Pioneer K089 DVD AV RECEIVER User Manual
Pioneer Corporation DVD AV RECEIVER
UserManual.wiki
>
Pioneer
>
K089 User Manual
User manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![502EnglishSectionEnBefore you startAbout this unit CAUTION• Do not allow this unit to come into contact with liquids. Electrical shock could result. Also, damage to this unit, smoke, and overheating could result from contact with liquids.• Keep this manual handy for future reference.• Always keep the volume low enough to hear outside sounds.• Avoid exposure to moisture.• If the battery is disconnected or discharged, any preset memory will be erased. NoteFunction setting operations are completed even if the menu is cancelled before the operations are conrmed. In case of troubleShould this product fail to operate properly, please contact your dealer or nearest authorized Pioneer Service Station. Resetting the microprocessorThe microprocessor must be reset in the following situations:• Before using this unit for the first time after installation• If the unit fails to operate properly• When strange or incorrect messages appear on the display1 Press the (page 6, ) button on the top right of the front panel to ip down it.2 Press [RESET] with a pen tip or other pointed instrument. Disable the demonstration modeThe demonstration mode should be turned off as in the following process.- Press the SRC key to turn on this unit.- Press and hold the SEL key to display Setting menu.- Select General menu and then choose Demo.- Select Off and then press the center of Multi Control to set the Demo mode off.- Press the ESC key to deselect the Setting menu.The demonstration mode is also disabled automatically by turning ignition key on and off.RESET](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-5.png)
![603SectionEnOperating this unitPart Operation• Panel openMUTE• Mute on/off• Enter the source menu (2 sec.)• Return to main source menu (2 sec.), use [ ] (Left) / [ ] (Right) button on the front panel or [ ] / [ ] button on the remote control to select the desired mode, and press [M.C.] button on the front panel or [ENTER] button on the remote control to conrm.SRC• Power off (2 sec.)• Select playing mode: • Radio • Disc (when disc inserted) • USB storage device/iPod/iPhone (when USB storage device/iPod/iPhone connected) • AUX-IN (front audio & video input. External peripheral devices with RCA audio and video outputs can be connected with the unit.) • AV Input (rear audio & video input. External peripheral devices with RCA audio and video outputs can be connected with the unit.) • BT • APPPress the [ ] button to ip down the front panel.](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-6.png)
![703EnglishSectionEnOperating this unitPart Operation Part Operation BSM • Preset scan (in Radio mode)• Best Stations Memory (2 sec.) (in Radio mode)• Stop playback• Reject the incoming call or hang up the current conversationBAND• Play/Pause (in DVD, CD and MP3/WMA modes)• Band switch (in Radio mode) (Left)• Search the previous station automatically (press more than 2 seconds) (in Radio mode).• Search the previous station manually (in Radio mode).• Search the previous track or chapter (in CD, MP3/WMA, and DVD video mode).• Fast backward by 2, 4, 8, 16 step (2 sec.) (in CD, MP3/WMA and DVD video mode).• Navigate left among option itemsMULTI-CONTROL (M.C.)• Adjust volume level (rotate).• Conrm operation (press).• Stop auto seeking (in Radio mode) (press). (Down)• Navigate down among option items (in DVD, CD and MP3/WMA modes)• Play the previous preset radio station (in Radio mode) (Right)• Search the next station automatically (press more than 2 seconds) (in Radio mode).• Search the next station manually (in Radio mode).• Search the next track or chapter (in CD, MP3/WMA, and DVD video mode).• Fast forward by 2, 4, 8, 16 step (2 sec.) (in CD, MP3/WMA and DVD video mode).• Navigate right among option itemsESC• Cancel source select menu and return to previous menu• When play back videos, press to show information.• Display off (press 2 sec.) Press any button to resume.Music displayOn BT main menu, press the [ESC] buttonto display the music interface, press [ESC]again to return the BT main menu.• Remote sensor• AV in AUX input jack (3.5mm stereo/video jack) Use to connect an auxiliary device.• USB port (Up)• Navigate up among option items (in DVD, CD and MP3/WMA modes)• Play the next preset radio station (in Radio mode)SEL• Audio/video Setting (press).• Setting menu (press 2 sec.).• 3.5 inch TFT display• USB port• Disc loading slot• Eject buttonRESET • RESETCAUTION • Use an optional Pioneer USB cable (CD-U50E) to connect the USB audio player/USB memory as any device connected directly to the unit will protrude out from the unit and may be dangerous.• Connect an optional iPod/iPhone (30-pin connector) to the unit by iPod/iPhone cable (CD-IU51). Connect the USB port to the USB connector on the front of the panel• Connect an optional iPod/iPhone (Lightning connector) to the unit by iPod/iPhone cable (CD-IU52). Connect the USB port to the USB connector on the front of the panel• Do not use unauthorized products.](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-7.png)
