multi-angle recordings.Sets a repeat play for all files/the current chapter/the current title.Displays the DVD menu keypad.If items on the DVD menu appear, the touch panel keys may overlay them. If so, select an item using these touch panel keys.Touch , , , or to select the menu item then touch .The way to display the menu differs depending on the disc.If you touch , you can operate the DVD menu directly. Resumes playback (Bookmark).This function is available for DVD-Video. You can memorize one point as a Bookmark for a disc (up to five discs). To clear the bookmark on the disc, touch and hold this key.Returns and begins playback from the specified point.This function is available for DVD-Video and Video-CDs featuring PBC (playback control).Video source screen 2Searches for the part you want to play.Touch [Title], [Chapter], [10key], or [Track] then input the desired number from [0] to [9].To start playback from the number you registered, touch .TIPS•To cancel an input number, touch [C]. •For DVD-Videos, you can select [Title], [Chapter] or [10Key].•For Video-CDs, you can select [Track] or [10key].*Skips files/chapters forward or backward.Performs fast reverse or fast forward.NOTETIP](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-25.png)
![Compressed filesInserting and ejecting media26 EnYou can play compressed audio, compressed video, or still image files stored in a disc or an external storage device. WARNINGKeep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers. CAUTION•Do not insert anything other than a disc into the disc-loading slot.•Do not insert anything other than SD memory cards into the SD card slot.•Ejecting an SD memory card during data transfer can damage the SD memory card. Be sure to eject the SD memory card by the procedure described in this manual.•Do not press when an SD memory card is not fully inserted. Doing so may damage the card.•Do not press before an SD memory card has been completely removed. Doing so may damage the card.1Press .2Touch to open the LCD panel.3Insert a disc into the disc-loading slot.The source changes and then playback will start.NOTEIf the disc is already set, select [Disc] as the playing source.1Press .2Touch to open the LCD panel.3Remove the disc and press .1Press .Inserting a discEjecting a discInserting an SD memory card2Touch to open the LCD panel.3Insert an SD memory card into the SD card slot.4Press .NOTES•This system is not compatible with the Multi Media Card (MMC).•Compatibility with all SD memory cards is not guaranteed.•This product may not achieve optimum performance with some SD memory cards.1Press .2Touch to open the LCD panel.3Press the middle of the SD memory card gently until it clicks.4Pull the SD memory card out straight.5Press .1Pull out the plug from the USB port of the USB cable.2Plug a USB storage device into the USB cable.NOTES•This product may not achieve optimum performance with some USB storage devices.•Connection via a USB hub is not possible.•A USB cable is required for connection.USB cableUSB storage deviceEjecting an SD memory cardPlugging a USB storage device](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-26.png)
![27EnEnglish1Pull out the USB storage device from the USB cable.NOTES•Check that no data is being accessed before pulling out the USB storage device.•Turn off (ACC OFF) the ignition switch before unplugging the USB storage device.Starting procedure1Insert the disc (page 26).TIPIf the disc is already set, select [Disc] as the playing source.1Insert the SD memory card into the SD card slot or plug the USB storage device into the USB connector. 2Press then touch .3Touch [USB] or [SD].Playback is performed in order of folder numbers. Folders are skipped if they contain no playable files.NOTES•For details on inserting SD card see on (page 26).•For details on plugging USB storage device, see on Plugging a USB storage device (page 26).Basic operationTIPS•By pressing then touch or , you can also skip files/chapters forward or backward.•By pressing then touch and hold or on the audio or video file, you can also perform fast reverse or fast forward.•You can set the screen size for the video and image files (page 60).Displays the link search screen.Touch the song to play back followed by touching the song information, after switching to Music Browse mode (page 28).If you touch the artwork, the list of songs in the album is displayed.This function is available for the external storage device (USB, SD) only.Switches between playback and pause.Switches the following media file types.[Music]: Compressed audio files[Video]: Compressed video files[Photo]: Image filesSkips files forward or backward.Switches the current music information display.Selects a file from the list.Touch a file on the list to playback.Touching a folder on the list shows its contents. You can play a file on the list by touching it.When you play compressed audio files stored in an external storage device (USB, SD), you can search for a file using Music Browse (page 28).Unplugging a USB storage deviceFor DiscFor USB/SDAudio source screen 1 (Example: USB)Audio sourceTIPNOTETIPNOTE](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-27.png)
![Selects the previous folder or the next folder.Sets a repeat play range for all files/the current folder/the current file.Plays files or does not play in random order.28 EnAudio source screen 2 (Example: USB)▶Selecting a file using Music Browse modeYou can select files to play back using the category list if the files contain tag information.NOTES•This function is available for the external storage device (USB, SD) only.•Music Browse mode cannot be held once the power is turned off.1Touch .2Touch the [Tag] tab.3Touch the desired category to display the file list.4Touch the item.Refine the item until the desired song title or file name is displayed on the list.5Touch the desired song title or file name to play back.If the selection made with Music Browse has been canceled, you can switch to Music Browse mode again by touching the [Tag] tab on the file/folder list screen and touching the desired track.TIPOnce the database is created in the USB storage, there is no need to create the database again as long as the same contents are saved. To enter the Music Browse mode directly, touch and then touch [Tag] before selecting the song. CAUTIONFor safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.Video source screen (Example: USB)Video sourceHides the touch panel keys.To display the keys again, touch anywhere on the screen.Switches between playback and pause.Switches the following media file types.[Music]: Compressed audio files[Video]: Compressed video files[Photo]: Image filesPerforms fast reverse or fast forward.Touch again to change the playback speed.Stops playback.Performs frame-by-frame playback.Performs slow-motion playback.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-28.png)
![29EnEnglishTIPS•Image files are not displayed in the rear display.•By pressing then touch and hold or on the still image file, you can search through 10 image files at a time. If the file currently being played is the first or last file in the folder, the search is not performed.Hides the touch panel keys.To display the keys again, touch anywhere on the screen.Switches between playback and pause.Switches the following media file types.[Music]: Compressed audio files[Video]: Compressed video files[Photo]: Image filesSkips files forward or backward.Selects the previous folder or the next folder.Rotates the displayed picture 90° clockwise.Sets a repeat play range for all files/the current folder.Plays all files in the current repeat play range or does not play them in random order.Selects a file from the list.Touch a file on the list to playback.Touching a folder on the list shows its contents. You can play a file on the list by touching it.Still image screenSets a repeat play range for all files/the current folder/the current file.Switches the audio/subtitle language.Selects a file from the list.Touch a file on the list to playback.TIPTouching a folder on the list shows its contents. You can play a file on the list by touching it.Skips files forward or backward.Performs fast reverse or fast forward.Still image sourceTIP](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-29.png)
![iPodConnecting your iPod30 EnWhen connecting an iPod to this product, the settings are automatically configured according to the device to be connected.NOTES•Depending on the generation or version of the iPod, some functions may not be available.•Do not delete the Apple Music® app from your iPod since some functions may not be available.•When connecting an iPhone or iPod touch, quit all applications before connecting the device. 1Connect your iPod via USB.2Press then touch .3Touch [iPod].NOTEFor details on USB connection, refer to the Installation Manual.Basic operationTIPS•By pressing then touch or , you can also skip files forward or backward.•By pressing then touch and hold or , you can also perform fast reverse or fast forward.NOTESkipping backward, fast reverse and fast forward are not available while playing Apple Music Radio.Displays the link search screen.Select a song from the list related to the song currently playing.If you touch the artwork, the list of songs in the album is displayed.This function is not available while playing Apple Music Radio.Switches between playback and pause.Skips files forward or backward.Selects a song from the list.Touch the category then the title of the list to playback of the selected list.•If you use English as the system language, the alphabet search function is available. Touch the initial search bar to use this function.•When you touch Apple Music Radio station in the list screen, Apple Music Radio screen appears (page 31).•Depending on the generation or version of the iPod, some functions may not be available.•Only 16 000 songs in the iPod are available in the list if the iPod has more than 16 000 songs. Available songs depend on the iPod.Audio source screen 1Audio sourceTIPNOTETIPSNOTES](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-30.png)
![Changes the audiobook speed.Normal—Fast—SlowThe audiobook speed icon may not change depending on the connected iPod/iPhone.Sets a repeat play range for all in the selected list/the current song.Plays songs within the selected list/album randomly.31EnEnglishAudio source screen 2 ImportantApple Music Radio may not be available in your country or region. For details about Apple Music Radio, visit the following site: http://www.apple.com/music/NOTEThis function is only available when using the iPod function with an iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5, iPhone 5c, or iPod touch (5th, 6th generation).1Touch .2Touch [Radio].Switches between playback and pause.Displays the pop-up menu for Apple Music Radio.•Touch [Play More Like This] to play back songs similar to the current song.•Touch [Play Less Like This] to set it not to play back the current song again.•Touch [Add to iTunes Wish List] to add the current song to the iTunes wish list.This function may not be used depending on your Apple Music account status.Skips tracks forward.NOTEApple Music® Radio sourceApple Music Radio screenNOTE](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-31.png)
