Ohsung Electronics URCML600 RF REMOTE CONTROLLER User Manual EMISSION TEST REPORT

Ohsung Electronics Co., Ltd. RF REMOTE CONTROLLER EMISSION TEST REPORT

USERS MANUAL

Test Report No.: GETEC-E3-06-062 FCC Part 15 Subpart B, C EUT Type: Remote Control APPENDIX I : USER’S MANUAL FCC ID: OZ5URCML600
Crestron ML-600Mini LCD RF Wireless Handheld RemoteOperations Guide
This document was prepared and written by the Technical Documentation department at:Crestron Electronics, Inc.15 Volvo DriveRockleigh, NJ 076471-888-CRESTRONAll brand names, product names and trademarks are the property of their respective owners.©2006 Crestron Electronics, Inc
iContentsMini LCD RF Handheld Remote: ML-600 1Introduction .............................................................................................1Features and Functions ...................................................................1Specifications................................................................................. 2Physical Description ...................................................................... 2Miscellaneous ........................................................................................ 8Using the Backlight ....................................................................... 8Installing/Changing the Batteries .................................................. 8Adjusting the Display Contrast...................................................... 9Cleaning the Screen ....................................................................... 9Problem Solving................................................................................... 10Troubleshooting........................................................................... 10Further Inquiries .......................................................................... 10Industry Compliance.................................................................... 11Crestron ML-600 Mini LCD RF Wireless Handheld RemoteOperations Guide - DOC. 6446 Contents •
1Mini LCD RF Handheld Remote:ML-600IntroductionCrestron ML-600 Mini LCD RF Wireless Handheld RemoteOperations Guide – DOC. 6446 Mini LCD RF Wireless Handheld Remote • Features and FunctionsThe Crestron®Mini LCD RF Handheld Remote (ML-600) is a universal remotecontrol that can be used to control a Crestron system. A liquid-crystal display (LCD)with switchable backlighting provides the user with a listing of available functionsand system commands. With a wireless range of up to 200 feet, the ML-600 can beused almost anywhere in a home or facility. The remote is powered by four AAAbatteries (included).Functional Summary• Easy-to-use preprogrammed functions for your Crestron system• 2.1” x 1.4” backlit, LCD screen for function selection• Ten preprogrammed soft keys which can be used to accesscustom command sequences, system functions, and preferences• Storage for 50 preprogrammed “favorite” functions and/or settings• Up to 200-foot RF wireless range allows system controlfrom almost anywhere in a building• Intuitive interface for easy operation• Five directional buttons for navigating on-screen menusfound on A/V devices• Transport controls for controlling a variety of audio andvideo sources• Volume and channel controls• Numeric keypad for entry of numeric data• Switchable backlighting for viewing display and buttons in a variety of lighting conditions
SPECIFICATION DETAILSBattery Power 6.0 VDC (Four AAA Alkaline batteries supplied)RF Output 418 MHzRF Range Up to 200 feet (depending on physicalstructures and electronic interference)Buttons (1) “ON” button(1) “OFF” button(10) “Soft” buttons(3) Menu navigation buttons (32) “Hard” buttons including a numerickeypad, transport controls, and directionalcontrols LCD Screen 2.10” x 1.40” (5.33 cm x 3.56 cm)Backlighting Switchable backlighting for buttons and LCD screen. Automatic shutoff after 15 seconds.Enclosure High impact, rubberized plastic enclosureOperating Temperature50º to 113º F (10º to 45º C),and Humidity 10 to 90% Relative Humidity (non-condensing)Dimensions and WeightHeight: 9.05 in (22.99 cm)(with batteries) Width: 3.07 in (7.80 cm)Depth: 1.40 in (3.56 cm)Weight: 0.5 lbs (0.23 kg)SpecificationsThe following table lists specifications for the ML-600. Specifications for the ML-600Physical DescriptionThe ML-600 (refer to the following illustrations) has a 2.10” x 1.40” (5.33 cm x 3.56cm) LCD screen. The LCD screen lists the options associated with the 10preprogrammed soft keys that flank the LCD screen. Three navigation keys are usedto switch between control screens on the remote control. There are 34 buttons thatare used for device-specific functions. A button on the right side of the remoteswitches the display/keypad backlighting on and off. For information on theoperation of the ML-600, refer to “Menu System” on page 5.2Mini LCD RF Wireless Handheld Remote Crestron ML-600• Mini LCD RF Wireless Handheld Remote Operations Guide – DOC. 6446
