Ohsung Electronics URCMXHPH500 BASE STATION User Manual H User s Manual

Ohsung Electronics Co., Ltd. BASE STATION H User s Manual

User Manual

Order Number : GETEC-C1-17-117 FCC Part 15 subpart C Test Report Number : GETEC-E3-17-005 Page 1 / 1 EUT Type: BASE STATION FCC ID.: OZ5URCMXHPH500 APPENDIX H : USER’S MANUAL
MXHP-H500 (Hub)Owner’s Manual v.1.0
MX-HomePro MXHP-H500 Owner’s Manual© 2016 Universal Remote Control, Inc. all rights reserved.The information in this manual is copyright protected. No part of this manual may be reproducedin any form without written consent from Universal Remote Control.Universal Remote Control SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL, OR EDITORIALERRORS/OMISSIONS MADE IN THIS MANUAL.The information in this manual is subject to change without prior notice.URC - Control the Experience is a registered trademark of Universal Remote Control, Inc.All other brand or product names are trademarks or registered trademarks of their respectivecompanies or organizations.Important NoticesThe following sections contain information that is useful to the installer. It’s not necessary for youto learn or remember any of the details. However, we still recommend that you read them so thatyou are fully away of the functions and capabilities of your MX-HomePro system.
Introduction.................................................................................................................1Features and Benefits..................................................................................................1Parts List.......................................................................................................................1Before Getting Started................................................................................................2MXHP-H500 (Hub)......................................................................................................2MX-HomePro Mobile App (iOS/Android)................................................................3MXHP-R500 (Remote)................................................................................................4Rear Panel Descriptions..............................................................................................5Infrared Outputs....................................................................................................5Ethernet LAN Connection/Wi-Fi...........................................................................5Controlling Other Network Devices (IP Control)................................................5DC Power Input......................................................................................................5Front Panel Descriptions.............................................................................................6Top Panel DescriptionsPower LED...............................................................................................................6Status LED...............................................................................................................7Wi-Fi LED.................................................................................................................8Bottom Panel Description..........................................................................................9Reset Button...........................................................................................................9Factory Reset..........................................................................................................9MAC Address Stickers..........................................................................................10WPS Button..........................................................................................................10Remove able Mounting Plate.............................................................................10Network Installation.................................................................................................11Wired.....................................................................................................................11Wireless (Wi-Fi)....................................................................................................11Hub Programming....................................................................................................12Specifications.............................................................................................................12Limited Warranty......................................................................................................13End User Agreement.................................................................................................13Federal Communication Commission Interference Statement............................13FCC Caution................................................................................................................13Federal Communication (FCC) Radiation Exposure Statement............................13
Page 1IntroductionThe MXHP-H500 (hub) controls the audio/video components in the home by sending infrared (IR)or IP (Internet Protocol) commands over the network via a wired or Wi-Fi connection. In themajority of installations the hub functions with little or no interaction from the end user.This hub grants the user access to the MX-HomePro mobile app (Entertain) which works inconjunction with the hub to enable one-way control of the audio/video products and two-waycontrol of the connect smart devices in the home.Adding a handheld MXHP-R500 remote to the system provides the same performance as theEntertain mobile app. The MXHP-R500 is the perfect accessory companion for a television room orbedroom night table.It’s also possible to expand control to other rooms or areas of your home (refer to MX-HomeProInstallation Guide). Hubs can be installed in up to five rooms using the same local network forInternet access.Features and BenefitsMX-HomePro is designed to provide the user with the best possible resources for control of thehome. Enjoy key features such as:●Connect with Wi-Fir or Wired EthernetThe MXHP-H500 grants the smart home professional the flexibility to connect it to routervia a hard-wired Ethernet cable or via Wi-Fi.●Two-way meta-data feedbackExperience real-time two-way feedback right on a smart phone, tablet, or optional MXHP-R500 remote when using compatible smart home devices such as Z-Wave thermostats,lighting, or a selection of compatible IP cameras. Full two-way control of Sonos, Nest, andother compatible modules are also available (refer to Advance Device Integration Guide).●Included iOS and Android mobile appPurchase of the hub gives you unlimited free access to the Entertain app. This app can bedownloaded on to smart phones or tablets. It communicated through the local network toprovide one-way control of all audio/video devices and the same two-way meta-dataexperience as found on the MXHP-R500 remote.Parts ListIncluded in the MXHP-H500 box:❑MXHP-500 Hub❑iOS/Android Mobile App❑12V 1000mA Power Supply❑4x Mounting Screws❑Ethernet Network Cable❑4x Standard Infrared Emitters❑Wall Mounting Plate
Page 2Before Getting StartedPrior to installing an MX-HomePro system, there are a few things to remember:●MX-HomePro systems are designed for use on the home’s local network. The hub can beconnected to the home network through an Ethernet cable or wirelessly using Wi-Fi.●Adding a TRF-ZW Z-Wave gateway gives the MX-HomePro system access to control thehome’s Z-Wave devices such as locks, thermostats, lighting, cameras, and scenes.●Programing is performed via the web page MX-HomePro Editor portal. The smart homeprofessional must log into this web portal in order to program all applicable MX-HomeProdevices. Further enhancements may be added, for all inquiries please contract URCTechnical Support.The Hub (MXHP-H500)The hub is a network based product that require the use of a previously installed or custom localarea Wi-Fi network (LAN).Do not attempt to disassemble the hub, there are no user-serviceable parts inside. Use only the ACadapter provided by URC. Do not expose for extended periods or time to excessive heat, moisture,or direct sunlight. Clean only with a soft, dry cloth. Unauthorized relocation of this unit maynegatively affect the performance of the system.