![903EnglishSectionEnBasic operations Important• Handle gently when removing or attaching the front panel.• Avoid subjecting the front panel to excessive shock.• Keep the front panel out of direct sunlight and high temperatures.• To avoid damaging the device or vehicle interior, remove any cables and devices attached to the front panel before detaching it.Removing the front panel to protect your unit from theft1 Press the (page 6, ) button to flip down the front panel.12 Grab the left side of the front panel, push it to the right, then pull it out.2* The indicator light ashes after the panel removed.3 Always keep the detached front panel in a protection device such as a protection case.Re-attaching the front panel1 Grab the left side of the front panel, push it to the right, then push it in until it clicks.1 Make sure that the front panel has been properly connected to the main unit.2 Press the upper left end of the front panel until it is rmly seated.2• If you can’t attach the front panel to the main unit successfully, try again. Forcing the front panel into place may result in damage.Turning the unit on Press [SRC] button to turn the unit on.Turning the unit off Press and hold [SRC] until the unit turns off.Selecting a source Press [SRC] to cycle between: Radio (tuner)—Disc (when disc inserted)—USB storage device/iPod/iPhone (when USB storage device/iPod/iPhone connected)—AUX (AUX-IN cannot carry out a source selection, unless it turns ON AUX by Setting menu.)—AV Input (AV-IN cannot carry out a source selection, unless it turns ON AV Input by Setting menu. )—BT (Bluetooth)—APP Adjusting the volume Turn [M.C.] to adjust the volume. Turn counterclockwise to decrease and clockwise to increase the volume.Operating this unit](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-9.png)
![1003SectionEnUse and care of the remote controlUsing the remote control Point the remote control in the direction of the front panel to operate.When using for the rst time, pull out thelm protruding from the tray.Replacing the batterySlide the tray on the back of the remote control out and insert the battery with the plus (+) and minus (–) poles aligned properly.• When using for the rst time, pull out the lm protruding from the tray.CR2025(3V) WARNING• Keep the battery out of the reach of children. Should the battery be swallowed, consult a doctor immediately.• Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, re or the like. CAUTION• Remove the battery if the remote control is not used for a month or longer.• There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.• Do not handle the battery with metallic tools.• Do not store the battery with metallic objects.• If the battery leaks, wipe the remote control completely clean and install a new battery.• When disposing of used batteries, comply with governmental regulations or environmental public institutions’ rules that apply in your country/area. Important• Do not store the remote control in high temperatures or direct sunlight.• The remote control may not function properly in direct sunlight.• Do not let the remote control fall onto the oor, where it may become jammed under the brake or accelerator pedal.Basic menu operationsSource (selecting a source)1 Press and hold [SRC] button to display the home menu.2 Use [ ] (Left) / [ ] (Right) button on the front panel or [ ] / [ ] button on the remote control to select the desired source. Press [M.C.] button on the front panel or [ENTER] button on the remote control to select.List (operating a list menu) Press [ESC] to display the list menu (in MP3/WMA/CD-DA mode) (page 12).Audio/Video (setting an audio menu)Press [SEL] to display the audio/Video menu.Refer to Audio Adjustments (page 20).System (setting a system menu)Press and hold [SEL] more than 2 seconds to display the system menu.Refer to System settings (page 19).Operating this unit](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-10.png)
