Panasonic Mobile Communications 611849144431A RRH4x40-PCS KS24829L11 User Manual

Panasonic Mobile Communications Co., Ltd. RRH4x40-PCS KS24829L11

User Manual

PCS RRH List11 Installation Guide Issue: 1.0.0 1/17 PMC CONFIDENTIAL PCS RRH List11 Installation Guide Product Name : RRH4x40-PCS KS24829L11 Model Number : 849144431 Issue: 1.0.0 Date; July 21, 2011
PCS RRH List11 Installation Guide Issue: 1.0.0 2/17 PMC CONFIDENTIAL Revison History Issue No. Description Date 1.0.0 First edition July 08, 2011
PCS RRH List11 Installation Guide Issue: 1.0.0 3/17 PMC CONFIDENTIAL Table of Contents Revison History ..................................................................................................................................... 2 Table of Contents ................................................................................................................................... 3 1 INTRODUCTION ............................................................................................................................. 4 1.1 System Overview ...................................................................................................................... 4 1.2 Equipment Outline .................................................................................................................... 5 1.3 Structural Outline ...................................................................................................................... 6 1.4 Specification ............................................................................................................................. 7 1.4.1 System Specification .......................................................................................................... 7 1.4.2 Optical Module Specification .............................................................................................. 8 1.4.3 PCS Band Remote Radio Heads Specification ................................................................... 9 2 Installing the RRH ......................................................................................................................... 10 2.1 Appearance ............................................................................................................................ 10 2.2 User Interface ......................................................................................................................... 11 2.3 Cable List ............................................................................................................................... 13 2.4 Power cable installing procedure ............................................................................................ 14 2.5 Powering On the RRH ............................................................................................................ 16 2.6 System Start-Up Procedure .................................................................................................... 16 3 FCC WARING ............................................................................................................................... 17
PCS RRH List11 Installation Guide Issue: 1.0.0 4/17 PMC CONFIDENTIAL 1 IN TRODUCTION 1.1 S ystem Overview PCS R RH List11 co nnect w ith BBU w hich made by Alcatel -Lucent. An d, this RR H is transiver system which is support LTE and CDMA fuction in 1900MHz frequency band range. List11 consist from 2pcs of List10 whch is connected by optical cabel. CPRI Interface of one PCS RRH List10 connect to BBU (LTE) Another one CPRI interface connect to BBU (CDMA) BBU（LTE)BBU（CDMA)PCS RRHTX25MHｚList10PCS RRHTX25MHｚList10CPRIPCS RRH List11 Figure 1-1 System Overview
PCS RRH List11 Installation Guide Issue: 1.0.0 5/17 PMC CONFIDENTIAL 1.2 Equipment Outline Figure 1-2 Equipment Outline ① Execute transmit and receive BBU and UL/DL Digital Signal by optical interface ② Enable to maintain RRH with O CI (On site Confi guration Inte rface) an d Pe rsonal Computer. ③ Enable to use Alarm-interface detect function(one is moni toring. another is detection for 2pcs List10) ④ AISG suppl y an d contr ol po wer function w hich is connec ted to towe r-top e quipment from RRH ⑤ This system support DC -48 Vpower input ⑥ Execute sever al fun ctions (S tatus-Control/Tranciver-Control/Mesurement/Failure -Control…) based on control message of BBU. ⑦ Enable to download Software(Control Software, DSP Firmware、FPGA Data) as Remotely. BBU （LTE)BBU （CDMA) PCS RRHTX25MHｚList10PCS RRHTX25MHｚList10CPRICPRICPRITower-topEquipmentAISGDC - 48VOCI（ Ether）Alams MonitorAlamsIdentification connectorDC - 48VPrimaryPrimarySecondarySecondaryPCS RRH List11
