Philips Consumer Lifestyle SHB9100 Bluetooth stereo headset User Manual Aug19

Philips Consumer Lifestyle Bluetooth stereo headset Aug19

User Manual Aug19

Register your product and get support atwww.philips.com/welcomeSHB9100EN User manual
3EnglishENAudio quality is poor and crackling noises can be heard. 13Audio quality is poor when streaming from the mobile phone is very slow, or audio streaming does not work at all. 14I hear but cannot control music on my device (e.g. skip forward/backward). 14Headset does not work when audio cable is connected. 14Restore the factory setting 14Contents1 Important 4Hearing Safety 4Electric-, Magnetic- and Electromagnetic Fields (EMF) 4General information 4Disposal of your old product 5Remove the integrated battery 5Notice for the European Union 5Notice for USA (FCC) 5Trademarks 62 Your bluetooth stereo headset 7Introduction 7What’s in the box 7What else you’ll need 7Compatibility 8Overview of your Bluetooth stereo headset 83 Get started 9Charge the headset 9Pair the headset with your mobile phone 94 Use the headset 10Connect the headset to a mobile phone 10Automatic power saving 10Use your headset 10Wear your headset 11Use with the audio cable 115 Technical data 126 Frequently asked questions 13Bluetooth headset does not switch on. 13No connection to a mobile phone. 13Pairing does not work. 13The mobile phone cannot nd the headset. 13Voice dialing or redialing does not work. 13The other side cannot hear me. 13The headset is connected to a Bluetooth stereo enabled mobile phone, but music will play on the mobile phone’s speaker only. 13Contents
42. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing products.3. Philips is committed to develop, produce and market products that cause no adverse health effects.4. Philips conrms that if its products are handled properly for their intended use, they are safe to use according to scientic evidence available today.5. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardization for early integration in its products.General informationTo avoid damage or malfunction:• Do not expose the headset to excessive heat.• Do not drop your headset.• Apparatus shall not be exposed to dripping or splashing.• Do not allow your headset to be submerged in water.• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.• If cleaning is required use a soft cloth, if necessary dampened with a minimum amount of water or diluted mild soap, to clean the product.About operating and storage temperatures• Do not operate or store in a place where temperature is below -15ºC (5ºF) or above 55ºC (131ºF) as this may shorten your battery life.• The integrated battery shall not be exposed to excessive heat such as sunshine, re or the like.1 ImportantHearing Safety DangerTo avoid hearing damage, limit the time you use the •headphones at high volume and set the volume to a safe level. The louder the volume, the shorter is the safe listening time.Be sure to observe the following guidelines when using your headphones.Listen at reasonable volumes for • reasonable periods of time.Be careful not to adjust the volume • continuously upwards as your hearing adapts.Do not turn up the volume so high that • you can’t hear what’s around you.You should use caution or temporarily • discontinue use in potentially hazardous situations.Excessive sound pressure from earphones • and headphones can cause hearing loss.Using this headset with both ears covered • while driving is not recommended and may be illegal in some areas while driving.For your safety, avoid distractions from • music or phone calls while in trafc or other potentially dangerous environments.Electric-, Magnetic- and Electromagnetic Fields (EMF)1. Royal Philips Electronics manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals.EN
5EnglishRemove the integrated batteryWarningMake sure the headset is disconnected from the USB •charging cable before removing the battery.If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headset. Notice for the European Union Hereby, Philips Consumer Lifestyle, BG Accessories, declares that this Philips Bluetooth stereo headset SHB9100 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Notice for USA (FCC)This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. 12 34Disposal of your old productYour product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC.Please inform yourself about the local separate collection system for electrical and electronic products.Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.Battery disposalYour product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health.EN
6TrademarksTrademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Koninklijke Philips Electronics N.V. is under license. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Relocate the receiving antenna.• Increase the separation between • equipment and receiver.Connect the equipment into an outlet on • a circuit different from that to which the receiver is connected.Consult the dealer or an experienced • radio/TV technician for help.WarningChanges or modications made to this equipment •not expressly approved by Philips may void the FCC authorization to operate this equipment.NoteFCC/IC Radiation Exposure Statement: This equipment •complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specic operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in •conjunction with any other antenna or transmitter.Philips Consumer LifestyleA division of Philips Electronics North America CorporationP.O.Box 10313Stamford, CT 06904Phone: 1-888-PHILIPS (744-5477)EN
7English Audio cable• Quick start guide• What else you’ll needA mobile phone that is capable of Bluetooth stereo streaming, i.e. that is compatible with the Bluetooth A2DP prole.Other devices (Notebooks, PDA’s, Bluetooth adapters, MP3 players etc.) are also compatible if they share the Bluetooth proles supported by the headsets. These proles are:For wireless Hands-Free communication:The Bluetooth Headset proles (HSP) or • the Bluetooth Hands-Free prole (HFP).For wireless stereo listening:The Bluetooth Advanced Audio • Distribution prole (A2DP).For wireless music control:The Bluetooth Audio Video Remote • Control prole (AVRCP).The headset features Bluetooth Version 2.1+EDR but will also work with devices featuring other Bluetooth versions that support the proles above.abcde2 Your bluetooth stereo headsetCongratulations on your purchase, and welcome to Philips! To fully benet from the support that Philips offers, register your product at www.philips.com/welcome.IntroductionWith the Philips Bluetooth stereo headset SHB9100, you can:Enjoy convenient wireless hands-free call• Enjoy and control wireless music• Switch between calls and music• Enjoy music on non-Bluetooth devices with • audio cableWhat’s in the box Philips • Bluetooth stereo headset SHB9100 USB charging cable• EN
8CompatibilityYour headset is compatible with Bluetooth enabled mobile phones. It features Bluetooth version 2.1+EDR. It also works with devices featuring other Bluetooth versions that support the Headset prole (HSP), Hands-Free prole (HFP), Advanced Audio Distribution prole (A2DP) and Audio/Video Remote Control prole (AVRCP).Overview of your Bluetooth stereo headset EN
9English3 Press and hold until the LED starts breathing white and blue alternately.The headset is in pairing mode, which »lasts ve minutes.4 Pair the headset with the mobile phone. For details, refer to the user manual of the mobile phone.A sample pairing is shown below.1 Under Bluetooth menu on the mobile phone, search for the headset.2 On mobile phones using Bluetooth 2.1+EDR or higher, you do not need to enter a pass code.3 From the found devices, select Philips SHB9100.Enter “• 0000” (4 zeros), if prompted to enter the pin code of the headset. SettingsSelectBackConnectivity10:37Enter Password****0000SettingsBluetoothSelectBackConnectivity10:35AddBluetoothdeviceSettingsDevices FoundSelectBack10:36Philips SHB6000SettingsSelectBackConnectivity10:37Enter Password****0000SettingsBluetoothSelectBackConnectivity10:35AddBluetoothdeviceSettingsDevices FoundSelectBack10:36Philips SHB91003 Get startedCharge the headsetWarningBefore you use your headset for the rst time, charge •the battery for four hours for optimum battery capacity and lifetime.Use only the original USB charging cable to avoid any •damage.Finish your call before charging the headset, as •connecting the headset for charging will power off the unit.You can operate the headset normally during charge. •Plug the headset into a powered USB port with USB charging cable.LED turns white during charge and »turns off when the headset is fully charged.TipTypically, a full charge takes three hours. •Pair the headset with your mobile phoneBefore you use the headset with a mobile phone for the rst time, pair it with the mobile phone. A successful pairing establishes a unique encrypted link between the headset and the mobile phone. The headset stores the last eight links in the memory. If you try to pair more than eight devices, the link for the earliest paired device is overwritten.1 Ensure that the mobile phone is turned on and its Bluetooth feature is activated.2 Ensure that the headset is charged and turned off.EN
