Neets A S 313-0003 Touch Panel User Manual

Neets A/S Touch Panel

user manual

Installation guide Neets Touch Panel 10”
Thank you! Thank you for including the Neets Touch Panel as part of the user interface strategy for your customer.
SpecificationsPhysical Dimensions:H: 169 mmW: 246 mmD: 41,4 mmIn wall: 25,4 mmOn wall: 16,5 mmShipping dimensions:59 mm x 291 mm x 216 mm (HxWxD)Weight:Product: 0,56 KgWall Bracket: 0,175 KgShipping: 1,1 Kg Connections:RJ45 with POE – For Power and Ethernet communication Micro USB – For application and firmware upgrade onlySwitches:Pen hole switch: 1: Access to Admin settings 2: Factory Reset switch 3: For FW upgrade onlyTouch Screen:5-point capacitive touch screenScratch resistant glass-on-glass touch screenDisplay:10 IPS Display, Resolution: 1280x800 pixelsBrightness: 350 nits (cd/m2)Sensors:Proximity sensor – For automatic display activationAmbient Light sensor – For automatic backlight dimmingPower: Power Over Ethernet (POE), IEEE802.3af, 48VEnvironment:Operating Temp: 0 to 40 C / 32 to 104 FStorage Temp: 0 to 60 C / 32 to 140 FOperation moisture: Humidity: 10% to 90% RH Compliancy:CE, FCCDoc. 313-003-003 Rev. 12
What’s in the box10” Touch PanelClothWall mount bracket3
4 x Wall plugs4 x ScrewsUSB OTG adapter (for application and firmware upgrade)Ejector pin formenu settings4
Front Ambient light sensor51 246 mm1 169 mm Proximity sensor
BackFirmware upgradeFactory Reset USBMagnets Settings buttonLAN/POEMagnetMagnet6
Steps1 Touch Panel position2 Bracket details3 Mounting the bracket4 Connect LAN/PoE5 Mount Touch Panel on bracket6 Connect PoE injector7 First start up7
1 Touch Panel position165 cm / 65 in.145 cm / 57 in.The Touch Panel is designed to wall mount in landscape orientation, and depending on how tall the users are we recommend locating the center of the touch panel between 145 cm. – 165 cm. (57” – 65”) above the finish floor. 8
2Bracket details9The Touch Panel is designed to mount into a 1- or 2-gang back box in EU, US or DK standards or can be mounted without a back box. When using EU and US standards use the threads that are already in the back box and secure the bracket with fitting screws. When using a DK standard back box use the holes marked with “W” for mounting directly on the wall. To mount the Touch Panel without back box use holes marked with “W”.
Alignment holes – do not use these for screws Holes for mounting directly into the wallUS 2-gang back boxUS 1-gang back boxEU 2-gang back boxEU 1-gang back boxWA4321A123444423221W WW WA10The numbers on the bracket refers to the back box it is intended for.
When mounting the Touch Panel into a EU/US back box follow the steps below. In case you are not mounting on a EU/US back box skip step 1.Before you start make sure the wall is even to prevent distorting the bracket.3Mounting the bracket65432111Mount the bracket onto the back box using the screws and screw holes for the specific type of back box (see page 10)Mark the center of the W-holes in the bracketDrill and insert wall plugsLevel the bracket on the wall (When mounting onto a back box do this before tightening the screws)Remove the bracket againMount the bracket and tighten the screws into the wall
12
Connect the PoE cable from the wall to the Touch Panel.Connect LAN / PoE4 13
Place the Touch Panel onto the bracket. Make sure it is placed correctly and the alignment holes are free to fix the Touch Panel to all four magnets.Mount Touch Panel on bracket5 14
Power outletLAN switch6 Connect PoE injectorPOELAN15
The Touch Panel will automatically power on when power is applied. Wait for the unit to start up and follow the instructions. For a complete configuration guide please go to:www.neets.dk/products/touch-panels/You will find the instructions for firmware updates the same place.7 First start up16
Removing the Touch PanelUsing two hands grasp on each side of the Touch Panel and pull straight out from the wall. 17
WarningThis equipment should be operated only from the included power supply. To remove power from the equipment safely, remove all power cords from the rear of the equipment, or the desktop power module (if detachable), or from the power source receptacle (wall plug).Power cords should be routed so that they are not likely to be stepped on or pinched by items placed upon or against them.Do not defeat the safety purpose of a polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Unplug this apparatus during lightning storms or when unused for long periods of time.Refer all servicing to qualified service personnel. There are no user-serviceable parts inside. To prevent the risk of shock, do not attempt to service this equipment yourself because opening or removing covers may expose you todangerous voltage or other hazards. Contact your local Neets reseller or distributor.If the equipment has slots or holes in the enclosure, these are provided to prevent overheating of sensitive components inside. These openings must never be blocked by other objects.Do not use this equipment near water.To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and objects filled with liquids.Unplug the product before cleaning. Clean only with a dry cloth and not cleaning fluid or aerosols. Such productscould enter the unit and cause damage, fire, or electric shock. Some substances may also mar the finish of the product.CautionRead these instructions. Read and understand all safety and operating instructions before using the equipment. Keep these Instructions.The safety instructions should be kept for future reference. Heed all warnings. Follow all warnings and instructions marked on the equipment or in the user information. Avoid attachments. Do not use tools or attachments that are not recommended, as they may be hazardous.FCC WarningThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.NOTE 2: Any changes or modifications to this unit not expressly approved by the party respon-sible for compliance could void the user’s authority to operate the equipment.
Neets A/S | Langballe 4, 8700 Horsens, Denmark | +45 75 666 099 | sales@neets.dk | www.neets.dkLearn more at neets.dk Visit our website neets.dk for additional information about the product and the latest firmware.

Navigation menu