Panasonic Mobile Communications Development of USA 23C002A GSM Cellular Mobile Radio with Bluetooth User Manual VS7 AAA

Panasonic Mobile Communications Development Corporation of USA GSM Cellular Mobile Radio with Bluetooth VS7 AAA

Users Guide Part 1

1Safety firstYour new phone is a convenient and effective communications tool, but it can be hazardous when used improperly. To avoid harming yourself or anyone else, please review the following information before using your phone.BatteriesBatteries can cause property damage, injury, or burns if the terminals are touched with a conductive material (for example, metal jewellery, keys, and so on). Therefore, use caution when handling a charged battery. Additional precautions and notes are listed below:• Never throw a battery into a fire; it may explode.• Fully recharge the battery if the battery is low or as soon as the low-battery alert beeps.• Do not drop the battery.• Do not allow bridging of battery contacts with metallic objects.• Do not remove the battery from the phone while the phone is powered on. Settings you have changed may revert to their previous settings.A recyclable lithium ion/polymer battery powers your phone. Please call1-800-8-BATTERY for information on how to recycle the battery.Charging devicesUse only Genuine Panasonic charging accessories. Use of attachments not recommended by Panasonic or your Service Provider may result in fire, electrical shock, or injury.Panasonic is not responsible for damage caused by using non-Panasonic accessories.• Do not expose charging adapters to moisture, water, or the weather.• Do not use an adapter with a damaged cord.• When using a DC adapter in an automobile, a small amount of electricity flows through the adapter, even if the phone is turned off. Remove the plug from the cigarette lighter whenever the phone will be left in the vehicle for long periods of time.• Always charge the battery in a well ventilated area, not in direct sunlight, between 41°F (5°C) and 95°F (35°C). It is not possible to recharge the battery if it is outside this temperature range.• Do not incinerate or dispose of the battery as ordinary trash. The battery must be disposed of in accordance with local legislation and may be recycled.Caution: The cigarette lighter must have a 12V negative ground socket. Do not use the adapter in a vehicle that has a positive ground system.General• Do not use the phone in extreme temperature or humidity. The specified operating temperature range is -22°F to +140°F (-30°C to +60°C).• Extreme temperatures may have a temporary effect on the operation of your phone. This is normal and does not indicate a fault.• Do not expose the phone (particularly the display) to direct sunlight for extended periods of time or to a humid, dusty or hot area.• Do not attempt to disassemble the phone. There are no user-serviceable parts inside.X800_Safety first_1213.fm  Page 1  Monday, December 13, 2004  4:34 PM
2• Do not subject the equipment to excessive vibration or shock.• Do not expose the phone to rain or spill liquids on it. If the equipment becomes wet immediately remove the battery and charging device and contact your dealer.• Do not use any accessories other than those designed for use with your phone.• Use of attachments not recommended or sold by Panasonic or your Service Provider may result in fire, electrical shock, or injury.• Panasonic is not responsible for damages caused by using non-Panasonic accessories.• Pressing any of the keys may produce a loud tone. Avoid holding the phone close to the ear while pressing the keys.• Keep metallic items that may accidentally touch the battery terminals away from the equipment. Battery damage may occur.• When disposing of any packing materials or old equipment check with your local authorities for information on recycling.• If connecting the phone to an external source, read the operating instructions of the equipment for the correct connection and safety precautions.• If connecting the phone to an external source, verify that the phone is compatible with the product to which you are connecting it.Availability of serviceThis phone, like any wireless phone, operates using radio signals, wireless and landline networks, and user-programmed functions. Because of this, connection in all conditions cannot be guaranteed. Therefore, you should never rely solely on any wireless phone for essential communications (for example, medical emergencies).Emergency (911) serviceIf you need to make an emergency (911) call, power the phone on, dial 911, and press D.Emergency calls can be made regardless of lock setting and with or without a SIM card.Remember, to make or receive any call, the phone must be switched on and in a service area that has adequate signal strength. Even if you are within the coverage area of your Service Provider, you may be in an area with insufficient signal strength to place a 911 call. Emergency calls might not be possible on all wireless phone networks or when certain network service and/or phone features are in use.X800_Safety first_1213.fm  Page 2  Monday, December 13, 2004  4:34 PM
3Safety tipsFollowing the suggestions in this section will help ensure safe and efficient operation of your Panasonic phone.This Model Phone Meets The Government’s Requirements For Exposure To Radio Waves.Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.412 W/kg and when worn on the body, as described in this user guide, is 0.200 W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID NWJ23C002A.Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com.Caution:  All Panasonic branded accessories are tested and comply with FCC RF exposure requirements. Non-Panasonic accessories may not comply.X800_Safety first_1213.fm  Page 3  Monday, December 13, 2004  4:34 PM
4Body-worn operationThis device was tested for body-worn operations with the back of the phone kept 1.5 cm. from the body. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that maintain a 1.5 cm. separation distance between the user’s body and the back of the phone. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.Antenna careThis mobile phone incorporates an internal antenna for radio communisation. Do not use the phone if it is damaged. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations.DrivingImportant: Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving:• Give full attention to driving - driving safely is your first responsibility;• Use handsfree operation, if available;• Pull off the road and park before making or answering a call if driving conditions so require.Electronic devicesMost modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.Pacemakers: The Health Industry Manufacturers Association recommends that a minimum separation of 6 inches (6”) or 15 centimeters (15 cm) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with independent research and recommendations of Wireless Technology Research.Persons with pacemakers:• Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON;• Should not carry the phone in a breast pocket;• Should use the ear opposite the pacemaker to minimize the potential for interference;• If you have any reason to suspect that interference is taking place, turn your phone OFF immediately.X800_Safety first_1213.fm  Page 4  Monday, December 13, 2004  4:34 PM
5Hearing Aids: Some digital wireless phones may interfere with some hearing aids. In the event of such interference, consult your Service Provider and hearing aid manufacturer.Other Medical Devices: If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.Vehicles: RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.Posted Facilities: Turn your phone OFF in any facility where posted notices so require.AircraftFCC regulations prohibit using your phone while in the air; switch off your phone before boarding an aircraft unless otherwise advised by airline personnel.Blasting areasTo avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in other areas posted:  “Turn off two-way radio.” Obey all signs and instructions.Potentially explosive atmospheresTurn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fueling areas such as gas stations; below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.For vehicles equipped with an air bagAn air bag inflates with great force. DO NOT place objects, including both installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.For U.S. Customers: Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard (NFPA-58).For a copy of this standard, contact:National Fire Protection AssociationOne Batterymarch ParkPO Box 9101Quincy, MA 02269Phone: 1-800-344-3555Web site: www.nfpa.org   E-mail address: Custserv@NFPA.orgX800_Safety first_1213.fm  Page 5  Monday, December 13, 2004  4:34 PM
28FCC/CE/IC STATEMENTSDECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITYWe, Panasonic Mobile Communications Co., Ltd., declare under our soleresponsibility that the product, EB-VS7to which this declaration relates, this device complies with Part 15 of the FCCRules. Operation is subject to theto the following two conditions: (1) this device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation.Caution: Exposure to Radio Frequency Radiation.This device and its antenna must not be co-located or operating in conjunction with any other antenna or  transmitter.Federal Communications Commission NoticeThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection. This equipment generates, usesand can radiated radio frequency energy and, If not installed and used in accordance with the instructions, may cause
29FCC/CE/IC STATEMENTSharmful interference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one or moreof the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.ModificationsThe FCC requires the user to be notified that any changes or modifications to this device that are not expresslyapproved by Panasonic may void the users authority to operate the equipment.Canada-Industry Canada (IC)The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada.  This Class B digital complies withCanadian ICES-003.Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.Europe-European Union NoticeRadio products with the CE 0560 or CE alert marking comply with the R&TTE Directive (1995/5/EC) issued by the Commission of the European Community.
