Panasonic of North America DMC-TZ50 Digital Still Camera User Manual DMC TZ50 P37 En indd

Panasonic Corporation of North America Digital Still Camera DMC TZ50 P37 En indd

UserManual.wiki >

Panasonic of North America >

DMC-TZ50 User Manual >

Contents

1. manual 1
2. manual 2

manual 2

WIRELESSBefore connecting, operating or adjusting this product, please read the instructions completely.PFor USA assistance, please call: 1-800-211-Pana(7262) or, contact us via the web at: http://www.panasonic.com/contactinfoVQT1R37Model No. DMC-TZ50Operating InstructionsDigital Camera Wi-Fi modePanasonic Consumer Electronics Company, Division of Panasonic Corporation of North AmericaOne Panasonic Way, Secaucus, NJ 07094Panasonic Puerto Rico, Inc.Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario, L4W 2T3© 2008 Matsushita Electric Industrial Co., Ltd.PVQT1R37M0308KZ0

2 3FCC RF Exposure StatementThe available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. DMC-TZ50 has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. Please refer to the SAR test report that was uploaded at FCC website. This device should not be co-located or operated in conjunction with any other antenna or transmitter.FCC Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.FCC caution: To maintain compliance with FCC regulations, shielded interface cables must be used with this equipment. Operation with non-approved equipment or unshielded cables may result in interference to radio and TV reception. Any changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received,including interference that may cause undesired operation.The unit which can be connected to PC or which has a USB terminal: You have to indicate the following before Responsible Party. Declaration of Conformity Trade Name: Panasonic Model No.: DMC-TZ50Responsible Party:Panasonic Corporation of North AmericaOne Panasonic WaySecaucus, NJ 07094Support Contact:Panasonic Consumer Electronics CompanyTelephone No.: 1-800-211-PANA (7262)

4 5Upload pictures to your web album and view with your friends‘Picasa Web Albums’ is an online album service provided by Google.Upload the pictures you have taken to your web album, using your camera’s Wi-Fi mode. You can share your pictures by sending your web album URL to your friends. You can also change your web album’s privacy setting on your computer between ‘Only people I have informed can view (Private)’ and ‘Anyone can view (Public)’. For more details, see the following website.http://xxxxxxxxxx (correct as of April 2008)Upload your pictures at home or on the moveYou can access ‘Picasa Web Albums’ using any of the following. Using T-Mobile HotSpots around townT-Mobile HotSpots can be found in stores and in areas such as stations and airports.A valid T-Mobile account (user ID and password) is needed for this service (charges apply). (A T-Mobile account is preset to your camera, but the validity period is limited.)For more details, see the following website.http://hotspot.t-mobile.com/ (Address correct as of April 2008) Using at home with a T-Mobile@HOME-compatible routerAppropriate settings (P.26) will need to be made on your camera. Using access points (home, external) other than T-MobileAppropriate settings (P.28) will need to be made on your camera when you sign up to other services.(Contact the appropriate operating companies for details on individual services.)‘Picasa Web Albums’ and ‘T-Mobile’ services may be altered at any time without prior notification.Take picturesUploadAccess using T-Mobile HotSpots around town or using T-Mobile@HOME in your home.Picasa Web AlbumsSend pictures to your web album (upload).Check your uploaded pictures (pictures can also be deleted) Send your web album’s URL to your mobile telephone or etc.URLView together Add a message and send your web album’s URL to your friends and family