![AppRadio Mode +32 EnYou can operate iPhone or smartphone applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product.Compatible iPhone modelsiPhone 5, 5c, 5s, 6, 6 Plus, 6s, 6s Plus, SE, 7, 7 PlusCompatible smartphone (Sound from AppRadio Mode + on some Android devices cannot be heard from the speakers of this unit.) models For details about Android device compatibility with this product, refer to the information on our website. NOTES•The compatible finger gestures vary depending on the application for an iPhone or a smartphone.•Copyright protected files such as DRM cannot be played.•AppRadio Mode + may be referred to as AppRadio Mode. WARNINGCertain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing.Using AppRadio Mode + Important•To use AppRadio Mode +, install the AppRadio app on the iPhone or smartphone in advance. For details about the AppRadio app, visit the following site: http://www.pioneerelectronics.com/PUSA/Car•Be sure to read Using app-based connected content (page 71).•Content and functionality of compatible applications are the responsibility of the App providers.•In AppRadio Mode +, usage is limited while driving, with availability of functions and content determined by the App providers.•AppRadio Mode + allows access to applications other than those listed, subject to limitations while driving.•PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.Starting procedureWhen connecting an iPhone or a smartphone to this product, settings are required according to the connected device. For details, refer to Setup for iPod/iPhone or smartphone (page 20).TIPS•Touch the desired application icon after the AppRadio app is launched.•If you connect your device to this product while an AppRadio Mode + compatible application is already running, the application operation screen will appear on this product.•The desired application is launched, and the application operation screen appears.•Press to go back to the top menu screen.Displays the current source.Displays the launcher application screen.Displays the previous screen.Displays the menu screen.AppRadio Mode +•Press then touch to hide the AppRadio Mode + SideControlBar.•Press then touch again to display the AppRadio Mode + SideControlBar again.• and are not available depending on the type of device.1Connect your iPhone to this product via USB.Refer to the Installation Manual.2Press .3Touch .4Touch [AppRadio Mode].For iPhone users](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-32.png)
![33EnEnglish5Touch desired icon in the tab.The AppRadio app is launched.NOTEThe video playback capability depends on the connected Android device.1Unlock your smartphone and connect it to this product via USB.Refer to the Installation Manual.2Press .3Touch .4Touch [AppRadio Mode].5Touch desired icon in the tab.The AppRadio app is launched.Using the keyboard (for iPhone users)When you tap the text input area of an application for iPhone, a keyboard will be displayed on the screen. You can input desired text directly from this product.NOTES•This function may not be available depending on your iPhone.•This function is only available in AppRadio Mode + on the iPhone. CAUTIONFor your safety, the keyboard functionality is only available when the vehicle is stopped and the parking brake is engaged.1Start up the AppRadio Mode +.2Touch the text input area on the application operation screen.A keyboard for entering text appears.TIPYou can select the keyboard language (page 51).Using the audio mix functionYou can output the audio mixing AV source and an application for iPhone or smartphone when AppRadio Mode + is used.NOTEDepending on the application or AV source, this function may not be available.For smartphone (Android) users1Start up the AppRadio Mode +. 2Press VOL (+/-).The audio mix menu will be displayed on the screen.NOTES•The audio mix menu is displayed for four seconds. If the screen disappears, press VOL (+/-) again. The screen reappears.•The AV operation screen and the Application screen can be switched by pressing .Touch to mute. Touch again to cancel mute.Sets whether to switch the sound mix function on or off.•Left tab: The audio mix function is enabled (mix on) and the App volume is displayed.•Right tab: The audio mix function is disabled (mix off). This is not displayed on the AV operation screen.Adjusts the application audio volume.•The App volume is not displayed when the right tab is selected.•You cannot adjust the volume of the main sound on the screen. Press VOL (+/-) to adjust the volume of the main sound.TIPThe AV operation screen and the Application screen can be switched by pressing .](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-33.png)
![Apple CarPlay34 EnYou can operate iPhone applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product.Compatible iPhone modelsFor details about compatibility of iPhone models, refer to the following website. http://www.apple.com/ios/carplayNOTEThe compatible finger gestures vary depending on the application for the iPhone. WARNINGCertain uses of the iPhone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing.Using Apple CarPlay ImportantApple CarPlay may not be available in your country or region.For details about Apple CarPlay, visit the following site:http://www.apple.com/ios/carplay•The content and functionality of the supported applications are the responsibility of the App providers.•In Apple CarPlay, usage is limited while driving, with availability of functions and content determined by the App providers.•Apple CarPlay allows access to applications other than those listed that are subject to limitations while driving.•PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.Setting the driving positionTo achieve optimum usability of Apple CarPlay, set the driving position setting correctly according to the vehicle. The setting will be applied the next time an Apple CarPlay compatible device is connected to this product.1Press .2Touch then .The system setting screen appears.3Touch [Smartphone-related Settings].4Touch [Driving Position].[Left]Select for a left-hand drive vehicle.[Right]Select for a right-hand drive vehicle.Starting procedureWhen connecting an iPhone to this product, settings are required according to the connected device. For details, refer to Setup for iPod/iPhone or smartphone (page 20).1Connect an Apple CarPlay compatible device to this product via USB.2Press .3Touch .4Touch [Apple CarPlay].5Touch the Apple CarPlay icon in the tab.The application screen appears.Before using Apple CarPlay wirelessly, connect the device to this product via Bluetooth and turn on Apple CarPlay in the Bluetooth setting menu of the device (page 13).1Turn on the Wi-Fi function on the device. 2Press .3Touch .The device search screen appears.Touch then skip to step 4 since the device list screen appears if Apple CarPlay had previously been used wirelessly with the device.NOTEThe unit cannot detect the device unless the Bluetooth or Apple CarPlay setting menu is displayed on the iPhone screen.4Touch .5Touch a desired device on the screen.Wired connectionWireless connection](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-34.png)
![35EnEnglishThe unit configures the connection then start the application.TIPYou can also start Apple CarPlay with a desired device by opening the Bluetooth or Apple CarPlay setting menu while displaying the device search or device list screen.TIPYou can use Siri function by pressing once Apple CarPlay is activated.NOTES•For details on USB connection, refer to the Installation Manual.•If an Apple CarPlay compatible device has been connected and another screen is displayed, touch [Apple CarPlay] on the top menu screen to display the Application menu screen.•The Bluetooth connection with the Apple CarPlay compatible device will be terminated automatically if Apple CarPlay is turned on. While Apple CarPlay is turned on, only a Bluetooth audio connection will be possible for devices other than the device connected via Apple CarPlay.•Hands-free phoning via Bluetooth wireless technology is not available while Apple CarPlay is on. If Apple CarPlay is turned on during a call on a cellular phone other than an Apple CarPlay compatible device, the Bluetooth connection will be terminated after the call ends.Adjusting the volumeYou can adjust the guidance volume separately from the main sound volume when Apple CarPlay is used.1While Apple CarPlay is activated, press VOL (+/-).The volume menu will be displayed on the screen.Touch to mute. Touch again to cancel mute.Touch [+]/[-] to adjust the guidance volume.Displays the main sound volume. To adjust the main sound volume, press VOL (+/-) on the unit.NOTEThe volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The menu reappears.Android Auto™You can operate Android applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product.Compatible Android devicesFor details about compatibility of Android models, refer to the following website. https://support.google.com/androidautoNOTEThe compatible finger gestures vary depending on the application for the smartphone. WARNINGCertain uses of the smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing.Using Android Auto ImportantAndroid Auto may not be available in your country or region.For details about Android Auto, please refer to the Google support site:http://support.google.com/androidauto•The content and functionality of the supported applications are the responsibility of the App providers.•In Android Auto, usage is limited while driving, with availability of functions and content determined by the App providers.•Android Auto allows access to applications other than those listed that are subject to limitations while driving.•PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.Setting the driving positionTo achieve optimum usability of Android Auto, set the driving position setting correctly according to the vehicle. The setting will be applied the next time an Android Auto compatible device is connected to this product.1Press .2Touch then .The system setting screen appears.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-35.png)
![36 En3Touch [Smartphone-related Settings].4Touch [Driving Position].[Left]Select for a left-hand drive vehicle.[Right]Select for a right-hand drive vehicle.Starting procedureWhen connecting a smartphone to this product, settings are required according to the connected device. For details, refer to Setup for iPod/iPhone or smartphone (page 20).1Connect an Android Auto™ compatible device to this product via USB.2Press .3Touch .4Touch [Android Auto].5Touch the Android Auto icon in the tab.A Bluetooth connection with the Android Auto compatible device is automatically established and a Bluetooth connection with any other devices are terminated.Before using Android Auto wirelessly, connect the device to this product via Bluetooth (page 13).1Turn on the Wi-Fi function on the device.2Press .3Touch .The device search screen appears.Touch then skip to step 4 since the device list screen appears if Android Auto had previously been used wirelessly with the device.NOTEThe unit cannot detect the device unless the Bluetooth setting menu is displayed on the smartphone screen.4Touch .Wired connectionWireless connection5Touch a desired device on the screen.The unit configures the connection then start the application.TIPYou can use voice recognition function by pressing once Android Auto is activated.NOTES•For details on USB connection, refer to the Installation Manual.•If twenty devices are already paired, the message confirming whether to delete the registered device is displayed. If you want to delete the device, touch [Agree]. If you want to delete other device, touch [BT Settings] and delete the devices manually (page 14).•If Android Auto is turned on during a call on a cellular phone other than the Android Auto compatible device, the Bluetooth connection will switch to the Android Auto compatible device after the call.Adjusting the volumeYou can adjust the guidance volume separately from the main sound volume when Android Auto is used.1While Android Auto is activated, press VOL (+/-).The volume menu will be displayed on the screen.Touch to mute. Touch again to cancel mute.Touch [+]/[-] to adjust the guidance volume.Displays the main sound volume. To adjust the main sound volume, press VOL (+/-) on the unit.NOTEThe volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The menu reappears.Setting the auto-launch functionIf this function is set to on, Android Auto will launch automatically when an Android Auto compatible device is connected to this product.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-36.png)
