Nedap N V VELOS3 RFID Reader for Livestock User Manual manual

N. V. Nederlandsche Apparatenfabriek NEDAP RFID Reader for Livestock manual

manual

Service manual For installation, operation and service ISO Reader Solid (CAN) VP1101 March 2009 / Manual version 1.0
VP1101-200PM-00 ISO Reader Solid (CAN) Manual version 1.0 Version overview Manual version 1.0 / 3-2009 First release This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no license under any patent or other right, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher. © Nedap N.V., AGRI P.O. Box 104 NL-7140 AC GROENLO The Netherlands
VP1101-200PM-00 ISO Reader Solid (CAN) Manual version 1.0 VP1101 ISO Reader Solid CAN Contents 1 Introduction 1 2 Description and functioning 1 3 Safety 1 4 Installation 2 4.1 Mounting 2 4.2 Connections 2 5 Adjustments 2 6 Trouble shooting 2 7 Maintenance, cleaning and disposal 2 Appendix A: Specifications 3
VP1101-200PM-00 ISO Reader Solid (CAN) Manual version 1.0
VP1101-200PM-00 ISO Reader Solid (CAN) Manual version 1.0 / Page 1 Preface This manual is part of the service documentation for Nedap Velos. Reference is also made to other manuals that are part of the Nedap Velos documentation. For an overview of available Nedap Velos manuals see the manual “Nedap Velos General Description”, or visit the Nedap Agri website www.nedap-agri.com. 1 Introduction The Velos VP1001 is a Velos component that is used to identify RFID tags on animals. The VP1101 is installed close to the spot where identification is required, for example on the animal feeder. 2 Description and functioning A VP1101 is connected to the CAN-bus and can identify tags on ISO frequency 134.2 kHz. There are two types, FDX/HDX or FDX only. 3 Safety Installation and service only by trained personnel. Always turn off the main power when working on the electrical installation. Compliance statement (part 15.19) This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Warning (part 15.21) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
VP1101-200PM-00 ISO Reader Solid (CAN) Manual version 1.0 / Page 2 4 Installation 4.1 Mounting See the relevant equipment manual relating to where the VP1101 is to be installed. (e.g. feeder). 4.2 Connections Details VP1101 wiring Brown + Input voltage 25 VDC, +20% -20% White - Minus Green CH CAN high Yellow CL CAN low Shield Shielding of CAN-bus cable Grey ~ Synchronization (antenna) Pink ~ Synchronization (antenna) 5 Adjustments A VP1101 is pre-tuned and ready for use. No antenna adjustments required because of automatic fine tuning. 6 Trouble shooting Errors / malfunctioning are indicated at the controlling computer. 7 Maintenance, cleaning and disposal Maintenance No regular maintenance required. Software update By the CAN bus there is a possibility to update the software. Cleaning A VP1101 can be cleaned with water and sponge. Avoid (aggressive) cleaning liquids. Disposal Discard according to the regulations prevailing at the time of disposal
VP1101-200PM-00 ISO Reader Solid (CAN) Manual version 1.0 / Page 3 Appendix A: Specifications Specifications VP 1101 Dimensions 2850 x 1700 x 45 mm LxWxH CAN CAN-bus communication 125 kBit Power Input voltage 25 VDC, +20% -20% Power consumption 200 mA with antenna switched on Protected against reverse connection power supply Software Downloadable by the CAN network Antennas Internal fixed antenna Detection distance Depending on used tags Synchronization Synchronization according to ISO 11785, ISO 24631-7 Environment Temperature: Operating: -10 – 50 °C, Storage: -25 – 70 °C Relative humidity: 10 – 93% non condensing IP class IP 65. Always use a NEDAP power supply. The Nedap guarantee-regulations are only valid when is installed as indicated in this manual. Install data cables at a safe distance from (high) powered cables More information For more detailed information contact your local Nedap supplier or check the internet site.

Navigation menu