6 7INDEXMain OperationsBefore useMain Operations .............................6Before Using ...................................8Wireless LAN function ..................9•BasicsWi-Fi mode basic operations .......10Entering Wi-Fi mode ...................10Exiting Wi-Fi mode ....................11Character input ...........................11Setting up a web album account ..........................................12Obtain a web album account and log in ....................................12Make account settings on your camera ........................................12Connect to web album .................15Uploading pictures to web album .....................................16View pictures in web album .........18Delete pictures from web album .....................................20Cancel connection to web album .....................................21•••••ApplicationsSend web album URL ...................22Setting e-mail address ................22Sending web album URL to e-mail address ........................23Change size of pictures to upload .......................................24Using T-Mobile@Home-compatible router .........................26Registering access point ............26Connecting to web album ...........27Using access points other than T-Mobile (home, public wireless LAN) .......28Registering access point ............28Connecting to web album ...........31Protecting Wi-Fi mode .................32Setting Wi-Fi password ...............32Changing Wi-Fi password ..........33Canceling Wi-Fi password setting .........................................34Deleting Wi-Fi information ..........35Updating T-Mobile settings ..........36Automatic connection settings ...37••••••••••OthersMessage displays .........................38Q&A ................................................40Specifications ...............................431Use your Google account (free) to log in to your Picasa Web Album on your computer, and agree to the Terms of Service (P.12).You will need to sign up for a Google account if you do not have one already (P.12).2Set your account to your camera (P.12).3Connect to your web album (P.12).• From T-Mobile HotSpots around town (P.15)• From a T-Mobile@HOME router in your home (P.26)• From other access points (P.28)If you have trouble connecting, communication may not be available in your present location, or your T-Mobile account may have expired.4Upload your pictures to your web album (P.16).5View (check) your uploaded pictures (P.19).Pictures can also be deleted (P.20).6Set a destination (e-mail address) to send the URL (P.22).You can set one e-mail address to send the URL to, such as your mobile telephone or your computer address. (This operation need not be repeated once the destination is originally set.)7Send your web album’s URL.Send the URL to the e-mail address set in step 6.You can forward this URL to your friends and view your pictures together.

8 9Before Using About this manual• Please refer to the main digital camera operating manual whenever you see references such as ‘(Main operating manual P.107)’ in this manual.• Product illustrations and screens may differ from the actual product.Using cursor buttons to select directionUp▲Down▼Left RightThe correct button to press will be shaded grey and labeled with ▲▼, as shown here. Be aware of copyrights and image rights• Pictures taken may not be used without the permission of rights holders except for individual enjoyment.• The taking of pictures even for personal usage may be subject to restrictions in some cases.• Recording and making available images of another person’s appearance without their consent may be a violation of their image rights. Personal information management and disclaimer• To protect your personal information, using ‘Setting Wi-Fi password’ (P.32) is recommended.• Always keep a copy of important information.Information containing personal information, such as wireless LAN connection settings, which has been registered or set to the product by the user, may be altered or lost through erroneous operation, static electricity, accidents, faults, repairs, or other modes of handling. Panasonic shall accept no responsibility for any direct or indirect damage or financial loss resulting from the alteration or loss of such information through no fault of its own.• Always delete personal information before relinquishing/disposing of this productWhen relinquishing or disposing of this product, always delete personal information, such as wireless LAN connection settings, which has been registered or set to the product by the user, by performing a ‘RESET Wi-Fi SET’ from ‘Wi-Fi SET’, or a ‘RESET Wi-Fi SET’ from the Setup Menu.• No compensation shall be paid in the event of damage resulting from theft or loss.Panasonic shall accept no responsibility for any demands for connection charge payment or other damage caused by illegal third party access to non-protected wireless LANs, or for any damage caused by illegal usage of e-mail addresses set to the product, which results from this product being lost or stolen. This product may not be exported to or brought into countries subject to United States export embargoes＊This product contains American-originating encryption software and is therefore subject to U.S. Export Administration Regulations (EAR). (＊ Cuba, Iran, Iraq, Libya, etc. (correct as of February 2008))Wireless LAN function Use this product as a wireless LAN devicePanasonic shall accept no responsibility for any damage caused when using this product for other purposes.• Do not use this product for uses requiring a high safety level, such as medical devices and systems which directly or indirectly support human life.• When using in devices or computer systems requiring a higher level of reliability than wireless LAN devices, ensure that sufficient and appropriate measures are taken to ensure safety and prevent damage to the system. This wireless LAN function is designed for use in the United StatesThis product’s wireless LAN function is designed for use in the United States, and cannot be used outside of the country. Attempting to use this function outside of the United States may violate related national regulations, for which Panasonic shall accept no responsibility. (Other functions may be used in other countries.) Data transmitted wirelessly may be interceptedBe aware that data transmitted wirelessly may be intercepted by third parties. Do not use in locations where interference from magnetic fields, static electricity, or electromagnetic waves is likely• Do not use in locations where interference from magnetic fields, static electricity, or electromagnetic waves is likely, such as close to microwave ovens. Wireless connection may be lost.• When using this product close to other products using frequencies of around 2.4 GHz, both products may suffer a drop in processing speed. Do not use with wireless networks for which you do not have usage authorityThis product automatically searches for wireless network environments when the wireless LAN function is used. Do not connect to any wireless networks (SSID) displayed for which you do not have usage authority, as this may be considered illegal access.

