Ohsung Electronics URCMX980 RF REMOTE CONTROLLER User Manual I

Ohsung Electronics Co., Ltd. RF REMOTE CONTROLLER I

Contents

USERS MANUAL 2

Main Settings MenuAdjusting the DisplayPage 8MX-980 OWNERS MANUALDISPLAY- Press this setting button toadjust the screen and button backlight-ing. The longer your screen is lit, themore frequently you’ll need to chargethe MX-980.SOUND - Adjust the volume of thesounds your MX-980 makes when youpress buttons.SYSTEM - These settings are for serviceuse. For diagnostic purposes, an installercan turn off the Pick Up sensor, displayremaining battery charge and erase allprogramming permanently. Some of thismenu may have been disabled by yourinstaller as a safety measure.INFORMATION - Adjust the time, dateor you can display the amount of mem-ory available and the version number ofthe firmware loaded into your MX-980.BACKLIGHT - Specify how long theMX-980 screen should stay lit after youpress a button. You can select two dif-ferent time out settings. One for when itis hand held, another for when it is inthe charging base.BRIGHT - Adjust the brightness of thescreen.BUTTON LIGHT - Turn the backlightingfor all buttons on or off. When on, allthe buttons backlight so that you canread their labels in total darkness.
System Settings MenuPage 9MX-980 OWNERS MANUALSound VolumePress this buttonto raise the vol-ume.Press this buttonto cancel anychanges you’vemade and returnto the MainSetting menu.Press this buttonto lower the vol-ume.Press this buttonto save anychanges you’vemade and returnto the MainSetting menu.POWER- Displays the current powerremaining and enables you to set thelevel that triggers a warning when youare using the MX-980.PICKUP - The MX-980 normally turnsitself on when its angle is changed. Thiscan be disabled for diagnostic purposes.FACTORY DEFAULT - WARNING!This setting is for service use. Yourinstaller can erase all programming per-manently, before downloading yourconfiguration back into the MX-980 viahis/her PC. This button may have beendisabled by your installer as a safetymeasure.
Setting TimeInformation MenuPage 10MX-980 OWNERS MANUALEach time youpress this buttonthe hour willchange. Each time youpress this buttonthe minute willchange. Press this buttonto cancel anychanges you’vemade and returnto the MainSetting menu.Press this buttonto change fromAM to PM.Press this buttonto save anychanges you’vemade and returnto the MainSetting menu.Press this buttonto turn daylightsavings time on.Press this buttonto turn daylightsavings time off.DATE- Press this button to set the date.TIME - Press this button to set the time.MEMORY - Press this button to displaythe amount of memory available.VERSION - Press this button to displaythe version of the MX-980 firmware.
Page 11MX-980 OWNERS MANUALUSA Limited Warranty StatementYour Universal Remote Control, when delivered to you in new condi-tion, is warranted against defects in materials or workmanship as fol-lows: UNIVERSAL REMOTE CONTROL, INC. warrants this productagainst defects in material or workmanship for a period of one (1) yearand as set forth below. Universal Remote Control will, at its soleoption, repair the product using new or comparable rebuilt parts, orexchange the product for a comparable new or rebuilt product. In theevent of a defect, these are your exclusive remedies.This Limited Warranty covers only the hardware components packaged withthe Product. It does not cover technical assistance for hardware or softwareusage and it does not cover any software products whether or not containedin the Product; any such software is provided "AS IS" unless expressly pro-vided for in any enclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freight prepaid, inits original packaging or packaging affording adequate protection toUniversal Remote Control at the address provided in the Owner's Manual. Itis your responsibility to backup any macro programming, artwork, softwareor other materials that may have been programmed into your unit. It is likelythat such data, software, or other materials will be lost during service andUniversal Remote Control will not be responsible for any such damage orloss. A dated purchase receipt, Bill of Sale, Installation Contract or other veri-fiable Proof of Purchase is required. For product support and other impor-tant information visit Universal Remote Control's website:http://www.UniversalRemote.comOr call the Universal Remote Control Customer Service Center (914) 835-4484. This Limited Warranty only covers product issues caused by defects in mate-rial or workmanship during ordinary consumer use. It does not cover prod-uct issues caused by any other reason, including but not limited to productissues due to commercial use, acts of God, third-party installation, misuse,limitations of technology, or modification of or to any part of the UniversalRemote Control product. This Limited Warranty does not cover UniversalRemote Control products sold as USED, AS IS, REFURBISHED, so-called "BSTOCK" or consumables (such as batteries). This Limited Warranty is invalidif the factory-applied serial number has been altered or removed from theproduct. This Limited Warranty is valid only in the United States of America.This Limited Warranty specifically excludes products sold by unauthorizedresellers.
Page 12MX-980 OWNERS MANUALSpecificationsMicroprocessor: ARM9 32bit 202MHzLCD - 2.4” TFT (QVGA) 262,144 Colors Memory - 64 Megabytes of SDRAM & 32 Megabytes of Nand Flash Devices - Supports up to 255 Devices with text, less with heavygraphics usagePages - Supports up to 255 Pages on each Device with text, lesswith heavy graphics usageLearning Capability - Standard frequencies (15kHz to 455kHz)Macro Capability - Up to 255 steps each, however nesting isallowed IR Range (Line of Sight via Infrared): 30-50 feet, depending on the envi-ronmentRF Range (radio frequency): 50 to 100 feet, depending upon the envi-ronmentRF Frequency: 418MHzBatteries: 1070mAh, 3.7 Volt Lithium Ion battery pack includedBattery Life: 120 minutes continuous use, 6000 minutes in standbymode.Weight: 7 oz. (with battery)Size: 2.4” x 9.2 x 1”
Page 13MX-980 OWNERS MANUALInformation To The UserThis equipment has been tested and found to comply with the lim-its for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may causeharmful interference to radio communications.However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try tocorrect the interference by one more of the following measures:WarningChanges or modifications not expressly approved by the manufac-turer could void the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TVinterference caused by unauthorized modifications to this equip-ment. Such modifications could void the user's authority to operate theequipment.Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician forhelp.
Page 14MEMO
Page 15MEMO
Page 16MEMO
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.comOCE-0036B Rev01

Navigation menu