Ortek Technology WKP7110BT Bluetooth Keypad User Manual

Ortek Technology Inc Bluetooth Keypad

User Manual

Bluetooth Keypad User’s Manual WKP-7110BT Version 1.0 2015/04 ID NO :
About This Manual This manual is designed to assist users in installation and usage of the Bluetooth Keypad . Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Edition 1st Edition, Copyright © Copyright 2015 This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.
FEDERAL COMMUNICATIONS COMMISSION STATEMENT This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ♦ Reorient or relocate the receiving antenna. ♦ Increase the separation between the equipment and receiver. ♦ Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. ♦ Consult the dealer or an experienced radio/TV technician for help.
WARNING A shielded-type power cord is required in order to meet FCC emission limits and to prevent interference to nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Caution: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
1. INTRODUCTION Thank you for purchasing the Bluetooth Keypad. This User’s Manual contains information that will help to operate the keypad as well as answer questions about certain special keys and buttons. Please keep this manual in a safe place for future reference. 2. System Requirements • Microsoft Windows® XP / Vista/Windows 7/8 3. Device pairing z Turn on the Bluetooth connection on the notebook computer z Turn on the keypad power and press the “CONN.” button. (Please make sure the blue LED is flashing) z The notebook computer will search automatically. When “Bluetooth Keypad” shows, choose “Connect”. z Enter the pin code that display on the notebook computer and press “Enter”. z Start using the Bluetooth keypad.
Note: 1. After 30 minutes non-operation, the keypad will go to low-power mode. Please press any key to wake up. 2. Power ON/OFF also need to press any key to reconnect and wait the blue LED turn on before using. 4. Power Switch There is a power switch at back of the keypad. When not in use, please turn to OFF to save battery power. 5. Keys description Key location Usage 1 End Num Lock ON: Keypad 1 Num Lock OFF: End 2 ↓ Num Lock ON: Keypad 2 Num Lock OFF: ↓ 3 PgDn Num Lock ON: Keypad 3 Num Lock OFF: PgDn 4 ← Num Lock ON: Keypad 4 Num Lock OFF:← 5 Num Lock ON: Keypad 5 Num Lock OFF: No function 6 → Num Lock ON: Keypad 6 Num Lock OFF: → 7 Home Num Lock ON: Keypad 7 Num Lock OFF: Home
8 ↑ Num Lock ON: Keypad 8 Num Lock OFF: ↑ 9 PgUp Num Lock ON: Keypad 9 Num Lock OFF: Pg Up 0 Ins Num Lock ON: Keypad 0 Num Lock OFF: Ins 00 Num Lock ON & OFF: Keypad 0*2. Del Num Lock ON: Keypad . Num Lock OFF: Del / Num Lock ON & OFF: Keypad / * Num Lock ON & OFF: Keypad * - NumLockON&OFF:Keypad‐+ Num Lock ON & OFF: Keypad + Enter Keyboard Enter Bk Sp ← Keyboard Back Space Tab Keyboard Tab 7. Troubleshooting ¾ Bluetooth keypad Does Not Work • Make sure the battery is installed correctly • Check to see if the battery power is dead.

Navigation menu