Pioneer K016 CD Receiver User Manual 2 of 2

Pioneer Corporation CD Receiver 2 of 2

Contents

User Manual 2 of 2

Operation ManualCD RECEIVERDEH-P7000BTEnglish
Thank you for buying this Pioneer product.Please read through these operating instructions so you will know how to operateyour model properly. After you have finished reading the instructions, keep this man-ual in a safe place for future reference.Before You StartInformation to User 5For Canadian model 5About this unit 5After-sales service for Pioneer products 8Visit our website 8In case of trouble 8Protecting your unit from theft 8–Removing the front panel 8–Attaching the front panel 9Resetting the microprocessor 9Use and care of the remote control 9–Installing the battery 9–Using the remote control 10Operating this unitWhat’s What 11–Head unit 11–Remote control 12–Display indication 13Basic Operations 14–Power ON/OFF 14–Selecting a source 14–Adjusting the volume 14Tuner 15–Basic Operations 15–Storing and recalling broadcastfrequencies 15–Introduction to advancedoperations 15–Storing the strongest broadcastfrequencies 15–Tuning in strong signals 16Built-in CD Player 16–Basic Operations 16–Selecting a track directly 17–Displaying text information on disc 17–Selecting tracks from the track titlelist 18–Selecting files from the file namelist 18–Introduction to advancedoperations 18–Selecting a repeat play range 18–Playing tracks in random order 19–Scanning folders and tracks 19–Pausing playback 19–Using Sound Retriever 19–Using disc title functions 19Playing songs on USB portable audio player/USB memory 21–Basic Operations 21–Selecting an audio file directly in thecurrent folder 21–Selecting files from the file namelist 21–Displaying text information of an audiofile 21–Introduction to advancedoperations 21Playing songs on iPod 22–Basic Operations 22–Browsing for a song 22–Displaying text information oniPod 23–Introduction to advancedoperations 23–Playing songs in a random order(shuffle) 24–Playing all songs in a random order(shuffle all) 24–Selecting songs from album list ofcurrently playing artist 24–Operating this unit’s iPod functionfrom your iPod 24–Changing audiobook speed 25Bluetooth Audio 25–Connecting a Bluetooth audioplayer 25–Disconnecting a Bluetooth audioplayer 26–Basic Operations 27–Introduction to advancedoperations 27–Playing songs on a Bluetooth audioplayer 27ContentsEn2
–Stopping playback 27–Connecting to a Bluetooth audio playerautomatically 27–Displaying BD (Bluetooth Device)address 28Bluetooth Telephone 28–Setting up for hands-free phoning 28–Introduction of connection andregistration 29–Connecting and disconnecting acellular phone 29–Making a phone call 32–Taking a phone call 33–Using the phone number list 33–Using the call history 34–Using the phone book 34–Using preset numbers 36–Introduction to advancedoperations 37–Downloading phone books from yourcellular phone 38–Transferring entries to the phonebook 39–Setting the automatic connection 39–Setting automatic answering 39–Echo canceling and noisereduction 39–Switching the ring tone 40–Making a call by entering phonenumber 40–Clearing memory 40–Changing the phone book displayorder 40–Selecting menu language 41Audio AdjustmentsIntroduction of audio adjustments 42Using balance adjustment 42Using the equalizer 42–Recalling equalizer curves 42–Adjusting equalizer curves 43–Fine-adjusting equalizer curve 43Adjusting loudness 43Using subwoofer output 44–Adjusting subwoofer settings 44Using the high pass filter 44Boosting the bass 45Adjusting source levels 45Initial SettingsAdjusting initial settings 46Setting the date 46Setting the clock 46Switching the warning tone 46Switching the auxiliary setting 47Setting the rear output and subwoofercontroller 47Switching the sound muting/attenuation 47Setting the internal power amplifier 48Switching the ever scroll 48Activating the BT AUDIO source 48Entering PIN code for Bluetooth wirelessconnection 48Editing device name 49Displaying system version for repair 49Resetting the Bluetooth wireless technologymodule 49Updating the software about Bluetoothconnection 50Other FunctionsUsing the AUX source 51–About AUX1 and AUX2 51–AUX1 source: 51–AUX2 source: 51–Selecting AUX as the source 51–Setting the AUX title 51Using the external unit 51–Selecting the external unit as thesource 51–Basic operation 52–Advanced operations 52Turning the clock display on or off 52Switching the display indication and buttonillumination 52Using the PGM button 52En 3Contents
Available accessoriesPlaying songs on iPod 54–Basic operation 54–Displaying text information oniPod 54–Browsing for a song 54–Introduction to advancedoperations 54–Playing songs in a random order(shuffle) 55XM tuner 55–Listening to XM Satellite Radio 55–Selecting an XM channel directly 55–Switching the XM display 55–Storing and recalling broadcaststations 55–Switching the XM channel selectmode 56–Displaying the Radio ID 56SIRIUS Satellite Radio tuner 56–Listening to SIRIUS Satellite Radio 56–Selecting a SIRIUS channeldirectly 57–Switching the SIRIUS display 57–Storing and recalling broadcaststations 57–Introduction of advancedoperations 57–Selecting the SIRIUS channel selectmode 58–Using the Game Alert function 58–Displaying the Radio ID 59–Using Instant Replay function 59HD Radio tuner 60–Basic Operations 60–Storing and recalling broadcastfrequencies 60–Switching the display 60–Introduction to advancedoperations 61–Switching the seek mode 61–Switching the reception mode 61Multi-CD Player 61–Basic Operations 61–Using CD TEXT functions 62–Selecting a track directly 62–Introduction to advancedoperations 62–Using compression and bassemphasis 63–Using ITS playlists 63–Using disc title functions 64DVD Player 65–Basic Operations 65–Selecting a disc 65–Selecting a folder 65–Introduction to advancedoperations 65TV tuner 67–Basic Operations 67–Storing and recalling broadcaststations 67–Storing the strongest broadcaststations sequentially 68Additional InformationTroubleshooting 69Error messages 69Handling guideline of discs and player 71Dual Discs 71Compressed audio compatibility 71Compressed audio files on the disc 72–Example of a hierarchy 72USB audio player/USB memory 72–USB audio player/USB memorycompatibility 72–Handling guideline and supplementalinformation 73iPod 74–About handling the iPod 74–About iPod settings 74Bluetooth profiles 74Specifications 75ContentsEn4
Information to UserFCC ID: AJDK016MODEL NO.: DEH-P7000BTIC: 775E-K016This device complies with Part 15 of FCC Rulesand RSS-Gen of IC Rules. Operation is subjectto the following two conditions: (1) this devicemay not cause interference, and (2) this devicemust accept any interference, including inter-ference that may cause undesired operation ofthis device.MADE IN THAILANDThis equipment has been tested and found tocomply with the limits for a class B digital de-vice, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reason-able protection against harmful interference ina residential installation.This equipment generates, uses and can radi-ate radio frequency energy and, if not installedand used in accordance with the instructions,may cause harmful interference to radio com-munications. However, there is no guaranteethat interference will not occur in a particularinstallation.If this equipment dose cause harmful interfer-ence to radio or television reception, whichcan be determined by turning the equipmentoff and on, the user is encouraged to try to cor-rect the interference by one or more of the fol-lowing measures:!Reorient or relocate the receiving antenna.!Increase the separation between the equip-ment and receiver.!Connect the equipment into an outlet on acircuit different from that to which the re-ceiver is connected.!Consult the dealer or an experienced radio/TV technician for help.Alteration or modifications carried out withoutappropriate authorization may invalidate theuser’s right to operate the equipment.!This transmitter must not be co-located or op-erated in conjunction with any other antennaor transmitter.!This equipment complies with FCC/IC radia-tion exposure limits set forth for uncontrolledequipment and meets the FCC/IC radio fre-quency (RF) Exposure Guidelines in Supple-ment C to OET65 and RSS-102 of the IC radiofrequency (RF) exposure rules. This equipmenthas very low levels of RF energy that it isdeemed to comply without testing of specificabsorption ratio (SAR).For Canadian modelOperation is subject to the following two condi-tions:(1) This device may not cause harmful interfer-ence, and (2) this device must accept any inter-ference received, including interference thatmay cause undesired operation.This Class B digital apparatus complies withCanadian ICES-003.About this unitThe tuner frequencies on this unit are allo-cated for use in North America. Use in otherareas may result in poor reception.Before You StartEn 5Section01Before You Start
WARNINGHandling the cord on this product or cords asso-ciated with accessories sold with the productmay expose you to chemicals listed on proposi-tion 65 known to the State of California and othergovernmental entities to cause cancer and birthdefects or other reproductive harm. Wash handsafter handling.CAUTION:USE OF CONTROL OR ADJUSTMENT ORPERFORMANCE OF PROCEDURESOTHER THAN THOSE SPECIFIED HEREINMAY RESULT IN HAZARDOUS RADIATIONEXPOSURE.CAUTION:THE USE OF OPTICAL INSTRUMENTSWITH THIS PRODUCT WILL INCREASEEYE HAZARD.CAUTION!Do not allow this unit to come into contactwith liquids. Electrical shock could result.Also, damage to this unit, smoke, and over-heating could result from contact with liquids.!Keep this manual handy as a reference for op-erating procedures and precautions.!Always keep the volume low enough so thatyou can hear sounds from outside the vehicle.!Protect this unit from moisture.!If the battery is disconnected or discharged,the preset memory will be erased and must bereprogrammed.Important (Serial number)The serial number is located on the bottom ofthis unit. For your own security and convenience,be sure to record this number on the enclosedwarranty card.About WMAThe Windows Media™logo printed on the boxindicates that this unit can play back WMAdata.Windows Media and the Windows logo are tra-demarks or registered trademarks of MicrosoftCorporation in the United States and/or othercountries.!This unit may not operate correctly depend-ing on the application used to encodeWMA files.About MP3Supply of this product only conveys a licensefor private, non-commercial use and does notconvey a license nor imply any right to usethis product in any commercial (i.e. revenue-generating) real time broadcasting (terrestrial,satellite, cable and/or any other media), broad-casting/streaming via internet, intranets and/or other networks or in other electronic con-tent distribution systems, such as pay-audio oraudio-on-demand applications. An indepen-dent license for such use is required. For de-tails, please visithttp://www.mp3licensing.com.About AACThis unit plays back AAC files encoded byiTunes®.iTunes is a trademark of Apple Inc., registeredin the U.S. and other countries.Portable audio player compatibility!Inquire at the manufacturer about yourUSB portable audio player/USB memory.This unit corresponds to the following.—USB MSC (Mass Storage Class) compliantportable audio player and memory—WMA, MP3, AAC and WAV file playbackBefore You StartEn6Section01
For details about the compatibility, refer toUSB audio player/USB memory compatibilityon page 72.iPod®compatibilityThis unit can control and listen to songs on aniPod.!This unit supports only the following iPods.Supported iPod software versions areshown below. Older versions of iPod soft-ware may not be supported.—iPod nano first generation (software ver-sion 1.3.1)—iPod nano second generation (softwareversion 1.2.1)—iPod nano third generation (softwareversion 1.0.2)—iPod fifth generation (software version1.2.1)—iPod classic (software version 1.0.2)—iPod touch (software version 1.1.1)!Operations may vary depending on the soft-ware version of iPod.!When using an iPod, iPod Dock Connectorto USB Cable is required.!Pioneer CD-IU50 interface cable is alsoavailable. For details, consult your dealer.!This unit can control previous generationsiPod models with a Pioneer iPod adapter(e.g. CD-IB100N).For details concerning operation with theiPod adapter, refer to Playing songs on iPodon page 54.!iPod is a trademark of Apple Inc., regis-tered in the U.S. and other countries.About BluetoothBluetooth is a short-range wireless radio con-nectivity technology that is developed as acable replacement for mobile phones, hand-held PCs and other devices. Bluetooth oper-ates in 2.4 GHz frequency range and transmitsvoice and data at speeds up to 1 megabit persecond. Bluetooth was launched by a specialinterest group (SIG) that comprises of EricssonInc., Intel Corp., Nokia Corp., Toshiba and IBMin 1998, and it is currently developed by nearly2 000 companies worldwide.!The Bluetooth word mark and logos areowned by the Bluetooth SIG, Inc. and anyuse of such marks by Pioneer Corporationis under license. Other trademarks andtrade names are those of their respectiveowners.About the SAT RADIO READY markThe SAT RADIO READY mark indicates thatthe Satellite Radio Tuner for Pioneer (i.e., XMtuner and Sirius satellite tuner which are soldseparately) can be controlled by this unit.Please inquire to your dealer or nearestauthorized Pioneer service station regardingthe satellite radio tuner that can be connectedto this unit. For satellite radio tuner operation,please refer to the satellite radio tuner owner’smanual.!The system will use direct satellite-to-recei-ver broadcasting technology to provide lis-teners in their cars and at home withcrystal-clear sound seamlessly from coastto coast. Satellite radio will create andpackage over 100 channels of digital-qualitymusic, news, sports, talk and children’sprogramming.!“SAT Radio”, the SAT Radio logo and all re-lated marks are trademarks of Sirius Satel-lite Radio inc., and XM Satellite Radio Inc.About HD Radio!The HD Radio Ready logo is a proprietarytrademark of iBiquity Digital Corp.Before You StartEn 7Section01Before You Start
CAUTION!Pioneer accepts no responsibility for data loston the USB portable audio player/USB mem-ory even if that data is lost while using thisunit.!Pioneer accepts no responsibility for data loston the iPod even if that data is lost whileusing this unit.After-sales service forPioneer productsPlease contact the dealer or distributor fromwhere you purchased this unit for after-salesservice (including warranty conditions) or anyother information. In case the necessary infor-mation is not available, please contact thecompanies listed below:Please do not ship your unit to the companiesat the addresses listed below for repair withoutadvance contact.U.S.A.Pioneer Electronics (USA) Inc.CUSTOMER SUPPORT DIVISIONP.O. Box 1760Long Beach, CA 90801-1760800-421-1404CANADAPioneer Electronics of Canada, Inc.CUSTOMER SATISFACTION DEPARTMENT300 Allstate ParkwayMarkham, Ontario L3R 0P21-877-283-5901905-479-4411For warranty information please see the Lim-ited Warranty sheet included with this unit.Visit our websiteVisit us at the following site:http://www.pioneerelectronics.com1 Register your product. We will keep the detailsof your purchase on file to help you refer tothis information in the event of an insuranceclaim such as loss or theft.2 Receive updates on the latest products andtechnologies.3 Download owner’s manuals, order productcatalogues, research new products, andmuch more.In case of troubleShould this product fail to operate properly,contact your dealer or nearest authorizedPioneer Service Station.Protecting your unit fromtheftThe front panel can be detached to deter theft.!If the front panel is not detached from thehead unit within five seconds of turning offthe ignition, a warning tone sounds.!You can turn off the warning tone. SeeSwitching the warning tone on page 46.Important!Handle gently when removing or attachingthe front panel.!Avoid subjecting the front panel to excessiveshock.!Keep the front panel out of direct sunlight andhigh temperatures.Removing the front panel1 Press OPEN to open the front panel.2 Grip the left side of the front panel andpull it gently outward.Take care not to grip it too tightly or to dropthe front panel and protect it from contactwith water or other fluids to prevent perma-nent damage.Before You StartEn8Section01
3 Put the front panel into the providedprotective case for safe keeping.Attaching the front panel%Reattach the front panel by holding itupright to the unit and clipping it securelyinto the mounting hooks.Resetting the microprocessorThe microprocessor must be reset under thefollowing conditions:!Prior to using this unit for the first timeafter installation!If the unit fails to operate properly!When strange or incorrect messages ap-pear on the display%Press RESET with a pen tip or otherpointed instrument.RESET buttonUse and care of the remotecontrolInstalling the batterySlide the tray on the back of the remote con-trol out and insert the battery with the plus (+)and minus (–) poles aligned properly.!When using for the first time, pull out thefilm protruding from the tray.WARNINGKeep the battery out of the reach of children.Should the battery be swallowed, consult a doc-tor immediately.CAUTION!Use one CR2025 (3 V) lithium battery.!Remove the battery if the remote control is notused for a month or longer.!There is a danger of explosion if the battery isincorrectly replaced. Replace only with thesame or equivalent type.!Do not handle the battery with metallic tools.!Do not store the battery with metallic objects.Before You StartEn 9Section01Before You Start
!If the battery leaks, wipe the remote controlcompletely clean and install a new battery.!When disposing of used batteries, complywith governmental regulations or environmen-tal public institutions’rules that apply in yourcountry/area.!“Perchlorate Material –special handling mayapply.See www.dtsc.ca.gov/hazardouswaste/perchlorate. (Applicable to California, U.S.A.)”Using the remote controlPoint the remote control in the direction of thefront panel to operate.!The remote control may not function prop-erly in direct sunlight.Important!Do not store the remote control in high tem-peratures or direct sunlight.!Do not let the remote control fall onto thefloor, where it may become jammed under thebrake or accelerator pedal.Before You StartEn10Section01
What’s WhatHead unit1SRC/OFF buttonThis unit is turned on by selecting a source.Press to cycle through all the availablesources.2DISP/SCROLL buttonPress to select different displays.3OPEN buttonPress to open the front panel.4LIST buttonPress to display the disc title list, track titlelist, folder list, file list, preset channel list orphone number list depending on thesource.5S.Rtrv/SAT MODE buttonPress to switch Sound Retriever settings.When XM tuner or SIRIUS tuner is selectedas the source, press to change the channelselect mode.When SIRIUS tuner is selected as thesource, press and hold to perform the In-stant Replay mode.6RDM/ /iPod buttonPress to turn random function on or offwhile using CD or USB.While using an iPod, press to shuffle alltracks.Press and hold to switch the control modewhile using an iPod.If using the iPod with an interface adapter(CD-IB100N), press to switch the shufflefunction.7CLOCK/DISP OFF buttonPress to change to the clock display.Press and hold to turn the display indicationand button illumination off or on.8indicatorLights up when your Bluetooth audio playeris connected via Bluetooth wireless technol-ogy.!While connecting, this indicator flashes.9indicatorLights up when your cellular phone is con-nected via Bluetooth wireless technology.!While connecting, this indicator flashes.!While phone connection is not com-pleted, this indicator flashes.111222333444555666777aaacccbbb888999dddeeecccfffggghhhiiijjjooolllllnnnnnkkkmmm111Operating this unitEn 11Section02Operating this unit