6    Safety FirstTEN (10) DRIVER SAFETY TIPSYour wireless telephone gives you the powerful ability to communicate by voice-almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold.When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:1. Get to know your wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.2. When available, use a hands free device. If possible, add an additional layer of convenience and safety to your wireless phone with one of the many hands free accessories available today.3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.5. Do not take notes or look up phone numbers while driving. Jotting down a "to do" list or flipping through your address book takes attention away from your primary responsibility, driving safely.6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.7. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road.8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.10. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number."The wireless industry reminds you to use your phone safely when driving."For more information, please call 1-888-901-SAFE or visit www.wow-com.comInformation on this page provided by the Cellular Telecommunications Industry Association.
iVS7 Operating InstructionsContentsIntroduction .................... 1Safety considerations............. 1Care and maintenance........... 5About this manual .................. 7About Your Phone........ 10Phone overview.................... 10Key functions........................ 12Display ................................. 15DRM..................................... 17Indicator/Illumination Light ... 18Getting Started ............. 19Installing the SIM card and the battery ........................ 19Charging the battery............. 21Opening/closing the phone .. 23Switching the phone on/off... 23Menu Navigation........... 24Main menu structure ............ 24Displaying the menu............. 25Navigating the applications .. 26Basic Operations.......... 27Making calls ......................... 27Answering calls .................... 29Silent mode .......................... 31Voicemail.............................. 31In-call operations.................. 32Multiple calls operations....... 34Text entry ............................. 36Contacts.........................41Contacts menu structure.......41Viewing the Contacts list.......42Making a call from Contacts............................43Adding contacts ....................44Editing a Contacts card.........46Call log..................................47Speed dial.............................48Groups..................................49Advanced..............................49Service numbers...................52Messages .......................53Messages menu structure ....53Creating a new message ......54Receiving messages.............59Inbox.....................................60Archive..................................64Web mail...............................65Chat ......................................66Voicemail ..............................66Messages settings................67Memory status ......................69Camera ...........................70Camera menu structure........70Picture...................................71Video.....................................77VS7_AAA.book  Page i  Wednesday, August 3, 2005  5:10 PM
iiContentsBrowser ......................... 81Browser menu structure .......81Setting up your Browser .......81Viewing the contents ............82Browser options....................83Settings ......................... 89Settings menu structure........89Phone settings......................90Display settings ....................96Sounds & alerts ....................99Calls....................................101Connectivity........................105Security...............................117Tools ............................ 120Tools menu structure..........120SIM Tool Kit ........................121Alarms ................................121Sound recorder...................123Calculator ...........................124Calendar ...................... 125Browsing Calendar .............125Creating Calendar events...127Managing Calendar events..129My Media ..................... 131My Media menu structure ...131Pictures...............................132Sounds ...............................136Videos.................................139Games................................140Text templates....................141Memory status ....................142Games.......................... 143Games menu structure....... 143Games................................ 144Download games ............... 146Settings .............................. 147Information ......................... 147Appendix ..................... 148Accessories........................ 148CD-ROM ............................ 152Changing the X-Changeable CoverTM .......................... 153Troubleshooting ................. 154Glossary of terms ............... 157Specifications ..................... 158Licensing..................... 160Index ............................ 164VS7_AAA.book  Page ii  Wednesday, August 3, 2005  5:10 PM
1IntroductionThank you for purchasing this Panasonic digital cellular phone. This phone is designed to operate on GSM networks – GSM900, GSM1800 and GSM1900. It also supports GPRS for packet data connections. Please ensure the battery is fully charged before use.We, Panasonic Mobile Communications Development of Europe Ltd., declare that the EB-VS7 conforms with the essential and other relevant requirements of the directive 1999/5/EC. A declaration of conformity to this effect can be found at http://panasonic.co.jp/pmc/products/en/support/index.htmlSafety considerationsThe following information should be read and understood as it provides details, which will enable you to operate your phone in a manner which is both safe to you and your environment, and conforms to legal requirements regarding the use of cellular phones.PowerThis equipment should only be charged with approved charging equipment to ensure optimum performance and avoid damage to your phone. Other usage will invalidate any approval given to this apparatus and may be dangerous. Ensure the voltage rating of the Travel charger is compatible with the area of use when travelling abroad. A Travel charger (EB-CA001xx*) is supplied with the Main Kit.Note* xx identifies the charger region, e.g. CN, EU, UK, AU, US.BatteryUse of another battery pack than that recommended by the manufacturer may result in a safety hazard.If you use a feature which keeps the key backlight on continuously for a long time, such as a game or browser, battery life will become extremely short. To maintain longer battery life, set the Key backlight to off. (See “Key backlight” on page 93.)Do not use this phone without the battery cover attached.VS7_AAA.book  Page 1  Wednesday, August 3, 2005  5:10 PM