![1103EnglishSectionEnRadioRadio menuRadioPOWERFULSource indicatorTime BandPreset station NumberSound effect indicator FrequencyBand selectingPress [ BAND ] button repeatedly to select desired band. The band indicator (FM1, FM2, FM3 or AM) will be displayed.Manual tuning (step by step)Press the [ ] (Left) or [ ] (Right) button to tune step by step. Seeking1 Press and hold the [ ] (Left) or [ ] (Right) button more than 2 seconds to seek previous/next available station.2 You can cancel seek tuning by press [M.C.] or [ ] (Left) / [ ] (Right) button.Storing and recalling stationsYou can easily store up to six stations for each band as presets.Storing a preset station manually1 Tune to a desired station as above method. 2 Press and hold [M.C.] button until the preset station flashes on the screen, press [ ] (Up) or [ ] (Down) button to select a preset number, then press [M.C.] button to store it. You may also do the operation by the remote control as following step: Press and hold a number button (1-6) on the remote control, the current station will be stored in the memory.Storing a preset station automaticallyBSM (best stations memory) automatically stores the 6 strongest stations of each band, the unit can store 24 stations in total.Best stations memory1 Press and hold [ BSM] button more than 2 seconds to search and store stations. During searching and storing, "BSM" appears on the display. 2 The unit will scan play the preset stations automatically and "STATION" appears on the display.• To cancel, press [ BSM] button again.Recalling preset stationsPress [ BSM] button to scan play all the preset stations.LOC/DX (local / distant seek tuning)Local seek tuning lets you tune to only those radio stations with sufciently strong signals for good reception.Distant seek tuning allows to receive all the signals.1 Press and hold the [SEL] button to display the setting mode.2 Press [ ] (Left) / [ ] (Right) button on the front panel or [ ] / [ ] button on the remote control to select Radio setting menu.3 Rotate the [M.C.] or press [ ] (Down) button on the front panel or [ ] button on the remote control to move the cursor to LOC DX option.4 Press [M.C.] or [ENTER] button to spread the sub-menu.5 Rotate the [M.C.] or press [ ] (Up) / [ ] (Down) button on the front panel or [ ] / [ ] button on the remote control to select desired option.6 Press [M.C.] or [ENTER] button to conrm.Operating this unit](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-11.png)
![1203SectionEnOperating this unitUSB playback Playing les on a USB storage device1 Open the USB port cover.2 Plug in the USB storage device using a USB cable.3 The unit will switch to USB mode and load the files in the USB device automatically.Stopping playback of les on a USB storage device• Switch to other mode.• Disconnect the USB storage device.List menuThe unit will enter list menu after connecting the USB storage, it will enter playing audio files automatically after 15 seconds, press [ESC] button to return to list menu. Source indicatorCurrent track number/Total track numberTimePlayback status indicatorAudio list indicatorPhoto list indicatorVideo list indicatorFile listSelecting le categoryThe unit will enter le list after loading the storage, press [ ] (Left) button on the front panel or [ ] button on the remote control to return to le type selecting. Press [ ] (Up) / [ ] (Down) button on the front panel or [ ] / [ ] button on the remote control to select file category (Audio, Photo, Video), press [M.C.] or [ENTER] to conrm.Selecting a folder1 Press [ ] (Up) / [ ] (Down) or [ ] / [ ] button to select a folder (if there are folders in the storage), press [M.C.] or [ENTER] to conrm. 2 To nd a sub-folder, repeat above step.Selecting a le (chapter)In le list menu, press [ ] (Up) / [ ] (Down) or [ ] / [ ] button to select a le, press [M.C.] or [ENTER] button, the unit will load the le and start playback. Selecting a le of other folder:1. If there are more than 1 folder in the storage, a folder icon appears upon the le’s names, press [ ] (Up) / [ ] (Down) or [ ] / [ ] button to select it and press [M.C.] or [ENTER] button to show all the folders.2. Press [ ] (Up) / [ ] (Down) or [ ] / [ ] button to select a folder and press [M.C.] or [ENTER] button to show the files in the folder.Playing audio lesPOWERFULTrack informationRepeat and Random informationSound effect indicatorElapsed time/Total time of the track• In playback menu, press [ESC] button to return to upper category.Play/PausePress [ BAND] button on the front panel or [ ] button on the remote control to play/pause.](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-12.png)
![1303EnglishSectionEnOperating this unitPrevious/next track Press [ ] (Left) or [ ] (Right) button to go to previous or next track.Fast forwarding or reversingPress and hold [ ] (Left) or [ ] (Right) button more than 2 seconds to fast backward/forward by 2, 4, 8, 16 step.Back to list menuPress [ESC] button to back to list menu.Playing photo lesPlay/PausePress [ BAND] or [ ] button to play/pause.Previous/next photo Press [ ] (Left) or [ ] (Right) button to go to previous or next photo.Rotating photo Press [ ] button to rotate the photo 270° -> 180° -> 90°, press [ ] button to rotate the photo 90° -> 180° -> 270°, each press to rotate the photo 90°, press [ ] (Up) / [ ] (Down) or [ ] / [ ] button to rotate the photo 180°.Back to list menuPress [ BSM] button to back to list menu.Playing video lesPlay/PausePress [ BAND] or [ ] button to play/pause.Previous/next chapterPress [ ] (Left) or [ ] (Right) button to go to previous or next chapter.Fast forwarding or reversing Press and hold [ ] (Left) or [ ] (Right) button more than 2 seconds to fast backward/forward by 2, 4, 8, 16 step.Back to list menuPress [ BSM] button to back to list menu.Notes• Disconnect USB storage devices from the unit when not in use.