NEC of America KMP6J1L1-9 Dual-Band GSM Phone User Manual C 535 535 FCC vp

NEC Corporation of America Dual-Band GSM Phone C 535 535 FCC vp

Users Manual

Copyright Ó2004 by NEC America, Inc. All rights reserved.NEC is a registered trademark of NEC Corporation.All other company or product names are the trademarks of their respective owners.Manual Part Number: 621-0353Version 1****This may include features not available in all NEC 535 phones, or may not include features available in updated or later versionNEC 535 phones. Contact NEC Service Support with any questions.NEC America, Inc. (”NEC”) reserves the right to make changes or improvements to any of the products described in this guidewithout prior notice.All features, specifications, conditions, and actual colors are subject to change without notice.The availability of particular products may vary by region. Some operations and features are network and subscription dependentand are not available in all areas. Check with your wireless service provider for availability and description of features.Some of the mobile Internet services have been pre-configured by the service provider.Printed in U.S.A.THE CONTENTS OF THIS GUIDE ARE PROVIDED ON AN “AS IS” BASIS. EXCEPT AS REQUIRED BY APPLICABLE LAW, NOWARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIEDWARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING THEACCURACY, COMPLETENESS, OR CONTENTS OF THIS GUIDE. NEC RESERVES THE RIGHT TO REVISE OR RESCINDTHIS GUIDE AT ANY TIME WITHOUT PRIOR NOTICE.NEC IS NOT RESPONSIBLE FOR ANY LOSS OR CORRUPTION OF DATA, LOSS OF INCOME OR BUSINESS, OR ANYCONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGE, HOWSOEVER CAUSED.WARNING! The power cords of this product contain lead, a chemical known to the State of California to cause birth defects or otherreproductive harm. Wash hands after handling.i
ContentsNEC 535 1Wireless System Structure.......................1User Guide Conventions ........................1User Guide Instructions .......................2Keypad Phone Controls.......................2Phone Controls ............................3Parts and Functions ..........................4Display Information ..........................5Check box and Radio Buttons ...................5LCD and Displayed Icons .......................6Main Menu ...............................8Sub-Menus and Options Menu ...................9Menu Shortcut Selection ......................9Keypad Shortcuts...........................10Main Phone Features.........................11Safety and Performance 12User Caution .............................12Emergency Services .........................12Safety.................................13General Care ...........................13...................................13General Safety...........................14Radio Frequency (RF) Signals ..................15Aircraft Safety ................................16Road Safety ............................16Vehicles Equipped with an Air Bag ................16Blasting Areas And Explosive Atmospheres............16Electromagnetic Interference ...................17Battery Care and Disposal ......................18Performance .............................19Third Party Equipment .......................19Service...............................19Efficient Use ............................19Battery ...............................19Antenna ..............................19Licenses ..............................20Getting Started (TBD) 21Service Activation...........................21Voice Mail and Text Messaging ...................21PIN and Security Codes .......................21SIM Card ...............................22Inserting a SIM Card........................22Removing a SIM Card .......................23Charging the Battery .........................24Battery ................................25Checking the Battery .......................25Low Battery Alarm .........................26Changing the Battery .......................26Powering-On the Phone .......................27Turning the Phone On .......................27Turning the Phone Off .......................27Basic Calls and Phone Use (TBD) 28Dialing Calls .............................28Correcting Mistakes ........................28Ending Calls .............................28Receiving Calls ............................29Accepting a Call ..........................29Rejecting a Call ..........................29Receiving a Call While in an Application ...............30Using Features/Application During a Call ..............30Unsuccessful Calls/Auto Redial ...................30Call Features .............................31Caller ID ..............................31Returning an Unanswered Phone Call ..............31Last Number Redial ........................31Dialing a Number in Message Text ................31Emergency Calls..........................32ii
Speed Dialing ...........................32Entering a Pause (for DTMF Dialing) ...............32International Dialing ........................33Volume Controls ..........................33Voice Mail .............................34Forwarding Calls ...........................34Call Timer...............................34Using Call Features During a Call ..................34Placing a Call On Hold.......................34Call Waiting ............................35Mute A Call ............................35DTMF Tones............................35Conference Calls ...........................36Receiving Second Call.......................36Making a Second Call ......................36Putting Calls on Hold .......................37Private Conversation .......................37Disconnecting a Party .......................37Roaming ...............................38Personalizing Settings (TBD) 39Phone Settings ............................39Text Entry (TBD) 40Messaging and Voice Mail (TBD) 41Accessing Messages .........................41Web Browser (TBD) 42Phonebook (TBD) 43Camera Function (TBD) 44Camera View Finder Screen .....................44Audio and Visual (TBD) 45Games and Apps (TBD) 46Call Records (TBD) 47Tools (TBD) 48Accessories (TBD) 49Authorized Accessories........................49U.S. FDA’s Consumer Update 50Warranty and Service 55NEC 535 Wireless Phone ......................55Limited Warranty..........................55NEC Authorized Accessories .....................58Limited Warranty..........................58NEC Customer Service Support ...................60CTIA 62iii
iv
NEC 535Welcome to the NEC 535 wireless phone.Your NEC 535 wireless phone is equipped with a battery, SIM card, hands-free headset, and a charger. Other accessory optionscan customize your phone for greater performance and mobility. To purchase optional accessories, contact your wireless serviceprovider or contact NEC customer Care Center at 1-800-637-5917.Wireless System StructureEvery time you use your wireless phone, different organizations are involved:All the 535 features described in this user guide are supported by your phone. However, for all these features to work, you musthave a SIM card (main piece that the whole phone functions on; included in the box supplied by your Service Provider) that alsosupports these features. Even if you have a fully featured SIM card, any feature will not work if it is not supported by the Networktransmitting your call. This last point is especially important when you are roaming among networks.User Guide ConventionsThe user guide legends direct your attention to specific information. The user guide legends are:*This is a set of paragraphs containing instructions. Follow the directions in the sequential order provided in the user guide.LThis type of paragraph contains details of where to find related information to the topic being explained.OThis type of paragraph contains information worth noting and is provided in the right column.IThis type of paragraph contains important information.The people that supplyyour SIM card and billsServiceProviderThe people thattransmit your callsNetwork ProviderThe people thatprovide your mMode servicesContent ProviderThe people thatmake your phone1
User Guide InstructionsThe instructions for all tasks and phone functions start at the Idle screen (see page ) unless instructed otherwise. Theseinstructions make use of shortcut selections except for special cases.The instruction “press” means to press a key or button for one second or less.The instruction “press and HOLD”means to press and hold a key for two to three seconds.The instruction “highlight” means to press the appropriate navigation keys to move the highlight bar over a desired option or item.The instruction “scroll” and “scroll to” means to press the Down navigation key to show more selections one at a time on a menuor screen. Press and HOLD the Up or Down navigation key to scroll a page at a time, instead of one item at a time.The instruction “highlight and select” means to press the appropriate navigation keys to move the highlight bar over a desired itemand pressing the Select button to confirm your choice and advance to the next screen of the selected item.Keypad Phone ControlsThe following table provides the wording used for the key names of the phone controls on the keypad.Key Name WordingSoftkey 1 Softkey 1Softkey 2 Softkey 2Menu MENUSend SENDPhonebook BOOKEnd/On-Off ENDSelect/Save SelectLeft, Right Left,RightUp, Down Up,DownClear/Back CLR2
Phone ControlsAt the Idle screen, press Softkey 1 to access Messages; press Softkey 2 to access mModeTM .Softkey 1 and Softkey 2 functions change according to the phone’s current use. Softkey 1 function displays on the bottom, leftcorner of the graphic display screen. Softkey 2 function displays on the bottom, right corner of the graphic display screen. Softkey1 is located on the upper left of the round shape with the navigation keys on the keypad. Softkey 2 is located on the upper right ofthe round shape with the navigation keys on the keypad.When an Options menu is available for the displayed screen, the Options Menu icon (an “M”) displays between the two softkeybuttons on the bottom of the graphic display screen. The Options menu key is located on the bottom left of the round shape withthe navigation keys.The Phonebook key is located on the bottom right of the round shape with the navigation keys and is used to display aphonebook.The Select key is located in the center of the round shape with thenavigation keys. The Select key is used to select highlighted itemsor tools. It is also used to save selections and changes.The navigation keys (Up,Down,Left, and Right) are located onthe outer edge of the round shape. Press the corresponding part ofthe 4 way navigation key to move the cursor, scroll, cycle, orhighlight. Navigation keys are also used as keypad shortcuts toaccess a specific menu or list. Refer to page for more keypadshortcuts information.The Send key is used to dial and send calls. The Send key islocated above the digit 1 key.The Clear key is used to remove a character or letter in the textentry screen and clear the present screen to return (go back) to theprevious screen. The Clear key is located above the digit 2 ABCkey.The End/On-Off key is used to turn the wireless phone On, turn itOff, terminate a phone call, and end current screen activity orapplication to return to the Idle screen. End/On-Off key is locatedon the right side of the keypad, above the digit 3 DEF key.Softkey 1 Softkey 2MenuPhonebookSelect Button Navigation Keys(Up, Down,Left, and Right)SendClear/BackEnd/On-OffSelect Button3