12 13Basics 2Setting up a web album accountObtain a web album account and log in• Users with Google accounts already Use your ‘Username (e-mail address)＊’ and ‘Password’ to log in to Picasa Web Albums, and agree to the Terms of Service. Make a note of your ‘Username (e-mail address)＊’ and ‘Password’ as these must be set to your camera.• Users without Google accounts Sign up for a Google account using the following URL, then use your ‘Username (e-mail address)＊’ and ‘Password’ to log in to Picasa Web Albums, and agree to the Terms of Service. picasaweb.google.com/ (correct as of April 2008) Make a note of your ‘Username (e-mail address)*’ and ‘Password’ as these must be set to your camera.Always make a note of your ‘Username (e-mail address)’ and ‘Password’.The Terms of Usage viewable during registration will be applicable when using this service. Read these terms thoroughly before usage.＊ If using a Gmail (e-mail service supplied by Google) address for your account Username (e-mail address), you can use the ‘Send web album URL’ function (P.22).Make account settings on your cameraInput your web album ‘Account’ into your camera.1Entering Wi-Fi mode (P.10)2Select ‘Wi-Fi SET’ InformationFirst of all, use a Google account (free) to log in to Picasa Web Albums and agree to the Terms of Service (see below). Without this agreement, you cannot use web albums.3Select ‘WEB ALBUM SET’4Select ‘LOGIN SET’• To return: Press [Q.MENU/ ]5When LOGIN SET screen is displayedPress [MENU/SET]6Go to input screen• To return: Press ◄7Input Username (e-mail address) and confirm(Character input → P. 11 )

14 15Basics 2Setting up a web album account (Continued)Basics 3Connect to web album8Check Username (e-mail address)Press ►• To return: Press ◄9Go to input screen• To return: Press ◄10Enter password and confirm (Character input → P. 11 )11Check password (e-mail address)Press ►• To return: Press ◄12Select ‘Yes’ when ‘CONFIRM LOGIN SET?’ is displayed, and confirm• To return: Press [Q.MENU/ ]Account settings are complete.This page explains how to connect to your web album using T-Mobile HotSpots.See www.t-mobile.com/hotspot (correct as of April 2008) for a list of T-Mobile HotSpot locations.See P.26 if using a T-Mobile@Home-compatible router, or P.28 if using access points other than T-Mobile (home, public wireless LAN).1Entering Wi-Fi mode (P.10)2Select ‘WEB ALBUM’Registered access point SSID are displayed.3Select ‘tmobile’• To return: Press [Q.MENU/ ]＊ When using public wireless LAN only＊Connection is made with your web album. Do not remove the card or turn off the power during communication. Check the ‘Q&A’ (P.40) if you have trouble connecting.

16 17Basics 4Uploading pictures to web albumSend pictures from your camera to your web album. You can upload pictures individually or several at a time. Movies and pictures with audio cannot be uploaded.Images uploaded to your web album can be displayed and deleted with your camera.1Entering Wi-Fi mode (P.10) → Connect to web album (P.15)2Select ‘UPLOAD TO WEB ALBUM3Select album to upload• To return: Press [Q.MENU/ ]• Five albums are pre-prepared.4Select ‘SINGLE SELECT’ or ‘MULTI SELECT’• To return: Press [Q.MENU/ ]• Pictures will be sent to your web album• To cancel during sending: Press • When ‘UPLOAD COMPLETED’ is displayed, press [MENU/SET] to return to the playback screen. To finish using the web album, cancel the connection (P.21). Time required for sending (approximate) (P.25) Image sizes are reduced before sending. However, pictures which have ‘TEXT STAMP’ (Main operating manual P. 73) will not be reduced. Always make back-ups of important pictures. SINGLE SELECT5Select picture and confirmDestination album name• To return: Press [Q.MENU/ ]6When ‘UPLOAD THIS PICTURE?’ is displayedSelect ‘YES’ and confirm• To return: Press [Q.MENU/ ] MULTI SELECT (up to 10)5Select picture and confirm Indicates picture is selectedDestination album name• Repeat this operation to select multiple pictures.• To return: Press [Q.MENU/ ]6When selection is completePress [MENU/SET]7When ‘UPLOAD X PICTURES TO WEB ALBUM?’ is displayedSelect ‘YES’ and confirm• To return: Press [Q.MENU/ ] Pictures taken with other cameras may not be able to be sent, even if they are viewable on this camera. Uploaded pictures may also be checked on your computer. ‘Eco mode’ (Main operating manual P. 24) will not work during picture transmission.