2IntroductionDisposing of the BatteryDo not incinerate or dispose of the battery as ordinary rubbish. The battery must be disposed of in accordance with local regulations and may be recycled.AircraftSwitch off your cellular phone when in an aircraft. Ensure that the settings of the alarm functions will not contravene regulations whereby it may automatically power on when in an aircraft or medical facility etc. The use of cellular phones in an aircraft may be dangerous to the operation of the aircraft, disrupt the cellular network and may be illegal. Failure to observe this instruction may lead to the suspension or denial of cellular phone services to the offender, or legal action or both.Do Not UseIt is advised not to use the equipment at a refuelling point. Users are reminded to observe restrictions on the use of radio equipment in fuel depots, chemical plants or where blasting operations are in progress. Never expose the battery to extreme temperatures (in excess of 60°C).DrivingIt is imperative that the driver exercises proper control of the vehicle at all times. Do not hold a phone while you are driving; find a safe place to stop first. Do not speak into a handsfree microphone if it will take your mind off the road. Always acquaint yourself thoroughly with restrictions concerning the use of cellular phones within the area where you are driving and observe them at all times.Electronic DevicesCare must be taken when using the phone in close proximity to personal medical devices, such as pacemakers and hearing aids.VS7_AAA.book  Page 2  Wednesday, August 3, 2005  5:10 PM
3IntroductionHeating EquipmentWhen your handset, the accompanying battery or charging accessories are wet, do not put those in any type of heating equipment, such as a microwave oven, a high pressure container, or a drier or similar. It may cause the battery, handset and/or charging equipment to leak, heat up, expand, explode and/or catch fire. Moreover, the product or accessories may emit smoke and their electrical circuits may become damaged and cause the products to malfunction. Panasonic is not responsible for any and all damages, whether direct or indirect, howsoever caused by any misuse.Backup Copies & SecurityIt is recommended that you create a copy or backup, as appropriate, of any important information and data which you store in your phone’s memory. In order to avoid accidental loss of data, please follow all instructions relating to the care and maintenance of your phone and its battery.Your phone has the capability of storing and communicating personal information. It is recommended that you take care to ensure that any personal or financial information is stored separately from your phone. You should use security features, such as the SIM lock to protect information held in your phone. Panasonic accepts no liability for any and all losses howsoever arising from any loss of data, including but not limited to direct and indirect losses (to include, but not limited to consequential loss, anticipated savings, loss of revenue).DownloadingYour phone has the capability of downloading and storing information and data from external sources. It is your responsibility to ensure that in doing this you are not infringing any copyright laws or other applicable legislation. Panasonic accepts no liability for any and all losses howsoever arising from any loss of data or any such infringement of copyright or intellectual property rights, including but not limited to direct and VS7_AAA.book  Page 3  Wednesday, August 3, 2005  5:10 PM
4Introductionindirect losses (to include, but not limited to consequential loss, anticipated savings, loss or revenues).Efficient UseFor most efficient use, hold the phone as you would any normal phone. To avoid deterioration of signal quality or antenna performance, do not touch or “cup” the antenna area while the phone is switched on. Unauthorised modifications or attachments may damage the phone and violate applicable regulations. The use of an unapproved modification or attachment may result in the invalidation of your guarantee – this does not affect your statutory rights.CameraYou are advised to take appropriate care over the use of the internal camera. It is your responsibility to ensure that you have permission to take photographs of people and objects and that you do not infringe any personal or third party rights when using the camera. You must comply with any applicable international or national law or other special restrictions governing camera use in specific applications and environments. This includes not using the camera in places where the use of photographic and video equipment may be prohibited. Panasonic accepts no liability for any and all losses howsoever arising from any infringement of copyright or intellectual property rights, including but not limited to direct and indirect losses. Do not leave the camera facing direct sunlight, as this may impair its performance.Other important informationThe colour liquid crystal display (LCD) uses high-precision production technology, and in certain circumstances pixels may appear brighter or darker. This is due to characteristics of the LCD and is not a manufacturing defect.This phone is designed, manufactured and tested to ensure that it complies with the specifications covering RF exposure guidelines VS7_AAA.book  Page 4  Wednesday, August 3, 2005  5:10 PM
5Introductionapplicable at the time of manufacture, in accordance with EU, USA FCC and Australian ACA regulations.This phone should only be used with Panasonic approved accessories to ensure optimum performance and avoid damage to your phone. Panasonic is not responsible for damage caused by using non-Panasonic approved accessories.This phone must be used in compliance with any applicable international or national law or any special restrictions governing its use in specified applications and environments. This includes but is not limited to use in hospitals, aircraft, whilst driving and any other restricted uses.Some of the contents described in this manual are subject to change without notice.Care and maintenancePressing any of the keys may produce a loud tone. Avoid holding the phone close to the ear while pressing the keys.Extreme temperatures may have a temporary effect on the operation of your phone. This is normal and does not indicate a fault. The display quality may deteriorate if the phone is used in environments over 40°C for a long time.Do not modify or disassemble the equipment. There are no user serviceable parts inside.Do not subject the equipment to excessive vibration or shocks. Do not drop the battery.VS7_AAA.book  Page 5  Wednesday, August 3, 2005  5:10 PM
6IntroductionAvoid contact with liquids or moisture. If the equipment becomes wet, immediately remove the battery and charger. Keep the phone dry.Do not leave the equipment in direct sunlight or a humid, dusty or hot area. Never throw a battery into a fire. It may explode.Keep metallic items that may accidentally touch the terminals away from the equipment/battery.Batteries can cause property damage, injury, or burns if terminals are touched with a conductive material (i.e. metal jewellery, keys, etc.).Always charge the battery in a well ventilated area, not in direct sunlight, between +5°C and +35°C. It is not possible to recharge the battery if it is outside this temperature range.When connecting the phone to an external source, read the operating instructions of the equipment for the correct connection and safety precautions. Ensure the phone is compatible with the product it is being connected to.When disposing of any packing materials or old equipment, check with your local authorities for information on recycling.VS7_AAA.book  Page 6  Wednesday, August 3, 2005  5:10 PM