• It will take several minutes when playing external storage devices that contain a mixture of various media le types.• Use an optional Pioneer USB cable (CD-U50E) to connect the USB audio player/USB memory as any device connected directly to the unit will protrude out from the unit and may be dangerous.• Do not use unauthorized products.Playing DivX® VOD contentSome DivX® VOD (video on demand) content may only be playable a fixed number of times.When you attempt to play back this type ofcontent saved on an external storage device, the remaining number of times it can be played is shown on-screen. You can then decide whether or not to play back the contents of the external storage device.• If there is no limit to the number of times the DivX® VOD content can be viewed, then you may insert the external storage device into your player and play the content as often as you like, and no message will be displayed.• You can conrm the number of times that the content can be played by checking the number displayed after Remaining Views. Important• In order to play DivX® VOD contents on this unit, you first need to register the unit with your DivX® VOD contents provider. For details on your registration code, refer to Displaying the DivX® VOD registration code .• DivX® VOD content is protected by a DRM (Digital Rights Management) system. This restricts playback of content to specic, registered devices.If a message is displayed after inserting the external storage device containing DivX® VOD content, use M.C. to select a desired mode.Turn to change the mode. Press to select.• Play – Playback of the DivX® VOD content• Next Play – Skip to the next le• Stop – If you do not want to play the DivX® VOD content](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-13.png)
![1403SectionEnDisc playbackInsert a disc1 Press (page 6, ) button to ip down the panel. 2 Insert a disc into the disc loading slot (page 6, ).3 Close the panel, and the unit will change to disc mode automatically. Notes• Please confirm whether there is a disc in the unit before you insert another one.• The unit will exit current playing source and enter DVD mode when one disc is inserted.• The following format disc will be support: CD-R,CD-RW, DVD-R, DVD+R, DVD-RW,DVD + RW .Eject the disc1 Press (page 6, ) button to ip down the panel.2 Press [ ] button (page 6, ) to eject the disc. 3 Close the panel.Notes• After ejecting the disc, the unit reverts to other mode automatically.• You can eject a disc when the unit powered off. The unit remains off after the disc ejected.• If the disc is not removed from the unit within 10 seconds, the disc will be reloaded to prevent accidental damage.Disc playback1 When a disc is inserted, display shows "Loading". For MP3/WMA or disc with mixed files, reading time may exceed 1 minute.2 While audio/photo/video files playback, list menu will appear on the display. The list menu and operations are the same with USB playback (page 12).Stop playback temporarily- During playback, press [ BAND] or [ ] to pause playback.- The sound will be muted.- Display shows "PAUSE". Press [ BAND ] or [ ] again to continue playback. To resume normal play, repeat the operation.Stop playback entirely1 During playback, press [ BSM] button once to stop the playback and the relevant location on the disc is saved, press [ BAND] or [ ] to resume the playback from the saved disc location.2 Press [ BSM] twice to cease the playback. Press [ BAND] or [ ] to start the playback from the very beginning the Title page of the DVD or the rst track of VCD / CD.Select desired track- Press [ ] (Left) or [ ] (Right) button to skip to the previous/next track.Fast forward/backward during playbackPress [ ] (Left) or [ ] (Right) button for more than 2 seconds repeatedly to select X2, X4, X8, X16 to fast backward or forward track during playback.- During the fast forward or backward operation, press [ BAND] or [ ] briey to playback again. - During the fast forward or backward operation, the volume will be muted.Random track playback (for CD/VCD/MP3/WMA Only)You can play all the tracks in random order.1 During playback, press [RDM] button on the remote control unit to select random playback. 2 Press [RDM] button again to select normal playback.RepeatDuring playback, press [RPT] button on the remote control unit to select repeat playback.Repeat A - BSelect desired passage to repeat playback.- Press [A->B] on the remote control once to select starting point.- Press [A->B] again to select ending point, selected passage start to replay.- Press [A->B] once again to exit. Operating this unit](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-14.png)
