Ohsung Electronics URCMX780I RF Remote Controller User Manual EMISSION TEST REPORT

Ohsung Electronics Co., Ltd. RF Remote Controller EMISSION TEST REPORT

Users Manual

Order Number : GETEC-C1-11-343 FCC Part 15 subpart C Test Report Number : GETEC-E3-11-153 Page 1 / 1 EUT Type: RF REMOTE CONTROLLER FCC ID.: OZ5URCMX780I APPENDIX H : USER’S MANUAL
MX-780i Owner’s Manual
MX-780i Owner’s Manual ©2011 URC, Inc.The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior writtenconsent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOROPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADEIN THIS MANUAL.The information in this manual may be subject to change without prior notice. Complete Control is a registered trademark of Universal Remote Control, Inc.Entertainment Made Simple is a trademark of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks oftheir respective companies or organizations.Universal Remote Control, Inc.500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OFCONTENTSCongratulations! 1Using the MX-780i 2Displaying the Settings Screen 3Color Screen 3Button Lighting 4System 5Erasing and Resetting 5Specifications 6Contact Us 6USA Limited Warranty Statement 7Federal Communication CommissionInterference Statement 9Regulatory Information to the user 10 Declaration of Conformity 11
Page 1MX-780i OWNER’SMANUALCongratulations!Thank you for purchasing the Complete Control MX-780i universalremote control. This unit can directly control every IR device inyour home. You can also control devices located in different roomsby integrating an MRF base station. Controlling your home is simplewith the MX-780i remote. Brilliant OLED color display with hard button interfaceWhen any button is pressed, the color OLED (Organic Light Emitting Diode) screen, as well as the remote buttons, light up. Once the screen is lit,each of the three buttons on either side of the screen are labeled.These button labels are based on the devices you want to watch or listen to. User interface customizable for any activityEach button is customizable for activities such as watching TV orlistening to the radio. These activities can contain multiple commands(macros) which enable a single button press to turn the neededdevices ON or OFF.Ultra-reliable narrow band RF - compatible with URC433.92 MHz RF Base StationsThe MX-780i can communicate directly to RF base stations, such asthe MRF-350i and the MRF-260i. It also natively communicates toURC Lighting via 433.92 MHz RF. This gives the MX-780i the ability tocontrol your system without being in direct line-of-sight. Fast setup of complex systems via Complete Control PC editorTo fully automate an audio/video system, and integrate two wayautomation of servers etc., the programmer must have a detailedknowledge of each component, LAN configuration, WiFioptimization and how the system is connected and operated. Onlya trained and certified professional audio/video installer can installan MX-780i remote control in a timely and efficient manner. Replacing the BatteriesUnlock the battery cover by pushing up on the spring lock at thebottom of the cover. Remove the cover. Observe the + and –polarity indicators inside the battery compartment and the batteries.Place the four AA batteries into their positions in the battery compartment.Now, replace the battery cover and snap it into place.
Page 2MX-780i OWNER’SMANUALUsing the MX-780i The MX-780i displays the title (Main or device) at the top of thescreen. Below the title, the OLED displays the device or commandnames. All of the hard buttons of the MX-780i are changed tocontrol the functions of the selected device.The Title displayswhat the main pageor device you cancontrol.Press either of thePage buttons to seeany other availablechoices. The Light buttonbacklights all of the buttons. The OLED buttonlabels describespecial featuresfor this activity. The Channel andPrevious Channelbuttons will changechannels when youhave selected deviceslike CABLE.The 4 way cursorbuttons enable youto navigate onscreen guides andmenus with ease.The Number keypadenters numbers forthe devices you’veselected. Whenwatching Cable TV,use the numberkeypad to enterchannel numbers.When listening to aCD, the numberkeypad enters tracknumbers.The Volume andMute buttons alwayscontrol the soundregardless of whatscreen is displayed.The Transport buttons(Play, Stop, Skip-, Skip+,FF, REW and Pause)operate when the selected device requiresthem. When watchingCable TV, use the numberkeypad to enter channelnumbers.When listening to a CD,the number keypadenters track numbers.
