PARROT CK5050PEA BLUETOOTH MODULE, HANDS FREE CAR KIT User Manual CK5050 Datasheet 1 02

PARROT BLUETOOTH MODULE, HANDS FREE CAR KIT CK5050 Datasheet 1 02

USERS MANUAL

1 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function Hands Free Car Kit Module CK5050+ Datasheet Product Scope Parrot has identified a demand for the integration of the telephony into a host product like car radio or navigation system. The answer to this demand is CK5050+. The CK5050+ is a feature-rich Bluetooth Hands Free Car Kit solution dedicated for the integration of Handsfree Bluetooth applications in car radios and car telematics systems.
2 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function 1 PRODUCT OVERVIEW 3 1.1 CK5050+ Features 3 1.2 Memory Flash required 4 2 ELECTRICAL ARCHITECTURE 5 2.1 CK5050+ internal Block Diagram 5 2.2 Electrical Interfaces Characteristics 6 2.3 Main Connector Pinout 8 3 HARDWARE LAYOUT 10 3.1 Components placement with internal antenna (PI040123AA) 10 3.2 Components placement without internal antenna (PI040114AA - PI040124AA) 12 4 SOFTWARE SPECIFICATIONS 14 4.1 Bluetooth Stack 14 4.2 Bluetooth Profiles Supported 14 4.3 Software Architecture 14 4.4 Software Interface 15 5 MECHANICAL DESIGN 16 5.1.1 Shielding 16 5.1.2 CK5050+ versions 18 5.1.3 Integration on the motherboard 19 5.1.4 CK5050+ mechanical design 20 6 DEVELOPMENT TOOLS 23 7 FCC REQUIREMENTS FOR MODULE APPLICATION 25 8 ANNEXE 1: CK5050+APPLICATION (EXAMPLE) 26
3 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function 1 Product Overview This document is the Datasheet of the Parrot CK5050+ Bluetooth Module. The CK5050+ is a feature-rich Bluetooth platform dedicated for the integration of Bluetooth applications in car audios, car telematic systems or any systems requiring a complete embedded Bluetooth solution. 1.1 CK5050+ Features  Bluetooth connectivity • Bluetooth Power Class 2 Radio • Embedded Bluetooth v1.1, v1.2 & v2.0 compliant • Embedded profiles • Compatible with all Bluetooth phones • Pairing and connection with all Bluetooth Devices: Phones, Smartphones, PDA … • Multiple user support: Up to 5 paired phones • Multiple connection (up to 3 device connected at the same time) • Multiple profile (for example A2DP and HFP at the same time with same or different devices)  Phone • Pick-up, Hang-up, Redial • Automatic answer (from host via dial command) • Send DTMF during calls • Private Mode  Phone Book • Automatic Phone book synchronization over Bluetooth (up to 1000 names) • Call history (dialed number, received calls, missed calls) • All Synchronization Methods • Full Unicode for compatibility with numerous characters sets (European, Russian, Chinese, Japanese…)  Digital Signal Processing and Acoustics • Acoustic Echo cancellation for Full Duplex operation • Noise reduction • Beam forming with 2 microphones inputs • Volume control • Speaker dependant voice recognition (trained names and keyword) • Speaker independent voice recognition (Nuance licensing) • Text To Speech feature.  Audio Streaming • Embedded SBC decoder • Embedded MP3 decoder from Thomson Licensing (optional) • Stereo audio output  Miscellaneous • Provide Phone Battery Level and Network Level, Carrier Name (depends on phones) • Embedded test pattern  Software Update • Full standard Software available (free upgrade from Parrot homepage) • Software update available through Bluetooth or UART • Very large compatibility with Phones, Smartphones, PDAs, Music players  USB • USB 2.0 Full Speed • Access to mass storage device • File browsing
4 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function 1.2 Memory Flash required • Flash required for the CODE: Around 2Mbytes • Flash required for the user Data (settings, phonebook…) : Around 4 MBytes • Flash required for speaker independent voice recognition and text to speech: Voice recognition only: 3 Mbytes + 1.1 Mbytes per language Voice recognition and Text To Speech: 7 Mbytes + 16 Mbytes per language Example for 1 language: Code Data Required Memory Flash VR + TTS 23 MBytes 2 MBytes 4 MBytes 29 MBytes 256 MBits VR only 4.1 MBytes 2 MBytes 4 MBytes 10.1 MBytes 128 Mbits Example for 6 languages: Code Data Required Memory Flash VR + TTS 103 MBytes 2 MBytes 4 MBytes 109 MBytes 1 GBits VR only 9,6 MBytes 2 MBytes 4 MBytes 15.6 MBytes 128/256 Mbits
