Ortek Technology WKP300 Wireless Calculator Mobile Mini Keypad User Manual Revised Manual

Ortek Technology Inc Wireless Calculator Mobile Mini Keypad Revised Manual

Revised Manual

0 Wireless Calculator Mobile Mini Keypad User’s Manual Version: 1.0 2004/04 ID NO: PAK-82265123-00
1 Introduction Congratulations on your purchase of the WKP-300. This new wireless keypad combines special Tax, Euro and Currency rate calculating functions. It makes the calculation process more easily and more convenient. System Requirements  Microsoft® Windows® 98/Me/2000/XP and MAC OS compatible  One USB v. 1.1 or 2.0 Compliant Port Installation Connection with Windows®98/Me 1. Plug the USB receiver connector to your PC. 2. The Add New Hardware Wizard appears. 3. Click Next. The locate driver screen appears. 4. Select “Search for the best driver for your device. (Recommended),” and then click Next. The wizard searches for the appropriate device driver. 5. Click Finish to complete the driver installation. You are now ready to begin using your wireless keypad.
2 Windows 2000/XP Operating System 1. Plug the USB receiver connector to your PC. 2. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. You are now ready to begin using your wireless keypad Using the Wireless Calculator/Keypad Turning the keypad Off and On To turn on the keypad, press the CE/AC key, located directly above the number seven key. The keypad starts in calculator mode and displays “0”. The keypad automatically turns off itself after two minutes of non-operation. Or you can press the CE/AC key for two seconds and it will turn off. ID setting Plug the receiver into your notebook’s USB port and turn on the wireless keypad. The LED of the receiver will start flashing. Press the ID button under the keypad, the LED will turn off. It means the ID setting accomplished.
3  Description of the function keys Key Functions Definition M+ Adds the current display from the content of memory. M- Subtracts the current display from the content of memory. MRC I. First push, as MR key, transfers the contents of the memory register into the display register. II. Second push, as MC key, clears the memory. DEC I. Specifies the number of decimal places for rounding II. In keypad mode, as the TAB function. +/- Switches the sign of the displayed value between positive (+) and negative (-). % I. Use this key in combination with arithmetic operator keys to perform percent. II. Setting TAX rate. € I. Setting Euro rate. II. In keypad mode, can input “€” symbol.
4 CUR Setting currency and exchange rate. √ Extracts the square root of a positive number displayed in the entry register. MODE Change mode between the calculator and the keypad status. SEND Send the calculation result to PC when the device is in calculator mode or in keypad mode. Fn Combination key with Tax– and Tax+ function. When you completed the setting of Tax rate, press the Fn key with Tax– or Tax+ key; the calculation result will be changed. Tax – Price-less-tax calculation. Tax + Price-plus-tax calculation. When Num Off, the input symbol will be “=”. Special Function: This new keypad has no synchronized problem; users can use the keypad and inputting characters from a notebook at the same time. Especially, it doesn’t need any drivers and fully support Plug & Play.
5 No matter the Host’s Num Lock function status, users can choose the Num Key or direction key on the keypad. When users press the keypad’s Num Lock key once, it can change the keypad’s Num Lock status. If press the Num Lock key until 0.8 sec, then the Host’s Num Lock status will be changed. This function is designed for some special software, like Excel. Users can know the Num Lock status on the screen and don’t need to care the keypad’s Num Lock status. It makes the method of operation easily. About the Display The display shows the number you input, calculation results, and various indicators showing the status of the calculator. -MINUS Negative value indicator MEMORY Independent memory indicator ERROR Error indicator ‘ 3-digit separator (apostrophe) CALC Indicate you are in calculator status KEYPAD Indicate you are in keypad status GT Grant total CUR Price-multiply-CUR calculation EURO Price-multiply -CURO calculation
6 Rounding Selector & Decimal Place Selector  Rounding Selector Specified the rounding system F Floating decimal point system, which displays the value without rounding. 0,2,4 Number of decimal places for the 5/4 setting of the Rounding Selector. A The “Add Mode” automatically adds a decimal point and two decimal places to all values, even if you don’t input a decimal point. This mode is very useful when performing calculations in dollars or other monetary systems that require two decimal places. Two decimal places are not added in this mode if you press the DEL key while inputting a value, or for any operation other than addition and subtraction. Setting EURO and CUR Function CUR and €：Press CUR or € key for 1~1.5 sec, the “CUR” or “Euro” indicator on the LCD will start flashing. Input your desire parameter then press CUR or € key again. The “CUR” or “Euro” indicator will disappear; it means the setting is accomplished. When LCD displays “0”, you can press the “CUR” and “Euro” to enable or disable the indicator on the LCD. When the numerals
7 display on the LCD. Press the “CUR” or “Euro” button, and then it will exchange to the currency or tax rate. For example：Supposing the CUR parameter is 34 and the Euro parameter is 105; the calculation result is 180. The “CUR” or “Euro” indicator display on the LCD: Press CUR key, then the calculate result will be 6120 (180*34). Press Euro key, then the calculation result will be 18900 (180*105). The “CUR” or “Euro” indicator didn’t display on the LCD: Press CUR key, then the calculate result will be 5.29 (180/34). Press Euro key, then the calculation result will be 1.17 (180/105). Setting Tax Function: Press “%” key for 1~1.5 sec, the “TAX” indicator on the LCD will start flashing. Input your desire parameter then press “%” key again. The “TAX” indicator will disappear; it means the setting is accomplished. For example：Supposing the Tax parameter is 10 and the calculation result is 180. Press Fn & Tax+ key, then the calculate result will be 198(180*(1+0.1)). Press Fn & Tax- key, then the calculate result will be 162 (180/(1+0.1))
8 Rechargeable and Extendable cable This addition cable can use for two ways. One is for rechargeable cable and the other is for extendable cable. For rechargeable: 1. Pull out the mini USB plug and the USB connector into two different directions as the graphic shows. And extend the cable to the desired length. 2. Plug the mini USB plug into the keypad and plug the USB connector to your Notebook. For extendable(Choose): 1. Pull out the mini USB plug and the USB connector into two different directions as the graphic shows. And extend the cable to the desired length. 2. Using the adapter to the Mini USB and plug the connector to your Notebook and receiver.
9 Battery Status Indicator (LED) There are ways to identify the battery status. LED flash when a key is been pressed - This indicate the battery is low on power. When the cable is connected to the wireless keypad to recharge the battery: LED flashs rapidly - This indicate the battery is recharging. LED light stays ON - This indicate the recharging process has completed.
10 Specification of WKP-300 Operation Force 60±15gm Weight 150gm Total Travel 2.2 mm Operation Frequency 27 MHz/ 1 communication channel/ 1.5M distance Battery type 1 * AAA Rechargeable battery Dimension: L×W×H 136×75×21.95mm Receiver Connector USB Working mode: 6mA max TX Suspend mode: <100 uA Working mode: 16mA max Power consumption RX Suspend mode: <500uA Switch Life 8 million cycles Keycaps type Low profile Agency Approvals FCC, CE
11 Troubleshooting When you turn on the keypad, if the keypad’s LCD shows abnormal or nothing, check your battery first. If the battery is working fine, try to find an acicular metal and plug into the reset hole (in the back of the keypad). Then the keypad will work normally. If the problem was still unsolved, please contact the technical support.
12 FEDERAL COMMUNICATIONS COMMISSION STATEMENT Notice 1 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. Notice 2 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Navigation menu