![37EnEnglishNOTEAndroid Auto will launch automatically only when an Android Auto compatible device is correctly connected to this product.1Press .2Touch then .3Touch [Smartphone-related Settings].4Touch [Android Auto Auto-launch] to switch [On] or [Off].Pandora®Pandora Music is a music service not affiliated with Pioneer. More information is available at http://www.pandora.com.The Pandora mobile application is available for iPhone and smartphones. Please visit www.pandora.com/everywhere/mobile for the latest compatibility information. WARNINGCertain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions.If in doubt as to a particular function, only perform it while the car is parked.No feature should be used unless it is safe to do so under the driving conditions you are experiencing. ImportantCreate a free or a paid account online. You can create the account in the Pandora application from your iPhone or smartphone, or from the website (http://www.pandora.com/account/register).Limitations:•The Pandora service is subject to change without notice. The service could be affected by any of the following: firmware version of the iPhone or smartphone, firmware version of the Pandora application, changes to the Pandora music service.•Certain functions of the Pandora service are not available when accessing the service through Pioneer car audio/video products. They include, but are not limited to the following: sending information about current stations, buying tracks from iTunes App Store or Google Play, viewing additional text information, logging in to Pandora, adjusting Cell Network Audio Quality.NOTEIn this chapter, iPhone and iPod touch will be referred to as "iPhone". Listening to PandoraUpdate the firmware of the Pandora application to the latest version before use.1Unlock the mobile device and connect it to this product.•iPhone via USB or Bluetooth•Smartphone via Bluetooth2Press then touch .3Touch [Pandora].4Launch the Pandora application on the mobile device and start playback.NOTES•For details on Bluetooth connection, see page 13.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-37.png)
![38 En•For details on USB connection, refer to the Installation Manual.Basic operationRecalls the preset station stored to a key from the memory.Stores the current station to a key.Displays the preset station list.Select an item on the list ([1] to [6]) to switch to the preset station.Switches between playback and pause.Skips tracks forward.By pressing then touch , you can skip songs forward.*Gives a Thumbs Up to the playing track.*Gives a Thumbs Down to the playing track and skips to the next track.Switches among connected devices.Selects a Pandora station from the list.•: Switches to the station list.•: Switches to the genre list.•: Plays only one track based on particular musical characteristics from several shuffled stations.•: Deletes the station.•A-Z: Sorts the items in the list alphabetically.•Date: Sorts the items in the list in the order of the dates.Shared stations are indicated by .Playback screen 1TIP* and are not available when using a shared station.Creates a new station.Touch [Track] or [Artist] to create a new station.Adds information for the track currently playing to bookmarks.Playback screen 2TIP](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-38.png)
![SiriusXM® Satellite Radio39EnEnglishOnly SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy, and entertainment. Welcome to the world of satellite radio. A SiriusXM Connect Vehicle Tuner and Subscription are required. For more information, visit the website (www.siriusxm.com).To take full advantage of all the SiriusXM capabilities, such as TuneMix™, SportsFlash™ and Traffic & Weather Now™, please use the SXV300 tuner or later version (sold separately). Other tuners are compatible but may limit the features.Subscribing to the SiriusXM Satellite Radio service1Press then touch .2Touch [SiriusXM].You should be able to tune in to Channel 1. If you cannot get Channel 1, ensure that your SiriusXM Connect Vehicle Tuner is installed correctly.3Switch to Channel 0 and check the Radio ID.The SiriusXM Radio ID can be found by tuning in to Channel 0.In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner and its packaging.You will need this number to activate your subscription.NOTEThe SiriusXM Radio ID does not include the letters I, O, S, or F.4Activate the service either online or by phone.TIPIn the USA, you can activate online or by calling SiriusXM Listener Care:•Visit the website www.siriusxm.com/activatenow•Call SiriusXM Listener Care at 1-866-635-2349For Canadian subscriptions, please contact:•Visit the website www.siriusxm.ca/activatexm and click on "ACTIVATE RADIO" at the top right corner of the page, or call (1-877-438-9677).NOTES•The SiriusXM satellites will send an activation message to your tuner. When the tuner has received the message, [Subscription Updated] is displayed.•The activation process usually takes 10 to 15 minutes, but it may take up to an hour. Your radio will need to be powered on and receiving the SiriusXM signal to receive the activation message.Listening to SiriusXM1Press then touch .2Touch [SiriusXM].Basic operationTIPS•By pressing then touch or , you can move the preset channels up or down on the current channel screen, and skip files forward or backward on the play time indicator screen.•By pressing then touch and hold or , you can move channels up or down on the current channel screen, and perform fast reverse or fast forward on the play time indicator screen.•On the Featured Favorites Band, the current broadcast frequency cannot be stored to a key (page 41).•If fewer than two music channels are stored as presets, you cannot use the TuneMix function.•[RADIO ID] is displayed when Channel 0 is selected.Current channel display (Live broadcast mode)Memorizes the current channel content information for the alert function (page 41).Selects a channel directly.Recalls the preset channel stored to a key from the memory.Stores the current channel to a key.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-39.png)
![40 EnDisplays the preset channels.Select an item on the list ([1] to [6]) to switch to the preset channel.Selects a band.There are 4 bands. You can store 6 channels per band for a total of 24 presets.Performs TuneScan™ (page 40).Switches TuneMix™ to on or off.You can use TuneMix™ to play a unique blend of songs from each of the music channels stored as presets on the current band.NOTES•When fewer than two music channels are stored as presets, you cannot use TuneMix™.•Locked channels will not be used by TuneMix™ until the channels are unlocked by entering the parental control passcode.•TuneMix™ is only compatible with SXV300 or later tuner models.Performs channel number down/up.Performs fast channel number down/up.Switches to the channel broadcasting the traffic and weather information for the selected city (Traffic & Weather Now™).Touch the Traffic & Weather Now™ button and you will be able to hear the latest report for the selected city from the beginning.To cancel Traffic & Weather Now™, touch .TIPS•Grayed out: Traffic and weather broadcast for your market is not yet available.•With green dot: Latest report available, but not listened to yet.•White: Latest report available to hear again.•To listen to the information again, touch on the current channel display.•If you have already selected the city, you can listen to the information only by touching .NOTES•To use this function, select the city in advance (page 42).•The selected city can be changed in the Sirius XM settings (page 42).•Traffic & Weather Now™ is only compatible with SXV300 or later tuner models.Switches between live broadcast mode and Replay Mode.Replay Mode (Time bar display)When you activate the TuneScan™ feature, you will hear a few seconds of the songs which have not been listened to from each of the music channels stored as presets on the current band.NOTES•When fewer than two music channels are stored as presets, you cannot use TuneScan™.Selects a channel from the list.Select the category name or the list of all channels then touch the desired channel.To switch the display list, touch .TIPS•The displayed list switches in the following order. Channel Name—Artist Name—Song Title—Content Info•If you touch , you can scan each channel in the selected category.NOTES•The types of categories available depend on the types of channels available.•It may take time to display the channel list depending on the SiriusXM reception condition.Switches between playback and pause.Performs content forward or backward.Performs fast forward or rewind.Switches between live broadcast mode and Replay Mode.TuneScan™](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-40.png)
![41EnEnglish•TuneScan™ may take a few minutes to become available after the product is turned on or the preset band is changed.•Tune Scan™ is compatible with SXV200 or later tuner models.1Touch to display the following display.Continues playing the current scanning song or channel.Skips to the previous/next song during TuneScan™ or to the previous/next channel during category scan.Cancels scan play and returns to the previous channel.SportsFlash™SportsFlash™ will notify you when a big play happens during a game with one of your favorite sports teams.Choose to tune in and hear the play unfold like it was live. Continue listening to the game, or you can return to your previous channel.For details, see [SportsFlash] (page 42) and [SportsFlash List] (page 42) in SiriusXM settings.NOTESportsFlash™ is only compatible with SXV300 or later tuner models.SmartFavoritesAll preset channels will buffer the content to be used for Replay, TuneStart, TuneScan and TuneMix features.NOTESmartFavorite is compatible with SXV200 or later tuner models.Using Featured Favorites BandFeatured Favorites are groups of channels that are created by the SiriusXM Programming department allowing you to discover new channels. Featured Favorite channels are dynamic and can change often, allowing you to discover new channels. For details, see [Featured Favorites] and [Featured Band Update Messages] in SiriusXM settings (page 42).When there is a Featured Favorite, access it with the band key.1Touch the band key.SXM1—SXM2—SXM3—FFWhen there are multiple Featured Favorites, access them from the category list.It is displayed at the bottom of the category list (page 40).Parental lockThe Parental Control feature allows you to limit access to any SiriusXM channels, including those with mature content. When enabled, the Parental Control feature requires you to enter a passcode to tune to the locked channels.For details, see [Parental Control] in SiriusXM settings (page 42).Using the content alerts functionThe song titles, artist names, and your favorite sport teams that you are listening to can be memorized on an alert list.When a program that matches a keyword memorized to the alert list is broadcast, a beep sounds and a message is displayed. For Details, see [Alert List](page 42) in SiriusXM settings .NOTES•You can register up to 50 keywords in the alert list.•You can enable or disable alerts by setting the alert function.•The radio will display an alert message when a matching artist, song, or team is found on another channel. Touch [Jump] to switch to the channel. If you touch [Stay], the channel will not switch.1On the current channel content information area, touch the item for which you want an alert.2Touch [OK] for the artist or song, or touch [Team1] or [Team2] for the game.How to accessMemorizing the current contents](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-41.png)