aMUTE/HOLD buttonPress to turn off the sound. To turn on thesound, press again.While talking on the phone, press to put thecall on hold.bMULTI-CONTROLMove to perform manual seek tuning, fastforward, reverse and track search controls.Also used for controlling functions.Turn to increase or decrease the volume.cBAND/ESC buttonPress to select among three FM bands andone AM band.Press to return to the ordinary display whenoperating the menu.dPHONE/ /CONNECT buttonPress to select the phone as the source.While operating a phone source, press toend a call, reject an incoming call or cancelmaking a call.Press and hold to perform Bluetooth con-nection.Remote controlOperation is the same as when using the but-tons on the head unit.eVOLUME buttonsPress to increase or decrease the volume.fFUNCTION buttonPress to select functions.gThumb padMove to perform manual seek tuning, fastforward, reverse and track search controls.Also used for controlling functions.Functions are the same asMULTI-CONTROL except for volume con-trol.hDIRECT buttonPress to directly select the desired track.iCLEAR buttonPress to cancel the input number when 0to9are used.j0 to 9 buttonsPress to directly select the desired track,preset tuning or disc. Buttons 1to 6can op-erate the preset tuning for the tuner or discnumber search for the multi-CD player.k(off hook) buttonPress to start talking on the phone while op-erating a phone source.l(on hook) buttonWhile operating the phone source, press toend a call or reject an incoming call.m(mute) buttonPress to turn off the sound. To turn on thesound, press again.nPGM buttonPress to operate the preprogrammed func-tions for each source. (Refer to Using thePGM button on page 52.)oAUDIO buttonPress to select an audio function.1a bcde f g h i j23 4 5 6 78 9Operating this unitEn12Section02
Display indication1Main display sectionDisplays band, frequency, elapsed playbacktime and other settings.!TunerBand and frequency are displayed.!Bulit-in CD player, USB, iPodElapsed playback time and literal infor-mation are displayed.2LOC indicatorAppears when local seek tuning is on.35(stereo) indicatorAppears when the selected frequency isbeing broadcast in stereo.4(shuffle) indicatorAppears when shuffle function is on whileiPod source is being selected.5F-RPT indicatorAppears when folder repeat is on.When repeat function is on, only RPT is dis-played.6F-RDM indicatorAppears when folder random is on.When random function is on, only RDM isdisplayed.7(received call) indicatorAppears when received call list is displayedwhile telephone source is being selected.8(dialled call) indicatorAppears when dialled call list is displayedwhile telephone source is being selected.9(auto answer) indicatorShows when the automatic answering func-tion is on (for more details, refer to Settingautomatic answering on page 39).a(folder) indicatorAppears when operating list function.When an upper tier folder or menu exists, cappears.When a lower tier folder or menu exists, dappears.b(artist) indicatorAppears when the disc (track) artist name isdisplayed on the main display section.Appears when artist search refinement onthe iPod browsing function is in use.c(disc) indicatorAppears when the disc (album) name is dis-played on the main display section.Appears when album search refinement onthe iPod browsing function is in use.d(song) indicatorAppears when the track (song) name is dis-played on the main display section.Appears when song search refinement onthe iPod browsing function is in use.e(subwoofer) indicatorAppears when subwoofer is on.f(loudness) indicatorAppears when loudness is on.g(Sound Retriever) indicatorAppears when Sound Retriever function ison.h(iPod connection) indicatorAppears when the iPod connection is recog-nized while USB source is being selected.i(phone book) indicatorAppears when phone book list is displayedwhile telephone source is being selected.j(missed call) indicatorAppears when there are missed call log.Appears when missed call list is displayedwhile telephone source is being selected.Operating this unitEn 13Section02Operating this unit
Basic OperationsPower ON/OFFTurning the unit on%Press SRC to turn the unit on.Turning the unit off%Press OFF and hold until the unit turnsoff.Selecting a sourceYou can select a source you want to listen to.To switch to the built-in CD player, load a discin the unit (refer to page 16).%Press SRC repeatedly to switch be-tween the following sources.XM tuner—Sirius tuner—HD Radio—Tuner—Television—DVD player/Multi-DVD player—Built-in CD player—Multi-CD player—iPod—USB—External unit 1—External unit 2—AUX1—AUX2—BT Audio—BT TelephoneNotes!In the following cases, the sound source willnot change.—When no unit corresponding to the se-lected source is connected.—When there is no disc or magazine in theplayer.—When the iPod is not connected to thisunit.—When AUX (auxiliary input) is set to off(refer to page 47).—When the BT audio source is set to off(refer to Activating the BT AUDIO sourceon page 48).!If the HD Radio tuner is connected to thisunit, tuner source is skipped.!AUX1 is set to on by default. Turn off the AUX1when not in use (refer to Switching the auxili-ary setting on page 47).!Charging the portable audio player usingcar’s DC power source while connecting it toAUX input may generate noise. In this case,stop charging.!External unit refers to a Pioneer product (suchas ones available in the future) that, althoughincompatible as a source, enables control ofbasic functions with this unit. Two externalunits can be controlled with this unit. Whentwo external units are connected, the externalunit is automatically allocated to external unit1 or external unit 2 by this unit.!When this unit’s blue/white lead is connectedto the vehicle’s auto-antenna relay controlterminal, the vehicle’s antenna extends whenthis unit’s source is turned on. To retract theantenna, turn the source off.Adjusting the volume%Use MULTI-CONTROL to adjust thesound level.Operating this unitEn14Section02
TunerBasic Operations%Select a bandPress BAND/ESC.#Band can be selected from among FM1,FM2,FM3 or AM.%Manual tuning (step by step)Push MULTI-CONTROL left or right.%Seek tuningPush and hold MULTI-CONTROL left or right,and then release.#You can cancel seek tuning by pushingMULTI-CONTROL left or right.#While pushing and holding MULTI-CONTROLleft or right, you can skip stations. Seek tuningstarts as soon as you release MULTI-CONTROL.Storing and recalling broadcastfrequenciesYou can easily store up to six broadcast fre-quencies for later recall.!Six stations for each band can be stored inmemory.1 Press LIST.Preset screen is displayed.2 Use MULTI-CONTROL to store the se-lected frequency in memory.Turn to change the preset number. Press andhold to store.3 Use MULTI-CONTROL to select the de-sired station.Turn to change the station. Press to select.#You can also change the station by pushingMULTI-CONTROL up or down.#To return to the ordinary display, pressBAND/ESC or LIST.#If you do not operate the list within about 30seconds, the display automatically returns to theordinary display.Using the remote control%When you find a frequency that youwant to store in memory, press one of pre-set tuning buttons 1 to 6 and hold until thepreset number stops flashing.The number you have pressed will flash in thepreset number indicator and then remain lit.The selected radio station frequency has beenstored in memory.The next time you press the same preset tun-ing button the radio station frequency is re-called from memory.#You can also recall radio station frequenciesassigned to preset tuning numbers by pushingMULTI-CONTROL up or down during the fre-quency display.Introduction to advancedoperations1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectFUNCTION.Turn to change the menu option. Press to se-lect.The function menu is displayed.3 Turn MULTI-CONTROL to select thefunction.BSM (best stations memory)—LOCAL (localseek tuning)Notes!You can also select the function by pressingFUNCTION on the remote control.!To return to the ordinary display, pressBAND/ESC.Storing the strongest broadcastfrequenciesBSM (best stations memory) lets you automa-tically store the six strongest broadcast fre-quencies.Operating this unitEn 15Section02Operating this unit
1 Display the function menu.Refer to Introduction to advanced operationson the previous page.2 Use MULTI-CONTROL to select BSM inthe function menu.3 Press MULTI-CONTROL to turn BSM on.The six strongest broadcast frequencies arestored in the order of their signal strength.#To cancel, press MULTI-CONTROL again.Tuning in strong signalsLocal seek tuning lets you tune in only thoseradio stations with sufficiently strong signalsfor good reception.1 Display the function menu.Refer to Introduction to advanced operationson the previous page.2 Use MULTI-CONTROL to select LOCAL inthe function menu.3 Press MULTI-CONTROL to turn localseek tuning on.#To turn local seek tuning off, pressMULTI-CONTROL again.4 Push MULTI-CONTROL left or right toset the sensitivity.FM: LEVEL 1—LEVEL 2—LEVEL 3—LEVEL 4AM: LEVEL 1—LEVEL 2The LEVEL 4 setting allows reception of onlythe strongest stations, while lower settings letyou receive progressively weaker stations.Built-in CD PlayerBasic Operations%Open the front panelPress OPEN .Disc loading slot appears.Disc loading sloth(eject) button#When loading a disc, face the label side ofa disc up.#To avoid a malfunction, make sure that nometal objects come into contact with the term-inals when the front panel is open.%Eject a discPress h(eject).%Select a folderPush MULTI-CONTROL up or down.#You cannot select a folder that does not havea compressed audio file recorded in it.%Select a trackPush MULTI-CONTROL left or right.%Fast forward or reversePush and hold MULTI-CONTROL left or right.#When playing compressed audio, there is nosound on fast forward or reverse.%Return to root folderPress and hold BAND/ESC.#If folder 01 (ROOT) contains no files, playbackcommences with folder 02.%Switch between compressed audio andCD-DAPress BAND/ESC.#This operation is available only when playingCD-EXTRA or MIXED-MODE CDs.Operating this unitEn16Section02
#If you have switched between compressedaudio and CD-DA, playback starts at the firsttrack on the disc.Notes!The built-in CD player can play back audio CDand compressed audio recorded on a CD-ROM. (Refer to page 72 for files that can beplayed back.)!Read the precautions for discs and player onpage 71.!A disc has already been inserted, press SRC toselect the built-in CD player.!There is sometimes a delay between startingup disc playback and the sound being issued.When being read, FORMAT READ is dis-played.!If an error message is displayed, refer to Errormessages on page 69.!Playback is carried out in order of file number.Folders are skipped if they contain no files. (Iffolder 01 (ROOT) contains no files, playbackcommences with folder 02.)Selecting a track directlyWhen using the remote control, you can selecta track directly by entering the desired tracknumber.!When audio files are being played back,you can select track in the current folder.1 Press DIRECT.Track number input display appears.2 Press 0 to 9 to enter the desired tracknumber.#You can cancel the input number by pressingCLEAR.3 Press DIRECT.The track for the entered number will play.#After entering the number input mode, if youdo not perform an operation within about eightseconds, the mode is automatically canceled.Displaying text information ondisc%Press DISP to select the desired text in-formation.For title entered CDPlay time—disc titleFor CD TEXT discsPlay time—disc title—disc artist name—tracktitle—track artist nameFor WMA/MP3/AACPlay time—folder name—file name—tracktitle—artist name—album title—comment—bit rateFor WAVPlay time—folder name—file name—sam-pling frequencyNotes!You can scroll to the left of the title by pressingand holding DISP.!Audio CD that contains certain informationsuch as text and/or number is CD TEXT.!If specific information is not recorded on adisc, title or name is not displayed.!Depending on the version of iTunes®used towrite MP3 files onto a disc, comment informa-tion may not be correctly displayed.!Depending on the version of Windows MediaPlayer used to encode WMA files, albumnames and other text information may not becorrectly displayed.!When playing back VBR (variable bit rate)-re-corded WMA files, the average bit rate value isdisplayed.!When playing back VBR (variable bit rate)-re-corded MP3 files, VBR is displayed instead ofbit rate value.!The sampling frequency shown in the displaymay be abbreviated.!When Ever Scroll is set to ON at the initial set-ting, text information scrolls continuously inthe display. Refer to Switching the ever scrollon page 48.Operating this unitEn 17Section02Operating this unit
Selecting tracks from the tracktitle listTrack title list lets you see the list of track titleson a CD TEXT disc and select one of them toplay back.1 Press LIST to switch to the track title listmode.2 Use MULTI-CONTROL to select the de-sired track title.Turn to change the track title. Press to play.#You can also change the track title by pushingMULTI-CONTROL up or down.#You can also play the track by pushingMULTI-CONTROL right.#To return to the ordinary display, pressBAND/ESC or LIST.#If you do not operate the list within about 30seconds, the display automatically returns to theordinary display.Selecting files from the filename listFile name list lets you see the list of file names(or folder names) and select one of them toplayback.1 Press LIST to switch to the file name listmode.Names of files and folders appear in the dis-play.2 Use MULTI-CONTROL to select the de-sired file name (or folder name).Turn to change the name of file or folder.—when a file is selected, press to play.—when a folder is selected, press to see a listof files (or folders) in the seleted folder.—when a folder is selected, press and hold toplay a song in the selected folder.#You can also play the file by pushingMULTI-CONTROL right.#You can also play a song in the selected folderby pushing and holding MULTI-CONTROL right.#To return to the previous list (the folder onelevel higher), push MULTI-CONTROL left.#To return to the ordinary display, pressBAND/ESC or LIST.#If you do not operate the list within about 30seconds, the display automatically returns to theordinary display.Introduction to advancedoperations1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectFUNCTION.Turn to change the menu option. Press to se-lect.The function menu is displayed.3 Turn MULTI-CONTROL to select thefunction.REPEAT (repeat play)—RANDOM (randomplay)—SCAN (scan play)—PAUSE (pause)—S. RTRV (sound retriever)—TITLE INPUT (disctitle input)Notes!You can also select the function by pressingFUNCTION on the remote control.!To return to the ordinary display, pressBAND/ESC.!If you do not operate functions except forTITLE INPUT within about 30 seconds, the dis-play automatically returns to the ordinary dis-play.!When playing a compressed audio disc or CDTEXT disc, you cannot switch to disc title inputdisplay.Selecting a repeat play range1 Display the function menu.Refer to Introduction to advanced operationson this page.Operating this unitEn18Section02
2 Use MULTI-CONTROL to select REPEATin the function menu.3 Press MULTI-CONTROL to select the de-sired setting.!DISC –Repeat all tracks!TRACK –Repeat the current track!FOLDER –Repeat the current folder#If you select another folder during repeat play,the repeat play range changes to disc repeat.#Performing track search or fast forward/re-verse during TRACK (track repeat) changes therepeat play range to disc/folder.#When FOLDER (folder repeat) is selected, it isnot possible to play back a subfolder of thatfolder.Playing tracks in random orderTracks in a selected repeat range are played inrandom order.%Press RDM to turn random play on.Tracks play in a random order.#To turn random play off, press RDM again.NoteYou can also turn this function on or off in themenu that appears by using MULTI-CONTROL.Scanning folders and tracksScan play searches the song within the se-lected repeat range.1 Display the function menu.Refer to Introduction to advanced operationson the previous page.2 Use MULTI-CONTROL to select SCAN inthe function menu.3 Press MULTI-CONTROL to turn scan playon.The first 10 seconds of each track is played.4 When you find the desired track pressMULTI-CONTROL to turn scan play off.#If the display has automatically returned tothe playback display, select SCAN again by usingMULTI-CONTROL.#After scanning of a disc (folder) is finished,normal playback of the tracks begins.Pausing playback1 Display the function menu.Refer to Introduction to advanced operationson the previous page.2 Use MULTI-CONTROL to select PAUSE inthe function menu.3 Press MULTI-CONTROL to turn pauseon.Playback of the current track pauses.#To turn pause off, press MULTI-CONTROLagain.Using Sound RetrieverSound Retriever function automatically en-hances compressed audio and restores richsound.%Press S.Rtrv repeatedly to select the de-sired setting.OFF (off)—1—2#2is more effective than 1.NoteYou can also perform this operation in the menuthat appears by using MULTI-CONTROL.Using disc title functionsYou can input CD titles and display the title.The next time you insert a CD for which youhave entered a title, the title of that CD is dis-played.Operating this unitEn 19Section02Operating this unit
Entering disc titlesUse the disc title input feature to store up to48 CD titles in the unit. Each title can be up to10 characters long.1 Display the function menu.Refer to Introduction to advanced operationson page 18.2 Play the CD that you want to enter atitle for.3 Use MULTI-CONTROL to selectTITLE INPUT in the function menu.4 Press MULTI-CONTROL to display thetitle input mode.5 Push MULTI-CONTROL up or down toselect a letter of the alphabet.6 Press DISP to select the desired charac-ter type.Press DISP repeatedly to switch between thefollowing character types:Alphabet—Numbers7 Push MULTI-CONTROL left or right tomove the cursor to the previous or nextcharacter position.8 Move the cursor to the last position bypushing MULTI-CONTROL right after enter-ing the title.When you push MULTI-CONTROL right onemore time, the entered title is stored in mem-ory.9 Press BAND/ESC to return to the play-back display.Notes!Titles remain in memory, even after the disc isremoved from the unit, and are recalled whenthe disc is reinserted.!After data for 48 discs are stored in the mem-ory, data for a new disc overwrites the oldestone.!If you connect a multi-CD player, you caninput disc titles for up to 100 discs.!When a multi-CD player that does not supportdisc title functions is connected, you cannotenter disc titles in this unit.Operating this unitEn20Section02
Playing songs on USB portableaudio player/USB memoryFor details about the supported device, refer toPortable audio player compatibility on page 6.Basic Operations%Select a folderPush MULTI-CONTROL up or down.%Fast forward or reversePush and hold MULTI-CONTROL left or right.%Select a trackPush MULTI-CONTROL left or right.%Return to root folderPress and hold BAND/ESC.Notes!Optimum performance of this unit may not beobtained depending on the connected USBportable audio player/USB memory.!If folder 01 (ROOT) contains no files, playbackcommences with folder 02.!When the USB portable audio player havingbattery charging function is connected to thisunit and the ignition switch is set to ACC orON, the battery is charged.!You can disconnect the USB portable audioplayer/USB memory anytime you want to fin-ish listening to it.!If USB portable audio player/USB memory isconnected to this unit, the source is changedto USB automatically. If you do not use anUSB device, disconnect it from this unit. De-pending on the connected USB device, turn-ing on the ignition switch while USB device isconnected to this unit may change the sourceautomatically.Selecting an audio file directlyin the current folderThe operation is the same as that of the built-in CD player.Refer to Selecting a track directly on page 17.Selecting files from the filename listThe operation is the same as that of the built-in CD player. (Refer to Selecting files from thefile name list on page 18.)Displaying text information ofan audio fileThe operation is the same as that of the built-in CD player.Refer to Displaying text information on disc onpage 17.Notes!If the characters recorded on the audio file arenot compatible with the head unit, those char-acters are not displayed.!If specific information is not recorded on anaudio file, title or name is not displayed.!The text information of some audio files maynot be correctly displayed.!You can scroll the text information to the leftby pressing and holding DISP.!When Ever Scroll is set to ON at the initial set-ting, text information scrolls continuously inthe display. Refer to Switching the ever scrollon page 48.Introduction to advancedoperations1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectFUNCTION.Turn to change the menu option. Press to se-lect.The function menu is displayed.3 Turn MULTI-CONTROL to select thefunction.REPEAT (repeat play)—RANDOM (randomplay)—SCAN (scan play)—PAUSE (pause)—S. RTRV (sound retriever)Operating this unitEn 21Section02Operating this unit
