Pelican Accessories ECLP-S-1 Wireless Controller User Manual

Pelican Accessories Wireless Controller Users Manual

Users Manual

CHANNEL1 2 3 4OFF ON RUMBLEOFFBACKSTARTInstruction for Operation:LIMITED WARRANTYPelican Accessories warrants to the original consumer purchaser thatthe product will be free from defects in materials and / or workmanshipfor a period of 120 days from the date of purchase. If a defect coveredby this warranty occurs during this period, Pelican Accessories at itsoption will repair or replace, at no charge, any part that Pelican Accessoriesdetermines to be defective.To obtain warranty service during the warranty period, send the defectiveproduct postage pre-paid, with a money order for $4.00 to cover thereturn postage and handling, along with proof of purchase and the dateof purchase to:PELICAN ACCESSORIES1840 East 27th StreetVernon, CA 90058This warranty shall not apply if the product has been damaged by abuse,misuses, negligence, accident, modification, tampering or by any othercauses unrelated to defective materials and / or workmanship.Repair or replacement as provided under this warranty is PelicanAccessories' exclusive prerogative. ANY APPLICABLE IMPLIEDWARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE ARE HERBY LIMITEDTO 120 DAYS FROM THE DATE OF PURCHASE AN ARE SUBJECTTO THE CONDITIONS SET FORTH IN THIS LIMITED WARRANTY. INNO EVENT SHALL PELICAN ACCESSORIES OR INCIDENTALDAMAGES RESULT FROM THE BREACH OF ANY EXPRESS ORIMPLIED WARRANTIES. This warranty gives you specific legal rights,and you may also have other legal rights,Which vary from state to state.Instruction for Operation:PL-2006ABANDWhiteBottonAnalogStickD-PadPRODUCT OVERVIEW:Eclipse Wireless Controller uses advance technology which gives you the ability to play withoutthe limitations of a typical corded controller, hence there are a few switches and LED (lights)not found on your basic Xbox™ Controller.Channel Switch (Receiver and Controller):This switch selects the broadcast channel of the radio frequency. There are four positions;1, 2, 3 and 4. There is a corresponding Channel Switch on the receiverBand Switch (Receiver and Controller):This switch selects the bandwidth. There are two positions; A and B. There is a correspondingBand Switch on the receiverPower Switch (Controller):This switch selects the power mode. There are 3 positions; Off, On, and Rumble OffINSTRUCTIONS:1. Insert Batteries:Remove the battery lid and place the two AA batteries (included) into the Eclipse Wireless Controller. Make sure they are inserted as shown in the battery compartment. The batteriesincluded are not long life.2. Plug in the Receiver:With the Xbox™ turned off, plug the cable of receiver into controller port one (far left port.)3. Check Band setting:Confirm that the Band Switch is set to A on both the controller and the receiver.Note:the only time you would ever change this switch is if you experienced a drop off in thesignal, causing game play to be suspended. If this happens repeatedly we suggest you switch to Band B on both the Controller and Receiver.4. Select a Channel on the Controller:You may select any channel you desire 1, 2, 3 or 4.5. Select a Channel on the Receiver:This must match the channel selected on the Controller. Note: If using more then one controller you must use different channel settings, i.e., the firstcontroller and receiver are set to Channel 1, the second controller and receiver are set to Channel 2. The channel position selected on the Eclipse Wireless Controller and Receiver have no relation to the Xbox™ controller ports.6. Turn ON the ControllerTurn the power switch located on the Controller to the ON position - You will see the following:On the Controller the LED will come on, lit greenNote:If the LED on the pad comes on and goes to Red this is your low battery indicator meaning your battery has less then 20% power capacity.On the Receiver, the left LED will come on indicating there is a "Pad in". The right LED willflash continually indicating the signal is strongNote: If you wish to extend battery life select the rumble off position. This will turn off the rumble effect in game play, resulting in a doubling of your battery life.OTHER FEATURES:Multiple Players:You may play with up to four Eclipse Wireless controllers. Check to see that the channel switches are set as outlined above.Power Save Mode:When not in use the Eclipse Wireless controller automatically goes into a sleep mode to conserve batteries. A touch of any button puts the controller back into play mode.Note: Turn off the controller when not in use to extend your battery life.For technical questions please visithttp://www.pelicanacc.comor call us directly at 1-800-331-3844ActionButtonsAnalogStickBlackButtonChannel SwitchPowerOn/Off-RumbleOff SwitchStart Button BBandSwitchBlackButtonWhiteButtonBackBottonLEDBANDAB1 2 3 4CHANNEL SIGNALLink LED (Red)Channel SwitchBand SwitchSignal LED (Red)Memory Card SlotsL Botton R BottonChanges or modifications not expressly approved by the manufacture could void theuser's authority to operate the equipment. This device complies with Part 15 of theFCC Rules. Operation is subject to the following two conditions; (1) this device maynot cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.Eclipse Wireless ControllerEclipse Wireless ReceiverPelican and its logo are registered trademarks.Xbox™ is a registered trademark ofMicrosoft Corporation.This product is not designed, manufactured,sponsored or endorsed by Microsoft Corporation.Up to 50 Feet of RangeOver 100 Hours on Two AAs8 Separate ChannelsDual Rumble MotorsForward Positioned Black andWhite ButtonsLow Battery Indicator

Navigation menu