![42 EnTIPTo set the alert function, you can set up at [Alert List] (page 42) in the [SiriusXM Settings].SiriusXM settings1Press .2Touch then .The system setting screen appears.3Touch [AV Source Settings].4Touch [SiriusXM Settings].The menu items vary according to the source.Menu Item Description[Tune Start][On] [Off]Start songs automatically from the beginning when you tune to one of your preset channels in the current preset band when TuneStart™ is turned on.[Parental Control] Enter the current passcode then touch to set this function (the default passcode is 0000).•To edit the passcode, touch [Edit Code] then touch followed by entering the new passcode.•To lock the channel, touch the appropriate channel. appears and the channel is locked.•When you touch the locked channel, the channel is unlocked.•When you touch [Clear All], all locked channels are unlocked.[Alert List] Select to activate the alert function of each memorized alert list by touching by [Alert On] or [Alert Off].•Touch [Delete All] to delete all items memorized to the alert list.•If you touch and hold the list item, you can delete the item from the list.[Team Settings] Set to notify you when games involving your favorite sports teams are about to start.1Select your favorite league in the list screen.2Touch your favorite team in your selected league to switch the alert on or off.[Featured Favorites][On] [Off]Set to [On] to allow you to discover new channels created by the SiriusXM Programming department.If the Featured Favorite Band needs to update, the Featured Band Update message will appear.[Featured Band Update Messages][On] [Off]To be notified when the featured seasonal theme is updated.To display [Featured Band Update Messages] at all times, [Featured Favorites] needs to be set to [On].[SportsFlash][On] [Off]Activates the SportsFlash™ function.•Touch [Play] to listen to the notified channel.•Touch [Ignore] to stay tuned to the current channel.•Touch [Cancel] to cancel notifications regarding the game.[SportsFlash List] Select favorite teams for SportsFlash™.•Touch [Edit List] then select a league and team to set the favorite.•You can touch an item again to deselect it.•If you want to remove all the teams you have set, touch [Clear All].Setting of prioritiesIf you set many Favorite Teams, SportsFlash™ notifications can be received for up to 5 Favorite Teams at once. Set the priorities if more than six teams are set as Favorite Teams.1Touch [Prioritize] on the team selection screen.2Select the five high priority teams from the selected favorite teams.[City Setting] Select the city for the latest traffic and weather report in Traffic & Weather Now™.[SiriusXM Reset] Set to restore to the default SiriusXM settings by touching [Restore].Do not turn off the engine while restoring the settings.•This setting is available only when you stop your vehicle in a safe place and apply the parking brake.•The source is turned off and the Bluetooth connection is disconnected before the process starts.TIPSTIPSNOTETIPTIPS CAUTIONNOTESMenu Item Description](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-42.png)
![HDMI43EnEnglish CAUTIONFor safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.NOTEA High Speed HDMI® Cable (sold separately) is required for connection. For details, refer to the Installation Manual.Starting procedure1Press then touch .2Touch [HDMI].The HDMI source screen appears.Basic operationHides the touch panel keys.To display the keys again, touch anywhere on the screen.You can set the screen size for the video image (page 60).AUXHDMI source screenTIPYou can display the video image output by the device connected to video input. CAUTIONFor safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.NOTES•A Mini-jack AV cable (CD-RM10) (sold separately) is required for connection. For details, refer to the Installation Manual.•You can set the screen size for the video image (page 60).Starting procedure1Press .2Touch then .3Touch [Input/Output Settings].4Confirm that [AUX Input] is turned on.5Press then touch .6Touch [AUX].The AUX screen appears.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-43.png)
![Basic operationHides the touch panel keys.To display the keys again, touch anywhere on the screen.You can set the screen size for the video image (page 60).Switches between the video input and audio input.AV input44 EnAUX screenTIPYou can display the video image output by the device connected or the camera to video input. For details, refer to the Installation Manual. CAUTIONFor safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.Starting procedure1Press .2Touch then .3Touch [Input/Output Settings].4Touch [AV Input].5Touch [Source] for AV source or [Camera] for camera.6Press then touch .7Touch [AV] for AV source or [Camera View] for camera.The image is displayed on the screen.NOTEIf [Source] is selected, [2nd Camera Input] is automatically set to [Off] (page 50).](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-44.png)
![Basic operationHides the touch panel keys.To display the keys again, touch anywhere on the screen.Wireless Mirroring45EnEnglishAV source screen(This function is available only for Android device.)Wireless Mirroring is a wireless display designed to mirror your mobile device on this product screen via Wi-Fi connection.Starting procedureWireless Mirroring operations and procedures vary depending on the connected mobile device. Refer to the instruction manual that came with your mobile device. CAUTIONFor safety reasons, this function is available only when you stop your vehicle in a safe place and apply the parking brake.1Press .2Touch then .3Touch [Wi-Fi Settings].4Confirm that [Wi-Fi] is turned on.5Press then touch .6Touch [Mirroring].A connection is configured then the instruction message appears on the display.NOTES•When Apple CarPlay or Android Auto with wireless connection is activated, the connection swtiching confirmation screen appears. Touch [Yes] to proceed to Wireless Mirroring.•When the Wi-Fi connection is set to [OFF], the connection confirmation screen appears. Touch [Start] to make the connection.7Make a Wireless Mirroring connection on the mobile device.8Touch [Yes].The Wireless Mirroring screen appears.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-45.png)
![Basic operationDisplays Full screen.[Disconnect] Disconnects Wireless Mirroring.46 EnWireless Mirroring screen (Example)NOTES•The screen shown in the example may differ from the connected mobile device.•If the Android device is not ready for Miracast UIBC, you cannot perform touch operation.iDatalinkUsing iDatalinkYou can access the satellite radio source provided for the vehicle. The vehicle information and many OEM systems such as steering wheel controls, warning chimes, driver safety systems, and etc. can be displayed on this product by connecting the optional iDatalink adapter. It is also possible to add visual screens such as gauges, vehicle information, climate control, and parking assist. However, an extra interface module is required to access these features. NOTESince the type of module varies depending on the vehicle model, search for your vehicle at the following URL to determine what features are available for each module. Remember to select the correct radio model for accurate results.http://maestro.idatalink.com/ Important•For details about vehicle models that are compatible with the iDatalink adapter, refer to the information on our website.•For information on installing the iDatalink adapter, refer to the install guide of the iDatalink adapter. •After installing the iDatalink adapter, be sure to check the operations.•Functions and displays vary depending on the vehicle model. For details of the functions available for each model, refer to the information on our website.•Please note that the device number of this product and a computer with internet access are required to program your Maestro RR module. For troubleshooting information about iDatalink functions, visit the following website. http://maestro.idatalink.com/supportLimitations•The data is transmitted to this product from your vehicle system via the connected iDatalink adapter. Therefore, the actual data contents displayed on your product may be different from the contents on the screen described in this manual.•When information on your vehicle or on the devices of your vehicle is sent from the iDatalink Maestro module, a screen notifying you of such information may pop up.Activating iDatalink MaestroBefore using and/or connecting the iDatalink Maestro adapter, you will need to first flash the Maestro RR module with the appropriate vehicle and head unit firmware. 1Find the device number (12 alphanumeric characters) on the label on the packaging of this product or on the product itself.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-46.png)
![47EnEnglish2Access the following website and follow the on-screen instructions to configure the desired firmware.http://maestro.idatalink.com/NOTEWhen the serial number input is required, input the device number of this product.3Install the vehicle/head unit specific firmware on your iDatalink Maestro module.4Connect this product to iDatalink Maestro, and then install this product to the vehicle.The iDatalink function will be active.NOTES•Device number input is required for updating the iDatalink Maestro module. Take a note of the device number as necessary.•For details on installing the firmware, refer to iDatalink Maestro website.•For details on connecting this product to iDatalink Maestro, refer to the Installation Manual.•You can also check the device number on the [Firmware Information] screen of this product (page 52).Starting procedure1Connect the iDatalink Maestro adapter to this product.For details, refer to the Installation manual.2Press then touch .3Touch [Car Sources] or [Car Features].The touched menu screen appears.These operations are almost similar to the built in AV sources of this product. For details of the operations, refer to the related pages.•USB/iPod operations (page 26) (page 30)•SiriusXM tuner operations (page 39)•Bluetooth audio operations (page 16)•Hands-free phone operations (page 14)You can check and operate the following screens after selecting [Car Features] in the starting procedure. Touch one of the icons on the left side of the screen to change the feature.Displays the Gauge screen.Displays the Vehicle Information screen.Displays the Climate screen.Displays the Parking Assist screen.Using functions in Car SourcesUsing functions in Car FeaturesGauges screenVehicle Information screen](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-47.png)
![Displaying obstacle detection information48 EnClimate screenParking Assist screen CAUTIONThis function is intended solely to assist the driver’s vision. It does not detect all dangers and obstacles and is not a substitute for your attentiveness, judgment, and care while parking your vehicle.NOTEThis function is only available for vehicles equipped with a parking sensor system.iDatalink settings1Press .2Touch then .3Touch [OEM Settings] or [OEM Volume Settings].The setting screen for iDatalink appears.Menu Item Description[OEM Settings] Setting for iDatalink function when the iDatalink adapter is connected to the unit.[OEM Volume Settings] Setting for iDatalink function volume when the iDatalink adapter is connected to the unit.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-48.png)
![Settings49EnEnglishYou can adjust various settings in the main menu.Displaying the setting screen1Press .2Touch .3Touch one of the following categories, then select the options. System settings (page 49) Theme settings (page 53) Audio settings (page 54) Video settings (page 58) Bluetooth settings (page 13) System settingsThe menu items vary according to the source.Menu Item Description[Radio Settings] (page 23)[SiriusXM Settings] (page 42)[Bluetooth Audio][On] [Off]Setting Bluetooth audio source activation.Menu Item Description[Smartphone Setup] Setting the connected mobile device (page 20).[Driving Position][Right] [Left]Setting the driving position.•Apple CarPlay (page 34)•Android Auto™ (page 35)[Android Auto Auto-launch][On] [Off]Select [On] to automatically launch Android Auto when an Android device is connected to the unit.Menu Item Description[AppRadio Mode Sound] Set where the sound for AppRadio Mode + is output when it is used with a smartphone.[AVH] The sound is output from the speakers of this unit.[Smartphone] The sound is output from the speakers of the smartphone.With an iPhone, the sound is always output from the speakers of this unit.[AV Input][Source] [Camera] [Off]Select AV input source (page 44).[AUX Input][On] [Off]Set to [On] for AUX source (page 43).[AV Source Settings][Smartphone-related Settings]A separately sold rear view camera (e.g. ND-BC8) is required for utilizing the rear view camera function. (For details, consult your dealer.)▶Rear view cameraThis product features a function that automatically switches to the full-screen image of the rear view camera installed on your vehicle when the shift lever is in the REVERSE (R) position.Camera View mode also allows you to check what is behind you while driving.▶Camera for Camera View modeCamera View can be displayed at all times. Note that with this setting, the camera image is not resized to fit, and that a portion of what is seen by the camera is not viewable.To display the camera image, touch [Camera View] on the AV source selection screen (page 19).NOTES•To set the rear view camera as the camera for Camera View mode, set [Back Camera Input] to [On] (page 50).•When using the 2nd camera, set [AV Input] to [Camera] (page 44).[Input/Output Settings]NOTE[Camera settings]Menu Item Description](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-49.png)
