OKIN Refined Electric Technology RF3011 Remote Control User Manual

OKIN Refined Electric Technology Co., Ltd. Remote Control Users Manual

Users Manual

Issue Department：Bedding Division Date： 2017-8-15System Instruction Author： Instruction of RF3011 Edition： 1.1 Page 1 of 5 1/5Instruction of RF3011 Figure1buttonofremote
Issue Department：Bedding Division Date： 2017-8-15System Instruction Author： Instruction of RF3011 Edition： 1.1 Page 2 of 5 2/51. Item1.1 ZG button（button 1 in figure 1） Click the ZG button, the actuator moves to ZG position, stop when click any button during the movement; Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records current position as ZG position; When in the process of moving to memory positions, the head and foot actuators move first, then the tilt and lumbar actuators move; 1.2 AntiSnore button（button 3 in figure 1） Click AntiSnore button, actuators move to AntiSnore position, stop when click any button during movement； Press and hold AntiSnore button for 5s, timer LED of remote flashes, the control box records current position as AntiSnore position; When in the process of moving to memory positions, the head and foot actuators move first, then the tilt and lumbar actuators move; 1.3 TV/PC button（button 4 in figure 1） Click TV/PC button, actuators move to TV/PC position, stop when click any button during movement； Press and hold TV/PC button for 5s, timer LED of remote flashes, the control box records current position as TV/PC position; When in the process of moving to memory positions, the head and foot actuators move first, then the tilt and lumbar actuators move; 1.4 Childlock button（button 5 in figure 1） In unlocked state, press and hold the childlock button, the red backlight of children lock button begins to flash, after 5s, the red backlight stops flashing, remote entersl into locked state; Under locked state, press any button except childlock button, the red backlight of childlock turns on, the button you pressed is invalid;
Issue Department：Bedding Division Date： 2017-8-15System Instruction Author： Instruction of RF3011 Edition： 1.1 Page 3 of 5 3/5Under locked state, press and hold childlock button, red backlight of childrenlock begins to flash,after 5s, the red backlight stops flashing, remote enters into the normal working condition; 1.5 LOUNGE button（button 6 in figure 1） Click LOUNGE button, actuators move to LOUNGE position, stop when click any button during movement； Press and hold LOUNGE button for 5s, timer LED of remote flashes, the control box records current position as LOUNGE position; When in the process of moving to memory positions, the head and foot actuators move first, then the tilt and lumbar actuators move; 1.6 Reset all memory positions to default settings（button 1 and 11 in figure 1） Pressa and hold ZG+FLAT buttons（button 1 and 16 in figure 2）for 5s, timer LED of remote flashes, the control box reset all memory positions to default settings； 1.7 Head up（button 7 in figure 1） Press and hold HEAD UP button of remote, head actuator moves out, stop when released； 1.8 Head down（button 10 in figure 1） Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released； 1.9 Foot up（button 8 in figure 1） Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released; 1.10 foot down（button 9 in figure 1） Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released；
Issue Department：Bedding Division Date： 2017-8-15System Instruction Author： Instruction of RF3011 Edition： 1.1 Page 4 of 5 4/5When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head and foot actuators start moving; 1.11 Flat（button 11 in figure 1） Click FLAT button, the bed goes flat, stop when click any button during the process of going flat； FCC Waring： Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ISED RSS Warning: This device complies with Innovation,Science and Economic Development Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
234111561Power Cord AC Power SupplyR5.504.01.250JLDP.10.023.000Power Cord ACRemote model (RF3011)Power Supply (JLDP.10.023.000)SYNC.MotorControl BoxCB.11.20.01Pair&Power Cord DCPair&Power Cord DCSynchronization Cable12Control BoxHead FootR5.217.01.01371Motor/(Head&Foot) Remote modelRF3011Page 5 of 5 CB.11.20.01

Navigation menu