PHILIPS Consumer Electronics CD150 MASTER US-EN TELEPHONE ANSWERING MACHINE User Manual cd155 ifu master en us

PHILIPS Consumer Electronics MASTER US-EN TELEPHONE ANSWERING MACHINE cd155 ifu master en us

USERS MANUAL

Master US_EN Telephone answering machine WarningUse only rechargeable batteries.Charge the handset for 24 hours before use.!CD 155Register your product and get support at www.philips.com/welcomecd155_ifu_master_en_us.book Page 1 Wednesday, October 24, 2007 6:46 PM
cd155_ifu_master_en_us.book Page 2 Wednesday, October 24, 2007 6:46 PM
Table of contents 11 Safety information 31.1 Equipment Approval Information 31.2 Interference Information 41.3 Hearing Aid Compatibility (HAC) 51.4 FCC RF Radiation Exposure Statement 52Important 62.1 Power requirements 62.2 Conformity 72.3 Electric, Magnetic and Electromagnetic Fields ("EMF") 72.4 Recycle your batteries 72.5 Service Centers 83 Your phone 93.1 What’s in the box 93.2 Overview of your phone 103.3 Display icons 123.4 Overview of the base station 134Getting started 144.1 Connect the base station 144.2 Wall mounting the base 144.3 Install your phone 154.4 Menu structure 165 Using your phone 185.1 Make a call 185.2 Answer a call 195.3 End a call 196 Use more of your phone 206.1 Switch the handset on/off 206.2 Keypad lock/unlock 206.3 Text or number entry 206.4 Call in progress 206.5 Using your phonebook 216.6 Using the redial list 236.7 Using the call log 236.8 Using the intercom 256.9 Paging 266.10 Chain dialling 267 Personal settings 277.1 Change the handset name 277.2 Handset Tones 277.3 Change the display language 28Table of contentsCD155_IFU_TDM.fm Page 1 Wednesday, October 24, 2007 6:55 PM
2Table of contents7.4 Activate/deactivate auto hang-up 288 Clock and Alarm 298.1 Set date and time 298.2 Set date/time format 298.3 Set alarm 298.4 Set alarm tone 309 Advanced settings 319.1 Change Master PIN 319.2 Registration 319.3 Unregister 329.4 Reset unit 329.5 Set area code 329.6 Set prefix 339.7 Change recall time 339.8 Change the dial mode 349.9 Set first ring 349.10 Default settings 3410 Telephone answering machine (TAM) 3510.1 Play 3510.2 Delete all messages 3610.3 Switch the answering machine on/off via handset 3610.4 Record your personalised outgoing message (OGM) 3610.5 Set the answer mode 3710.6 Answering machine settings 3711 Technical data 4012 Frequently asked questions 4113 Index 43Table of contentsCD155_IFU_TDM.fm Page 2 Wednesday, October 24, 2007 6:55 PM
Safety information 31 Safety information1.1 Equipment Approval InformationYour telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA.1.1.1 Notification to the Local Telephone CompanyOn the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company.The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company.A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.Notes • This equipment may not be used on coin service provided by the telephone company.• Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company.• Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.• If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this product does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.US Number is located on the cabinet bottom.REN Number is located on the cabinet bottom.1.1.2 Rights of the Telephone Company Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances cd155_ifu_master_en_us.book Page 3 Wednesday, October 24, 2007 6:46 PM
4 Safety informationwarrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service.1.2 Interference InformationThis equipment generates and uses radio frequency energy which may interfere with residential radio and television reception if not properly installed and used in accordance with instructions contained in this manual. Reasonable protection against such interference is ensured, although there is no guarantee this will not occur in a given installation. If interference is suspected and verified by switching this equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient the radio/television receiver’s antenna, relocate the equipment with respect to the receiver, plug the equipment and receiver into separate circuit outlets. The user may also wish to consult a qualified radio/television technician for additional suggestions. This equipment has been fully tested and complies with all limits for Class B computing devices pursuant to part 15 FCC Rules and Regulations. This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. cd155_ifu_master_en_us.book Page 4 Wednesday, October 24, 2007 6:46 PM
Safety information 5However, there is no guarantee that interference will not occur in a particular installation.Privacy of Communications may not be ensured when using this product.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference).• Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.• Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected.If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies.Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.1.3 Hearing Aid Compatibility (HAC)This telephone system meets FCC/Industry Canada standards for Hearing Aid Compatibility.1.4 FCC RF Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the belt clip supplied with this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.cd155_ifu_master_en_us.book Page 5 Wednesday, October 24, 2007 6:46 PM
6Important2ImportantTake time to read this user manual before you use your phone. It contains important information and notes regarding your phone.NOTICE: This product meets the applicable Industry Canada technical specifications.The equipment must be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe systems, if present, are connected together. This precaution may be particularly important in rural areas.CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.NOTES: This equipment may not be used on coin service provided by the telephone company.2.1 Power requirements• This product requires an electrical supply of 220-240 volts AC. In case of power failure, the communication can be lost.• The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible.• The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard UL 60950.WarningTo avoid damage or malfunction:• Do not allow the charging contacts or the battery to come into contact with metal objects.• Do not open it as you could be exposed to high voltages.• Do not allow the charger to come into contact with liquids.• Never use any other battery than the one delivered with the product or recommended by Philips: risk of explosion.• Always use the cables provided with the product.• Handsfree activation could suddenly increase the volume in the earpiece to a very high level: make sure the handset is not too close to your ear.• This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls.!cd155_ifu_master_en_us.book Page 6 Wednesday, October 24, 2007 6:46 PM
Important 7• Do not expose the phone to excessive heat caused by heating equipment or direct sunlight.• Do not drop your phone or allow objects to fall on your phone.• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these may harm the set.• Do not use the product in places where there are explosive hazards.• Do not let small metal objects come into contact with the product. This can deteriorate audio quality and damage the product.• Active mobile phones in the vicinity may cause interference.About operating and storage temperatures:• Operate in a place where temperature is always between 0 and 35º C (32 to 95º F).• Store in a place where temperature is always between -20 and 45º C (-4 to 113º F).• Battery life may be shortened in low temperature conditions.2.2 ConformityWe, Philips declare that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This product can only be connected to the analogue telephone networks of the countries mentioned on the packaging.You can find the Declaration of Conformity on www.p4c.philips.com.2.3 Electric, Magnetic and Electromagnetic Fields ("EMF")1. Philips Royal Electronics manufactures and sells many consumer oriented products which usually, as with any electronic apparatus, have the ability to emit and receive electro magnetic signals.2. One of Philips' leading Business Principles is to take all necessary health and safety precautions for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products.3. Philips is committed to develop, produce and market products that cause no adverse health effects.4. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today.5. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.2.4 Recycle your batteriesDo not dispose your rechargeable batteries. Call the toll fee number 1-800-822-8837 to get instructions on how to recycle your batteries.cd155_ifu_master_en_us.book Page 7 Wednesday, October 24, 2007 6:46 PM
