Ohsung Electronics URCTRFGE1 Base Station User Manual EMISSION TEST REPORT

Ohsung Electronics Co., Ltd. Base Station EMISSION TEST REPORT

User Manual

Order Number : GETEC-C1-12-377 FCC Part 15 subpart C Test Report Number : GETEC-E3-12-138 Page 1 / 1 EUT Type: Base Station FCC ID.: OZ5URCTRFGE1 APPENDIX H : USER’S MANUAL
TRF-GE1 G ExtenderOwner’s Manual
TRF-GE1 G EXTENDER500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 Congratulations on your choice! TRF-GE1 G Extender Owner's Manual © 2012 Universal Remote Control,Inc.The information in this manual is copyright protected. No part of this manual may becopied or reproduced in any form without prior written consent from UniversalRemote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. URC - Control the Experience is a registered trademark of Universal Remote Control, Inc.All other brand or product names are trademarks or registered trademarks of theirrespective companies or organizations.
TRF-GE1 G EXTENDERCongratulations! 1Features and Benefits 1Parts Guide 1TRF-GE1 Panel Descriptions 2Pairing a TRF-GE1 and a TRG-100/200 4Specifications 5USA Limited Warranty Statement 6Federal Communication CommissionInterference Statement 8Declaration of Conformity 9
Page 1TRF-GE1 G EXTENDERCongratulations!Thank you for purchasing the Total Control TRF-GE1 G Extender forthe MRX-20 Advanced Network System Controller. The TRF-GE1 GExtender is used to extend the normal operational range (30-50feet) between the TRG-100/200 Umotion remote and the MRX-20Advanced Network System Controller. Features and BenefitslExtends communication, via the wired network, between aTRG-100/TRG-200, and the MRX-20 for on-screen motioncontrol Substitutes the internal antenna found in the MRX-20 with itsinternal antenna, creating a new origin point for RF communication.This allows the on-screen motion control for the MRX-20 towork virtually anywhere in the project using a TRG-100/200Umotion remote control.lCompact design for easy installation Easily and discretely install a TRF-GE1 G Extender. Maintain yourhome decor while controlling your Total Control MRX AdvancedNetwork System Controller.Parts GuideThe TRF-GE1 G Extender includes:1 - TRF-GE1 G Extender 1 - Owner’s Manual1 - AC Power Adapter 1 - Wall Mount and 4 Screws
TRF-GE1 Panel DescriptionsThe front, rear and bottom panel consists of: Power LED: When illuminated this light indicates the TRF-GE1 is ON.Status LED: The Status LED signifies when the TRF-GE1 is connected tothe network: lConnected: Illuminates green. lNot Connected: Remains OFF.Data LED: The Data LED flashes as the TRF-GE1 receives andtransmits data.DC 12V (1A): Plug in the included AC/DC adapter to power up theTRF-GE1.LAN: Communicate over the network to an MRX-20 using anEthernet cable. Reset: Pressing the Reset button, with a stylus or paper clip, refreshesthe TRF-GE1. Unplugging and re-plugging the power cable alsoresets the unit. Pressing and holding the Reset button for 10 seconds, factory defaultsthe TRF-GE1 and places the unit back to its original factory condition.Page 2TRF-GE1 G EXTENDERPOWERLED STATUSLEDDATALEDDC 12VLANReset Pairing
Page 3TRF-GE1 G EXTENDERPairing: Place the TRF-GE1 G in pairing mode by pressing andholding the Pairing button for three seconds. For pairing a TRG-100/200 with a TRF-GE1 G, refer to the section: Pairing a TRF-GE1G with a TRG-100/200.lEntering pairing mode: Successfully entering the pairingmode is confirmed by the following LED responses:Power LED: Turns ON.Status LED: Flashes orange ON and OFF.Data LED: Remains OFF.lConfirmation of pairing: A successful pairing between a TRF-GE1 and a TRG-100/200 is confirmed with the following LEDresponses:Power LED: Turns ON.Status LED: Flashes green ON and OFF three times.Data LED: Remains OFF.