5 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function 2 Electrical Architecture 2.1 CK5050+ internal Block Diagram CK5050+ Simplified Block Diagram The main electrical interfaces provided by the CK5050+ are: • Bluetooth: 2.0 EDR • Audio: Digital I2S interface: 1 stereo input + 2 stereo output (need to have an I2S codec on the motherboard) Analog interface: 2 audio inputs • Serial Link : UART for the software interface through AT commands • 2 x USB 2.0 OTG • I²C Interface • 3.3 V Power Supply • Flash : 256Mbits / 512Mbits / 1Gbits • SDRAM: 64Mbits/ 128Mbits
6 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function 2.2 Electrical Interfaces Characteristics Absolute Maximum Rating Min Max Unit Supply Voltage -0.3 3.8 V Storage Temperature -40 +125 °C Operating Conditions Min Max Unit Supply Voltage 3,2 3.6 V Ambiant Temperature -40 +85 °C  UART: 16C550 Compatible Type. A bit “Start Bit=0” is added to the beginning of each word (8bits). The Least Significant Bit (LSB) is sent first. A “Stop Bit=1” is sent by the transmitter at the end of each word. MaxVOL=0.15V MinVOH=Vcc-0v15 (at IOH=0.1mA) open collector with build in 2.5k pull up MaxVIL=0.8V MinVIH=2V UART0_TX & UART1_TX: Min Max Condition Trise (ns) 10 Cload = 50pF Tfall (ns) 10 Cload = 50pF The UART1_RX and UART0_RX are Schmitt trigger inputs  I2C MaxVOL=0.15V MinVOH=Vcc-0v15 MaxVIL=0.8V MinVIH=2V  RESET: Asynchronous reset signal, used to reset the Parrot Daughter Board, active low. MaxVIL=0.4V MinVIH=2.5V  MIC_PWR: Connect to electret condenser microphone (Impedance less than 2.2kOhms) Electrical characteristics of microphone: Operating voltage: 2..02V-2.48V DC Current consumption: 500µA max. Use of pre-amplified microphones is in option. Optional: another power supply (from motherboard) can be used to supply the microphone(s)  VCC: Supply voltage 3.4V(-0.2V/+0.2V) including tolerances, thermal changes, noise over/under shoot due to load change and/or car battery voltage change, load dump. Mean current : <300 mA (All components active and communication or streaming mode) Peak current < 1.5A during switch on: > mA during 700 ms (max).
7 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function POWER CONSUMPTION FUNCTIONING MODES CURRENT ON 3.4V REMARKS STOP MODE <20 µA BT radio and Parrot5+ ASIC stopped, Internal voltage regulator switched off.(Power off or Reset active) STANDBY MODE <200 mA BT module in sniff mode, Parrot ASIC in idle HANDSFREE MODE <300 mA Hands free communication with a Bluetooth enabled phone AUDIO STREAMING <300 mA Reception of an encoded stream, decoding, playing of the audio
8 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function 2.3 Main Connector Pinout Main connectors: Male connector: Female connector: The following pinout allows an interface to the CK5050+ according to market standards: The following pinout allows an interface to the CK5050+ according to market standards:
9 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function PIN FUNCTION INPUT / OUTPUT COMMENT 1 RIN I Line in : right input 2 LIN I Line in : left input 3 MIC1N I 4 MIC2N I 5 MIC1P I 6 MIC2P I Microphones : Analog audio inputs 7 MIC_PWR O Microphone power supply 8 VSS I Ground 9 BOOTS I To update the soft 10 NRESET I RESET trigger Input 11 USB0_VBUS I USB0 Vbus 5V 12 USB1_VBUS I USB1 Vbus 5V 13 USB0_ID I USB0 ID pin of mini AB receptacle (OTG) 14 USB1_ID I USB1 ID pin of mini AB receptacle (OTG) 15 USB0_DRV_VBUS O Drive VBUS (OTG) USB0 16 USB1_DRV_VBUS / IPOD_READY O/I Drive VBUS (OTG) USB1 / Connected to IPOD_Authentication_Coprocessor 17 USB0_D- O/I USB0 interface D- signal 18 USB1_D- O/I USB1 interface D- signal 19 USB0_D+ O/I USB0 interface D+ signal 20 USB1_D+ O/I USB1 interface D+ signal 21 VSS I Ground 22 VSS I Ground 23 VCC I POWER 3.4V 24 VCC I POWER 3.4V 25 VSS I Ground 26 VSS I Ground 27 U1_IN I 28 U1_OUT O 16C550 Compatible type (for Debug interface) 29 U0_IN I 30 U0_OUT O 16C550 Compatible type (for Host AT commands and Flash Update interface) 31 I2C_CLK O I2C clock 32 I2C_DA O/I I2C data 33 VSS I Ground 34 VSS I Ground 35 I2S_CLK O/I I2S serial clock 36 I2S_IN I I2S serial data in 1 37 I2S_MCLK O/I I2S Master clock 38 I2S_OUT1 O I2S serial data out 39 I2S_SYNC O/I I2S synchronization 40 I2S_OUT2 O I2S serial data out (secondary)