8ImportantThe RBRC® Seal on the nickel metal hydride battery indicates that Philips Royal Electronics is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada.The RBRC® program provides a convenient alternative to placing used nickel metal hydride batteries into the trash or municipal waste, which may be illegal in your area.Philips’s participation in RBRC® makes it easy for you to drop off the spent battery at local retailers participating in the RBRC® program or at authorized Philips product service centers.Please call 1-800-8-BATTERY for information on Ni-MH battery recycling and disposal bans/restrictions in your area. Philips’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources.RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation.2.5 Service CentersCall Center (USA and Canada): 800-233-8413E-mail support: accessorysupport@philips.comcd155_ifu_master_en_us.book Page 8 Wednesday, October 24, 2007 6:46 PM
Your phone 93 Your phoneCongratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.3.1 What’s in the boxNote*You may find in the box the line adaptor delivered separately from the line cable. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.In multihandset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries. Handset Base station with bracketBattery door2 AAA rechargeable NiMH batteriesPower supply Line cord*User manual Warranty card Quick start guideBelt clipcd155_ifu_master_en_us.book Page 9 Wednesday, October 24, 2007 6:46 PM
10 Your phone3.2 Overview of your phoneAEarpieceB OK key During a call: Access the Call menu In other modes: Select the function displayed on the handset screen directly above it.C Back/Clear key In text or number editing mode: Short press to delete one digit/character. Long press to delete all digits/characters.In other modes: Select the function displayed on the handset screen directly above it.D Navigation keys In idle mode: Scroll up to access the Call log and scroll down to access the Phonebook.During a call: Scroll up/down to increase or decrease earpiece and loudspeaker volume.In editing mode: Scroll up/down to go to previous or next character.In other modes: Scroll up/down a menu list or go to the previous or next record.ETalk key In idle mode: Answer an incoming external or internal call.During a call: Activate the recall function.In phonebook/call log/redial list reviewing mode: Dial the selected number.F Hang-up/Exit key In idle mode: Long press to switch on/off the handset.During a call: Hang up a call.In other modes: Short or long press to return to idle mode. G Menu key In idle mode: Access the main menu.H Loudspeaker key In idle mode: Turn on the loudspeaker and dial the number. Answer an incoming call using handsfree mode. During a call: Toggle the loudspeakeron/off.In phonebook/call log/dial list reviewing mode: Dial the selected number using handsfree mode.I Redial key In idle mode: Access the Redial list.In direct dialing mode: Dial the last dialed number.J Keypad lock/format keyIn idle mode: Insert *. Long press to lock/unlock keypad.<c:remvl*cd155_ifu_master_en_us.book Page 10 Wednesday, October 24, 2007 6:46 PM
Your phone 11During a call: Switch from pulse dialing to tone dialing.In call log reviewing mode: Press repeatedly to view the alternate dialing sequences.K Ringer off key In idle mode: Insert #. Long press to turn the ringer on/off.During a call: Insert #. Long press to insert a pause. In text editing mode: Switchbetween upper and lower case. Long press to insert a pause. L Mute keyDuring a call: Mute/unmute the handset microphone.M Call transfer/Intercom keyIn idle mode: Initiate an internal call.During a call: Hold the line and page another handset or toggle between an external and internal call. Long press to initiate a conference call.N Microphone O Battery doorP LoudspeakerWarningHandsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear.QBelt clip#Mi!cd155_ifu_master_en_us.book Page 11 Wednesday, October 24, 2007 6:46 PM
12 Your phone3.3 Display iconsAStatus barIndicates battery is fully charged.Indicates battery is fully discharged.Indicates that an external call is connected or held. Icon blinks when receiving an incoming call.Indicates new voice messages received. Icon blinks when there are unread messages. Displays when the call log is accessed. Icon blinks when there are new missed calls.Displays when the phonebook is accessed.Displays when the alarm clock is activated.Displays when the loudspeaker is activated.Displays when ringer off is activated.Displays when the answering machine is activated. Icon blinks when new answering machine messages are received. Icon blinks rapidly when the answering machine memory is full.Indicates that the handset is registered and within range of the base station. Icon blinks when the handset is out of range or is searching for a base.BOK keyDisplays when in menu mode to confirm your selection.C keyIndicates that more options are available. Use the navigation keys to scroll up/down. Increase or Decrease earpiece or loudspeaker volume during a call. D BACK keyDisplays when in menu mode. Select BACK to return to the previous menu level. Select BACK to delete the last digit/character entered.cd155_ifu_master_en_us.book Page 12 Wednesday, October 24, 2007 6:46 PM
Your phone 133.4 Overview of the base stationA LED indicator Slow Blinking (1 second interval): Indicates that there are unread new messages.Fast Blinking (0.5 seconds interval): Indicates that the answering machine memory is full.Steady On: Indicates that the answering machine is on.Indicates an on-going TAM operation.Indicates an on-going remote operation via handset.BVolume keys Increase (+) or Decrease (-) speaker volume.The call screening is activated if the speaker volume is not set to L0.Speaker volume levels:L0 (Off) to L5 for speaker volume when TAM is in idle or call screening mode.L1 to L5 for speaker volume during message playback.COn/Off key Short press to switch on/off the answering machine.D Delete key Delete current message during message playback.Long press to delete all messages when TAM is in idle mode (unread messages will not be deleted).E Previous key Go to previous message if pressed within 1 second of current message playback.Replay current message if pressed after 1 second of current message playback.F Next key Skip to next message during message playback.G Play/Stop key Play phone messages (the first recorded will be played first). Press again to stop message playback.H Paging key Page handset.Long press to start registration procedure.- +ofRspVcd155_ifu_master_en_us.book Page 13 Wednesday, October 24, 2007 6:46 PM
14 Getting started4 Getting started4.1 Connect the base stationPlace the base station in a central location near the telephone line socket and electricity socket.Connect the line cord and the power cable to their corresponding connectors at the back of the base station.Connect the other end of the line cord and power cable to their respective sockets.NoteThe line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.WarningAvoid placing the base station too close to large metal objects such as filing cabinets, radiators or electrical appliances. This can impair the range and sound quality. Buildings with thick internal and external walls may impair transmission of signals to and from the base.WarningThe base station does not have an ON/OFF power switch. Power is applied when the power adaptor is plugged into the unit and connected to the electricity socket. The only way to power down the unit is to unplug the power adaptor from the electricity socket. Therefore, ensure that the electricity socket is easily accessible.The power adaptor and telephone line cord have to be connected correctly, as incorrect connection could damage the unit.Always use the telephone line cord supplied with the unit. Otherwise, you may not get a dial tone.4.2 Wall mounting the baseThe base is designed to support wall mounting. To wall mount the base, follow the instructions below.WarningOther wall mounting methods are not recommended and may damage the product.Remove the bracket from the back of the base station by pressing down the two latches on the top of the bracket.Turn the bracket upside down and then re-insert the bracket to the back of the base station.123!!!12cd155_ifu_master_en_us.book Page 14 Wednesday, October 24, 2007 6:46 PM
