Philips Consumer Lifestyle HF367X Wake-up Light User Manual Luxury A5 BW New branding 2015

Philips Consumer Lifestyle B.V. Wake-up Light Luxury A5 BW New branding 2015

UserManual.wiki >

Philips Consumer Lifestyle >

HF367X User Manual

Users Manual

Philips SleepMapper appHF367X series

3211413112765 39101184

English 6

EnglishIMPORTANT SAFETY INSTRUCTIONSRead and follow all instructions in this user manual and heed all warnings.WARNINGTo reduce the risk of burns, fire, electric shock, or injury to persons:-This appliance is for indoor use only.-If the adapter, cord or appliance has been damaged in any way, liquid has spilled or objectshave fallen into and/or onto the appliance, the appliance has been exposed to rain ormoisture, does not operate normally or has been dropped or damaged, it should not beoperated and needs servicing by qualified service personnel (see 'Service and assistance'). -Water and electricity are a dangerous combination. Do not use this appliance in wetsurroundings (e.g. in the bathroom or near a shower or swimming pool).-Make sure the adapter does not get wet.-Do not let water run into the appliance or spill water onto the appliance.-Do not immerse the appliance in water or rinse under the tap.-The adapter contains a transformer, which converts an unsafe 100-240V AC to a safe 24V DClow voltage. Do not cut off the adapter to replace it with another plug, as this causes ahazardous situation.-Only use the original adapter. Do not use the adapter or any of the other accessories if theyare damaged. Call 1-866-832-4361 for assistance.-Do not use the adapter in or near a power outlet that contains an electric air freshener toprevent damage to the adapter. -Protect the power cord from being walked on or pinched, particularly at plugs, outlet andpoint where they exit from lamp.-The appliance has no on/off switch. To disconnect the appliance from the power source,remove the plug from the wall outlet.-This appliance is not intended for use by persons (including children) with reduced physical,sensory or mental capabilities, or lack of experience and knowledge, unless they have beengiven supervision or instruction concerning use of the appliance by a person responsible fortheir safety.-Do not install near any heat sources such as radiators, stoves, or other apparatus thatproduce heat.-Do not impair the cooling of the appliance by covering the appliance with items such asblankets, curtains, clothes, papers, etc.CAUTION-Do not drop the appliance on the floor, hit it hard or expose it to other heavy shocks.-Place the appliance on a stable, level and non-slippery surface.-This appliance is only intended for household use, including similar use in hotels. Do not useattachments not recommended by Philips North America LLC.-Check if the voltage indicated on the appliance corresponds to the local voltage before youconnect the appliance.6English

-Unplug this appliance during lightning storms or when unused for long periods of time.GENERAL-Do not use this appliance as a means to reduce your hours of sleep. The purpose of thisappliance is to help you wake up more easily. It does not diminish your need for sleep.-Consult your doctor before you start using the appliance if you have suffered from or aresuffering from depression.-If you feel uncomfortable at any point while using RelaxBreathe in the breathing exercise,just go back to breathing normally.-If you often wake up too early or with a headache reduce the set light intensity level and/orthe set Sunrise simulation time.-If you often wake up by the alarm sound, increase the set light intensity level or the setSunrise simulation time.-If you share a bedroom with someone else, this person may unintentionally wake up fromthe light of the appliance, even though this person is further removed from the appliance.This is the result of differences in light sensitivity between people.-The power consumption of the appliance is lowest if no device is connected to the USB portand the lamp, radio, display and Wi-Fi are turned off.SAVE THESE INSTRUCTIONSContentsIMPORTANT SAFETY INSTRUCTIONS________________________________________________________ 6Introduction ___________________________________________________________________________________ 8General description___________________________________________________________________________ 8Intended use__________________________________________________________________________________ 9The effects of the connected Sleep & Wake-Up Light_______________________________________ 9Display icons__________________________________________________________________________________ 9Connecting your appliance to Wi-Fi__________________________________________________________ 10Navigating the menu__________________________________________________________________________ 11Setting wake-up profiles______________________________________________________________________ 12PowerBackUp+________________________________________________________________________________ 13Snoozing_______________________________________________________________________________________ 13Turning the alarm off__________________________________________________________________________ 13Using the appliance as a bedside lamp______________________________________________________ 13Midnight light__________________________________________________________________________________ 14Settings________________________________________________________________________________________ 14Listening to radio or your own music_________________________________________________________ 16Wind-down programs_________________________________________________________________________ 17Sunset simulation_____________________________________________________________________________ 17RelaxBreathe__________________________________________________________________________________ 17Bedtime function______________________________________________________________________________ 197English

