Oki Electric Technology AASK2NWBB Bluetooth keyboard User Manual

Oki Electric Technology(Kunshan) Co.,Ltd Bluetooth keyboard

User manual

Samsung Bluetooth Keyboard Samsung Bluetooth Keyboard Quick GuideQuick Guide
Keyboard HardwareKeyboard Hardware 1 2534
1) Bluetooth LEDIn Power On/Off, LED lights on , In Paring Mode LED blinks2) Caps Lock LEDCaps Lock key is pressed this LED toggledCaps Lock key is pressed, this LED toggled.3) FN keySome keys have blue prined key together. That Blue key is operated, FN key is pressed at the same timep4) Power buttonPower button have 2 kins of function.1. Power On/Off – Press Power button for 2 seconds2PiPP Bttf4 d2.Paring –Press Power Button for 4 seconds5) Battery CoverOpen – slide into left sideClose - slide inti right sideSlideSlideBattery-Cover
Paring flowParing flow1) Battery insertingRemove Battery Cover and then insert Two AAA batteries into the battery compartment.Make sure to properly orient the positive(+) and negativ(-) ends as a specified by the Marks in the battery compartment2) Power ONPress Power button for 2 seconds, and then see LED lights On. 3) Enter Pairing ModegPress Power button for 4 seconds, and then see LED blinks. Paring Mode durationTime is 2 mins, if Paring failed within 2 mins, try again to press Power button for 4 secs.
4) Connecting to DECK TOP PC1) Control pannel> hardware & sound2) Add Bluetooth Device1) Control pannel-> hardware & sound2) Add Bluetooth Device 3) Search Bluetooth Device 4) Select Samsung Keyboard and then Next
5) DECK TOP PC에 연결하기5) Input digits and then Type“Enter”6) Check samusng keyboad device adding5) Input digits and then Type Enter6) Check samusng keyboad device adding7) Check in Device list.
Frequency2402MHz ~ 2480 MHz◈FeatureqyTemperature -20℃ ~ +50℃Voltage DC 3V ( AAA * 2EA)PC interface Bluetooth V2.0 Working distancd 15m Max.Size 294 x 133 x 15.4 mm
•FCC (Federal Communications Commission)••This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. •This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. •However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouragdt t t tth i t f b fth f ll ied to try to correct the interference by one or more of the following measures:–Reorient or relocate the receiving antenna.–Increase the separation between the equipment and receiver.–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.–Consult the dealer or an experienced radio/TV technical for help.–Reorient or relocate the receiving antenna.–Increase the separation between the equipment and receiver.–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.–Consult the dealer or an experienced radio/TV technical for help.–•WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.•This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions:•1. This device may not cause harmful interference, and1. This device may not cause harmful interference, and•2. This device must accept ant interference received, including interference that may cause undesirable operation.•••CEHbOki El t i T h l (Kh)CLtddl thtth d li li ith thti lit•Hereby, Oki Electric Technology (Kunshan) Co., Ltd declares that these modelsare in compliance with the essential requirement and other relevant provisions of directive 1999/5/EC.

Navigation menu