Getting started 15Align the mounting holes on the back of the base with a standard wall phone mounting jack.Slide the base down into place.4.3 Install your phoneBefore using the handset, the batteries have to be installed and fully charged.4.3.1 Install batteryWarningAlways use AAA rechargeable batteries supplied with your unit. There could be risk of battery leakage if you use alkaline batteries or other battery types.Slide out the battery cover.Place the batteries in the correct polarity as indicated and replace the cover.4.3.2 Charge batteryWarningThe handset must be charged for at least 24 hours before using it for the first time.When the battery level becomes low, the low battery sensor alerts you by sounding an audible tone and blinking the battery icon. If the battery level becomes exceedingly low, the phone automatically switches off shortly after the alert and any function in progress will not be saved. Place the handset on the charging cradle of the base station. A beep is emitted if the handset is placed correctly.The battery icon on the display blinks during charge.The battery icon becomes steady when the handset is fully charged.NoteOptimal battery life is reached after 3 cycles of complete charging (over 15 hours) and discharging, allowing approximately 12 hours of talk-time and 150 hours of stand-by time. The indoor and outdoor range of the phone is up to 50 metres and 300 metres respectively. When the handset moves beyond the operation range, the antenna icon will blink.TipWhen reaching the range limit and the conversation becomes crackly, move closer to the base.34!12!123cd155_ifu_master_en_us.book Page 15 Wednesday, October 24, 2007 6:46 PM
16 Getting started4.4 Menu structureThe table below describes the menu tree of your phone.Press m key to display the main menu. Use navigation keys : to navigate within the menus and press < key to enter each option.PHONEBOOK NEW ENTRYLIST ENTRY Phonebook entriesEDIT ENTRYDELETE ENTRYDELETE ALLDIRECT MEMORY KEY 1/2PERSONAL SET HANDSET NAMEHANDSET TONES RING VOLUME RINGER OFF/LOW/MEDIUM/HIGH/BOOSTRING MELODY Melody listKEY BEEP ON/OFFLANGUAGE ENGLISH/SPANISH/FRENCHAUTO HANG-UP ON/OFFCLOCK & ALARM SET DATE & TIMEFORMAT TIME FORMAT 12 HRS/24 HRSDATE FORMAT DD/MMMM/DDALARM OFF/ON ONCE/ON DAILYALARM TONE MELODY 1/2/3cd155_ifu_master_en_us.book Page 16 Wednesday, October 24, 2007 6:46 PM
Getting started 17ADVANCE SET CHANGE PINREGISTERUNREGISTERRESETAREA CODEAUTO PREFIX DETECT DIGIT PREFIX NUMRECALL TIME SHORT/MEDIUM/LONGDIAL MODE TONE/PULSEFIRST RING ON/OFFANS. MACHINE PLAY During playback REPEAT/PREVIOUS/NEXT/DELETEDELETE ALLANSWER ON/OFF ON/OFFRECORD OGMANSWER & RECORDPLAY OGM/RECORD PERSONALIZED OGM/DELETEANSWER ONLY PLAY OGM/RECORD PERSONALIZED OGM/DELETEANSWER MODEANSWER & RECORDANSWER ONLYSETTINGS RING DELAY 2/3/4/5/6/7/ECONOMYREMOTE ACCESS ACTIVATE/DEACTIVATEVOICE LANGUAGEENGLISH/SPANISH/FRENCHcd155_ifu_master_en_us.book Page 17 Wednesday, October 24, 2007 6:46 PM
18 Using your phone5 Using your phone5.1 Make a call5.1.1 PrediallingDial the number (maximum 24 digits).Press r key.• The call is initiated.TipYou may insert a prefix number to the beginning of your predial number, see “Set Prefix” on page 31 for more information.5.1.2 Direct diallingPress r or v key to take the line.Dial the number.• The call is initiated.5.1.3 Call from redial listPress l key in idle mode.Scroll : to an entry in the redial list.Press r key.• The call is initiated.5.1.4 Call from the call logPress u in idle mode. Scroll : to CALL LIST or ANS. MACHINE and press <OK to enter the respective sub-menus.5.1.5 To choose the format for call log displayYou must choose the correct format to dial the area code and number of the call log record chosen. The original incoming number from the call log will appear as a 7, 10 or 11-digit number. If it is a long distance call, the prefix digit 1 will automatically appear in front of the 10-digit local calls.When viewing the call log, press * to change the format of the call log display as it should be dialled from your location. For example, if the call log entry appears as “234-567-8900”:• Press * once to display “1-234-567-8900”• Press * twice to display “567-8900”• Press * 3 times to display “1-567-8900”• Press * 4 times to display “1-234-567-8900” again.To dial the current displayed number, press r key.• The call is initiated.NoteYou need to subscribe to Caller Line Identification service to be able to see the caller’s number or name in the call log (see “Access call list” on page 24).When saving the call list entry to phonebook, the original incoming number will be saved instead of the current displayed number. If the first 3 digits of the incoming number corresponds to the local area code set in your phone, they will be filtered automatically when you press the r or v key to dial. To change the local area code, please refer to “Set area code” on page 32.1212123112cd155_ifu_master_en_us.book Page 18 Wednesday, October 24, 2007 6:46 PM
Using your phone 195.1.6 Call from the phonebookPress d in idle mode.Scroll : to a phonebook entry.Press r key.• The call is initiated.TipInstead of scrolling : to browse the phonebook entries, you can press the numeric key corresponding to the first letter of the entry you wish to locate. For example, pressing 2 will show the entries starting with A. Pressing 2 again will show the entries starting with B, etc...5.2 Answer a callDangerWhen the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing.When the phone rings, press r key.• The call is established.NoteIncoming call has priority over other events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc will be aborted.5.2.1 Handsfree answeringDangerHandsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear.When the phone rings, press v key.• The handset loudspeaker is activated.5.3 End a callTo end a conversation, press e key.• The call ends.TipYou can simply place the handset back to its base station to end the call (see Activate/Deactivate Auto Hang-up on page 28). This feature is activated by default.NoteThe call duration (HH-MM-SS) will be displayed on the handset screen. Press cBACK.to return to idle mode.123cd155_ifu_master_en_us.book Page 19 Wednesday, October 24, 2007 6:46 PM
20 Use more of your phone6 Use more of your phone6.1 Switch the handset on/offPress and hold e key for more than 5 seconds to switch on/off the handset in idle mode.6.2 Keypad lock/unlockPress and hold * key for 1 second to lock/unlock the keypad in idle mode.6.3 Text or number entryWhen you select a field in which you can enter text, you can enter the letters that are printed on the keys by pressing the relevant key once or several times. For example, to enter the name “PETER”:Press 7 once: PPress 3 twice: PEPress 8 once: PETPress 3 twice: PETEPress 7 three times: PETERThe table below gives you the character assignment during text or number entry:TipPress cBACK to delete the last digit or character entered.6.4 Call in progressSome options are available to you during a call. The available options are:6.4.1 Adjust earpiece volumeDuring a call, press : to select from VOLUME 1 to VOLUME 3.6.4.2 Mute/unmute microphoneWhen the microphone is muted, your correspondent cannot hear you.During a call, press M key to turn off the microphone.Press M key again to turn on the microphone.6.4.3 Activate/deactivate loudspeaker modeDangerHandsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear.During a call, press v key to activate the loudspeaker mode.Press v key again to return to normal mode.Keys Assigned characters1space 1 _ < > *2A B C 23D E F 34G H I 45J K L 56M N O 67P Q R S 7123458T U V 8 ?9W X Y Z 900 -- / \ # +##**1212cd155_ifu_master_en_us.book Page 20 Wednesday, October 24, 2007 6:46 PM
