Nedap N V DVD31356 Inductive RFID Card Reader User Manual User 03

N. V. Nederlandsche Apparatenfabriek NEDAP Inductive RFID Card Reader User 03

Contents

User 03

[Installation Guide] Installation Guide Version 1.1 | 12 May 2011
2 info@nedaplibrix.com Nedap Librix Parallelweg 2d Groenlo The Netherlands Nedap Librix P.O. box 102 7140 AC Groenlo The Netherlands Tel: +31(0)544 47 15 09 Fax: +31(0)544 46 58 14 ©Nedap Librix Netherlands Parallelweg 2d, 7141 DC Groenlo The software / hardware described in this document / file is furnished under a license agreement and may be used only in accordance with the terms of agreement. Documentation Installation Guide PG45-13.56MHz Copyright Notice Any technical documentation that is made available by Nedap Librix is the copyrighted work of Nedap Librix and is owned by Nedap Librix. NO WARRANTY. The technical documentation is being delivered to you and Nedap Librix makes no warranty as to its accuracy or use. Any use of the technical documentation or the information contained herein is at the risk of the user. Documentation may include technical or other inaccuracies or typographical errors. Nedap Librix has the right to make changes without prior notice. No part of this publication may be copied without the express written permission of Nedap Librix, Parallelweg 2d, 7141 DC Groenlo, The Netherlands. Trademarks Nedap, the Nedap and Librix logo are registered trademarks of N.V. Nederlandsche Apparatenfabriek “Nedap”, Parallelweg 2, 7141 DC Groenlo, The Netherlands. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Printed in the Netherlands.
3 Date Version Description 18-04-2011 1.0 First version 12-05-2011 1.1 Added text to FCC section
4 1.1 Notices 04 ||||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 This Quick Installation Guide describes the installation of the PG45-PCC-13.56. The used antenna images may differ from the ones you will be installing. However, the installation procedure remains the same. All measurements in this guide are based on past experiences. However, local environment properties may cause the need to change them. The quality of the used labels also influences the detection capabilities. 1. The distance between two antennas must be approximately 1050 mm. 2. In a range of 2 meters within the EAS- antennas there may not be any labeled articles. If there are labels within this distance then a shielding must be placed. 3. The distance between the antenna and door when opened is minimal 300 mm. Consider this before installing the tubes in the floor.
6 Panel distance ca. 105cm 2 loop antenna 3 loop antenna Reader unit Model: DVD31356 Network Power: 100/230Vac 1 ferrite core per cable Coax RG-58 (for cable length see LIBRIX support site) 2x (diameter 5mm) 2 way splitter
7 Panel distance ca. 105cm 2 loop antenna 3 loop antenna 3 loop antenna 3 loop antenna 2 loop antenna 2 loop antenna or or Reader unit Model: DVD31356 Network Power 100/230Vac 3 way splitter Coax RG-58 (for cable length see LIBRIX support site) 3x (diameter 5mm)
8 STEP 1: Mark the holes used for mounting the antennas. Keep the following dimensions in mind: STEP 2: Drill the marked holes using a hammer drill supplied with a 13 mm drill. The holes need to be approximately 90 mm deep. STEP 3: Clean the holes and place the anchors (which the antennas will be bolted to) according to anchor specification.
9 STEP 4: Use (the told) conduits for wiring the antennas. STEP 5: Install the antenna by using the anchors and supplied materials. STEP 6: Connect the antenna wires to the electronics as shown.
10 FCC for USA according to Part 15a with FCC ID: CGDDVD31356 IC for Canada according to RS-210 with IC: 1444A-DVD31356 Part 15.19(3) and RSS_Gen Labelling This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operating is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil se conforme aux normes RSS 210 exemptés de license du Industry Canada. L'opération est soumis aux deux conditions suivantes : (1) cet appareil ne doit causer aucune interférence, et (2) cet appareil doit accepter n'importe quelle interférence, y inclus interférence qui peut causer une opération non pas voulu de cet appareil. Warning (part15.21) Changes or modifications not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment.
11 Article numbers: PG 45; 2 loop / 3 loop: 9940448 / 9940456 Dimensions (mm): PG 45: 1665 x 480 x 100 (l x w x h) Material: PG 45: Metal / Plexiglas Color: PG 45: Transparent Weight: PG 45: ca. 29 kg Function: Detects labels with EAS = on / AFI 07 HEX Optional expansions: - Light alarm, integral, - Integral customer counter Identification %: Dependent on label quality / environmental influences Article number: 9926798 Supply voltage: 100_230 V, 50-60Hz Operating voltage: 24 V Power consumption: 45 Watt Length power cable: 1.8 m. RF connection: 50 Ohm BNC coax Operating temperature: +10 / +45 °C Storage temperature: -10 / +55 °C Max. distance between two antennas: PG 45: 1.05 m Technology: RFID Frequency: Standard: 13.56 MHz Antenna power (electrical): Max. 8 Watt RF antenna power: 37µWatt Identifies: ISO 15693 / ISO 18000-3.1 EAS-function: Yes, based on EAS-bits and/or AFI Certificate: CE / EMC / FCC Warranty: 1 year
12 This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no license under any patent or other right, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher. Nedap Librix P.O. Box 102 NL-7140 AC Groenlo The Netherlands

Navigation menu