NetComm Wireless NRB0200 Antenna alignment tool User Manual

NetComm Wireless Limited Antenna alignment tool

User manual

Quick Start GuideAntenna Alignment ToolAIMWLLR0-35QSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 1 21/12/2016 2:02 PM
| AIMWLLR0-352WelcomeThis quick start guide is designed to familiarize you with the features and use of the NetComm Wireless Antenna Alignment Tool. The Antenna Alignment Tool is a battery-powered tool which connects to the alignment port on the back of a NetComm Wireless Outdoor Antenna, providing power and a wireless access point. The installer can then use a portable wireless device, such as a laptop or tablet, to connect to the antenna to read signal strength data and align it in the optimal position.QSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 2 21/12/2016 2:02 PM
| AIMWLLR0-353Antenna Alignment ToolPackage contentsThe AIMWLLR0-35 package includes:1 x AIMWLLR0-35 Antenna Alignment Tool (in pouch)1 x Quick Start Guide1 x WiFi security card1 x Micro USB to Type-A charge cable 1 x AC wall charger (5V/2A)1 x Antenna Alignment Tool pouchQSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 3 21/12/2016 2:02 PM
| AIMWLLR0-354Device overview ITEM DESCRIPTION1Connector protective capProtects the connector from dust and moisture when the Antenna Alignment Tool is not in use.2Power button Push once to toggle the Antenna Alignment Tool on and off. When not connected to the antenna and turned on, the Antenna Alignment Tool displays the remaining battery charge level. See the LED indicator section for details on the battery level indication. When it is turned on, if it is not connected to the antenna within approximately 20 seconds, the Antenna Alignment Tool turns off automatically. When the Antenna Alignment Tool is disconnected from the antenna, it powers off automatically. 3Micro USB port to charge the batteryThe Micro USB port connects to a USB power source using the supplied USB cable to charge the internal battery. Connect the Antenna Alignment Tool to a 5V/2A power source for optimum charging speed.4Multipurpose LED indicators The LED indicators on the Antenna Alignment Tool are multifunctional. They display:1. Remaining battery level when the battery check button is pressed or the unit is charging (Battery check mode)2. RF signal strength during alignment (Cell scanning mode)3. System status when the outdoor antenna is in normal operation (Normal operation mode).See the LED indicator section for more information.QSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 4 21/12/2016 2:02 PM
| AIMWLLR0-355Antenna Alignment Tool1 324QSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 5 21/12/2016 2:02 PM
| AIMWLLR0-356Charging the Antenna Alignment ToolThe included USB cable can be used to charge the Antenna Alignment Tool. Connect the USB cable from the Micro USB port on the Antenna Alignment Tool to the included AC wall charger or another 5V/2A power source for optimum charging speed. The LED indicators on the side of the Antenna Alignment Tool light up and may ash depending on the remaining battery level. See the LED indicator section for details on reading the battery level.QSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 6 21/12/2016 2:02 PM
| AIMWLLR0-357Antenna Alignment ToolChecking the remaining battery levelPress the Power button once. The Antenna Alignment Tool goes into Battery check mode and the LED indicators light up according to the description in the LED indicators section of this guide.QSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 7 21/12/2016 2:02 PM
| AIMWLLR0-358LED Indicators The LED indicators display different things depending on the mode of the Antenna Alignment Tool.a) Battery check mode – When the power button is pressed or the battery is charging. 95-100% 80-94% 65-79% 50-64% 35-49% 20-34% 0-19%QSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 8 21/12/2016 2:02 PM
| AIMWLLR0-359Antenna Alignment Toolb) Cell scanning mode - When the Antenna Alignment Tool is connected to an Outdoor Antenna. Strong signal Medium signal Low signal No cell detected QSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 9 21/12/2016 2:02 PM
| AIMWLLR0-3510c) Normal operation mode – When the Antenna Alignment Tool is connected to an Outdoor Antenna.LED 1 indicates the Ethernet connection status of the antenna.LED 1 DESCRIPTIONLink is upActivity on EthernetLED 2 indicates the Cellular connection status of the antenna.LED 2 STATUS DESCRIPTIONData APN attachedData APN attachingLTE registeredLTE registeringLTE not registeredLED 3 indicates the Power status of the antenna.LED 3 STATUS DESCRIPTIONNo powerPower onQSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 10 21/12/2016 2:02 PM
| AIMWLLR0-3511Antenna Alignment ToolBefore beginning to align an outdoor antenna, press the battery check button on the bottom of the Antenna Alignment Tool and observe the battery level indicated by the LED indicators. Ensure that you have an adequate charge level for the installation.To align an outdoor antenna:1. Prepare the outdoor antenna as per the Installation Guide.2. On the outdoor antenna, locate the alignment port and remove the protective cap from it.Using the Antenna Alignment Tool to align an outdoor antennaQSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 11 21/12/2016 2:02 PM
| AIMWLLR0-35123. Remove the protective cap from the Antenna Alignment Tool’s connector then connect the Antenna Alignment Tool to the alignment port of the antenna as shown below.4. When the device is positioned at the mounting location, press the Antenna Alignment Tool’s Power button once to turn it on.QSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 12 21/12/2016 2:02 PM
| AIMWLLR0-3513Antenna Alignment Tool5. Wait approximately 1 minute for the antenna to go through its boot up process.6. Using a portable wireless device such as a laptop or tablet, scan for nearby wireless networks. Connect to the network being broadcast by the Antenna Alignment Tool using the Network Name and Password which are printed on the label and on the WiFi security card included in the package. When the wireless connection has been established, use your wireless device to browse to the IP address of the antenna. To complete the installation, follow the Installation Guide that comes with your outdoor antenna.NOTE: When the Antenna Alignment Tool is connected to the Outdoor Antenna, do not point the front panel of the antenna directly at other people or yourself. Always maintain a separation distance of 8 inches between any part of your body and the front of the antenna (the ofcial FCC recommendation species 20cm separation). We recommend that you disconnect the PoE cable and Antenna Alignment Tool if you are working in proximity to the antenna and it is not required to be on.QSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 13 21/12/2016 2:02 PM
| AIMWLLR0-3514RF ExposureThe AIMWLLR0-35 contains a transmitter and a receiver. When it is on, it receives and transmits RF energy. When you communicate with your device, the system handling your connection controls the power level at which your device transmits.The AIMWLLR0-35 meets the government’s requirements for exposure to radio waves. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.The AIMWLLR0-35 complies with radio frequency (RF) exposure limits adopted by the Federal Communications Commission for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.The approved module is being used in this device.This product contains FCC ID: XIA-NRB0200QSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 14 21/12/2016 2:02 PM
| AIMWLLR0-3515Antenna Alignment ToolFCC StatementFCC complianceFederal Communications Commission Notice (United States): Before a wireless device model is available for sale to the public, it must be tested and certied to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure.FCC regulationsThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help.Changes or modications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.QSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 15 21/12/2016 2:02 PM
QSG-00097 rev6Product WarrantyFor warranty information please visit http://www.netcommwireless.com/ Safety and product carePlease refer to the user guide for safety and product care information.NETCOMM WIRELESS LIMITED ABN 85 002 490 486Head Ofce, 18-20 Orion RoadLane Cove, Sydney, NSW 2066, Australiap: +61 2 8205 3888 f: +61 2 9424 2010e: sales@netcommwireless.comwww.netcommwireless.comQSG-00097 rev 7 AIMWLLR0-35 [NRB-0200] QSG.indd 16 21/12/2016 2:02 PM

Navigation menu