Charging your mobile phone__________________________________________________________________ 19Cleaning and storage__________________________________________________________________________ 19Disposal________________________________________________________________________________________ 19Service and assistance________________________________________________________________________ 1990-Day Money-Back Guarantee _____________________________________________________________ 19Full Two-Year Warranty_______________________________________________________________________ 20Troubleshooting_______________________________________________________________________________ 21Safety and compliance________________________________________________________________________ 24Electromagnetic fields (EMF)_________________________________________________________________ 24FCC Information_______________________________________________________________________________ 25Specifications__________________________________________________________________________________ 25Introduction The Philips connected Sleep & Wake-Up Light helps you wake upmore pleasantly. If the Sunrise simulation is active (default is 30minutes), the light intensity of the lamp gradually increases to the setlevel and the light color changes from deep morning red to brightdaylight. The light gently prepares your body for waking up at the settime. To make waking up an even more pleasant experience, you canuse natural wake-up sounds or the FM radio to wake up to.The light-guided breathing function, personalized sun settings,bedroom environment tracking and several other features make thisWake-Up Light the perfect companion for your bedroom.Tip: Using the Philips SleepMapper app will enable extra features. Anyinformation about these features is explained in the app.General description1 Deco ring2 Lamp housing3 Display4 Sound pressure sensor5 USB charging port6 Reset button7 AmbiTrack sensor: Humidity and temperature sensor8 Radio antenna9 Auxiliary (AUX) inlet10 Adapter DC-inlet11 Speaker12 Snooze/Midnight Light13 Adapter14 Small plug8English

AUX inlet Sound off Radio presets Snooze/Midnight LightWi-Fi disabled Wi-FiBedtimeConnecting your appliance to Wi-FiEasy Wi-Fi setupDownload the Philips SleepMapper app from Google play or the Appstore on your smartphone. See the information in Google play or theApp store to check if your smartphone is compatible with the app. Youcan easily set up the Wi-Fi connection to your connected Sleep &Wake-Up Light. The setup to install your Sleep & Wake-Up Light and connect to yourhome Wi-Fi network only needs to be done once. This setup will takeapproximately 5-10 minutes.Setup wizard of the connected Sleep & Wake-Up Light1When you use your connected Sleep & Wake-Up Light for the firsttime, a setup wizard starts on the appliance.2After selecting your language on the display of the appliance,continue in the app. Make sure that you have the app open on yoursmartphone.3Follow the instructions in the app to connect your appliance to theWi-Fi network. If you have trouble connecting your appliance,check the items mentioned in the troubleshooting section (see'Troubleshooting').-If you previously chose to set up your appliance without the app,but now want to connect your appliance to the app you press andhold the Wi-Fi icon for 8 seconds. The access point mode icon willbe shown on the display . Open the app on your smartphone toconnect. -If you have changed your Wi-Fi home network or changed yourpassword, you also need to press the Wi-Fi icon . You will seethe access point mode icon on the display .Open the app onyour smartphone to connect.10 English

Press the bedside lamp icon on the display to switch on the bedsidelamp. Note: You can increase and decrease the brightness intensity. You canselect a brightness between 1 (low) and 25 (high). The defaultbrightness setting is 18. To switch off the lamp, press the cross icon in the menu.Tip: When the light is on, you can also turn off the light with a singletap on the top of the appliance. All active programs will stop. Setalarms are still active.Midnight lightIf you wake up during the night, you can tap the top of the applianceto activate a dim light. This dim, subtle orange light provides you withjust enough light to find your way in the dark. Switch off the Midnightlight by tapping the top of the appliance again.Note: The Midnight light cannot be activated directly when the mainlight is already on. In that case, first tap the top of the appliance todeactivate the main light. Then tap again to activate the Midnightlight.SettingsIn this menu, you can adjust the clock time, the audio feedback andthe display brightness of the appliance.Note: Press and hold the settings icon for 5 seconds to open a newmenu, in which you can select DEMO mode (accelerated wake-upcurve) or VERSION (firmware version of the appliance).Time14 English