TRF-GE1 G EXTENDERPairing a TRF-GE1 and a TRG-100/200 Before you can begin to use the TRF-GE1 G Extender with the TRG-100/200 Umotion remote, it is necessary to pair them. The TRF-GE1 G has a Pairing button on the bottom of the unit, thismakes pairing possible without the use of a PC. Entering Pairing mode:1. Use a stylus or paper clip to press and hold the Pairingbutton (on the bottom of the TRF-GE1 G) for threeseconds. 2. When in pairing mode, press and hold the Main and Selbuttons for three seconds on the TRG-100/200 remote. 3. Once paired, both the TRG-100/200’s Umotion buttonand the TRF-GE1 Status light will flash three times. Keep in mind, although multiple TRG-100/200’s can pair with oneTRF-GE1 G Extender it is recommended that only one* TRG-100/200control the on-screen menu. *Multiple Umotion remotes paired to a single TRF-GE1 may causethe unit to respond sluggishly. Roaming throughout your home with a TRG-100/200, is NOTrecommended since it can only be paired with one TRF-GE1 GExtender and work within its 30 – 50 feet range.Page 4
TRF-GE1 G EXTENDERSpecificationsMicroprocessor: ARM32-bit Cortex- M3(120MHz)Power Supply: 12V DC 1ARAM: 128Mbyte Mobile DDRRF Range(radio frequency): 50 to 100 feet, depending upon the environmentRF Freqency: 2.425~2.475 GHzNAND: 128MbyteFLASH: 768KbytesSRAM: 128 + 4 KbyteWeight: 3.058 ozSize: 3.74” X 2.7” X 1.1”Power: 12V DC 1APage 5
TRF-GE1 G EXTENDERUSA Limited Warranty StatementYour Universal Remote Control, when delivered to you in new condition,is warranted against defects in materials or workmanship as follows:UNIVERSAL REMOTE CONTROL, INC. warrants this product againstdefects in material or workmanship for a period of one (1) year and as setforth below. Universal Remote Control will, at its sole option, repair theproduct using new or comparable rebuilt parts, or exchange the productfor a comparable new or rebuilt product. In the event of a defect, theseare your exclusive remedies.This Limited Warranty covers only the hardware components packagedwith the Product. It does not cover technical assistance for hardware orsoftware usage and it does not cover any software products whether ornot contained in the Product; any such software is provided "AS IS" unlessexpressly provided for in any enclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freight prepaid, inits original packaging or packaging affording adequate protection toUniversal Remote Control at the address provided in the Owner's Manual.It is your responsibility to backup any macro programming, artwork,software or other materials that may have been programmed into yourunit. It is likely that such data, software, or other materials will be lostduring service and Universal Remote Control will not be responsible forany such damage or loss. Adated purchase receipt, Bill of Sale, InstallationContract or other verifiable Proof of Purchase is required. For productsupport and other important information visit Universal Remote Control'swebsite: http://www.UniversalRemote.com or call the Customer ServiceCenter (914) 835-4484. This Limited Warranty only covers product issues caused by defectsin material or workmanship during ordinary consumer use. It doesnot cover product issues caused by any other reason, including butnot limited to product issues due to commercial use, acts of God,third-party installation, misuse, limitations of technology, or modification ofor to any part of the Universal Remote Control product. This imitedWarranty does not cover Universal Remote Control products sold asUSED, AS IS, REFURBISHED, so-called “B STOCK” or consumables(such as batteries). This Limited Warranty is invalid if the factory-applied serial number has been altered or removed from theproduct. This Limited Warranty is valid only in the United States ofAmerica. This Limited Warranty specifically excludes products soldby unauthorized resellers.Page 6