10 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function 3 Hardware layout 3.1 Components placement with internal antenna (PI040123AA) Details: U100: Parrot5+ ASIC (BGA) + U101/U102: SDRam/Flash (BGA) + U802 BT radio transceiver (BGA) + U1702: 1V8 Voltage regulator (DFN8) + U1700: 1V2 Voltage regulator (DFN8) + U1701: Voltage supervisor (TSOT8) +U600: ADC (QFN) +X800: Precision crystal oscillator + J001: Main connector COMPONENTS SIDE 1
11 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function BOTTOM SIDE PCB size: 32mm x 50.7mm Tolerances +/- 0.1 mm
12 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function 3.2 Components placement without internal antenna (PI040114AA - PI040124AA) COMPONENTS SIDE 1
13 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function BOTTOM SIDE PCB size: 32mm x 49.7mm Tolerances +/- 0.1 mm
14 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function 4 Software Specifications 4.1 Bluetooth Stack  HCI (Host Controller interface),  L2CAP (Logical Link Control and Adaptation Protocol),  RFCOMM (TS011...),  SDP (Service Discovery Protocol),  OBEX (IrDA Object Exchange). 4.2 Bluetooth Profiles Supported  Generic Access Profile  GAP  Phone Management • HFP 0.96 - 1.0 - 1.5 • HSP 1.0  Message Management • MAP 1.0  Phone Book • PBAP 1.0 • SYNC 1.1 (IrMC SYNC over BT) • SYNCML • OPP 1.0 Server/Client (Vcard 2.1) • GSM 07.07 AT Commands • Nokia synchronization protocol  Multimedia • A2DP (Audio) • SBC decoding • (optional MP3 decoding) • AVDTP • AVRCP  Others • SPP 1.1 • BNEP, PAN • FTP 1.0 • Image transfer over OPP • DUNP 1.1 • Software update over SPP • Remote configuration 4.3 Software Architecture See Bluetooth Stack Software Specification (Confidential).
15 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function 4.4 Software Interface The main target of the software interface is to provide a high level command set, hiding the internal complexity of the Bluetooth function and the variability of its standard across different devices. This software interface is based on well-known AT commands. Some of these commands are directly derived from the GSM 07.07 recommendation and from the appropriate Bluetooth profiles. Some supplementary commands are used to manage Bluetooth related functions like device pairing and connection management as well as the acoustic and speech recognition functions. AT Command List and Bluetooth AT Command Software Specification is available. BLUES supports Unicode, which allows the management of accents and phonebook in any language. BLUES is also very friendly with a flexible MMI. One can use BLUES with a simple single or double key interface as well as a diversity of graphic displays.
16 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function 5 Mechanical Design The CK5050+ features a male connector allowing a connection to the motherboard through a female connector. Board to Board Main Connector  40 PIN connector  0.5mm pitch double row 5.1.1 Shielding  SHIELDING PART1
17 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function PART2
18 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function 5.1.2 CK5050+ versions CK5050+ VERSIONS PI Number Connector type Bluetooth Antenna Model PI040114 Female (9 mm) External CK5050+FEA PI040123 Male Internal CK5050+MIA PI040124 Male External CK5050+MEA  CK5050+ WITH MALE CONNECTOR • CK5050+ 40R-JMCS-G-TF from JST • Host 40P3.0-JMCS-G-TF Or 40P10.0-JMCS-G-TF  CK5050+ WITH FEMALE CONNECTOR • CK5050+ 40P9.0-JMCS-G-B-TF from JST • Host 40RF-JMCS-G-1-TF from JST (Absorption misalignment type)
19 (26) Created by : Reference Title David COROLLEUR DC-2008-029 Hands Free Car Kit Module CK5050+ - Datasheet Revised by : Date edition N° : David COROLLEUR 15/04/2008 1.01 Approved by : Date Function 5.1.3 Integration on the motherboard
Prepared David COROLLEUR Title CK5050+ Datasheet Approved Hocine BELKHOUDJA Date 15/04/08 Revision 1.01 File CK5050+_Datasheet_1.02.doc PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050+ Part Numbers 20 20 5.1.4 CK5050+ mechanical design  CK5050+ WITH EXTERNAL ANTENNA (PI040114AA) Mechanical dimensions (Tolerances: -0.1/0.1 mm for the thickness and -0.2/0.2 mm for length and the width) with external BT antenna The holes highlighted in are the holes where the shielding is soldered
