Nedap N V PROX1356 Inductive Proximity RFID Card Reader User Manual User 04

N. V. Nederlandsche Apparatenfabriek NEDAP Inductive Proximity RFID Card Reader User 04

Contents

User 04

[Installation Guide] Installation Guide Version 1.1 | 12 May 2011
2
3 info@nedaplibrix.com Nedap Librix Parallelweg 2d Groenlo The Netherlands Nedap Librix P.O. box 102 7140 AC Groenlo The Netherlands Tel: +31(0)544 47 15 09 Fax: +31(0)544 46 58 14 ©Nedap Librix Netherlands Parallelweg 2d, 7141 DC Groenlo The software / hardware described in this document / file is furnished under a license agreement and may be used only in accordance with the terms of agreement. Documentation Installation Guide Flexdesk Copyright Notice Any technical documentation that is made available by Nedap Librix is the copyrighted work of Nedap Librix and is owned by Nedap Librix. NO WARRANTY. The technical documentation is being delivered to you and Nedap Librix makes no warranty as to its accuracy or use. Any use of the technical documentation or the information contained herein is at the risk of the user. Documentation may include technical or other inaccuracies or typographical errors. Nedap Librix has the right to make changes without prior notice. No part of this publication may be copied without the express written permission of Nedap Librix, Parallelweg 2d, 7141 DC Groenlo, The Netherlands. Trademarks Nedap and the Nedap logo are registered trademarks of N.V. Nederlandsche Apparatenfabriek “Nedap”, Parallelweg 2, 7141 DC Groenlo, The Netherlands. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Printed in the Netherlands.
4 Date Version Description 21-04-2011 1.0 First version 12-05-2011 1.1 Added text to FCC section
5
6 The following safety instructions and precautions should be observed during normal use, service and repair. Do not change anything regarding the prox reader or the installation procedure. Always switch off the power (by disconnecting the power plug) before you remove the cover.
7 The flexdesk can be used for checking out and/or in books and cd‟s. A prox 13.56MHz reader is pre-installed inside the desk. The prox is connected to a pc inside a flexdesk. The pre-installed software Bibliocheck4Selfservice can be configured to operate in checkin, checkout or combi mode. The software can connect to the library management system (LMS) over the SIP2 or NCIP protocol. An integrated ticket printer can be used to issue tickets to a patron. This document describes the hardware and software installation for a flexdesk. The following items are included: 1x [A] flexdesk with pre-installed embedded pc, touchscreen, PROX 13.56MHz transceiver 1x [B] 2M UTP network cable 1x [C] USB keyboard 1x [D] USB mouse 1x [E] Power cable with European connector A B D E C
8 The flexdesk is pre-installed with all required hardware and software. The hardware only needs to be connected to a power source, and to the network over a UTP cable. Figure 1 - power and network connector 1. Connect the power cable [E] to the power connector on the back of the flexdesk. 2. Connect the UTP network cable [A] to the UTP connector on the back of the flexdesk that is labeled „ PC‟ . 3. Switch on the power of the flexdesk by pushing the red power switch. 4. The PC inside the flexdesk will automatically start when power is applied to it. 5. If the screen stays black, only the screen must be turned on manually. This can be done by pressing the power button on the right side of the screen ( ) The software running on the flexdesk is Bibliocheck4Selfservice. Refer to the manual for this software package for more information about the installation and configuration of this program. Power Network
9 This device contains PROX1356 with FCC-ID: CGDPROX1356 and IC: 1444A-PROX1356 Part 15.19(3) and RSS_Gen Labelling This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operating is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil se conforme aux normes RSS 210 exemptés de license du Industry Canada. L'opération est soumis aux deux conditions suivantes : (1) cet appareil ne doit causer aucune interférence, et (2) cet appareil doit accepter n'importe quelle interférence, y inclus interférence qui peut causer une opération non pas voulu de cet appareil. Warning (part15.21) Changes or modifications not expressly approved by party responsible for compliance could void the user‟s authority to operate the equipment.
10 Article number: 9927786 / 9930400 Dimensions (cm): Standard furniture: ca. 100 x 83 x 130 (l x w x h) Height desk: ca. 75 Height ring (optional): 10 or 20 Material: Metal, MDF, vulkanit Standard color: Wood Red U-225 Metal Ral 7016 Optional color: Any color at extra costs Weight: ca. 70 kg Function: Check-in, -out, combi Check in of CDs/DVDs: Yes Supply voltage: 110_230 V, 50-60Hz Working voltage: Reader: 24 V - 12 V - 9 V Power consumption: Max. 100 Watt Length power cable: 1.8 m User interface: Touchscreen 15 inch PC: Type: Industrial PC or Touch PC Operating system: XP Embedded SP3 Connections: USB, Lan, VGA, Serial, Audio Communication cable: Standard UTP Printer: Thermal, paper 80 mm Compatibility: Software: Bibliocheck4 Selfservice Reader: Nedap Prox. Reader, art. nr. 9934634 Antenna power: Max. 1 Watt Technology: RFID Frequency: 13.56 MHz Identifies: ISO 15693 / ISO 18000-3.1 EAS function: Yes, EAS-bits and/or AFI Patron card reader: Standard : Barcode card reader or RFID/Mifare card reader Optional: Magnetic card Operational temperature: +10 / +45 °C Storage temperature: 0 / +55 °C Certificate: CE / EMC / FCC Warranty: 1 year
11 This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no license under any patent or other right, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher. Nedap Librix P.O. Box 102 NL-7140 AC Groenlo The Netherlands

Navigation menu