![1503EnglishSectionEnGOTOGoto desired title/chapter or time point directly of video.1 Press [ G ] (GOTO) button on the remote control, search menu display on top of the screen. 2 Use [ ] (Up) / [ ] (Down) button on the front panel or [ ] / [ ] button on the remote control to select Title, Chapter or Time, if necessary. The options of the search menu depends on the video type, it maybe display only one or two of the options.3 Use [ ] or [ ] button to select desired title/chapter or input the number by digit buttons. 4 Press [M.C.] or [ENTER] button to conrm.PBC - Playback control ( for VCD 2.0 or up)1 If you insert a VCD with PBC, press [ MENU/PBC ] button to set the PBC On/Off.2 When PBC is set to Off, playback starts from the beginning of the 1st track automatically. 3 When PBC is set to On, the PBC menu will be displayed, use navigation buttons or digit buttons to select desired track, press [M.C.] or [ENTER] button to confirm the playback, then the PBC will be set to Off automatically.DVD audio selectPress [AUDIO/MUSIC] button to select audio language to listen if the DVD has multiple audio languages.VCD audio selectPress [AUDIO/MUSIC] button to select audio channel to listen (L, R, Stereo).DVD subtitle selectPress [SUBTITLE/PHOTO] button to select the subtitle language to show if the DVD has multiple language subtitles.DVD title select Press [TITLE] button to display title or chapter list, use [ ] (Up) / [ ] (Down) button on the front panel or [ ] / [ ] / [ ] / [ ] button on the remote control or digit number to select, press [M.C.] or [ENTER] button to play. DVD angle selectPress [ANGLE/VIDEO] button to select different angle to view if the DVD has multiple-angle views.ZoomPress [ZOOM] button, the picture will be zoomed accordingly.Operating this unit](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-15.png)
![1603SectionEnOperating this unitBluetooth Operation The Bluetooth allows you to utilize your car’s built-in audio system for wireless mobile phone or music handsfree communication. Some Bluetooth mobile phones have the audio features, and some portable audio players support Bluetooth feature. This system can play audio data stored in a Bluetooth audio device. The car stereo with Bluetooth will be able to retrieve phonebook contacts, received call, dialled call, missed call, incoming calls, outgoing call and listen to music.Notes• Do not leave the microphone of Bluetooth handsfree in the places with wind passing such as air outlet of the air conditioner, etc. This may cause a malfunction.• If leave it in the places subjected to direct sun, high temperature can cause distortion, discoloration which may result in a malfunction.• This system will not operate or may operate improperly with some Bluetooth audio players.• The unit cannot guarantee the compatibility of all mobile phones together with the unit.Pairing1 Switch the Bluetooth on in the system setting menu. (see page 20 <System setup> <Bluetooth>)2 Turn on Bluetooth function of your mobile phone.3 Enter mobile phone’s Bluetooth setup menu.4 Search for new Bluetooth devices.5 Select DVH-885AVBT from the pairing list on the mobile phone, and paired automatically.6 After pairing successfully, the unit will show "HFP: Connected", "A2DP: Connected". If the connection doesn't establish after pairing, Use [ ] (Up) / [ ] (Down) button on the front panel or [ ] / [ ] button on the remote control to select HFP or A2DP, then press and hold [M.C.] button to connect it manually.Notes• The unit only pair one mobile phone, and only memry the last pair device. When power on, only search the last pair device.• All HFP function sources can connect; A2DP function only can connect the BT source and APP source, enter other source will disconnect automatically, and switch BT source again will paired automatically.Main menuPress the [SRC] button to switch the source to "BT". "BLUETOOTH" must be ON to access to the BT source.Menu ListGalaxy S5Source indicatorDevice nameTimeStatus indicatorHFP/A2DP statustransmit/arrive InformationIndication messageMusic displayOn BT main menu, press the [ESC] button to display the music interface, press [ESC] again to return the BT main menu.Note• The display information only includ: Char Title、Char Artist、Char Album、Total time、Play time.Making a callPress the [SRC] button to switch the source to "BT". Input numbers by remote control then press [M.C.] button on the front panel or [ENTER] button on the remote control to dial out.Answering a callYou can answer an incoming call by pressing the [M.C.] or [ENTER] button.* Press [ BSM] button on the front panel or [ ] button on the remote control to hang up the current conversation or reject an incoming call.](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-16.png)