Parts and Functions4
Display InformationIThe LCDs on your phone use high-precision technology. Even so, the LCDs may contain pixels (dote) that fail tolight or remain permanently lit. Note that this is normal and does not indicate a problem with your display.Check box and Radio ButtonsA check box enables/disables a feature or option. Multiple check boxes can be selected at the same time. Selecting a radio buttonoption automatically cancels the previous selection, so only one radio button can be selected at one time. To select or cancel acheck box or radio button, highlight and select the option.5
LCD and Displayed Icons6
7
Main MenuThe menu structure begins with the Main Menu icons for top level options. To access a menu option:*Press MENU to access the Main Menu and press the option number 1through 8or highlight and select the desired option.8
Sub-Menus and Options MenuA sub-menu list displays for the selected Main Menu option. The sub-menu options are shown in the table on the previous page.Press the sub-menu option number or highlight and select the desired sub-menu option. You may also highlight the desired optionand Right navigation key to advance to the next sub-menu. A scroll bar displays on the side of the display screen when moreselections are below the ones shown on the display screen.An options menu provides additional options for an application function. The Options Menu icon displays between the two softkeyindicators on the bottom of the Main LCD. Within an application, press MENU to display the available options menu.Menu Shortcut SelectionAn alternative ‘shortcut’ method of selection allows you to jump straight to a menu or function without highlighting an icon andscrolling through the sub-menu options. The selections are made by pressing numbers on the keypad that relate to the displayedmenu options.Shortcut Selection ExampleUse the shortcut selection method to set Any Answer Key feature On as follows:*Press MENU (Main),1,1,3,and 2. The any key answer option is set and return to the previous menu.9
Keypad ShortcutsThe following shortcuts are available from the Idle screen.Key Name Press Key To Press and HOLD Key ToSoftkey 1 Access Mail screen Access Message InboxSoftkey 2 Access mMode screen Access JavaTM applicationsMENU Access Main Menu or Options menu Set the Side key lockBOOK Access phone book list Access Message screenSelect Access camera view finder screen Access video camera view finder screenUp Access phone modes screen Set phone mode to Meeting modeDown Access My data screen Access voice recall (voice memo)Left Access received calls list –Right Access missed calls list –SEND Access dialed calls list –CLR Delete a character or return to previous screen Delete all characters when entering textEND End a call or return to the Idle screen Power phone off and power phone on1 Enter phone number digit 1 Call Voice Mail center2-9 Enter phone number digits 2 to 9 Go to corresponding number in SIM phonebook0Enter phone number digit 0 Enter + symbol when you make an international call#Enter # symbol Enter a pause*Enter * symbol Switch ALS Line1/2ormute and retrieve sound during a call10
Main Phone FeaturesThe 535 phone can be used almost anywhere in the world with tri-band operation (GSM 850/1800/190 bands). Your phone hasthe following features:lGames (user may delete)l2 Softkeysl7-Color LEDl20 Voice memos (20 second recording time per memo)l10 Voice Recognition Tagsl800 mAh Lithium-ion BatterylAlternate Line Service (ALS) compatibility*lCalculatorlCamera and video cameralColor ID alert and vibrate modelCurrency converterlDate, Time & AlarmlDownload graphics, phonebook pictures and ring tuneslEmaillInternet EnabledlIR interfacelJAVAlMain LCD screen, 2.2 inch, 216 (height) by 162 (width)pixels with 65,536 color displaylMessaging (MMS/SMS)lMulti-media Messaging Service (MMS)lShort Messaging Service (SMS)lMulti-party call capability (conference calling)lOne-button Internet access (mMode)lOrganize your life with SyncML functionality (synchronizesPhone book, ToDo’s, and Scheduler/Calendar)lContactslScheduler/Calendar eventslToDo taskslPersonalize your phone with down-loadable contentl40-layer polyphonic ring tuneslWallpaperslPicture caller-id (10)lPhone mode operation (Normal, Meeting, Pocket, and Car)lPhone book (can store up to 500 records)lSecond LCD screen, 1 inch, 108 (height) by 80 (width)pixels with 4,096 color displaylSIM memory phonebook (store up to 250 records,depending on SIM capacity)lT9™ Text InputlUSB interfacelVoice mail* Alternate Line Service (ALS) is having 2 phone numbers. The digit 1 displays with icons that represent ALS 1. The digit 2displays with icons that represent ALS 2. ALS feature is available if provided by your network service provider.11
Safety and PerformanceFully charge the phone’s battery before you use your new wireless phone (see page 25 for the first time charging instructions).User CautionPhone settings should be adjusted to suit the likes and preferences of the individual user. Users sensitive to loud noises or suddenalarms should take care not to use or set the phone in any manner that may result in the user being unduly alarmed.For example, users with heart problems or heightened sensitivity to noise should adjust the wireless phone to a volume settingthat is within his or her range of comfort. If you believe the wireless phone causes you any adverse reaction, you shoulddiscontinue using the phone immediately.Emergency ServicesEnsure your wireless phone is turned On, the battery is properly charged, and the network connection signal strength level isadequate before attempting an emergency call. If your battery is empty, you can not make or receive any calls, includingemergency calls. Emergency calls are possible without service activation or a SIM card by pressing Softkey 1 (SOS).To make an emergency call in the United States,*Press END key to return to the Idle screen if needed.Input 911 (or other designated emergency number).Press the SEND key. (Your location and caller ID is delivered to the emergency operator as required by FCC guidelines.)Follow instructions received and do not end the emergency call until told to do so.Ask the operator for the service you require: Police, Ambulance, Fire, Coastguard or Mountain Rescue Services. Give your position andaccurate and necessary information. If possible, remain stationary to maintain contact. Do not terminate the call until given permission todo so.OFind out what the designated emergency number is for the area that you are within when traveling outside the United States.The 911 emergency number service is available on every digital network service while in the United States. Designatedemergency numbers can only be used with a valid SIM.ODue to the nature of the wireless system, the connection of emergency calls cannot be guaranteed. Never rely solely on awireless phone for essential communications such as medical emergencies.OWhen the SIM card is not inserted or when the dial lock function is on, just press the Softkey 1 (SOS).12
SafetyPrior to operating your wireless phone, please read this manual thoroughly, including the care and safety information. Observe thefollowing guidelines for safe and efficient operation of the phone.General CareA wireless phone contains delicate electronic circuitry, magnets, and battery systems. You should treat it with care and giveparticular attention to the following points.lDo not allow the phone or its accessories to come into contact with liquid or moisture at any time.lDo not place anything in the folded phone.lDo not expose your phone to extreme high or low temperatures.lDo not leave your phonelDo not expose your phone to direct flame, cigars or cigarettes.lDo not paint your phone.lDo not drop or subject your phone to abusive treatment.lDo not place the phone near or against computer diskettes, credit cards, travel cards and other magnetic media. Theinformation contained on disks or cards may be affected by the phone.lDo not remove the phone’s battery while the phone is turned On.lDo not allow children to play with the phone; it is not a toy.lDo not sit on your phone with it in a skirt or pants pocket and do not place heavy objects on top of the phone at any timewhere it may be subjected to heave weight or pressure. Doing so may damage to the LCD and camera lens and cause themto malfunction.lDo not attempt to disassemble the phone or any of its accessories. For repair, contact an NEC qualified repair center.lUse only a damp or anti-static cloth to clean the phone. Do NOT use a dry cloth, a saturated wet-cloth, or electrostaticallycharged cloth. Do not use chemical or abrasive cleaners as these may damage the case.13
General SafetylThe earpiece and phone may become warm during normal use. The unit itself may become warm during charging and use.lPut only the headset’s earpiece covered with foam in your ear. Do not put any other part of the headset in your ears.lObserve ‘Turn off 2-way radio’ signs, such as those near gas stations, chemicals or explosives.lA small rubber plug (for hands free socket protection) is included in the carton. Keep this out of reach of small children forwhom it could be a choking hazard.lDo not allow children to play with the phone, battery charger, batteries or SIM card.lThe operation of some medical electronic devices (such as hearing aids, cardiac pacemakers, and other implanted equipment)may be affected if a wireless phone is used next or near to them. Observe any warning signs and manufacturer’srecommendations.lDo not place the wireless phone on or near high heat items (e.g., candles, appliances that generate heat, etc.) or areas (e.g.,fireplace, stoves, etc.) when the wireless phone is in vibrate mode. The vibration could cause the phone to move into the highheat and cause a hazard.lUsing any battery pack, AC adapter, or vehicle power adapter not specified by the manufacturer for use with the 535 wirelessphone may create a potential safety hazard.lTake care not to hold the Light too close to your eyes or other people’s eyes when the Light is on.lDo not aim or direct the InfraRed (IR) data port towards your eyes or other people’s eyes when using the IR data exchange.lThe wireless phone contains metal, which may cause a rash, itching, eczema, inflammation, or other skin conditions to appearif the person has metal allergies.lTurn off your phone in any facility where posted notices require you to do so.OWhen in hazardous areas, turn off the phone. The wireless phone can still be a hazard in these areas even when set invibrate mode.ORemember to recycle: the cardboard packaging supplied with this phone is ideal for recycling.14