Function and operationREPEAT,RANDOM,SCAN,PAUSE andS. RTRV operations are basically the same asthat of the built-in CD player.Function name OperationREPEATRefer to Selecting a repeat playrange on page 18.However, the repeat play rangesyou can select are different fromthat of the built-in CD player. Therepeat play ranges of the USB por-table audio player/USB memoryare:!TRACK –Repeat just the cur-rent file!FOLDER –Repeat the currentfolder!ALL –Repeat all filesRANDOM Refer to Playing tracks in randomorder on page 19.SCAN Refer to Scanning folders andtracks on page 19.PAUSE Refer to Pausing playback on page19.S. RTRV Refer to Using Sound Retriever onpage 19.Notes!You can also select the function by pressingFUNCTION on the remote control.!To return to the ordinary display, pressBAND/ESC.!If you select another folder during repeat play,the repeat play range changes to ALL.!If you perform track search or fast forward/re-verse during TRACK, the repeat play rangechanges to FOLDER.!When FOLDER is selected, it is not possible toplay back a subfolder of that folder.!After file or folder scanning is finished, nor-mal playback of the files begins again.Playing songs on iPodFor details about the supported iPod, refer toiPod®compatibility on page 7.Basic Operations%Fast forward or reversePush and hold MULTI-CONTROL left or right.%Select a track (chapter)Push MULTI-CONTROL left or right.Notes!When using an iPod, iPod Dock Connector toUSB Cable is required.!Read the precautions for iPod on page 74.!While iPod is connected to this unit, PIONEER(or (check mark)) is displayed on the iPod.!If an error message is displayed, refer to Errormessages on page 69.!When the ignition switch is set to ACC or ON,the iPod’s battery is charged while the iPod isconnected to this unit.!While the iPod is connected to this unit, theiPod cannot be turned on or off.!Before connecting the dock connector of thisunit to the iPod, disconnect the headphonesfrom the iPod.!The iPod is turned off about two minutes afterthe ignition switch is set to OFF.Browsing for a songSearching songs by categoryOperations to control an iPod with this unit isdesigned to be as close to the iPod as possibleto make operation and song search easy.!Depending on the number of files in theiPod, there may be a delay when displayinga list.!If the characters recorded on the iPod arenot compatible with this unit, those charac-ters are not displayed.1 Press LIST.Operating this unitEn22Section02
2 Use MULTI-CONTROL to select a cate-gory.Turn to change the category; press to select.PLAYLISTS (playlists)—ARTISTS (artists)—ALBUMS (albums)—SONGS (songs)—PODCASTS (podcasts)—GENRES (genres)—COMPOSERS (composers)—AUDIOBOOKS(audiobooks)List for the selected category is displayed.#You can start playback throughout the se-lected category by pressing and holdingMULTI-CONTROL. You can also perform this op-eration by pushing and holdingMULTI-CONTROL right.#You can also change the category by pushingMULTI-CONTROL up or down.#You can also select the category by pushingMULTI-CONTROL right.#To return to the previous category, pushMULTI-CONTROL left.3 Repeat step 2 to find a song you wantto listen to.#To return to the top tier of categories, pushand hold MULTI-CONTROL left.#If you do not operate the list within about 30seconds, the display automatically returns to theordinary display.Searching songs by alphabet1 Press LIST.2 Use MULTI-CONTROL to select a cate-gory.Turn to change the category. Press to select.3 Press LIST to switch to alphabet searchmode.4 Turn MULTI-CONTROL to select a de-sired alphabet.5 Press MULTI-CONTROL to display the al-phabetical list.Displaying text information oniPod%Press DISP to select the desired text in-formation.Play time—song title—artist name—albumtitle#If the characters recorded on the iPod are notcompatible with this unit, those characters arenot displayed.Notes!You can scroll the text information to the leftby pressing and holding DISP.!When Ever Scroll is set to ON at the initial set-ting, text information scrolls continuously inthe display. Refer to Switching the ever scrollon page 48.Introduction to advancedoperations1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectFUNCTION.Turn to change the menu option. Press to se-lect.The function menu is displayed.3 Turn MULTI-CONTROL to select thefunction.REPEAT (repeat play)—SHUFFLE (shuffle)—SHUFFLE ALL (shuffle all)—LINK SEARCH(link search)—CONTROL (control mode)—PAUSE (pause)—AUDIOBOOKS (audiobookspeed)—S. RTRV (sound retriever)Function and operationREPEAT,PAUSE and S. RTRV operations arebasically the same as that of the built-in CDplayer.Operating this unitEn 23Section02Operating this unit
Function name OperationREPEATRefer to Selecting a repeat playrange on page 18.However, the repeat play rangesyou can select are different fromthat of the built-in CD player. Therepeat play ranges of the iPod are:!ONE –Repeat the currentsong!ALL –Repeat all songs in theselected listPAUSE Refer to Pausing playback on page19.S. RTRV Refer to Using Sound Retriever onpage 19.Notes!You can also select the function by pressingFUNCTION on the remote control.!To return to the ordinary display, pressBAND/ESC.!If you do not operate functions within about30 seconds, the display automatically returnsto the ordinary display.!When CONTROL is on, only CONTROL andS. RTRV can be operated.Playing songs in a randomorder (shuffle)1 Display the function menu.Refer to Introduction to advanced operationson the previous page.2 Use MULTI-CONTROL to select SHUFFLEin the function menu.3 Press MULTI-CONTROL to select the de-sired setting.!SONGS –Play back songs in the selectedlist in random order.!ALBUMS –Play back songs from a ran-domly selected album in order.!OFF –Cancel random play.Playing all songs in a randomorder (shuffle all)%Press to turn shuffle all on.All songs on the iPod play randomly.#To turn shuffle all off, set SHUFFLE in theFUNCTION menu to off.NoteYou can also turn this function on in the menuthat appears by using MULTI-CONTROL.Selecting songs from album listof currently playing artistAlbum list of the currently selected artist isdisplayed. You can select an album or songfrom the artist name.!Depending on the number of files in theiPod, there may be a delay when displayinga list.1 Press and hold LIST to turn link searchon.Searches albums of the artist and displays thelist.2 Use MULTI-CONTROL to select an albumor song from the list.For more details about the selecting operation,refer to step 2 of Browsing for a song on page22.Notes!If link search is aborted, NOT FOUND is dis-played.!You can also turn this function on in the menuthat appears by using MULTI-CONTROL.Operating this unit’s iPodfunction from your iPodThis function cannot be operated with the fol-lowing iPod models.—iPod nano first generation (software version1.3.1)Operating this unitEn24Section02
—iPod fifth generation (software version 1.2.1)This unit’s iPod function can be operated fromyour iPod. Sound can be heard from car’sspeaker, and operation can be conducted fromyour iPod.!While this function is in use, even if theignition key is turned off, iPod is not turnedoff. To turn off power, operate the iPod.1 Press iPod and hold to switch the con-trol mode.#Each pressing and holding iPod switches thecontrol mode.#While using this function, play time and titlesare not displayed on this unit.#Even if this function is performed, track up/down can be operated from this unit.#While using this function, browse functioncannot be operated from this unit.2 Operate the connected iPod to select asong and play.NoteYou can also turn this function on or off in themenu that appears by using MULTI-CONTROL.Changing audiobook speedWhile listening to an audiobook on iPod, play-back speed can be changed.1 Display the function menu.Refer to Introduction to advanced operationson page 23.2 Use MULTI-CONTROL to selectAUDIOBOOKS in the function menu.3 Press MULTI-CONTROL to select the de-sired setting.!FASTER –Playback faster than normalspeed!SLOWER –Playback slower than normalspeed!NORMAL –Playback in normal speedBluetooth AudioImportant!Depending on the Bluetooth audio player con-nected to this unit, the operations availablewith this unit are limited to the following twolevels:—Lower level: Only playing back songs onyour audio player is possible.—Higher level: Playing back, pausing, select-ing songs, etc., are possible (all the opera-tions illustrated in this manual).!Since there are a number of Bluetooth audioplayers available on the market, operationswith your Bluetooth audio player using thisunit vary extensively. Refer to the instructionmanual that came with your Bluetooth audioplayer as well as this manual while operatingyour player on this unit.!Information about songs (e.g. the elapsedplaying time, song title, song index, etc.) can-not be displayed on this unit.!While you are listening to songs on your Blue-tooth audio player, refrain from using on yourcellular phone as much as possible. If you useyour cellular phone, the signal from your cel-lular phone may cause noise on the song play-back.!When you are talking on a cellular phone con-nected to this unit via Bluetooth wireless tech-nology, song playback from your Bluetoothaudio player connected to this unit is muted.!Even if you are listening to a song on yourBluetooth audio player and you switch to an-other source, song playback continues.Connecting a Bluetooth audioplayer!Before you can use audio players you mayneed to enter the PIN code into this unit. Ifyour player requires a PIN code to establisha connection, look for the code on theplayer or in its accompanying documenta-tion. Refer to Entering PIN code for Blue-tooth wireless connection on page 48.Operating this unitEn 25Section02Operating this unit
Using a Bluetooth audio player toinitiate a connection1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectCONNECTION.Turn to change the menu option. Press to se-lect.#You can also select this menu by pressing andholding PHONE//CONNECT on the ordinarydisplay.3 Turn MULTI-CONTROL to selectBT AUDIO DEVICE.#If there is previous connection log in this unit,you can select the Bluetooth device fromPAIRED DEVICE.Refer to Connecting a paired Bluetooth audioplayer.4 Use MULTI-CONTROL to select a group.Push MULTI-CONTROL up or down to select agroup.NOKIA (Nokia)—STANDARD (standard)#Normally select STANDARD. If the device ofNokia is not paired to this unit, select NOKIA.#Push MULTI-CONTROL left or right to displaya group name or an ID.5 Press MULTI-CONTROL to open the con-nection.READY will be displayed.#This unit is now on standby for connectionfrom Bluetooth audio player.#Push MULTI-CONTROL left or right to displaythe device name, BD address and PIN code ofthis unit.6 Use your Bluetooth audio player to es-tablish connection.PIN code is set to 0000 as the default. You canchange this code in the initial setting. Refer toEntering PIN code for Bluetooth wireless con-nection on page 48.While connecting, CONNECTING is displayed.If the connection is established, CONNECTEDis displayed.Connecting a paired Bluetooth audioplayer1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectCONNECTION.Turn to change the menu option. Press to se-lect.3 Turn MULTI-CONTROL to selectPAIRED DEVICE.Paired device name will be displayed.#Push MULTI-CONTROL left or right to switchthe device name, BD address, group name andgroup ID.4 Press MULTI-CONTROL to establish con-nection.#While connecting, CONNECTING flashes. Ifthe connection is established, CONNECTED isdisplayed.#If the connection fails, ERROR is displayed. Inthis case, try again from the beginning.Disconnecting a Bluetoothaudio playerThis function can be operated only when theBluetooth wireless connection is being estab-lished.1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectCONNECTION.Turn to change the menu option. Press to se-lect.3 Turn MULTI-CONTROL to selectDISCONNECT AUDIO.4 Press MULTI-CONTROL to disconnectthe Bluetooth wireless connection.Operating this unitEn26Section02
Basic Operations%Fast forward or reversePush and hold MULTI-CONTROL left or right.%Select a trackPush MULTI-CONTROL left or right.NoteEven though your audio player does not contain aBluetooth module, you can still control it fromthis unit via Bluetooth wireless technology. Tocontrol your audio player using this unit, connecta product featuring Bluetooth wireless technol-ogy (available on the market) to your audio player.Introduction to advancedoperations1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectFUNCTION.Turn to change the menu option. Press to se-lect.The function menu is displayed.3 Turn MULTI-CONTROL to select thefunction.PLAY (play)—STOP (stop)—PAUSE (pause)—AUTO CONNECT (automatic connection set-ting)—DEVICE INFO (device information)Function and operationPAUSE is the same as that of the built-in CDplayer.Function name OperationPAUSE Refer to Pausing playback on page19.Notes!You can also select the function by pressingFUNCTION on the remote control.!To return to the ordinary display, pressBAND/ESC.!If a Bluetooth audio player is not connected tothis unit yet, AUTO CONNECT andDEVICE INFO appear in the function menuand other functions are not available.!If a Bluetooth audio player is connected viaA2DP (Advanced Audio Distribution Profile),only AUTO CONNECT and DEVICE INFO ap-pear in the function menu.!If you do not operate functions within about30 seconds, the display automatically returnsto the ordinary display.Playing songs on a Bluetoothaudio player1 Display the function menu.Refer to Introduction to advanced operationson this page.2 Use MULTI-CONTROL to select PLAY inthe function menu.3 Press MULTI-CONTROL to start play-back.Stopping playback1 Display the function menu.Refer to Introduction to advanced operationson this page.2 Use MULTI-CONTROL to select STOP inthe function menu.3 Press MULTI-CONTROL to stop the play-back.Connecting to a Bluetoothaudio player automatically!Initially, this function is set to on.1 Display the function menu.Refer to Introduction to advanced operationson this page.2 Use MULTI-CONTROL to selectAUTO CONNECT in the function menu.Operating this unitEn 27Section02Operating this unit
3 Press MULTI-CONTROL to turn auto-matic connection on.If your Bluetooth audio player is ready forBluetooth wireless connection, connection tothis unit is automatically established.#To turn automatic connection off, pressMULTI-CONTROL again.Displaying BD (BluetoothDevice) addressThis unit displays the BD address of this unit.1 Display the function menu.Refer to Introduction to advanced operationson the previous page.2 Use MULTI-CONTROL to selectDEVICE INFO in the function menu.3 Push MULTI-CONTROL left to switch tothe BD address.12-digit hexadecimal string is displayed.#Pushing MULTI-CONTROL right returns to thedevice name.Bluetooth TelephoneImportant!Since this unit is on standby to connect withyour cellular phone via Bluetooth wirelesstechnology, using this unit without runningthe engine can result in battery drainage.!Advanced operations that require your atten-tion such as dialing numbers on the monitor,using phone book, etc., are prohibited whileyou are driving. When you need to use theseadvanced operations, stop your vehicle in asafe place.Setting up for hands-free phoningBefore you can use the hands-free phoningfunction you must set up the unit for use withyour cellular phone. This entails establishing aBluetooth wireless connection between thisunit and your phone, pairing your phone withthis unit, and adjusting the volume level.1 ConnectionFor detailed instructions on connecting yourphone to this unit via Bluetooth wireless tech-nology, refer to Connecting and disconnectinga cellular phone on the next page.2 PairingPairing is usually performed automaticallyduring the connection operation. You onlyneed to perform this operation manually whenyour phone is connected temporarily for anyreason.We recommend you pair the phone to this unitto make best use of the technology.To pair your temporarily connected phone,refer to Pairing a connected cellular phone onpage 31.3 Volume adjustmentAdjust the earpiece volume on your cellularphone for comfort. When adjusted, the volumelevel is recorded in this unit as the default set-ting.#Caller’s voice volume and ring volume mayvary depending on the type of cellular phone.Operating this unitEn28Section02
#If the difference between the ring volume andcaller’s voice volume is big, overall volume levelmay become unstable.#Before disconnecting the cellular phone fromthis unit, make sure to adjust the volume to aproper level. If the volume is muted (zero level) onyour cellular phone, the volume level of your cel-lular phone remains muted even after the cellularphone is disconnected.Notes!The equalizer curve for the phone source isfixed.!When selecting the phone source, you canonly operate FADER (balance adjustment) inthe audio menu.!When selecting the phone source, the fadervalue is set to FADER :F15 as an initial setting.Introduction of connection andregistration1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectCONNECTION.The connection menu is displayed.Turn to change the menu option. Press to se-lect.#You can also select this menu by pressing andholding PHONE//CONNECT on the ordinarydisplay.3 Turn MULTI-CONTROL to select thefunction.PAIRED PHONE (paired phone)—BT HANDS FREE (new phone)—SET PHONE(phone registration)—DISCONNECT PHONE(disconnect phone)—DELETE PHONE (deletephone)If the phone is not connected and notpairedThe following function can be operated.!BT HANDS FREE (new phone)If the phone is not connected but pairedThe following functions can be operated.!PAIRED PHONE (pair phone manually)!BT HANDS FREE (new phone)!DELETE PHONE (delete phone)If the phone is connected but not pairedThe following functions can be operated.!SET PHONE (phone registration)!DISCONNECT PHONE (disconnect phone)!DELETE PHONE (delete phone)If the phone is connected and pairedThe following functions can be operated.!DISCONNECT PHONE (disconnect phone)!DELETE PHONE (delete phone)Notes!The device name is set to PIONEER FLAP BTas default. You can change the device namein the initial setting. Refer to Editing devicename on page 49.!PIN code is set to 0000 as the default. Youcan change this code in the initial setting.Refer to Entering PIN code for Bluetooth wire-less connection on page 48.Connecting and disconnectinga cellular phoneUsing a cellular phone to initiate aconnection1 Display the connection menu.Refer to Introduction of connection and regis-tration on this page.2 Use MULTI-CONTROL to selectBT HANDS FREE.3 Use MULTI-CONTROL to select a group.Push MULTI-CONTROL up or down to select agroup.NOKIA (Nokia)—STANDARD (standard)#Normally select STANDARD. If the device ofNokia is not paired to this unit, select NOKIA.#Push MULTI-CONTROL left or right to displaya group name or an ID.4 Press MULTI-CONTROL to switch toPAIRE FROM PHONE.Push MULTI-CONTROL up or down to switchPAIRE FROM PHONE and SEARCH DEVICE.Operating this unitEn 29Section02Operating this unit