10Turn the headset off.Press and hold for more than 4 seconds- 1 long beep- 1 long white ashPlay or pause music. Tap 1 short beepPick up or terminate a call. Tap 1 short beepReject a call. Hold 1 short beepRedial the last number.Double tap 1 short beepSwitch caller in a call.Double tap 1 long beepTransfer a call to your mobile phone. (This function is available if your mobile phone supports this feature.)Hold for more than 4 seconds1 long beepAdjust volume. Slide up and down VOL +/-1 short beepSkip forward. Tap 1 short beepSkip backward. Double tap 1 short beepMute/unmute the microphone in a call.Tap 1 short beep / 2 short beepsActivate voice dialingDouble tap 2 short beeps before dial toneOther status and indicatorsHeadset Status IndicatorThe headset is connected to a Bluetooth device, while the headset is in standby mode or while you are listening to music.Blue LED ashes every 8 seconds.The headset is ready for pairing.LED ashes whiteand bluealternately.4 Use the headsetConnect the headset to a mobile phone1 Turn on your mobile phone. 2 Press and hold to turn the headset on. The blue LED is on. »The headset is reconnected to the last »connected device automatically. If the last one is not available, the headset tries to reconnect to the penultimate connected device.NoteIf you turn the mobile phone on or its •Bluetooth feature after turning the headset on, connect the headset from the Bluetooth menu on your mobile phone.Automatic power savingIf the headset cannot nd any Bluetooth device to connect to in range within ve minutes, it powers down automatically to save the battery life.Use your headsetTask Operation Sound or LED IndicatorTurn the headset on.Press and hold for more than 4 seconds1 short beep- 3 white ashes: Battery low < 25%- 2 white ashes: Battery level < 50%- 1 blue ash: Battery level > 50%EN
11EnglishUse with the audio cableWith the supplied audio cable, you can use the headset with non-Bluetooth enabled devices or use the headset on airplane. No battery power is required when you use the headset with the audio cable. CautionFinish your call before connecting the audio cable, as •this will switch off battery power and end an incoming call.Connect the supplied audio cable tothe headset and;• a music device.• The headset is on but not connected to a Bluetooth device.Blue LED ashes fast.There is an incoming call. Blue LED ashes twice per second.Low battery. White LED ashes.Battery is fully charged. White LED is off.Wear your headsetAdjust the headband for the best t. TipAfter use, twist both earshells, fold the headset at for •storage.EN
125 Technical dataUp to 9 hours of play time or talk time• Up to 200 hours of standby time• Typical time for a full charge: 3 hours• Rechargeable Lithium-Polymer battery • (230 mAh)3.5 mm audio socket for corded headset • modeBluetooth 2.1+EDR, Bluetooth mono • support (Headset Prole - HSP, Hands-Free Prole - HFP), Bluetooth stereo supported (Advanced Audio Distribution Prole - A2DP; Audio Video Remote Control Prole - AVRCP)Operating range: Up to 15 meters (50 • feet)Adjustable, at-folding headband• Noise isolating slow recovery foam• Digital echo & noise reduction• Auto power off• Battery status check• Specications are subject to change without notice.EN
13EnglishPairings may have been reset or headset has been previously paired with other device.Pair the headset with the mobile phone • again as described in the user manual.Voice dialing or redialing does not work.Your mobile phone may not support this feature.The other side cannot hear me.The microphone is muted.Press • to enable the microphone.The headset is connected to a Bluetooth stereo enabled mobile phone, but music will play on the mobile phone’s speaker only.The mobile phone may have the option to listen to music via speaker or headset.Refer to the user manual of your • mobile phone on how to transfer the music to the headset.Audio quality is poor and crackling noises can be heard.The Bluetooth audio source is out of range.Reduce the distance between the headset • and the Bluetooth audio source, or remove obstacles between them.6 Frequently asked questionsBluetooth headset does not switch on.Battery is low.Charge the headset.