Radio Frequency (RF) SignalsTHIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless phone contains a radio transmitter and receiver. Your NEC phone is designed and manufactured not to exceed theemission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the generalpopulation. The guidelines are based on standards that were developed by independent scientific organizations through periodicand thorough evaluation of scientific studies.The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR).The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCCwith the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at thehighest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This isbecause the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. Ingeneral, the closer you are to a wireless base station antenna, the lower the output.Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limitestablished by the government-adopted requirement for safe exposure. The tests are performed on position and locations (forexample, at the ear and worn on the body) as required by FCC for each model. The highest SAR value for this model phone asreported to the FCC when tested for use at the ear is (0.56) W/kg, and when worn on the body, is (0.26) W/kg. (Body-wornmeasurements differ among phone models, depending upon available accessories and FCC requirements). While there may bedifferences between the SAR levels of various phones and at various positions, they all meet the government requirement.The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliancewith the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under theDisplay Grant section at http://www.fcc.gov/oet/fcid after search on FCC ID A98-KMP6J1L1-9.For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with a NECaccessory designated for this product or when used with an accessory that contains no metal and that positions the handset aminimum of 1.5 cm from the body.*In the United States, the SAR limit for wireless mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gramof tissue. SAR values may vary depending upon national reporting requirements and the network band.15
Aircraft SafetyThe use of wireless phones in aircraft may be dangerous to the operation of the aircraft and may be illegal. Any use of a wirelessphone on board an aircraft must be in accordance with applicable regulations. Follow all flight crew instructions. When instructedto turn off your wireless telephone, do so.Road SafetyCheck the laws and regulations concerning the use of wireless telephones and their accessories in the areas where you drive andalways obey them. If you find it necessary to use your cellular telephone behind the wheel of a car, please:lGive full attention to driving and exercise proper control of your vehicle at all times.lObserve all the recommendations contained in your local traffic safety documentation.lPull off the road and park before making or answering a call, if driving conditions so require.lTurn off your wireless phone at a refueling point, such as a gas station, even if you are not refueling your own car. Thewireless phone can still be a hazard in these areas even when set in vibrate mode.lDo not store or carry flammable or explosive materials in the same compartment as a wireless phone.OUse hands-free operation, if available, when driving.Vehicles Equipped with an Air BagAn air bag inflates with great force. Do not place objects, including either installed or portable wireless equipment, in the area overthe air bag or in the air bag deployment area. If wireless equipment is improperly installed in the vehicle and the air bag inflates,serious injury could result.Blasting Areas And Explosive AtmospheresTo avoid interfering with blasting operations, turn Off your phone when in a blasting area or areas posted: “Turn Off Two-WayRadio.” Obey all signs and instructions.Turn Off your phone prior to entering any area with a potentially explosive atmosphere, and obey all signs and instructions. Do notremove, install, or change batteries in such areas. Sparks in such areas could cause an explosion or fire resulting in bodily injuryor even death.Areas with a potentially explosive atmosphere are often, but not always, clearly marked. These include fueling areas such asgasoline stations; below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (sucha propane or butane); areas where oxygen is used; areas where the air contains chemicals or particles such as grain, dust, ormetal powders; and any other area where you would normally be advised to turned Off your vehicle engine.16
Electromagnetic InterferenceMost modern electronic equipment is shielded from radio frequency (RF) signals; however, certain electronic equipment may notbe shielded against the RF signals from your wireless phone.PacemakersThe Health Industry Manufacturers Association recommends a minimum separation of six inches (or 15 cm) be maintainedbetween a handheld wireless phone and a pacemaker. These recommendations are consistent with the independent research andrecommendations by Wireless Technology Research. Persons with cardiac pacemakers:lShould ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned On.lShould not carry the phone in a breast pocket.lShould place the phone to the ear opposite the pacemaker to minimize the potential for interference.lTurn Off your phone immediately and remove the battery if you have any reason to suspect RF interference,Whether the phone vibrates, plays a ring tune, or the volume buttons increase/decrease the ring sound, a received call to awireless phone may interfere with a cardiac pacemaker.Hearing AidsDigital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult yourwireless service provider.Other Medical Devices and Medical FacilitiesOperation of wireless phones could interfere with medical devices or implanted equipment which are inadequately shielded fromexternal RF energy. Consult a physician or the manufacturer of the medical device to determine if such devices are adequatelyshielded.Turn Off your phone in health care facilities, if regulations posted in these areas instruct you to do so. Hospitals or health carefacilities may be using equipment that could be sensitive to external RF energy.VehiclesElectronic vehicle systems, such as anti-lock brakes, speed control and fuel injection systems are not normally affected by radiotransmissions. RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Themanufacturer of such equipment can advise if it is adequately shielded from radio transmissions. If you suspect vehicle problemscaused by radio transmissions, consult vehicle manufacturer or its representative regarding your vehicle and do not turn On yourphone until it has been checked by qualified approved installers. You should consult the manufacturer of any equipment that hasbeen added to your vehicle.17
Battery Care and DisposalDo not leave the phone or the battery in places where the temperature could exceed 140 °F, i.e., on a car dashboard, on awindow sill, in direct sunlight, etc.Do not allow metal objects, such as coins or key rings, to contact or short-circuit the battery terminals.Do not put your phone’s battery in your mouth as battery electrolytes may be toxic, if swallowed.Do not leave the battery pack empty or disconnected for a long period of time.Do not dispose of battery packs in a fire.Keep the battery away from children. It is not a toy and it could be a choking hazard.Your phone battery is a sealed unit with no serviceable parts inside; do not attempt to open the battery covering.Use only a battery approved by NEC for the NEC 535 wireless phone.Using any battery pack or AC adapter not specified by NEC for use with the NEC 535 may be dangerous and may invalidate anywarranty and approval given to the wireless phone. Do not connect more than one charger at any time.To ensure the maximum life from your battery, allow the battery to fully discharge at least once a week. To fully discharge thebattery, leave the phone turned on until the message “RECHARGE BATTERY” is displayed and the phone shuts itself Off. If leftunused, a fully charged battery discharges in approximately one month. Store batteries uncharged in a cool, dark, and dry place.Batteries must be recycled or disposed of properly. Through the AT&T Wireless Reuse and Recycle program, consumers areinvited to bring unwanted phones, accessories, and batteries (regardless of the manufacture or carrier) to an AT&T Wireless retailstore for recycling. Use the website link “http://www.attwireless.com/general/storelocator” to find the nearest AT&T Wireless storeto you.18