7IntroductionAbout this manualSymbols used in this manualThe following symbols are used in this manual to represent the limited availability of the function or service. = Depending on your SIM card. = Depending on network availability. = Depending on your network operator. The service may only be available on a subscription basis.GraphicsThe graphic elements in this manual are for illustrative purposes and may differ from the actual phone and/or graphic elements displayed on the phone. Panasonic reserves the right to change the information in this manual without prior notice.KeysKeys in this manual may differ from the actual keys on your phone. Refer to page 12 for the icons that represent the keys in this manual.VS7_AAA.book  Page 7  Wednesday, August 3, 2005  5:10 PM
8IntroductionHow to read this manual<Example> Fixed dial in Settings menu on page 118.This function is SIM card dependent. For other symbols, refer to page 7.d Menu navigationBefore following the steps, you need to enter Main menu, then move through the sub menus, described next to the d icon. “>” means “scroll through the menu and select”.    VS7_AAA.book  Page 8  Wednesday, August 3, 2005  5:10 PM
9IntroductionIn the example:From Main menu, press Navigation key (up/down/left/right) to scroll to Settings and press Navigation key (centre). Press Navigation key (up/down) to scroll to Security and press Navigation key (centre) or Left Soft key (Select)*1. Press Navigation key (up/down) to scroll to Fixed dial and press Navigation key (centre) or Left Soft key (Select)*1. You can also select Fixed dial by pressing [D].Now you can continue onto the step 1:1. Press Navigation key (up/down) to scroll to Enable or Disable, then press Navigation key (centre) or Left Soft key (Select)*12. Enter the PIN2 code (4-8 digits), then press Navigation key (centre) or Left Soft key (Ok)*1*1The word is shown in the lower left hand corner of the display, indicating a command that the key gives to the phone when you press it.Note: There are several ways to select items from menu lists. See “Menu selection method” on page 26.VS7_AAA.book  Page 9  Wednesday, August 3, 2005  5:10 PM
10About Your PhonePhone overviewRight Soft keyNavigation keyMain DisplayEarpieceSilent Mode keyPower/End keyMicrophoneLeft Soft keyCall keyAsterisk keyOne PushAuto OpenbuttonCharging IndicatorMacro Mode SwitchVS7_AAA.book  Page 10  Wednesday, August 3, 2005  5:10 PM
11About Your PhoneCamera LensSide-up keyInfrared PortSide-down keySpeakerIndicator/Illumination LightMulti Function keyFront displayPersonal HandsfreeConnector/Charging Connector/Data TransmissionConnectorVS7_AAA.book  Page 11  Wednesday, August 3, 2005  5:10 PM
12About Your PhoneKey functionsKey name Function Key icon*1Navigation keyPress outside edges to scroll up [1], down [2], left [3] or right [4] to move through menus and text. Press centre [0] to select option, perform Alert mute, or take a picture or record a video clip in Camera mode.[1] [2][3] [4][0]Left Soft keyPerform the functions indicated by the text shown in the lower left-hand corner of the display. [5]Right Soft keyPerform the functions indicated by the text shown in the lower right-hand corner of the display.[6]Call key Make or answer a call. [q]Power/End keyPress and hold to switch the phone on/off. End or reject a call. Return to standby mode.[Y]Numeric keysEnter numbers and characters. Press and hold [S]-[K] for Speed dialling. Press and hold [L] to enter the international prefix (+).[L] to [K]Asterisk keyEnter “e”. In text entry mode, press to change the letter case, or press and hold to change the input method.[e]Silent Mode keyEnter “r”. Press and hold to switch the Silent mode on/off. While entering a phone number, press and hold to enter a pause (p).[r]Side-up key*2Scroll page up. Increase volume or zoom level. Perform Alert mute. [O]Side-down key*2Scroll page down. Decrease volume or zoom level. Perform Alert mute. [P]VS7_AAA.book  Page 12  Wednesday, August 3, 2005  5:10 PM
13About Your Phone*1The key icons given in the table represent the actual keys on the phone.*2Located on the right side of the phone.Quick keysYou can easily access features instead of navigating through the menus.Multi Function key*2Take a picture or record a video clip in Camera mode. Perform Alert mute. [U]Key FunctionIn standby modeShort press[0] Open Main menu/Keyguard off[5] Open Messages menu[6] Open Browser[1]9[2]9[3]9[4] Open the shortcut menu[q] Open Call log[O]9[P] Increase/decrease the volumeLong press[0] Keyguard on[A] Dial your voice mailbox[S]-[K] Speed dial[r] Silent mode on/off[U] Switch to Picture modeKey name Function Key icon*1VS7_AAA.book  Page 13  Wednesday, August 3, 2005  5:10 PM
14About Your PhoneDuring a callShort press[1]9[4]9[O] Increase the volume[2]9[3]9[P] Decrease the volume[U] Start/stop sound recording[q]Switch between hold and unhold on one call or switch between one active and one held callIn Menu listShort press[A]-[K] Select Menu A-K[e] Select Menu e[L] Select Menu L[r] Select Menu rKey FunctionVS7_AAA.book  Page 14  Wednesday, August 3, 2005  5:10 PM
15About Your PhoneDisplayMain display (in standby mode)Front display (in standby mode)Note: The current operator name is shown on standby display. You can change the position of the operator name. See “Operator name” on page 96.WallpaperBattery charge level iconLeft Soft keyselection areaRight Soft key selection areaDateTimeSignal strength iconExternalWallpaperBattery charge level iconSignal strengthiconVS7_AAA.book  Page 15  Wednesday, August 3, 2005  5:10 PM
16About Your PhoneStatus iconsThe status icons are displayed or animated according to the currently activated functions.Icon MeaningSignal strength; the more bars visible, the stronger the signalIn roaming areaBattery charge levelBattery is chargingGPRS is availableSilent profile is activeMeeting profile is activeOutdoor profile is activeCar profile is activeSMS message storage area is fullMMS message storage area is fullJavaTM application is suspendedUnread SMS messageUnread MMS messageUnread WAP Push messageCall diverts is onInfrared is activeBluetooth is activeVS7_AAA.book  Page 16  Wednesday, August 3, 2005  5:10 PM
17About Your PhoneDRMYour phone has DRM (Digital Right Management) that is used to control actions such as sending downloaded ringtones, graphics and sound clips to other people. Files downloaded and indicated by the icon ( ) can be used with restriction enforced by suppliers. The restriction includes use of such files for a limited period of time only or specified number of times.To check the status of your rights, e.g. expiration date or number of times it can be used, see Details setting on page 133, 137 and 144. For further information, contact your service provider.Bluetooth headset or handsfree is connectedUSB connection is availableNew voicemail receivedAll tones are offVibration alert is onAlarm is setNon-secure CSD connectionSecure CSD connectionNon-secure GPRS connectionSecure GPRS connectionKeyguard is onIcon MeaningVS7_AAA.book  Page 17  Wednesday, August 3, 2005  5:10 PM
