Pelican Accessories PRED-S2 Wireless Game Controller Dongle User Manual Revised Manual

Pelican Accessories Wireless Game Controller Dongle Revised Manual

Revised Manual

PL-6613PL-6614 Ref#: 080805
IMPORTANT NOTICEPredator 2.4FCC ID: O7X-PRED-S1FCC ID: O7X-PRED-S2Changes or modifications not expressly approved by the manufac-turercould void the user's authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions; (1) this device may notcause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause unde-sired operation.1Pelican and its logo are registered trademarks.Sony is a registered trademark of Sony Corp.PlayStation® 2 & PlayStation® are registered trademarksof Sony Computer Entertainment Inc.This product is not designed, manufactured, sponsored orendorsed by Sony Computer Entertainment Inc.
Table of ContentsConsole Protection Guarantee .................. 3Product Layout........................................ 4-5Overview.................................................... 6Features/Benefits ...................................... 7Directions .................................................. 9Trouble Shooting........................................1 0Warranty/CustomerService........................1 12
Pelican’s Console Protection Guarantee assures you ofPelican’s commitment to quality and customer satisfaction.The Protection Guarantee warrants the connection (theplug port of the video game console and the plug of thePelican controller) between the controller and your videogame console system., i.e., that with the proper use of ourcontroller (see manual) we agree to replace or repair yourvideo game system in the event that our controller directlycauses damage to your game console as a result of ourcontroller failing to perform properly. Circumstances thatmay cause our protection guarantee to take effect might beone of the following :the video game console does notacknowledge a controller which has been plugged in, orig-inal controller fails to operate after using a Pelican con-troller, other non-pad controllers fail to operate after usinga Pelican Controller. This protection warranty does notinclude the video game power supply, any part relating tothe CD/DVD load and read mechanism, internal operatingsystem, nor the cabinet of the video game system. Thiswarranty will not apply if the Pelican controller is not usedas directed in the product manual enclosed. For furtherinformation or help please contact us toll free at (800) 331-3844 or on line at http://www.pelicanperformance.com3Console Protection Guarantee
Product LayoutPredator 2.4 Controller4ContouredGripsBatteryDoorAction (Fire)ButtonsAnaolog SticksDirectionalPad
5Connect ButtonFront ViewBottom ViewBack ViewSignal LEDReceiver/Transmitter Unit
OverviewThe Predator 2.4 Wireless Controller uses advanced 2.4GHz technology and Channel-Hopping which gives youthe ability to play without the limitations and hassles oftypical corded controllers and switch-dependentcontrollers. All of this gives you lightning fast control overyour favorite games without cords to trip over, channels toset, or fears of outside interference disturbing play con-trol. There are a few buttons, LED’s (lights), and featuresnot found on your basic PlayStation®2 Controller. The fol-lowing is an explanation of these elements.Auto-Hopping This removes the hassle of setting chan-nels via a series of switches or having your connectioncorrupted by interference. Auto-hopping moves to thenearest, clearest channel for you, with no breaks in play,to make sure your signal never lags behind your com-mands. Simply push the Reset Hole on the receiver, waitthree seconds and press the Start button on the con-troller to make a connection.6
Features & BenefitsAuto On/Off:Touch any of the four action buttons Start, or Select topower up your new wireless controller.Hyper-Responsive Controls: Our controls are madeout of top quality components so that you lose nothing incontrol and response when you need it most and over thelife of your controller.Signal LED:Multi-function LEDs:LED lights on controller and receiver are used to indicatevarious functions as illustrated in chart below.LED OFF = Power OFFLED solid RED = ANALOG modeLED flash every 3-seconds = seeking connection withreceiverLED fast GREEN flash = Action buttons depressedRumble On/OffDepressing and holding the DOWN direction on theDirectional Pad (D-Pad) while pressing the SELECT but-ton once turns off the rumble motor. A short rumble indi-cates success. Depressing and holding the UP directionon the D-Pad while pressing the SELECT button onceturns the rumble motors on. A long rumble indicates suc-cess.7