PerformanceThird Party EquipmentUse only batteries, chargers, and authentic accessories approved by NEC. Modifications, the use of third party equipment, cables,or accessories that are not made or AUTHORIZED by NEC may invalidate any approval or warranty of your phone, may adverselyaffect the phone’s operation, and may be dangerous. For availability of approved accessories, check with your wireless phonedealer. Look for the NEC Authentic AccessoriesTM logo to know if the item has been approved by NEC for use with the NEC 535.ServiceThe wireless phone, batteries and charger do not contain user-serviceable parts. We recommend that your NEC wireless phonebe serviced or repaired by an NEC AUTHORIZED service center. Please contact your Service Provider or NEC at 1-800-637-5917if you believe that you require service. Any unauthorized service may invalidate the warranty of your wireless phone.Efficient UseFor optimum performance with minimum power consumption, hold your NEC 535 wireless phone (with the flip open) as you wouldany other phone and speak directly into the mouthpiece.BatteryThe NEC 535 phone contains an 700 mAh standard Lithium-ion battery. Battery performance depends on your location within thenetwork, signal strength, network configuration, the frequency at which your location is updated, the type of SIM in the phone, thephone features selected, battery age and condition, battery charging habits, temperatures to which the battery is exposed, cellbroadcast messages, the use of Full Rate or Enhanced Full Rate speech, as well as other factors.The battery is not fully charged when you buy your wireless phone but there may be enough power in the battery to turn thewireless phone on. Charge the battery by following the procedures on the page 23.AntennaYour phone has an internal antenna located at the base of the phone below the keypad. As with any other radio transmittingdevice, avoid touching the antenna area when the phone is turned On to optimize the antenna performance and talk time of thephone. Contact with the antenna area may affect call quality and may cause the phone to operate at a higher power level thanotherwise needed.19
LicensesT9TM Text Input and the T9 logo are registered trademarks of Tegic Communication. T9 Text Input is licensed under one or moreof the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, 6,011,554; and 6,307,548; Australia Pat number727539; Canadian Pat. Number 1,331,057; United Kingdom Pat. Number 2238414B; Hong Kong Standard Pat. NumberHK0940329; Republic of Singapore Pat.No. 51383; Euro Pat. Number 0 842 463 (96927260.8) DE/DK, FI, FR, IT, NL, PT, ES,SE, GB; Republic of Korea Pat Nos. KR201211B1 and KR226206B1; and additional patents are pending worldwide.USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED,EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION ENCODED BY A CONSUMER FOR PERSONALAND NON-COMMERCIAL USE WITHOUT REMUNERATION; (B) DATA OR INFORMATION (i) GENERATED BY ANDOBTAINED WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii)FOR PERSONAL USE ONLY; AND (C) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C.Helvetica is a registered Trademark of Heidelberger Druckmaschinen AG which may be registered in certain jurisdictions.Powered by Mascot Capsule®/Micro3D Edition™.The James Bond Theme by Monty Norman © EMI Unart Catalog Inc. (BMI) All Right Reserved. International Copyright Secured.Used by permission.Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc in the U.S. andother countries.This product contains ACCESS Co., LTD’s Compact NetFront™ Plus internet browser software. Copyright © 1998-2004 ACCESSCO., LTD. Compact NetFront™ is a registered trademark or trademark of ACCESS CO., LTD in Japan and selected countriesworldwide.This product contains ACCESS CO., LTD’s JV-Lite2™ J, Compact NetFront P. Copyright © 2000-2004 ACCESS CO., LTD.JV-Lite2™ is a registered trade mark or trademark of ACCESS COl, LTD, in Japan and selected countries world wide.This product contains ACCESS CO., LTD’s IrFront® Infrared communication software. Copyright ©1996-2004 ACCESS CO.,LTD.mMode and mMode logos are trademarks or registered trademarks of AT&T.Copyright © 2002 Music Airport Inc., http://www.music-airport .com.Copyright © Yamaha Corporation, http://www.yamaha.com.Copyright © ART, http://www.artcomp.com.Copyright © SyncML and SyncLite (synchronization software)of Puma Tech.20
Getting Started (TBD)Before you try to use your phone, check that you have:lNEC Authentic AccessoriesTM (see page 49)lA valid SIM card inserted in the phone (see page 22)lThe battery fully charged (see page 26)Service ActivationBefore you can use your new NEC wireless phone, the service must be activated by a wireless service provider. Please contactyour local wireless service provider for any questions regarding phone activation.Voice Mail and Text MessagingVoice mail and text messaging services, when available, are provided by your wireless service provider. Before you can receiveeither voice or text messages with your wireless phone, you must subscribe to these options through your wireless serviceprovider. Contact your wireless service provider for information on availability and setup of these services.PIN and Security CodesWhen your service is activated, a PIN and PIN2 (Personal Identification Number) are provided and programmed into the SIM card.Check with your wireless service provider for additional information regarding your security codes and passwords.Use the PIN to lock and unlock the SIM card to help prevent unauthorized use of the SIM card. Use the PIN2 to access the FDNphonebook.You may want to set up your own security code. Use the security code to lock and unlock the phone, lock access to the Internet,and restrict access to the PIM (Personal Information Manager) application data. The default security code is ‘0000’ until youchange it to a personal security code.A Security Code screen displays and requires entry of your PIN when the SIM PIN setting is locked and the phone is powered-on.A Security Code screen displays and requires entry of your PIN2 when adding, editing, deleting, copying any phone entries in or tothe FDN phonebook.A Security Code screen displays and requires entry of your security code when you attempt to access features or functions thatyou have locked.OFDN is a network service provider dependent feature.21
SIM CardBefore using your wireless phone you must register with a wireless network service provider to receive a SIM (Subscriber IdentityModule). The SIM card contains a computer chip that stores and tracks your phone number, the services included in yoursubscription, and your SIM phonebook information. It is stored in a recess in the battery compartment.The phone can not be used (except for emergency calls) until a valid SIM is inserted. It is possible to transfer your SIM to anothercompatible phone and access your network services.If the SIM is already inserted, see Powering On the Phone, page 26.Inserting a SIM Card*Make sure that the power is Off and remove the battery.Release the battery lock in the direction of arrow (1). Lift the battery up in the direction of arrow (2) and remove it to revealthe SIM location.Place the straight end of SIM card with the metal part facing down.Carefully move to slide the SIM card lock in the direction of arrow (3) and push the SIM card in the direction of arrow (4) toplace the SIM card under the lock. Make sure the SIM is fully inserted.To replace the battery, place the bottom of the battery into position. Lower the battery until it clicks into place.22
IBe sure to turn the phone off before inserting and removing a SIM card. Otherwise damage to the SIM card canoccur.INever pull the SIM card lock upward. Doing so may break the lock.IIf the SIM card is not fully inserted when the battery is replaced, damage to the SIM card can occur.IIf the phone, or the SIM, is lost or stolen then you should contact your Service Provider immediately in order toprevent unauthorized use.OA message displays if any locks have been set, the wrong SIM has been inserted, or the SIM has been inserted improperly..Please follow any instructions given, e.g., ‘Return to Service Center’.ODo not bend or scratch your SIM card.OThe phone supports a number of languages and the keyboard symbols have been chosen for world-wide operation.OThe digital technology of your phone helps to ensure that your conversations are kept secure.OThe SIM card contains personal data such as your electronic phonebook, messages, and also details of the network servicesyou have subscribed to.Removing a SIM Card*Remove the battery and lightly holding down the SIM card, slide the SIM card lock in the direction of arrow (3) and removethe SIM card.OThe SIM card may pop out when you release the SIM card lock. Be careful not to drop it.23
Charging the BatteryYour phone is powered by a rechargeable battery. A new phone battery must be fully charged before using your wireless phonethe first time. Charge the battery by using the charger supplied with your wireless phone. When the battery is fully charged, a fullbattery power level icon will be displayed.Before trying to use your phone, ensure the SIM card is inserted and the battery is in place on the phone.*Connect the NEC battery charger (AC adapter) supplied with your phone to a compatible power outlet.Connect the charger plug into the connector at the side of the phone.If your phone is turned on, a message will display on the 2nd-LCD. The LED will glowred while charging. When charging is complete, the LED will turn off.To fully charge the battery, leave the phone charging until the 2nd-LCD displays a fullbattery icon and LED turns off.If you need to receive calls, the wireless phone can be turned On and left in Idle while it ischarging, although the total time takes longer to charge.IUsing any battery pack, AC adapter, vehicle power adapter (optional) or desktopcharger (optional) not specified by NEC for use with this phone can bedangerous and may invalidate any warranty and approval given to the wirelessphone.IDo not connect more than one charger at any time and do not leave the chargerconnected to the power outlet when it is not in use.IDO NOT connect a charger or any other external DC source if the phone'sbattery is not inserted. If this happens, the phone may not function properly.IDo not try to charge the battery if the room temperature is below 5°C (41°F) or above 35°C (95°F).OCharging takes approximately 3 hours with your phone turned off.OIf you use the phone while charging, handle the phone carefully since the cable or adapter is connected.OWhen a battery is brand new or completely discharged, there could be a few minutes delay before the charging indicatorilluminates. This is not an abnormal occurrence.24