You can change the time and switch between a 12-hour clock(AM/PM) and a 24-hour clock by pressing on the toggle icon (12/24).Wi-FiTurn Wi-Fi on or off by pressing on the Wi-Fi icon. When Wi-Fi isdisabled , any update made in the app will not be implementeduntil the Wi-Fi connection is restored.Note: Press and hold the Wi-Fi icon for 8 seconds to return to accesspoint mode. Open access point mode when you want to connect yourappliance to a different Wi-Fi network or if you have changed yourWi-Fi password.If you accidentally activated access point mode, remove the adapterfrom the wall outlet. Wait for 30 seconds to connect the appliance tothe power outlet again. Your connected Sleep & Wake-Up Lightremembers the network you were connected to.Audio feedbackWhen you press any menu icon, you hear a click. If you do not want tohear clicks when you press an icon, press the audio feedback icon toturn off the audio feedback. You hear one click as a confirmation. Toreactivate the audio feedback, press this icon again. You hear twoclicks to confirm that audio feedback has been activated.DisplayDisplay brightnessYou can adjust the display brightness from level 1 to level 6. We adviseyou to set the display contrast in a dark bedroom. Choose a contrastlevel that is optimal for you to see the display at night. The displaycontrast will increase to a higher level when the Connected Sleep &Wake-up Light measures a lot of light in the bedroom. This happensautomatically, so you will always be able to see the display, evenwhen the surroundings are lighter.Display on/offIf you do not want the appliance to produce any light (including timeindication), you can turn off the display completely by pressing thedisplay icon. Normally, if you do not touch the display for some time in any menu,the display reverts to time and status indication only. When thedisplay is off, no time indication is shown.Press the crossed-out icon to turn on the display again.15English

Tip: If you want to check the time or select a function while the displayis off, just place your hand near the display to turn it on for a fewseconds.Listening to radio or your own musicTip: When the radio or music is on, you can turn off the sound with asingle tap on top of the connected Sleep & Wake-Up Light. All activeprograms will stop. Set alarms are still active.RadioYou can listen to the FM radio with the connected Sleep & Wake-UpLight. If you have set the radio function in the setup wizard, it showsthe selected radio station. You can manually change the radio stationby selecting the FM frequency of another radio station. Tip: Make sure that you unwind the antenna fully and move it arounduntil the radio has the best reception.You can preset 5 radio stations. First, select a radio station by settingthe FM frequency. Press and hold the double arrow icon toautomatically search for the next radio station. After setting a radio station, you can easily add another preset radiostation by selecting the toggle icon. With this process, you can preset5 radio stations.Set the preferred volume. To save the radio frequency, press thecheck mark icon. Music via Auxiliary (AUX) inletYou can use the connected Sleep & Wake-Up Light as a speaker formusic by connecting a music playing device (for instance your mobilephone) to the AUX inlet.Note: You cannot wake up to music from a device connected to theAUX inlet.If the sound is not loud enough when you have set the connectedSleep & Wake-Up Light to maximum volume, increase the volume ofyour music playing device.16 English

If the sound is too loud or distorted when you have set the connectedSleep & Wake-Up Light to a low volume setting, decrease the volumeof your music playing device.Note: Press and hold the music note icon for 5 second toactivate/deactivate the sound via the menu. You can also deactivatethe sound by tapping the top of the appliance. Note: You need an AUX cable to connect the connected Sleep &Wake-Up Light to a music playing device.Wind-down programsThe appliance features two wind-down programs to help you relaxbefore you fall asleep.Note: Press and hold the wind-down icon for 5 seconds toactivate/deactivate the wind-down program. You can also deactivatethe active wind-down program by tapping the top of the appliance.Sunset simulationDuring the sunset simulation, the brightness of the light decreasesgradually with colors changing from bright yellow to warm orange tosoft red. You can set the duration of the sunset simulation and theinitial light intensity of the sunset simulation.You can also select a sound that fades away during the sunsetsimulation. You can set the sound source and the initial volume. Youcan either choose a natural sound, radio or no sound. You can alsoplay your own music by connecting a music playing device to the AUXsocket.Note: If you have set your sunset simulation in the setup wizard, it willstart immediately. If you have not set it, the appliance starts with adefault sunset simulation. RelaxBreatheRelaxBreathe uses the belly breathing technique as a basis for thebreathing program. You can choose one of the breathing programs,guided by light or sound. The combination of the belly breathingexercise and the guidance of the connected Sleep & Wake-Up Lighthelps you slow down and feel relaxed. 17English