5 Select PAIRE FROM PHONE and thenpress MULTI-CONTROL to ready for pairing.READY will be displayed.6 Use your cellular phone to establishconnection.PIN code is set to 0000 as the default. You canchange this code in the initial setting. Refer toEntering PIN code for Bluetooth wireless con-nection on page 48.While connecting, CONNECTING is displayed.If the connection is established, COMPLETEDis displayed.After connected, this unit automaticallychanges to PH. BOOK DL (phone book down-load confirmation) display.#If the connection fails, ERROR is displayed. Inthis case, check the cellular phone and try again.#If three cellular phones have already beenpaired, the pairing assignment selection displaywill appear. Select one assignment to pair thenew phone. The newly paired phone overwritesthe previously paired phone. The assignment se-lection operation is the same as Step 3 to 4 ofPairing a connected cellular phone on the nextpage except for the operation below.!Switching the BD address and device name7 Use MULTI-CONTROL to decide todownload the phone book from your cellu-lar phone or not.Push MULTI-CONTROL left or right to selectNO (No) or YES (Yes).Press MULTI-CONTROL to decide.When you select YES, this unit changes toPH BOOK DOWNLOAD and the download op-eration automatically begins. After complet-ing, DATA DOWNLOADED is displayed.According to the circumstances, this unitchanges to PH BOOK TRANSFER. In this case,refer to step 4 on Transferring entries to thephone book on page 39.#When you select NO, the display reverts tonormal.Using this unit to initiate a connection1 Display the connection menu.Refer to Introduction of connection and regis-tration on the previous page.2 Use MULTI-CONTROL to selectBT HANDS FREE.3 Use MULTI-CONTROL to select a group.Push MULTI-CONTROL up or down to select agroup.NOKIA (Nokia)—STANDARD (standard)#Normally select STANDARD. If the device ofNokia is not paired to this unit, select NOKIA.#Push MULTI-CONTROL left or right to displaya group name or an ID.4 Press MULTI-CONTROL to switch toPAIRE FROM PHONE.Push MULTI-CONTROL up or down to switchPAIRE FROM PHONE and SEARCH DEVICE.5 Select SEARCH DEVICE and then pressMULTI-CONTROL to start searching.While searching, SEARCHING is displayed.#If this unit fails to find any available cellularphones, NOT FOUND is displayed.6 Use MULTI-CONTROL to select a device.Push MULTI-CONTROL up or down to select adevice name you want to connect.Press MULTI-CONTROL to select a devicename.#Push MULTI-CONTROL left or right to switchthe BD address and device name.7 Use your cellular phone to establishconnection.PIN code is set to 0000 as the default. You canchange this code in the initial setting. Refer toEntering PIN code for Bluetooth wireless con-nection on page 48.While connecting, CONNECTING is displayed.If the connection is established, COMPLETEDis displayed.After connected, this unit automaticallychanges to PH. BOOK DL (phone book down-load confirmation) display.Operating this unitEn30Section02
#If the connection fails, ERROR is displayed. Inthis case, check the cellular phone and try again.#If three cellular phones have already beenpaired, the pairing assignment selection displaywill appear. Select one assignment to pair thenew phone. The newly paired phone overwritesthe previously paired phone. The assignment se-lection operation is the same as Step 3 to 4 ofPairing a connected cellular phone on this page ex-cept for the operation below.!Switching the BD address and device name8 Use MULTI-CONTROL to decide todownload the phone book from your cellu-lar phone or not.Push MULTI-CONTROL left or right to selectNO (No) or YES (Yes).Press MULTI-CONTROL to decide.When you select YES, this unit changes toPH BOOK DOWNLOAD and the download op-eration automatically begins. After complet-ing, DATA DOWNLOADED is displayed.According to the circumstances, this unitchanges to PH BOOK TRANSFER. In this case,refer to step 4 on Transferring entries to thephone book on page 39.#When you select NO, the display reverts tonormal.Connecting a paired cellular phone1 Display the connection menu.Refer to Introduction of connection and regis-tration on page 29.2 Turn MULTI-CONTROL to selectPAIRED PHONE.#Push MULTI-CONTROL up or down to select adesired phone.#Push MULTI-CONTROL left or right to switchthe device name, BD address, group name andgroup ID.3 Press MULTI-CONTROL to start connec-tion.While connecting, CONNECTING is displayed.If the connection is established, CONNECTEDis displayed.After connected, this unit automaticallychanges to PH. BOOK DL (phone book down-load confirmation) display.#If the connection fails, ERROR is displayed. Inthis case, check the cellular phone and try again.4 Use MULTI-CONTROL to decide todownload the phone book from your cellu-lar phone or not.Push MULTI-CONTROL left or right to selectNO (No) or YES (Yes).Press MULTI-CONTROL to decide.When you select YES, this unit changes toPH BOOK DOWNLOAD and the download op-eration automatically begins. After complet-ing, DATA DOWNLOADED is displayed.#When you select NO, the display reverts tonormal.Disconnecting a cellular phone1 Display the connection menu.Refer to Introduction of connection and regis-tration on page 29.2 Use MULTI-CONTROL to selectDISCONNECT PHONE.3 Press MULTI-CONTROL to disconnect acellular phone from this unit.After disconnection is completed,DISCONNECTED is displayed.Pairing a connected cellular phonePairing is usually performed automatically dur-ing the connection operation. You only need toperform this operation manually when yourphone is connected temporarily for any reason.We recommend you pair the phone to this unitto make best use of the technology.1 Display the connection menu.Refer to Introduction of connection and regis-tration on page 29.2 Use MULTI-CONTROL to selectSET PHONE.Operating this unitEn 31Section02Operating this unit
3 Push MULTI-CONTROL up or down toselect a pairing assignment.1(user phone 1)—2(user phone 2)—3(userphone 3)#Push MULTI-CONTROL left or right to switchthe BD address and device name.#If a phone is already assigned to the userphone number, the new phone will overwrite theold one.#As you select each assignment, you can seewhether or not a phone is already paired. If theassignment is empty, NO DATA is displayed.4 Press MULTI-CONTROL to pair the cur-rently connected phone.When pairing is completed, COMPLETED isdisplayed.#If the pairing fails, REGISTER ERROR is dis-played. In this case, return to step 1 and tryagain.Deleting a registered phone1 Display the connection menu.Refer to Introduction of connection and regis-tration on page 29.2 Use MULTI-CONTROL to selectDELETE PHONE.3 Push MULTI-CONTROL up or down toselect a pairing assignment.1(user phone 1)—2(user phone 2)—3(userphone 3)#Push MULTI-CONTROL left to display the BDaddress of the selected device.#If the assignment is empty, NO DATA is dis-played and operation is not possible.4 Push MULTI-CONTROL right to selectDELETE YES.DELETE YES is displayed. Deleting phone isnow on standby.5 Press MULTI-CONTROL to delete thephone.After the phone is deleted, DELETED is dis-played.Making a phone callDial a numberThe most basic way to make a call is to simplydial the number.Refer to Making a call by entering phone num-ber on page 40 for detailed instructions.Calling a number in the Phone Bookor the Call HistoryRefer to Calling a number in the phone book onpage 34 and Using the call history on page 34for detailed instructions.Preset numberNumbers that you dial frequently can be as-signed to presets for quick recall.Refer to Using preset numbers on page 36 forhow to assign a number to a preset.Voice recognitionIf your cellular phone features voice recogni-tion technology, you can make a call by voicecommands.!Operation varies depending on the type ofcellular phone. Refer to the instructionmanual that came with your cellular phonefor detailed instructions.!This function can be operated only whenthe connection is established with HFP(Hands Free Profile).1 Press BAND/ESC and hold untilVOICE DIAL appears in the display.When VOICE DIAL ON is displayed, voice re-cognition function is ready.#If your cellular phone does not feature voicerecognition function, NO VOICE DIAL appears inthe display and operation is not possible.2 Pronounce the name of your contact.Operating this unitEn32Section02
Taking a phone callAnswering or rejecting an incoming call%Answering an incoming callWhen a call comes in, pressMULTI-CONTROL.#You can also take a phone call by pressingOFF HOOK on the remote control.%End a callPress .#You can also end the call by pressingON HOOK on the remote control.%Rejecting an incoming callWhen a call comes in, press .#You can also reject an incoming call by press-ing ON HOOK on the remote control.%Put the call on holdPress MUTE while talking on the phone.#You can also perform the same operation bypressing on the remote control.Notes!Pressing MULTI-CONTROL while talking onthe phone changes into ECHO CANCEL ofFUNCTION. For details on ECHO CANCEL,refer to Echo canceling and noise reduction onpage 39.!The estimated call time appears in the display(this may differ slightly from the actual calltime).Operating a call waiting%Answering a call waitingWhen a call comes in, pressMULTI-CONTROL.#You can also answer a call waiting by pressingOFF HOOK on the remote control.%End all callsPress .#You can also end all calls by pressingON HOOK on the remote control.%Switch between callers on holdPress MULTI-CONTROL.#You can also switch between callers on holdby pressing OFF HOOK on the remote control.%Rejecting call waitingPress .#You can also reject call waiting by pressingON HOOK on the remote control.NoteTo end the call, both you and your caller need tohang up the phone.Using the phone number listImportantBe sure to park your vehicle and apply the park-ing brake when operating the list.%Press LIST to display the list.Press LIST repeatedly to switch between thefollowing lists:RECENT CALLS (call history)—ABC SEARCH(phone book)—DIAL PRESET (preset numberlist)!For more details about the call history, referto Using the call history on the next page.!For more details about the Phone Book list,refer to Using the phone book on the nextpage.!For more details about the preset numberlist, refer to Using preset numbers on page36.Operating this unitEn 33Section02Operating this unit
#If no phone numbers are stored in the se-lected list, NO DATA is displayed.Using the call historyThe 20 most recent calls dialed, received, andmissed are stored in the call history. You canbrowse the call history and call numbers fromit.1 Press LIST to display RECENT CALLS (callhistory list).Refer to Using the phone number list on theprevious page.2 Turn MULTI-CONTROL to select a phonenumber.Turning MULTI-CONTROL to change thephone numbers stored in the list.#If the phone number is already in the phonebook, the corresponding name is displayed.In this case, press and hold DISP to scroll thename.#You can also change the phone number bypushing MULTI-CONTROL up or down.3 Push MULTI-CONTROL right to displaythe detailed list.Name, phone number and date are displayedin the detailed list.#If the number is already in the Phone Bookthen the name is also displayed.#Turning MULTI-CONTROL switches to the pre-vious or next phone number diplayed in the de-tailed list.#If you do not operate anything within about 30seconds, the list display is canceled automati-cally.4 Press MULTI-CONTROL to make a call.#While in the phone number list, press andhold MULTI-CONTROL to add or delete +to thephone number.5 To end the call, press .Using the phone bookBefore using the phone book, you need to setup the phone book. To set up the phone book,refer to Downloading phone books from yourcellular phone on page 38 and refer to Transfer-ring entries to the phone book on page 39.Calling a number in the phone bookAfter finding the number you want to call inthe phone book, you can select the entry andmake the call.1 Press LIST to display ABC SEARCH(phone book).Refer to Using the phone number list on theprevious page.2 Turn MULTI-CONTROL to select the firstletter of the name you are looking for.#You can also perform the same operation bypushing MULTI-CONTROL up or down.3 Press MULTI-CONTROL to display en-tries.The display shows the first Phone Book entrystarting with that letter (e.g. “Ben”,“Brian”and “Burt”when “B”is selected).4 Turn MULTI-CONTROL to select a phonebook entry you want to call.#You can also perform the same operation bypushing MULTI-CONTROL up or down.#You can scroll literal information by pressingand holding DISP.5 Press MULTI-CONTROL to display thephone number list of the selected entry.#You can also display the phone number list ofthe selected entry by pushing MULTI-CONTROLright.#You can scroll literal information by pressingand holding DISP.#If several phone numbers are included in anentry, select one by turning MULTI-CONTROL.#If you want to go back and select anotherentry, push MULTI-CONTROL left.6 Press MULTI-CONTROL to make a call.7 To end the call, press .Operating this unitEn34Section02
Editing phone numbersYou can edit the phone numbers of phonebook entries.1 Display the phone number list of yourdesired phone book entry.See step 1 to 5 on Calling a number in thephone book on the previous page for how to dothis.2 Press and hold MULTI-CONTROL to dis-play the edit screen.3 Turn MULTI-CONTROL to displayEDIT NUMBER (number edit screen).Turning MULTI-CONTROL switches inputscreens in the following order:EDIT NUMBER (number edit screen)—EDIT GENRE (genre edit screen)—CLR MEMO(clear memory screen)4 Push MULTI-CONTROL left or right tomove the cursor to the number you wantto change.5 Push MULTI-CONTROL up or down tochange numbers.Repeat these steps until you have finishedchanging the number.#Press and hold MULTI-CONTROL to add ordelete +to the phone number.6 Press MULTI-CONTROL to store the newnumber.After the number is stored, the display revertsto the detailed list.Assign genres to phone numbersIf there are a lot of entries in the Phone Book itcan be useful to assign them to specific gen-res (categories) for easier searching. There arefour preset genres that you can assign entriesto: HOME,MOBILE,OFFICE and OTHERS.1 Display the phone number list of yourdesired phone book entry.See step 1 to 5 on Calling a number in thephone book on the previous page for how to dothis.2 Press and hold MULTI-CONTROL to dis-play the edit screen.3 Turn MULTI-CONTROL to displayEDIT GENRE (genre edit screen).Turning MULTI-CONTROL switches inputscreens in the following order:EDIT NUMBER (number edit screen)—EDIT GENRE (genre edit screen)—CLR MEMO(clear memory screen)4 Push MULTI-CONTROL up or down toselect a genre.Each time MULTI-CONTROL is pushed up ordown, the genres are switched in the followingorder:HOME (home)—MOBILE (mobile)—OFFICE(office)—OTHERS (other)5 Press MULTI-CONTROL to assign agenre to the phone number.The selected genre is assigned to the phonenumber, and the display reverts to the detailedlist.Clearing a phone book entry1 Display the phone number list of yourdesired phone book entry.See step 1 to 5 on Calling a number in thephone book on the previous page for how to dothis.2 Press and hold MULTI-CONTROL to dis-play the edit screen.3 Turn MULTI-CONTROL to displayCLR MEMO (clear memory screen).Turning MULTI-CONTROL switches inputscreens in the following order:EDIT NUMBER (number edit screen)—EDIT GENRE (genre edit screen)—CLR MEMO(clear memory screen)4 Push MULTI-CONTROL right to show aconfirmation display.CLEAR MEMORY YES is displayed.#If you do not want to clear the memory thatyou have selected, push MULTI-CONTROL left.The display reverts to normal.Operating this unitEn 35Section02Operating this unit
5 Press MULTI-CONTROL to delete thePhone Book entry.The Phone Book entry is deleted andCLEARED is displayed. The display returns toPhone Book entry list.Using preset numbersNumbers that you dial frequently can be as-signed to presets for quick recall.Assigning preset numbers1 Press LIST to display DIAL PRESET (pre-set number list).Refer to Using the phone number list on page33.2 Turn MULTI-CONTROL to switch presetnumbers.You can select preset number from 1to 10.#Press and hold DISP to scroll the phone num-ber.#If the phone number is already in the phonebook, the corresponding name is displayed.In this case, press and hold DISP to scroll thename.#You can also change the phone number bypushing MULTI-CONTROL up or down.3 Press MULTI-CONTROL to select a presetnumber that you want to assign a phonenumber to.4 Press and hold MULTI-CONTROL to dis-play MEMORY.Push MULTI-CONTROL up or down to switchMEMORY (memory) and DELETE (delete).#If a phone number is already stored in the se-lected preset number, the new phone number willoverwrite the old one.#For details on deleting, refer to Deleting presetnumbers on this page.5 Select MEMORY and then pressMULTI-CONTROL to display the phonebook.6 Turn MULTI-CONTROL to select the firstletter of the name you are looking for.#You can also perform the same operation bypushing MULTI-CONTROL up or down.7 Press MULTI-CONTROL to display en-tries.The display shows the first three Phone Bookentries starting with that letter (e.g. “Ben”,“Brian”and “Burt”when “B”is selected).8 Turn MULTI-CONTROL to select a phonebook entry you want to store in the presetlist.#You can also perform the same operation bypushing MULTI-CONTROL up or down.#You can scroll literal information by pressingand holding DISP.9 Press MULTI-CONTROL to display thephone number list of the selected entry.#You can also display the phone number list ofthe selected entry by pushing MULTI-CONTROLright.#If several phone numbers are included in anentry, select one by turning MULTI-CONTROL.#You can scroll literal information by pressingand holding DISP.#If you want to go back and select anotherentry, push MULTI-CONTROL left.10 Press MULTI-CONTROL to store thephone number in the preset list.Deleting preset numbers1 Press LIST to display DIAL PRESET (pre-set number list).Refer to Using the phone number list on page33.2 Turn MULTI-CONTROL to switch presetnumbers.#Press and hold DISP to scroll the phone num-ber.#If the phone number is already in the phonebook, the corresponding name is displayed.In this case, press and hold DISP to scroll thename.#You can also change the preset phone num-ber by pushing MULTI-CONTROL up or down.Operating this unitEn36Section02
3 Press MULTI-CONTROL to select a presetphone number that you want to delete.4 Press and hold MULTI-CONTROL to dis-play MEMORY.Push MULTI-CONTROL up or down to switchMEMORY (memory) and DELETE (delete).#About assigning , Assigning preset numberson the previous page.5 Select DELETE and then pressMULTI-CONTROL to delete the presetphone number.Calling a number in the preset listAfter finding the number you want to call inthe preset list, you can select the entry andmake a call.1 Press LIST to display DIAL PRESET (pre-set number list).Refer to Using the phone number list on page33.2 Turn MULTI-CONTROL to select thephone number.#Press and hold DISP to scroll the phone num-ber.#If the phone number is already in the phonebook, the corresponding name is displayed.In this case, press and hold DISP to scroll thename.#You can also change the phone number bypushing MULTI-CONTROL up or down.3 Press MULTI-CONTROL to make a call.4 To end the call, press .Assigning preset numbers by usingMULTI-CONTROL1 Push MULTI-CONTROL up or down toswitch preset numbers.2 Perform from step 4 to 10 of Assigningpreset numbers on the previous page.Assigning preset numbers by usingremote control1 Press thumb pad to displayRECENT CALLS (call history list).2 Push thumb pad up or down to select aphone number.3 Press a number from 0 to 9 and hold topreset in memory.Preset number 10 is assigned to 0.Calling number in the preset list byusing MULTI-CONTROL1 Push MULTI-CONTROL up or down toswitch preset numbers.2 Press MULTI-CONTROL to make a call.3 To end the call, press .Calling number in the preset list byusing remote control1 Push thumb pad up or down to select apreset phone number.#Pressing a number from 0to 9also recalls thepreset phone number.2 Press thumb pad to make a call.#Pressing OFF HOOK can also make a call.3 To end the call, press ON HOOK.Introduction to advancedoperations1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectFUNCTION.The function menu is displayed.Turn to change the menu option. Press to se-lect.Operating this unitEn 37Section02Operating this unit