3ML-600, Front ViewCrestron ML-600 Mini LCD RF Wireless Handheld RemoteOperations Guide – DOC. 6446 Mini LCD RF Wireless Handheld Remote •
4Mini LCD RF Wireless Handheld Remote Crestron ML-600• Mini LCD RF Wireless Handheld Remote Operations Guide – DOC. 6446Physical Views of the ML-6009.05 in(22.99 cm)3.07 in(7.80 cm)1.40 in(3.56 cm)
Menu SystemThe ML-600 uses a menu to access all of the functions the remote is capable ofperforming. The menu has a MAIN section that can contain up to two pages. Thesemain pages can list up to 19 groups of options. Depending on your remote’sconfiguration, each option can be a selection of a room, device, or system function.Each group can contain up to four pages. Each page lists up to 10 additional options. There is also a “Favorites” section that can contain up to 50 favorite functions orsettings that are listed on five pages (up to 10 functions or settings per page). The following diagram illustrates the structure of ML-600’s menus.All of the available options are shown on the LCD screen and are selected with thesoft keys that flank the LCD. You can scroll through pages in the menu system byusing the navigation keys and operate devices in the system with the hard keys. Forinstructions on using the navigation keys, refer to “Navigation Keys” on page 6.LCD Display & Soft KeysThe LCD screen shows the current location within the menu system as well as theoptions that are assigned to each soft key. The top line of the screen indicates the name of the page or group while the bottomline shows the page number (if applicable). The illustration to the left shows a sampleMAIN page, which is indicated by the word “MAIN” on the top and bottom lines ofthe screen.NOTE: The MAIN section may contain up to two pages. Ten soft keys flank the sides of the LCD. A soft key differs from a hard key, as it doesnot have a fixed function. The assigned option of each soft key is shown on the LCDadjacent to a corresponding soft key. The options listed on the LCD change frompage to page. Pressing a soft key will carry out the assigned option.5Crestron ML-600 Mini LCD RF Wireless Handheld RemoteOperations Guide – DOC. 6446 Mini LCD RF Wireless Handheld Remote • FAVORITES PAGE 1FAVORITES PAGE 2FAVORITES PAGE 3FAVORITES PAGE 4FAVORITES PAGE 5FAVFAVFAVFAVFAVGROUPS9 GROUPS OF OPTIONS:EACH GROUP CAN CONTAINUP TO 40 OPTIONS123411 ...123419MAIN PAGEMAIN PAGE10 GROUPS OF OPTIONS:EACH GROUP CAN CONTAINUP TO 40 OPTIONSGROUPSFOUR PAGES OF OPTIONS(UP TO 10 OPTIONS/PAGE)12341...123410PAGEMAINTHTRGREATDINESTUDYDENM BEDMBATHBED 1BED 2POOLMAINSOFT KEYSML-600 Menu StructureDEPENDING ON YOUR SYSTEM CONFIGURATION, AN OPTION CAN BE A ROOM SELECTION,DEVICE SELECTION, OR COMMAND
6Mini LCD RF Wireless Handheld Remote Crestron ML-600• Mini LCD RF Wireless Handheld Remote Operations Guide – DOC. 6446Navigation KeysThe three navigation keys located under the LCD are used to view the different pagesin the menu system.PAGEAfter pressing a group’s soft key from a MAIN page, press the PAGE button to viewpages within the selected group. After reaching the final page in a group (either page2, 3, or 4), pressing PAGE once more returns the display to the first page in the group.Refer to the following illustration.The PAGE button can also be used to scroll through pages in the MAIN section.MAINPress MAIN at any time to return the LCD to the main page. If MAIN is pressedwhile viewing favorites, the display returns to the page that was displayed beforepressing FAV.FAVPress FAV to view up to five pages containing up to 50 of your favorite functionsand/or settings. Scroll forward through the list by pressing FAV. Pressing PAGE scrolls in reverseas shown in the following diagram.Navigating Through a Group Using the PAGE ButtonPAGE 1PAGE PAGE PAGEDVDTIVOAM/WXDRAPELIGHTHVACFMXMTHTRPAGE 2PAGETEMP+TEMP-HOLDBACKHUM+HUM-RUN PTHTRMAINTHTRGREATDINESTUDYDENM BEDMBATHBED 1BED 2POOLMAINPAGE 3FDIM+FDIM-RDIM+RDIM-BACKFULLPRE 1PRE 2PRE 3OFFTHTRPAGE 4OPEN CLOSETHTRSOFT KEY PRESSNOTE: The remote control is transmitting to the system when the indicator isdisplayed. The remote will not respond to a new button push while it is transmitting.