18 19Basics 5View pictures in web albumPictures uploaded to your web album can be viewed on your camera.1Entering Wi-Fi mode (P.10)→Connect to web album (P.15)2Select ‘DISPLAY WEB ALBUM’ 3Select the album you wish to view• To return: Press [Q.MENU/ ]4The most recent picture is displayedAlbum nameIndicates web album pictureCurrent picture/total pictures in web albumNext picturePrevious pictureMost recently updated picture is displayed (only one picture can be displayed at a time).• To scroll quickly:Hold down Only picture numbers will scroll - release button when desired picture number is reached. To cancel display1While picture is displayedPress [MENU/SET]• To return: Press [Q.MENU/ ]Menu is displayed.2 Select ‘EXIT’• To return: Press [Q.MENU/ ]Return to step 3. To finish using the web album, press [Q.MENU/ ] to return to the web album menu, and select ‘DISCONNECT’ (P.21). In some cases, only pictures taken with this camera may be viewable.

20 21Basics 6Delete pictures from web album Basics 7Cancel connection to web albumYou can use your camera to delete pictures uploaded to your web album.1Entering Wi-Fi mode (P.10)→Connect to web album (P.15)→View pictures in web album (P.18)2While picture is displayedPress [MENU/SET]• To return: Press [Q.MENU/ ]Menu is displayed.3Select ‘DELETE PICTURE’• To return: Press [Q.MENU/ ]4When ‘DELETE PICTURE ON WEB ALBUM?’ is displayedSelect ‘YES’ and confirm• To return: Press [Q.MENU/ ]Pictures will be deleted from your web album.Press [MENU/SET] when ‘IMAGE DELETED’ is displayed to return to picture displays. To finish using the web album, cancel the connection (P.21). Pressing [MENU/SET] during deletion will cancel the communication, but pictures may have been deleted already.Cancel the connection to your web album.1Entering Wi-Fi mode (P.10)→Connect to web album (P.15)2Select ‘DISCONNECT’ Always disconnect when you have finished using the web album. Depending on your contract details, you may be charged if the camera is left connected for long periods.

22 23Applications 1Send web album URLSend your web album URL to a designated e-mail address. Only one address may be used at a time, but mobile telephone addresses are compatible.You can, for example, send the URL to your own mobile telephone, before adding your own comments and forwarding it on to others.The e-mail sent will contain URLs both for your web album and for pictures.By accessing the web album URL, you can see all of the pictures in the album.You can also let others see your pictures immediately just by sending the URL.This function can only be used if a Gmail (e-mail service supplied by Google) address has been set as your Google account (P.12) Username (e-mail address).Setting e-mail addressAnyone that knows the URL can browse your pictures. Check that the address you have set is correct. (No error messages will be displayed or sent if e-mail addresses entered are incorrect.)1Entering Wi-Fi mode (P.10)2Select ‘Wi-Fi SET’3Select ‘WEB ALBUM SET’• To return: Press [Q.MENU/ ]4Select ‘E-MAIL SET’• To return: Press [Q.MENU/ ]5When E-MAIL SET screen is displayedPress [MENU/SET]6Go to input screen• To return: Press ◄7Enter e-mail address and confirm(Character input → P. 11 )8Check e-mail address andPress ►9When ‘CONFIRM E-MAIL SET?’ is displayedSelect ‘YES’ and confirm• To return: Press [Q.MENU/ ]Sending web album URL to e-mail address1Entering Wi-Fi mode (P.10)→Connect to web album (P.15)→View pictures in web album (P.18)2While picture is displayedPress [MENU/SET]Menu is displayed.3Select ‘SEND URL’4When ‘SEND PICTURE URL LINK TO YOUR E-MAIL?’ is displayedSelect ‘YES’ and confirmWeb album URL will be send to previously set address.To cancel sending: Press [MENU/SET]When ‘E-MAIL SENT’ is displayed, press [MENU/SET] to return to the web album menu. To finish using the web album, cancel the connection (P.21). The Gmail SMTP server is used to send e-mails.