18About Your PhoneIndicator/Illumination LightThe Indicator/Illumination Light flashes or beams when the events in the table below occur.To specify the illumination colours for the events, see “Illuminations” on page 92.Events DescriptionWhen you are receiving a call/missed callsFlash or beam in the selected colour.To set a different illumination colour for respective contacts, see “Storing a contact in your phone” on page 44.When you receive an SMS/MMS messageWhen you receive a WAP Push message Flash or beam in the selected colour.When you are having a conversationWhen the flip is closedWhen the battery is charging Flash in the specified colour.When data is being transferredSchedule notification Beam in the specified colour. See “Creating Calendar events” on page 127 or “Setting the alarm” on page 121.AlarmNote: If the Indicator/Illumination Light is set to on for battery charging and the phone is switched on, the Indicator/Illumination Light illuminates during charging. If the phone is switched off, the Indicator/Illumination Light will not illuminate.VS7_AAA.book  Page 18  Wednesday, August 3, 2005  5:10 PM
19Getting StartedInstalling the SIM card and the batteryThe SIM (Subscriber Identity Module) card and the battery must be installed before using your phone.Before handling the SIM card and the battery, ensure that the phone is switched off and the charger is disconnected from the phone.Inserting/removing the SIM cardSee “Inserting/removing the battery” on page 20 to remove the battery cover and the battery.Inserting the SIM cardPosition the SIM card as shown, with gold contacts facing down and the notched corner turned to the right. Carefully slide the SIM card into the SIM card pocket until the card is all the way seated.Removing the SIM cardPlace a finger on the bottom edge of the SIM card and gently slide it out.VS7_AAA.book  Page 19  Wednesday, August 3, 2005  5:10 PM
20Getting StartedInserting/removing the batteryInserting the battery1. Insert the small tabs at the top of the battery into the notch at the top of the battery compartment. Ensure the 3 gold contacts align with the 3 gold pins in the phone.2. Replace the cover on the phone. Make sure the cover clicks into place.Removing the battery1. Place your finger on the small bar at the top of the cover. Slide the cover slightly toward the bottom of the phone, then lift the cover off the phone.2. Place your finger on the tab at the base of the battery. Lift the battery off the compartment.VS7_AAA.book  Page 20  Wednesday, August 3, 2005  5:10 PM
21Getting StartedCharging the batteryYour phone can be charged either when it is switched on or off. You can use your phone even while it is charging.Ensure that the battery is inserted into the phone before charging.1. Open and hold the connector cover.Connect the charger to Charging Connector, then connect the charger to the mains power supply.2. When charging is complete, disconnect the charger from the outlet before removing the plug from the phone. Then hold the connector cover and press and hold the release buttons on both sides of the connector’s end and pull gently to disconnect the charger from the phone.After you have removed the Charging Connector, replace the connector cover over the socket.Note: DO NOT force the connector as this may damage the phone and/or the charger.If the battery has been deeply discharged, it may take several minutes before the Battery charge level indicator is displayed.VS7_AAA.book  Page 21  Wednesday, August 3, 2005  5:10 PM
22Getting StartedBattery charge level indicatorCharging Indicator goes out when charging is completed.Low battery warningWhen the battery power is low, a “Battery low” message is displayed and a warning tone sounds. The phone automatically switches off after the tone. Fully recharge the battery. If you receive the low battery warning during a conversation, charge your phone to continue with the conversation.While charging Charging completeVS7_AAA.book  Page 22  Wednesday, August 3, 2005  5:10 PM
23Getting StartedOpening/closing the phoneYou can open your phone by pressing One Push Auto Open button.Flip settingWhen Active flip setting is set to On (see page 103), you can answer a call by opening the phone and end a call by closing the phone.When One push SMS setting is set to On (see page 67), new SMS messages can be displayed by opening the flip.Switching the phone on/off1. Press and hold [Y] for several seconds to switch the phone onA greeting may be displayed and the phone enters standby mode.2. Press and hold [Y] for several seconds to switch the phone offNote: If your SIM card is PIN protected, your PIN code will be requested. Enter the PIN code and [0]9[5] (Ok). See “Security” on page 117.DO NOT switch off the phone while resetting/downloading/deleting a file or running/terminating a JavaTM application.One PushAuto OpenbuttonVS7_AAA.book  Page 23  Wednesday, August 3, 2005  5:10 PM
24Menu NavigationMain menu structureMy MediaPictures ................. 132Sounds .................. 136Videos.................... 139Games................... 140Text templates ....... 141Memory status....... 142MessagesCreate new .............. 54Inbox........................ 60Archive .................... 64Web mail*1............... 65Chat*1...................... 66Voicemail ................. 66Messages settings... 67Memory status ......... 69ContactsContacts list............. 42Add contact.............. 44Call log .................... 47Speed Dial list.......... 48View groups............. 49Advanced ................ 49Service numbers*1*252Calendar ...........125BrowserPANASONIC BOX ... 81SettingsPhone settings ......... 90Display settings........ 96Sounds & alerts........ 99Calls....................... 101Connectivity ........... 105Security.................. 117GamesGames ...................144Download*1............146Settings ..................147Information .............147CameraPicture......................71Video........................77ToolsSIM tool kit*2..........121Alarms....................121Sound recorder ......123Calculator............... 124*1*2VS7_AAA.book  Page 24  Wednesday, August 3, 2005  5:10 PM
25Menu NavigationDisplaying the menuThe menu system allows you to access functions which do not have their own dedicated buttons on the keypad.In standby mode:1. [0]Main menu appears with 9 menu options. (See “Main menu structure” on page 24.)2. [1929394] to scroll to the required menu 7 [0]9[5] (Select)To go back to Main menu:1. [6] (Back) repeatedly until Main menu screen appearsShortcut: To jump to and open one of the 9 application items, simply press the Numeric key corresponding to the required item’s location. The numbering system is: 123456789VS7_AAA.book  Page 25  Wednesday, August 3, 2005  5:10 PM
26Menu NavigationNavigating the applicationsCurrent settingsWhen you highlight an item in the menu list, the current setting of the item is displayed in the bar just above the menu list.<Example>In the case shown to the right, the current setting of Warning tone is “Off”.Menu selection methodThere are several ways to select items: by using center Navigation key or Left Soft key, or by entering the required number, e or r given to the item.<Example>To select Warning tone in the display shown above:•[192] to scroll to Warning tone 7 [0]•[192] to scroll to Warning tone 7 [5] (Select)• Press the menu number [G]Keys corresponding to the menu numbers•[A]-[K]: Menu A-K•[e]: Menu e•[L]: Menu L•[r]: Menu rNote: Direct access keys to the menus with no menu numbers/symbols are not available.VS7_AAA.book  Page 26  Wednesday, August 3, 2005  5:10 PM