Page 3MX-HomePro Mobile App (iOS & Android)The Entertain app comes free with the purchase of an MXHP-H500 hub; it is available for iOS andAndroid. This mobile app provides full control of the audio/video components in a system withoutthe need of a point and shoot infrared remote.The mobile app also provides advance control of applicable audio/video devices through theusage of IP commands. These commands communicate over the network to control network basedequipment.Through the usage of the Automate app, control of Z-Wave lights, thermostats, door locks, and IPcameras are accomplished.
Page 4MXHP-R500 Remote ControlUsing the MX-HomePro MXHP-R500 remote, soldseparately, with a hub allows for control of homeaccessories such as lighting, thermostats, andsecurity. It also controls all of the home’saudio/video devices.This is a Wi-Fi only based remote and does not useinfrared or RF to communicate to any devices. It isthe perfect accessory companion for the televisionroom or bedroom night table.
Page 5Rear Panel DescriptionBelow are the components that make up the rear of the MXHP-H500 hub:Infrared OutputsThe rear panel of the hub has four (4) infrared emitter ports, allowing for control of virtually anyaudio/video device.Self-adhesive flashers (included) affix to the front panels of the television, Blu-ray player and any other equipment that uses infrared.Ethernet LAN Connections/Wi-FiA standard Ethernet connection port is provided for a hard-wired connection to the local network via a Cat5 cable (included).The hub also supports wireless (Wi-Fi) connectivity to the same local networkControlling Other Network Devices (IP Control)The hub can control other IP controllable equipment (such as various AVRs) that are connected to the same network as the MX-HomePro system. One-way command of these devices can be performed via the Entertain app or the remote control.DC Power InputThe unit is powered by an AC power adapter that plugs into the input port shown below. Only use the AC adapter that is supplied with this unit.
Page 6Front Panel DescriptionThe front panel of the hub houses an infrared blaster, this is used to send out IR commands tocomponents that are in the same cabinet or in line-of-sight range.This blaster can be enabled or disabled via the MX-HomePro Editor web portal. The smart homeprofessional installer has the flexibility to use either the rear emitter ports or the front panelblaster. However, both cannot be used simultaneously.An additional feature of the front blaster is the ability to use it for learned commands. If a device isnot in the database, use the MX-HomePro Editor and the front blaster to learn commands fromthe original remote (see MX-HomePro Programming guide).Top Panel DescriptionThe top panel of the hub contains three (3) LED indicators that displays its status.Power LEDThis LED illuminates blue when the DC power is connected, as shown below.
Page 7 Status LED The Status LED has six (6) possible states.●Blue❑Steady: Indicates that the hub is connected to the MX-HomePro server and is fullyprogrammed to control the home.❑Blinking: Indicates that the hub is being programmed by the MX-HomePro server.●Red❑Steady: Indicates that the hub is connected to the MX-HomePro server, but has notbeen programmed.❑Blinking: Indicates that the hub cannot connect to the MX-HomePro server, pleasecheck the network connection/settings.●Green❑Steady: Indicates that the hub is operating in a secondary room within the system.❑Blinking: Indicates that the hub’s firmware is currently being updated.
