Paten Wireless Technology PT-2000-6789 Cordless Mouse User Manual Manual

Paten Wireless Technology Inc. Cordless Mouse Manual

Manual

1Paten’s Fantasy Mouse Operation GuideTable of Contents1. Basic Operation Function of the Mouse2. The Component List of the Product3. Specification4. The Wheel Function Provided by the Program Driver5. Introduction to the Appearance of the Mouse and the Receiver6. Basic Installation of the Mouse7. Installation of the Program Driver8. Introduction to the Special Function of the Program Driver9. Hardware Maintenance and Simple Debugging10. Installation Configuration and Troubleshooting11. Customer Technical Service SupportImportant Ergonomic SuggestionAccording to the experts, operating a device such as a mouse in the same posture for along time easily makes some parts of our body such as hand, wrist, and shoulderuncomfortable. They suggest users to stand up and stretch their body after operatingthe mouse for a certain period of time (40-60 minutes). In addition to reducing thedamage by use of palm rest, frequently changing the posture of operating the mouse,maximizing the utility of all functions provided by the utility program, and reducingthe repeatedly operation movement can prevent the damages such as wrist tunnelsymptoms and tendonitis.Essential Rights and ObligationsThe program driver provided has copyright. It is a dedicated product to go with the“Paten’s Fantasy Mouse” and prohibited for selling the product by itself.
2Basic Operation Function of the MousePaten’s Fantasy Mouse is the most recently launched cordless wheel mouse, whichsupports as many as 13 sets of wireless channels, its wheel button can control thehorizontal scroll and the vertical scroll, in addition it can act as a third set of buttonsor goes with the dedicated program driver and be activated as a multiple sets ofadditional functions such as zooming.The Component List of the ProductA set of cordless mouseA set of wireless receiverA program driver DISKA manualA No. 3 batterySpecificationLength x Width x Height (mm) 113 x 60 x 256Weight (g) 130Weight of Ball (g) 30Cord Length (cm) 140Interface PS/2 PortResolution (dpi) 600Number of Buttons 3 (including the wheel button)Bundled Utility/Setup Program RF Wheel Mouse 1.0The Wheel Function Provided by the Utility ProgramScroll by using cursor Configure to support the vertical and horizontalscrolls, and adjust its sensitivity.Zooming Select the specific area surrounded by pixels, andmagnified by a specific proportion.Auto scroll Freely scroll the scroll bar to browse every cornerof a document or web page.Vertical scroll functions Provide 3 additional functions of vertical scrollsupportOther functions Configure the “Backspace”, “F1” and “Delete”specific key functions, or activate the specialfunctions of “Copy” and “File Manager”, etc.
3Introduction to Appearance of Mouse and ReceiverIn addition to the two sets of buttons on the Fantasy Mouse, it offers a third set ofwheel keys, and a set of lights in front of the wheel keys to remind the users for thelow level of the battery. The wireless receiver has a set of buttons, in addition it alsohas a set of simple LED and two sets of lights, such LED shows in hexadecimal 0-Findicating the current channel used to the user.Basic Installation of the MouseIn addition to plugging the PS/2 connector of the wireless receiver to the PS/2 socketof the main computer system (it should be done before power on), we still need toremember to put a No. 3 battery in the battery slot in the bottom of the mouse due tothe wireless signal transmission requires electric power for proper operation.Switching Wireless ChannelSince the Fantasy Mouse can support a total of 13 wireless channels, users can selecttheir channels by themselves. To switch channels, we need to simultaneously pressthree sets of buttons (including the wheel). When the other set of lights are lit, we canstart to change channels. Then press the right button to switch channels, and thechannels are changing in the hexadecimal sequence from 0 to F. After the selectioncompletes, press the left button to start using such channel for operation.Insufficient Battery Indicating LightThe light disposed in the front of the wheel button will be lit automatically when thevoltage of the battery in the mouse is lower than the output signal 1.1V. It remindsthe users to replace new battery.