BatteryBattery performance for standby and talk times depend on how you use your phone and the choices made by the networkoperator. In particular, your location within the network, signal strength, network configuration, the frequency at which yourlocation is updated, the type of SIM in the phone, the phone features selected, battery age and condition, battery charging habits,temperatures to which the battery is exposed, cell broadcast messages, the use of Full Rate or Enhanced Full Rate speech, aswell as other factors, will affect both standby and talk times..The battery is not fully charged when you buy your wireless phone but there may be enough power in the battery to turn thewireless phone on.The battery can also be charged whenever you wish without affecting the performance of the wireless phone.To ensure the maximum life from your battery, allow the battery to fully discharge at least once a week. To fully discharge thebattery, leave the phone turned on until the recharge image is displayed and the phone shuts itself off.OThe 535 automatically switches off if the battery voltage is too low.OBatteries have a life cycle. If the battery does not last as long as it used to, the battery life may be coming to an end. Replacethe battery with a new one of the same type.OWhen not using the battery for a long period, remove it from the 611 and store in a place with low humidity and lowtemperature.IWhen removing or changing the battery, make sure the phone is turned off. Some settings, stored numbers, andmessages may be lost if the battery is removed while the power is On.Checking the BatteryThe battery charge indicator shows the approximate charge level of the battery while the phone is in use and not being charged.The blocks on the display show the charge of your battery pack. The empty battery icon displays when the battery is nearly emptywith approximately one minute of talk time remaining.Full battery power Low battery power Battery empty (red)*Check the icon at the top, left corner of the screen.25
Low Battery AlarmWhen the battery voltage falls below the working level, RECHARGE BATTERY appears on the main display area and an emptybattery icon displays in the status bar. With the recharge notification, the phone also sounds a short tone at ten-second intervals.Once the recharge message displays and the short tone sounds, the phone battery has approximately one minute of useremaining. The phone automatically powers Off.IIMPORTANT BATTERY CHARGING INFORMATION (Charging a very low battery)The battery’s charge continues to drop after the low battery warning is displayed. In extreme cases where thebattery is left uncharged for some considerable time after this warning, a trickle charge is used to slowly bring thebattery back up to the safe level at which the fast charging can begin. The phone can be in trickle charge for a fewminutes before the fast charging starts.During trickle charge, the battery icon will show charging but you are not able to make or receive a call, or fully power On thephone. Normal wireless phone operation resumes once fast charging begins. The phone can be in trickle charge for a few hoursbefore fast charging starts if the battery is left uncharged for some days after the recharge warning.Changing the Battery*Release the battery lock in the direction of arrow (1), and then lift the battery up in the direction of arrow (2) to remove it.Put the new battery, release the battery lock in the direction of arrow (3).Place the battery with the terminal end towards the hinged end of the phone and lower the battery into the batterycompartment until it clicks into place (4).26
Powering-On the PhoneTurning the Phone On*Press and HOLD END to turn on the phone.After the powering on process, the screen displays the selected greeting and then displays theIdle screen.If you receive a prompt for your PIN code or security code, input the necessary code using thekeypad (refer to page 21).Turning the Phone Off*Press and HOLD END until it powers down.The power down screen displays the NEC High Definition Mobile graphic and the phone powersOff.After powering off or turning the wireless phone off, you must wait three seconds before powering on.ODo not remove the battery to turn your phone Off as this may cause loss of stored information.27
Basic Calls and Phone Use (TBD)Make a call the same way as you would with a normal phone, except you must press SEND after entering the area code andphone number to ensure the call is sent.Dialing Calls*Key in the phone number. Check the number on the display.Press SEND to connect the call.OIf you are dialing a call, the phone gives priority to receiving a call unless you have already pressed SEND.OThe digital technology of your NEC 535 wireless phone helps to ensure that your conversations are kept secure.While making the call, the screen displays the phone number dialed or the name stored in the phonebook and a connectiongraphic or a CLI picture that has been allocated to the number called (see page ).The number dialed and information related to the number dialed is stored in the dialed calls list. The last 20 calls made are stored.Each time you make a call after the dialed call list is full, the oldest call drops off the list and the newest call is placed at the top ofthe list.*Press SEND to access the dialed call list from the Idle screen.Correcting MistakesPress Left or Right navigation key to scroll through the number and place the cursor to the right of the incorrect number. PressCLR key to clear individual digits to the left of the cursor or hold the CLR key at least 2 seconds to delete the entire phone number.Press a number key and it is inserted at the cursor position.Ending CallsThere are 3 ways to end a call:*(1) Press END, (2) Press MENU (Options Menu) and 9to disconnect a call, or (3) Close your phone. The phone returns toIdle screen.OAlways press END or close your phone even if the other person has ended the call first.OIf END is held down, the wireless phone turns Off.28
Receiving CallsWhen someone calls your number (phone is powered On),lThe phone ringer sounds.lThe LED (located at the back of the flip cover) flashes. the specified color.lThe phone number of the person calling may display on the bottom, left of the screen if the caller ID feature is available andthe caller has activated the feature.lThe calling person’s number with a name and a picture (see page ) may display if you have the caller has a phone number,name, and a picture stored in the phonebook.If the caller has withheld their caller ID, the screen provides a message that the number is being withheld.OYou also have options for holding and forwarding calls. These options depend on your network and your subscriptionarrangements.Accepting a Call*Press SEND or Softkey 1 (Accept) to connect an incoming call.To use ring silencer or any key to accept a call, refer to page . However, if you already have a call in progress, pressing the anykey function does not apply. With a call in progress, you must press SEND or Softkey 1 (Accept) to answer an incoming call.OIf you already have 2 calls in progress (whether active, on hold, or multi-party), a third incoming call can not be acceptedbecause the Softkey 1 (Accept) will not be displayed on the incoming call screen.Rejecting a Call*Press (End/On-Off) or Softkey 2 (Reject) to reject or ignore the call. The call goes automatically to voice mail depending ifvoice mail is available by your service provider.ODo not press END to reject an incoming call if you already have 2 calls in progress.Pressing END with 2 calls in progress does not reject an incoming call but will disconnect a call in progress.If your phone receives a call and you do not answer it, the screen will display the phone number (or the name if stored) of thecaller (if available). This information is stored in the missed calls list. Up to 10 missed calls are stored in this list.OYou can set your phone to answer a call when any key is pressed. (See Any Key Answer on page ).29
Receiving a Call While in an ApplicationIf you receive a call while creating a new message, you can accept or reject the call. When you accept the call, the messagecloses so you may answer the call. The text entry for the message is saved and the message is saved in the Message centerDrafts folder.If you receive a call while you are in a PIM application (Personal Information Manager, for example entering a phone contact,calendar entry, or a ToDo task), you can accept or reject the call. When you accept the call, the application closes so that you mayanswer the call. If you accept a call during text entry or editing changes, the text entry and changes are not saved.If you receive a call while you are using the web browser, you can accept or reject the call. When you accept and end the call, theweb browser screen returns. You are still connected to the last website accessed.Using Features/Application During a CallThere are a number of features and tools that you may use during a call. The ones that you cannot use during a call are listed inthe following table:Phone Settings Screen Settings Calls Settings Reset SettingsNetwork Settings Clock Settings Other Settings Total CallsGames and Apps Camera Clock mModeVoice Mail Send Email Play Voice Mail SynchronizationAudio and Visual Send MMS Security SettingsUnsuccessful Calls/Auto RedialWith Auto redial set On, your phone will try up to 10 times to redial a number if the first attempt is not successful. If the call cannotbe connected, a tone is heard, the display shows an appropriate message, and the phone returns to Idle. The number isautomatically called again after a short delay. The phone will try up to 10 times to redial the number. The failure to connect a callcan be due to network problems or if the other phone is busy.*Press Softkey 2 (Cancel) to end a redial attempt.30
Call FeaturesCaller IDWhen you dial a call, you can send your own phone number to display on the dialed phone (see page ).When you receive a call, the caller’s phone number displays if the caller’s function for caller ID is set On or the caller’s phonenumber has been stored in your phonebook.Returning an Unanswered Phone CallIf your wireless phone receives a call and you do not answer it, the caller information is stored in the Missed calls list. To return anunanswered call:*Press END to display the Idle screen and press Right navigation key to display the Missed calls log or press MENU (Main),7, and 2to display the Missed calls log.Press Up or Down navigation key to highlight a missed call. Return the call using one of the 3 following ways.(1) Press (Send), (2) Press Softkey 1 (Call), or (3) Press MENU (Options Menu) and 1 to make the call from the Missed callsOption menu.Last Number RedialTo view and redial the last number you called:*Ensure the Idle screen is displayed and no phone number is shown. Press (Send) once. The last number you calleddisplays.Press SEND again. The last number you dialed is automatically called.If you remember the last call made, simply press SEND twice.Dialing a Number in Message TextTo call a phone number within the message text of a message at the Message view screen:*Press Right navigation key to highlight the phone number in the message text.Press MENU (Options Menu) and 2 to display the phone number in the dial edit screen. Press Softkey 1 (Call) to dial thephone number.31