Page 8 Wi-Fi LED The Wi-Fi LED has six (6) possible states.●Blue Indicates an excellent Wi-Fi signal.●Red❑Steady: Indicates that the hub is connected with a poor Wi-Fi signal strength❑Blinking: Indicates that there is an error when connecting to the wireless network.●Green Indicates that the hub is connected with a good Wi-Fi signal.●Yellow Indicates that the hub is connected with a fair Wi-Fi signal.●Off The LED is off when the hub is connected to the router via Ethernet.
Page 9Bottom Panel DescriptionThe following pages describe the components that make up the underside of the hub.Reset ButtonA single press of the Reset button REBOOTS the hub, this is similar to unplugging and reapplying the AC power source.DO THIS ONLY IF INSTRUCTED TO DO SO BY YOUR INSTALLER OR BY MX- HomePro TECHNICAL SUPPORTFactory ResetPressing and holding the Reset button for ten seconds results in setting the MXHP-H500 hub to a factory default state. Meaning all user data and programming are erased and the system requires re-programming.
Page 10MAC Address StickersTwo MAC address stickers are located at the bottom panel of the hub. Use this unique address to identify each hub on the system.WPS ButtonThis button provides an easy one button press connection on a WPS (Wi-Fi Protected Setup) ready network. This button is only to be used by the smart home professional.RemovableMounting PlateA removable mounting plate along with the four provided mounting screws can be used to mount the hub to a flat surface such as a ceiling, wall, or entertainment center.
Page 11Network InstallationThe hub can be installed using Wi-Fi or an Ethernet connection, keep in mind the initialprogramming must be performed with a wired connection.When being installed for the first time, one of the two following steps must be followed:Wired EthernetConnect the hub to the router using the supplied Ethernet cable. See image below for proper Ethernet placement.OR Wireless (Wi-Fi)1. Connect the hub to the wireless access point by using the WPS button (page 10) andpressing the same button on the wireless access point/router2. If successfully connected, the Wi-Fi LED glows blue, green, yellow, or red based on thesignal strength (page 8)Setup is now complete, if you wish to set specific network settings, see the following section.When the Status LED illuminates red, use the remote control or mobile app to set the networkproperties of the hub (see MX-HomePro Installation Guide). Make sure the remote control ormobile app are on the same network that the hub is hard wired into.To set the network properties of the hub, insert the battery into the remote control and followthe on-screen prompts (for more details refer to the MX-HomePro Installation Guide).
Page 12Hub ProgrammingEach MXHP-H500 requires professional programming for control of the equipment within thehome. Programming the hub is performed through the MX-HomePro Editor web portal. Access itthrough the following link:https://www.mxhomepro.comOnce the system has been programmed using the MX-HomePro Editor, a backup of the system fileis stored within the MX-HomePro server. This file can be accessed and edited at any time by asmart home professional installer.If a URC TRF-ZW gateway is added to the system, additional programming and user setup stepsmay be required (see Advanced Devices Integration Guide).SpecificationsIR Range (Line of Sight): 30-50 feet, dependant on environmentMacro Capability: Supports up to 255 steps per macroWi-Fi: IEEE 802.11 b/g/n (2.4Ghz)Size: 1.18”H x 4.63”W x 4.63”DWeight: 5.19ozPower 12V DC 1A
Page 13Limited Warranty StatementClick on the section title above to read the full terms and conditions of the Limited WarrantyStatement. Also available publicly on the URC home page.End User AgreementClick on the section title above to read the full terms and conditions of the End User Agreement.Also available publicly on the URC home page.Federal Communications CommissionInterference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one more of the followingmeasures:❑Reorient or relocate the receiving antenna❑Increase the separation between the equipment and receiver❑Connect the equipment into an outlet on a circuit different from that to which the receiveris connected❑Consult the dealer or an experienced radio/TV technician for helpWarning!Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC rules. Operation is subject to the following conditions:1. This device may not cause harmful interference2. This device must accept any interference received, including interference that may causeundesired operation. Any changes or modifications not expressly approved by the partyresponsible for compliance could void the authority to operate equipment. The antenna(s)used for this transmitter must not be co-located or operating in conjunction with any otherantenna or transmitter.Federal Communication Commission (FCC)Radiation Exposure StatementThis device is approved as a table-top device which is normally operated at 20cm from a person’sbody.

Navigation menu