24 25Applications 2Change size of pictures to uploadChange the size of pictures before sending them to your web album. Larger pictures have better quality but take longer to send.With the default settings, pictures with 4:3 aspect ratios are reduced to 3M, 3:2 to 2.5M, and 16:9 to 2M before sending.1Entering Wi-Fi mode (P.10)2Select ‘Wi-Fi SET’3Select ‘WEB ALBUM SET’• To return: Press [Q.MENU/ ]4Select ‘UPLOAD PICTURE SIZE’• To return: Press [Q.MENU/ ]5Select ‘RESIZE’ or ‘ORIGINAL’‘RESIZE’ : Reduce picture size‘ORIGINAL’ : Send in original size 6(When ‘RESIZE’ selected)Select size and confirm• To return: Press [Q.MENU/ ]Pictures of larger sizes will be reduced to the selected size before sending.Pictures of smaller sizes than that selected will not be resized.Time required to send one picture (estimated)Picture size Connection speed Sending time7M6M5.5M5M4.5M3M2.5M2M0.3M• Depending on connection conditions, sending ten pictures will take approximately ten times as long. Pictures which have ‘TEXT STAMP’ (Main operating manual P. 73) will not be reduced.

26 27Applications 3Using T-Mobile@Home-compatible routerConnect to your web album using a T-Mobile@Home-compatible router.Read your router’s operating instructions thoroughly.Registering access point If entering manually1Entering Wi-Fi mode (P.10)2Select ‘Wi-Fi SET’3Select ‘ACCESS POINT SET’4Select ‘T-Mobile ACCESS POINT’5Select ‘T-Mobile HotSpot@HOME’6Press your router’s security buttonConnecting to web album(1) Perform step 1 and 2 on P.15(2) Select desired access point in step 3 on P.15Not decided

28 29Applications 4Using access points other than T-Mobile (home, public wireless LAN)Connect to your web album using access points other than T-Mobile.First, register your access point, then select it from the list to connect.Registering access pointYou can register up to eight access points, including the ‘tmobile’ which comes preset.1Entering Wi-Fi mode (P.10)2Select ‘Wi-Fi SET’3Select ‘ACCESS POINT SET’4Select ‘OTHER ACCESS POINT’5Select desired access pointUnregisteredRegistered (public Wi-Fi LAN)Registered (home)To enter manually• To return: Press ◄• To scan again: Press [DISPLAY]• To change page: Turn zoom lever• To enter ‘SSID (network name)’ and ‘encryption key’ (distributed by provider or network administrator) manually: Select ‘MANUAL INPUT’• To enter automatically: Select an unregistered access point6Select access point type• To return: Press [Q.MENU/ ]7Check SSID (network name) andPress ►• To change SSID → Character input (P.11)• To return: Press ◄Skip to step 10 unless using ‘MANUAL INPUT’.8Select network certificate type (only displayed in ‘MANUAL INPUT’)• To return: Press ◄Network certificate Available encryptionOPEN WITHOUT ENCRYPTION, or WEPSHARED KEY WEPWPA-PSK TKIP / AESWPA2-PSK TKIP / AESSelecting options other than ‘WITHOUT ENCRYPTION’ in ‘OPEN’ is recommended, to protect personal information.9Select encryption type (only displayed in ‘MANUAL INPUT’)• To return: Press ◄(Screen displayed if ‘Open’ selected in step 8)

