Ohsung Electronics URCTKP5500 Network Keypad User Manual EMISSION TEST REPORT

Ohsung Electronics Co., Ltd. Network Keypad EMISSION TEST REPORT

Users Manual

Order Number : GETEC-C1-15-469 FCC Part 15 Certification Test Report Number : GETEC-E3-15-038 Page 1 / 1 EUT Type: Network Keypad FCC ID.: OZ5URCTKP5500 APPENDIX G : USER’S MANUAL
Owner’s ManualTKP-5500 Network Keypad
TKP-5500 Installation Manual ©2011-2014 Universal Remote Control, Inc.The information in this Owner’s Manual is copyright protected. No part of thismanual may be copied or reproduced in any form without prior writtenconsent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPER-ATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE INTHIS MANUAL.The information in this Owner’s Manual may be subject to change withoutprior notice. Total Control is a registered trademark of Universal Remote Control,Inc. URC Control the Experience is a registered trademark of UniversalRemote Control, Inc. All other brand or product names are trademarks or registered trademarksof their respective companies or organizations.Universal Remote Control,Inc.500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OFCONTENTSCongratulations! 1Features and Benefits 2Parts List 2TKP-5500 Product Description 3Displaying the Settings Screen 4Adjusting Sleep Settings 4Button Light Settings 4Setting Date and Time 4Sound 5Adjusting Brightness 5System 5Network 5Factory Default 6Exit 6Frequently Asked Questions 7Specifications 7Limited Warranty Statement 8End User Agreement 10Federal Communication CommissionInterference Statement 11Regulatory Information to the user 12Declaration of Conformity 13
Page 1TKP-5500 NETWORK KEYPADCongratulations!You've purchased a unique synthesis of hardware and software engineering,the Total Control TKP-5500 Network Keypad. The TKP-5500 achieves amagnificent combination of power and flexibility by simplifying andautomating the operation of even the most complex systems. The TKP-5500 has the ability to control audio video components, energymanagement devices, multi-zone matrixes, PCs, iPods and whole houseURC Lighting. It communicates over the Local Area Network (LAN) to theMRX Advanced System Controller.An MRX Advanced System Controller is REQUIRED for the TKP-5500 tooperate. The combination of the TKP-5500 and MRX-10 create a robust andpowerful system to control the Total Control product line and your hometheatre equipment.
Page 2TKP-5500 NETWORK KEYPADFeatures and BenefitsTwo-Way Control Of DevicesWith the URC two-way database you can control (with feedback)all compatible brands of receivers, lighting systems, alarms and thermostats. Two-Way Control of Media on PSX-2 and SNP-1The high speed of the LAN enables the TKP-5500 to display lists ofartists, albums or songs and to display the cover art of the selectedalbum on the Now Playing screen of the remote control from thePSX-2 Personal Server or from the SNP-1 Streaming Network Player.Backlit Color LCD screenThe TKP-5500 has a programmable 5” color LCD screen and backlit"hard" buttons. When any button is pressed the color LCD screenwill turn on, and the "hard" buttons will illuminate.User Configurable Information Feeds for News, Sports, Stocks andWeatherThe well known URC modules for News, Sports, Weather and Stocksare all available, configured for the TKP-5500 screen. Of course these are all user configurable.No batteries to replace...Ever!The TKP-5500 is powered over the Ethernet cable it's connected to,so you never have to worry about replacing batteries. Parts ListThe TKP-5500 Network Keypad includes:1 - TKP-5500 In-Wall Network Keypad1 - Mounting Bracket1 - Warranty Card4 - Screws for mounting to a wall box
TKP-5500 Product DescriptionThe TKP-5500 consists of a 5” color touchscreen. Your whole house cus-tom installer can request custom buttons specific to your Total Controlsetup.Power: Turn ON the room where the TKP-5500 is located (or any otherroom if using the Rooms Menu)Lights: Press to control URC Lighting throughout your home.Main: Press to view the main screen and control the Total Control system.Vol+, Vol- and Mute: Easily adjust the volume settings for any zone.LAN port: This is connected by your whole house custom installer toyour home network via Ethernet cable to a PoE (Power overEthernet) switch. Page 3TKP-5500 NETWORK KEYPAD
