Nedap N V SF-CU Lighting Remote Control Transmitter User Manual

N. V. Nederlandsche Apparatenfabriek NEDAP Lighting Remote Control Transmitter

user manual

Control Unit Senzafil Copyright © NEDAP Installation Manual Installation Manual Senzafil Control Unit 1. Mounting Instructions The control unit has a construction with the ability to mount on a DIN rail. Nedap recommends to use the Nedap Light Controls Box to build-in the control unit. (Nedap p/n …………..) 2. Connections Details inputs and outputs +24V* + +24Vdc / 2% power input Input current: 0.3Adc max - gnd RS232 Optional CAN Optional Group 1..8 ON ON/OFF Input Closed=ON Open=OFF Levels: <3.5Vdc OFF and >4.5Vdc ON DIM DIM Input (Source current: 1mA (for light sensors)) Via switch: Closed=50% Open=100% Via 10kΩ potmeter: 0kΩ=50% 10kΩ=100% Via 1-10V Light Sensor: 1V=50% 10V=100% Via 1-10V PLC/BMS: 1V=50% 10V=100% ERR Error Output Contact to gnd: 30V/2A max * NOTE: Use isolated 24Vdc limited power supply with 2.5A max current. For US/Canada use a listed class 2 power supply. (e.g. MAIN WELL type GS15E-6P1J) +24Vdc ON inputs+24Vdc IndicatorTo e.g. PLCORUse of error contact1-10V DIM inputs Note: The control unit must never be installed in a metal power cabinet. This would impede wireless communication.
Control Unit Senzafil Copyright © NEDAP Installation Manual 2. Led indications POWER On Power on Off Power off CRTL Fast blinking Controlling lamps Regular blinking (1s) EEPROM error (RF LED also blinking) Off Control ready RF Irregular blinking Receiving RF packets Regular blinking (1s) EEPROM error (CTRL LED also blinking) Off Receiving no RF packets LAMP ERROR x On Lamp driver fault group x (>threshold) Blinking Lamp fault group x Off No errors group x 4. Specifications FCC Declarations Compliance statement (part 15.19) This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning (part 15.21) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF Exposure (OET Bulletin 65) To comply with FCC RF exposure requirements for mobile transmitting devices, this transmitter should only be used or installed at locations where there is at least 20cm separation distance between the antenna and all persons. Version: 1.0 Nedap P/N: 8015228 Input Voltage Operating temperature Safety EMC 24Vdc ±2%0 – 60°C EN60950 / Design to meet UL60950-1EN301489-1 / FCC47 part 15 and 18Dimensions (l x b x h) 145 x 120 x 65 mm

Navigation menu