30 31Applications 4Using access points other than T-Mobile (home, public wireless LAN) (Continued) When selecting ‘HOME Wi-Fi LAN’ in step 610Go to input screen• To return: Press ◄• This step is skipped if ‘WITHOUT ENCRYPTION’ is selected in step 9.11Enter encryption key and confirm (Character input → P. 11 )12Check encryption key andPress ►13When ‘REGISTER SETTINGS?’ is displayedSelect ‘YES’ and confirm• To return: Press [Q.MENU/ ]Access point is registered. When selecting ‘PUBLIC Wi-Fi LAN’ in step 610Go to input screen11Enter user ID and confirm (Character input → P. 11 )12Check user ID andPress ►13Go to input screen14Enter password and confirm (Character input → P. 11 )15Check password andPress ►16When ‘REGISTER SETTINGS?’ is displayedSelect ‘YES’ and confirmAccess point is registered.Connecting to web album(1) Perform step 1 and 2 on P.15(2) Select desired access point in step 3 on P.15

32 33Applications 5Protecting Wi-Fi modeSetting a password is recommended, to avoid Wi-Fi usage through erroneous operation or by third parties, and to protect your personal information.Always remove Wi-Fi information when relinquishing or disposing of your camera, so that your personal information is not used by others.Setting Wi-Fi passwordMake password entry necessary when entering Wi-Fi mode.1Entering Wi-Fi mode (P.10)2Select ‘Wi-Fi PASSWORD SET’3Select ‘SET PASSWORD’• To return: Press [Q.MENU/ ]4When ‘INPUT NEW PASSWORD.’ is displayedPress [MENU/SET]5Enter password and confirm (Character input → P. 11 )6When ‘INPUT NEW PASSWORD AGAIN.’ is displayedPress [MENU/SET]7Enter password again and confirm (Character input → P. 11 ) Always make a note of your password. If you forget your password, you can reset it by performing a ‘RESET Wi-Fi SET’ from the Setup Menu (Main operating manual P.25), but settings information for access points other than ‘tmobile’ (user ID, password, etc.) will also be reset. (‘tmobile’ settings will be reset to default.) Changing Wi-Fi passwordChange your current password.8When ‘Wi-Fi PASSWORD SET.’ is displayedPress [MENU/SET]Password is set. To enter Wi-Fi mode with password protection(1) Perform steps 1-4 on P.10(2) When ‘INPUT MODEPASS’ is displayed, press [MENU/SET](3) Select characters with ▲▼◄► and confirm with [MENU/SET]. Repeat to enter whole password and press [MENU/SET]After steps 1-3 on left4When ‘INPUT CURRENT PASSWORD.’ is displayedPress [MENU/SET]After step 5 on left6When ‘INPUT NEW PASSWORD.’ is displayedPress [MENU/SET]Perform steps 5-8 on left.

34 35Applications 5Protecting Wi-Fi mode (Continued)Canceling Wi-Fi password settingAfter step1 and 2 on P.323Select ‘CANCEL PASSWORD’• To return: Press [Q.MENU/ ]4When ‘INPUT CURRENT PASSWORD.’ is displayedPress [MENU/SET]5Enter current password and confirm (Character input → P. 11 )6When ‘Wi-Fi PASSWORD CANCELED.’ is displayedPress [MENU/SET]Deleting Wi-Fi informationDelete Wi-Fi information from your camera.Always delete Wi-Fi information before relinquishing or disposing of your camera to ensure that your personal information is not erroneously used by others. Settings information for access points other than ‘tmobile’ (user ID, password, etc.) will also be reset. (‘tmobile’ settings will be reset to default.)1Entering Wi-Fi mode (P.10)2Select ‘Wi-Fi SET’3Select ‘RESET Wi-Fi SET’• To return: Press [Q.MENU/ ]4When ‘DELETE ALL Wi-Fi RELATED DATA FOR THIS CAMERA?’ is displayedSelect ‘YES’ and confirm5When ‘ALL Wi-Fi RELATED DATA HAS BEEN RESET FOR CAMERA.’ is displayedPress [MENU/SET]