Belly breathing for relaxationBelly breathing is the most recognized breathing exercise techniqueto help people relax. When you breathe from your belly, yourdiaphragm pulls down automatically. This pulls down your lungs andallows you to inhale fully and deeply.Caution: If you feel uncomfortable at any point during this breathingexercise, just go back to breathing normally. How to do belly breathing1Lie down comfortably on your back. 2Inhale through your nose, exhale through your nose or mouth. 3Place one hand on your stomach and your other hand on yourchest. You should see your hand on your stomach move up with eachinhale and move down with each exhale. The hand on your chestshould only move slightly.4Your breath should only come from your belly. Try to make yourexhale longer than your inhale as this will quickly make you feelmore relaxed.Note: The RelaxBreathe function of the appliance can guide youduring belly breathing.You can select one of seven relaxation programs with presetbreathing rhythms. Each relaxation program has a different breathingrhythm. The program '4 breaths' is preset to 4 breaths per minute.Program '5 breaths' is preset to 5 breaths per minute. Each nextprogram has one additional breath per minute. The last program (10breaths) is preset to 10 breaths per minute.You can select light or sound to guide you during the selectedrelaxation program. Follow the light or sound when you inhale andexhale. -For guidance with light, inhale when the light intensity increases. Inbetween the two subtle light flashes, hold your breath. Exhaleslowly when the light intensity decreases. -For guidance with sound, inhale when the intensity of the sound ofthe waves increases. When the intensity of the sound pauses, holdyour breath. Slowly exhale when the intensity of the sound of thewaves decreases. Follow your preferred rhythm with the help of light or sound for amore relaxed feeling. You can even do this with your eyes closed. Note: You can find an instruction video of RelaxBreathe in the appand on the Philips website.18 English

Bedtime functionYou can track your time in bed by double tapping the top of theappliance before going to sleep. You can also start the bedtimefunction by pressing 'start tracking' in the SleepMapper app.A moon icon will appear on the display of the appliance to let youknow bedtime tracking has started. You can find more informationabout the bedtime function in the app.Charging your mobile phoneYou can use the USB port (see 'General description') to charge yoursmartphone (max 1000 mA).Cleaning and storage-Clean the appliance with a soft, dry cloth.-Do not use abrasive cleaning agents, pads or cleaning solvents likealcohol, acetone, etc., as this may damage the surface of theappliance.-If you are not going to use the appliance for an extended period oftime, remove the adapter from the wall outlet and store theappliance in a safe, dry location where it will not be crushed,banged, or subject to damage.-Do not wrap the cord around the appliance when storing it.DisposalYour product is designed and manufactured with high qualitymaterials and components, which can be recycled and reused. Forrecycling information, please contact your local waste managementfacilities or visit www.recycle.philips.com.Service and assistanceThis appliance has no other user-serviceable parts. For assistance visitour website: www.philips.com/support or call toll free:1-866-832-4361.Online information is available 24 hours a day, 7 days a week.90-Day Money-Back Guarantee If you are not fully satisfied with your product send the product backand we’ll refund you the full purchase price.19English

The product must be shipped prepaid by insured mail, insuranceprepaid, have the original sales receipt, indicating purchase price anddate of purchase, and the money-back guarantee return authorizationform enclosed.We cannot be responsible for lost mail.The product must be postmarked no later than 90 days after the dateof purchase. Philips reserves the right to verify the purchase price ofthe product and limit refunds not to exceed suggested retail price.To obtain money-back guarantee return authorization form, call1-866-832-4361 for assistance. Delivery of refund check will occur 6–8 weeks after receipt of returnedproduct.Full Two-Year WarrantyPhilips North America LLC (USA) and Philips Electronics Ltd (Canada)warrant this new product against defects in materials or workmanshipfor a period of two years from the date of purchase, and agree torepair or replace any defective product without charge. IMPORTANT: This warranty does not cover damage resulting fromaccident, misuse or abuse, lack of reasonable care, or the affixing ofany attachment not provided with the product or loss of parts orsubjecting the product to any but the specified voltage or batteries.*NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTALOR CONSEQUENTIAL DAMAGES.In order to obtain warranty service, go to www.philips.com/supportfor assistance. It is suggested that for your protection you returnshipments of product by insured mail, insurance prepaid. Damageoccurring during shipment is not covered by this warranty.NOTE: No other warranty, written or oral, is authorized by PhilipsNorth America LLC.This warranty gives you specific legal rights, and you may also haveother rights which vary from state to state, province to province orcountry to country. Some states do not allow the exclusion orlimitation of incidental or consequential damages, so the aboveexclusion and limitations may not apply to you.* Read enclosed instructions carefully.In US manufactured for: Philips Personal Health, a division of PhilipsNorth America LLC, P.O. Box 10313, Stamford, CT 06904.In Canada imported by: Philips Electronics LTD, 281 Hillmount Road,Markham, Ontario L6C 2S3.PHILIPS and Philips shield are registered trademarks of KoninklijkePhilips N.V.20 English