3 Turn MULTI-CONTROL to select thefunction.PH BOOK DOWNLOAD (phone book down-load)—PH BOOK TRANSFER (phone booktransfer)—AUTO CONNECT (automatic con-nection setting)—AUTO ANSWER (automaticanswer setting)—ECHO CANCEL (echo can-cel)—RING TONE (ring tone select)—NUMBER DIAL (call by entering number)—CLR MEMO (clear memory)—PH. B. NAME VIEW (phone book name view)—MENU (menu language)—DEVICE INFO(device information)If not connected yetThe following functions cannot be operated.!PH BOOK DOWNLOAD (phone bookdownload)!ECHO CANCEL (echo cancel)!NUMBER DIAL (call by entering number)!CLR MEMO (clear memory)!PH. B. NAME VIEW (phone book nameview)If connected but not paired yetThe following functions cannot be operated.!PH BOOK DOWNLOAD (phone bookdownload)!ECHO CANCEL (echo cancel)!CLR MEMO (clear memory)!PH. B. NAME VIEW (phone book nameview)Notes!You can also select the function by pressingFUNCTION on the remote control.!To return to the playback display, pressBAND/ESC.!DEVICE INFO is the same as that of the Blue-tooth audio. (Refer to Displaying BD (BluetoothDevice) address on page 28.)!If cellular phone is connected to this unit viaBluetooth wireless technology with HFP(Hands-Free Profile), PBAP (Phone Book Ac-cess Profile) and SPP (Serial Port Profile),PH BOOK DOWNLOAD can be operated.!If you do not operate functions other thanPH BOOK DOWNLOAD,PH BOOK TRANSFER, and NUMBER DIALwithin about 30 seconds, the display automati-cally returns to the ordinary display.Downloading phone booksfrom your cellular phonePhone books in your cellular phone can bedownloaded and stored in this unit.!Depending on the cellular phone, you can-not use this function.!400 entries for each user (max. 3 users) canbe stored in the phone book. Each indepen-dent entry can hold three phone numbersand genres.1 Display the function menu.Refer to Introduction to advanced operationson the previous page.2 Use MULTI-CONTROL to selectPH BOOK DOWNLOAD.3 Press MULTI-CONTROL to enter in thephone book download standby mode.Phone book downloading starts automatically.When phone book download is completed,DATA DOWNLOADED is displayed.#The display indicates how many entries havebeen transferred and the total number to betransferred.#If the ID and the password are requested, referto Entering the ID and the password on this page.Entering the ID and the passwordIf the ID and the password are requested, readthe following instructions to enter the ID andthe password.!Up to 20 characters can be entered for theID and up to 16 characters can be enteredfor the password.1 Press DISP to switch between alphabetand numbers.Press DISP repeatedly to switch between thefollowing character types:Alphabet—Numbers and symbols2 Push MULTI-CONTROL up or down toselect a letter.Operating this unitEn38Section02
3 Push MULTI-CONTROL left or right tomove the cursor to the previous or nextcharacter position.4 Press MULTI-CONTROL to determinethe ID and the password.5 After entering the ID and password,use your cellular phone to continue theprocedure.Transferring entries to thephone bookPhone books in your cellular phone can betransferred to this unit by using your cellularphone.!400 entries for each user (max. 3 users) canbe stored in the phone book. Each indepen-dent entry can hold three phone numbersand genres.1 Display the function menu.Refer to Introduction to advanced operationson page 37.2 Use MULTI-CONTROL to selectPH BOOK TRANSFER.3 Press MULTI-CONTROL to enter thephone book transfer standby mode.4 Use the cellular phone to performphone book transfer.Perform phone book transfer using the cellu-lar phone. For detailed instructions, refer tothe instruction manual that came with yourcellular phone.When phone book transfer is completed,DATA TRANSFERRED is displayed.#The display indicates how many entries havebeen transferred and the total number to betransferred.Setting the automatic connectionIt is possible to set the automatic connectionbetween your cellular phone and this unit. Ifthis function is set to on, connection betweenyour cellular phone and this unit will takeplace automatically as soon as the two devicesare less than a few meters apart.!With some cellular phones, it may not bepossible to perform the automatic connec-tion.1 Display the function menu.Refer to Introduction to advanced operationson page 37.2 Use MULTI-CONTROL to selectAUTO CONNECT.3 Press MULTI-CONTROL to turn auto-matic connection on.#To turn automatic connection off, pressMULTI-CONTROL again.NoteAutomatic connection is performed in the regis-tration number order.Setting automatic answering1 Display the function menu.Refer to Introduction to advanced operationson page 37.2 Use MULTI-CONTROL to selectAUTO ANSWER.3 Press MULTI-CONTROL to turn auto-matic answering on.#To turn automatic answering function off,press MULTI-CONTROL again.Echo canceling and noise reduction1 Display the function menu.Refer to Introduction to advanced operationson page 37.2 Use MULTI-CONTROL to selectECHO CANCEL.3 Push MULTI-CONTROL left or right toselect the desired setting.OFF (off)—LOW—MID—HIGH#This function can be performed even whiletalking on the phone. In this case, pressMULTI-CONTROL to switch to ECHO CANCEL.Operating this unitEn 39Section02Operating this unit
Switching the ring tone1 Display the function menu.Refer to Introduction to advanced operationson page 37.2 Use MULTI-CONTROL to selectRING TONE in the function menu.3 Push MULTI-CONTROL left or right toselect the desired setting.OFF (off)—1—2—3Making a call by enteringphone numberImportantBe sure to park your vehicle and apply the park-ing brake when performing this operation.1 Display the function menu.Refer to Introduction to advanced operationson page 37.2 Use MULTI-CONTROL to selectNUMBER DIAL.#You can also press DIRECT on the remote con-trol to enter in this menu from the standby dis-play.3 Push MULTI-CONTROL up or down toselect a number.#You can also perform the same operation bypressing 0to 9on the remote control.4 Push MULTI-CONTROL left or right tomove the cursor to the previous or next po-sition.#Up to 24 digits can be entered.5 When you finish entering the number,press MULTI-CONTROL.Call confirmation appears.#You can also perform the same operation bypressing thumb pad on the remote control.6 Press MULTI-CONTROL again to make acall.#You can also perform the same operation bypressing on the remote control.7 To end the call, press .#You can also perform the same operation bypressing on the remote control.Clearing memory1 Display the function menu.Refer to Introduction to advanced operationson page 37.2 Use MULTI-CONTROL to selectCLR MEMO.3 Push MULTI-CONTROL up or down toselect an item.PH BOOK (phone book)—ALL (delete allmemory)—PRESET (preset phone numbers)—RECENT (call history)#If you want to clear the entire Phone Book,call history list and preset phone number, selectALL.4 Push MULTI-CONTROL right to deter-mine the item that you want to deletefrom this unit.CLEAR MEMORY YES is displayed. Clearingmemory is now on standby.#If you do not want to clear the memory thatyou have selected, push MULTI-CONTROL left.The display reverts to normal.5 Press MULTI-CONTROL to clear thememory.CLEARED is displayed and data on the se-lected item is cleared from this unit’s memory.Changing the phone bookdisplay order1 Display the function menu.Refer to Introduction to advanced operationson page 37.2 Use MULTI-CONTROL to selectPH. B. NAME VIEW.INVERT NAMES YES is displayed.3 Press MULTI-CONTROL to change thename view order.INVERTED is displayed.Operating this unitEn40Section02
Pressing MULTI-CONTROL repeatedlychanges the name view order between firstand last name.Selecting menu languageMenu language related to Bluetooth audio/tel-ephone can be changed.!Some characters may not be displayedproperly.1 Display the function menu.Refer to Introduction to advanced operationson page 37.2 Use MULTI-CONTROL to select MENU.3 Press MULTI-CONTROL to select the lan-guage.ENGLISH (English)—ESPANOL (Spanish)Operating this unitEn 41Section02Operating this unit
Introduction of audioadjustments1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to select AUDIO.Turn to change the menu option. Press to se-lect.The audio menu is displayed.3 Turn MULTI-CONTROL to select theaudio function.Turn MULTI-CONTROL to switch between theaudio functions in the following order.FADER (balance adjustment)—P. E Q (equali-zer recall)—EQ (equalizer adjustment)—EQ(equalizer fine adjustment)—LOUDNESS(loudness)—SUB W1 (subwoofer on/off set-ting)—SUB W2 (subwoofer setting)—HPF(high pass filter)—BASS BOOST (bass boost)—SLA (source level adjustment)#You can select the SUB W2 only when sub-woofer output is turned on in SUB W1.#When selecting FM as the source, you cannotswitch to SLA.#You can also select the audio function bypressing AUDIO on the remote control.#To return to the display of each source, pressBAND/ESC.#If you do not operate functions within about30 seconds, the display automatically returns tothe ordinary display.Using balance adjustmentYou can change the fader/balance setting sothat it can provide the ideal listening environ-ment in all occupied seats.1 Display the audio menu.Refer to Introduction of audio adjustments onthis page.2 Use MULTI-CONTROL to select FADER.#If the balance setting has been previously ad-justed, BALANCE will be displayed.3 Push MULTI-CONTROL up or down toadjust front/rear speaker balance.Each time MULTI-CONTROL is pushed up ordown, the front/rear speaker balance movestowards the front or rear.FADER :F15 to FADER :R15 is displayed as thefront/rear speaker balance moves from front torear.#FADER :F/R 0 is the proper setting when onlytwo speakers are used.#When the rear output setting is SUB W, youcannot adjust front/rear speaker balance. Refer toSetting the rear output and subwoofer controlleron page 47.4 Push MULTI-CONTROL left or right toadjust left/right speaker balance.Each time MULTI-CONTROL is pushed left orright, the left/right speaker balance moves to-wards the left or right.BALANCE :L15 to BALANCE :R15 is displayedas the left/right speaker balance moves fromleft to right.Using the equalizerThe equalizer lets you adjust the equalizationto match the car’s interior acoustic character-istics as desired.Recalling equalizer curvesThere are six stored equalizer curves whichyou can easily recall at any time. Here is a listof the equalizer curves.Display Equalizer curvePOWERFUL PowerfulNATURAL NaturalVOCAL VocalCUSTOM CustomFLAT FlatSUPER BASS Super bassAudio AdjustmentsEn42Section03
!CUSTOM is an adjusted equalizer curvethat you create. If you make adjustments toan equalizer curve, the equalizer curve set-ting is memorized in CUSTOM.!When FLAT is selected, no supplement orcorrection is made to the sound. This isuseful to check the effect of the equalizercurves by switching alternatively betweenFLAT and a set equalizer curve.1 Use MULTI-CONTROL to select P. EQ.POWERFUL appears in the display.If the equalizer curve has been previously se-lected, the curve of that previously selectedwill be displayed instead of POWERFUL.2 Push MULTI-CONTROL left or right toselect an equalizer curve.Each time MULTI-CONTROL is pushed left orright, equalizer curves are selected in the fol-lowing order:POWERFUL—NATURAL—VOCAL—CUSTOM—FLAT—SUPER BASSAdjusting equalizer curvesThe factory supplied equalizer curves can beadjusted to a fine degree (nuance control).1 Recall the equalizer curve you want toadjust.See Recalling equalizer curves on the previouspage.2 Push MULTI-CONTROL left or right toselect the equalizer band to adjust.EQ-LOW (low)—EQ-MID (mid)—EQ-HI (high)3 Push MULTI-CONTROL up or down toadjust the equalizer curve.+6 to –6is displayed as the equalizer curve isincreased or decreased.Fine-adjusting equalizer curveYou can adjust the center frequency and the Qfactor (curve characteristics) of each currentlyselected curve band (EQ-LOW/EQ-MID/EQ-HI).Level (dB)Center frequencyQ=2N Q=2WFrequency (Hz)1 Use MULTI-CONTROL to select EQ.2 Push MULTI-CONTROL left or right toselect a desired frequency.Low: 40HZ—80HZ—100HZ—160HZMid: 200HZ—500HZ—1KHZ—2KHZHigh: 3KHZ—8KHZ—10KHZ—12KHZ3 Push MULTI-CONTROL up or down toselect the desired Q factor.Q factor2N—1N—1W—2WAdjusting loudnessLoudness compensates for deficiencies in thelow- and high-sound ranges at low volume.1 Display the audio menu.Refer to Introduction of audio adjustments onthe previous page.2 Use MULTI-CONTROL to selectLOUDNESS.3 Press MULTI-CONTROL to turn loudnesson.Loudness level (e.g., MID) appears in the dis-play.#To turn loudness off, press MULTI-CONTROLagain.Audio AdjustmentsEn 43Section03Audio Adjustments
4 Push MULTI-CONTROL left or right toselect a desired level.Each time MULTI-CONTROL is pushed left orright, level is selected in the following order:LOW (low)—MID (mid)—HIGH (high)Using subwoofer outputThis unit is equipped with a subwoofer outputwhich can be turned on or off.Also, phase can be selected between normaland reverse.1 Display the audio menu.Refer to Introduction of audio adjustments onpage 42.2 Use MULTI-CONTROL to select SUB W1.3 Press MULTI-CONTROL to turn subwoo-fer output on.NORMAL appears in the display. Subwooferoutput is now on.#To turn subwoofer output off, pressMULTI-CONTROL again.4 Push MULTI-CONTROL left or right toselect the phase of subwoofer output.Push MULTI-CONTROL left to select reversephase and REV appears in the display. PushMULTI-CONTROL right to select normal phaseand NORMAL appears in the display.Adjusting subwoofer settingsWhen the subwoofer output is on, you can ad-just the cut-off frequency and the output levelof the subwoofer.!When the subwoofer output is on, you canselect SUB W2.1 Display the audio menu.Refer to Introduction of audio adjustments onpage 42.2 Use MULTI-CONTROL to select SUB W2.3 Push MULTI-CONTROL left or right toselect cut-off frequency.Each time MULTI-CONTROL is pushed left orright, cut-off frequencies are selected in thefollowing order:50—63—80—100—1254 Push MULTI-CONTROL up or down toadjust the output level of the subwoofer.Each time MULTI-CONTROL is pushed up ordown, subwoofer level increases or decreases.+6 to –24 is displayed as the level is increasedor decreased.Using the high pass filterWhen you do not want low sounds from thesubwoofer output frequency range to playfrom the front or rear speakers, turn on theHPF (high pass filter). Only frequencies higherthan those in the selected range are outputfrom the front or rear speakers.1 Display the audio menu.Refer to Introduction of audio adjustments onpage 42.2 Use MULTI-CONTROL to select HPF.3 Press MULTI-CONTROL to turn highpass filter on.80HZ appears in the display. High pass filter isnow on.#If the high pass filter has been previously ad-justed, the frequency of that previously selectedwill be displayed instead of 80HZ.#To turn high pass filter off, pressMULTI-CONTROL again.4 Push MULTI-CONTROL left or right toselect cut-off frequency.Each time MULTI-CONTROL is pushed left orright, cut-off frequencies are selected in thefollowing order:50HZ—63HZ—80HZ—100HZ—125HZAudio AdjustmentsEn44Section03
Boosting the bassBass boost function boosts the bass level ofsound.1 Display the audio menu.Refer to Introduction of audio adjustments onpage 42.2 Use MULTI-CONTROL to selectBASS BOOST.3 Push MULTI-CONTROL up or down toselect a desired level.0to +6 is displayed as the level is increased ordecreased.Adjusting source levelsSource level adjustment (SLA) lets you adjustthe volume level of each source to prevent ra-dical changes in volume when switching be-tween sources.!Settings are based on the FM volume level,which remains unchanged.1 Compare the FM volume level with thelevel of the source you wish to adjust.2 Display the audio menu.Refer to Introduction of audio adjustments onpage 42.3 Use MULTI-CONTROL to select SLA.4 Push MULTI-CONTROL up or down toadjust the source volume.Each time MULTI-CONTROL is pushed up ordown, source volume increases or decreases.+4 to –4is displayed as the source volume isincreased or decreased.Notes!The AM volume level can also be adjustedwith source level adjustments.!The built-in CD player and the multi-CD playerare set to the same source level adjustmentvolume automatically.!External unit 1 and external unit 2 are set tothe same source level adjustment volumeautomatically.Audio AdjustmentsEn 45Section03Audio Adjustments
Adjusting initial settings1 Press SRC and hold until the unit turnsoff.2 Press MULTI-CONTROL and hold untilthe initial setting menu appears in the dis-play.3 Turn MULTI-CONTROL to select one ofthe initial settings.CLNDR (calendar)—CLOCK (clock)—WARNING (warning tone)—AUX1 (auxiliaryinput 1)—AUX2 (auxiliary input 2)—REAR SP(rear output and subwoofer controller)—TEL(telephone muting/attenuation)—BUILT-IN AMP (power amp setting)—EVERSCROLL (ever scroll)—BT AUDIO (Blue-tooth audio)—PIN CODE INPUT (pin codeinput)—EDIT DEVICE NAME (device nameedit)—BT INFO (Bluetooth version informa-tion)—BT RESET:MEMORY (Bluetooth reset)—SOFTWARE UPDATE (software update)#You can also select the function by pressingFUNCTION on the remote control.#To cancel initial settings, press BAND/ESC.Setting the dateThe calender display adjusted in this mode ap-pears when the telephone source is selectedor sources and the feature demo are off.1 Display the initial setting menu.Refer to Adjusting initial settings on this page.2 Use MULTI-CONTROL to select CLNDR.CLNDR appears in the display.3 Push MULTI-CONTROL left or right toselect the segment of the calendar displayyou wish to set.Day—Month—YearAs you select segments of the calendar dis-play the segment selected will blink.4 Push MULTI-CONTROL up or down toset the date.Pushing MULTI-CONTROL up will increasethe selected day, month or year. PushingMULTI-CONTROL down will decrease the se-lected day, month or year.Setting the clockUse these instructions to set the clock.1 Display the initial setting menu.Refer to Adjusting initial settings on this page.2 Use MULTI-CONTROL to select CLOCK.3 Push MULTI-CONTROL left or right toselect the segment of the clock display youwish to set.Hour—MinuteAs you select segments of the clock display,the selected segment blinks.4 Push MULTI-CONTROL up or down toput a clock right.NoteYou can match the clock to a time signal bypressing MULTI-CONTROL.!If 00 to 29, the minutes are rounded down.(e.g., 10:18 becomes 10:00.)!If 30 to 59, the minutes are rounded up. (e.g.,10:36 becomes 11:00.)Switching the warning toneIf the front panel is not detached from thehead unit within four seconds of turning offthe ignition, a warning tone sounds. You canturn off the warning tone.1 Display the initial setting menu.Refer to Adjusting initial settings on this page.2 Use MULTI-CONTROL to selectWARNING.Initial SettingsEn46Section04
3 Press MULTI-CONTROL to turn warningtone on.#To turn warning tone off, pressMULTI-CONTROL again.Switching the auxiliary settingAuxiliary devices connected to this unit can beactivated individually. Set each AUX source toON when using. For more information aboutconnecting or using auxiliary devices, refer toUsing the AUX source on page 51.1 Display the initial setting menu.Refer to Adjusting initial settings on the pre-vious page.2 Use MULTI-CONTROL to select AUX1/AUX2.3 Press MULTI-CONTROL to turn AUX1/AUX2 on.#To turn AUX off, press MULTI-CONTROLagain.Setting the rear output andsubwoofer controllerThis unit’s rear output (rear speaker leads out-put) can be used for full-range speaker (FULL)or subwoofer (SUB W) connection. If youswitch the rear output setting to SUB W, youcan connect a rear speaker lead directly to asubwoofer without using an auxiliary amp.Initially, the unit is set for rear full-range speak-er connection (FULL).1 Display the initial setting menu.Refer to Adjusting initial settings on the pre-vious page.2 Use MULTI-CONTROL to select REAR SP.3 Press MULTI-CONTROL to switch therear output setting.Pressing MULTI-CONTROL will switch be-tween FULL (full-range speaker) and SUB W(subwoofer) and that status will be displayed.#When no subwoofer is connected to the rearoutput, select FULL (full-range speaker).#When a subwoofer is connected to the rearoutput, select SUB W (subwoofer).Notes!Even if you change this setting, there is nooutput unless you turn the subwoofer outputon (refer to Using subwoofer output on page44).!If you change this setting, subwoofer outputin the audio menu return to the factorysettings.Switching the soundmuting/attenuationSound from this system is muted or attenu-ated automatically when the signal from theequipment with mute function is received.!The sound is muted or attenuated, MUTEor ATT ON are displayed and no audio ad-justment is possible.!Sound from this system returns to normalwhen the muting or attenuation is can-celed.1 Display the initial setting menu.Refer to Adjusting initial settings on the pre-vious page.2 Use MULTI-CONTROL to select TEL.3 Press MULTI-CONTROL to switch the tel-ephone muting/attenuation.Pressing MULTI-CONTROL will switch be-tween ATT (attenuation) and MUTE (muting)and that status will be displayed.Initial SettingsEn 47Section04Initial Settings
