Paxton Access 690222 690-222-US Net2 Hands Free Keyfob User Manual

Paxton Access Ltd 690-222-US Net2 Hands Free Keyfob

User manual

Ins-30028-US Hands free keyfob for Net228/03/2007Technical SupportTechnical help is available: Monday - Friday from 5am - 5pm PST / 8am - 8pm EST Other documentation on Net2 can be found on our web site - http://www.paxton-access.com/1 800 672 PAXT support@paxton-access.co.ukSuitabilityCompatible with Net2Air readers Compatible with non Net2Air readersDimensions Length 3 1/4 ”Width 1 1/4 ”Depth 1/2 ”System SpecicationsWake up frequency 125 kHzCommunications frequency 2.4 GHzOperating temperature 0 °C - 50 °C (110 °F) (Battery Specication)Typical battery life 5 yearsBattery type 1 x CR2430Read range with Net2Air KeycardWith button - all readers up to 50 yardsP38 3 feetP50 4 feetP75 5 feetP200 8 feetP200 metal mount 6 feetSpecications
Peel back the label on the back of the keyfob to reveal a screw. Open the case by inserting a at head screw driver into the groove below the keyring loop and gently prise case open.Remove the circuit board, taking care not to touch any components by handling only the edges of the board, then remove the batteries by prising them out from the retainers. Replace the batteries, avoiding direct handling, then replace the circuit board, casing, screw and label. Battery life is approximately 5 years.Battery replacementThe token’s battery life is approximately 5 yearsThe keyfob has been designed with features to extend battery life, these include a two second timeout once access has been granted and a capability to prevent repeated access to the same door whilst the keyfob remains in the eld of the reader. Leaving the keyfob in the eld of a reader will reduce battery life.FCC ComplianceThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment.

Navigation menu