![50 En•When the camera view of both the rear view camera and 2nd camera are available, the key to switch the display appears. Touch this key to switch the display between the rear view image and 2nd camera image. CAUTIONPioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed. •Immediately verify whether the display changes to the rear view camera image when the shift lever is moved to REVERSE (R) from another position.•When the screen changes to full-screen rear view camera image during normal driving, switch to the opposite setting in [Reverse Gear Setting].•If you touch while the camera image is displayed, the displayed image turns off temporarily.•When the camera view of both the rear view camera and 2nd camera are available, the key to switch the display appears. Touch this key to switch the display between the rear view image and 2nd camera image.Menu Item Description[Camera View][On] [Off]Set to [On] to display camera view at all times. (The same mode is turned on when is touched on the camera view screen. The setting value is synchronized.)•To set the rear view camera as the camera for Camera View mode, set [Back Camera Input] to [On] (page 50).•When using the second camera, set [AV Input] to [Camera] or [2nd Camera Input] to [On] (both settings are synchronized) (page 50).You can also turn this function on by touching [Camera View] on the AV source selection screen or in the source list.[Back Camera Input][Off] [On]Setting the second camera activation (front camera, etc.).Setting rear view camera activation.[2nd Camera Input][Off] [On]Setting the second camera activation (front camera, etc.).This function is synchronized with [AV Input] setting.[Reverse Gear Setting] Setting the polarity of the rear view camera.[Battery] The polarity of the connected lead is positive.[Ground] The polarity of the connected lead is negative.If the camera polarity setting is wrong, or wrong camera setting is made, press RESET button to release the rear view camera screen and then change the camera polarity setting to [Battery].[Back Camera: Reverse Video]*[Off] [On]Set whether to reverse the rear view camera images to be displayed on the front screen.This function is available when [Back Camera Input] is set to [On] (Page XX).[2nd Camera: Reverse video]*[Off] [On]Setting the reversed image.This function is available when [AV Input] is set to [Camera] or [2nd Camera Input] is set to [On] (page 50).NOTESTIPNOTE* This setting is available only when you stop your vehicle in a safe place and apply the parking brake.Menu Item Description[Wi-Fi Settings] (page 18)Menu Item Description[Demo Mode][On] [Off]Setting the demo mode.Menu Item Description[System Language] Select the system language.•If the embedded language and the selected language setting are not the same, the text information may not display properly.•Some characters may not be displayed properly.Touch [Restore] to restore the settings to the default settings. CAUTIONDo not turn off the engine while restoring the settings.NOTENOTE[Wi-Fi Settings][Demo Mode][System Language]NOTES[Restore Settings]Menu Item Description](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-50.png)
![51EnEnglishNOTEThis setting is available only when you stop your vehicle in a safe place and apply the parking brake.Menu Item Description[All Settings] Almost all settings or recorded content returns to the default.[Audio Settings] Restore to default Audio settings.This setting is available when the source is turned off.[Theme Settings] Restore to default Theme settings.[Bluetooth Settings] Restore to default Bluetooth settings.Menu Item Description[Keyboard] You can use the keyboard in AppRadio Mode + by setting the language of the keyboard for iPhone.•Set the same system language setting as the iPhone to operate this function properly.•This function is only available in AppRadio Mode + on the iPhone.Menu Item Description[Beep Tone][On] [Off]Select [Off] to disable the beep sound when the button is pressed or the screen is touched.If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel screen.NOTES•Do not use sharp pointed tools such as ballpoint or mechanical pens. They may damage the screen.•Do not turn off the engine while saving the adjusted position data.•This setting is available only when you stop your vehicle in a safe place and apply the parking brake.Menu Item Description[Touch Panel Calibration] 1Touch two corners of the screen along the arrows then touch the centers of the two [+] marks at the same time twice.2Press .3Press once again.4Gently touch the center of the [+] mark displayed on the screen.5Press and hold .NOTE[Keyboard]NOTES[Beep Tone][Touch Panel Calibration]NOTEThis setting is available only when you stop your vehicle in a safe place and apply the parking brake.The adjustment results are saved.Proceed to 16-point adjustment.The target indicates the order.•When you press , the previous adjustment position returns.•When you press and hold , the adjustment is canceled.The adjustment results are saved.[Dimmer Settings]Menu Item Description[Dimmer Trigger] Setting the dimmer brightness.[Auto] Switches the dimmer to on or off automatically according to your vehicle’s headlight turning on or off.[Manual] Switches the dimmer to on or off manually.[Time] Switches the dimmer to on or off at the time you adjusted.[Day/Night] Setting the dimmer duration by day or night.You can use this function when [Dimmer Trigger] is set to [Manual].[Day] Turns the dimmer function to off.[Night] Turns the dimmer function to on.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-51.png)
![52 EnYou can adjust the picture for each source and rear view camera. CAUTIONFor safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable these functions, you must stop in a safe place and apply the parking brake.To adjust following menu, touch , , , to adjust.Menu Item Description[Brightness][-24] to [+24]Adjust the black intensity.[Contrast][-24] to [+24]Adjust the contrast.[Color]*[-24] to [+24]Adjust the color saturation.[Hue]*[-24] to [+24]Adjust the tone of color (which color is emphasized, red, or green).[Dimmer Level][+1] to [+48]Adjust the brightness of the display. [Temperature][-3] to [+3]Adjust the color temperature, resulting in a better white balance.[Dimmer Duration] Adjust the time that the dimmer is turned on or off by dragging the cursors or touching or .You can use this function when [Dimmer Trigger] is set to [Time].TIPS•Each touch of or moves the cursor backward or forward in the 15 minute width.•When the cursors are placed on the same point, the dimmer available time is 0 hours.•When the cursor for off time setting is placed on the left end and the cursor for on time setting is placed on the right end, the dimmer available time is 0 hours.•When the cursor for on time setting is placed on the left end and the cursor for off time setting is placed on the right end, the dimmer available time is 24 hours.NOTEThe time display of the dimmer duration adjusting bar depends on the clock display setting (page 60).[Picture Adjustment]Menu Item Description * With some pictures, you cannot adjust [Hue] and [Color].NOTES•The adjustments of [Brightness], [Contrast], and [Dimmer Level] are stored separately when your vehicle's headlights are off (daytime) and on (nighttime).•[Brightness] and [Contrast] are switched automatically depending on the setting of [Dimmer Settings].•[Dimmer Level] can be changed the setting or the time to switch it to on or off (page 51).•The picture adjustment may not be available with some rear view cameras.•The setting contents can be memorized separately.[System Information]Menu Item Description[Firmware Information] Displays the firmware version.TIPYou can also check the open source license of the functions that this product is equipped with by touching [License] in this menu.[Firmware Update] CAUTION•The external storage device for updating must contain only the correct update file.•Never turn this product off, eject the SD memory card or disconnect the USB storage device while the firmware is being updated.•You can only update the firmware when the vehicle is stopped and the parking brake is engaged.•You cannot update the old firmware version once the latest firmware is updated.1Download the firmware update files into your computer.2Connect a blank (formatted) storage device to your computer then locate the correct update file and copy it onto the USB storage device.3Set the external storage device to this product (page 26).4Turn the source off (page 26).5Display the [System] setting screen (page 49).6Touch [System Information].7Touch [Firmware Update].8Touch [Continue].Follow the on-screen instructions to finish updating the firmware.NOTEIf an error message appears on the screen, touch the display and perform the above steps again.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-52.png)
![53EnEnglish[3D Calibration Status] Check the sensor learning status, such as the degree of learning. You can also check the current sensor values and the total number of speed pulses.To delete the learned results stored in the sensor, follow the below instructions.1Touch [Distance] or [Speed Pulse], and then touch [Yes].2Touch [Learning] and then touch [Reset All].TIPTouch [Reset All] to reset the sensor after changing the installation position or angle.NOTEIf you touch [Reset Distance], all learned results stored in [Distance] are cleared.[Connection Status] Check that the leads are properly connected between this product and vehicle.[GPS Antenna] Displays the connection status of the GPS antenna ([OK] or [NOK]) and the reception sensitivity.NOTEIf reception is poor, change the installation position of the GPS antenna.[Positioning Status] Displays the positioning status (3D positioning, 2D positioning, or no positioning), the number of satellites used for positioning (orange), and the number of satellites that have received signals (yellow). If signals from more than three satellites are received, the current location can be measured.[Installation] Indicates whether the installation position of this product is correct or not. If installed correctly, [OK] appears. When this product is installed at an extreme angle exceeding the limitation of the installing angle, [NOK(Inst. Angle)] is displayed. If the installation of this product is continually changed and it is not firmly fixed into place, [NOK(Vibration)] is displayed.[Speed Pulse] The speed pulse value detected by this product is shown.[Illumination] Displays the status of headlights or small lamps of the vehicle.[Back Signal] When the shift lever is shifted to “R” (reverse position), the signal switches to [High] or [Low]. The signal displayed varies depending on the vehicle.Menu Item Description CAUTIONDo not turn off the engine while importing an image from the external storage device.The menu items vary according to the source.[iDataLink] Displays the status of the optional iDatalink adapter.Menu Item Description[OEM Settings] (page 48).Menu Item Description[OEM Volume Settings] (page 48). Theme settings[OEM Settings][OEM Volume Settings]Menu Item Description[Background][Home] [AV]Select the wall paper from the preset items in this product or original pictures via the external device such as USB storage device and SD memory card.TIPThe wall paper can be set from selections for the top menu screen and AV operation screen.Preset Display Selects the desired preset background display. (custom)* Displays the background display image imported from the external storage device. To set the image from an external device, touch then select the desired image by touching the desired external storage device after connecting the device.NOTEBackground display image must be used within the following formats. •JPEG image files (.jpg or .jpeg)•Allowable data size is 10 MB or smaller•Allowable image size is 4 000 pixels × 4 000 pixels or smaller (off) Hides the background display.Menu Item Description](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-53.png)