Use more of your phone 216.4.4 Adjust loudspeaker volumeDuring a call, press : to select from VOLUME 1 to VOLUME 5.6.4.5 Call waitingIf you have subscribed to Call Waiting service, the earpiece will emit a beep tone to inform you that there is a second incoming call. The number or name of the second caller will also be displayed on your phone if you have subscribed to Caller Line Identification service (CLI). Please contact your network provider for more information on this service.When you receive a second incoming call while on the phone, you can carry out the following operations:The above operations may be different according to your network.6.5 Using your phonebookYour phone can store up to 50 phonebook memories. Each phonebook entry can have a maximum of 24 digits for the phone number and 14 characters for name.6.5.1 Store a contact in the phonebookPress m key in idle mode, scroll : to PHONEBOOK and press <OK. Press <OK again to enter NEW ENTRY.ENTER NAME is displayed on the screen.Enter the name of the contact (maximum 14 characters) and press <OK.ENTER NUMBER is displayed on the screen.Enter the number (maximum 24 digits) and press <OK to confirm.• A validation tone is emitted.NotePress cBACK to delete the last digit or character entered.To return to idle mode, press e key.TipYou cannot store a new phonebook entry when the memory is full. In this case, you have to delete existing entries to make space for new entries.6.5.2 Access phonebookPress d in idle mode to browse the phonebook entries. Alternatively, you can press m key, scroll : to PHONEBOOK and press <OK, scroll : to LIST ENTRY and press <OK. • The phonebook entries will be listed in alphabetical order.To view the details, press <OK.TipInstead of scrolling : to browse the phonebook entries, you can press the numeric key corresponding to the first letter of the entry you wish to locate. For example, pressing 2 will show the entries starting with A. Pressing 2 again will show the entries starting with B, etc...6.5.3 Modify a phonebook entryPress m key in idle mode, scroll : to PHONEBOOK and press <OK, scroll : to EDIT ENTRY and press <OK.Scroll : to select an entry to edit.r+2Put the current call on hold and answer the second call.r+1End the current call and answer the second call. 123451212cd155_ifu_master_en_us.book Page 21 Wednesday, October 24, 2007 6:46 PM
22 Use more of your phonePress <OK to display name. Edit the name and press <OK.Edit the number and press <OK to confirm.• A validation tone is emitted.6.5.4 Delete a phonebook entryPress m in idle mode, scroll : to PHONEBOOK and press <OK, scroll : to DELETE ENTRY and press <OK.Scroll : to select an entry to delete and press <OK.CONFIRM? is displayed on the screen. Press <OK again to confirm deletion.• A validation tone is emitted.NotePress cBACK to discard change and the screen returns to phonebook list.6.5.5 Delete the phonebook listPress m key in idle mode, scroll : to PHONEBOOK and press <OK. Scroll : to DELETE ALL and press <OK. CONFIRM? is displayed on the screen. Press <OK again to confirm deletion.• A validation tone is emitted.NotePress cBACK to discard change and the screen returns to phonebook list.6.5.6 Direct access memoryThere are 2 direct access memories (Keys 1 and 2) included in the phonebook memory. A long press on the keys in idle mode will automatically dial the stored phone number. 6.5.6.1 Add/edit direct access memoryPress m key in idle mode, scroll : to PHONEBOOK and press <OK, scroll : to DIRECT MEMORY and press <OK.Scroll : to KEY 1 or KEY 2 and press <OK.• The stored number is displayed (if any).Press m to enter direct memory menu. Scroll : to select ADD and press <OK.• Phonebook list is displayed.Scroll : to select the phonebook record to store in the direct memory location.• A validation tone is emitted and the screen returns to previous menu.6.5.6.2 Delete direct access memoryPress m key in idle mode, scroll : to PHONEBOOK and press <OK, scroll : to DIRECT MEMORY and press <OK.Scroll : to KEY 1 or KEY 2 and press <OK.• The stored number is displayed (if any).Press m to enter direct memory menu. Scroll : to DELETE and press <OK.CONFIRM? is displayed on the screen. Press <OK to confirm deletion.• A validation tone is emitted and the screen returns to previous menu.341231231234512345cd155_ifu_master_en_us.book Page 22 Wednesday, October 24, 2007 6:46 PM
Use more of your phone 236.6 Using the redial listThe redial list stores the last 5 numbers dialed. A maximum of 24 digits can be displayed for each entry.6.6.1 Access redial listPress l key to go to the redial list and scroll : to browse the redial list.• The last number dialed will appear first in the redial list. If the redial number matches a phonebook entry, the name will be displayed instead. To view the details, press <OK key.NoteTo return to idle mode, press e key.6.6.2 Save a redial number into the phonebookPress l key in idle mode to go to the redial list, scroll : to select an entry and press <OK. Press <OK again to enter COPY TO PHBK.ENTER NAME is displayed on the screen.Enter the name of the contact (maximum 14 characters) and press <OK. ENTER NUMBER is displayed on the screen.Enter the number (maximum 24 digits) and press <OK to confirm.• A validation tone is emitted. STORED is displayed for 2 seconds and the screen returns to redial list.NotePress cBACK to delete the last digit or character entered.6.6.3 Delete a redial numberPress l key in idle m ode to go to the redial list, scroll : to select an entry and press <OK.Scroll : to DELETE and press <OK to confirm deletion.• A validation tone is emitted and the screen returns to redial list.NotePress cBACK to discard change and the screen returns to redial list.6.6.4 Delete the redial listPress l key in idle m ode to go to the redial list and press <OK, scroll to DELETE ALL and press <OK.CONFIRM? is displayed on the screen.Press <OK to confirm deletion.• A validation tone is emitted and the screen returns to redial list.NotePress cBACK to discard change and the screen returns to redial list.6.7 Using the call logThe call log stores the last 10 external calls and any new voice mail and answering machine messages received. If you have subscribed to Caller Line Identification (CLI), and provided the identity of the caller is not withheld, the name (or number) of the caller will be displayed. NoteIf the identity of the caller is withheld or the network does not provide the date and time information, then the information will not be displayed in the call log. If you have not subscribed to Caller Line 12123451213cd155_ifu_master_en_us.book Page 23 Wednesday, October 24, 2007 6:46 PM
24 Use more of your phoneIdentification service, there will not be any information displayed in the call log.6.7.1 Access call listPress u in idle mode. Scroll : to CALL LIST and press <OK.• The calls (missed and received) are displayed in chronological order with the most recent call at the top of the list. To view the details, press <OK.6.7.2 Consulting the call listThe screen can either display :• the caller’s number*• the caller’s name (if recorded in the phonebook)*•<UNKNOWN> if it is an unidentified call•<WITHHELD> if it is a private call.•<UNAVAILABLE> if it is a public or out of area call.* Subject to a subscription with your network operator.NoteYou can display the phone number, the time and the date of the call by pressing <OK. The time and date displayed is dependent on the network.6.7.3 Save call list entry into the phonebookPress u in idle mode, scroll : to select CALL LIST and press <OK, scroll : to a call list entry and press <OK.Scroll : to COPY TO PHBK and press <OK.ENTER NAME is displayed on the screen.Enter the name of the contact (maximum 14 characters) and press <OK.ENTER NUMBER is displayed on the screen.Enter the number (maximum 24 digits) and press <OK to confirm.•STORED is displayed for 2 seconds and the screen returns to call log.NotePress cBACK to delete the last digit or character entered.6.7.4 Delete a call list entryPress u in idle mode, scroll : to select CALL LIST and press <OK, scroll : to a call list entry and press <OK. Scroll : to DELETE and press <OK to confirm deletion.• A validation tone is emitted and the screen returns to call log.NotePress cBACK to discard change and the screen returns to call log.6.7.5 Delete the call listPress u in idle mode, scroll : to select CALL LIST and press <OK, scroll : to a call list entry and press <OK. Scroll : to DELETE ALL and press <OK. CONFIRM? is displayed on the screen.Press <OK again to confirm deletion.• A validation tone is emitted and the screen returns to call log.12312345612123cd155_ifu_master_en_us.book Page 24 Wednesday, October 24, 2007 6:46 PM