![1703EnglishSectionEnOperating this unitTransfer the callPress [ BAND] button on the front panel or [ ] button on the remote control to switch the HFP voice between unit and HFP device.NoteSome cellular phones may not be able to transfer the Phone Book data.Call from PhonebookPress and hold [ BSM] button on the front panel or [ ] button on the remote control will toggle between BT main menu and phone book menu when BT device is connected, if BT is not connected, the menu could not be switched to phone book menu.Galaxy S5Phone book listUse [ ] (Up) / [ ] (Down) button on the front panel or [ ] / [ ] button on the remote control to select from: 1 Missed Calls 2 Received Calls 3 Dialed Calls 4 Phone BookPress [M.C.] button on the front panel or [ENTER] button on the remote control to loading the data, then the numbers list on the display. Use [ ] (Up) / [ ] (Down) button on the front panel or [ ] / [ ] button on the remote control to select a number, press [M.C.] button on the front panel or [ENTER] button on the remote control to dial out.Audio Streaming OperationsWhat is audio streaming?Audio streaming is a technique for transferring audio data such that it can be processed as a steady and continuous stream. Users can stream music from their external audio player to their car stereo wirelessly and listen to the tracks through the car’s speakers. Please consult your nearest dealer for more information on the product of wireless audio streaming transmitter offered.CAUTIONPlease avoid operating your connected mobile phone while audio streaming as this may cause noise or sound choppy on the song playback.Audio streaming may or may not resume after telephone interrupt as this is dependent on mobile phone.System will always return to Radio mode if audio streaming is disconnected.NoteBe sure to read the chapter "Pairing" before proceeding.Play / Pause a track1. Press the [ BAND] button to pause audio playback.2. To resume audio playback, press the [ BAND] button again.Selecting a trackTrack-up1. Press the [ ] (Right) button on the front panel or [ ] button on the remote to move to the beginning of the next track.2. Each time the [ ] (Right) or [ ] button is pressed, playback proceeds to another track in the advancing direction.Track-down1. Press the [ ] (Left) on the front panel or [ ] button on the remote to move the to beginning of the previous track.2. Each time the [ ] (Left) or [ ] button is pressed, playback proceeds to previous track in the reverse direction.NotePlaying order will depend on Bluetooth audio player. When [ ] (Left) or [ ] button is pressed, some A2DP devices will restart the current track depends on the duration of playback.](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-17.png)
![1803SectionEnOperating this unitAPP Operation Starting procedure for Android device users Connect your Android device to this unit using Bluetooth wireless technology.To use the CarMediaPlayer with the compatible Pioneer product, AppRadio app should be installed.AppRadio app can be downloaded from Google Play.Main menu1 Press the [SRC] button to switch the source to "APP". "BLUETOOTH" must be ON to access to the BT source.2 Select [CarMediaPlayer] to enter. POWERFULSource indicatorTime Track informationSound effect indicatorElapsed time/Total time of the trackPlay/PausePlay/PausePress [ BAND] button on the front panel to play/pause.Select desired trackPress [ ] (Left) or [ ] (Right) button to skip to the previous/next track.Fast forward/backward during playbackPress [ ] (Left) or [ ] (Right) button for more than 2 seconds to fast backward or forward track during playback.- During the fast forward or backward operation, undo the button to playback again. Information for compatibility of connected devicesThe following is the detailed information regarding the terminals required to use the application for smartphone on this unit.For smartphone users• The device has Android OS 2.3 or later.• The device supports Bluetooth SPP (Serial Port Prole) and A2DP (Advanced Audio Distribution Prole). The device is connected to this unit via Bluetooth.• Compatibility with all Android devices is not guaranteed.Notes• Pioneer is not liable for any issues that may arise from incorrect or flawed app-based content.• The content and functionality of the supported applications are the responsibility of the App providers.](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-18.png)