![54 En* The external storage device is inserted or plugged in in advance to customize the image (page 26).You can export settings you have made on the [Theme] screen to an external storage device. Also, you can import them from an external storage device. CAUTIONDo not turn off the engine while exporting or importing the settings.[Illumination] Select an illumination color from the color list or create a defined color.Colored Keys Select the desired preset color. (custom) Displays the screen to customize the illumination color.To customize the defined color, touch then touch or to adjust the brightness and the level of red, green and blue to create favorite color.To store the customized color in the memory, touch and hold [Memo], and the customized color will be available at the next illumination setting by touching .TIPYou can also adjust the color tone by dragging the color bar. (rainbow) Shifts gradually between the preset colors in sequence.[Theme] Select the theme color.TIPYou can preview the top menu screen or the AV operation screen by touching [Home] or [AV] respectively.[Clock] Select the style of the clock from the preset image.Preset Images Select the desired preset style for the clock. (off) Hides the clock display.[Splash Screen] Select the splash screen from the preinstalled image in this product or external devices such as USB storage devices and SD memory cards.Preset Images Selects the desired preset splash screen image. (custom)* Displays the splash screen image imported from the external storage device.To set the image from an external device, touch then select the desired image by touching the desired external storage device after connecting the device.Replicating the settings Menu Item Description NOTES•If multiple external storage devices that include available data are connected to this product, the order of priority for the targets that the Theme settings are exported to or imported from is as follows: SD memory card USB storage device (USB port 1) USB storage device (USB port 2) •This setting is available only when you stop your vehicle in a safe place and apply the parking brake.▶Exporting Theme settings1Set the external storage device (page 26).2Press .3Touch then .4Touch [Export].5Touch the item you want export.[Illumination] [Theme] [Splash Screen] [Select All]6Touch [Export].▶Importing Theme settings1Set the external storage device (page 26).A message confirming whether to import the stored setting data appears.2Touch [Import]. Audio settingsThe menu items vary according to the source. Some of the menu items become unavailable when the volume is set to mute or the source is off.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-54.png)
![55EnEnglishMenu Item Description[Graphic EQ][Super Bass] [Powerful] [Natural] [Vocal] [Flat] [Custom1] [Custom2]Select or customize the equalizer curve.Select a curve that you want to use as the basis of customizing then touch the frequency that you want to adjust.TIPS•If you touch [Custom1] or [Custom2], the equalizer curve currently stored in [Custom1] or [Custom2] is recalled.•If the equalizer curve stored in [Custom1] or [Custom2] is modified, each stored curve will be overwritten.•If you trail your finger across the bars of multiple equalizer bands, the equalizer curve settings will be set to the value of the touched point on each bar.•If the preset equalizer curve other than [Custom1] or [Custom2] is modified, the curve setting will be overwritten in [Custom1].[Fader/Balance] Touch or to adjust the front/rear speaker balance. Set [Front] and [Rear] to [0] when using a dual speaker system.Touch or to adjust the left/right speaker balance.TIPYou can also set the value by dragging the point on the displayed table.NOTEOnly the balance can be adjusted when [Network Mode] is selected as the speaker mode.[Mute Level] Select mute or attenuate the AV source volume and iPhone or smartphone application volume when the navigation outputs the guidance voice.[ATT] The volume becomes 20 dB lower than the current volume.[Mute] The volume becomes 0.[Off] The volume does not change.[Source Level Adjuster][-4] to [+4]Adjust the volume level of each source to prevent radical changes in volume when switching between sources other than FM.Touch or to adjust the source volume after comparing the FM tuner volume level with the level of the source.TIPIf you directly touch the area where the cursor can be moved, the SLA (source level adjustment) setting will be changed to the value of the touched point.NOTES•Settings are based on the FM tuner volume level, which remains unchanged.•This function is not available when the FM tuner is selected as the AV source.[Subwoofer][On] [Off]Select enable or disable rear subwoofer output from this product.NOTEIf [Off] is selected, the subwoofer adjustment is not available in [Speaker Level], [Time Alignment] and [Crossover]. [Speaker Level]Listening position*1*2[Off] [Front Left] [Front Right] [Front] [All]Standard Mode*3[Front Left] [Front Right] [Rear Left] [Rear Right] [Subwoofer]Network Mode*3[High Left] [High Right] [Mid Left] [Mid Right] [Subwoofer]Speaker output level[-24] to [10]Adjust the speaker output level of the listening position.1Touch or to select the listening position then select the output speaker.2Touch or to adjust the selected speaker output level.[Crossover] Select a speaker unit (filter) to adjust the HPF or LPF cutoff frequency and the slope for each speaker unit (page 58).[Subwoofer Settings] Select the subwoofer phase (page 58).[Listening Position]*1[Off] [Front Left] [Front Right] [Front] [All]Select a listening position that you want to make as the center of sound effects.Menu Item Description](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-55.png)
![56 En[Time Alignment][On] [Off]Listening position*1*2[Off] [Front Left] [Front Right] [Front] [All]Standard Mode*3*4[Front Left] [Front Right] [Rear Left] [Rear Right] [Subwoofer]Network Mode*3*4[High Left] [High Right] [Mid Left] [Mid Right] [Subwoofer]Distance[0] to [140]Select or customize the time alignment settings to reflect the distance between the listener’s position and each speaker. You need to measure the distance between the head of the listener and each speaker unit.1Touch or to select the listening position then select the alignment speaker.2Touch or to input the distance between the selected speaker and listening position.TIPIf you touch [TA On], the time alignment is turned off mandatorily.NOTEThis function is available only when the listening position setting is set to [Front Left] or [Front Right].[Auto EQ][On] [Off]Set the auto-adjusted equalizer to suit the vehicle’s acoustics. To use this function, the Auto EQ measurement must be done in advance (page 57).[A-EQ&TA Measurement] Measures and adjusts the vehicles acoustics, equalizer, and time alignment automatically to suit the vehicle interior (page 57).[Save Settings] Save to recall the following current sound settings by touching [OK]: bass boost, slope, subwoofer phase, speaker level, Graphic EQ, HPF/LPF, listening position, crossover, time alignment.TIPWhen you touch [Cancel], return to the [Audio] setting screen.[Load Settings] Load the sound settings.NOTES•[Sound Setting] is available only when you have already saved the sound settings (page 56).•[Auto EQ&TA Setting] is available only when you have already performed Auto EQ measurement (page 56).[ASL] Set to one of five levels to increase the volume level of the audio depending on the driving speed and road conditions.[BASS Boost][0] to [6]Adjust the bass boost level.Menu Item Description*1 [All] is not available when [Network Mode] is selected as the speaker mode.*2 If you change the listening position setting, the output levels of all the speakers will change in conjunction with the setting.*3 To use this function, the vehicle’s acoustics must be measured in advance.*4 This function is available only when the [Listening Position] setting is set to [Front Left] or [Front Right].By measuring the vehicle’s acoustics, the equalizer curve can be adjusted automatically to suit the vehicle interior. WARNINGA loud tone (noise) may be emitted from the speakers when measuring the vehicle’s acoustics. Never perform Auto EQ measurement while driving. CAUTION•Thoroughly check the conditions before performing Auto EQ as the speakers may be damaged if this is performed under the following conditions:[Rear Speaker Output][Rear] [Subwoofer]Select the rear speaker output.NOTES•This function is available when [Standard Mode] is selected as the speaker mode.•If [Subwoofer] is selected, the rear speaker adjustment is not available in [Speaker Level], [Time Alignment] and [Crossover].[Loudness][Off] [Low] [Mid] [High]Compensates for deficiencies in the low-frequency and high-frequency ranges at low volume.[Automatic Level Control] Corrects automatically the audio level difference between the music files or the sources.[Off] Turns the auto level control setting off.[Mode1] Corrects a little the audio level difference between the music files or the sources (for the narrow dynamic range audio signal).[Mode2] Corrects widely the audio level difference between the music files or the sources (for the wide dynamic range audio signal).[Sound Retriever][Off] [Mode1] [Mode2]Enhances compressed audio and restores rich sound automatically.TIP[Mode2] has a stronger effect than [Mode1].Adjusting the equalizer curve automatically (Auto EQ)Menu Item Description](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-56.png)
