Ohsung Electronics URCMRX15 BASE STATION User Manual EMISSION TEST REPORT

Ohsung Electronics Co., Ltd. BASE STATION EMISSION TEST REPORT

User Manual

Order Number : GETEC-C1-18-132 FCC Part 15 Certification Test Report Number : GETEC-E3-18-004 Page 1 / 1 EUT Type: BASE STATION FCC ID.: OZ5URCMRX15 APPENDIX G : USER’S MANUAL
MRX-15Owner’s Manual
1Introduction:The MRX-15 Advanced Network System Controller controls is designed to meet theneeds of large residential or small commercial environments.Only Total Control 2.0 software, products, and user interfaces are supported by thispowerful device.Features and Benefits:●Stores and issues commands for all IP, IR, RS-232, Relays, Sensors, and12V Triggers controlled devices.●Provides two-way communication with Total Control 2.0 remotes and keypads.●Easy rack-mounting via the included rack mounting ears.Parts List:The MRX-15 Advanced Network Controller includes:●1x MRX-15 System Controller●1x AC Power Adapter●1x Power Cord●1x Adjustment Tool●1x Ethernet Cable●8x IR Emitters 3.5mm (standard)
2Front Panel Descriptions:The front panel consist of two (2) indicator lights that illuminate during usage:1. Power: Indicates that the MRX-15 is powered when illuminated.2. Ethernet: When the device has a valid Ethernet connection the indicator lightremains a solid blue.
Rear Panel Description:Below are the rear panel ports:1. Power: Attach the included power supply here.2. LAN: RJ45 10/100/1000 Ethernet port.3. IR Outputs: eight (8) standard 3.5mm IR emitter ports with individual outputlevel adjustment screws.4. Relays: two (2) programmable relays at NO, NC, or COM.5. 12V OUT: two (2) programmable outputs. Each may be programmed to turn on,off, or momentarily toggle.6. Sensors: four (4) sensor ports that allow the programming of state dependentand triggered macros. Compatible with all URC sensors.7. RS232: four (4) RS-232 ports. Supports TX, RX, and GND connections for wiredtwo-way communication.3
4Specifications:Microprocessor: I.MX6Dual 1.0GHzMemory: 8GB eMMC, 1GB RAMNetwork: One 10/100/1000M RJ45 Ethernet PortWeight: 73.83ozSize: 17.07” (W) x 8.3” (D) x 2.03” (H)Power: DC 12V/3.3ALimited Warranty Statement:1. Limited Warranty and DisclaimersUniversal Remote Control, Inc. (“URC”) warrants that the URC equipment shall befree from defects in material and workmanship under normal usage for one (1)year from purchase when such is purchased from URC. This limited warranty isvalid only in the United States of America. URC warrants that the softwarewill substantially conform in any material respect to its functional specifications atthe time of delivery. URC SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICALOR EDITORIAL ERRORS AND/OR OMISSIONS MADE IN THE URCDOCUMENTATION. URC DOES NOT WARRANT THAT THE URC SOFTWARE ISBUG-FREE OR ERROR FREE OR THAT THERE ARE NO ERRORS/BUGS IN THE URCSOFTWARE.URC warrants that at the time of purchase the URC equipment and the URCsoftware complied with all applicable regulations and policies of the FederalCommunications Commissions (“FCC”) regarding electromagnetic interferencecaused by electronic/computing devices and to the extent that the URC equipmentand/or the URC software fails to so comply, URC shall, at its own expense, take allreasonable measures to promptly cause such to comply.URC equipment purchases from other than an authorized URC dealer ordistributor are without warranty.THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCE FORHARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLY PROVIDED FORHEREIN, THE EQUIPMENT, SOFTWARE AND DOCUMENTATION OF URC ARESUPPLIED “AS IS” WITHOUT ANY WARRANTY, EXPRESS, STATUTORY ORIMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLELAW, URC EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OFMERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. URC DOES NOT
5WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THEUSE OF, OR THE RESULTS OF THE USE OF, THE EQUIPMENT, SOFTWARE ORDOCUMENTATION IN TERMS OF CORRECTNESS, ACCURACY, RELIABILITY OROTHERWISE. EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICALSERVICES ARE SUPPLIED “AS IS”, WITHOUT ANY WARRANTY, EXPRESS,STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTEDBY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS,STATUTORY OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIESOF QUALITY OR REASONABLE SKILL AND CARE, OR OUTCOME OR RESULTS.WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER PROVISIONSHEREIN, WARRANTY DOES NOT COVER: (I) DAMAGE FROM MISUSE, NEGLECTOR ACTS OR NATURE, (II) MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTYCONTENT (IV) BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO FOLLOWURC WARRANTY CLAIM PROCEDURE.The warranty limitations and warranty disclaimers may not apply to end user inwhole or in part, where such are restricted or excluded by applicable law and suchshall apply to the maximum extent permitted by applicable law.In the event of any warranty claim, URC will, at its sole option, repair the URCequipment