Pelican Accessories G3-2 G3 Wireless Controller User Manual Manual

Pelican Accessories G3 Wireless Controller Manual

Manual

Instruction for Operation:Wireless with RumbleLIMITED WARRANTYPelican Accessories warrants to the original consumer purchaser thatthe product will be free from defects in materials and / or workmanshipfor a period of 120 days from the date of purchase. If a defect coveredby this warranty occurs during this period, Pelican Accessories at itsoption will repair or replace, at no charge, any part that Pelican Accessoriesdetermines to be defective.To obtain warranty service during the warranty period, send the defectiveproduct postage pre-paid, with a money order for $4.00 to cover thereturn postage and handling, along with proof of purchase and the dateof purchase to:PELICAN ACCESSORIES1840 East 27th StreetVernon, CA 90058This warranty shall not apply if the product has been damaged by abuse,misuses, negligence, accident, modification, tampering or by any othercauses unrelated to defective materials and / or workmanship.Repair or replacement as provided under this warranty is PelicanAccessories' exclusive prerogative. ANY APPLICABLE IMPLIEDWARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE ARE HERBY LIMITEDTO 120 DAYS FROM THE DATE OF PURCHASE AN ARE SUBJECTTO THE CONDITIONS SET FORTH IN THIS LIMITED WARRANTY. INNO EVENT SHALL PELICAN ACCESSORIES OR INCIDENTALDAMAGES RESULT FROM THE BREACH OF ANY EXPRESS ORIMPLIED WARRANTIES. This warranty gives you specific legal rights,and you may also have other legal rights,Which vary from state to state.Pelican and its logo are registered trademarks.GameCube™ is a registered trademark ofNintendo of America, Inc.This product is not desgined, manufactured, sponsoredor endorsed by Nintendo of America, Inc.Instruction for Operation:PL-7008Wireless with RumbleOur products are developed, tested, and approved by gamers forgamers. Pelican’s Gamer’s Guarantee states: If you are not 100%satisfied with your new G3 Wireless controller we will replace itor replace it with an equal valued item.SIGNALCHANNEL1 2 3 4OFF ON RUMBLESTART / PAUSEOFFRL4321SIGNALPOWERB ABANDLeft & Right TriggersTurbo ButtonAnalogStickD-PadPower On/Off-rumble Off SwitchA/B BandSwitchChannel SwitchActionButtonsSignal LED(Yellow)Start/PauseAnalogStickA BBANDLink LED (Green)Signal LED (Yellow)Power LED (Red)Channel SwitchBand SwitchPRODUCT OVERVIEW:G3 Wireless Controller uses advance technology which gives you the ability to play without thelimitations of a typical corded controller, hence there are a few switches and LED (lights) notfound on your basic GameCube™ Controller.Channel Switch (Receiver and Controller):This switch selects the broadcast channel of the radio frequency. There are four positions;1, 2, 3 and 4. There is a corresponding Channel Switch on the receiverBand Switch (Receiver and Controller):This switch selects the bandwidth. There are two positions; A and B. There is a correspondingBand Switch on the receiverPower Switch (Controller):This switch selects the power mode. There are 3 positions; Off, On, and Rumble OffSignal LED (Yellow, Receiver and Controller):When on or flickering data is being transmitted between Controller and ReceiverPower LED (Red, Receiver):When on indicates Receiver is operating correctlyLink LED (Green, Receiver):When on indicates Controller and Receiver are linked and communicating. If flickering the Controller and Receiver are not communicatingINSTRUCTIONS:1. Insert Batteries:Remove the battery lid and place the two AA batteries (included) into the G3 Wireless Controller. Make sure they are inserted as shown in the battery compartment. The batteriesincluded are not long life.2. Plug in the Receiver:With the GameCube™ turned off, plug the receiver into controller port one (far left port.)3. Check Band setting:Confirm that the Band Switch is set to A on both the controller and the receiver.Note:the only time you would ever change this switch is if you experienced a drop off in thesignal, causing game play to be suspended. If this happens repeatedly we suggest you switch to Band B on both the Controller and Receiver.4. Select a Channel on the Controller:You may select any channel you desire 1, 2, 3 or 4.5. Select a Channel on the Receiver:This must match the channel selected on the Controller. Note:If using more then one controller you must use different channel settings, i.e., the firstcontroller and receiver are set to Channel 1, the second controller and receiver are set to Channel 2. The channel position selected on the G3 Controller and Receiver have no relation to the GameCube™ controller ports.6. Turn on the Controller:Move the Power Switch to On, the signal LED will light.Note:If you wish to extend battery life select the Rumble Off position. This will turn off the rumble effect in game play resulting in a doubling of your battery life.OTHER FEATURES:Multiple Players:You may play with up to four G3 Wireless controllers. Check to see that the channel switchesare set as outlined above.Power Save Mode:When not in use the G3 controller automatically goes into a sleep mode to conserve batteries. A touch of any button puts the controller back into play mode.Note: Turn off the controller when not in use to extend your battery life.Turbo Function:This feature allows rapid fire of any selected fire button. To turn on, press the Turbo button,and then while still holding down the Turbo button press the fire button that you wish to havethe Turbo feature. To return the button back to a normal fire button repeat the above processor turn on and off the controller.For technical questions please visithttp://www.pelicanacc.comor call us directly at 1-800-331-3844Gamer’s GuaranteeChanges or modifications not expressly approved by the manufacture could void theuser's authority to operate the equipment. This device complies with Part 15 of theFCC Rules. Operation is subject to the following two conditions; (1) this device maynot cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.G3 Wireless ControllerG3 Wireless Receiver

Navigation menu