![57EnEnglish– When the speakers are incorrectly connected. (For example, when a rear speaker is connected as a subwoofer output.)– When a speaker is connected to a power amp delivering output higher than the speaker’s maximum input power capability.•If a microphone for acoustical measurement (sold separately) is not placed in the appropriate location, the measurement tone may become loud and measurement may take a long time, resulting in battery drainage. Be sure to place the microphone in the specified location.▶Before operating the Auto EQ function•Perform Auto EQ in a quiet place with the vehicle engine and air conditioning switched off. Also, cut the power of car phones or cellular phones in the vehicle, or remove them in advance. Surrounding sounds may prevent correct measurement of the vehicle’s acoustics.•Be sure to use the microphone for acoustical measurement (sold separately). Using other microphones may prevent measurement, or result in incorrect measurement of the vehicle’s acoustics.•To perform Auto EQ, the front speakers must be connected.•When this product is connected to a power amp with input level control, Auto EQ may be impossible if the power amp’s input level is set below the standard level.•When this product is connected to a power amp with an LPF (low pass filter), turn the LPF off before performing Auto EQ. Also, set the cutoff frequency for the built-in LPF of an active subwoofer to the highest frequency.•The distance has been calculated by a computer to provide optimum delay to ensure accurate results. Do not change this value.– The reflected sound within the vehicle is strong and delay occurs.– The LPF on active subwoofers or external amps delay the lower sounds.•If an error occurs during measurement, check the following before measuring the vehicle’s acoustics.– Front speakers (left/right)– Rear speakers (left/right)– Noise– Microphone for acoustical measurement (sold separately)– Low battery▶Performing Auto EQ CAUTIONDo not turn off the engine while the measurement is in progress.NOTES•Auto EQ changes the audio settings as follows:– The fader/balance settings return to the center position (page 55).•Previous settings for Auto EQ will be overwritten.1Stop the vehicle in a quiet place, close all doors, windows, and sun roof, and then turn the engine off.If the engine is left running, engine noise may prevent correct Auto EQ.NOTEIf driving restrictions are detected during measurement, the measurement is canceled.2Fix the microphone for acoustical measurement (sold separately) in the center of the headrest of the driver’s seat, facing forward.The Auto EQ may differ depending on where you place the microphone. If desired, place the microphone on the front passenger seat and perform Auto EQ.3Disconnect the iPhone or smartphone device.4Turn on the ignition switch (ACC ON).If the vehicle’s air conditioner or heater is turned on, turn it off.5Switch the AV source to [Source OFF] (page 19).6Press .7Touch then .8Touch [A-EQ&TA Measurement].9Connect the microphone for acoustical measurement (sold separately) with this product.Plug the microphone into the Auto EQ microphone input jack on this product (page 7).NOTEUse an extension cable (sold separately) if the cord of the microphone (sold separately) is not long enough.10Touch [Front Left] or [Front Right] to select the current listening position.11Touch [Start].A 10-second countdown starts.NOTEThe Bluetooth connection is disconnected before the process starts.12Exit the vehicle and keep the doors closed until the countdown finishes.When the countdown finishes, a measurement tone (noise) is emitted from the speakers and Auto EQ measurement begins.13Wait until the measurement is completed.When Auto EQ is completed, a message is displayed.NOTEThe measurement time varies depending on the type of vehicle.TIPTo stop the measurement, touch [Stop].14Store the microphone carefully in the glove compartment or another safe place.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-57.png)
![58 EnIf the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change, or malfunction.You can adjust the cutoff frequency value of each speaker.The following speakers can be adjusted: [Standard Mode]: Front, Rear, Subwoofer. [Network Mode]: High, Mid, Subwoofer.NOTES•Subwoofer settings are available only when [Subwoofer] is [On].•Rear speaker settings are available only when [Rear Speaker Output] is [Rear].1Press .2Touch then .3Touch [Crossover] or [Subwoofer Settings].4Touch or to switch the speaker.5Drag the graph line to set the cutoff position.6Drag the lowest point of the graph to set the cutoff slope.The following items can also be set.Switches the subwoofer phase between normal and reverse position.LPF/HPF Switches the LPF/HPF setting to [On] or [Off]. When it is turned off, the high-pass filter or low-pass filter of each speaker can also be turned on by touching the graph lines. Video settingsThe menu items vary according to the source.This setting is available only when [Disc] is selected as the source. Adjusting the cutoff frequency value[DVD/DivX Setup]Menu Item Description[Subtitle Language]*1*2 Set a subtitle language preference. When you select [Others], a language code input screen is shown. Input the four-digit code of the desired language then touch . [Audio Language]*1*2 Set an audio language preference. When you select [Others], a language code input screen is shown. Input the four-digit code of the desired language then touch . [Menu Language]*1*2 Set a menu language preference. When you select [Others], a language code input screen is shown. Input the four-digit code of the desired language then touch . [Multi Angle][On] [Off]Set to display the angle icon on the screen.[TV Aspect] Set the aspect ratio suitable for your rear display 16:9 (wide screen display) or 4:3 (regular display). (We recommend use of this function only when you want to fit the aspect ratio to the rear display.)NOTES•When playing discs that do not have a panscan system, the disc is played back with [Letter Box] even if you select the [Pan Scan] setting. Confirm whether the disc package bears the mark. •The TV aspect ratio cannot be changed for some discs. For details, refer to the disc's instructions.[16:9] Displays the wide screen image (16:9) as it is (initial setting).[Letter Box] Makes the image in the shape of a letterbox with black bands on the top and bottom of the screen.[Pan Scan] Cuts the image short on the right and left sides of the screen.Menu Item Description](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-58.png)
![59EnEnglish[Parental] Set restrictions so that children cannot watch violent or adult-oriented scenes. You can set the parental lock level in steps as desired.1Touch [0] to [9] to input a four-digit code number.2Touch .Registers the code number, and you can now set the level.3Touch any number between [1] to [8] to select the desired level.The lower the level is set, the tighter the restriction is applied.4Touch .Sets the parental lock level. NOTES•We recommend keeping a record of your code number in case you forget it.•The parental lock level is recorded on the disc. You can confirm it by looking at the disc package, the included booklet, or the disc itself. You cannot use parental lock with discs that do not feature a recorded parental lock level.•With some discs, parental lock operates to skip certain scenes only, after which normal playback resumes. For details, refer to the disc's instructions.•When you set a parental lock level and then play a disc featuring parental lock, code number input indications may be displayed. In this case, playback will begin when the correct code number is input. [DivX® VOD] Displays this product's registration and deregistration code to register this product with your DivX VOD content provider to play DivX® VOD (video on demand) content on this product.TIPYou can do this by generating a DivX VOD registration code, which you submit to your provider. [Registration Code] is 10-digit. [Deregistration Code] is 8-digit.NOTEMake a note of the code as you will need it when you register or deregister from a DivX VOD provider.Menu Item Description*1 You can switch the language by touching the switch languages key during playback.*2 The setting made here will not be affected even if the language is switched during playback using the appropriate key.Menu Item Description[Time Per Photo Slide][5sec] [10sec] [15sec] [Manual]Select the interval of image file slideshows on this product.Menu Item Description[AV][Auto] [PAL] [NTSC] [PAL-M] [PAL-N] [SECAM]Select the suitable video signal setting when you connect this product to an AV equipment.[AUX][Auto] [PAL] [NTSC] [PAL-M] [PAL-N] [SECAM]Select the suitable video signal setting when you connect this product to an AUX equipment.[Camera][Auto] [PAL] [NTSC] [PAL-M] [PAL-N] [SECAM]Select the suitable video signal setting when you connect this product to a rear view camera.[DVD Auto Play][On] [Off]Set to display the DVD menu automatically and start playback from the first chapter of the first title when a DVD disc with a DVD menu is inserted.NOTESome DVDs may not operate properly. If this function is not fully operable, turn this function off and start playback.[Time Per Photo Slide][Video Signal Setting]Menu Item Description](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-59.png)
![Favorite menu60 EnRegistering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the [Favorites] screen.NOTEUp to 12 menu items can be registered in the favorite menu.Creating a shortcut1Press then touch .2Touch the star icon of the menu item.The star icon for the selected menu is filled in.TIPTo cancel the registration, touch the star icon in the menu column again.Selecting a shortcut1Press then touch .2Touch .3Touch the menu item.Removing a shortcut1Press then touch .2Touch .3Touch and hold the favorite menu column.The selected menu item is removed from the [Favorites] screen.TIPYou can also remove a shortcut by touching and holding the registered menu column.Other functionsSetting the time and date1Touch the current time on the screen.2Touch or to set the correct time and date.You can operate the following items: Year, month, date, hour, minute.TIPS•You can change the time display format to [12hour] or [24hour].•You can change the order of date display format: Day-month, Month-day.Changing the wide screen modeYou can set the screen mode for AV screen and image files.1Touch the screen display mode key.Screen display mode key2Touch the desired mode.[Full] A 4:3 picture is enlarged in the horizontal direction only, enabling you to enjoy an image without any omissions.[Zoom] A 4:3 picture is enlarged in the same proportion both vertically and horizontally.[Normal] A 4:3 picture is displayed normally, without changing its proportion.](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-60.png)
![61EnEnglishTIPS•Different settings can be stored for each video source.•When a video is viewed in wide screen mode that does not match its original aspect ratio, it may appear different.•The video image will appear coarser when viewed in [Zoom] mode.NOTES•Image files can be set to either [Normal] or [Trimming] in wide screen mode.•This setting is available only when you stop your vehicle in a safe place and apply the parking brake.Selecting the video for the rear displayYou can choose either to show the same image as the front screen or to show the selected source on the rear display.NOTES•Video files on the external storage device are not available as a source for the rear display when [Apple CarPlay] is activated.•Video files on the external storage device are not available as a source for the rear display when [Android Auto] is activated in [Smartphone Setup].1Press then touch .2Touch [Rear].3Touch the source you want to show on the rear display.[Mirror] The video on the front screen of this product is output to the rear display.Not all videos or sounds can be output to the rear display.[DVD/CD] The video and sound of a disc are output to the rear display.Compatible video types are DVD-V, Video-CD, DivX, MPEG-1, MPEG-2, and MPEG-4 only.[USB1] The video and sound of the USB storage device is output to the rear display.•The port that supports the rear display will only be USB port 1.•Compatible file types are MPEG-4, H.264, WMV, MKV, and FLV only.[SD] The video and sound of the SD memory cards are output to the rear display.Compatible file types are MPEG-4, H.264, WMV, MKV, and FLV only.[AV] The video and/or sound of the AV input source are output to the rear display.The video image and sound are output only when [AV Input] is set to [Source] (page 44).[Source OFF] Nothing is output to the rear display.Setting the anti-theft function[Trimming] An image is displayed across the entire screen with the horizontal-to-vertical ratio left as is. If the screen ratio differs from the image, the image may be displayed partly cut off either at the top/bottom or sides.NOTE[Trimming] is for image files only.NOTENOTENOTESYou can set a password for this product. If the back-up lead is cut after the password is set, this product prompts for the password at the time of next boot up. ImportantIf you forgot your password, contact the nearest authorized Pioneer Service Station.1Press .2Touch then .3Touch 1, followed by 2, and then touch 3.4Touch [Set Password].5Enter the password.5 to 16 characters can be entered for a password.6Touch [Go].7Enter a password hint.NOTENOTESetting the password](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-61.png)