7Crestron ML-600 Mini LCD RF Wireless Handheld RemoteOperations Guide – DOC. 6446 Mini LCD RF Wireless Handheld Remote • Hard KeysThe hard keys are used to switch power to the devices in your system and controldevice-specific functions within the system.ON/OFFUse these buttons to switch power to the devices in your system. If the remote’sbatteries are running low, the bottom of the LCD display will flash “LOWBATTERY”, whenever the ON button is pressed. Refer to “Installing/Changing theBatteries” on page 8 for instructions on changing batteries.Device ControlThese hard keys consist of buttons for volume and channel control, accessing andusing on-screen menus, operating transport functions, a numeric keypad anddirectional control.The numeric keypad may be used to select a channel when controlling a television,while the transport controls may be used to control a VCR or DVD player. The directional control buttons can be used to navigate on-screen menus found onA/V devices as well as other functions. To select an on-screen option with thedirectional controls, press the SEL button.LIGHTLocated on the right side of the remote, the LIGHT button is used to turn thekey/display backlighting on and off. For more information on backlighting, refer to“Using the Backlight” on the following page.Programming PortLocated on the left side of the remote, the programming port is used by a Crestrondealer to program the ML-600 for use with a Crestron system. Do not connect anydevices to this port.Scrolling Through Favorites Using the FAV and PAGE ButtonsFAVORITES PAGE 1PAG E FAVFAVORITES PAGE 2PAG E FAVFAVORITES PAGE 3PAG E FAVFAVORITES PAGE 4PAG E FAVFAVORITES PAGE 5FAVPAG E
8Mini LCD RF Wireless Handheld Remote Crestron ML-600• Mini LCD RF Wireless Handheld Remote Operations Guide – DOC. 6446Using the BacklightIf it is difficult to see the display or buttons when viewing the remote, the ML-600backlight can be used to light up the display and buttons.Turn on the backlight by pressing the LIGHT button on the right side of the remotecontrol. The backlighting will stay on, and then automatically turn off afterapproximately 15 seconds. If you wish to turn off the backlighting without waiting,press the LIGHT button again.NOTE : Battery life is reduced with frequent use of the backlight feature.Installing/Changing the BatteriesIf the batteries are running low, the bottom of the LCD display will flash “LOWBATTERY” whenever the ON button is pressed. Low batteries may shorten theoperating range of the ML-600. To change the batteries, perform the following:1. While viewing the back of the ML-600, press the latch on the batterycover (shown in the following illustration) and remove it.2. Remove old batteries (if installed) and insert new batteries with theindicated polarity inside the battery compartment. The remote will run adiagnostic test.NOTE : Replace all of the batteries at the same time. Do not mix old and newbatteries.NOTE : The ML-600 will retain its program even when the batteries are removedfor an extended period.3. Replace the battery cover.MiscellaneousBattery Cover Removal
9Crestron ML-600 Mini LCD RF Wireless Handheld RemoteOperations Guide – DOC. 6446 Mini LCD RF Wireless Handheld Remote • Adjusting the Display ContrastThe LCD display’s contrast can be adjusted for optimal viewing.To make the display darker, press the UP button while holding the MAIN button.Refer to the following diagram.To make the display lighter, press the DOWN button while holding the MAINbutton.Cleaning the ScreenWARNING: Do not use abrasives or liquid cleaning solutions. Doing so canscratch the LCD or damage internal electrical components.Use a dry, soft, lint-free cloth to clean the screen. Be careful not to use excessiveforce. The screen is made of glass and is easily breakable.Adjusting Display Contrast
10Mini LCD RF Wireless Handheld Remote Crestron ML-600• Mini LCD RF Wireless Handheld Remote Operations Guide – DOC. 6446Further InquiriesIf after reviewing this Operations Guide for the ML-600, you cannot locate specificinformation or have questions, please contact your local Crestron dealer.TroubleshootingThe table below provides corrective action for possible trouble situations. If furtherassistance is required, please contact the Crestron dealer that programmed yoursystem. ML-600 TroubleshootingProblem SolvingTROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTIONDisplay is too dark. Contrast is set wrong. Adjust contrast setting.Display is too light. Contrast is set wrong. Adjust contrast setting.Batteries are running Replace batteries.low.System does not Devices are not Check power to devices.respond to commands powered up. Check that devices arefrom the ML-600. on.Batteries are running Replace batteries.low.RF Gateway not Check power to RFfunctioning. Gateway.
11Crestron ML-600 Mini LCD RF Wireless Handheld RemoteOperations Guide – DOC. 6446 Mini LCD RF Wireless Handheld Remote • Industry ComplianceAs of the date of manufacture, this unit has been tested and found to comply withspecifications for CE marking.NOTE : This device complies with part 15 of the FCC rules. Operation is subject tothe following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that maycause undesired operation.NOTE : This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residentialinstallation. The equipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and transceiver.• Connect the equipment into an outlet on a circuit different from that to which thetransceiver is connected.• Consult the dealer or an experienced radio/TV technician for help.
Crestron Electronics, Inc. Operations Guide – DOC. 644615 Volvo Drive Rockleigh, NJ 07647 (2014165)Tel: 888.CRESTRON 02.06 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.OCE-0016M REV 01
Information To The UserThis equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to part 15 of the FCCRules. These limits are designed to provide reasonable protec-tion against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communi-cations.However, there is no guarantee that interference will not occurin a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can bedetermined by turning the equipment off and on, the user isencouraged to try to correct the interference by one more of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment andreceiver.Connect the equipment into an outlet on a circuit differ-ent from that to which the receiver is connected.Consult the dealer or an experienced radio/TV techni-cian for help.WarningChanges or modifications not expressly approved by the manufac-turer could void the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TVinterference caused by unauthorized modifications to this equip-ment. Such modifications could void the user's authority to oper-ate the equipment.Universal Remote Control, Inc.500 Mamaroneck Avenue, Harrison, NY 10528Phone: (914) 835-4484 Fax: (914) 835-4532Universal Remote Control®

Navigation menu