Setting the internal poweramplifierThis unit features high power amplifier. How-ever, in particular system, external amplifiersare used instead of internal amplifier. If youuse external amplifiers in order to establish amulti-amp system, and don’t use internal am-plifier, it is recommended to turn off the inter-nal amplifier. Turning off internal amplifierreduces the noise that comes from the beha-vior of internal amplifier.!For this function, verify the topic Adjustinginitial settings before initiating the opera-tion.1 Display the initial setting menu.2 Use MULTI-CONTROL to selectBUILT-IN AMP.3 Press MULTI-CONTROL to turn the inter-nal power amplifier on.#To turn the internal power amplifier off, pressMULTI-CONTROL again.Switching the ever scrollWhen Ever Scroll is set to ON, recorded text in-formation scrolls continuously in the display.Set to OFF if you prefer the information toscroll just once.1 Display the initial setting menu.Refer to Adjusting initial settings on page 46.2 Use MULTI-CONTROL to selectEVERSCROLL.3 Press MULTI-CONTROL to turn the everscroll on.#To turn the Ever Scroll off, pressMULTI-CONTROL again.Activating the BT AUDIO sourceYou need to activate the BT AUDIO source inorder to use a Bluetooth audio player.1 Display the initial setting menu.Refer to Adjusting initial settings on page 46.2 Use MULTI-CONTROL to selectBT AUDIO.3 Press MULTI-CONTROL to turn theBT AUDIO source on.#To turn the BT AUDIO source off, pressMULTI-CONTROL again.Entering PIN code forBluetooth wireless connectionTo connect your cellular phone to this unit viaBluetooth wireless technology, you need toenter PIN code on your phone to verify theconnection. The default code is 0000, but youcan change this in this function.!With some Bluetooth audio players, youmay be required to enter the Bluetoothaudio player PIN code in advance to setthis unit for a connection.1 Display the initial setting menu.Refer to Adjusting initial settings on page 46.2 Use MULTI-CONTROL to selectPIN CODE INPUT.3 Push MULTI-CONTROL up or down toselect a number.4 Push MULTI-CONTROL left or right tomove the cursor to the previous or next po-sition.5 After inputting PIN code (up to 16 di-gits), press MULTI-CONTROL.PIN code can be stored in memory.When you press MULTI-CONTROL again onthe same display, the PIN code you entered isstored in this unit.Initial SettingsEn48Section04
#Pushing MULTI-CONTROL right in the confir-mation display returns you to the PIN code inputdisplay, and you can change the PIN code.Editing device nameYou can edit the device name.The device name is set to PIONEER FLAP BTas default.1 Display the initial setting menu.Refer to Adjusting initial settings on page 46.2 Use MULTI-CONTROL to selectEDIT DEVICE NAME.3 Press DISP to select the desired charac-ter type.Press DISP repeatedly to switch between thefollowing character types:Alphabet—Numbers4 Push MULTI-CONTROL up or down toselect a letter of the alphabet.5 Push MULTI-CONTROL left or right tomove the cursor to the previous or nextcharacter position.6 Move the cursor to the last position bypushing MULTI-CONTROL right after enter-ing the device name.Push MULTI-CONTROL right again to storethe device name in memory temporarily.#Pressing MULTI-CONTROL can also store thedevice name in memory temporarily. In this meth-od, cursor doesn’t need to be the last position.#If an invalid character has been entered, sub-sequent characters are not displayed.#If an invalid character has been entered in thebeginning, device name cannot be stored inmemory.Displaying system versionfor repairShould this unit fails to operate properly andyou consult your dealer for repair, you may beasked to indicate the system versions of thisunit and of Bluetooth module. You can displaythe versions and confirm them.1 Display the initial setting menu.Refer to Adjusting initial settings on page 46.2 Use MULTI-CONTROL to select BT INFO.The system (microprocessor) version of thisunit is displayed.3 Push MULTI-CONTROL left to switch tothe version of the Bluetooth module of thisunit.#Pushing MULTI-CONTROL right returns to thesystem version of this unit.Resetting the Bluetoothwireless technology moduleBluetooth telephone and Bluetooth Audiodata can be deleted. To protect personal infor-mation, we recommend deleting this data be-fore transferring the unit to other persons. Thefollowing settings will be deleted.—phone book entries on the Bluetooth tele-phone—preset numbers on the Bluetooth tele-phone—registration assignment of Bluetooth tele-phone—call history of Bluetooth telephone—history of the most recently connectedBluetooth audio1 Display the initial setting menu.Refer to Adjusting initial settings on page 46.2 Use MULTI-CONTROL to selectBT RESET:MEMORY.Initial SettingsEn 49Section04Initial Settings
3 Push MULTI-CONTROL right to show aconfirmation display.BT RESET:YES is displayed. Clearing memoryis now on standby.#If you do not want to reset phone memory,press BAND/ESC.4 Press MULTI-CONTROL to clear thememory.Updating the software aboutBluetooth connectionThis function is used to update this unit withthe latest software. For about software and up-dating, refer to our website.1 Display the initial setting menu.Refer to Adjusting initial settings on page 46.2 Use MULTI-CONTROL to selectSOFTWARE UPDATE.3 Push MULTI-CONTROL up or down toselect a appropriate group.4 Press MULTI-CONTROL to display thedata transfer mode.#To finish the updating, follow the on-screen in-structions.Initial SettingsEn50Section04
Using the AUX sourceUp to two auxiliary devices such as VCR orportable devices (sold separately) can be con-nected to this unit. When connected, auxiliarydevices are automatically read as AUX sourcesand assigned to AUX1 or AUX2. The relation-ship between AUX1 and AUX2 sources is ex-plained below.About AUX1 and AUX2There are two methods to connect auxiliary de-vices to this unit.AUX1 source:When connecting auxiliary device using a stereomini plug cable%Insert the stereo mini plug into theinput jack on this unit.For more details, refer to the installation man-ual.This auxiliary device is automatically set toAUX1.AUX2 source:When connecting auxiliary device using an IP-BUS-RCA Interconnector (sold separately)%Use an IP-BUS-RCA Interconnector suchas the CD-RB20/CD-RB10 (sold separetely)to connect this unit to auxiliary device fea-turing RCA output.For more details, refer to the IP-BUS-RCA Inter-connector owner’s manual.This auxiliary device is automatically set toAUX2.#You can only make this type of connection ifthe auxiliary device has RCA outputs.Selecting AUX as the source%Press SRC to select AUX as the source.#If the auxiliary setting is not turned on, AUXcannot be selected. For more details, see Switch-ing the auxiliary setting on page 47.Setting the AUX titleThe title displayed for the AUX1 or AUX2source can be changed.1 After you have selected AUX as thesource, use MULTI-CONTROL and selectFUNCTION to display TITLE INPUT.2 Enter a title in the same way as thebuilt-in CD player.For details concerning operation, refer to En-tering disc titles on page 20.Using the external unitExternal unit refers to a Pioneer product (suchas ones available in the future) that, althoughincompatible as a source, enables control ofbasic functions with this unit. Two externalunits can be controlled with this unit. Whentwo external units are connected, the externalunit is automatically allocated to external unit1 or external unit 2 by this unit.Basic operations of the external unit are ex-plained below. Allocated functions are differ-ent depending on the connected external unit.For details concerning functions, refer to exter-nal unit’s owner’s manual.Selecting the external unit asthe source%Press SRC to select EXTERNAL as thesource.Other FunctionsEn 51Section05Other Functions
Basic operationFunctions allocated to the following opera-tions are different depending on the con-nected external unit. For details concerningfunctions, refer to the connected externalunit’s owner’s manual.%Press BAND/ESC.%Press and hold BAND/ESC.%Push MULTI-CONTROL left or right.%Push and hold MULTI-CONTROL left orright.%Push MULTI-CONTROL up or down.Advanced operations1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectFUNCTION.Turn to change the menu option. Press to se-lect.3 Turn MULTI-CONTROL to select thefunction.FUNC1 (function 1)—FUNC2 (function 2)—FUNC3 (function 3)—FUNC4 (function 4)—AUTO/MANUAL (auto/manual)NoteTo return to the ordinary display, pressBAND/ESC.Turning the clock displayon or offYou can turn the clock display on or off.!Even when the sources and the featuredemo are off, the clock display appears onthe display.%Press CLOCK to turn the clock displayon or off.Each press of CLOCK turns the clock displayon or off.#The clock display disappears temporarilywhen you perform other operations, but the clockdisplay appears again after 25 seconds.Switching the displayindication and buttonilluminationDisplay indication and button illumination canbe switched on or off.%Press and hold DISP OFF.Pressing and holding DISP OFF switches thedisplay indication and button illumination onor off.#While the display indication is turned off,CLOCK/DISP OFF button lights up.#Even if the display indication is turned off, op-eration can be conducted. If operation is con-ducted while the display indication is off, displaywill light up for a few seconds and then turn offagain.Using the PGM buttonYou can operate the preprogrammed functionsfor each source by using PGM on the remotecontrol.The remote control CD-R510 is sold separately.%Press PGM to turn pause on when se-lecting the following sources:!COMPACT DISC –Built-in CD player!USB –USB portable audio player/USBmemory!IPOD –iPod!MULTI CD –Multi-CD player!BT AUDIO –Bluetooth audio player!DVD –DVD player/multi-DVD player#To turn pause off, press PGM again.Other FunctionsEn52Section05
%Press PGM and hold to turn BSM onwhen selecting tuner or HD Radio as thesource.Press PGM and hold until the BSM turns on.#To cancel the storage process, press PGMagain.%Press PGM and hold to turn BSSM onwhen selecting television as the source.Press PGM and hold until the BSSM turns on.#To cancel the storage process, press PGMagain.%Press PGM to turn FUNC1 (function 1)on when selecting external unit as thesource.#To turn FUNC1 (function 1), press PGM again.#Function allocated FUNC1 (function 1) is dif-ferent depending on the connected externalunit.Other FunctionsEn 53Section05Other Functions
Playing songs on iPodBasic operationYou can use this unit to control an interfaceadapter for iPod, which is sold separately.%Fast forward or reversePush and hold MULTI-CONTROL left or right.%Select a trackPush MULTI-CONTROL left or right.Notes!Read the precautions for iPod on page 74.!While iPod is connected to this unit, PIONEER(or (check mark)) is displayed on the iPod.!If an error message is displayed, refer to Errormessages on page 69.!When the ignition switch is set to ACC or ON,the iPod’s battery is charged while the iPod isconnected to this unit.!While the iPod is connected to this unit, theiPod cannot be turned on or off.!Before connecting the dock connector of thisunit to the iPod, disconnect the headphonesfrom the iPod.!The iPod is turned off about two minutes afterthe ignition switch is set to OFF.Displaying text information oniPodThe operation is the same as that of the iPodconnected to USB interface of this unit. (Referto Displaying text information on iPod on page23.)Browsing for a songThe operation is the same as that of the iPodconnected to USB interface of this unit. (Referto Browsing for a song on page 22.)However, the selectable categories are slightlydifferent. Selectable categories arePLAYLISTS (playlists)—ARTISTS (artists)—ALBUMS (albums)—SONGS (songs)—GENRES (genres)Introduction to advancedoperations1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectFUNCTION.Turn to change the menu option. Press to se-lect.The function menu is displayed.3 Turn MULTI-CONTROL to select thefunction.REPEAT (repeat play)—SHUFFLE (shuffle)—PAUSE (pause)Function and operationREPEAT and PAUSE operations are basicallythe same as that of the built-in CD player.Function name OperationREPEATRefer to Selecting a repeat playrange on page 18.However, the repeat play rangesyou can select are different fromthat of the built-in CD player. Therepeat play ranges of the iPod are:!ONE –Repeat the currentsong!ALL –Repeat all songs in theselected listPAUSE Refer to Pausing playback on page19.Notes!You can also select the function by pressingFUNCTION on the remote control.!To return to the ordinary display, pressBAND/ESC.!If you do not operate functions within about30 seconds, the display automatically returnsto the ordinary display.Available accessoriesEn54Section06
Playing songs in a randomorder (shuffle)%Press repeatedly to select the de-sired setting.!SONGS –Play back songs in the selectedlist in random order.!ALBUMS –Play back songs from a ran-domly selected album in order.!OFF –Cancel random play.#To turn shuffle off, press again.NoteYou can also perform this operation in the menuthat appears by using MULTI-CONTROL.XM tunerListening to XM Satellite RadioYou can use this unit to control an XM satellitedigital tuner (GEX-P920XM), which is soldseparately.For details concerning operation, refer to theXM tuner’s operation manuals. This sectionprovides information on XM operations withthis unit which differs from that described inthe XM tuner’s operation manual.!With this unit, you can operate two addi-tional functions: XM channel direct selec-tion and preset channel list.%Select an XM band.Press BAND/ESC.#Band can be selected from XM1,XM2 orXM3.%Select a channel.Push MULTI-CONTROL left or right.#If you push and hold MULTI-CONTROL left orright, you can increase or decrease channel num-ber continuously.#You can also perform tuning from a desiredchannel category. (Refer to Selecting a channel inthe channel category on the next page.)Selecting an XM channel directlyWhen using the remote control, you can selectthe XM channel directly by entering the de-sired channel number.1 Press DIRECT.Channel number input display appears.2 Press 0 to 9 to enter the desired channelnumber.#You can cancel the input number by pressingCLEAR.3 Press DIRECT.The XM channel of entered number isselected.#After entering the number input mode, if youdo not perform an operation within about eightseconds, the mode is automatically canceled.Switching the XM display%Press DISP to switch the XM display.#You can scroll the text information to the leftby pressing and holding DISP.Storing and recalling broadcaststationsYou can easily store up to six broadcast sta-tions for later recall.!Six stations for each band can be stored inmemory.1 Press LIST.Preset screen is displayed.2 Use MULTI-CONTROL to store the se-lected station in memory.Turn to change the preset number. Press andhold to store.The XM preset number you have selected willflash and then remain lit. The selected stationhas been stored in memory.3 Use MULTI-CONTROL to select the de-sired station.Turn to change the station; press to select.Available accessoriesEn 55Section06Available accessories
#You can also change the station by pushingMULTI-CONTROL up or down.#If you do not operate the list within about 30seconds, the display is automatically returned tothe ordinary display.Using the remote control%When you find a station that you wantto store in memory, press one of presettuning buttons 1 to 6 and hold until theXM preset number stops flashing.The number you have pressed will flash in theXM preset number indicator and then remainlit. The selected station has been stored inmemory.The next time you press the same preset tun-ing button the station is recalled from mem-ory.#You can also recall stations assigned to presettuning numbers by pushing MULTI-CONTROL upor down.Switching the XM channelselect modeYou have two methods for selecting a channel:by number and by category. When selectingby number, channels in any category can beselected. Select by category to narrow yoursearch down to only channels in a particularcategory.%Press SAT MODE repeatedly to selectthe desired channel select setting.CH NUMBER (channel number select setting)—CATEGORY (channel category selectsetting)NoteYou can also perform this operation in the menuthat appears by using MULTI-CONTROL.Selecting a channel in the channelcategory1 Select the channel select settings toCATEGORY.Refer to Switching the XM channel select modeon this page.2 Push MULTI-CONTROL up or down toselect the desired channel category.3 Push MULTI-CONTROL left or right toselect the desired channel in the selectedchannel category.Displaying the Radio IDChannel number select setting1 Select the channel select settings toCH NUMBER.Refer to Switching the XM channel select modeon this page.2 Push MULTI-CONTROL left or right toselect RADIO ID.#If you select another channel, display of the IDcode is canceled.#Display of the ID code repeats displayingRADIO ID and the ID code one after the other.SIRIUS Satellite Radio tunerListening to SIRIUS Satellite RadioYou can use this unit to control a SIRIUS Satel-lite Radio tuner, which is sold separately.When the SIRIUS tuner is used together withthis unit, some operations differ slightly fromthose described in the SIRIUS operation man-ual. This manual provides information onthese points. For all other information onusing the SIRIUS tuner, please refer to the SIR-IUS operation manual.%Select a SIRIUS band.Press BAND/ESC.#Band can be selected from SR1,SR2 or SR3.Available accessoriesEn56Section06
%Select a channel.Push MULTI-CONTROL left or right.#If you push and hold MULTI-CONTROL left orright, you can increase or decrease channel num-ber continuously.#You can also perform tuning from a desiredchannel category. (Refer to Selecting a channel inthe channel category on the next page.)NoteIt may take a few seconds before you can hearanything while this unit acquires and processesthe satellite signal when you change the sourceto SIRIUS tuner or select a channel.Selecting a SIRIUS channel directlyWhen using the remote control, you can selectthe SIRIUS channel directly by entering the de-sired channel number.1 Press DIRECT.Channel number input display appears.2 Press 0 to 9 to enter the desired channelnumber.#You can cancel the input number by pressingCLEAR.3 Press DIRECT.The SIRIUS channel of entered number isselected.#After entering the number input mode, if youdo not perform an operation within about eightseconds, the mode is automatically canceled.Switching the SIRIUS display%Press DISP to switch the SIRIUS display.Each press of DISP changes the SIRIUS dis-play in the following order:Play time—Channel number—Channel name—Category name—Artist name—Song title/program title—Composer name#Play time is displayed during the Instant Re-play mode. Refer to Using Instant Replay functionon page 59.#Play time display indicates the time invertedfrom the live broadcast. Play time is displayed innegative number.Storing and recalling broadcaststationsYou can easily store up to six broadcast sta-tions for later recall.!Six stations for each band can be stored inmemory.%When you find a station that you wantto store in memory press one of preset tun-ing buttons 1 to 6 and hold until the SIRIUSpreset number stops flashing.The number you have pressed will flash in theSIRIUS preset number indicator and then re-main lit. The selected station has been storedin memory.The next time you press the same preset tun-ing button the station is recalled from mem-ory.#You can also recall stations assigned to presettuning numbers by pushing MULTI-CONTROL upor down.Introduction of advancedoperations1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectFUNCTION.The function selection menu is displayed.Turn to change the menu option. Press toselect.3 Turn MULTI-CONTROL to select thefunction.MODE (channel select mode setting)—GAME ALERT (game alert setting)—TEAM SETTING (team setting)—GAME INFO(game info)—PAUSE (pause)Available accessoriesEn 57Section06Available accessories
Notes!You can also select the function by pressingFUNCTION on the remote control.!To return to the ordinary display, pressBAND/ESC.!If you do not operate functions within about30 seconds, the display is automatically re-turned to the ordinary display.!During the Instant Replay mode, you can se-lect PAUSE (pause). Refer to Using Instant Re-play function on the next page.!PAUSE is the same as that of the built-in CDplayer. (Refer to Pausing playback on page 19.)Selecting the SIRIUS channelselect modeYou have two methods for selecting a channel:by number and by category. When selectingby number, channels in any category can beselected. Select by category to narrow yoursearch down to only channels in a particularcategory.%Press SAT MODE repeatedly to selectthe desired channel select setting.CH NUMBER (channel number select setting)—CATEGORY (channel category selectsetting)NoteYou can also perform this operation in the menuthat appears by using MULTI-CONTROL.Selecting a channel in the channelcategory1 Select the channel select settings toCATEGORY.Refer to Selecting the SIRIUS channel selectmode on this page.2 Push MULTI-CONTROL up or down toselect the desired channel category.3 Push MULTI-CONTROL left or right toselect the desired channel in the selectedchannel category.Using the Game Alert functionOnly when SIR-PNR2/SIR-PNR2C is connectedto this unit, you can operate this function.This system can alert you when games invol-ving your favorite teams are about to start. Touse this function you need in advance to setup a game alert for the teams.Selecting teams for Game Alert1 Display the function selection menu.Refer to Introduction of advanced operations onthe previous page.2 Use MULTI-CONTROL to selectTEAM SETTING in the function menu.3 Push MULTI-CONTROL left or right toselect a desired league.League names are switched in the display.4 Push MULTI-CONTROL up or down toselect a desired team.Teams in the selected category are switched inthe display.5 Press MULTI-CONTROL to store the se-lected team in memory.The game alert function will start on thatteam.#To turn the Game Alert off of the selectedteam, press MULTI-CONTROL again.#When you have already made 12 team selec-tions, FULL is displayed and additional team se-lection is not possible. In this case, first deletethe team selection and then try again.6 Repeat these steps for selecting otherteams.Up to 12 teams can be selected.Available accessoriesEn58Section06
