NVIDIA P3310 WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth User Manual P3310 Integration Notes

NVIDIA Corporation WLAN 2x2 MIMO 802.11a/b/g/n/ac with Bluetooth P3310 Integration Notes

Contents

P3310_Integration_Notes

Regulatory Module Integration Instructions This module has been granted modular approval for mobile applications. OEM integrators for host products may use the module in their final products without additional FCC / ISED (Innovation, Science and Economic Development Canada) certification if they meet the following conditions. Otherwise, additional FCC / ISED approvals must be obtained. • The host product with the module installed must be evaluated for simultaneous transmission requirements. • The users manual for the host product must clearly indicate the operating requirements and conditions that must be observed to ensure compliance with current FCC / ISED RF exposure guidelines. • To comply with FCC / ISED regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed the following: Peak Antenna Gain Frequency(GHz) 2.4 2.44 2.48 5.2 5.3 5.5 5.6 5.8 Gain(dBi) 2.41 2.81 2.86 5.49 5.57 4.81 4.84 1.99 Antenna Manufacturer: Pulse, Part Number: CW1043, Type: Dipole Antenna Cable Loss Frequency(GHz) 2.4 2.44 2.48 5.2 5.3 5.5 5.6 5.8 Cable Loss (dBm) 0.9 0.9 0.9 2 2 2 2 2 Cable Manufacturer : Pulse, part number: CW9009 • Any device incorporating this module must include an external, visible, permanent marking or label which states: Contains FCC ID: VOB-P3310 Contains IC: 7361A-P3310 The final host / module combination may also need to be evaluated against the FCC Part 15B criteria for unintentional radiators in order to be properly authorized for operation as a Part 15 digital device. If the final host / module combination is intended for use as a portable device (see classifications below) the host manufacturer is responsible for separate approvals for the SAR requirements from FCC Part 2.1093 and RSS-102. Note: In the case where the Host / Module combination has been re-certified the FCC ID shall appear in the product manual.

Navigation menu