LIMITATION OF REMEDIESUNIVERSALREMOTE CONTROLSHALLNOT BE LIABLE FOR ANYINCIDENTALOR CONSEQUENTIALDAMAGES FOR BREACH OFANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THISPRODUCT. IN NO EVENT SHALL UNIVERSAL REMOTE CONTROLBE LIABLE, WHETHER IN CONTRACT OR IN TORT(INCLUDINGNEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICEOF THE PRODUCT, ACCESSORY OR SOFTWARE,OR FOR ANYINDIRECT, INCIDENTAL, SPECIALOR CONSEQUENTIALDAMAGESOF ANYKIND, OR LOSS OF REVENUE OR PROFITS,LOSS OFBUSINESS, LOSS OF INFORMATION OR DATA, SOFTWAREORAPPLICATIONS OR OTHER FINANCIALLOSS ARISING OUT OF ORIN CONNECTION WITH THE ABILITY OR INABILITY TO USE THEPRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENTTHESE DAMAGES MAY BE DISCLAIMED BY LAW. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THEREIS NO OTHER WARRANTY EXPRESSED OR IMPLIED. UNIVERSALREMOTE CONTROL WILL NOT BE HELD RESPONSIBLE FORSTATEMENTS MADE BY OTHERS CONCERNING THEMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSEON THIS PRODUCT. Some states or jurisdictions do not allow theexclusion or limitation of incidental or consequential damages, orallow limitations on how long an implied warranty lasts, so the abovelimitations or exclusions may not apply to you. This Limited Warrantygives you specific legal rights and you may have other rights whichvary from state to state or jurisdiction to jurisdiction.REV020708 TRF-GE1 G EXTENDERPage 7
Page 8TRF-GE1 G EXTENDERFederal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits foraClass B digital device, pursuant to part 15 of the FCC Rules. These limitsaredesigned to provide reasonable protection against harmful interference inaresidential installation. This equipment generates, uses and can radiateradiofrequency energy and, if not installed and used in accordance with theinstructions,may cause harmful interference to radio communications.However, there isno guarantee that interference will not occur in a particularinstallation. If thisequipment does cause harmful interference to radio ortelevision reception,which can be determined by turning the equipment offand on, the user isencouraged to try to correct the interference by one moreof the followingmeasures:uReorient or relocate the receiving antenna.uIncrease the separation between the equipment and receiver.uConnect the equipment into an outlet on a circuit different from thatto which the receiver is connected.uConsult the dealer or an experienced radio/TV technician for help.Warning!Changes or modifications not expressly approved by the manufacturer couldvoid the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user's authority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subjectto the following two conditions: (1) this device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Any changes or modifications not expressly approved by the partyresponsible for compliance could void the authority to operateequipment.Federal Communication Commission (FCC) Radiation Exposure Statement The device and the antenna for this device must be installed to ensure a minimum separation distance of 20 cm more from a person's body. Other operating configurations should be avoided.
Page 9TRF-GE1 G EXTENDERDeclaration of ConformityCompany Name : OH SUNG ELECTRONICS CO., LTD.Company Address : #181 GONG DAN-DONG, GUMI, GYEONG BUK, REPUBLIC OF KOREAContact Information : Phone: +82-54-468-7281, Fax: +82-54-461-8368Brand Name : UNIVERSAL remote controlProduct Name : BASE STATIONModel Name : TRF-GE1 This product herewith complies with the requirements of EMC Directive (2004/108/EC) and R&TTE Directive(1995/5/EC) issued by the Commission of the European CommunityCompliance with these directives implies conformity to the following European Communityn EMC Directivel EN 55022 (2010)l EN 55024 (2010)l EN 61000-3-2 (2006) + A1 (2009) + A2 (2009)l EN 61000-3-3 (2008)n R&TTE Directivel EN 60950-1 (2006) + A11 (2009) + A1 (2010) + A12 (2011)l ETSI EN 301 489-1 V1.9.2 (2011), ETSI EN 301 489-17 V2.2.1 (2012)l ETSI EN 300 328 V1.7.1 (2006)List of test reports and/or certificate verified compliance with the standards aboveDate of issue : March 16, 2012Name and signature of authorized person :n EMC Directivel Report No.l Testing Laboratory : Gumi College EMC Centern R&TTE Directivel Certificate No.l Certificate Body : SIEMIC (No. 2200)Hak-Ki KimGeneral ManagerOH SUNG ELECTRONICS CO., LTD.● EN 50385 (2002)
Page 10NOTE
Page 11NOTE
Page 12NOTE
Page 13NOTE
Page 14NOTE
Page 15NOTE
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.comOCE-0132C Rev 01

Navigation menu