Nokia Solutions and Networks USBW25200 WiMAX USB Dongle User Manual P1 USBw 100 Regulatory ai

Nokia Solutions and Networks WiMAX USB Dongle P1 USBw 100 Regulatory ai

User manual

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office.All other product or service names are the property of their respective owners.© 2009 Motorola, Inc.SeriesUSBw 200
72USBw 200NOV 2009USBw 200 NOV 2009Important Safety and Legal InformationImportant Safety and Legal InformationMOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners.© 2009 Motorola, Inc.TrademarksHigh Risk MaterialsComponents, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT designed, manufactured, or intended for use as online control equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (High Risk Activities). Motorola and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This FCC Regulatory Information (USBw 25200) 2.5 GHz Band••This section of your user manual provides important information about two different Motorola products. To determine which product you have, please review the label on the bottom of the product.USBw 25200The Motorola WiMAX USBw 25200 (Universal Serial Bus Device) is designed and tested to comply withthe following standards and guidelineson human exposure to RF electromagnetic energy: United States Federal Communications Commission, Code of Federal Regulations; 47CFR Part 2 sub-Part J, the American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95 1-2005, and the International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998. The WiMAX USBw 25200is compliant with the applicable worldwide RF energy standards in countries throughout the world, including the U.S. and countries in Europe, Asia and Latin America.USBw 35200The Motorola WiMAX USBw 35200 (Universal Serial Bus Device) is designed and tested to comply withthe International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 guidelines regarding human exposure to RF electromagnetic energy. It is compliant with theICNIRP RF energyguidelines which apply in all countries in Europe and in most countries inAsia and Latin America. The WiMAX USBw 35200 is not intended nor approved for use in the United States or Canada.To ensure compliance with the applicable RF energy exposure requirements, always adhere to the following operational instructions when using either the USBw 25200 device or the USBw 35200 device:These USB transmitters should be operated at a minimum separation distance of 5 mm (approximately one-quarter inch) from your body or other persons.When using swivel connectors, these USB devices should be operated in either a horizontal or vertical (upward)orientation to ensure optimum performance as well as compliance. Do not orient the device vertically downwards.For additional information on exposure requirements and wireless information and your health, visit http://www.motorola.com/rfhealth.RF Exposure Compliance and Guidelines Operating InstructionsImportant Product Safety andRegulatory Compliance Information
36USBw 200NOV 2009USBw 200 NOV 2009Important Safety and Legal InformationImportant Safety and Legal InformationEU Declaration of Conformity••••equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.This USB transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.License AgreementsThe software described in this document is the property of Motorola, Inc and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement.Copyrighted MaterialsSoftware and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Motorola, Inc.Usage and Disclosure RestrictionsThis instruction manual, and the Motorola products described in this instruction manual may be, include or describe copyrighted Motorola material, such as computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Motorola and its licensors contained herein or in the Motorola products described in this instruction manual may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, as arises by operation of law in the sale of a product.CopyrightsWhile reasonable efforts have been made to assure the accuracy of this document, Motorola, Inc. assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies or omissions. Motorola, Inc. reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Motorola, Inc. does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others.It is possible that this publication may contain references to, or information about Motorola products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Motorola intends to announce such Motorola products, programming, or services in your country.NoticeCopyrights and TrademarksTable 7-1 For the following equipment:Motorola WiMAX 3.5 GHz Adapter (Model Name: USBw 35200) is herewith confirmed to comply with the requirements set out in the Council (European Parliament) R&TTE Directive (1999/5/EC). For the evaluation regarding this Directive, the following standards were applied: EN 302 326-2 V1.2.2 (2007-06), EN 302 326-3 V1.3.1 (2008-02) EN 301 489-1 V1.8.1 (2008-04); EN 301 489-4 V1.3.1 (2002-08) EN 55022:2006+A1:2007; EN 55024:1998+A1:2001+A1:2003 EN 62311:2008 ; EN50385:2002 EN 60950-1:2006
54USBw 200NOV 2009USBw 200 NOV 2009Important Safety and Legal InformationImportant Safety and Legal Information关于符合中国《电子信息产品污染控制管理办法》的声明 Management Methods on Control of Pollution From Electronic Information Products(China RoHS declaration)The China Management Methods (CMM) Disclosure Table is intended only to communicate compliance with China requirements; it is not intended to communicate compliance with EU RoHS or any other environmental requirements.CMM DisclosureIn non-EU countries, dispose of Motorola Networks equipment in accordance with national and regional regulations.Disposal of Motorola Equipment in Non-EU CountriesThis product is compliant with the requirements of the European Union Restriction of Hazardous Substances (EU RoHS) directive.Please do not dispose of Motorola Networks equipment in landfill sites.In the EU, Motorola Networks in conjunction with a recycling partner will ensure that equipment is collected and recycled according to the requirements of EU environmental law.Disposal of Motorola Equipment in EU CountriesThe following information is provided to enable regulatory compliance with the European Union (EU) Directive 2002/96/EC Waste Electrical and Electronic Equipment (WEEE) when using Motorola Networks equipment in EU countries.Caring for the Environment
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office.All other product or service names are the property of their respective owners. © 2009 Motorola, Inc.USBw 200 Quick Start GuideQuick Start GuideIncluded in boxUSBw 200 Installation Procedure1. Insert the USBw 200 into your laptop computer’s USB port. a. Windows XP: If setup does not automatically start: click “Start” and choose “Run”. Type “D:\setup.exe” (where D is the USB drive designation) and click “OK”. b. Windows Vista: If setup does not automatically start: click “Start” and choose “Computer”, right click on “USB drive” or “CD drive” and choose “open auto play”. Select “run setup.exe”.2. Follow the software installation steps on your screen.3. Begin browsing the Internet.4. Set up your Wi-Fi networks. You may pre-set your frequently used Wi-Fi locations now or set them up later as you encounter them. a. To pre-set the Wi-Fi locations now, click “Profiles” and then “Add” and follow the steps to set up each Wi-Fi network. b. To set up Wi-Fi networks as you encounter them, open the connection manager and click the Wi-Fi tab, then click the available networks text. Select the desired network and click the “Connect” button. If required, input the security key and click “Connect”.Quick Start Quide
• To set up Wi-Fi networks as you encounter them, open the connection manager and click the Wi-Fi tab, then click the available networks text. Select the desired network and click the “Connect” button. If required, input the security key and click “Connect”.• To pre-set the Wi-Fi locations now, click “Profiles” and then “Add” and follow the steps to set up each Wi-Fi network. Set up your Wi-Fi networks.You may pre-set your frequently used Wi-Fi locations now or set them up later as you encounter them3----------------------------------------------------------------------------------------------------------------------------------- do not insert your USB device until the installation is complete.Follow the software installation steps on your screen2Unzipping CWMulfModePlus.slo• Insert the unit into your laptop computer’s USB port. Windows XP: If setup does not automatically start: click “Start” and choose “Run”. Type “D:\setup.exe” (where D is the USB drive designation) and click “OK”. • Windows Vista: If setup does not automatically start: click “Start” and choose “Computer”, right click on “USB drive” or “CD drive” and choose “Open Auto Play”. Select “Run Setup.exe”Insert the USBw 200 into your laptop computer’s USB port1

Navigation menu