PCS RRH List11 Installation Guide Issue: 1.0.0 6/17 PMC CONFIDENTIAL 1.3 S tructural Outline 【Structure Outline】 ① 1system(List11) consist from 2pcs of RRH（List10） ② Thermal method is naturally air‐cooled engine(Cooling Fan Less) ③ Enable to l oad next ca ble (P ower Cable/Optical C able/AISG Ca ble/ALM Ca ble/AUX Cable) from bottom side of the RRH. And, enable to load Antenna Cable from Upper side of the system ④ Equipped M6 electrical ground in lower side of the system ⑤ In order to monitoring output power of transmi ssion point, Implement 2pcs (List10) of electrical terminal. ⑥ There are installing “Water proof cap” and “Dust Proof Cap” as external connector ⑦ There are LED in bottom side of the RRH which can monitoring system status. ⑧ All function can control by control box which box can be open ⑨ Enable to install “ibolt” to upper side of the system
PCS RRH List11 Installation Guide Issue: 1.0.0 7/17 PMC CONFIDENTIAL 1.4 S pecification 1.4.1 S ystem Specification No Item Content Remark 1 Input Power -48V (-37V～-57V) 2 Powe r Consumption 340.7W x2 3 W eight Less than 20kg 4 Water resistant level IP65 as specified by IEC529 IP66 as specified by IEC60529 NEMA type4 5 T emperature range -40～+55℃ 6 Humi dity range 5～95% 7 Dime nsion W：330 mm D：176 mm H：530 mm （ not include connectors ） 8 Thermal Type naturally air cooled engine 9 Setting Location Outside
PCS RRH List11 Installation Guide Issue: 1.0.0 8/17 PMC CONFIDENTIAL 1.4.2 Optical Module Specification No Item Condition/etc Remark 1 Optical Center Length ＜Primary port＞ DL：1550 nm、UL：1310 nm ＜Secondary port＞ Mix mode：1550 nm/1310 nm RRH1:1550 nm, RRH2:1310 nm or RRHq:1310 nm, RRH2:1550 nm 2 Bit Rate ＜Primary port＞ CDMA：0.6144 Gbps～1.2288 Gbps LTE ：1.2288 Gbps～6.1440 Gbps ＜Secondary port＞ 2.4576 Gbps～6.144 Gbps 3 Transmission Distance ＜Primary port＞ Maximum 20 km ＜Secondary port＞ Maximum 50m
PCS RRH List11 Installation Guide Issue: 1.0.0 9/17 PMC CONFIDENTIAL 1.4.3 PCS Band Remote Radio Heads Specification No Item Type Remark 1 Supp ort Technologies LTE/CDMA 2 RF Output Power 40W/Branch×2×2 List11 co nsist fr om 2pcs of List10 3 Downlink RF Frequency 1930 MHz –1995 MHz 4 Uplink RF Frequency 1850 MHz –1915 MHz 5 Numb er of Carrier LTE ：2Carrier×2 CDMA：8Carrier×2 List11 co nsist fr om 2pcs of List10
PCS RRH List11 Installation Guide Issue: 1.0.0 10/17 PMC CONFIDENTIAL 2 Installing the RRH 2.1 Appe arance Figure 2-1 Appearance of the RRH with connector covers (There are 2-M8 female threads on opposite side) 4-M8 female threads for Equipment mounting 4-M6 female threads for Ground Lugs (There are 2-M6 female threads on opposite id )
PCS RRH List11 Installation Guide Issue: 1.0.0 11/17 PMC CONFIDENTIAL 2.2 U ser Interface Figure 2-2 User Interface (Top view) Figure 2-3 User interface (Bottom view) Figure 2-4 Detail of Service Access Ports (1) (2) (8)(3) (4) (5) (6)(7)(10) (11)(12) (13)(9)(14)(15) (16) (17) (19) (18)
PCS RRH List11 Installation Guide Issue: 1.0.0 12/17 PMC CONFIDENTIAL Table 2-1 Connectors, LED, Reset button etc. No. Location Connector Name Connector Type and Comment 1 On the Top TX/RX 1 7/16 DIN F 2 TX/RX 2 7/16 DIN F 3 On the Bottom AUX RX1 N-type F 4 AUX RX2 N-type F 5 CPRI PRI SFP Connector Tyco Electronics 1888247-1 SFP Shield Cage Tyco Electronics 2007198-1 Flange Connector SFP with Waterproof Radial Part# R299.988.00 6 CPRI SEC SFP Connector Tyco Electronics 1888247-1 SFP Shield Cage Tyco Electronics 2007198-1 Flange Connector SFP with Waterproof Radial Part# R299.988.00 7 Status LED Indicate green or red or yellow 8 AISG Female 8-pin circular connector, per IEC 60130-9 9 External User Alarms 1-4 Female 8-pin circular connector, per IEC 60130-9 10 DC -48V IN Water-proof entry connector can be mounted 11 V entilator 12 TX MON 1 SMA F 13 TX MON 2 SMA F 14 Service access door 15 Service access Port on the Bo ttom of the RRH Serial Interface IEEE1394 16 OCI (Ethernet) RJ45 17 Reset button - 18 Domestic Port 1 19 Sensor for service access door
PCS RRH List11 Installation Guide Issue: 1.0.0 13/17 PMC CONFIDENTIAL 2.3 Cable List 1. Power cable; # 14 AWG strand wires are recommended. From # 14 to # 8 AWG strand wires are available.