MX-780i OWNER’SMANUALDisplaying the Settings ScreenYou can adjust settings for the MX-780i whenever you like by pressing and holding the MAIN + ENTbutton for three seconds. When you do, the screen will change to the Settings menu. If you do not press any button on the Settings screen, the MX-780i returns to the previous Settings or Main screen after 30 seconds.There are two Settings screens. To access theother page, press either of the page buttons. Toselect a setting, press the button adjacent to thesetting you would like to adjust.To go back a step or to get out of the settingsscreen, press either the MAIN button or the EXITbutton on the MX-780i.Color ScreenColor screen settings provides two configurable options.1. Brightness: Adjust the screen brightness by pressing the screen buttonson the left and right side of the slider bar. Once the brightness has been adjusted, simply press the Save button. Pressing the Cancel button will revert to the remote’s last saved brightness setting.Note: High brightness settings will delete the batteries faster.2. Automatic Turn Off: Adjust the duration the OLED screen willremain illuminated after a button is pressed. Pressing the left andright screen buttons, next to the slider bar,changes how long the OLED screen stays on.Pressing the Less side decreases the time in steps down to a minimum time of 5 seconds.Pressing the More side increases the time in steps up to a maximum of 60 seconds. Once the setting has been adjusted, simply press the Save button. Pressing the Cancel button reverts the remote’s Automatic Turn Off setting to the last saved setting. Note: Increasing the Auto Turn off time will delete the batteries faster. Page 3
Page 4Button LightingThe Button Light settings page provides two configurable optionsfor how the MX-780i’s hard buttons should behave.1. Automatic ON: Adjusting this setting controls when the hardbutton backlight automatically turns on.a. Automatic Light Yes: Every time abutton is pressed the button backlight automatically turns on.b. Automatic Light No: The only wayto turn on the hard buttonbacklight is to press the dedicatedLights button, located on the rightside of the remote control.Once all changes have been made, pressthe Save button. Pressing the Cancelbutton reverts to the remote’s last savedsetting. Note: Selecting AutoLight Yes willdelete the batteries faster.2. Automatic Turn Off: You can adjust the amount of time the backlight remains on after a button is pressed. Press the left andright screen buttons next to the slider bar to change the duration. Pressing the Lessside decreases the time in steps down to a minimum of 5 seconds. Pressing the More side increases the time in steps up to a maximum of 60 seconds. Once the setting has been adjusted, simply press the Save button. Pressing the Cancel button reverts to the remote’s last saved Automatic Turn off setting.Note: Increasing the Auto Turn off time will delete the batteriesfaster. MX-780i OWNER’SMANUAL
Page 5MX-780i OWNER’SMANUALSystem The System Settings page provides two options.1. Power Remaining: This option shows you how much battery life is remaining. You can also adjust when the low battery warning screen appears by pressing the screen buttons to the left and right of the slider bar. Once the low battery percentage is reached, a notification screen appears reminding you the batteries will need to be replaced. Once the setting has been adjusted, simply press the Save button. Pressing the Cancel buttonreverts to the remote’s last saved Power Remaining setting. 3. System Info: The System Info screendisplays data about the MX-780i’s memoryusage and operating system version.Pressing the Next screen button takes youto the Operating System information, andpressing the Prev button takes you back tothe System Memory information. Erasing and ResettingWARNING! Only use this button when instructed by Technical Support.It resets the memory of the MX-780i to the factory default. All of your programming will be lost!To erase your MX-780i program, press the Erasebutton to return to factory default. Once selected a secondary screen will ask if you really want to erase the program.
MX-780i OWNER’SMANUALPage 6SpecificationsMicroprocessor: ARM7TDMIFLASH: 32Mbit Nor FLASHDisplay: 1.46” PMOLED (128 x 128)Total Customization Capability: Up to 48 devices and up to 8 pageseach for a total of 384 pages.Learning Capability: Standard frequencies (15kHz to 460kHz)Macro Capability: Up to 255 steps eachIR Range (Line of Sight via Infrared): 30-50 feet, depending on theenvironmentRF Range (radio frequency): 50 to 100 feet, depending upon theenvironmentRF Frequency: 433.92 MHzWeight: 8.5 oz. (with battery)Size: 8.7”H x 2.2”W x 1.3”DBatteries: Four AA Alkaline Batteries (included)Battery Life: 18 Hours of continuous button pressing with backlightingand LCD ON (months of use for most users).Users should expect some variation based on the brandof alkaline batteries used.Note: In actual use, the MX-780i protects itself if it gets stuckbetween couch cushions (with a button being continuouslypressed). After 30 seconds the MX-780i will turn off, and willnot turn on again until the button is released.Contact UsNeed assistance or have questions? Our Customer Service Support Center is here to help.Call (914) 835-4484 to speak with a customer servicerepresentative or email us at techsupport@universalremote.com500 Mamaroneck Avenue, Harrison, NY 10528Phone: (914) 835-4484 Fax: (914) 835-4532www.universalremote.com