27Basic OperationsMaking callsTo make a call, your phone must be within the range of a network with adequate signal strength.Standard diallingIn standby mode:1. Enter the area code and phone number 7 [q]9[0]2. When the other party answers, talk into Microphone3. [Y]9[6] (End) to hang upThe duration of the call is displayed.Auto redialYour phone will automatically redial the number up to 10 times under certain conditions, such as no answer, destination number is busy, network busy, or some connection errors.When your call is rejected:1. “Auto redial?” 7 [5] (Yes) to start Auto redial2. To stop Auto redial while redialling, [Y]9[6] (Cancel)Note: There are several ways to select items from menu lists. See “Menu selection method” on page 26.Note: To erase a digit: [6] (Clear)To increase the earpiece volume: [1]9[4]9[O]To decrease the earpiece volume: [2]9[3]9[P]If Active flip is set to On (see page 103), you can answer a call by opening the phone and end a call by closing the phone.VS7_AAA.book  Page 27  Wednesday, August 3, 2005  5:10 PM
28Basic OperationsContacts diallingYou can make calls using the numbers in Contacts.d Main menu > Contacts > Contacts list1. [192] to scroll to the required contactOREnter letters to find a contact beginning with the specific letters2. [q]3. If the card has several phone numbers stored, [192] to scroll to the required number 7 [0]9[5] (Call)Recent call diallingYou can make calls using the numbers in Call log.In standby mode:1. [q]2. [394] to switch to Dialled numbers, Answered calls or Missed calls screen3. [192] to scroll to the required number 7 [q]International diallingThe international prefix (+) and the destination country/region code should be entered, followed by the area code and phone number.1. Press and hold [L] until “+” is displayed2. Enter the country/region code3. Enter the area code and phone number 7 [q]Note: Many countries/regions include an initial “0” in the area code. This should, in most cases, be omitted when dialling international numbers. For further help, contact your service provider.VS7_AAA.book  Page 28  Wednesday, August 3, 2005  5:10 PM
29Basic OperationsEmergency callTo make an emergency call, your phone must be within the range of a network.When SIM card is inserted:1. Enter the local emergency number 7 [q]9[0]When SIM card is not inserted: 1. [5] (Options) 7 Select SOSAnswering callsWhen there is an incoming call, the phone rings and/or vibrates (depending on your phone setting). (See “Sounds & alerts” on page 99.)When the phone is ringing and/or vibrating:1. [q]9[5] (Accept)Rejecting callsWhen the phone is ringing and/or vibrating:1. [Y]9[6] (Cancel)Note: Most countries support the international emergency number 112. If you find the number does not work on your phone, contact your service provider.Note: If Any key answer is set to On (see page 102), you can answer a call by pressing any key except [Y], [0], [6] (Cancel), [U], [O] and [P].If Active flip is set to On (see page 103), you can answer a call by opening the phone and end a call by closing the phone.VS7_AAA.book  Page 29  Wednesday, August 3, 2005  5:10 PM
30Basic OperationsMissed call notificationIf you cannot answer a call, Missed call notification appears on the standby screen.To view the Missed call list:1. [0]9[5] (View)2. To call back, [192] to scroll to the required log 7 [q]Alert muteYou can turn the ringing tone and/or vibration off before answering a call.When the phone is ringing and/or vibrating:1. When the phone is closed: [U]9[O]9[P]When the phone is open: [0]2. [q] to answer the callAnswering a second callWhen on an active call, you may receive another call.To enable this service, Call waiting must be active. (See “Call waiting” on page 102.)If you hear an alert tone during a call:1. [q]9[5] (Accept)The first call is placed on hold.2. [q] to switch between the two calls if requiredTo reject another call:1. [6] (End)To end the active call and answer the incoming call:1. [Y] to end the active call2. [q] to answer the callVS7_AAA.book  Page 30  Wednesday, August 3, 2005  5:10 PM
31Basic OperationsAuto answerWhen you use the optional Personal Handsfree earpiece, you can answer a call automatically. To enable this service, Auto answer must be on. (See “Auto answer” on page 103.)Silent modeTo use your phone in a quiet situation, you can activate the Silent mode. You can personalise the Silent mode setting. (See “Profiles” on page 90.)In standby mode:1. Press and hold [r] to activate/deactivate the Silent modeVoicemailVoicemail is a network service which allows callers, who could not reach you, to leave voice messages. You may need to subscribe to this service through your service provider. For further details, see “Voicemail” on page 66.Retrieving stored voice messagesWhen a new voice message is stored, an alert sounds and ( ) appears on the display and you receive an SMS notification.1. Press and hold [A] to call your voice mailboxIf the number is not valid, contact your service provider.2. Follow the recorded instructions3. [Y] when finishedVS7_AAA.book  Page 31  Wednesday, August 3, 2005  5:10 PM
32Basic OperationsIn-call operationsIn-call options (while connected to an active call)When on a call, the following options are available.1. [5] (Options) 7 Select the required optionHoldYou can put a call on hold.During a call:1. [q] to switch between Hold call and ResumeOR[5] (Options) 7 Select Hold call or ResumeHold call/Resume Put or resume a call on hold.From contacts Access the Contacts list.Create SMS Create a new SMS message.Inbox (SMS) Access Inbox (SMS).Calendar Access Calendar.Speaker mode/Handheld mode/Bluetooth modeSwitch to Speaker, Handheld or Bluetooth talking mode.Record Record the conversation. The sound clip is saved to My Media.VS7_AAA.book  Page 32  Wednesday, August 3, 2005  5:10 PM
33Basic OperationsHandsfree talkingYou can have a conversation without holding the phone to your ear.Swapping between Speaker and Handheld mode1. [5] (Options) 7 Select Speaker mode or Handheld modeVolume controlYou can adjust the volume of the phone earpiece, speaker, headset or Bluetooth audio device if attached.To increase the volume:1. [1]9[4]9[O]To decrease the volume:1. [2]9[3]9[P]DTMFDTMF (Dual Tone Multi Frequency) can be sent during a conversation. These are often used to access voicemail, paging and computerised home banking. For example, you may need to enter a number to remotely access voicemail messages. A phone number may be stored in the Contacts card together with a DTMF sequence, allowing the number to be dialled upon recall and the DTMF sequence to be sent automatically.To send DTMF during a call:1. Enter digits [L]-[K], [e] or [r]Pause dialUsing pauses allows you to send DTMF automatically.1. Enter the phone number2. Press and hold [r] until a “p” is displayed3. Enter the DTMF digits after the pause, e.g. enter the number to access voicemail messages4. [q]9[0]When the call is connected, the DTMF sequence is sent after 3 seconds.VS7_AAA.book  Page 33  Wednesday, August 3, 2005  5:10 PM
34Basic OperationsMaking a second callYou can make another call while on a call.During a call:1. Enter the second phone number or select a phone number from the Contacts listTo access Contacts list, see “In-call operations” on page 32.2. [q]The first call is put on hold.3. [q] to switch between the two calls if requiredMultiple calls operationsIn-call options (while on multiple calls)When on more than one call, the following options are available.1. [5] (Options) 7 Select the required optionSwap Switch between one active and one held call.MergeEnable multi-party conversation when two calls are connected (one active, one on hold). See “Conference” on page 35.From contacts Access the Contacts list.Create SMS Create a new SMS message.Inbox (SMS) Access Inbox (SMS).Calendar Access Calendar.Speaker mode/Handheld mode/Bluetooth modeSwitch to Speaker, Handheld or Bluetooth talking mode.Record Record the conversation. The sound clip is saved to My Media.VS7_AAA.book  Page 34  Wednesday, August 3, 2005  5:10 PM