Switching the Game Alert on or offOnce you made team selections, you need toturn the Game Alert function on.!The Game Alert function is on at the defaultsetting.1 Display the function selection menu.Refer to Introduction of advanced operations onpage 57.2 Use MULTI-CONTROL to selectGAME ALERT in the function menu.3 Press MULTI-CONTROL to turn theGame Alert on.The Game Alert function is now on.#To turn the Game Alert function off, pressMULTI-CONTROL again.When the game of the selected teamstartsWhen a game of the selected team is about tostart (or is currently playing) on a different sta-tion, GAME ALERT is displayed. Press andhold MULTI-CONTROL to switch to that sta-tion, and you can listen to that game.!If you do not operate the function withinabout 10 seconds, the display is automati-cally returned.Displaying game informationIf games of your selected teams are currentlyplaying, you can display information of thegames and tune to the broadcast channel.You can display information of the gameswhile enjoying the sound from currently tun-ing station. You can also tune to the broadcastchannel when you wish to.1 Display the function selection menu.Refer to Introduction of advanced operations onpage 57.2 Use MULTI-CONTROL to selectGAME INFO in the function menu.The game information of your selected team isdisplayed.3 Push MULTI-CONTROL up or down toselect a game.The game is displayed, followed by more de-tailed game information.!Game score will be updated automatically.4 Press MULTI-CONTROL to switch to thatstation to listen to the game.Notes!If you have not made any team selections,NOT SET is displayed.!When games involving your favorite teams arenot currently playing, NO GAME is displayed.Displaying the Radio IDIf you select CH 000, the ID code is displayed.%Push MULTI-CONTROL left or right toselect CH 000.NoteTo select CH 000, set the channel select setting toCH NUMBER. About the channel select setting,refer to Selecting the SIRIUS channel select modeon the previous page.Using Instant Replay functionFollowing functions can be operated duringthe Instant Replay mode.!To use this function, Pioneer SIRIUS bus in-terface (e.g. CD-SB10) is required.!To use this function, SIRIUS plug-and-playunit with Instant Replay Function is re-quired.!For details, refer to SIRIUS plug-and-playunit’s manuals.%Performing the Instant Replay modeWhen SIRIUS tuner is selected as the source,press and hold SAT MODE.#In the following conditions, tuner exits fromthe Instant Replay mode.—When BAND/ESC is pressed—When another source is selectedAvailable accessoriesEn 59Section06Available accessories
%Select a trackPush MULTI-CONTROL left or right.%Fast forward or reversePush and hold MULTI-CONTROL left or rightfor about one second and release.HD Radio tunerBasic OperationsYou can use this unit to control an HD Radiotuner (GEX-P10HD), which is sold separately.For details concerning operation, refer to theHD Radio’s operation manual.%Select a bandPress BAND/ESC.#Band can be selected from among FM1,FM2,FM3 or AM.%Manual tuning (step by step)Push MULTI-CONTROL left or right.%Seek tuningPush and hold MULTI-CONTROL left or right,and then release.#You can cancel seek tuning by pushingMULTI-CONTROL left or right.Storing and recalling broadcastfrequenciesYou can easily store up to six broadcast fre-quencies for later recall.!Six stations for each band can be stored inmemory.1 Press LIST.Preset screen is displayed.2 Use MULTI-CONTROL to store the se-lected frequency in memory.Turn to change the preset number. Press andhold to store.3 Use MULTI-CONTROL to select the de-sired station.Turn to change the station. Press to select.#You can also change the station by pushingMULTI-CONTROL up or down.#To return to the ordinary display, pressBAND/ESC or LIST.#If you do not operate the list within about 30seconds, the display automatically returns to theordinary display.Using the remote control%When you find a frequency that youwant to store in memory, press one of pre-set tuning buttons 1 to 6 and hold until thepreset number stops flashing.The number you have pressed will flash in thepreset number indicator and then remain lit.The selected radio station frequency has beenstored in memory.The next time you press the same preset tun-ing button the radio station frequency is re-called from memory.#You can also recall radio station frequenciesassigned to preset tuning numbers by pushingMULTI-CONTROL up or down during the fre-quency display.Switching the displayDesired information can be displayed.%Press DISP.Press DISP repeatedly to switch between thefollowing settings:Frequency or station name—song title—artistname—program type#Only when the tuner has been tuned in to anHD Radio broadcasting, display can be changed.#When the tuner has been tuned in to an HDRadio broadcasting, default display is changedinto station name instead of frequency.Available accessoriesEn60Section06
Introduction to advancedoperations1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectFUNCTION.Turn to change the menu option. Press to se-lect.The function menu is displayed.3 Turn MULTI-CONTROL to select thefunction.BSM (best stations memory)—LOCAL (localseek tuning)—SEEK MODE (seek mode)—BLENDING (reception mode)Function and operationBSM and LOCAL operations are basically thesame as that of the tuner.Function name OperationBSM Refer to Storing the strongestbroadcast frequencies on page 15.LOCAL Refer to Tuning in strong signalson page 16.Notes!You can also select the function by pressingFUNCTION on the remote control.!To return to the playback display, pressBAND/ESC.Switching the seek modeThere are two method of seek tuning settings,one is HD (Digital broadcasting stations seek)and the other is ALL (normal seek).1 Display the function menu.Refer to Introduction to advanced operationson this page.2 Use MULTI-CONTROL to selectSEEK MODE in the function menu.3 Press MULTI-CONTROL to select your fa-vorite setting.ALL—HDSwitching the reception modeIf a digital broadcast reception condition getspoor, this unit automatically switches to theanalog broadcast of the same frequency level.If this function is set to on, the tuner switchesbetween digital broadcast and analog broad-cast automatically. If this function is off, recep-tion will be conducted within an analogbroadcast.1 Display the function menu.Refer to Introduction to advanced operationson this page.2 Use MULTI-CONTROL to selectBLENDING in the function menu.3 Press MULTI-CONTROL to select your fa-vorite setting.ON—OFFMulti-CD PlayerBasic OperationsYou can use this unit to control a multi-CDplayer, which is sold separately.!Only functions described in this manual aresupported by 50-disc multi-CD players.!This unit is not designed to operate disc titlelist functions with a 50-disc multi-CD player.For information about the disc title list func-tions, refer to Selecting discs from the disctitle list on page 65.%Select a discPush MULTI-CONTROL up or down.#You can also select a disc by using 1to 6but-tons on the remote control.!For discs 1 to 6, press the correspondingbutton number.Available accessoriesEn 61Section06Available accessories
!For discs 7 to 12, press and hold the corre-sponding numbers, such as 1for disc 7,until the disc number appears in the dis-play.%Fast forward or reversePush and hold MULTI-CONTROL left or right.%Select a trackPush MULTI-CONTROL left or right.Notes!When multi-CD player completes preparatoryoperations, READY is displayed.!If an error message is displayed, refer to themulti-CD player owner’s manual.!If there are no discs in the multi-CD player ma-gazine, NO DISC is displayed.Using CD TEXT functionsYou can use these functions only with a CDTEXT compatible multi-CD player.The operation is the same as that of the built-in CD player.Refer to Displaying text information on disc onpage 17.Selecting a track directlyThe operation is the same as that of the built-in CD player.Refer to Selecting a track directly on page 17.Introduction to advancedoperationsYou can only use COMP/DBE (compressionand DBE) with a multi-CD player that supportsthem.1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL to selectFUNCTION.Turn to change the menu option. Press to se-lect.The function menu is displayed.3 Turn MULTI-CONTROL to select thefunction.REPEAT (repeat play)—RANDOM (randomplay)—SCAN (scan play)—PAUSE (pause)—COMP/DBE (compression and DBE)—ITS PLAY (ITS play)—ITS MEMORY (ITS pro-gramming)—TITLE INPUT (disc title input)#If you do not operate functions other thanITS MEMORY and TITLE INPUT within about 30seconds, the display automatically returns to theordinary display.#When playing a CD TEXT disc on a CD TEXTcompatible multi-CD player, you cannot switch toTITLE INPUT. The disc title is already recorded onthe CD TEXT disc.Function and operationREPEAT,RANDOM,SCAN,PAUSE,COMP/DBE and TITLE INPUT operations arebasically the same as that of the built-in CDplayer.Function name OperationREPEATRefer to Selecting a repeat playrange on page 18.However, the repeat play rangesyou can select are different fromthat of the built-in CD player. Therepeat play ranges of the multi-CDplayer are:!MCD –Repeat all discs in themulti-CD player!TRACK –Repeat just the cur-rent track!DISC –Repeat the current discRANDOM Refer to Playing tracks in randomorder on page 19.SCAN Refer to Scanning folders andtracks on page 19.Available accessoriesEn62Section06
PAUSE Refer to Pausing playback on page19.TITLE INPUT Refer to Entering disc titles onpage 20.Notes!You can also select the function by pressingFUNCTION on the remote control.!To return to the playback display, pressBAND/ESC.!If you select other discs during repeat play,the repeat play range changes to MCD.!If you perform track search or fast forward/re-verse during TRACK, the repeat play rangechanges to DISC.!After track or disc scanning is finished, nor-mal playback of the tracks begins again.Using compression and bassemphasisYou can only use these functions with a multi-CD player that supports them.COMP (compression) and DBE (dynamic bassemphasis) functions lets you adjust the soundplayback quality of the multi-CD player.1 Display the function menu.Refer to Introduction to advanced operationson the previous page.2 Use MULTI-CONTROL to selectCOMP/DBE in the function menu.#If the multi-CD player does not supportCOMP/DBE, NO COMP is displayed when you at-tempt to select it.3 Press MULTI-CONTROL to select your fa-vorite setting.OFF—COMP 1—COMP 2—OFF—DBE 1—DBE 2Using ITS playlistsITS (instant track selection) lets you make aplaylist of favorite tracks from the multi-CDplayer magazine. After you have added your fa-vorite tracks to the playlist, you can turn on ITSplay and play just those selections.You can use ITS to enter and play back up to99 tracks per disc from up to 100 discs (withthe disc titles). (With multi-CD players sold be-fore the CDX-P1250 and CDX-P650, up to 24tracks can be stored in the playlist.)Creating a playlist with ITS programming1 Play a CD that you want to program.Push MULTI-CONTROL up or down to selectthe CD.2 Display the function menu.Refer to Introduction to advanced operationson the previous page.3 Use MULTI-CONTROL to selectITS MEMORY in the function menu.4 Select the desired track by pushingMULTI-CONTROL left or right.5 Push MULTI-CONTROL up to store thecurrently playing track in the playlist.MEMORY COMPLETE is displayed and thecurrently playing selection is added to yourplaylist.6 Press BAND/ESC to return to the play-back display.NoteAfter data for 100 discs is stored in memory, datafor a new disc will overwrite the oldest one.Playback from your ITS playlistITS play lets you listen to the tracks that youhave entered into your ITS playlist. When youturn on ITS play, tracks from your ITS playlistin the multi-CD player begin to play.1 Select the repeat range.Refer to Playing tracks in random order onpage 19.Available accessoriesEn 63Section06Available accessories
2 Display the function menu.Refer to Introduction to advanced operationson page 62.3 Use MULTI-CONTROL to select ITS PLAYin the function menu.4 Press MULTI-CONTROL to turn ITS playon.ITS PLAY: ON appears in the display. Playbackbegins of those tracks from your playlist withinthe previously selected MCD or DISC ranges.#If no tracks in the current range are pro-grammed for ITS play, then ITS PLAY: EMPTY isdisplayed.#To turn ITS play off, press MULTI-CONTROLagain.Erasing a track from your ITS playlistYou can delete a track from your ITS playlist ifITS play is on.If ITS play is already on, skip to step 2. If ITSplay is off, use MULTI-CONTROL.1 Play the CD with the track you want todelete from your ITS playlist, and turn ITSplay on.Refer to Playback from your ITS playlist on theprevious page.2 Display the function menu.Refer to Introduction to advanced operationson page 62.3 Use MULTI-CONTROL to selectITS MEMORY in the function menu.4 Select the desired track by pushingMULTI-CONTROL left or right.5 Push MULTI-CONTROL down to erasethe track from your ITS playlist.The currently playing selection is erased fromyour ITS playlist and playback of the next trackbegins.6 Press BAND/ESC to return to the play-back display.Erasing a CD from your ITS playlistYou can delete all tracks of a CD from your ITSplaylist if ITS play is off.1 Play the CD that you want to delete.Push MULTI-CONTROL up or down to selectthe CD.2 Display the function menu.Refer to Introduction to advanced operationson page 62.3 Use MULTI-CONTROL to selectITS MEMORY in the function menu.4 Push MULTI-CONTROL down to eraseall tracks on the currently playing CD fromyour ITS playlist.All tracks on the currently playing CD are de-leted from your playlist andMEMORY DELETED is displayed.5 Press BAND/ESC to return to the play-back display.Using disc title functionsYou can input CD titles and display the titles.Then, you can easily search for and play a de-sired disc.Entering disc titlesUse the disc title input feature to store up to100 CD titles (with ITS playlist) into the multi-CD player. Each title can be up to 10 charac-ters long.For details concerning operation, refer to En-tering disc titles on page 20.!Titles remain in the memory even after thedisc is removed from the magazine, andare recalled when the disc is reinserted.!After data for 100 discs is stored in mem-ory, data for a new disc will overwrite theoldest one.Available accessoriesEn64Section06
Displaying disc titlesYou can display the text information of anydisc that has the disc title entered.The operation is the same as that of the built-in CD player.Refer to Displaying text information on disc onpage 17.Selecting discs from the disc title listDisc title list lets you see the list of disc titlesentered in the multi-CD player and select oneof them to play back.1 Press LIST to switch to the disc title listmode during the playback display.2 Use MULTI-CONTROL to select the de-sired disc title.Turn to change the disc title. Press to play.#You can also change the disc title by pushingMULTI-CONTROL up or down.#When playing CD TEXT disc, pushMULTI-CONTROL right to see a list of the tracksin the selected disc. Push MULTI-CONTROL leftto return to the disc list.#If no title is entered for a disc, NO DISC TITLEis displayed.#NO DISC is displayed next to the disc numberwhen there is no disc in the magazine.#If you do not operate the list within about 30seconds, the display automatically returns to theordinary display.DVD PlayerBasic OperationsYou can use this unit to control a DVD player ormulti-DVD player, which is sold separately.For details concerning operation, refer to theDVD player’s or multi-DVD player’s operationmanual. This section provides information onDVD operations with this unit which differsfrom that described in the DVD player’sormulti-DVD player’s operation manual.%Select a chapter/trackPush MULTI-CONTROL left or right.%Fast forward or reversePush and hold MULTI-CONTROL left or right.#When playing compressed audio, there is nosound on fast forward or reverse.%To skip back or forward to anotherchapter/track, push MULTI-CONTROL left orright.Selecting a disc!You can operate this function only when amulti-DVD player is connected to this unit.%Press any of 1 to 6 on the remote con-trol to select the desired disc.Selecting a folder!You can operate this function only when aDVD player compatible with compressedaudio playback is connected to this unit.%Push MULTI-CONTROL up or down toselect a folder.Introduction to advancedoperations1 Press MULTI-CONTROL to display themain menu.Available accessoriesEn 65Section06Available accessories
2 Use MULTI-CONTROL to selectFUNCTION.The function menu is displayed.Turn to change the menu option. Press to se-lect.3 Turn MULTI-CONTROL to select thefunction.During DVD video or Video CD playbackREPEAT (repeat play)—PAUSE (pause)During CD playbackREPEAT (repeat play)—RANDOM (randomplay)—SCAN (scan play)—PAUSE (pause)—ITS PLAY (ITS play)—ITS MEMO (ITS input)—TITLE INPUT (disc title input)During compressed audio playbackREPEAT (repeat play)—RANDOM (randomplay)—SCAN (scan play)—PAUSE (pause)#To return to the playback display, pressBAND/ESC.#If you do not operate functions except forITS MEMO and TITLE INPUT within about 30 sec-onds, the display is automatically returned to theordinary display.Function and operationREPEAT,RANDOM,SCAN,PAUSE andTITLE INPUT operations are basically thesame as that of the built-in CD player.Also, ITS PLAY and ITS MEMO operations arebasically the same as that the multi-CD player.Function name OperationREPEATRefer to Selecting a repeat playrange on page 18.But the repeat play range that youcan select is vary depending onthe type of disc or system. The re-peat play ranges of the DVDplayer/multi-DVD player are asbelow:During PBC playback of VideoCDs, this function cannot be oper-ated.!DISC –Repeat the current disc!FOLDER –Repeat the currentfolder!TITLE –Repeat just the currenttitle!CHAP –Repeat just the cur-rent chapter!TRACK –Repeat the currenttrackRANDOM Refer to Playing tracks in randomorder on page 19.SCAN Refer to Scanning folders andtracks on page 19.PAUSE Refer to Pausing playback on page19.ITS PLAY Refer to Using ITS playlists onpage 63.ITS MEMO Refer to Using ITS playlists onpage 63.TITLE INPUT Refer to Entering disc titles onpage 20.Notes!You can also select the function by pressingFUNCTION on the remote control.!To return to the playback display, pressBAND/ESC.!If you select other discs during repeat play,the repeat play range changes to DISC.!When playing back Video CD or CD, if you per-form track search or fast forward/reverse dur-ing TRACK, the repeat play range changes toDISC.Available accessoriesEn66Section06