Displaying the Settings ScreenYou can adjust the settings of the TKP-5500whenever you like by pressing and holdingboth the MAIN and MUTE buttons for five seconds. When you do, the screen will changeto the SETTINGS screen. If you do not pressany button on the SETTINGS screen within 1 minute, the TKP-5500 will time out and automatically return to normal operation. Adjusting Sleep SettingsConserve energy by configuring the keypad to fall asleep after a specifiedamount of time. Select a time from thedrop down list. Button Light SettingsConserve energy by opting to turn off the LED lighting behind the buttons.Setting Date and TimeYour TKP-5500 may have been programmed to display the date or time on the touch screen.If you need to, you can adjust the time displayedby changing the settings on this screen.TKP-5500 NETWORK KEYPADPage 4
Page 5TKP-5500 NETWORK KEYPADSoundYour TKP-5500 may have been programmed to make acknowledgement tones. This isoptional, and some professional installers may prefer to keep it silent. However, you can adjust the volume to any level you like by touching and dragging the volume control here.Adjusting BrightnessSimply touch and drag the brightnessslider to the desired level.SystemThe System Information screen displaysdata about your TKP-5500's operating system, memory etc.NetworkThe Network screen displays networkinformation about your TKP-5500 and the network it is connected to.
Page 6TKP-5500 NETWORK KEYPADFactory DefaultWARNING! Only use this button when instructed to by Technical Support. It resets the memory of the TKP-5500 to the factory condition. All your programmingwill be lost!ExitWhen you have finished adjusting Settings, simply tap the EXIT buttonto return to normal operation.
Page 7TKP-5500 NETWORK KEYPADFrequently Asked QuestionsHow do I update the firmware?Periodically there will be firmware updates for the TKP-5500. As theTKP-5500 is connected to your home network, your installer hasthe ability to update the firmware via Off-Site programming. How do I reset a TKP-5500?Remove the front cover of the TKP-5500. Use a pen or pointed objectdevice to depress the button and reset the unit. How do I erase a TKP-5500?Press and hold Main + Mute for 3 seconds then select the FactoryDefault button. SpecificationsMicroprocessor: 190MHz RISCMemory: 128MB FlashDevices: Supports up to 255 DevicesPages: Supports up to 255 Pages on each DeviceMacro Capability: Up to 255 steps Network: One 10/100 Ethernet port (PoE)LCD : 3.5 inch (320x240 )Weight: 9.84 ozSize: 5.75” x 4.7” x 1.8”Power : Standard PoE Injector or PoE Switch (Purchased separately)
Page 8TKP-5500 NETWORK KEYPADLimited Warranty Statement1. LIMITED WARRANTY AND DISCLAIMERSUniversal Remote Control, Inc. (“URC”) warrants that URC equipmentpurchased directly from URC or from an authorized URC dealer ordistributor shall be free from defects in material and workmanship undernormal usage for a period of one (1) year from the date of purchase of theproduct by the end-user, but no longer than thirty-six (36) months from thedate of shipment of the URC equipment by URC to an authorized URCdealer or distributor, except that with respect to Total Control® whole-house products, the warranty extends for two (2) years from the date ofpurchase by the end-user, but no longer than forty-eight (48) months fromthe date of shipment of the URC equipment by URC to an authorized URCdealer or distributor. This limited warranty is valid only in the United States of America. URC equipment purchased from other than an authorized URC dealer ordistributor is without warranty.URC warrants that the software will substantially conform in any materialrespect to its functional specifications at the time of delivery. URC SHALLNOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIALERRORS AND/OR OMISSIONS MADE IN THE URC DOCUMENTATION.URC DOES NOT WARRANT THAT THE URC SOFTWARE IS BUG-FREEOR ERROR FREE OR THAT THERE ARE NO ERRORS/BUGS IN THE URCSOFTWARE.URC warrants that at the time of purchase the URC equipment and theURC software