Page 7USA Limited Warranty StatementYour Universal Remote Control, when delivered to you in new condition,is warranted against defects in materials or workmanship as follows:UNIVERSAL REMOTE CONTROL, INC. warrants this product againstdefects in material or workmanship for s period of one (1) year and as setforth below. Universal Remote Control will, at its sole option, repair theproduct using new or comparable rebuilt parts, or exchange the productfor a comparable new or rebuilt product. In the event of a defect, theseare your exclusive remedies.This Limited Warranty covers only the hardware components packagedwith the Product. It does not cover technical assistance for hardware orsoftware usage and it does not cover any software products whether ornot contained in the Product; any such software is provided "AS IS" unlessexpressly provided for in any enclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freight prepaid,in its original packaging or packaging affording adequate protection toUniversal Remote Control at the address provided in the Owner's Manual.It is your responsibility to backup any macro programming, artwork,software or other materials that may have been programmed into yourunit. It is likely that such data, software, or other materials will be lostduring service and Universal Remote Control will not be responsible forany such damage or loss. A dated purchase receipt, Bill of Sale, InstallationContract or other verifiable Proof of Purchase is required. For productsupport and other important information visit Universal Remote Control'swebsite: http://www.UniversalRemote.com or call the Customer ServiceCenter (914) 835-4484. This Limited Warranty only covers product issues caused by defectsin material or workmanship during ordinary consumer use. It doesnot cover product issues caused by any other reason, including butnot limited to product issues due to commercial use, acts of God, third-party installation, misuse, limitations of technology, or modification ofor to any part of the Universal Remote Control product. This LimitedWarranty does not cover Universal Remote Control products soldas USED, AS IS, REFURBISHED, so-called “B STOCK” or consumables(such as batteries). This Limited Warranty is invalid if the factory-appliedserial number has been altered or removed from the product. This LimitedWarranty is valid only in the United States of America. This LimitedWarranty specifically excludes products sold by unauthorized resellers.MX-780i OWNER’SMANUAL
MX-780i OWNER’SMANUALPage 8LIMITATION OF REMEDIESUNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANYINCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OFANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THISPRODUCT. IN NO EVENT SHALL UNIVERSAL REMOTE CONTROLBE LIABLE, WHETHER IN CONTRACT OR IN TORT (INCLUDINGNEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASEPRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FORANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIALDAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS,LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFT-WARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISINGOUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITYTO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THEFULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THEREIS NO OTHER WARRANTY EXPRESSED OR IMPLIED. UNIVERSALREMOTE CONTROL WILL NOT BE HELD RESPONSIBLE FOR STATE-MENTS MADE BY OTHERS CONCERNING THE MERCHANTABILITYOR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT.Some states or jurisdictions do not allow the exclusion or limitation ofincidental or consequential damages, or allow limitations on howlong an implied warranty lasts, so the above limitations or exclusionsmay not apply to you. This Limited Warranty gives you specific legalrights and you may have other rights which vary from state to state orjurisdiction to jurisdiction.REV020708
MX-780i OWNER’SMANUALPage 9Federal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, usesand can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouragedto try to correct the interference by one more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Warning!Changes or modifications not expressly approved by the manufacturercould void the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment.Such modifications could void the user's authority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the partyresponsible for compliance could void the authority to operate equipment.The antenna(s) used for this transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.Federal Communication Commission (FCC) Radiation Exposure StatementThe device and the antenna for this device must be installed to ensure aminimum separation distance of 20 cm more from a person’s body. Otheroperating configurations should be avoided.
Page 10MX-780i OWNER’SMANUALRegulatory Information to the userCE conformity NoticeProducts with “CE” marking comply with the R&TTE Directive1995/5/EC, EMC Directive 2004/108/EC and Low VoltageDirective 2006/95/EEC issued by the commission of the EuropeanCommunity.1) R&TTE DirectiveEMC : ETSI EN 301 489-1,3RF : ETSI EN 300 220-1,2: ETSI EN 300 2) EMC DirectiveEmission : EN 55022Immunity : EN 55024Power : EN-61000-3-2, 3Declaration of Conformity“Hereby, Universal Remote Control Inc. declares that this MX-780i isin compliance with the Essential requirements and other relevant pro-visions of Directive 1999/5/EC.”CertificationType No.(Model No.) MX-780iBatch/Serial No. -Power Rating 6.0V [AA BATTERY 4EA]Frequency band 433.92 MHz
Page 12NOTE
NOTEPage 13
NOTEPage 14
NOTEPage 15
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.comOCE-0066F Rev 01

Navigation menu