Nyce Sensors Z30111 Garage Door Sensor User Manual Manual

Nyce Sensors Inc. Garage Door Sensor Manual

Contents

Manual

How to Install a NYCE Control Garage Door Sensor STEP 1: INSTALL BATTERY STEP 2: INSTALL DRIVER + IDENTIFY STEP 3: PROPER LOCATION / ORIENTATION OF SENSOR  Mount the Garage Door Sensor on a horizontal pane of the garage door. The Sensor should be mounted on the bottom pane (fully closed) or top pane (fully open), depending on the desired operation.  A pair of sensors can be used on both bottom and top panes for full garage door reporting, if desired.  Ensure that the Garage Door Sensor is oriented with the bar symbol vertically, parallel to the edge of the garage door, as shown in the diagram below on the left. Install the Sensor’s driver:  GarageSensor_zb_nyce_3014.c4i  Download driver from: www.nycecontrol.com/support or from Control4’s online database  Copy to My Documents\Control4\Drivers  Open Composer and add the device to the project (Manufacturer = “Nyce Control”)  Identify the Sensor by pressing the button 4 times while its identify window is open.  The Sensor’s 64-bit address should appear in the identify window’s text box.  Add a Generic Garage Door Driver to the project “My Drivers\Sensors\Garage Door (Sensor)” and bind the two drivers together in Connections -> Control/AV CORRECT ORIENTATION INCORRECT ALIGNMENT Slide open the Garage Door Sensor’s housing. Install the CR2032 battery in the top part as shown below. Garage Door Sensor Button Right edge of Garage Door Right edge of Garage Door
Please visit our website if you have any installation questions www.nycecontrol.com/support STEP 4: TEST THE SENSOR STEP 5: INSTALL THE GARAGE DOOR SENSOR STEP 6: CLOSE COVER OPTION 1: DOUBLE-SIDED TAPE OPTION 2: #2 SCREWS  Test the Sensor from the desired location before permanently installing it by flipping it forward as shown above, this is the same action as the garage door opening.  Check that the icon in Navigator’s or Composer’s List View updates with a “Closed” and “Open” icon.   Using the methods shown above, install the Garage Door Sensor bottom housing on a clean surface using the double-sided tape or the two #2 screws provided. Notes:  Installation on metal surfaces can reduce transmission range.  Ensure that the device is installed in a dry location away from water, moisture and rain.  Once you have installed the bottom housing and confirmed the Sensor is properly communicating, close the Sensor housing as shown in the diagram above. PRODUCT FUNCTION + LED INDICATORS Button Press LED w/Press Action LED Action Description 2 Times  Network Status   Not Joined Joined 4 Times  Network Join   Join Successful Join Unsuccessful 6 Times  Network Leave  Leave Successful 10 Times   Restore Defaults   Leave (if joined) and Defaults Restored No Action    Unsupported Command Network Error, retry Device Busy Button LED

Navigation menu