Use more of your phone 25NotePress cBACK to discard change and the screen returns to call log.6.8 Using the intercomWarningIntercom and call transfer is only possible with handsets registered to the same base station.This feature is only available when there are at least 2 registered handsets. It allows you to make free internal calls, transfer external calls from one handset to another and use the conference option.6.8.1 Intercom another handsetNoteIf the handset does not belong to CD150/155 range, this function may not be available.Press i key in idle mode. • Intercom is established immediately if there are only 2 registered handsets.If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll : to select the specific handset number you wish to call and press <OK to start intercom. 6.8.2 Transfer an external call to another handsetDuring the call, press and hold i key to put the external call on hold (the caller can no longer hear you). • Intercom is established immediately if there are only 2 registered handsets.If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll : to select the specific handset number you wish to call and press <OK. • The called handset rings.Press r key on the called handset to answer the internal call, where both internal callers can talk.• Intercom is established.Press e key on the first handset to transfer the external call to the called handset.• The external call is transferred.NoteIf there is no answer from the called handset, press i key to resume the external call. 6.8.3 Answer an external call during intercomDuring intercom, a new call tone is emitted when there is an incoming external call. Press r to answer the external call and end the intercom. • Connection with the external call is established.NoteTo put the internal call on hold and answer the incoming external call, press i key. 6.8.4 Switch between an internal and external callDuring the call, press i key to switch between an internal or external call.6.8.5 Establish a three-party conference callThe conference call feature allows one external call to be shared with two !12123412cd155_ifu_master_en_us.book Page 25 Wednesday, October 24, 2007 6:46 PM
26 Use more of your phonehandsets (in intercom). The three parties can share the conversation and no network subscription is required. During the call, long press i key to put the external call on hold (the caller can no longer hear you). If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll : to select the specific handset number you wish to call and press <OK.Press r or v key on the called handset to answer the internal call, where both internal callers can talk.• Intercom is established.Press and hold i key for 2 seconds on the first handset to start the three-party conference.•CONFERENCE will be displayed on the screen once the conference call is established.TipTo establish intercom using handsfree mode, press v key again on the called handset to turn on speakerphone.6.9 PagingThe paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries. Press V key on the base station.• All the registered handsets start to ring. Once retrieved, press any key on the handset to end the paging.NoteIf there are no key presses within 30 seconds, the handset and base station will automatically return to idle mode. TipPress V key on the base station again to stop paging.6.10 Chain diallingThis feature allows you to dial an extension to a number already saved in the phonebook during a call.Press r to take the line and press m to open phonebook list.• The phonebook entries are listed in alphabetical order.Scroll : to select an entry and press <OK.• The first part is dialed.Enter the extension.• Each digit blinks to indicate dial out.123412123cd155_ifu_master_en_us.book Page 26 Wednesday, October 24, 2007 6:46 PM
Personal settings 277 Personal settings7.1 Change the handset nameYou can name the handset and display the handset name in idle mode. The default handset name of your handset is PHILIPS.Press m key in idle mode, scroll : to PERSONAL SET and press <OK, scroll : to HANDSET NAME and press <OK.The last stored name is displayed.Press cBACK key to delete the characters one by one.Enter the new name (maximum 10 characters) and press <OK to confirm.• A validation tone is emitted and the screen returns to previous menu.7.2 Handset Tones7.2.1 Set the ring volumeDangerWhen the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing.There are 5 ringer volume options (BOOST, HIGH, MEDIUM, LOW and RINGER OFF). The default level is MEDIUM.Press m key in idle mode, scroll : to PERSONAL SET and press <OK, press <OK to enter HANDSET TONES and press <OK again to enter RING VOLUME.Scroll : to your desired volume level and press <OK to confirm.• A validation tone is emitted and the screen returns to previous menu.NoteWhen RINGER OFF is activated, the icon will be displayed on the screen.7.2.2 Set the ring melodyThere are 10 ring melodies available on your handset. Press m key in idle mode, scroll : to PERSONAL SET and press <OK, press <OK to enter HANDSET TONES, scroll : to RING MELODY and press <OK.Scroll : to your desired melody to play the melody.Press <OK to set the ring melody.• A validation tone is emitted and the screen returns to previous menu.7.2.3 Activate/deactivate keytoneA single tone is emitted when a key is pressed. You can enable or disable the key tone. By default, the key tone is ON.Press m key in idle mode, scroll : to PERSONAL SET and press <OK, press <OK to enter HANDSET TONES, scroll : to KEY BEEP and press <OK.Scroll : to ON or OFF and press <OK to confirm.• A validation tone is emitted and the screen returns to previous menu.1231212312cd155_ifu_master_en_us.book Page 27 Wednesday, October 24, 2007 6:46 PM
28 Personal settings7.3 Change the display languageYour handset can support different display languages. Press m key in idle mode, scroll : to PERSONAL SET and press <OK, scroll : to LANGUAGE and press <OK.Scroll : to your desired language and press <OK to confirm.• A validation tone is emitted and the screen returns to previous menu.TipOnce the display language is set, the option menus on the handset will switch to display in the selected language immediately. However, it will not change the language of the predefined outgoing message of your answering machine. 7.4 Activate/deactivate auto hang-upThis function enables you to end a call automatically by simply placing the handset on the base station. By default, the Auto Hang up feature is ON.Press m key in idle mode, scroll : to PERSONAL SET and press <OK, scroll : to AUTO HANG-UP and press <OK.Scroll : to ON or OFF and press <OK to confirm.• A validation tone is emitted and the screen returns to previous menu.1212cd155_ifu_master_en_us.book Page 28 Wednesday, October 24, 2007 6:46 PM
Clock and Alarm 298 Clock and AlarmThis feature allows you to set the date, time and alarm settings for your phone. The default date and time is 2008/01/01 and 00:00 am respectively. 8.1 Set date and timePress m in idle mode, scroll : to CLOCK & ALARM and press <OK, press <OK to enter SET DATE/TIME.The last stored date is displayed. Enter the current date (YYYY/MM/DD) and press <OK.The last stored time is displayed. Enter the current time (HH:MM) and scroll : to select am or pm. Press <OK to confirm.• A validation tone is emitted. STORED is displayed for 2 seconds and the screen returns to idle mode.NoteAn error tone will be emitted if an invalid digit is entered in the date/time fields. Hour: 00 to 12; Minute: 00 to 59Date: 01 to 31; Month: 01 to 12WarningIf your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider. Please check the date & time settings in your ISDN system or contact your network provider. 8.2 Set date/time formatYou can set your preferred date/time format for your phone. The default format is MM/DD and 12 HRS.8.2.1 Set time formatPress m in idle mode, scroll : to CLOCK & ALARM and press <OK, scroll : to FORMAT and press <OK.Press <OK to enter TIME FORMAT.• The current setting is displayed.Scroll : to select time format display (12 HRS or 24 HRS) and press <OK to confirm. • A validation tone is emitted and the screen returns to previous menu.8.2.2 Set date formatPress m in idle mode, scroll : to CLOCK & ALARM and press <OK, scroll : to FORMAT and press <OK.Scroll : to enter DATE FORMAT.• The current setting is displayed.Scroll : to select date format display (DD/MM or MM/DD) and press <OK to confirm. • A validation tone is emitted and the screen returns to previous menu.8.3 Set alarmPress m in idle mode, scroll : to CLOCK & ALARM and press <OK, scroll : to ALARM and press <OK.123!1231231cd155_ifu_master_en_us.book Page 29 Wednesday, October 24, 2007 6:46 PM
