Paxton Access 333110 125 kHz Proximity Reader User Manual Users manual

Paxton Access Ltd 125 kHz Proximity Reader Users manual

Users manual

Reader covers Additional covers are available in black, white, grey, blue and silver. Registered installers can order these free of charge by logging onto the secure installer extranet: https://extranet.paxton-access.co.uk/index.aspIf you are not a registered installer please call us on +44 (0)845 838 1716 for more information.Fitting14/05/2007Technical SupportTechnical help is available:      Monday - Friday from 5am - 5pm PST / 8am - 8pm EST   Other documentation on Net2 can be found on our web site - http://www.paxton-access.com/1 800 672 PAXT support@paxton-access.co.ukSuitabilityMounted on metal surfaceWet environmentsSecurity sensitive doorsReaders mounted togetherbetween readers300mmQuickstart guideThis supplement is a brief guide to installing a P series compact system. Advanced features such as card zoning are not covered in this guide. For further information, a full installation manual is available on the website.Ins-30003-US   PROXIMITY P series compact reader
ExitExit button(push to make)Electric releaseTo 12V dc Power supply12V DC release current rating must be less than 1A. WiringScrew connector wiringWire outputs12v DC0vLock 12VLock 0VExit 0VReset - Use 1 method, not both1. Power down the unit2. Press and hold the exit button3. Power up the unit - wait for beep/red LED to go out4. Release and press the exit button a further 2 times (within 3 seconds)5. The reader will beep 6 timesOR1. Present Enrolment card2. Present Door open time card twice3. Present Enrolment card4. Present Door open time card twice5. WAIT FOR 5 SECONDS!
Enrolment Card - must be presented when the system is rst powered onPROXIMITYenrolment card1. At installation, present this    card to the reader to validate   the tokens in this pack.2. To re-validate a user token,    present this enrolment card     to the reader followed by the     user token.  BEEP!BEEP!PROXIMITYenrolment card1. At installation, present this    card to the reader to validate   the tokens in this pack.2. To re-validate a user token,    present this enrolment card     to the reader followed by the     user token.  PROXIMITYenrolment card1. At installation, present this    card to the reader to validate   the tokens in this pack.2. To re-validate a user token,    present this enrolment card     to the reader followed by the     user token.  PROXIMITYenrolment card1. At installation, present this    card to the reader to validate   the tokens in this pack.2. To re-validate a user token,    present this enrolment card     to the reader followed by the     user token.  PROXIMITYenrolment card1. At installation, present this    card to the reader to validate   the tokens in this pack.2. To re-validate a user token,    present this enrolment card     to the reader followed by the     user token.  1 2 3 41. Take the enrolment card from the new pack of user cards2. Present/swipe the enrolment card to the reader3. The reader beeps and the LED’s become lit as the enrolment card is acknowledged4. All cards in the pack are now valid. The enrolment card can now be returned to it’s pack. To add extra packs see card pack instructionsIssuing tokens1. On each page there are 4 ‘pairs’ of cards - a ‘User card’ and a corresponding ‘Shadow card’2. Write the name of the user on the shadow card3. Take the user card from the opposite pouch and issue to the user4. Keep the card pack containing the shadow cards in a safe place1 2 3 4User cardsShadow cardsBar a user1. When a card is lost or stolen it is important to bar the card from your system to avoid unauthorized access2. To bar a card or token take it’s corresponding shadow card from the card pack3. Swipe the shadow card through the reader. This will remove the lost card or token from your system4. A barred card can re-validated by swiping the enrolment card followed by the user card through the reader 1 2 3 4
Door open time (seconds) 1. Take the silent operation function card from the starter pack2. Present/swipe the card to the reader. The reader will beep3. The reader is now in silent operation mode4. Present/swipe the card again to disable silent operation mode. The reader will beep twiceSilent operation1. Take the door open time function card from the starter pack2. Present/swipe the card to the reader. The reader will start beeping3. Wait for the required period you wish the door to remain open4. Present/swipe the card again at the end of the period to set the open time. The beeping will stop1 2 3 4BEEP!Silent operation cardSwipe this card to silence the beeping noises made by the reader. Swipe the card again to re-enable the beepingnoises.Silent operation cardSwipe this card to silence the beeping noises made by the reader. Swipe the card again to re-enable the beepingnoises.Silent operation cardSwipe this card to silence the beeping noises made by the reader. Swipe the card again to re-enable the beepingnoises.BEEP!BEEP!1 2 3 4BEEP!BEEP!Door open timeThe period that the door isunlocked for when a validcard is swiped is set asfollows: Swipe this card; thereader will bleep; wait for therequired period; swipe thecard again; the bleeping will stop.Door open timeThe period that the door isunlocked for when a validcard is swiped is set asfollows: Swipe this card; thereader will bleep; wait for therequired period; swipe thecard again; the bleeping will stop.Door open timeThe period that the door isunlocked for when a validcard is swiped is set asfollows: Swipe this card; thereader will bleep; wait for therequired period; swipe thecard again; the bleeping will stop.Fail open release card - Compact systems are fail closed as defaultNOTE: THIS CARD CAN ONLY BE USED WITH A FAIL OPEN LOCK1. Take the fail open release function card from the starter pack2. Swipe the card through  the reader. The reader will beep for about a second3. The reader is now set to fail open mode. This allows safe operation of the door in case of re: The lock will release when the power is cut4. To revert to fail closed mode, swipe the card again and the reader will bleep once more.1 2 3 4BEEP!BEEP!Fail open release cardThis card is used with systems where a fail openelectric release is used for safe operation in the event of a fire. Swipe the card through the reader to drive a fail openrelease or maglock. Swipe the card again to revert to failclosed operation.  Fail open release cardThis card is used with systems where a fail openelectric release is used for safe operation in the event of a fire. Swipe the card through the reader to drive a fail openrelease or maglock. Swipe the card again to revert to failclosed operation.  Fail open release cardThis card is used with systems where a fail openelectric release is used for safe operation in the event of a fire. Swipe the card through the reader to drive a fail openrelease or maglock. Swipe the card again to revert to failclosed operation.
Voltage1 10,0001 1001 sec 60 secs1 21 3yes    yesyesyes11v DC   14v DC30mA1A-20 °C  (-4 °F) +55 °C  (+131 °F)IPX7P38 1 1/2 inch 3 inch 1/2 inchP50 2 inch 4 inch 5/8 inchP75 3 inch 5 1/2 inch 5/8 inchSpecicationsOperating temperatureElectricalEnvironment DimensionsMin MaxWidth Height DepthCurrentOutdoor Use FeaturesDoor open timeNumber of Packs Time zones (with additional time clock)Silent operationCan be used with fail OPEN locksCan be used with fail CLOSED locksExit button input WaterproofNumber of UsersAccess levels (Colour Zones)Switchable currentFCC ComplianceThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment.

Navigation menu