using new or comparable rebuilt parts, or exchange the URC equipmentfor new or rebuilt equipment. In the event of a defect, these are the end user’sexclusive remedies.All the URC equipment returned for service, exchange or repair require an RGAnumber. To obtain an RGA number, you must complete a Return Request Formwhich you may obtain by calling (914) 835-4484 or contacting URC atreturnrequest@universalremote.com. To obtain warranty service, end user mustdeliver the URC equipment, freight prepaid, in its original packaging or packagingaffording adequate protection to URC at 420 Columbus Avenue, Valhalla, NY10595. It is end user’s responsibility to backup any macro programming, artwork,software or other materials that may have been programmed into the unit. It islikely that such data, software, or other materials will be lost during service andURC will not be responsible for any such damage or loss. A dated purchasereceipt, bill of sale, installation contract or other verifiable proof of purchase isrequired. For the URC equipment support and other important information, pleasevisit URC's website available at www.universalremote.com or call the CustomerService Center at (914) 835-4484.This limited warranty only covers the URC equipment issues caused by defects inmaterial or workmanship during ordinary consumer use. It does not cover productissues caused by any other reason, including but not limited to product issues dueto commercial use, acts of God, third-party installation, misuse, limitations oftechnology, or modification of or to any part of the URC equipment. This limitedwarranty does not cover the URC equipment sold as used, as is, refurbished, socalled "B stock" or consumables (such as batteries). This limited warranty is invalidif the factory applied serial number has been altered or removed from the URCequipment. This limited warranty specifically excludes the URC equipment sold byunauthorized resellers.With the exception of URC’s IR-only, broad-based consumer remotes, none of Page36 URC’s PC programmable remotes or any of our Total Control® whole-houseequipment are authorized for online internet sales. Buying URC’s PC programmableremotes or any of our Total Control® whole-house equipment online meansbuying equipment that does not have a URC’s limited warranty. Such equipment isnot eligible for URC tech support or software support, either.
62. URC’s Limitations of LiabilityIN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL,EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND OR LOSSOF PROFITS OR BUSINESS OPPORTUNITY, EVEN IF URC IS ADVISED OF THEPOSSIBILITY OF SUCH DAMAGES.IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TO DATA,COMPUTER SYSTEMS OR COMPUTER PROGRAMS. URC’S LIABILITY, IF ANY, FORDIRECT DAMAGES OF ANY FORM SHALL BE LIMITED TO ACTUAL DAMAGES,NOT IN EXCESS OF AMOUNTS PAID BY END USER FOR THE URC EQUIPMENT.IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITS CONTROL,INCLUDING ANY INSTANCE OF FORCE MAJEURE. IN NO EVENT SHALL URC BELIABLE FOR THE ACTS OR OMISSIONS OF END USER OR ANY THIRD PARTY.THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER IN WHOLE OR INPART, WHERE SUCH ARE RESTRICTED LIMITED OR EXCLUDED BY APPLICABLELAW AND SUCH SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BYAPPLICABLE LAW.URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE BYOTHERS.SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION ORLIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ALLOWLIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVELIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO END USER. THIS LIMITEDWARRANTY GIVES END USER SPECIFIC LEGAL RIGHTS AND END USER MAYHAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR JURISDICTION TOJURISDICTION.End User AgreementThe terms and conditions of the End User Agreement available atwww.universalremote.com/eua.php shall apply.Federal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one more of thefollowing measures:●Reorient or relocate the receiving antenna.●Increase the separation between the equipment and receiver.●Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.●Consult the dealer or an experienced radio/TV technician for help.
7Warning!Changes or modifications not expressly approved by the manufacturer could void theuser's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interference caused byunauthorized modifications to this equipment. Such modifications could void the user'sauthority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.Any changes or modifications not expressly approved by the party responsible forcompliance could void the authority to operate equipment.Regulatory Information to the User●CE conformity NoticeProducts with “CE” marking comply EMC Directive 2014/30/EU issued by thecommission of the European Community.1. EMC Directive●Emission●Immunity●Power●Declaration of Conformity“Hereby, Universal Remote Control Inc. declares that this MRX-15 is in compliancewith the Essential requirements”

Navigation menu