30 Clock and AlarmScroll : to OFF, ON ONCE or ON DAILY and press <OK.If you select ON ONCE or ON DAILY, enter the time (HH:MM) for the alarm and scroll : to select am or pm. Press <OK to confirm. • A validation tone is emitted and the screen returns to previous menu.NoteThe alarm tone and alarm icon will only sound/blink for 1 minute when the alarm time is reached. To mute the alarm tone, simply press any key on the handset.8.4 Set alarm tonePress m in idle mode, scroll : to CLOCK & ALARM and press <OK, scroll : to ALARM TONE and press <OK.Scroll : to MELODY 1, MELODY 2 or MELODY 3 and press <OK to confirm.• A validation tone is emitted and the screen returns to previous menu.2312cd155_ifu_master_en_us.book Page 30 Wednesday, October 24, 2007 6:46 PM
Advanced settings 319 Advanced settings9.1 Change Master PINThe Master PIN is used for registration/unregistration of handsets and for accessing the answering machine remotely. The default Master PIN number is 0000. The maximum length of the Master PIN is 8 digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required.NoteThe default pin code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code.Press m key in idle mode, scroll : to ADVANCE SET and press <OK, scroll : to CHANGE PIN and press <OK.Enter the current Master PIN when prompted and press <OK to confirm. • The PIN entered will be shown as asterisks (*) on the screen.Enter the new PIN and press <OK.Enter the new PIN again and press <OK to confirm PIN change.TipIf you forget your PIN, you will need to reset your phone to its default settings. See “Reset unit” on page 30 for more details. 9.2 RegistrationThe procedures described below are the procedures that you will find in your handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. Additional handsets must be registered to the base unit before you can use them. Up to 4 handsets can be registered to one base station.The Master PIN is required before you can register or unregister handsets. NoteBy default, the Master PIN is 0000.Place your handset on the charging cradle of your base station.Within 5 minutes, the registration mode will be activated on the handset.“Press page key during 5 sec to register” is displayed on the screen. Follow this instruction. • Upon successful registration, a validation tone is emitted and the handset numbers (1-4) will be assigned by the base automatically.NoteIf the registration do not start, you will need to register your handset manually. (see section below) To register your handset manually:On the base station, press and hold V for approximately 5 seconds. On the handset, press m key, scroll : to ADVANCE SET and press <OK, scroll : to REGISTER and press <OK.NoteIf no action is taken on the handset within 123412312cd155_ifu_master_en_us.book Page 31 Wednesday, October 24, 2007 6:46 PM
32 Advanced settings10 seconds, the registration procedure will be aborted. If this happens, repeat Step 1.Enter the Master PIN when prompted and press <OK to confirm. NoteBy default, the Master PIN is 0000. NoteIf no action is taken on the handset within 10 seconds, the registration procedure will be aborted. If this happens, repeat Step 1.If no base is found within a certain period, BASE NOT FOUND! will be displayed with an error tone to indicate failed registration and the handset returns to idle mode.9.3 UnregisterPress m key in idle mode, scroll : to ADVANCE SET and press <OK, scroll : to UNREGISTER and press <OK.CONFIRM? is displayed on the screen. Press <OK to confirm.Scroll : to select the handset number to unregister and press <OK.• A validation tone is emitted to indicate successful unregistration and the screen returns to idle mode.NoteIf no action is taken on the handset within 15 seconds, the unregistration procedure will be aborted and the handset returns to idle mode.To unregister a handset that does not belong to the CD150/155 range, you can only use the CD150/155 handset to unregister it. 9.4 Reset unitYou can reset your phone to its default settings with this feature. WarningUpon reset, all your personal settings, call log and redial list entries will be deleted and the phone will return to its default settings. However, your phonebook will remain unchanged after reset.Note You may have to configure your phone once again.Press m key in idle mode, scroll : to ADVANCE SET and press <OK, scroll : to RESET UNIT and press <OK.CONFIRM? is displayed on the screen. Press <OK again to confirm.• A validation tone is emitted.• The unit is reset to its default settings. (see “Default settings” on page 34) 9.5 Set area codeThis feature is useful when you have subscribed to Caller Line Identification service. It allows you to set an area code in your CD155. Once the local area code is set, the phone automatically filtersthe area code for all incoming calls, by removing the area code for local calls and retaining the area code for calls from other areas. If it is a local call, then only the phone number of the caller is displayed during an incoming call or when you call the number from the call log. If it is a long distance call, then both the area code and phone number 3123!123cd155_ifu_master_en_us.book Page 32 Wednesday, October 24, 2007 6:46 PM
Advanced settings 33will be displayed in a proper format to be dialed out directly from the call log, or saved into the phonebook.NoteYou can enter a maximum of 4 digits for the area code. You need to subscribe to Caller Line Identification service to be able to see the caller’s number or name in the call log. See “Using the Call log” on page 23 for details.Press m in idle mode, scroll : to ADVANCE SET and press <OK, scroll : to AREA CODE and press <OK.Enter the local area code (maximum 4 digits) and press <OK to save.• A validation tone is emitted and the screen returns to previous menu.9.6 Set prefixThis feature allows you to define a prefix number to be added to the beginning of a number during predialling (see “Predialling” on page 18). You may also use this feature to add a detect string to match and replace the first few digits of the number during predialling. You can enter up to a maximum of 5 digits for the detect string and auto prefix number respectively. Press m key in idle mode, scroll : to ADVANCE SET and press <OK, scroll : to AUTO PREFIX and press <OK.DETECT DIGIT is displayed on the screen. Press <OK to enter.• The last stored detect string is displayed (if any). Enter a detect string number (maximum 5 digits) and press <OK to confirm. PREFIX NB is displayed on the screen. Press <OK to enter. • The last stored prefix number is displayed (if any). Enter the prefix number (maximum 10 digits) and press <OK to confirm.• A validation tone is emitted and the screen returns to previous menu.NoteIf no detect string (blank) is entered, the prefix number will be automatically added to the predial number after r key is pressed. For numbers starting with *, # or P, the prefix number will not be added to the predial number after r key is pressed.9.7 Change recall timeRecall time (or dial delay) is the time delay by which the line will be disconnected after you press r key. It can be set to short, medium or long.The default value of recall time that is preset in your handset should be the best suited for your country network and therefore you should not need to change it.Press m key in idle mode, scroll : to ADVANCE SET and press <OK, press <OK to enter RECALL TIME.Scroll : to SHORT, MEDIUM or LONG and press <OK to confirm.• A validation tone is emitted and the screen returns to previous menu.121234512cd155_ifu_master_en_us.book Page 33 Wednesday, October 24, 2007 6:46 PM