Emergency Calls*Input 9,1, and 1. Press SEND to connect the call to local emergency services.OIn the United States of America, the emergency number is 911. On most networks, 911 emergency calls can be made withouta SIM card inserted.OEnsure your wireless phone is turned On, the battery is properly charged, and the network connection signal strength level isadequate before attempting an emergency call. If your battery is empty, you cannot make a call or any emergency callsSpeed DialingWith one-touch dialing,*Press and HOLD a number 2-9 (the numbers 2-9 correspond to the phonebook location number) to dial a number in SIM.OOne-touch dialing is available only for the phone numbers with the location number 2 to 9 stored in the phonebook (SIM).With fast dialing,*Press the number keys (1-500 corresponding to the phonebook location number in Phone, refer to page ) and (AsteriskSymbol) key to display an entry in Phone. Press SEND to dial the displayed number.Press the number keys (1-255 corresponding to the phonebook location number in SIM, refer to page ) and (NumberSymbol) key to display an entry in SIM. Press SEND to dial the displayed number.OIF FDN is enabled, speed dialing is available for FDN numbers only.Entering a Pause (for DTMF Dialing)A pause (P) may be entered in a number that allows the numbers before a pause to be dialed and connected before the numbersafter the pause are dialed. An example is a phone number with an extension number. The pause is placed between the phonenumber and the extension number.Do not enter a pause in an international number. Make sure the condition in Plus Dialing does not apply.*Input the phone number.Press and HOLD (at least two seconds) the (Number Symbol) key to insert a pause. The letter Pdisplays for the insertedpause.Input the numbers to be dialed after the pause.32
International DialingBefore you can enter a + symbol in a number, the cursor must be at the beginning of a number.To make international calls:*Press and HOLD 0to input the + symbol.Input the country, area code (without the leading zero) and phone number that you wish to call.When dialing, add the country code required. Storing all numbers with the country codes (e.g., 01 for the US, 44 for UK) is helpful.A country code for another country is always the same, no matter what country you are dialing from. For example, to make aninternational call to a typical UK number is entered as:International Access Country Code Area Code Phone Number+ 44 1189 123456Call your Service Provider to activate international service options.OThe ‘+” (plus) symbol for International access can be entered and used within phone numbers for speed dialing.Volume ControlsTo silence the ringer when receiving a call, the Ring silencer option must be set On.*(With flip CLOSED) Press a Side Volume button. Open the flip and press SEND to accept the call, and begin yourconversation.(With flip OPEN) Press Side Volume button and accept the callODo not press SEND,END,Softkey 1 or Softkey 2 if the Any Key Answer option is set on.To change the earpiece volume during a call:*The flip cover must be open and press the Side Volume buttons. Press the Side Volume Up (+) increase volume and SideVolume Down (-) to decrease volume.The Side Volume buttons may be used to increase or decrease ringer volume when the hands-free accessory is connected.During an incoming message, the Side Volume buttons adjust the ringer volume.During the clock’s daily alarm or Scheduler alarm, press a Side Volume button to silence the alarm, if the Ring silencer option isset.33
Voice MailThe voice mail message icon displays in the icon status bar to notify you of a new voice mail. The icon remains displayed until youaccess voice mail to listen to your message.*Press and HOLD 1at least two seconds to access your voice mail.Refer to the Messaging and Voice Mail section on page 41 for more voice mail information. Refer to Voice Mail settings on pageto set up your voice mail number.Forwarding CallsAll call types may be forwarded to a designated number or each call type may be forwarded to different designated numbers.Call forwarding is established in the Call settings sub-menu of Settings menu (see page ).When call forwarding is set on, unanswered calls are forwarded to the designated number.Call TimerDuring calls, the call timer displays the call duration on screen, incrementing the time in minutes and seconds until the call isended.The call timer display must be set to On (see page ).Using Call Features During a CallThe Call in progress screen displays during a call. The instructions for the following call features begin at the Call In Progressscreen.Placing a Call On HoldTo place a received or dialed call on hold from the Call in progress screen:*Press Softkey 1 (Hold) or press MENU (Options Menu) and 1to place a call on hold from the Phone function Options menu.Press Softkey 1 to retrieve the call.34
Call WaitingDuring a call, another received call is announced by a beep tone in the earpiece and an incoming message on the screen. To usecall waiting from the Call in progress screen when you hear the beep tone:*Press Softkey 1 to answer the new call and automatically place the current call on hold.Finish the conversation and press END to terminate the new call.Press Softkey 1 to retrieve the call on hold.Press Softkey 1 to switch between the two calls.To merge the two calls, press Softkey 2 (see Multi-party calls, on page ).Mute A CallTo mute a call using the Phone function Options menu from the Call in progress screen:*Press MENU (Options Menu) and 2or press and HOLD (Asterisk Symbol) key to mute the call.Press MENU (Options Menu) and 2or press and HOLD (Asterisk Symbol) key to un-mute a muted call.When a call is muted and you accept a received call, mute is automatically turned Off. The mute function is automatically releasedwhen a call is ended.DTMF TonesDual tone multi-frequency (DTMF) tones are used to send digital signals to over-the-phone automated services that allow accessto information or accounts, e.g., use a specific language, access to specific information, account number and password to financialaccounts, voice mail, etc. These DTMF tones may be annoying during multi-party calls. You can turn DTMF tone Off to beconsiderate so that the participants do not hear these tones when you input the number of another participant. The tones can onlybe sent when a call is connected.To turn DTMF tones Off from the Call in progress screen (during a phone call):*Press MENU (Options Menu) , 7, and 2.To turn DTMF tones On:*Press MENU (Options Menu) , 7, and 1.35
Conference CallsIf your SIM card is multi-party enabled (the Network supports conference calling), you can make a conference call to more thanone caller. The 3-way and up to 6-way conference call depends on the network service provider. Extra fees may apply forconference calls.The associated parties will hear the DTMF tones while you dial another person to add to the conference. Use the instructions inthe previous topic to turn Off the DTMF tones. When the call is being dialed, the associated parties of the multi-party call areplaced on hold and cannot hear the conversation until the new caller is added to the conference call.You can leave the conference call while the remaining participants carry on with the call.A multi-party call is considered as one call in progress.Receiving Second Call*Press Softkey 1 to place the first call on hold.Press Softkey 1 to accept the second call.Press Softkey 2 to merge both calls.Making a Second Call*Press Softkey 1 to place the first call on hold.Input a phone number and press Softkey 1 to make the second call. If the call is successful, the Call in progress screendisplays showing the first call with on hold status and the highlighted second call with connected status.Press Softkey 2 to merge both calls.To continue adding a third, fourth, and fifth party to conference calling (if Network supported), repeat the steps of Making aSecond Call.OIf you already have 2 calls in progress (whether active, on hold, or multi-party), a third incoming call can not be acceptedbecause the Softkey 1 (Accept) will not be displayed on the incoming call screen.Do not press (End/On-Off) to reject an incoming call if you already have 2 calls in progress.Pressing (End/On-Off) with 2 calls in progress does not reject an incoming call but will disconnect a call in progress.36
If adding a call to conference calling is unsuccessful, the failure screen displays briefly and the phone returns to the previousstatus.Putting Calls on Hold*Press Softkey 1 to place both calls on hold.Press 2, 1 and SEND to place the first call on hold. Press 2, 2, and SEND to place the second call on hold.Private ConversationDuring a multi-party call, you can select one participant for a private conversation while the other participants continue theconference call.*Highlight the participant.Press MENU (Options Menu) and 6 to briefly display the busy screen for Private conversation and begin the privateconversation.Press END to end a private conversation and the call.To end the private conversation and add the party back to the multi-party call:*Press MENU (Options Menu) and 6. This combines the two calls back into a single multi-party call and all members areactive.Disconnecting a PartyDuring a multi-party call, you can disconnect one of the participants and continue the call with remaining participants from the Callin progress screen.*Highlight the participant to disconnect.Press MENU (Options Menu) and 9to disconnect the participant from the conference call or press 1, 2, and SEND todisconnect the second call or 1, 1, and SEND to disconnect the first call.OTwo calls are on the phone: the multi-party call and the active single call of the private conversation. The members of themulti-party call can still speak to each other on the one call while the private conversation is the other call.OPress END or Softkey 1 to end both calls.37
RoamingIYou will be charged for calls forwarded to you while roaming.The roaming feature enables you to use your phone in many parts of the world and pay all charges through your normal serviceprovider. Your network operator usually has agreements with named networks in other countries so that automatic roaming cantake place with these named networks. The phone also allows you to set network preferences of your own.OBefore leaving your home country, you should select any preferences such as bar calls or call forwarding.LRefer to Network Settings on page to select a different network or search for a new network.38
