OKIN Refined Electric Technology RF27 Remote Control User Manual Instruction of RF2719 V0

OKIN Refined Electric Technology Co., Ltd. Remote Control Instruction of RF2719 V0

User Manual

Issue Department：Date： 2019.01.07System Instruction Author： Instruction of RF27 Edition： V0.0 Page 1 of 5 1/5Instruction of RF271 Key description 1.1 appearanceFigure1buttonofremote
Issue Department：Date： 2019.01.07System Instruction Author： Instruction of RF27 Edition： V0.0 Page 2 of 5 2/52 Key description Buttons &LEDs Key value Specification B1：CHILD LOCK Press and hold child lock button till the backlight flashes remote enters locking or unlocking mode. B2：PAIR press and hold pair button ,the remote enters pairing mode
Issue Department：Date： 2019.01.07System Instruction Author： Instruction of RF27 Edition： V0.0 Page 3 of 5 3/5B3：M Click M button, the bed moves to M position, press and hold M button for 5s, until backlight flashes, the control set the current position as M position B4： FLASH LIGHT Click FLASH LIGHT button, open or close flash light B5：ZGClick zeroG button, the bed moves to zeroG position, press and hold zeroG button for 5s, until backlight flashes, the control set the current position as zeroG position B6：HEAD UP Press and hold head up button, head actuator moves out, stop when released B7：TV/PCClick TV/PC button, the bed moves to TV/PC position, press and hold TV/PC button for 5s, until backlight flashes, the control set the current position as TV/PC position B8：FOOT UP Press and hold foot up button, foot actuator moves out, stop when released B9： FLAT Press and hold flat button, the bed goes flat B10： FOOTDOWN Press and hold foot down button,foot actuator moves out, stop when released B11： ANTI SNORE Click antisnore button, the bed moves to antisnore position, press and hold antisnore button for 5s until backlight flashes, the control set the current position as antisnore position B12： HEAD DOWN Press and hold head down button, head actuator moves out, stop when released B13：LOUNGEClick lounge button, the bed moves to lounge position, press and hold lounge button for 5s, until backlight flashes, the control set the current position as lounge position B14： MASSAGE HEAD Click massage head button to switch massage intensity of head massage motors B15： TIMER Click timer button to switch massage time B16： MASSAGE FOOT Click massage foot button to switch massage
Issue Department：Date： 2019.01.07System Instruction Author： Instruction of RF27 Edition： V0.0 Page 4 of 5 4/5intensity of foot massage motors B17： MASSAGE ON/OFF Click massage on/off button to turn on/off head & foot massage motors B18： UNDER BED LIGHT Click under bed light button to turn on/off the under bed light B19： MASSAGE TYPE Click massage type button to switch massage modeLED 1： LED 1 Massage time: 10 minutes LED 2： LED 2 Massage time: 20 minutes LED 3： LED 3 Massage time: 30 minutes Other function 1: Zero G + Flat Press and hold zeroG and flat button for 5s until backlight flashes, the memory positions of control box reset to default settings FCC Warning： Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Issue Department：Date： 2019.01.07System Instruction Author： Instruction of RF27 Edition： V0.0 Page 5 of 5 5/5ISED RSS Warning: This device complies with Innovation,Science and Economic Development Canada licenceexemptRSS standard(s). Operation is subject to the following two conditions: (1) this devicemay not cause interference, and (2) this device must accept any interference, includinginterference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,même si le brouillage est susceptible d'en compromettre le fonctionnement. ISED RF exposure statement:This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.The device has been evaluated to meet general RF exposure requirement.Le matériel est conforme aux limites de dose d'exposition aux rayonnements énoncés pour fac un autre environnement.ce dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf.
B.15227 B.15226 CB.13.22.01 R5.113.00.011 R5.504.01.250 JLDP.10.023.000 JLDP.14.027.000 JLDP.05.032.000 R5.216.01.015CR5.413.01.005 R5.217.01.016JLDQ.9.001.130CR5.410.01.009NO. Product name Product code number1 Head Motor B.15227 12Foot Motor B.15226 13Massage Motor JLDQ.9.001.130C 24 Massage Motor Cable R5.410.01.009 15Control Box CB.13.22.01 16Power Supply JLDP.10.023.000 17Power Cord R5.217.01.016 18 ANSI power cord R5.504.01.250 19Y cable R5.216.01.015C 110 Patch cord of LED strip R5.413.01.005 111 LED strip/ LED R5.113.00.011 112 USB Socket/USB JLDP.05.032.000 113 Double USB Chager JLDP.14.027.000 214 19Keys remote RF27 1FCC ID: PCU-RF27IC: 21319-RF27FCC ID: PCU-CB1322IC: 21319-CB1322

Navigation menu