34 Advanced settings9.8 Change the dial modeThe default value for dial mode that is preset in your handset should be the best suited for your country network and therefore you should not need to change it. There are two dial modes: Tone or Pulse.Press m key in idle mode, scroll : to ADVANCE SET and press <OK, scroll : to DIAL MODE and press <OK.Scroll : to TONE or PULSE and press <OK to confirm.• A validation tone is emitted and the screen returns to previous menu.9.9 Set first ringWhen this function is set to Off, the first ring from a voice call will not sound. This is particularly useful in countries where calling line identity is sent after the first ring. Consequently, the phones in the house will not ring when a message arrives.Press m in idle mode, scroll : to ADVANCE SET and press <OK, scroll to FIRST RING and press <OK.Scroll : to ON or OFF and press <OK to confirm. • A validation tone is emitted and the screen returns to previous menu.9.10 Default settingsRinger Volume MEDIUMRinger Melody MELODY 1Earpiece Volume VOLUME 2Key Tone ONLanguage Country dependentAuto Hang Up ONHandset Name PHILIPS1212Time/Date 2008/01/01; 00:00amTime format 12 HRSDate format MM/DDDialing Mode Country dependentRecall Time Country dependentFirst Ring Country dependentMaster PIN 0000Alarm OFFAlarm Tone MELODY 1Auto Prefix EMPTYArea Code EMPTYAnswering MachineAnswer Mode ANSWER & REC modeNumber of rings before answer5Outgoing MessagesEMPTYHandset screening OFFRemote access DEACTIVATEDBase speaker LEVEL 5cd155_ifu_master_en_us.book Page 34 Wednesday, October 24, 2007 6:46 PM
Telephone answering machine (TAM) 3510 Telephone answering machine (TAM)Your phone features an answering machine that records unanswered calls when it is activated. The answering machine can store up to 99 messages. The maximum recording time is 12 minutes.You can use the control keys on the base station to perform the basic functions of the answering machine such as paging, message playback, deleting messages and adjustment of volume on the base station. For a description of each function of the control keys on the base station, please see “Overview of the base station” on page 13 for more details.You can also use the answer machine menu on the handset to access the answering machine functions and to set the answering machine options. To begin, press o key on your base station to switch on the answering machine. Alternatively, you may switch on the answering machine via your handset (see “Switch the answering machine on/off via handset” on page 36). 10.1 Play10.1.1 Playback of new messages via handsetThe last recorded message is played first via the loudspeaker. When all new messages have been played, the answering machine will stop and the icon stops blinking.Press m key in idle mode, scroll : to ANS. MACHINE and press <OK, press <OK to enter PLAY menu. Alternatively, press u to enter call log, scroll : to select ANS. MACHINE and press <OK twice to enter PLAY menu.• The message number is displayed on the screen during playback. During playback, the screen displays "NEW XX/YY", which represents current message played/total number of new messages. The date and time of the current message is displayed below the message number.During playback, you can:Adjust volume Press : key.Stop playback Press cBACK to return to PLAY menu.Repeat Press <OK and press <OK to enter REPEAT.Next message Press <OK, scroll : to NEXT and press <OK.Previous messagePress <OK, scroll : to PREVIOUS and press <OK.Delete messagePress <OK, scroll : to DELETE and press <OK. A validation tone is emitted and the screen returns to previous menu.12cd155_ifu_master_en_us.book Page 35 Wednesday, October 24, 2007 6:46 PM
36 Telephone answering machine (TAM)10.1.2 Playback of old messages via handsetOld messages can only be played if there are no new messages. The first recorded message will start to play until the last recorded message. Press m key in idle mode, scroll : to ANS. MACHINE and press <OK, press <OK to enter PLAY menu.Press <OK to start playback• The first recorded message will start to play until the last recorded message. During message playback, you can press <OK to select the available options (see options available under “Playback of new messages via handset” on page 35). 10.2 Delete all messagesWarningMessages deleted cannot be recovered.Note Unread messages will not be deleted. Press m key in idle mode, scroll : to ANS. MACHINE and press <OK, scroll : to DELETE ALL and press <OK.CONFIRM? is displayed on the screen. Press <OK again to confirm deletion of all your messages.• A validation tone is emitted and the screen returns to previous menu.10.3 Switch the answering machine on/off via handsetPress m key in idle mode, scroll : to ANS. MACHINE and press <OK, scroll : to ANSWER ON/OFF and press <OK.Scroll : to ON or OFF and press <OK to confirm.• A validation tone is emitted and the screen returns to previous menu. 10.4 Record your personalised outgoing message (OGM)This personal outgoing message replaces the default ones. To revert to the default outgoing message, simply delete the personal outgoing message you have recorded. If you are not satisfied with the recorded outgoing message, simply record a new message to overwrite the old one. Press m key in idle mode, scroll : to ANS. MACHINE and press <OK, scroll : to RECORD OGM and press <OK, Scroll to ANSWER ONLY or ANSWER & REC and press <OK to select the following outgoing message options:123!12Options available for Personalized OGMDescriptionPlay OGM* Press <OK to playback existing outgoing messages (if any)1212cd155_ifu_master_en_us.book Page 36 Wednesday, October 24, 2007 6:46 PM
Telephone answering machine (TAM) 37Note*If there is no existing personalized outgoing message, the screen will display NO MESSAGE and return to the previous menu.**When you record a new personalized outgoing message, the previous one is overwritten automatically.10.5 Set the answer modeThere are 2 answer modes available: Answer Only and Answer & RecordBy default, the answer mode is ANSWER & REC, by which your correspondent can leave a message on the answering machine.This can be changed to ANSWER ONLY mode, by which your correspond cannot leave any messages on the answering machine. Press m key in idle mode, scroll : to ANS. MACHINE and press <OK, scroll : to ANSWER MODE and press <OK.Scroll : to ANSWER ONLY or ANSWER & REC and press <OK.• The answer mode is set. Note Depending on the answer mode you have selected, the appropriate default outgoing message is played once the answering machine picks up an incoming call.10.6 Answering machine settings10.6.1 Ring delayThis is the number of rings before the answering machine answers and starts playing your greeting message. You can set the answering machine to start playing your greeting message after 2 to 7 rings or Economy. The default ring delay is 5.Press m key in idle mode, scroll : to ANS. MACHINE and press <OK, scroll : to SETTINGS and press <OK, press <OK to enter RING DELAY.Scroll : to your desired ring delay setting (2 to 7 RINGS or ECONOMY) and press <OK to confirm.• A validation tone is emitted and the screen returns to previous menu. TipToll saver mode can save you the cost of a long-distance call when you check your messages remotely. If there are new messages in your answering machine, the outgoing message will start playing after 2 rings. If there are no new messages, the outgoing message will be played after 4 Record Messages**Press <OK to start recording the outgoing message, press <OK again to stop and save the recording and play back the recorded outgoing message. Press cBACK at any time to abort the recording and return to the previous menuNoteThe maximum length of an outgoing message is 1 minute. Delete OGMPress <OK to delete the personalized outgoing message and change back to default OGM.1212cd155_ifu_master_en_us.book Page 37 Wednesday, October 24, 2007 6:46 PM