36 37Applications 6Updating T-Mobile settings Applications 7Automatic connection settings If multiple access points have been set to ‘ON’, the camera will connect to the one with the strongest reception. If connection could not be established automatically, a list of the available access points will be displayed for you to select from.After purchasing a new T-Mobile HotSpot account, it is necessary to update the account settings on your camera.1Entering Wi-Fi mode (P.10)2Select ‘Wi-Fi SET’3Select ‘ACCESS POINT SET’• To return: Press [Q.MENU/ ]4Select ‘T-Mobile ACCESS POINT’5Select ‘T-Mobile HotSpot’• To return: Press [Q.MENU/ ]6Go to input screen7Enter user ID and confirm (Character input → P. 11 )8Check user ID andPress ►9Go to input screen10Enter password and confirm (Character input → P. 11 )11Check password andPress ►12When ‘REGISTER SETTINGS?’ is displayedSelect ‘YES’ with ▲ and confirm with [MENU/SET]Designate the registered access points you use mode often to enable automatic connect without the need to select the access point.1Entering Wi-Fi mode (P.10)2Select ‘Wi-Fi SET’3Select ‘AUTO CONNECT SET’• To return: Press [Q.MENU/ ]4Select an access point• To return: Press [Q.MENU/ ]5Select ‘ON’

38 39Others Message displays Meanings and ways to respond to the main messages displayed on the LCD monitor.Message RemarksAUTO SET WAS FAILED. PLEASE CHECK THE HOME ROUTER SETTINGS.Check and update the access point settings.ACCESS POINT CONNECTION WAS FAILED.• The access point information set to your camera is incorrect. Check the certificate format, the encryption format, and the encryption key.• Reception is weak. Try moving closer to the access point.• The access point is switched off.• The access point selected is not supported by this camera.CONNECTION WAS FAILED.CANNOT DISPLAY Picture cannot be played back on this camera.CANNOT SEND E-MAIL• The selected picture does not exist.• Destination e-mail address is incorrect. Check the destination e-mail address.• Could not establish communication. Try again later.DISCONNECTED Reception is weak. Try moving closer to the access point.FAILED TO COMMUNICATE• Reception is weak. Try moving closer to the access point.• No response from the server, or communication has timed out. Try again later.FAILED TO DELETE IMAGE The picture you have tried to delete does not exist.FAILED TO LOGIN• Public wireless LAN ID and/or password are incorrect.• This public wireless LAN service may not be supported on this camera.IP ALLOCATION WAS FAILED.• The access point DHCP server is not working.• There is no response from the access point. Check the access point settings.Message RemarksLOGIN ERROR: ACCOUNT EXPIRED OR INVALID. CONTACT T-Mobile HotSpot @ 877-822-SPOTYour T-Mobile ID/password usage period has expired. Input a valid ID/password into your camera (P.36).LOGIN ID/PASSWORD AUTHORIZATION FAILED.Check web album login ID and password.MAXIMUM NUMBER OF IMAGE UPLOADS REACHED.• Upload your pictures to a different album.• Delete any unneeded pictures (P.20).MAXIMUM STORAGE SPACE REACHED ON WEB ALBUM.Delete any unneeded pictures (P.20).NO PICTURE TO DISPLAY There are no pictures in your web album.PLEASE SETACCESS POINT.Make access point settings in ‘Wi-Fi SET’ → ‘ACCESS POINT SET’.WEB ALBUM NOT FOUNDTry again. If your album still cannot be found, it may have been deleted.