©2018 Philips North America LLC. All rights reserved.TroubleshootingThis chapter summarizes the most common problems you couldencounter with the appliance. If you are unable to solve the problem with the information below,visit www.philips.com/support or call 1-866-832-4361 for assistance.Connectivity troubleshootingProblem SolutionI cannot downloadthe app on mysmartphone.The app is available for Android and IOS smartphones. The app is notavailable for Windows phones. I cannot connect myWake-Up Light to myhome-Wi-Fi network,what should I do?If you cannot connect your Wake-Up Light to your home Wi-Finetwork and still see the flashing icon for access point mode , itcould be one of following issues: 1. Wrong password. Make sure that you entered the correct Wi-Finetwork password and try again.2. Is your router suitable for connection with your Wake-up Light?Your router must have a 2.4 GHz band to communicate with theappliance. For the first time setup make sure your smartphone andthe appliance are both connected to the same 2,4 GHz Wi-Fi network,otherwise you will not be able to connect the appliance and yoursmartphone.3. Check the signal strength of the Wi-Fi. If the signal is weak, theappliance cannot connect properly. Move the appliance closer to therouter to make sure that a good Wi-Fi signal is available.4. If the previous steps are not the issue, call 1-866-832-4361 forassistance. Connecting myconnected Sleep &Wake-Up Light to aWi-Fi guest networkdoes not work.Within a Wi-Fi guest network, different devices (e.g. your smartphoneand connected Sleep & Wake-Up Light) are often not allowed tocommunicate with each other. You will see the flashing icon foraccess point mode on the display of the appliance. If you want to change this setting within your own Wi-Fi guestnetwork, enable universal Plug and Play (uPnP) on your router. 21English

Problem SolutionI cannot use the appto set alarms orcontrol the connectedSleep & Wake-UpLight.First, check if your Sleep & Wake-Up Light is connected to a Wi-Finetwork. If you completed the Wi-Fi Setup through the PhilipsSleepMapper app and connected your appliance to a specific Wi-Finetwork, you should see a steady Wi-Fi symbol on the display of theappliance . First check if Wi-Fi on your smartphone and router are enabled. If yousee the Wi-Fi disabled icon on the display of the appliance, enableWi-Fi first (see 'Wi-Fi'). -Your smartphone could have reconnected to a different Wi-Finetwork. Make sure that your smartphone and appliance areconnected to the same home Wi-Fi network. If you see the Wi-Fi connection issue icon , it could be one of thefollowing issues. 1. Check the settings for your home Wi-Fi network on the router. Itcould be that universal Plug and Play (uPnP) is not enabled on yourrouter. Enable this setting on the router.2. Check the signal strength of the Wi-Fi. If the signal is weak, theappliance cannot connect properly. Move the appliance closer to therouter to make sure that a good Wi-Fi signal is available.3. You might have changed the home Wi-Fi password or installed anew router (see 'Easy Wi-Fi setup').How do I remove mypersonal Wi-Fisettings and alarmsfrom the connectedSleep & Wake-UpLight?Go back to factory settings by pressing the end of a paperclip into thereset button on the back of the appliance (see 'General description').I want to connect mynew smartphone tomy connected Sleep &Wake-Up Light. Whatdo I need to do? Please install the app again on your new smartphone. Indicate in theapp that you already installed the connected Sleep & Wake-Up Lightand follow the instructions in the app. General troubleshootingProblem SolutionThe icon on thedisplay or the light onthe appliance doesnot respond when I tryto set differentfunctions. Go back to factory settings by pressing the end of a paperclip into thereset button on the back of the appliance (see 'General description').Check if this solves the problem. If the appliance still does not work,call 1-866-832-4361 for assistance. Please note that all personalsettings (set alarm etc.) will be removed by going back to factorysettings.22 English