35Basic OperationsConferenceYou can have a conversation with up to 5 different parties at the same time.During a call (one active call and one call on hold):1. [5] (Options) 7 Select MergeThe 2 calls are joined into a Conference call.To add new participants:2. Call the next person or answer an incoming call3. [5] (Options) 7 Select MergeTo end the Conference call:4. [Y]To split the caller from the Conference call and talk privately:During a Conference call:1. [5] (Options) 7 Select Conference call2. [192] to scroll to the required caller you wish to talk to3. [5] (Options) 7 Select SplitThe remaining callers can continue with the Conference call.4. To end the private call and rejoin the Conference call, [5] (Options) 7 Select MergeVS7_AAA.book  Page 35  Wednesday, August 3, 2005  5:10 PM
36Basic OperationsText entryInput methodYour phone provides three text input methods to enter characters.An icon on the upper left of the screen shows the current input method and letter case.T9®A predictive text entry system. You can enter a word with fewer key presses.Multi-tap A traditional way to type in a letter. Press a key several times until the required letter appears.Numeric You can enter numbers (0-9), e, r and +.Input method Icon Letter caseT9®T9yAutomaticT9uUpper caseT9 Lower caseMulti-tapAbc AutomaticABC Upper caseabc Lower caseNumeric 123 -VS7_AAA.book  Page 36  Wednesday, August 3, 2005  5:10 PM
37Basic OperationsChanging the input methodPress and hold [e] to cycle through the input methods as follows.T9 (T9y) 7 Multi-tap (Abc) 7 Numeric (123)Changing the letter casePress [e] repeatedly until the icon for the required letter case mode appears.Auto capital changeWhen the letter case is set to Automatic (T9y and Abc), the first character is entered as upper case and subsequent letters as lower case.When one of the following characters [. (Period) ! ? ] is entered, the next character is entered as upper case.VS7_AAA.book  Page 37  Wednesday, August 3, 2005  5:10 PM
38Basic OperationsT9® text input methodThe T9® text input method enables you to enter text faster and easier. You only need to press a key once for any letter you require on that key. The program searches its built-in dictionary to predict the word that most closely matches your key presses.1. In text entry screen, press a key once for any letter you require on that key2. Continue pressing other keys until the end of a word is reached3. Select the required wordORIf the required word is not in the dictionary, “?” is displayed after the word.[5] (Spell) 7 Enter the correct word 7 [0]9[5] (Add)The word is added to the internal dictionary automatically.For example, to enter “Hello!”, press keys as follows.My dictionaryWords that you enter in My dictionary are added to the internal dictionary so that they are suggested next time.To add words to My dictionary:1. In text entry screen, [5] (Options) 7 Select My dictionary2. Enter a word 7 [0]9[5] (Add)Key [F][D][G][G][H][A][2] x 4Display I He Gel Hell Hello Hello. Hello!VS7_AAA.book  Page 38  Wednesday, August 3, 2005  5:10 PM
39Basic OperationsEditing textInserting/deleting textMove the cursor by pressing [1929394] to the position you want to insert or delete a letter. Press [6] (Clear) to delete a character. Press and hold [6] (Clear) to delete all the characters.Copying/cutting/pasting text1. [5] (Options) 7 Select Copy or Cut2. [1929394] to move to the text you wish to copy or cut3. [0]9[5] (Start) 7 [1929394] to highlight the text 7 [0]9[5] (Stop)4. [1929394] to move to a new required location5. [5] (Options) 7 Select PasteOptionsWhen entering text, the following options may be available by pressing [5] (Options).*1Depends on each application.*2Not available in Chinese T9 mode.Use contacts*1Access Contacts menu to use Contacts data.Copy/Cut/Paste See “Copying/cutting/pasting text” on page 39.Add symbol Show the Symbol list from which you can select any symbol available on your phone.Input method Select the input method.T9 on/off*1Turn On or Off the predictive dictionary.Input language*1Select a language you wish to write in.My dictionary*2Add words to the internal dictionary.Exit Exit the text edit mode.VS7_AAA.book  Page 39  Wednesday, August 3, 2005  5:10 PM
40Basic OperationsThe following table shows characters available on your phone.The characters vary depending on the Input language setting (see page 39).KeyInput method (Input language: English)T9® (T9y, T9u or T9) Multi-tap (Abc, ABC or abc) Numeric (123)[L] Space0(Press and hold) +[A] . , - ? ! ’ @ : ; / 1. , ? 1 ! " - : ; @ / e ( ) # + _ = [ ] { } ' ¡ ¿ & % \ ^ ~ | < > f ¢ £ $ ¥ ¤ § ` (Space) * (Linefeed)1[S] A B C 2 (a b c 2) A B C 2 Γ Á Ä Å Â Ã Æ Ç(a b c 2 α β γ á ä å æ à â ã) 2[D] D E F 3 (d e f 3) D E F 3 ∆ É Ê(d e f 3 δ ε ζ é è ê) 3[F] G H I 4 (g h i 4) G H I 4 Θ Í (g h i 4 η θ ι ì í) 4[G] J K L 5 (j k l 5) J K L 5 Λ (j k l 5 κ λ µ)5[H] M N O 6 (m n o 6) M N O 6 Ξ Ñ Ó g Ö Ø Ô Õ(m n o 6 ν ξ ó h ñ ö ø ò ô õ) 6[I] P Q R S 7 (p q r s 7) P Q R S 7 Π Σ(p q r s 7 π ρ l σ ß) 7[J] T U V 8 (t u v 8) T U V 8 Φ Ú j Ü(t u v 8 τ υ φ ú k ü ù) 8[K] W X Y Z 9 (w x y z 9) W X Y Z 9 Ψ Ω (w x y z 9 χ ψ ω)9[e]Letter case change e(Press and hold) Input method change[r]. , ? ! " - : ; @ / e ( ) # + _ = [ ] { } ' ¡ ¿ & % \ ^ ~ | < > f ¢ £ $ ¥ ¤ § ` (Space) * (Linefeed) r(Press and hold) LinefeedShortcut: To enter numbers while in T9 or Multi-tap method, press and hold the required numeric key [L]-[K].VS7_AAA.book  Page 40  Wednesday, August 3, 2005  5:10 PM
41ContactsContacts menu structureNote: There are several ways to select items from menu lists. See “Menu selection method” on page 26.Contacts list ..................... 42Add contact ...................... 44Phone..................................... 44SIM......................................... 46Call log.............................. 47Dialled numbers ..................... 47Answered calls ....................... 47Missed calls............................ 47Speed Dial list .................. 48View groups ..................... 49Advanced ..........................49Synchronisation ...................... 49My number.............................. 50Display by ...............................51Memory status ........................ 51Copy all from SIM ................... 51Copy all to SIM ....................... 51Delete all.................................52Service numbers*1...........52*1VS7_AAA.book  Page 41  Wednesday, August 3, 2005  5:10 PM
42ContactsViewing the Contacts listYou can search for a phone number in the Contacts list. All the numbers stored in the phone and SIM card are displayed.Searching for a contactd Main menu > Contacts > Contacts list1. [192] to scroll to the required contactOREnter letters to find a contact beginning with the specific letters2. To view the Contacts card, [0]OptionsIn the Contacts list, the following options are available by pressing [5] (Options).View View the selected Contacts card.Call Call the selected contact.Create messageCreate an SMS or MMS, and send it to the selected contact. See “Creating a new message” on page 54.Edit Edit the selected contact. See “Editing a Contacts card” on page 46.Search Search a contact by entering characters.Add contact Add a new contact. See “Adding contacts” on page 44.Delete Delete the selected contact.VS7_AAA.book  Page 42  Wednesday, August 3, 2005  5:10 PM