40 41Others Q&AProblem RemarksAccess PointI cannot register access pointsHas the maximum number of access points been reached? (Maximum of 8 access points, including default ‘tmobile’)I want to use my camera without encryptionAs data is sent wirelessly, the possibility of interception cannot be avoided. Using encryption is recommended.I have forgotten my web album passwordSee the following URL for a guide to password reissues from Picasa Web Albums.picasaweb.google.com/ (correct as of April 2008)No access points are displayed. I cannot connect to an access point• If you are suddenly unable to use T-Mobile HotSpots having successfully used them before, it is possible that your user ID usage period has expired. Purchase a T-Mobile HotSpot account and make the appropriate settings on your camera to use the service again. Contact T-Mobile for details. (Updating settings → P.36)• Check that the access point you wish to connect to is currently open for use.• Access points may not be displayed if reception is poor.• Depending on their settings, some access points may not be displayed even if reception is available. Check the access point settings.• Try the following - Bring the camera (particularly the antenna grip part) closer to the access point - Remove any obstacles between the camera and the access point - Point the camera in different directionsI want to swap between the card and the internal memory when sending picturesYou cannot swap between the card and the internal memory during communication. You can only use the card (or internal memory) in use when communication with the access point is established.Pictures cannot be sent to/displayed in/deleted from my web albumIt is possible that the web album server or the connection line is busy. Try again later.Web AlbumProblem RemarksSending pictures to my web album takes a long timeAre your pictures particularly large?Resize your pictures using ‘Change size of pictures to upload’ (P.24).I cannot see my web album any moreIf you change the name of your web album via your computer, you will be unable to view it with your camera. You can still view it with your computer.Older pictures are displayed first when viewing web album picturesThe date of pictures edited on your computer will be the date of editing, not the date the pictures were taken.Display orders may be affected by web album picture management rules.I want to change my web album ‘Private’/‘Public’ settingsYour web album can be set to either ‘Only people I have informed can view (Private)’ or ‘Anyone can view (Public)’, but this setting cannot be changed via your camera. Change the setting with your computer.E-mails containing the URL are not delivered/I cannot send e-mails• Check that the e-mail address has been set correctly (P.22).• This function can only be used if a Gmail (e-mail service supplied by Google) address has been set as your Google account (P.12) Username (e-mail address).I can only select one picture to send, even when using ‘MULTI SELECT’Web album picture or data capacity is full.Delete unneeded pictures from your web album (P.20).OthersI have forgotten my Wi-Fi mode passwordPerform a ‘RESET Wi-Fi SET’ from the Setup Menu. Note that Settings information for access points other than ‘tmobile’ (user ID, password, etc.) will also be reset. (‘tmobile’ settings will be reset to default.) I want to know my camera’s MAC addressSelect ‘Wi-Fi SET’ → ‘DISPLAY MAC ADDRESS’.(MAC address: Globally unique identification codes given individually to each network device - in this case the camera.)Web Album

42 43Others Q&A (Continued) Others SpecificationsWireless transmitterStandards IEEE 802.11 b/g (standard wireless LAN protocol)ARIB STD-T66 (low power data transmission system standards)Communications protocolsIEEE 802.11g: OFDMIEEE 802.11b: DSSSCommunication distance (approximate)Approx. 50 m (may be affected by obstacles and weather conditions)Frequency range (center frequency) 2412-2462 MHz (11 channels)Data transmission speeds (standard values)IEEE 802.11g: 54M/48M/36M/24M/18M/12M/9M/6M (bps)IEEE 802.11b: 11M/5.5M/2M/1M (bps)Security 128/64 bit WEP, TKIP, AESAccess format Infrastructure modeEstimated maximum battery life (with fully-charged battery): 00 hours 00 minutes(Battery life is affected by signal reception, usage conditions, and usage environment)Usage environment memoContract providerContract broadband serviceModem ManufacturerProduct nameCourse/planIP telephone contract Yes/NoCondo-type contract Yes/No

44 45This product contains thttpd software developed by ACMELabs, which is used subject to the following license conditions.Copyright 1995,1998,1999,2000 by Jef Poskanzer <jef@acme.com>.All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.This product contains OpenSSL software developed by OpenSSL Project, which is used subject to the following license conditions.LICENSE ISSUESThe OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.OpenSSL LicenseCopyright (c) 1998-2004 The OpenSSL Project. All rights reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. All advertising materials mentioning features or use of this software must display the following acknowledgment:"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org.5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.6. Redistributions of any form whatsoever must retain the following acknowledgment:"This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

46 47This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com).Original SSLeay LicenseCopyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)All rights reserved.This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).The implementation was written so as to conform with Netscapes SSL.This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. All advertising materials mentioning features or use of this software must display the following acknowledgement:"This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)"The word 'cryptographic' can be left out if the rouines from the library being used are not cryptographic related :-).4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:"This product includes software written by Tim Hudson (tjh@cryptsoft.com)"THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]