Battery Compartment:Predator 2.4 Wireless Controller requires the use of twoAA batteries (not included). The batteries were placed tobalance the weight perfectly in the controller to increasecomfort and controlling. Double check and make surebatteries are inserted correctly.Power Save Mode:When not in use for 3 minutes the Predator 2.4 WirelessController automatically goes into a sleep mode to con-serve batteries. A touch of any action button puts thecontroller back into play mode. Holding the Start buttonfor 5 seconds will send the pad to sleep. After 15 minutesof non-use, it will power off. Press the Start button or oneof the four action buttons to return the controller fromsleep.8Please verify that all the batteries are inserted correctly. If they are put in wrong to inserted incorrectly, it may cause per-sonal injury as well as damage to your Predator 2.4 WirelessController.WARNING
Directions1. Make sure your PlayStation®2 is turned off.2. Remove the battery lid and place 2 AA batteries into thePredator 2.4 Wireless controller. Make sure the batteriesare inserted as shown in the battery compartment. A pairof matched,fresh, premium, batteries will yield best results.3. Insert the receiver into thePlayStation®2 controller slot 1 (or slot 2 ifslot 1 is already occupied) and power upthe Predator 2.4 and then yourPlayStation®2. Note: Locate the ConnectButton at the bottom of the receiver.Insert a pin into the hole and push theConnect Button inward once on thereceiver (Signal LED will FLASH Slowly).Then press the Select Button on con-troller. This programs the Receiver to con-nect to that Controller every time it isused. This operation can be done again and again to con-nect to multiple Controllers.4. Alternatively, if any problems should occur during play(due to low batteries, receiver disconnection from the sys-tem,etc.) you can turn the controller off and then on, checkthe control, and if you still do not have signal, press theconnect button on the receiver, wait three seconds andthen press the Start button or one of the action Buttons.Note: If you are using more than one Predator 2.4Wireless Controller, simply repeat the above steps and itshould connect exactly the same way on an availablechannel.5. Insert a game into your PlayStation®2.6. You are now ready to play.9
TroubleshootingIf you are having difficulties with your new Predator 2.4Wireless Controller please refer below:My system turns on but I don’t see anything on the TV.1. Check to verify that your A/V cable is properlyconnected to your system.2. Check to verify that your A/V cable is properly pluggedinto your television set.My Predator 2.4 Wireless Controller does not respond.1. Check to verify that your batteries are inserted correctly.2. Check to verify that the power is on. Check to verify thatthe signal LED is blinking.The power LED is on but my Predator 2.4 does notrespond while in the system menu.1. Check to verify your Predator 2.4 Receiver / Transmitterunit is firmly and properly plugged into correct controllerport.2. Check to verify that the receiver is firmly connected tothe system and the light is on. Then, press the connectbutton, wait three seconds and press Start or any actionbutton on the controller in the corresponding slot.10
Warranty CardPelican warrants to the  original consumer purchaser that the prod-uct will be free from defects in  materials and / or workmanship for aperiod of 5 years from the date  of purchase. If a defect covered bythis warranty occurs during  this period, Pelican at its option willrepair or replace, at no  charge, any part that Pelican determines tobe defective.To obtain warranty service  during the warranty period, send thedefective product postage  pre-paid, with a money order for $4.00 tocover the return postage and  handling, along with proof of pur-chase, short description of the  problem, your return address and thedate of purchase to:Pelican1840 East 27th StreetVernon, CA 90058This warranty shall not apply  if the product has been damaged byabuse, misuses, negligence,  accident, modification, tampering or byany other causes unrelated to  defective materials and / or workman-ship.Repair or replacement as  provided under this warranty is PelicanAccessories' exclusive  prerogative. ANY APPLICABLE IMPLIEDWARRANTIES, INCLUDING  WARRANTIES OR MERCHANTABIL-ITY AND FITNESS FOR A PARTICULAR  PURPOSE ARE HEREBY LIMITED TO 5 YEARS FROM THE  DATE OF PURCHASE ANDARE SUBJECT TO THE CONDITIONS  SET FORTH IN THIS LIM-ITED WARRANTY. IN NO EVENT SHALL  PELICAN BEACCOUNTABLE FOR INCIDENTAL  DAMAGES RESULTINGFROM THE BREACH OF ANY EXPRESS  OR IMPLIED WAR-RANTIES. This warranty gives you  specific legal rights, and youmay also have other legal  rights, which vary from state to state.11
For technical questions please visithttp://www.pelicanperformance.com or call us directly at:1-800-331-384412

Navigation menu