    43ContactsMaking a call from Contactsd Main menu > Contacts > Contacts list1. [192] to scroll to the required contactOREnter letters to find a contact beginning with the specific letters2. [q]3. If the card has several phone numbers stored, [192] to scroll to the required number 7 [0]9[5] (Call)Speed dial Assign the selected contact to a Speed dial. See “Assigning speed dial keys” on page 48.Copy to phone/SIM Copy the selected contact to the phone or the SIM card.Send viaSend the selected contact to another device via infrared or Bluetooth. See “Infrared” on page 105 or “Bluetooth® wireless technology” on page 107.VS7_AAA.book  Page 43  Wednesday, August 3, 2005  5:10 PM
44ContactsAdding contactsStoring a contact in your phoneIn the phone, you can store detailed information for each contact.The entries are retained even if you damage your SIM card.d Main menu > Contacts > Add contact > Phone1. [192] to scroll to the required field 7 [0]2. Enter information 7 [0]To enter characters, see “Text entry” on page 36.3. When entries are completed, [5] (Save)First name*1Enter the first name.Last name*1Enter the last name.Mobile number*1Enter the phone numbers.Home number*1Work number*1Mobile email*1Enter the e-mail addresses.Personal email*1Work email*1Birthday Enter the contact’s birthday.Postal address Enter Additional info, No./street, Postal code, City, State and Country.Note Enter notes.VS7_AAA.book  Page 44  Wednesday, August 3, 2005  5:10 PM
    45Contacts*1The contact entry can be saved when at least one of the items is filled.*2RingtoneSelect the required ringtone from <Default> or My Media. To download a ringtone, select Download*2.Message alertSelect the required Message alert from <Default> or My Media. To download a Message alert, select Download*2.Illuminations Select <Default> or the required illumination colour.Picture Select the required picture.Group Select the required group.Note: If a picture in My Media is attached to a Contacts card, it appears on the screen when the contact calls you. When the picture is set to be attached to a Contacts card, the phone saves the picture resized for the Contacts card if the picture is larger than the display size.For downloading contents, visit http://box.panasonic.com/VS7_AAA.book  Page 45  Wednesday, August 3, 2005  5:10 PM
46ContactsStoring a contact in your SIM cardYou can store some information for each contact in your SIM card.d Main menu > Contacts > Add contact > SIM1. [192] to scroll to the required field 7 [0]2. Enter information 7 [0]3. [5] (Save)Storing a contact from Call logSee “Saving a phone number from Call log” on page 47.Editing a Contacts cardd Main menu > Contacts > Contacts list1. Highlight the required Contacts card (See “Searching for a contact” on page 42.)2. [5] (Options) 7 Select Edit3. Edit the required entry 7 [5] (Save)Name Enter the name.Tel number Enter the phone number.Note: The length of name and number, and the total amount of data are SIM dependent.VS7_AAA.book  Page 46  Wednesday, August 3, 2005  5:10 PM
    47ContactsCall logRecently dialled phone numbers, answered calls and missed calls are stored in Call log. The numbers in the Call log list can be used to call, send a message or add to Contacts.Viewing/Dialling from Call logd Main menu > Contacts > Call log1. [394] to move to Dialled numbers, Answered calls or Missed calls2. [192] to scroll to the required log 7 [0]3. [0] to callSaving a phone number from Call logd Main menu > Contacts > Call log1. [394] to move to Dialled numbers, Answered calls or Missed calls2. [192] to scroll to the required phone number3. [5] (Options) 7 Select Add to contacts4. Select New or Add5. If New is selected: Enter other informationIf Add is selected: Highlight the required contact 7 [5] (Select) 7 If there is no empty field, “Would you like to replace?” 7 [0]9[5] (Yes) 7 Select the number you want to replace in Phone Contacts6. [5] (Save)Shortcut: You can directly view the Dialled numbers list by pressing [q] in standby mode.VS7_AAA.book  Page 47  Wednesday, August 3, 2005  5:10 PM
48ContactsOptionsIn each Call log list, the following options are available by pressing [5] (Options).Speed dialYou can quickly dial phone numbers by pressing keys 2-9.Assigning speed dial keysd Main menu > Contacts > Speed Dial list1. [192] to scroll to the required key 7 [0]2. Enter phone number 7 [0]To assign a speed dial key to a contact:d Main menu > Contacts > Speed Dial list1. [192] to scroll to the required key 7 [5] (LookUp)2. Highlight the required contact 7 [5] (Select)3. If the card has several phone numbers stored, [192] to scroll to the required number 7 [0]9[5] (Select)Using the speed dial keysIn standby mode:1. Press and hold a speed dial key ([S]-[K]) 7 [5] (Call)Call Call the selected number.Create message Create an SMS or MMS message to the selected number.Add to contactsStore the selected number to Contacts. See “Saving a phone number from Call log” on page 47.Delete Delete the selected number.Delete all Delete all the logs in the list.VS7_AAA.book  Page 48  Wednesday, August 3, 2005  5:10 PM
    49ContactsGroupsYou can categorise the Contacts list stored in your phone into 20 groups.Viewing group membersd Main menu > Contacts > View groups1. Select the required groupThe contacts in the selected group are displayed.Renaming a groupd Main menu > Contacts > View groups1. [192] to scroll to the required group 7 [5] (Rename)2. Enter a new group name 7 [0]AdvancedSynchronisationYou can synchronise your Contacts list with your network server. You can just send changes or send all your records to the network server. For further details, see “Synchronisation” on page 112.To send only changes to the network server:d Main menu > Contacts > Advanced > Synchronisation > Modified contactsThe phone confirms completion.To send all your records to the network server:d Main menu > Contacts > Advanced > Synchronisation > All contactsThe phone confirms completion.VS7_AAA.book  Page 49  Wednesday, August 3, 2005  5:10 PM
50ContactsMy numberYou can store your own numbers in the phone and SIM card.Storing numbers in Mobile profiled Main menu > Contacts > Advanced > My number > Mobile profile1. [0]9[5] (Create)2. Repeat steps 1-3 in “Storing a contact in your phone” on page 44Storing numbers in SIM profiled Main menu > Contacts > Advanced > My number > SIM profile1. When the profile is empty: [0]9[5] (Create)When the profile has the stored number(s): [5] (Options) 7 Select Create2. Repeat steps 1-3 in “Storing a contact in your SIM card” on page 46OptionsWhen viewing My number, the following options are available by pressing [5] (Options).*1Available only for SIM profile.Edit Edit the profile.Create*1Create a new profile.Delete Delete the profile.Send viaSend the profile via infrared or Bluetooth. See “Infrared” on page 105 or “Bluetooth® wireless technology” on page 107.VS7_AAA.book  Page 50  Wednesday, August 3, 2005  5:10 PM

Navigation menu