Prepared David COROLLEUR Title CK5050+ Datasheet Approved Hocine BELKHOUDJA Date 15/04/08 Revision 1.01 File CK5050+_Datasheet_1.02.doc PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050+ Part Numbers 21 21  CK5050+ WITH PCB ANTENNA (PI040123AA) Mechanical dimensions (Tolerances: -0.1/0.1 mm for the thickness and -0.2/0.2 mm for length and the width) with internal BT antenna The holes highlighted are the holes where the shielding is soldered
Prepared David COROLLEUR Title CK5050+ Datasheet Approved Hocine BELKHOUDJA Date 15/04/08 Revision 1.01 File CK5050+_Datasheet_1.02.doc PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050+ Part Numbers 22 22  CK5050+ WITH EXTERNAL ANTENNA (PI040124AA) Mechanical dimensions (Tolerances: -0.1/0.1 mm for the thickness and -0.2/0.2 mm for length and the width) with external BT antenna The holes highlighted red are the holes where the shielding is soldered
Prepared David COROLLEUR Title CK5050+ Datasheet Approved Hocine BELKHOUDJA Date 15/04/08 Revision 1.01 File CK5050+_Datasheet_1.02.doc PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050+ Part Numbers 23 23 6 Development Tools  Demo board available  Host Software Interface specification  Host software example with C++ source code. CK5050 WORKBENCH/TOP SIDE VIEW
Prepared David COROLLEUR Title CK5050+ Datasheet Approved Hocine BELKHOUDJA Date 15/04/08 Revision 1.01 File CK5050+_Datasheet_1.02.doc PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050+ Part Numbers 24 24 CK5050 WORKBENCH/BOTTOM SIDE VIEW (not released)
Prepared David COROLLEUR Title CK5050+ Datasheet Approved Hocine BELKHOUDJA Date 15/04/08 Revision 1.01 File CK5050+_Datasheet_1.02.doc PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050+ Part Numbers 25 25 7 FCC Requirements for module application FCC ID: RKXCK5050PEA In accordance with FCC Part 15, the CK5050+ is listed as a Limited Modular Transmitter device. In support of the Modular Transmitter Approval, the following is stated: • The module does have buffered modulation / data inputs. • The module does regulate its own power supply. • The module have its own RF shielding • The module can be tested as a stand-alone device. • The module is labeled with the proper FCC ID, and labeling instructions are provided to OEM end users for external product labels. • The module does have instruction for proper use. • The module does meet the FCC RF regulations. Limited Modular Transmitter Approval, is granted, instead of Modular Transmitter Approval, because the following condition is not met: • The module does not have a permanently attached antenna. • The applicant of the final device into which the module CK5050+ is installed is not required to obtain a new authorization for this. Moreover, module CK5050+ is also submitted to CE mark, Bluetooth certification, and is considered is an automotive product. This product respects FCC part 15 C requirements for a Bluetooth application. • Module CK5050+ is labelled with its own FCC number on its shielding, and, if the FCC ID is not visible when the module is installed inside final device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: RKXCK5050PEA” or “Contains FCC ID: RKXCK5050PEA.” Any similar wording that expresses the same meaning may be used. • Module CK5050+ can not be integrated in a final device which is connected to the AC power lines. It is necessary that final device must be supplied by a battery. • FCC RF exposure requirements: This device and its antenna(s) must not be collocated or operating in conjunction with any other antenna or transmitter. • THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. .
26 8 ANNEXE 1: CK5050+APPLICATION (example) DSP Audio Processor Parrot CK5050+ Microcontroller UART1 UART0 MIC1 MIC1P MIC1N MIC2P MIC2N ADC I2S UART I2S_IN1 I2S_OUT I2S_CLK I2S_SYNC Power VCC NRESET VSS P5+ Asic SDRAM : 64 Mbits Flash : 256 Mbits Bluetooth 2.0 EDR 3.3V Reset Vss CDRW Integrated MP3/WMA USB Connector I2S I2C I2S I2C UART USB 2.0 OTG USB1_D+ USB1_D- USB1_ID USB1_VBUS Drive Vbus 5V_USB USB1_DRV_VBUS Host AT commands and Flash Update Apple Authent. IC I2C I2C Debug Interface I2S_MCLK USB Connector USB0_D+ USB0_DRV_VBUS USB0_D- USB0_ID USB0_VBUS Drive Vbus LINE IN MICBIAS Microphones LIN RIN BOOTS BOOTS Audio input Selection : microphone inputs or Line In GPIO MIC2

Navigation menu