Personalizing Settings (TBD)To access the Settings menu:*Press MENU (Main) and 1to display the Settings menu or press MENU (Main), highlight, and select the Settings option 1.To select a Settings menu option:*Press the Settings option number (1through 8) or press highlight and select the desired Settings option.The current selected option for a setting is marked by a checkmark if the options are not numbered. If the options are numbered,the option number’s color is green to show the selected option for a setting.Remember to press CLR (Clear/Back) to return to the previous screen or press END to exit the screen and return to the Idlescreen.Phone SettingsThe Phone settings menu contains the settings for voice volume, phone modes, any key answer, ring silencer, volume key, ownnumber, and language.39
Text Entry (TBD)40
Messaging and Voice Mail (TBD)Accessing MessagesTo access the Message Center:*Press Softkey 1 (Message) or MENU (Main) and 2to display the Message center folder screen or press MENU (Main) andhighlight and select the Message center option 2.To select a Message center folder option:*Press the Message center option number (1through 8) or highlight and select the desired option.At message fields that require text entry, enter the first letter in the field and the text editor screen displays or press Select at ahighlighted field to display the text editor screen.41
Web Browser (TBD)To access mMode menu:*Press MENU (Main) and 3to display the mMode menu or press MENU (Main) and highlight and select the Web browseroption 3.To end the session on the Internet,*Press END key.The CLR key does not function as a back key or return to previous page in the web browser mode. When accessing the Internetor URL, press the CLR (Clear) key to end the process to connect to the Internet or URL.In the Softkey area (located at the bottom of the screen), navigation indicators (arrow points) display to show the directions thatyou may move the cursor, move the highlight bar, or scroll within the screen.42
Phonebook (TBD)To access Phonebook option of the main menu:*Press MENU (Main) and 4to display the Phone book menu and press the Phone book option number (1or 2)orPress BOOK to display a phonebook list orPress MENU (Main) and highlight and select the Phonebook option 4.Remember to press CLR key to return to the previous screen or press END to exit the screen and return to the Idle screen.OFDN and SDN are network provider dependent features.OFor emergency calls, ensure your wireless phone is turned On, battery is properly charged, and the network connectionsignal strength level is adequate before attempting an emergency call. If your battery is empty (see page 25), you can notmake or receive any calls, including emergency calls.43
Camera Function (TBD)Camera function allows you to take pictures and save as a JPEG file. You can enjoy the picture files in many ways: send itattached to an MMS message, set it as the wallpaper, etc.At the Idle screen, press Select to access the camera function; press and HOLD Select to access the video camera function.To access the camera functions from the Main Menu:Camera View Finder ScreenMain LCD as View Finder(Flip is open)44
Audio and Visual (TBD)Using Audio and Visual, you can display a picture or playback music on your wireless phone. The picture or music may bedownloaded from the Internet, received in an Email, or a received in an MMS message.To access Audio and Visual menu:*Press MENU (Main) and 6 to display Audio and Visual menu or press MENU (Main) and highlight and select the Audio andVisual option 6.To select an Audio and Visual option:*Press the Audio and Visual option number (1 through 3) or highlight and select the desired Audio and Visual option.Remember to press CLR key to return to the previous screen or press (End) to exit the screen and return to the Idle screen.45
Games and Apps (TBD)The applications and games contained in the Software list are downloaded from the Internet through the Web Browser. The lastloaded application or game appears at the top of the software list. The NEC 535 wireless phone is set with vibrate and tonecombination in order to play games that require both.To access mMode menu:*Press MENU (Main) and 7to display the Applications menu or press MENU (Main), highlight, and select the Games andApps option 7.To select an Applications menu option:*Press the Application option number (1through 3) or highlight and select the desired option.For the Application setting options, remember to press CLR to return to the previous screen or press (End) to exit the screen andreturn to the Idle screen. The Clear/Back key does not function as a back key or return to previous page in Games/Apps mode.In the Softkey area (located at the bottom of the screen), navigation indicators (arrow points) display to show the directions thatyou may move the cursor, move the highlight bar, or scroll within the screen.46
Call Records (TBD)47
Tools (TBD)To access Tools menu:*Press MENU (Main) and 8 to display the Tools menu or press MENU (Main), highlight, and select Tools option 8.To select a Applications option:*Press the Tools option number (1 through 8) or highlight and select the desired Tools option.Remember to press CLR (Clear/Back) key to return to the previous screen or press (End) to exit the screen and return to the Idlescreen.If the PIM lock is set On (refer to Security settings and Locks on page ), the security code entry screen displays each timeScheduler or ToDo are accessed. The security code entry screen also displays when private events/tasks or all events/tasks areselected even if PIM lock is set Off.48
Accessories (TBD)Authorized AccessoriesNEC recommends using only NEC Authentic AccessoriesTM with your wireless phone to ensure optimal quality performance. TheNEC authorized accessories include the following:Vehicle Power Adapter AC Adapter and Charger Unit* Hands-Free Headset*USB Synchronization Cable Battery** These accessories are in the wireless phone package.OLook for the NEC Authentic AccessoriesTM logo to know if the item has been approved by NEC for use with the NEC 535.OTo purchase NEC Authentic AccessoriesTM , please contact the NEC customer Care Center at 1-800-637-5917 in the UnitedStates.INot using NEC Authentic AccessoriesTM or not using NEC approved accessories with this phone creates a potentialsafety hazard that may be dangerous and may void any warranty and approval given to the wireless phone.IWARNING! The power cords of this product contain lead, a chemical known to the State of California to cause birthdefects or other reproductive harm. Wash hands after handling.49
U.S. FDA’s Consumer UpdateThe Food and Drug Administration’s (FDA) Center for Devices and Radiological Health Consumer Update on Wireless Phones.1. Do wireless phones pose a health hazard?The available scientific evidence does not show that any health problems are associated with using wireless phones. There is noproof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency energy (RF) in themicrowave range while being used. They also emit very low levels of RF when in the idle mode. Whereas high levels of RF canproduce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no knownadverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies havesuggested that some biological effects may occur, but such findings have not been confirmed by additional research. In somecases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.2. What is FDA’s role concerning the safety of wireless phones?Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they canbe sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones areshown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require themanufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazardno longer exists.Although the existing scientific data does not justify FDA regulatory actions at this time, FDA has urged the mobile phone industryto take a number of steps, including the following:lSupport needed research into possible biological effects of RF of the type emitted by mobile phones;lDesign mobile phones in a way that minimizes any RF exposure to the user that is not necessary for device function; andlCooperate in providing wireless phone users with the best possible information on what is known about possible effects ofwireless phone use on human health.FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of mobile phonesafety to ensure coordinated efforts at the federal level. These following agencies that belong to this working group are:lNational Institute for Occupational Safety and HealthlEnvironmental Protection AgencylFederal Communications Commission (FCC)lOccupational Safety and Health Administration (OSHA)lNational Telecommunications and Information AdministrationlThe National Institutes of Health participates in some interagency working group activities, as well.50
FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones thatare sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other healthagencies for safety questions about wireless phones.FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higherpower than do the wireless phones themselves, the RF exposures that people get from these base stations are typicallythousands of times lower than those they can get from wireless phones. Base stations are, thus, not the subject of the safetyquestions discussed herein.3. What kinds of phones are subject of this update?The term “wireless phone” refers here to hand-held wireless phones with built-in antennas, often called “cell,” “mobile,” or “PCS”phones. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the shortdistance between the phone and the user’s head. These RF exposures are limited by Federal Communications Commissionsafety guidelines that were developed with the advice of FDA and other federal health and safety agencies. When the phone islocated at greater distances from the user, the exposure to RF is drastically lower because a person’s RF exposure decreasesrapidly with increasing distance from the source. The so-called “cordless phones,” which have a base unit connected to thetelephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safetylimits.4. What are the results of the research done already?The research done thus far has produced conflicting results, and many studies have suffered from flaw in their research methods.Animal experiments investigating the effects of radio frequency energy (RF) exposures characteristic of wireless phones haveyielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested thatlow levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showedincreased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so asto be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to therefore for up to 22hours per day. These conditions are not similar to the condition under which people use wireless phones, so we don’t know withcertainty what the results of such studies mean for human health.Three large epidemiology studies have been published since December 2000. Between them, the studies investigated anypossible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma,tumor of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmfulhealth effects from wireless phone RF exposures. However, none of the studies can answer questions about long-term exposures,since the average period of phone use in these studies was around three years.51