![62 EnUp to 40 characters can be entered for a hint.8Touch [Go].If you want to change the password currently set, enter the current password and then enter the new one.9Check the password, and then touch [OK].The current password and password hint can be deleted.1Press .2Touch then .3Touch 1, followed by 2, and then touch 3 (page 61).4Touch [Clear Password].5Touch [Yes].6Touch [OK].7Enter the current password.8Touch [Go].A message indicating that the security setting is canceled appears.Restoring this product to the default settingsYou can restore settings or recorded content to the default settings from [Restore Settings] in the [System] menu (page 50).AppendixTroubleshootingDeleting the password If you have problems operating this product, refer to this section. The most common problems are listed below, along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorized Pioneer service facility.A black screen is displayed, and operation is not possible using the touch panel keys.→[Power OFF] mode is on.– Press any button on this product to release the mode.– Press and hold the RESET button to release the rear view camera screen and then change the camera polarity setting to [Battery].CD or DVD playback is not possible.→The disc is inserted upside down.– Insert the disc with the label upward.→The disc is dirty.– Clean the disc.→The disc is cracked or otherwise damaged.– Insert a normal, round disc.→The files on the disc are in an irregular file format.– Check the file format.→The disc format cannot be played back.– Replace the disc.→The loaded disc is a type this product cannot play.– Check what type of disc it is.The screen is covered by a caution message and the video cannot be shown.→The parking brake lead is not connected or the parking brake is not applied.– Connect the parking brake lead correctly, and apply the parking brake.→The parking brake interlock is activated.– Park your vehicle in a safe place and apply the parking brake.No video output from the connected equipment.→The [AV Input] or [AUX Input] setting is incorrect.– Correct the settings.The audio or video skips.→This product is not firmly secured.– Secure this product firmly.No sounds are produced. The volume level will not rise.→Cables are not connected correctly.– Connect the cables correctly.→The system is performing still, slow motion, or frame-by-frame playback with DVD-Video.– There is no sound during still, slow motion, or frame-by-frame playback with DVD-Video.→The system is paused or performing fast reverse or forward during the disc playback.– For the media other than music CD (CD-DA), there is no sound on fast reverse or forward.Common problemsProblems with the AV screen](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-62.png)
![63EnEnglishThe icon is displayed, and operation is impossible.→The operation is not compatible with the video configuration.– The operation is not possible. (For example, the DVD playing does not feature that angle, audio system, subtitle language, etc.)The picture stops (pauses) and this product cannot be operated.→The reading of data is impossible during disc playback.– Stop playback once, then restart.The picture is stretched, with an incorrect aspect ratio.→The aspect setting is incorrect for the display.– Select the appropriate setting for that image.A parental lock message is displayed and DVD playback is not possible.→The parental lock is on.– Turn the parental lock off or change the level.The parental lock for DVD playback cannot be canceled.→The code number is incorrect.– Input the correct code number.The DVD video is not played back with the audio/subtitle language specified in [DVD/DivX Setup]. →The DVD does not support the language selected in [DVD/DivX Setup].– Playback in the selected language is not possible if the language selected in [DVD/DivX Setup] is not recorded on the disc. The picture is extremely unclear/distorted and dark during playback.→The disc features a signal to prohibit copying. (Some discs may have this.)– Since this product is compatible with the copy guard analog copy protect system, the picture may suffer from horizontal stripes or other imperfections when a disc with that kind of protection signal is viewed on some displays. This is not a malfunction.iPod cannot be operated.→The iPod is frozen.– Reconnect the iPod with the USB interface cable for iPod/iPhone.– Update the iPod software version.→An error has occurred.– Reconnect the iPod with the USB interface cable for iPod/iPhone.– Park your vehicle in a safe place, and then turn off the ignition switch (ACC OFF). Subsequently, turn the ignition switch to on (ACC ON) again.– Update the iPod software version.→Cables are not connected correctly.– Connect the cables correctly.Sound from the iPod cannot be heard.→The audio output direction may switch automatically when the Bluetooth and USB connections are used at the same time.– Use the iPod to change the audio output direction.Dialing is impossible because the touch panel keys for dialing are inactive.→Your phone is out of range for service.– Retry after re-entering the range for service.→The connection between the cellular phone and this product cannot be established.– Perform the connection process.Problems with the phone screenA black screen is displayed.→While operating an application, the application was ended on the smartphone side.– Press to display the top menu screen.→The smartphone OS may be awaiting screen operation.– Stop the vehicle in a safe place and check the screen on the smartphone.The screen is displayed, but operation does not work at all.→An error has occurred.– Park your vehicle in a safe place, and then turn off the ignition switch (ACC OFF). Subsequently, turn the ignition switch to on (ACC ON) again.– When an Android device is connected, disconnect the Bluetooth connection from this product and then reconnect it.The smartphone was not charged.→Charging stopped because the temperature of the smartphone rose due to prolonged use of the smartphone during charging.– Disconnect the smartphone from the cable, and wait until the smartphone cools down.→More battery power was consumed than was gained from charging.– This problem may be resolved by stopping any unnecessary services on the smartphone.The status of the vehicle for the forward and backward directions are reversed.→Since part of the vehicle status is sent to the connected device when you use the Android Auto function, this problem occurs when the reverse gear polarity setting of this product is incorrect.– Check the polarity and re-select the correct setting.Error messagesWhen problems occur with this product, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, record the error message and contact your dealer or your nearest Pioneer service center.AMP Error→This product fails to operate or the speaker connection is incorrect; the protective circuit is activated.– Check the speaker connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or an authorized Pioneer Service Station for assistance.TEMP→The temperature of this product is outside the normal operating range.– Wait until this product returns to a temperature within the normal operating limits.Product overheat. System will be shut down automatically in 1 minute. Restart the product by ACC-Off/On may fix this problem. If this message keeps showing up, it is possible that some problem occured in the product.→The temperature is too high for this product to operate.– Follow the instructions displayed on the screen. If this does not solve the Problems with Application screenCommon](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-63.png)
![64 Enproblem, contact your dealer or an authorized Pioneer Station for assistance.Error-19(Communication error occurred.)→Communication failed.– Disconnect the cable from the iPod. Once the iPod’s main menu is displayed, reconnect the iPod and reset it.Our content licenses limit the number of tracks you may skip.→Skip limit reached.– Do not exceed the skip limit.– Pandora limits the total number of skips per hour.Please sign in to your Pandora account→You are not logged in to the Pandora application.– Please log in to the Pandora application.Check USB→The USB connector or USB cable has short-circuited.– Check that the USB connector or USB cable is not caught in something or damaged.→The connected USB storage device consumes more than maximum allowable current.– Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect a compliant USB storage device.Poor network connection. Listening will resume when it’s restored.→The Pandora application is accessed/relocated from outside the licensing region.– Access Pandora from within the licensing region.Incompatible USB→The connected USB storage device is not supported by this product.– Disconnect your device and replace it with a compatible USB storage device.Check Antenna→The antenna connection is incorrect.– Check the antenna connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or the nearest authorized Pioneer service center for assistance.Check Tuner→The SiriusXM Connect Vehicle Tuner connection is incorrect.– Check the tuner connection and battery voltage. If the message fails to disappear even after the engine is switched off/on, contact your dealer or the nearest authorized Pioneer service center for assistance.No Signal→The SiriusXM Connect Vehicle Tuner is having difficulty receiving the SiriusXM satellite signal.– Verify that your vehicle is outdoors with a clear view of the southern sky.– Verify that the SiriusXM magnetic mount antenna is mounted on a metal surface on the outside of the vehicle.– Move the SiriusXM antenna away from any obstructions.No Content→TuneScan™ is not available.– Perform the operation with another preset channel.PandoraSiriusXM® Satellite RadioChannel Not Available→The channel that you have requested is not a valid SiriusXM channel.– Visit www.siriusxm.com for more information about the SiriusXM channel lineup.Subscription Updated Press Enter to Continue→This product has detected a change in your SiriusXM subscription status.– Touch [Enter] to clear the message. In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if you have questions about your subscription. In Canada, visit www.siriusxm.ca or call 1-877-438-9677 if you have questions about your subscription. Channel Not Subscribed. Call SiriusXM to Subscribe.→The channel that you have requested is not included in your SiriusXM subscription package.– Check the content of your SiriusXM subscription package. In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if you have questions about your subscription package or would like to subscribe to this channel. In Canada, visit www.siriusxm.ca or call 1-877-438-9677. Channel Locked Please Enter the Lock Code→Locked by the radio Parental Control feature.– Release the channel lock.Artist Unavailable→The alert memo function is not available.– Perform the operation with another channel.Song Unavailable→The alert memo function is not available.– Perform the operation with another channel.Team Unavailable→The alert memo function is not available.– Perform the operation with another channel.Alert Memory Full You can manage alert memory in the alert list→The memory is full.– Clear the alert list.Memory Full→The memory has become full while playback was paused.– Resume playback.Memory Nearly Full→The memory has become nearly full while playback was paused.– Resume playback.No qualified TuneMix music channels in this band.→There are no qualified TuneMix channels in this band.– Requires two or more qualified music channels to be stored as presets in the current band.Error-02-XX/FF-FF→The disc is dirty.– Clean the disc.→The disc is scratched.– Replace the disc.→The disc is loaded upside down.– Check that the disc is loaded correctly.→There is an electrical or mechanical error.Disc](https://usermanual.wiki/Pioneer/K103.04-Short-Term-Confidential-User-Manual-2/User-Guide-3707174-Page-64.png)