Problem SolutionThe light wakes metoo early or too late.Perhaps the light intensity level you have set is not appropriate foryou. Try a lower light intensity level if you wake up too early or ahigher intensity level of you wake up too late. You can also changethe duration of the wake-up curve. If light intensity 1 is not lowenough, move the appliance further away from the bed. If the lightintensity is not high enough to wake you, make sure that the light ofthe appliance is not blocked by any object and the appliance isnearby.I am unable to turnthe Midnight Lightfunction on/off.Make sure you tap on the correct position (top/back) of theappliance. I am unable to streammusic via USB.The USB connection is only for charging your mobile phone. You arenot able to stream music to the connected Sleep & Wake-Up Light.The aux inlet doesn'twork properly.Try to set the volume on your smartphone either higher or lower. Ifnecessary, adjust the volume level on the appliance as well.Suddenly theappliance makes abeeping sound.The backup alarm went off. This can happen up to 8 hours after thepower was removed and a set alarm time is due. The alarm soundstops automatically after approximately 1 minute. You also can stopthe alarm sound immediately if you power up the appliance for abrief moment.To prevent the back-up alarm from going off when the power isremoved (e.g. storage) disable the alarms prior to powering down.Safety and complianceThis appliance meets the safety requirements in the USA and Canada for:-UL 153, CSA C22.2 No. 250.4-14 (Portable Electric Luminaires)-UL 8750 (Light Emitting Diode (LED) Equipment for Use in Lighting Products)-UL 60065, CSA-C22.2 No. 60065-03 (Audio, Video and Similar Electronic Apparatus – Safety Requirements) Electromagnetic fields (EMF)This Philips appliance complies with all applicable standards andregulations regarding exposure to electromagnetic fields.24 English

FCC Information-This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and the receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.-This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.-This equipment complies with FCC radiation exposure limites set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.-This Class B digital apparatus complies with Canadian ICES-005.-This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:- This device may not cause interference; and- This device must accept any interference, including interference that may cause undesired operation of the device.-Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :-l'appareil ne doit pas produire de brouillage, et-l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. SpecificationsModelRated input voltage adapter 100-240V ACRated input frequency adapter 50/60HzNo-load power adapter <0.1WRated output voltage adapter 24V DCRated output power adapter 18WAverage Standby Power appliance(Conditions: all functions suspended, ambientlight scenario: day 12h 500 lux, night 12h 0lux)25English-Wi-Fi on and display at maximumbrightness < 2W-Wi-Fi off and display maximum brightness< 1W

USB charging port 5V, 1000mAAUX sensitivity 280mVNominal light output (level 1 - 25) 1 - 350 lux at 45cm (1 -350* lux at 17.7 in.)depending on modelNominal light color (level 1 - 25) 1500-2800KPhysical characteristicsDimensions (height x width x depth) 22.5 x 22.0 x 12.0cm (8.8 x 8.7 x 4.7in.)Weight main unit / adapter Approx 0.77kg (27.2oz) / 0.14kg (4.9oz)Cord length adapter 183cm (6ft)ClassificationMain unit Portable Electric LuminairesAdapter Class 2 power supplyMode of operation ContinuousOperating conditionsTemperature +5°C to +35°C (41°F to 95°F)Relative humidity 15% to 90% (no condensation)Storage conditionsTemperature -20°C to +50°C (-4°F to +122°F)Relative humidity 15% to 90% (no condensation)AmbiTrack sensorsLight sensor 0 lux to 10000 luxTemperature sensor 0°C to +50°C (32°F to +122°F)Humidity sensor 0% to 100% (relative humidity) Sound pressure sensor 30dBA to 70dBA 26 EnglishWiFiOperating Frequency Channel 1 to channel 11 (2412 MHz - 2462 MHz)Modulation Type IEEE 802.11b, 802.11g, 802.11n (20 MHz)RF output power Max. 30 dBmFMOperating Frequency 87.5 MHz - 108.0 MHz

empty page before backcover

Specifications are subject to change without notice.© 2018 Koninklijke Philips N.V.All rights reserved.Les caractéristiques sont susceptibles d’être modifiées sans avis préalable.© Koninklijke Philips N.V., 2018Tous droits réservés.Las especificaciones están sujetas a modificaciones sin previo aviso.© 2018 Koninklijke Philips N.V.Todos los derechos reservados.4222.002.7347.1 (3/30/2018)>75% recycled paper>75% papier recyclé

Navigation menu