4Installation of Utility ProgramThe provided utility program RF Wheel Mouse 1.0 can be used to install theprogram drivers, and it also can provide additional functions. After the properinstallation of the mouse, insert the program driver disk into the floppy disk drive, andpress “SETUP” icon to start the installation.STEP 1:First you will see the screen of the RF Wheel Mouse 1.0 software copyrightannouncement.STEP 2:Choose to install the Chinese or English version of the program drivers and utilityprogram.STEP 3:Install the program according to personal needs to a designated directory (you canchange the directory for the installed programs by yourself.)Introduction to Special Functions of the Utility ProgramSuch program driver will be merged into the “mouse setup” function of the controlpanel, and add two sets of functions “Scrolling” and “Press Button” to the menu.Scrolling FunctionIt mainly offers the two functions “scrolling modes” and “vertical scroll speed”. Inthe scrolling modes, it provides the commonly executed program for the users. Whenthe program supports the vertical wheel function of the “Intelli-Mouse” system, itprovides a smoother scroll, but it will be disabled for the supporting programs. Thevertical scroll speed supports the vertical scroll bar for a specific rows and pageswhen the wheel is rolling. (Users can specify the number of rows per scroll.)“Button” FunctionIt mainly provides the support functions of the middle wheel. Since the programdriver supports the functions of the 4-key mouse, the configuration of the 4th set ofbuttons has no function. We only need to choose the selection of the supportingfunctions of the 3rd button. After pressing the “SELECT”, the functions provided areas follows:Scroll by Using CursorIt provides users a way to set up the wheel to support the vertical scroll and thehorizontal scroll according to the requirement of executed program, and also tochange its sensitivity according to personal preference.ZoomingAfter the user presses the wheel, the program will magnify the area where the cursoris according to the specified pixel size in rectangular area and in specified proportion.It provides users a better view for observing smaller area.Auto ScrollAfter pressing the button, the cursor will change to a specific symbol and provide
5users to scroll the vertical and horizontal scroll bars to browse every corner of thedocument and web page. It is very useful for users who frequently view a wide rangeof a document.Complimentary Function of the Vertical ScrollingIt provides 3 types of additional functions to the vertical scroll including Zooming ofthe Office 97 documents, shift key to lock and switch the vertical scroll to horizontalscroll, which is very suitable for those users using this specific function.Other FunctionsAfter pressing the middle wheel, it can support 37 sets of buttons and functions in themenu, and can be set as the user-defined keys. Among them, it includes the specialkeys of “Backspace”, “F1”, and “Delete” or activates the special functions of “Copy”and “File Manager”.Hardware Maintenance and Simple DebuggingIf the mouse does not move smoothly, you should clean the rolling ball and the rollingaxial portion in the mouse.1. Open the cover of the rolling ball, take the ball out, wipe with a clean cloth. Openthe cover of the rolling ball by turning it in the anti-clockwise direction.2. There are three sets of rolling axes in the space of the rolling ball. Remove thedust or any other miscellaneous matter by using a Q-tip. Dip the Q-tip in alcoholfor the effective cleaning if it is not easy to remove the dust.3. Put the rolling ball back in to its original position after completing the cleaning.Installation Configuration and TroubleshootingIf the cordless mouse cannot be installed or used, try the following steps for thetroubleshooting.1. Make sure the PS/2 connector of the wireless receiver is properly installed to thesocket of the main system of the computer. And observe the surrounding of themouse receiver whether or not there is any other electronic device that mayinterfere the wireless transmission.2. Make sure that the mouse is the correct model, and it has at least a minimumamount of electricity in the battery.3. Keep the distance between the receiver and the mouse in a meter (the maximumis 1.5 m.). If there are other interferences, the transmission distance will beshortened. We can change to other channels to resolve this problem.4. If the working desktop is a metallic surface, then the transmission distance will be
6shortened.5. When we need to reconfigure channels, press the “RESET” key disposed at thebottom of the mouse, and at the same time press the button on the receiver, thechannel will automatically select Channel “0”.Customer Technical Service SupportWhen you have purchased the Fantasy Mouse, regardless of having the installation orconfiguration problems, please refer to this manual. If you still cannot solve theproblem, please contact us via telephone, facsimile, or E-mail.TEL:2627-1353FAX:2627-1352E-MAIL:paten@ms15.hinet.netThis equipment has been tested and found to comply with the limits for a class BDigital Device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates, use and can radio frequency energy and, if not installedand used in accordance with the instruction may cause harmful interference will notoccur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures:---Reorient or relocate the receiving antenna.---Increase the separation between the equipment and receiver.---Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.---Consult the dealer or an experienced radio / TV technician for help.

Navigation menu