complied with all applicable regulations and policies of theFederal Communications Commission ("FCC") regarding electromagneticinterference caused by electronic/computing devices and to the extent thatthe URC equipment and/or the URC software fails to so comply, URCshall, at its own expense, take all reasonable measures to promptly causesuch to comply.THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCEFOR HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLYPROVIDED FOR HEREIN. CERTAIN IMPLIED WARRANTIES, INCLUDING AN IMPLIED WARRANTYOF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,MAY BE AVAILABLE WITH RESPECT TO URC EQUIPMENT. IMPLIEDWARRANTIES VARY FROM STATE TO STATE. URC EXPRESSLY LIMITSTHESE IMPLIED WARRANTIES, TO THE EXTENT ALLOWABLE BY LAW,TO THE TIME PERIODS COVERED BY THE EXPRESS WRITTENWARRANTIES PROVIDED HEREIN. OTHERWISE AND EXCEPT AS PROVIDED FOR HEREIN, URC EXPRESSLY DISCLAIMS ALLWARRANTIES, EXPRESS, STATUTORY OR IMPLIED, AND MAKES NOREPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OFTHE USE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION INTERMS OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE.
Page 9TKP-5500 NETWORK KEYPADEXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICESARE SUPPLIED "AS IS", WITHOUT ANY WARRANTY, EXPRESS,STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENTPERMITTED BY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALLWARRANTIES RELATING TO TECHNICAL SERVICES, EXPRESS,STATUTORY OR IMPLIED, INCLUDING BUT NOT LIMITED TO THEWARRANTIES OF QUALITY OR REASONABLE SKILL AND CARE, OROUTCOME OR RESULTS.WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHERPROVISIONS HEREIN, THIS LIMITED WARRANTY DOES NOT COVER: (I)DAMAGE FROM MISUSE, NEGLECT OR ACTS OF NATURE, (II)MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT,OR (IV) BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TOFOLLOW URC WARRANTY CLAIM PROCEDURE.The warranty limitations and warranty disclaimers may not apply to enduser in whole or in part, where such are restricted or excluded byapplicable law, and such shall apply to the maximum extent permitted byapplicable law.In the event of any warranty claim, URC will, at its sole option, repair theURC equipment using new or comparable rebuilt parts, or exchange theURC equipment for new or rebuilt equipment. In the event of a defect,these are the end user's exclusive remedies.All the URC equipment returned for service, exchange or repair require anRGA number. To obtain an RGA number, you must complete a ReturnRequest Form which you may obtain by calling (914) 835-4484 orcontacting URC at returnrequest@universalremote.com. To obtain warrantyservice, end user must deliver the URC equipment, freight prepaid, in itsoriginal packaging or packaging affording adequate protection to URC at420 Columbus Avenue, Valhalla, NY 10595. It is end user's responsibilityto backup any macro programming, artwork, software or other materialsthat may have been programmed into the unit. It is likely that such data,software, or other materials will be lost during service and URC will not beresponsible for any such damage or loss. A dated purchase receipt, bill ofsale, installation contract or other verifiable proof of purchase is required.For the URC equipment support and other important information, pleasevisit URC's website available at www.universalremote.com or call theCustomer Service Center at (914) 835-4484.This limited warranty only covers the URC equipment issues caused bydefects in material or workmanship during ordinary consumer use. It doesnot cover product issues caused by any other reason, including but notlimited to product issues due to commercial use, acts of God, third-partyinstallation, misuse, limitations of technology, or modification of or to anypart of the URC equipment. This limited warranty does not cover the URCequipment sold as used, as is, refurbished, so called "B stock" orconsumables (such as batteries). This limited warranty is invalid if thefactory applied serial number has been altered or removed from the URCequipment. This limited warranty specifically excludes the URCequipment sold by unauthorized resellers.