38 Telephone answering machine (TAM)rings. Hence, if you want to check if you have any messages without incurring call charges, you can hang up the call after the 3rd ring.10.6.2 Remote control accessIf you are far away from home and want to check the messages on your answering machine, you can make use of the remote access feature to check your messages using another phone. Once you dial your home number from any other phone and enter the remote access code*, you will be able to obtain the messages on your answering machine. The keypad on the phone you use to dial acts like the functions on your answering machine where you can play or delete messages, turn your answering machine on or off, etc. NoteThis feature is deactivated by default. * Remote access code (which is the same as your Master PIN code) prevents any unauthorised remote access of your answering machine. 10.6.2.1 Activate/deactivate remote accessPress m key in idle mode, scroll : to ANS. MACHINE and press <OK, scroll : to SETTINGS and press <OK, scroll : to REMOTE ACCESS and press <OK.Scroll : to ACTIVATE or DEACTIVATE and press <OK to confirm.• A validation tone is emitted and the screen returns to previous menu. 10.6.2.2 Controlling the answering machine from an external callFrom another phone, dial home. • The answering machine answers and starts playing your greeting message.Within 8 seconds, press # key on the phone you used to dial and enter the remote access code (same as your Master PIN code).• If the access code is incorrect, an error tone will be emitted. After the error tone is emitted, you can try to press the remote access code again until you enter the correct number.• The answer machine will drop the line immediately if there is no detection of the master PIN entry within 8 seconds. • If the remote access code is correct, a validation tone can be heard. The following table indicates how to access the below features during remote access procedure:12Keys Description1 Return to previous message2 Play the message3 Skip to next message6 Delete current message7 Turn on the answering machine8 Stop message playback9 Turn off the answering machine12cd155_ifu_master_en_us.book Page 38 Wednesday, October 24, 2007 6:46 PM
Telephone answering machine (TAM) 39 NoteIf the answering machine is off, the phone will enter into the remote access mode after 10 rings. Enter the remote access PIN (default is 0000) to activate the remote access feature.10.6.3 Set voice languageThis menu allows you to change the language of the predefined outgoing message. The availability of this menu and the language options available are country dependent.Press m in idle mode, scroll : to ANS. MACHINE and press <OK, scroll : to SETTINGS and press <OK, scroll : to VOICE LANGUAGE and press <OK.• The current selected language is highlighted.Scroll : to your preferred language and press <OK to confirm.• A validation tone is emitted and the screen returns to previous menu.# Enter the remote access code if the answering machine is on and outgoingmessage is playing.12cd155_ifu_master_en_us.book Page 39 Wednesday, October 24, 2007 6:46 PM
40 Technical data11 Technical dataDisplay• Progressive LCD backlight• The backlight remains on for 15 seconds after each activation such as an incoming call, key presses, lifting the handset off the base station, etc. • The colour of the LCD backlight is Amber.General telephone features• Dual mode caller name & number identification• 5 standard ringer melodies and 5 polyphonic ringer melodiesPhonebook list, Redial list and Call log• Phonebook list with 50 entries• Redial list with 5 entries• Call log with 10 entriesBattery• 2 x HR AAA NiMh 550 mAh batteriesPower consumption• Power consumption at idle mode: around 800mWTemperature range• Operation: Between 0 and 35º C (32 to 95º F).• Storage: Between -20 and 45º C (-4 to 113º F).Relative humidity• Operation: Up to 95% at 40°C• Storage: Up to 95% at 40°C CD155_IFU_11_technical_data.fm Page 40 Wednesday, October 24, 2007 6:58 PM
Frequently asked questions 4112 Frequently asked questions www.philips.com/supportIn this chapter, you will find the most frequently asked questions and answers about your phone.ConnectionThe handset does not switch on!• Charge the batteries: Put the handset on the base station to charge. After a few moments, the phone will switch on.The handset does not charge!• Check charger connections. icon is not blinking during charge!• Battery is full: There is no need to charge the battery.• Bad battery contact: Adjust the handset slightly.• Dirty contact: Clean the batteries contact with a cloth moistened with alcohol.Communication is lost during a call!• Charge the battery• Move closer to the base station.The phone is "Out of range"!• Move closer to the base station.Set-upSEARCHING... is displayed on handset and icon is blinking!• Move closer to the base station.• Make sure that your base station is on.• Reset your unit and restart handset registration.SoundHandset does not ring!Check that the RING VOLUME is not set to RINGER OFF, and make sure icon is not displayed on the screen (see “Set the ring volume” on page 27).Caller does not hear me!Microphone may be muted: During a call, press M.There’s no dialling tone!• No power: Check the connections. • Batteries are empty: Charge the batteries.• Move closer to the base station.• Wrong line cable used: Use the line cable provided. • Line adaptor is required: Connect the line adaptor to the line cord.cd155_ifu_master_en_us.book Page 41 Wednesday, October 24, 2007 6:46 PM
42 Frequently asked questionsCaller does not hear me clearly!• Move closer to the base station.• Move the base station at least one metre away from any electronic appliances.Frequent noise interference on my radio or television!• Move the base station as far away as possible from the electrical appliances.Product behaviourKeypad does not work!• Unlock your keypad: Long press * in idle mode.The handset warms up when making a long call!• This is a normal behavior. The handset consumes energy while calling.The handset cannot be registered to the base station!• Maximum number of handsets (4) has been reached. To register a new handset, unregister an existing handset.• Remove and replace the handset batteries.• Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset (see “Registration” on page 31).Caller number is not displayed!• Service is not activated: Check your subscription with your network operator.My handset keeps going into idle mode!• If there are no key presses for 15 seconds, the handset will automatically return to idle mode. It will also return to idle mode automatically when you place the handset back on the base station.Phonebook entry cannot be stored and MEMORY FULL is displayed!• Delete an entry to free memory before saving your contact again.The Master PIN code is wrong!• The default master PIN is 0000. • Reset the handset to revert to the default master PIN code if it has been changed before (see “Reset unit” on page 32).The answering machine does not record messages!• Memory is full: Delete your old messages.•The ANSWER ONLY mode has been activated. Deactivate ANSWER ONLY and activate ANSWER & REC mode (see “Set the answer mode” on page 37).Remote control access does not work!• Activate Remote Control Access (see “Remote control access” on page 38).The phone hangs up during remote access!• You have taken more than 4 seconds to enter the Master PIN code. Enter the code again within 4 seconds.Answering machine stops before the recording is finished!• Memory is full: Delete your old messages.cd155_ifu_master_en_us.book Page 42 Wednesday, October 24, 2007 6:46 PM
Index 4313 IndexAAccessories 9Alarm 29Alarm tone 30Answer a call 19Answer an external call 25Answering machine mode 37Auto hang-up 28CCall in progress 20Call log 18, 23Call screening 39Chain dialling 26Charge battery 15Clock and alarm 29Conference call 25Connect base station 14DDate and time 29Default settings 34Delete a call list entry 24Delete a redial number 23Delete call list 24Delete phonebook 22Delete redial list 23Dial mode 34Direct dialling 18Display icons 12EEnd a call 19HHandset name 27Handset tones 27Handsfree answering 19IInstall battery 14Install phone 14Intercom 25KKey tone 27Keypad lock/unlock 20LLanguage 28LCD Backlight 40LED indicator 13Loudspeaker mode 20Loudspeaker volume 21MMake a call 18Master PIN 31Menu structure 16Mute 20OOverview of the base station 13Overview of your phone 10PPaging 26Phonebook 19, 21Predialling 18Prefix 33RRecall time 34Recycle your batteries 8Redial list 18, 23Registration 31Remote control access 38Reset unit 32cd155_ifu_master_en_us.book Page 43 Wednesday, October 24, 2007 6:46 PM
44 IndexRing delay 37Ring melody 27Ring volume 27SSave a redial number 23Set area code 33Store a contact 21Switch handset on/off 20TTelephone answering machine 35Text or number entry 20Transfer an external call 25UUnmute 20Unregister 32VVolume 20cd155_ifu_master_en_us.book Page 44 Wednesday, October 24, 2007 6:46 PM
ENGLISHcd155_ifu_master_en_us.book Page 45 Wednesday, October 24, 2007 6:46 PM
© 2007 Koninklijke Philips Electronics N.V.All rights reservedReproduction in whole or in part is prohibited without the written consent of the copyright ownerDocument number: 3111 285 XXXXX P r i n t e d i n C h i n a cd155_ifu_master_en_us.book Page 46 Wednesday, October 24, 2007 6:46 PM

Navigation menu