• The audio cable is connected to the headset.Disconnect the audio cable.• No connection to a mobile phone.Bluetooth disabled.Enable the • Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headset.Pairing does not work.The headset is not in pairing mode.Follow the steps described in this user • manual. Ensure that the LED light ashes whiteand • blue alternately before you release . Do not stop holding the button after seeing the blue LED only.The mobile phone cannot nd the headset.The headset may be connected to another previously paired device.Turn the currently connected device off or • move it out of range.EN
14Audio quality is poor when streaming from the mobile phone is very slow, or audio streaming does not work at all.The mobile phone may only support (mono) HSP/HFP but not support A2DP. Refer to the user manual of the • mobile phone for detailed information on compatibility.I hear but cannot control music on my device (e.g. skip forward/backward).The Bluetooth audio source does not support AVRCP.Refer to the user manual of the audio • source for detailed information on compatibility.Headset does not work when audio cable is connected.Mic function will be deactivated if 3.5mm audio cable is connected to the headphone.In such case, the headphone is only • for music enjoyment.Restore the factory settingRestore all original headset setting.Press • and until the LED ashing white for 5 times sequentially. Please visit www.philips.com/welcome for further support.
Philips Consumer Lifestyle Philips Consumer Lifystyle AMB 544-9056 AQ95-56F-1300KR 2011 ........................................................ ........................................................................... (Report No. / Numéro du Rapport) (Year in which the CE mark is affixed / Année au cours de laquelle le marquage CE a été apposé) EC DECLARATION OF CONFORMITY(DECLARATION DE CONFORMITE CE) We / Nous, PHILIPS CONSUMER LIFESTYLE B.V. (Name / Nom de l’entreprise) TUSSENDIEPEN 4, 9206 AD DRACHTEN, THE NETHERLANDS (address / adresse) Declare under our responsibility that the electrical product(s): (Déclarons sous notre propre responsabilité que le(s) produit(s) électrique(s):) PHILIPS SHB6017, SHB6017/XX (where xx=00 to 99) ....................................................................... ........................................................... _(brand name, nom de la marque) (Type version or model, référence ou modèle) Bluetooth Stereo Headset .............................................................................................. (product description, description du produit) To which this declaration relates is in conformity with the following harmonized standards: (Auquel cette déclaration se rapporte, est conforme aux normes harmonisées suivantes) _(title, number and date of issue of the standard / titre, numéro et date de parution de la norme) EN 300 328 V1.7.1:2006EN 301 489-1 V1.8.1:2008; _EN 301 489-17 V1.3.2:2008EN 50371:2002EN 60950-1:2006/A11:2009Following the provisions of : (Conformément aux exigences essentielles et autres dispositions pertinentes de:) 1999/5/EC (R&TTE Directive) (Directive R&TTE 1999/5/CE) And are produced under a quality scheme at least in conformity with ISO 9001 or CENELEC Permanent Documents (Et sont fabriqués conformément à une qualité au moins conforme à la norme ISO 9001 ou aux Documents Permanents CENELEC) The Notified Body ............ ............................ performed ......... .......... ...............SGS 2150 ............................Notified Body Opinon (L’Organisme Notifié) (Name and number/ nom et numéro) (a effectué) (description of intervention / description de l’intervention) And issued the certificate, ...... ........................................ ...................ZD02H0004 (et a délivré le certificat) (certificate number / numéro du certificat)Remarks: (Remarques:) Drachten, The Netherlands, Jan. 03, 2011 A.Speelman, CL Compliance Manager ........................................................... ............................................................................................ (place,date / lieu, date) (signature, name and function / signature, nom et fonction)
© 2011 Koninklijke Philips Electronics N.V.All rights reserved.SHB9100_UM_00_V1.0

Navigation menu