Page 10TKP-5500 NETWORK KEYPADWith the exception of URC's IR-only, broad-based consumer remotes, noneof URC's PC programmable remotes or any of our Total Control® whole-house equipment are authorized for online internet sales. Buying URC's PCprogrammable remotes or any of our Total Control® whole-houseequipment online means buying equipment that does not have URC'slimited warranty. Such equipment is not eligible for URC tech support orsoftware support, either.2. URC'S LIMITATIONS OF LIABILITYIN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL,INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGESOF ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY,EVEN IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TODATA, COMPUTER SYSTEMS OR COMPUTER PROGRAMS.URC'S LIABILITY, IF ANY, FOR DIRECT DAMAGES OF ANY FORM SHALLBE LIMITED TO ACTUAL DAMAGES, NOT IN EXCESS OF AMOUNTSPAID BY END USER FOR THE URC EQUIPMENT.IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITSCONTROL, INCLUDING ANY INSTANCE OF FORCE MAJEURE.IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OFEND USER OR ANY THIRD PARTY.THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER INWHOLE OR IN PART, WHERE SUCH ARE RESTRICTED LIMITED OREXCLUDED BY APPLICABLE LAW AND SUCH SHALL APPLY TO THEMAXIMUM EXTENT PERMITTED BY APPLICABLE LAW.URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADEBY OTHERS.SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSIONOR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, ORALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TOEND USER. THIS LIMITED WARRANTY GIVES END USER SPECIFIC LEGALRIGHTS AND END USER MAY HAVE OTHER RIGHTS WHICH VARYFROM STATE TO STATE OR JURISDICTION TO JURISDICTION.End User AgreementThe terms and conditions of the End User Agreement available atwww.universalremote.com/eua.php shall apply.
Page 11TKP-5500 NETWORK KEYPADFederal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one more of the followingmeasures:uReorient or relocate the receiving antenna.uIncrease the separation between the equipment and receiver.uConnect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.uConsult the dealer or an experienced radio/TV technician forhelp.Warning!Changes or modifications not expressly approved by the manufacturer couldvoid the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user's authority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, including interferencethat may cause undesired operation.Any changes or modifications not expressly approved by the party responsiblefor compliance could void the authority to operate equipment.
Regulatory Information to the usernCE conformity NoticeProducts with “CE” marking comply EMC Directive 2004/108/EC issuedby the commission of the European Community.1) EMC DirectivelEmission : EN 55022lImmunity : EN 55024lPower : EN-61000-3-2, 3nDeclaration of Conformity“Hereby, Universal Remote Control Inc. declares that this TKP-5500 is incompliance with the Essential requirements and other relevant provisionsof EMC Directive 2004/108/EC.”CertificationType No.(Model No.) TKP-5500Batch/Serial No. -Power Rating 48.0V , 0.32APage 12TKP-5500 NETWORK KEYPAD
Page 13TKP-5500 NETWORK KEYPADDeclaration of ConformityCompany Name : Universal Remote Control Inc.Company Address : 500 Mamaroneck Avenue, Harrison, NY 10528, U.S.AContact Information : www.universalremote.comPhone: (914)835-4484 Fax: (914)835-4532Brand Name : UNIVERSAL remote controlProduct Name : Network KeypadModel Name : TKP-5500This product herewith complies with the requirements of EMC Directive (2004/108/EC)issued by the Commission of the European CommunityCompliance with these directives implies conformity to the following European CommunitynEMC DirectivelEN 55022lEN 55024lEN 61000-3-2lEN 61000-3-3List of test reports and/or certificate verified compliance with the standards aboveDate of issue : October 30, 2015Name and signature of authorized person :nEMC DirectivelReport No.lTesti ng Labora tory : Gumi College EMC CenterJames NovakSenior Product ManagerUniversal Remote Control Inc.
Page 14NOTE
Page 15NOTE
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.comTKP-5500 Draft 1_RH

Navigation menu