![1903EnglishSectionEnOperating this unitFast forward/backwardPress the [ ] (Left) / [ ] (Right) button on the front panel for more than 2 seconds to fast backward or forward track during playback.- During the fast forward or backward operation, press [ BAND] or [ ] briey to playback normally again. - During the fast forward or backward operation, the volume will be muted. Control an iPod/iPhone from its unit (Control iPod mode)- Press and hold [ BAND] to switch to the Control iPod mode.- Press and hold [ BSM] to cancel the mode.- The following operations cannot be performed from the unit, when the control iPod mode is activated. - Play, pause, stop, fast forward/backward- The volume/mute function can only be performed from the unit.NoteThe iPod or iPhone couldn't be charged through the unit after the unit turned off.iPod/iPhone PlaybackConnect an optional iPod or iPhone to the unit by iPod/iPhone cable. Connect the USB port to the USB connector on the front of the panel.When connecting a device, the unit will read the les automatically. The track information display on the screen once playback start.Main MenuPress the [SRC] button to switch the source to "iPod".No TitleNo ArtistNo AlbumALLPOWERFUL546789Source indicatorTrack numberTimePlayback status indicatorPlayback informationEQ indicatorPlayback statusElapsed time/Total time9Control iPod mode indicatorStop playback temporarily- During playback, press [ BAND] or [ ] button to pause playback.- The sound will be muted.- Press [ BAND] or [ ] again to continue playback. Select desired track/chapter- Press [ ] (Left) / [ ] (Right) or [ ] / [ ] button to skip to the previous/next track/chapter.](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-19.png)
![2003SectionEnOperating this unitSystem setupIn all mode, press and hold [SEL] to enter system setting menu. The unit could not enter the setting menu when the system is busy, such as loading disc or USB.1 Press [ ] (Left) / [ ] (Right) or [ ] / [ ] button to select category.2 Rotate [M.C.] or press [ ] (Up) / [ ] (Down) or [ ] / [ ] button to select a number, press [M.C.] or [ENTER] button to select options, then press the [M.C.] or [ENTER] button to spread the sub-menu. 3 Rotate the [M.C.] or press [ ] (Up) / [ ] (Down) or [ ] / [ ] button to highlight the desired selection, press [M.C.] or [ENTER] to conrm. • Pressing [ ] will return to upper catalog.Setting menuSettingTimeCategoryOptionsSub-menuGeneralBeep: Turn on or off the beep sound.Time Mode: Select 12 Hour or 24 Hour Mode.Time Adjust:Press [ ] (Right) or [ ] button to switch between hour and minute, rotate the [M.C.] or press [ ] (Up) / [ ] (Down) or [ ] / [ ] button to adjust.DivX® Deactivation:Display the DivX® activation information.In order to play DivX® VOD (video on demand) contents on this unit, the unit must rst be registered with a DivX® VOD contents provider.DivX® Registration:To show the DivX® registration code and web site. Parental control:1 When "Enter password" appears on the display, input a 4-digit password by remote control (Original password: 8888), press [M.C.] or [ENTER] button to confirm and "Correct Password" appears.2 Press [M.C.] or [ENTER] , then rotate [M.C.] or press [ ] (Up) / [ ] (Down) or [ ] / [ ] button to select a rating level. The rating is from 1 to 8: (1) with the most limits when playing. (8) with the least limits when playing.3 Press the [M.C.] or [ENTER] button to conrm.Set Password:1 When "Enter password" appears on the display, input the old password by remote control, press [M.C.] or [ENTER] button to conrm and "Correct Password" appears.2 Press the [M.C.] or [ENTER], enter a new 4-digit password by the remote control, press the [M.C.] or [ENTER] button to conrm. 3 Then input the new password again for double confirm, press the [M.C.] or [ENTER] button and "Set Password Successful" appears.• Original password: 8888• If you forget your password, enter original password to unlock.Default Settings:Load the default settings.When the selection menu appears, press [ ] (Left) / [ ] (Right) or [ ] / [ ] button to select Yes or No, press [M.C.] or [ENTER] button to conrm.Color Key:Select the key backlight color Blue or Red.](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-20.png)
![2203SectionEnOperating this unitAudio SettingAudio SettingPOWERFUL+6 +4Press the [SEL] button to enter audio setting menu. First press shows current EQ. Press [ ] (Up) / [ ] (Down) button on the front panel or [ ] / [ ] button on the remote control to changes EQ in this order:POWERFUL -> NATURAL -> VOCAL-> CUSTOM -> FLAT->SUPERBASSTo set user denition, press [SEL] button or [ ] (Left) / [ ] (Right) button on the front panel or [ ] / [ ] button on the remote control to select it including: BAS(bass)/MID(middle)/TRE(treble)/BAL(balance)/FAD(fader), press [ ] / [ ] button on the remote control to adjust value.Video settingVideo SettingBRI CON SATAt Audio setting menu, press [ ] (Left) / [ ] (Right) or [ ] / [ ] button repeatedly until Video Setting menu displayed.Press [ ] (Left) / [ ] (Right) or [ ] / [ ] button to select it including: BRI/CON/SAT, press [ ] (Up) / [ ] (Down) or [ ] / [ ] button to adjust value.* Rear monitor is not adjustable.NoteVideo setting is adjustable for this product display only, it is not adjustable when video output to the other devices display.Other FunctionUsing an AUX sourceA separately sold auxiliary device such as a VCR or portable device can be connected to this unit. When connecting auxiliary device using thefront AUX input.• You need to activate the AUX function in the initial setting menu. Refer to previous page.