Philips Consumer Lifestyle TSU9400 WLAN Remote Control User Manual TSU9600 SGEND ESF v03

Philips Consumer Lifestyle WLAN Remote Control TSU9600 SGEND ESF v03

Users Manual

TSU9400Starter’s GuideManual de inicioGuide de démarrageFRESENDRAFT
ENGLISHTSU9600 Starter’s GuideESPAÑOLFRANÇAISStarter’s GuideManual de inicioGuide de démarrageTSU9400Using the Control PanelUso del Panel de ControlUtilisation du panneau de commande
Getting to Know Your Pronto Control PanelYour TSU9400 Control Panel is designed and manufactured with great care to offer you a reliableand easy operation of your home theater system. It has been preprogrammed by your installer andcontains a so-called configuration file that contains all the codes, graphical buttons and navigationbehaviour.1TSU9600 Starter’s GuideTSU9400 Starter’s GuideContentsGetting to Know Your Pronto Control Panel......................................................................................1Taking a First Look........................................................................................................................2Charging the Control Panel............................................................................................................3Enjoying Your Pronto Control Panel..................................................................................................3Controlling Your Home Theater......................................................................................................3Changing the Pronto Settings ........................................................................................................5Support .............................................................................................................................................6Maintaining the Control Panel .......................................................................................................6Troubleshooting............................................................................................................................7Specifications...................................................................................................................................8IFU Approbation / Safety Content TSU9400.......................................................................................iFCC Compliancy ............................................................................................................................iRegulations According to R&TTE ....................................................................................................i
3TSU9400 Starter’s GuideCharging the Control PanelWhen the Battery level icon on your screen turns red, it is time to charge the Control Panel.Depending on how your installer has configured the Control Panel, it can be operated for one toseveral days.Note The lifetime of the battery depends on the timeout settings and the settings of the wirelessnetwork configured by your installer. If you notice that the battery is deteriorating, pleasecontact your installer.When you place the Control Panel in the docking station, the redCharging LED on the front of the docking station lights up.When the Charging LED fades out, the Control Panel is fullycharged. This can take 3 to 4 hours.When the battery is low and the Charging LED does not light up,make sure that:•the power switch at the bottom of the Control Panel is switched to 1.•the docking station is plugged in the wall outlet. When it is plugged in, the docking station glowsblue.•the Control Panel is placed properly in the docking station.•the connector in the docking station is clean and free of obstructions.Tip It is advised to place the Control Panel in the docking station after use. Even when the screen ofthe Control Panel turns black, the Control Panel is still using power.Enjoying Your Pronto Control PanelControlling Your Home TheaterActivating the screen of the Control Panel•Tap the touch screen with the stylus enclosed or with your finger.-Or-•Press the Backlight key.
5TSU9400 Starter’s GuideChanging the Pronto SettingsNote It is possible that your installer has blocked the access to the Settings pages. Normally, yourinstaller has fully programmed your Control Panel and no changes are required.To open the Settings pages:•Press and hold the Settings icon for more than 3 seconds.GeneralTip Press and hold the ‘-’ and ‘+’ buttons to increase or decrease the setting faster.On the Info Page you can find the version andnetwork information and memory status.The General volumerefers all the soundsyou hear when youoperate the ControlPanel.The Button volumespecifically refers tothe default sound youhear when you pressa button.Turning the Control Panel On/OffTip Always switch off the Control Panel during transport to avoid the activation of the touchscreenand battery draining.To change Date & Time settings1Tap the Month, Day, Year, or Timebutton.The button is highlighted.2Tap the ‘-’ and ‘+’ buttons toadjust the date or time.To change the Volume settings•Tap the ‘-’ and ‘+’ buttons toadjust the volume settings.To access the other Settings pages:•Tap the different tabs.Power switchThe Power switch on thebottom of the ControlPanel turns the ControlPanel on and off.
6TSU9400 Starter’s GuideENGLISHScreenNote The screen is calibrated in the factory. Do not use this function unless you experience problemswith the touch screen.SupportMaintaining the Control PanelTake care not to damage the touch screen•Do not drop the Control Panel or subject it to any strong impact.•Use the stylus enclosed or your finger to tap the touch screen.Attention Never use an actual pen, pencil or other sharp object on the touch screen to avoid scratchingthe touch screen.Protect the Control Panel from temperature extremesKeep the Control Panel away from heaters and other heat sources.The Control Panel is not waterproofThe Control Panel should not be exposed to rain or moisture.Do not store or use the Control Panel in any location that is extremely damp or wet.When you have spilled water on the Control Panel, you have to turn it off by switching the Powerswitch to 0. Place the Control Panel in a clean environment to dry.To change the Activation Settings:•Tap the buttons to togglebetween the different Activationsettings:Pick up sensor: the Control Panelswitches on when it is tilted.Firm keys: the Control Panelswitches on and/or sends out IRwhen a firm key is pressedCursor keys: the Control Panelswitches on and/or sends out IRwhen one of the cursor keys ispressed.To calibrate the touch screen:1Tap the Calibrate button.2Follow the on screen instructionsto tap the 4 corners of thescreen.The touch screen is calibrated.To change the Time out andthe Brightness settings:•Tap the ‘-’ and ‘+’ buttons to adjust the settings.To exit the Settings pages:•Press the rightfirm key labeledExit.