PCS RRH List11 Installation Guide Issue: 1.0.0 14/17 PMC CONFIDENTIAL 2.4 Power cable installing procedure 1. Preparation of Power cable 1.1. Remove the jacket of power cable by 30 mm. 1.2. Strip the jacket from an inner cable by 8 mm. Figure 2-5 Preparation of Power cable Do not damage the power cable when cutting around jacket. 2. Loose the screws of cabling cavities cover. 3. Open the cover 4. Mount entry connector (water-proof type) on the DC-48V-IN port. Figure 2-6 Preparation of the equipment Screws of cabling cavity Open the cover Mount entry connector on the DC-48V-IN port Warning
PCS RRH List11 Installation Guide Issue: 1.0.0 15/17 PMC CONFIDENTIAL 5. Put power cable inside from the hole of entry connector 6. Loose cable fixing screws of terminal block 7. Insert each cable to th e suitable hole of terminal, according to the instruction of the rear of the cover 8. Fix the terminal screws 10 in-lbs (1.13 Nm) Figure 2-7 Fixing Power cables 9. Fix the cable by entry connector 10. Close the cabling cavities cover 11. Fix the screws of cabling cavity’s cover xx Nm Figure 2-8 Fixing Power cable and cover Fix Power cable by entry connector Close the coverCable fixing screws Put Power cable inside The hole of entry connecter Cable fixing screwsTerminal block -48RTN.IDC SUPPLY-48RTN.IDC SUPPLY -48VRTN IN
PCS RRH List11 Installation Guide Issue: 1.0.0 16/17 PMC CONFIDENTIAL 2.5 Powering On the RRH 1. Turn off the breaker of the power supply and connect the power supply cable. 2. Connect the other cables before turn on the breaker. 3. After start up the BBU, please turn on the power supply to RRH. 4. Please confirm the RRH start state with Status LED. 2.6 S tatus LED LED Display States No. S tate LED Display 1 No Power Supplied Off 2 Initial Power Supply Solid Red 3 External Power Supply Failure Flash Red 4 Sof tware Download Flash Yellow 5 No nrecoverable Critical Failure Solid Red 6 Reco verable Critical Failure Flasu Red 7 Slave CPRI Ling Failure Solid Yellow 8 No n-Critical Nonrecoverable Failure Solid Red 9 No n-Critical Recoverable Failure Flash Red 10 External Antenna Failure Flash Red 11 Normal Operation Solid Green 12 S tandby Flash Green
PCS RRH List11 Installation Guide Issue: 1.0.0 17/17 PMC CONFIDENTIAL 3 FCC WARING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Properly shielded an d grounded cabl es and conn ectors must b e used for connection to host computers and / or peripherals in order to meet FCC emission limits. Data transmission is always initiated by software, which is th e passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. Inother words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. Frequecncy Tolerance: 11 ppb This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Navigation menu