• A portable audio/video player can be connected by using a 3.5mm plug (4 pole) with an RCA cable (sold separately). However, depending on the cable, a reverse connection between the red (right side audio) cable and yellow (video) cable may be required in order for the sound and video image to be reproduced correctly.Using an AV sourceWhen connecting auxiliary device using the rear AV input.• You need to activate the AV function in the initial setting menu. Refer to previous page.• A portable audio/video player can be connected by using a standard plug with an RCA cable (sold separately). However, depending on the cable, a reverse connection between the red/white (right/left side audio) cable and yellow (video) cable may be required in order for the sound and video image to be reproduced correctly.](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-22.png)
![29AppendixEnglishEn05Additional informationTroubleshooting CommonSymptom Cause ActionThe power will not turn on. The unit will not operate.Leads and connectors are incorrectly connected.Conrm once more that all connections are correct.The fuse is blown.Rectify the cause and then replace the fuse. Be sure to install a fuse with the same rating.Noise and/or other factors are causing the built-in microprocessor to operate incorrectly.Press [RESET].The power isn’t enabled correctly. Press [SRC] button to turn on the unit.Operation with the remote control is not possible. The unit does not operate correctly even when the appropriate remote control buttons are pressed.Battery power is low. Load a new battery.There is no sound. The volume level will not rise.Cables are notconnected correctly.Connect the cablescorrectly.There is no sound. Mute is On at the time of the source of "AV/AUX." Press [MUTE].Demo mode always starts.System setting returns to initial state.Wiring of "ACC+" and "Battery" are reversed each other.Please conrm wiring of "Battery" and "ACC+".Refer to "Wiring diagram" (page 24)The aspect ratio is incorrect and the image is stretched.The aspect ratio setting is incorrect for the display.Select the appropriate setting for your display.There is noimage displayed.The parkingbrake cable isnot connected.Connect the parkingbrake cable, and apply the parkingbrake.The image displayed stops (pauses) and the unit cannot be operated.The data could no longer be read during playback.Stop playback once, and start playback again.There is no sound. The volume level is low. The volume level is low. Adjust the volume level.The sound and video skip.The unit is not rmly secured. Firmly secure the unit.Sub-folders cannot be played back.Folder repeat play has been selected. Select the repeat range again.The repeat range changes automatically.Another folder was selected during repeat play.Select the repeat range again.Track search or fast forward/reverse was performed during le repeat play.Select the repeat range again.](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-29.png)
![Appendix30 En05 Additional informationSymptom Cause ActionThe sound from the Bluetooth audio source is not played back.There is a call in progress on a Bluetooth connected cellular phone.The sound will be played back when the call is terminated.A Bluetooth connected cellular phone is currently being operated.Do not operate the cellular phone at this time.A call was made with a Bluetooth connected cellular phone and then immediately terminated. As a result, communication between this unit and the cellular phone was not terminated properly.Reconnect the Bluetooth connection between this unit and the cellular phone.Error messagesWhen you contact your dealer or your nearestPioneer Service Center, be sure to note the error message.Message Cause ActionLoading Disc or storage device is being read.Please wait, it may take several minutes for some disc or storage device.No DiscDisc is dirty. Clean disc with soft cloth.Disc is upside down. Insert disc with label side up.Disc not present in loading compartment. Insert disc.Error DiscDisc is dirty. Clean disc with soft cloth.Disc is upside down. Insert disc with label side up.Disc format is not compatible with this unit. Change another disc.Video resolution not supportedThe video resolution exceeds 720X576. Change to a supported le.Not supported Disc or storage device format is not compatible with this unit.Change to a supported Disc or storage device.Wrong region DVD is not compatible with region code of unit.Use discs with corresponding regional code.Error Illegal mechanism operation. Press [ ] button for 5 seconds to reset loading mechanism.AMP ErrorUnit fails to operate or speaker connection is incorrect; protective circuit is activated.Check the speaker connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or an authorized Pioneer Service Station for assistance.Check USB The USB over rated current. Check the USB device or change the USB device.](https://usermanual.wiki/Pioneer/K089/User-Guide-2623253-Page-30.png)