7TSU9400 Starter’s GuideCleaning the Control Panel•Use a soft, damp cloth to clean the Control Panel.•If the touch screen is dirty, clean it with a soft cloth moistened with a diluted window-cleaningsolution.•Do not use a corrosive detergent or an abrasive sponge.•Avoid the use of abundant water.TroubleshootingThe buttons on the touch screen of my Control Panel do not work properlyWhen you find that tapping a button activates one of the adjacent buttons, or when you have to tapnext to a button to activate it, it is advised to recalibrate the touch screen as described in‘Changing the Pronto Settings’ on page 8. Calibrating is a way of adjusting the touch screen to reobtain accuracy and reliability. The Control Panel goes to stand-by mode automaticallyThis is a time out feature of the Control Panel to save power. You can adjust the time that theControl Panel stays active in the Settings pages on the tab Screen, as described in ‘Changing thePronto Settings’ on page 8.My AV-equipment does not respond to commands from the Control Panel•Check the status of the battery on the screen. If the Battery level icon is red, recharge theControl Panel.•When your Control Panel works in a WiFi environment, bear in mind that it may take the networka few seconds to wake up and start transmitting codes.•You may be out of reach of the WiFi network. The WiFi activity icon that normally indicates theWiFi strenght changes into .Please refer to the next chapter. The WiFi activity icon shows no WiFi strengthNote The WiFi activity icon may not be visible on the screen, depending on the settings made byyour installer.If the Control Panel shows one of the following icons: My Control Panel runs out of power fast•When the Control Panel works in a WiFi environment, bear in mind that the Control Panel is stillusing power even when its screen is black. It is advised to place the Control Panel in the dockingstation each time after use.•When the battery runs out of power constantly, it may be time to replace the battery. Contactyour installer for more information.No connection•The Wireless Access Point is powered down•The Control Panel is out of range of the Wireless Access point•There is an encryption problemNo identification•There occurred an IP problem. If the problem comes up regularly, contact yourinstaller to change the settings.
8TSU9400 Starter’s GuideENGLISHSpecificationsDisplay 3.7” TFT color display with touch screenVGA (640 x 480 pixels) resolution landscape LCD65,536 colorsInfrared (IR) Operating distance = max. 36 ft (12 m)Operating angle = 45º at max 15 ft (5 m)Wireless System WiFi based technology operating at 2.4 GHzMemory 64 MB SDRAM64 MB NAND FlashPower Management Power on by tilting, tapping the screen, pressing the back light button ortapping the keysPower off automatically by time outBattery status indicationDimensions Control Panel: 6,2 x 3,9 x 1,3 inch (157 x 100 x 34 mm)Docking Station: 5,4 x 4,1 x 1,9 inch (137 x 103 x 49 mm)Operating Temperature 41° F – 113° F (5° C - 45° C)Storage temperature -13° F – 158° F (-25° C - 70° C)Battery Lithium ion battery, 2100 mAhPower Adapter 100V-240VAC / 50-60Hz Power adapter( 5 V DC / 2 A output)Accessories - Power adapter- Docking station- Starter’s Guide- Warranty certificatePronto Control Panel Starter’s Guide© Copyright 2006 Royal Philips Electronics, Interleuvenlaan 72 - 74, 3000 Leuven (Belgium)Remarks:All rights are reserved. Reproduction in whole or in part is prohibited without prior consent of the copyright owner.Royal Philips Electronics is not liable for omissions or for technical or editorial errors in this manual or for damagesdirectly or indirectly resulting from the use of the Pronto Control Panel.The information in this Starter’s Guide may be subject to change without prior notice. All brand or product names aretrademarks or registered trademarks of their respective companies or organizations.
FCC CompliancyThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:•This device may not cause harmful interference.•This device must accept any interference received, including interference that may cause undesiredoperation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant topart 15 of the FCC rule.These limits are designed to provide reasonable protection against harmful interference in residentialinstallations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipmentdoes cause harmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a different circuit from the receiver.•Consult the dealer or an experienced radio/TV technician for help.CAUTION The user changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.Notice for Canada / Remark pour le CanadaThis class B digital apparatus complies with Canadian ICES-003.Cet appareil numerique de la Classe B est conforme a la norme NMB-003 du CanadaRegulations According to R&TTEDeclarationHereby, Philips Consumer Electronics, BL Home Control declares that TSU9400 is in compliance with theessential requirements and other relevant provisions of Directive 1999/5/EC:•Radio: ETSI EN 300 328•EMC: ETSI EN 301 489-1, ETSI EN 301 489-17•Safety: EN60950-1Czech My, Philips Consumer Electronics, BL Home Control, prohlašujeme že výrobek TSU9600 splňuje základnípožadavky a ostatní příslušná ustanovení Směrnice 1999/5/EC.Danish Philips Consumer Electronics, BL Home Control, erklærer herved, at følgende udstyr TSU9600overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.Dutch Hierbij verklaart Philips Consumer Electronics, BL Home Control, dat deze TSU9600 inovereenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.Finnish Philips Consumer Electronics, BL Home Control, vakuuttaa täten että TSU9600 tyyppinen laite ondirektiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.French Par la présente Philips Consumer Electronics, BL Home Control, déclare que les appareils du typeTSU9600 sont conformes aux exigences essentielles et aux autres dispositions pertinentes de la directive1999/5/CE.German Hiermit erklärt Philips Consumer Electronics, BL Home Control, dass sich dieses Gerät (TSU9600) inÜbereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften derRichtlinie 1999/5/EG befindet". (BMWi).IFU Approbation / Safety Content TSU9400i

Navigation menu