!When playing back compressed audio, if youselect another folder during repeat play, therepeat play range changes to DISC.!When playing back compressed audio, if youperform track search or fast forward/reverseduring TRACK, the repeat play range changesto FOLDER.!Multi-DVD player that has ITS functions anddisc title functions can also be connected tothis unit. In this case, ITS PLAY,ITS MEMOand disc title input can be controlled.!The ITS function of a DVD player differsslightly from ITS playback with a multi-CDplayer. With multi-DVD player, ITS playback ap-plies only to the CD playing. For details, referto Using ITS playlists on page 63.TV tunerBasic OperationsYou can use this unit to control a TV tuner,which is sold separately.For details concerning operation, refer to theTV tuner’s operation manual. This section pro-vides information on TV operations with thisunit, which differs from that described in theTV tuner’s operation manual.%Select a bandPress BAND/ESC.%Select a channel (step by step)Push MULTI-CONTROL left or right.%Seek tuningPush and hold MULTI-CONTROL left or right,and then release.Notes!Band can be selected from TV-1 or TV-2.!You can cancel seek tuning by pushingMULTI-CONTROL left or right.!While pushing and holding MULTI-CONTROLleft or right, you can skip stations. Seek tuningstarts as soon as you releaseMULTI-CONTROL.Storing and recalling broadcaststationsYou can easily store up to 12 broadcast sta-tions for later recall.!12 stations for each band can be stored inmemory.1 Press LIST.Preset screen is displayed.2 Use MULTI-CONTROL to store the se-lected station in memory.Turn to change the preset number. Press andhold to store.3 Use MULTI-CONTROL to select the de-sired station.Turn to change the station. Press to select.#You can also change the station by pushingMULTI-CONTROL up or down.#If you do not operate the list within about 30seconds, the display automatically returns to theordinary display.Using the remote controlYou can also store and recall stations assignedto preset tuning numbers P1to P6by usingthe remote control.%When you find a station that you wantto store in memory, press one of presettuning buttons 1 to 6 and hold until thepreset number stops flashing.The number you have pressed will flash in thepreset number indicator and then remain lit.The selected station has been stored in mem-ory.The next time you press the same preset tun-ing button the station is recalled from mem-ory.#You can also recall stations assigned to presettuning numbers by pushing MULTI-CONTROL upor down during the channel display.Available accessoriesEn 67Section06Available accessories
Storing the strongest broadcaststations sequentially1 Press MULTI-CONTROL to display themain menu.2 Use MULTI-CONTROL and selectFUNCTION to display BSSM.3 Press MULTI-CONTROL to turn BSSMon.SEARCH begins to flash. While SEARCH isflashing, the 12 strongest broadcast stationsare stored in order from the lowest channelup. When finished, the preset channel list ap-pears.#To cancel the storage process, pressMULTI-CONTROL again.4 Use MULTI-CONTROL to select the de-sired station.Turn to change the station. Press to select.#You can also change the station by pushingMULTI-CONTROL up or down.#You can also select the function by pressingFUNCTION on the remote control.#To return to the ordinary display, pressBAND/ESC.#If you do not operate the list within about 30seconds, the display automatically returns to theordinary display.Available accessoriesEn68Section06
TroubleshootingBluetooth audio/telephoneSymptom Cause ActionThe audio ofthe Bluetoothaudio source isnot playedback.A Bluetooth-con-nected cellularphone is cur-rently in a phonecall.The audio will beplayed back whenthe call is com-pleted.A Bluetooth-con-nected cellularphone is cur-rently in opera-tion.Do not operate thecellular phone atthis time.A call was madewith a Bluetooth-connected cellu-lar phone andthen immediatelyterminated. As aresult, communi-cation betweenthis unit and thecellular phonewas not termi-nated properly.Reconnect theBluetooth connec-tion between thisunit and the cellu-lar phone.Error messagesWhen you contact your dealer or your nearestPioneer Service Center, be sure to have theerror message recorded.Built-in CD PlayerMessage Cause ActionERROR-11, 12,17, 30Dirty disc Clean disc.ERROR-11, 12,17, 30Scratched disc Replace disc.ERROR-10, 11,12, 15, 17, 30,A0Electrical or me-chanicalTurn the ignitionswitch OFF andback ON, or switchto a differentsource, then backto the CD player.ERROR-15 The inserted discdoes not containany dataReplace disc.ERROR-22, 23The CD formatcannot be playedbackReplace disc.NO AUDIO The inserted discdoes not containany files that canbe played backReplace disc.TRK SKIPPED The inserted disccontains WMAfiles that are pro-tected by DRMReplace disc.PROTECT All the files onthe inserted discare secured byDRMReplace disc.USB audio player/USB memoryMessage Cause ActionNO AUDIO No songs Transfer the audiofiles to the USBportable audioplayer/USB mem-ory and connect.USB memorywith security en-abled is con-nectedFollow the USBmemory instruc-tions to disable thesecurity.No songs Transfer the songsto iPod.TRK SKIPPED The connectedUSB portableaudio player/USB memorycontains WMAfiles that are pro-tected byWindows MediaDRM 9/10Play an audio filenot protected byWindows MediaDRM 9/10.PROTECT All the files onthe connectedUSB portableaudio player/USB memory areprotected byWindows MediaDRM 9/10Transfer audio filesnot protected byWindows MediaDRM 9/10 to theUSB portableaudio player/USBmemory and con-nect.N/A USB The USB deviceconnected to isnot supported bythis unit.Connect a USBportable audioplayer or USBmemory that isUSB Mass StorageClass compliant.Additional InformationEn 69AppendixAdditional Information
CHECK USBThe USB connec-tor or USB cableis short-circuited.Confirm that theUSB connector orUSB cable is notcaught in some-thing or damaged.The connectedUSB portableaudio player/USB memoryconsumes morethan 500 mA(maximum allow-able current).Disconnect theUSB portableaudio player/USBmemory and donot use it. Turn theignition switch toOFF, then to ACCor ON and thenconnect the com-pliant USB porta-ble audio player/USB memory.ERROR-19 CommunicationfailurePerform one of thefollowing opera-tions.-Turn the ignitionswitch OFF andback ON.-Disconnect theUSB portableaudio player/USBmemory.-Change to a differ-ent source.Then, return to theUSB portableaudio player/USBmemory.ERROR-23 USB device isnot formattedwith FAT16 orFAT32USB device shouldbe formatted withFAT16 or FAT32.iPodMessage Cause ActionERROR-19 CommunicationfailureDisconnect thecable from iPod.Once iPod mainmenu is displayed,connect the cableagain.Reset the iPod.iPod failure Disconnect thecable from iPod.Once iPod mainmenu is displayed,connect the cableagain.Reset the iPod.N/A USBOld version ofiPodUpdate the iPodversion.iPod failure Reset the iPod.ERROR-16 Old version ofiPodUpdate the iPodversion.iPod failure Disconnect thecable from iPod.Once iPod mainmenu is displayed,connect the cableagain.Reset the iPod.CHECK USB iPod is notcharged but op-erates correctlyCheck if the con-nection cable foriPod shorted out(e.g., not caught inmetal objects).After checking,turn the ignitionswitch OFF andback ON or discon-nect the iPod andconnect again.NO SONGS No songs Transfer the songsto iPod.STOP No songs in thecurrent listSelect a list thatcontains thesongs.Bluetooth audio/telephoneMessage Cause ActionERROR-10 Built-in Blue-tooth unit en-countered anerrorTurn the ignitionOFF and ON.ERROR-80 Built-in FLASHROM encoun-tered an errorTurn the ignitionOFF and ON.Additional InformationEn70Appendix
Handling guideline of discsand player!Use only discs featuring either of followingtwo logos.!Use only conventional, fully circular discs.Do not use shaped discs.!Use 12-cm or 8-cm CD. Do not use anadapter when playing 8-cm CDs.!Do not insert anything other than a CD intothe CD loading slot.!Do not use cracked, chipped, warped, orotherwise damaged discs as they may da-mage the player.!Unfinalized CD-R/CD-RW disc playback isnot possible.!Do not touch the recorded surface of thediscs.!Store discs in their cases when not in use.!Avoid leaving discs in excessively hot envir-onments including under direct sunlight.!Do not attach labels, write on or apply che-micals to the surface of the discs.!To clean a CD, wipe the disc with a softcloth outward from the center.!Condensation may temporarily impair theplayer’s performance. Leave it to adjust tothe warmer temperature for about onehour. Also, wipe any dump discs with a softcloth.!Playback of discs may not be possible be-cause of disc characteristics, disc format,recorded application, playback environ-ment, storage conditions, and so on.!Text information may not be correctly dis-played depending on the recorded environ-ment.!Road shocks may interrupt disc playback.!Read the precautions for discs beforeusing them.Dual Discs!Dual Discs are two-sided discs that have arecordable CD for audio on one side and arecordable DVD for video on the other.!Since the CD side of Dual Discs is not phy-sically compatible with the general CDstandard, it may not be possible to play theCD side with this unit.!Frequent loading and ejecting of a DualDisc may result in scratches on the disc.Serious scratches can lead to playback pro-blems on this unit. In some cases, a DualDisc may become stuck in the disc loadingslot and will not eject. To prevent this, werecommend you refrain from using DualDisc with this unit.!Please refer to the information from thedisc manufacturer for more detailed infor-mation about Dual Discs.Compressed audiocompatibilityWMA!Compatible format: WMA encoded byWindows Media Player!Bit rate: 48 kbps to 320 kbps (CBR), 48 kbpsto 384 kbps (VBR)!Sampling frequency: 32 kHz to 48 kHz!Windows Media Audio 9 Professional, Loss-less, Voice: NoMP3!Bit rate: 8 kbps to 320 kbps!Sampling frequency: 16 kHz to 48 kHz (32,44.1, 48 kHz for emphasis)!Compatible ID3 tag version: 1.0, 1.1, 2.2,2.3, 2.4 (ID3 tag Version 2.x is given prioritythan Version 1.x.)!M3u playlist: NoAdditional InformationEn 71AppendixAdditional Information
!MP3i (MP3 interactive), mp3 PRO: NoAAC!Compatible format: AAC encoded byiTunes®!Sampling frequency: 11.025 kHz to 48 kHz!Transmission rate: 16 kbps to 320 kbps!AAC file bought on the iTunes Store (.m4pfile extension): No!Apple Lossless: NoWAV!Compatible format: Linear PCM (LPCM),MS ADPCM!Quantization bits: 8 and 16 (LPCM), 4 (MSADPCM)!Sampling frequency: 16 kHz to 48 kHz(LPCM), 22.05 kHz to 44.1 kHz (MS AD-PCM)Compressed audio files onthe disc!Depending on the version of WindowsMedia Player used to encode WMA files,album names and other text informationmay not be correctly displayed.!There may be a slight delay when startingplayback of WMA/AAC files encoded withimage data.!ISO 9660 Level 1 and 2 compliant. Romeoand Joliet file systems are both compatiblewith this player.!Multi-session playback is possible.!Compressed audio files are not compatiblewith packet write data transfer.!Only 64 characters from the beginning canbe displayed as a file name (including theextension such as .wma, .mp3, .m4a or.wav) or a folder name.!Folder selection sequence or other opera-tion may be altered depending on the en-coding or writing software.!Regardless of the length of blank sectionbetween the songs of original recording,compressed audio discs play with a shortpause between songs.!File extensions such as .wma, .mp3, .m4aor .wav must be used properly.Example of a hierarchy: Folder: Compressed audio file123456Level 1 Level 2 Level 3 Level 4!This unit assigns folder numbers. The usercannot assign folder numbers.!Folder hierarchy is allowed up to eight tiers.However, a practical hierarchy of folder isless than two tiers.!Up to 99 folders on a disc can be playedback.USB audio player/USB memoryUSB audio player/USB memorycompatibility!USB version: 2.0, 1.1 and 1.0!USB data transfer rate: full speed!USB Class: MSC (Mass Storage Class) de-vice!Protocol: bulk!Minimum amount of memory: 250 MB!Maximum amount of memory: 250 GB!File system: FAT32 and FAT16!Supply current: 500 mAAdditional InformationEn72Appendix
Notes!Partitioned USB memory is not compatiblewith this unit.!Depending on the kind of USB portable audioplayer/USB memory you use, this unit maynot recognize the USB audio player/USBmemory or audio files may not be played backproperly.!This unit can play back files in the USB porta-ble audio player/USB memory that is USBMass Storage Class. However, copyright pro-tected files that are stored in above-mentionedUSB devices cannot be played back. (If theiPod is connected to this unit, file playbackcondition depends on the iPod specifications.)!You cannot connect a USB portable audioplayer/USB memory to this unit via a USBhub.Handling guideline andsupplemental information!Do not leave the USB portable audioplayer/USB memory in direct sunlight forextended amounts of time. Extended expo-sure to direct sunlight can result in USBportable audio player/USB memory mal-function due to the resulting high tempera-ture.!Do not leave the USB portable audioplayer/USB memory in high temperature.!Firmly secure the USB portable audioplayer/USB memory when driving. Do notlet the USB portable audio player/USBmemory fall onto the floor, where it may be-come jammed under the brake or accelera-tor pedal.!There may be a slight delay when startingplayback of audio files encoded with imagedata.!Depending on the USB devices connectedto this unit, it may generate noise in theradio.!Only 32 characters from the beginning canbe displayed as a file name (including theextension) or a folder name when USB por-table audio player/USB memory is selectedas a source.!The text information of some audio filesmay not be correctly displayed.!File extensions must be used properly.!Up to 15 000 files on a USB portable audioplayer/USB memory can be played back.!Up to 500 folders on a USB portable audioplayer/USB memory can be played back.!Up to eight tiers directory on a USB porta-ble audio player/USB memory can beplayed back.!There may be a slight delay when startingplayback of audio files on a USB portableaudio player/USB memory with numerousfolder hierarchies.!Do not connect anything other than theUSB portable audio player/USB memory.!Operations may vary depending on thekind of USB audio player and a USB mem-ory.The sequence of audio files on USBmemoryFor USB portable audio players, the sequence isdifferent from that of USB memory and de-pends on the player.Example of a hierarchy: Folder: Compressed audio file123456Level 1 Level 2 Level 3 Level 4Additional InformationEn 73AppendixAdditional Information
!01 to 05 represent assigned folder num-bers. 1to 6represent the playback se-quence. The user cannot assign foldernumbers and specify the playback se-quence with this unit.!Playback sequence of the audio file is thesame as recorded sequence in the USB de-vice.!To specify the playback sequence, the fol-lowing method is recommended.1 Create the file name including numbersthat specify the playback sequence (e.g.,001xxx.mp3 and 099yyy.mp3).2 Put those files into a folder.3 Record the folder containing files into theUSB device.However, depending on the system environ-ment, you cannot specify the file playbacksequence.iPodAbout handling the iPod!Do not leave the iPod in direct sunlight forextended amounts of time. Extended expo-sure to direct sunlight can result in iPodmalfunction due to the resulting high tem-perature.!Do not leave the iPod in a high tempera-ture.!Connect directly the dock connector cableto the iPod so that this unit works properly.!Firmly secure the iPod when driving. Donot let the iPod fall onto the floor, where itmay become jammed under the brake oraccelerator pedal.!For details, refer to the iPod’s manuals.About iPod settings!You cannot operate the iPod Equalizer onPioneer products. We recommend that youset the iPod Equalizer to off, before con-necting to this unit.!You cannot set Repeat to off on the iPodwhen using this unit. Even if you set Repeatto off on the iPod, Repeat is automaticallychanged to All when connecting the iPodto this unit.Bluetooth profiles!In order to use Bluetooth wireless technol-ogy, devices must be able to interpret cer-tain profiles. This unit is compatible withthe following profiles.—A2DP (Advanced Audio DistributionProfile)—AVRCP (Audio/Video Remote ControlProfile)—GAP (Generic Access Profile)—SDP (Service Discovery Protocol)—OPP (Object Push Profile)—HFP (Hands Free Profile)—PBAP (Phone Book Access Profile)—SPP (Serial Port Profile)Additional InformationEn74Appendix
SpecificationsGeneralPower source ............................. 14.4 V DC (10.8 V to 15.1 Vallowable)Grounding system ................... Negative typeMax. current consumption..................................................... 10.0 ADimensions (W × H × D):DINChassis ..................... 178 mm × 50 mm × 162mm(7 in. × 2 in. × 6-1/2 in.)Nose ........................... 188 mm × 58 mm × 15 mm(7-3/8 in.× 2-1/4 in.× 5/8 in.)DChassis ..................... 178 mm × 50 mm × 162mm(7 in.× 2 in.× 6-1/2 in.)Nose ........................... 170 mm × 46 mm × 15 mm(6-3/4 in.× 1-3/4 in.× 5/8 in.)Weight .......................................... 1.3 kg (2.9 lbs)AudioMaximum power output ....... 50 W × 450 W × 2/4 W+ 70 W × 1/2W(for subwoofer)Continuous power output ... 22 W × 4 (50 Hz to 15 000Hz, 5% THD, 4 Wload, bothchannels driven)Load impedance ...................... 4 Wto 8 W×44Wto 8 W×2+2W×1Preout max output level ....... 4.0 VEqualizer (3-Band Parametric Equalizer):LowFrequency ................ 40/80/100/160 HzQ Factor .................... 0.35/0.59/0.95/1.15 (+6 dBwhen boosted)Gain ............................ ±12 dBMidFrequency ................ 200/500/1k/2k HzQ Factor .................... 0.35/0.59/0.95/1.15 (+6 dBwhen boosted)Gain ............................ ±12 dBHighFrequency ................ 3.15k/8k/10k/12.5k HzQ Factor .................... 0.35/0.59/0.95/1.15 (+6 dBwhen boosted)Gain ............................ ±12 dBHPF:Frequency .......................... 50/63/80/100/125 HzSlope .................................... –12 dB/octSubwoofer (mono):Frequency .......................... 50/63/80/100/125 HzSlope .................................... –18 dB/octGain ...................................... +6 dB to –24 dBPhase .................................. Normal/ReverseBass boost:Gain ...................................... +12 dB to 0 dBCD playerSystem .......................................... Compact disc audio systemUsable discs .............................. Compact discSignal-to-noise ratio ............... 94 dB (1 kHz) (IEC-A net-work)Number of channels .............. 2 (stereo)MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2chaudio)(Windows Media Player)AAC decoding format ............ MPEG-4 AAC (iTunes®en-coded only) (.m4a)(Ver. 7.2 and earlier)WAV signal format .................. Linear PCM & MS ADPCM(Non-compressed)USBSpecification .............................. USB 2.0 full speedSupply current .......................... 500 mAMaximum amount of memory..................................................... 250 GBFile system .................................. FAT16, FAT32MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11 (2chaudio)(Windows Media Player)AAC decoding format ............ MPEG-4 AAC (iTunes®en-coded only) (.m4a)(Ver. 7.2 and earlier)WAV signal format .................. Linear PCM & MS ADPCM(Non-compressed)FM tunerFrequency range ...................... 87.9 MHz to 107.9 MHzUsable sensitivity ..................... 8 dBf (0.7 µV/75 W, mono,S/N: 30 dB)Signal-to-noise ratio ............... 75 dB (IEC -A network)AM tunerFrequency range ...................... 530 kHz to 1 710 kHz (10kHz)Usable sensitivity ..................... 18 µV (S/N: 20 dB)Signal-to-noise ratio ............... 65 dB (IEC -A network)BluetoothVersion .......................................... Bluetooth 2.0 certifiedAdditional InformationEn 75AppendixAdditional Information
CEA2006 SpecificationsPower output ............................. 14 W RMS × 4 Channels (4Wand ≦1 % THD+N)S/N ratio ....................................... 91 dBA (reference: 1 W into4W)NoteSpecifications and the design are subject to mod-ifications without notice due to improvements.Additional InformationEn76Appendix
En 77
En78
En 79
PIONEER CORPORATION4-1, MEGURO 1-CHOME, MEGURO-KUTOKYO 153-8654, JAPANPIONEER ELECTRONICS (USA) INC.P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.TEL: (800) 421-1404PIONEER EUROPE NVHaven 1087, Keetberglaan 1, B-9120 Melsele, BelgiumTEL: (0) 3/570.05.11PIONEER ELECTRONICS ASIACENTRE PTE. LTD.253 Alexandra Road, #04-01, Singapore 159936TEL: 65-6472-7555PIONEER ELECTRONICS AUSTRALIA PTY. LTD.178-184 Boundary Road, Braeside, Victoria 3195, AustraliaTEL: (03) 9586-6300PIONEER ELECTRONICS OF CANADA, INC.300 Allstate Parkway, Markham, Ontario L3R 0P2, CanadaTEL: 1-877-283-5901TEL: 905-479-4411PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.Blvd.Manuel Avila Camacho 138 10 pisoCol.Lomas de Chapultepec, Mexico, D.F. 11000TEL: 55-9178-4270先鋒股份有限公司總公司:台北市中山北路二段44號13樓電話: (02) 2521-3588先鋒電子（香港）有限公司香港九龍尖沙咀海港城世界商業中心9樓901-6室電話: (0852) 2848-6488Published by Pioneer Corporation.Copyright ©2007 by Pioneer Corporation.All rights reserved.<CRB2546-A/N> UC<KSNZX> <07L00000>

Navigation menu