5. What research is needed to decide whether RF exposure from wireless phones poses a health risk?A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some ofthe data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers ofanimals would be needed to provide reliable proof of a cancer promoting effect, if one exists. Epidemiological studies can providedata that is directly applicable to human populations, but 10 or more years’ follow-up may be needed to provide answers aboutsome health effects, such as cancer. This is because te interval between the time of exposure to a cancer-causing agent and thetime tumors develop - if they do - may be many years. The interpretation of epidemiological studies is hampered by difficulties inmeasuring actual RF exposure during dat-to-day use of wireless phones. Many factors affect this measurement, such as the angleat which the phone is held, or which model of phone is used.6. What is FDA doing to find out more about the possible health effects of wireless phone RF?FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that highpriority animal studies are conducted to address important questions about the effect of exposure to radio frequency energy (RF).FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since itsinception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that hasdriven the establishment of new research programs around the world. The Project has also helped develop a series of publicinformation documents on EMF issues.FDA and the Cellular Telecommunications and Internet Association (CTIA) have a formal Cooperative Research and DevelopmentAgreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from expertsin government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independentinvestigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will alsoinclude abroad assessment of additional research needs in the context of the latest research development around the world.7. How can I find out how much radio frequency energy exposure I can get by using my wireless phone?The Federal Communications Commission (FCC) requires that wireless phones sold in the United States demonstrate compliancewith human exposure limits adopted by FCC in 1996. The relative amount of RF energy absorbed in the head of a wirelesstelephone-user is given by he Specific Absorption Rate (SAR). The FCC requires wireless phones to comply with a SAR safetylimit of 1.6 watts per kilogram (1.6 W/kg).Information on SAR for phone models authorized since June 2, 2000, can be obtained by using the FCC identification (ID) numberfor that model. The FCC ID number is usually printed somewhere on the case of the phone, but it may be on the battery pack.Follow the directions to enter the FCC ID number and obtain the SAR information of “Grant of Equipment Authorization.” Grantsauthorized prior to 1998 are not part of the electronic database.52
Phones certified by the Cellular Telecommunications And Internet Association (CTIA) are required to provide SAR information toconsumers in the instructional materials that come with the phones.8. What has the FDA done to audit the radio frequency energy coming from wireless phones?After FCC grants permission for a particular cellular telephone to be marketed, FCC will occasionally conduct “post-grant” testingto determine whether the wireless phone conforms with FCC regulatory requirements. The most important post-grant test, from aconsumer’s perspective, is testing of the R emissions of the hone. FCC measures the Specific Absorption Rate (SAR) of thephone, following a very rigorous testing protocol. As is true for nearly any scientific measurement, there is a possibility that the testmeasurement may be less than or greater than the actual RF emitted by the phone. This difference between the RF testmeasurement and actual RF emission is because test measurements are limited by instrument accuracy because testmeasurement and actual use environments are different, and other variable factors. This inherent variability is known as“measurement uncertainty.” When FCC conducts post-grant testing of a wireless phone, FCC takes into account anymeasurement uncertainty to determine whether regulatory action is appropriate. This approach ensures that when FCC takesregulatory action, it will have a sound, defensible scientific basis.FDA scientific staff reviewed the methodology used by FC to measure wireless phone RF, and agreed it is an acceptableapproach.9. What steps can I take to reduce my exposure to radio frequency energy from my wireless phones?If there is a risk from these products—and at this point we do not know there is—it is probably very small. But if you are concernedabout avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF).Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone willreduce RF exposure.If you must conduct extended conversations by wireless phone every day, you could place more distance between your body andthe source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset andcarry the wireless phone away from your body or use a wireless phone connected to a remote antenna.Again, the scientific data does not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposurefrom these products, you can use measure like those described above to reduce your RF exposure from wireless phone use.10. What about children using wireless phones?The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to takesteps to lower exposure to radio frequency energy (RF), the measures described above would apply to children and teenagersusing wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF sourcewill reduce RF exposure.53
Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones atall. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000.They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation tolimit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazardexists.11. What about wireless phone interference with medical equipment?Radio frequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helpeddevelop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillatorsfrom wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement ofMedical Instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, wascompleted in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe fromwireless phone EMI.The FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standardsponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performancerequirements for hearing aids and wireless phones so that no interference occurs when a person uses a “compatible” phone and a“compatible” hearing aid at the same time. This standard was approved by the IEEE in 2000.The FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmfulinterference be found to occur, the FDA will conduct testing to assess the interference and work to resolve the problem.12. Where can I find additional information?U.S. Food and Drug Administration (FDA) webpage on wireless phones (http://www.fda.gov/cellphones)Federal Communications Commission (FCC) RF Safety Program (http://www.fcc.gov/oet/rfsafety)Environmental Protection Agency (EPA) (http://www.epa.gov/radiation/)Occupational Safety and Health Administration (OSHA) (http://www.osha-slc.gov/SLTC/radiofrequency radiation /index.html)National Institute for Occupational Safety ad Health (NIOSH) (http://www.cdc.gov/niosh/emfpg.html)International Commission on Non-Ionizing Radiation Protection (http://www.icnirp.de)World health Organization (WHO) International EMF Project (http://www.who.int/peh-emf/)National Institute of Environmental Health Sciences (NIEHS) (http://www.niehs.nih.gov/emfrapid/home.htm)National Toxicology Program (NTP) (http://ntp-server.niehs.hih.gov/default.html)National Radiological Protection Board (UK) (http://www.nrpb.org.uk/)54
Warranty and ServiceNEC 535 Wireless PhoneLimited Warranty1. What products may be covered by this limited warranty?The following products (the “Products” or the “Product”) purchased through an NEC America, Inc. (NECAM) Authorized Dealer(the “Dealer”) in the United States on or after April 1, 2003 may be covered by this warranty:NEC 535 WIRELESS PHONE2. What does this warranty cover?NECAM warrants to the original end-user Product purchaser (“You”) that the Products will reasonably conform to the applicablepublished specifications in effect at the time of shipment from NECAM to the Dealer, and that the Products will be free fromdefects in materials or workmanship that result in Product failure under normal use during the warranty period described inParagraph 4.3. When does your warranty begin?The warranty period will begin on the date you purchase the Product. Dated proof of purchase is necessary to accompany andProduct returned for warranty service consideration. Valid proof of purchase must identify the point of purchase, date of purchase,Product model or trade name, and Electronic Serial Number.4. How long does the coverage last?The warranty period for the Product is:ONE (1) YEARAny Products repaired or replaced under the terms of this warranty are covered under the warranty for the remainder of theoriginal warranty period or ninety (90) days from the date of service return shipping, whichever is longer.5. What will the manufacturer do if the Product becomes defective in materials or workmanship during the warranty period?If any Product covered under this warranty becomes defective in materials or workmanship resulting in Product failure during theapplicable warranty period, NECAM will, at its option, either repair the defective Product without charge for parts and labor, orprovide a replacement in exchange for the defective Product.55
6. What is not covered by this warranty?(a) THIS WARRANTY DOES NOT EXTEND TO:(i) Products which have been subjected to misuse, abuse, accident, physical damage, improper installation, negligence inuse, abnormal operation or handling, neglect, water or other liquid intrusion, improper temperature, humidity or otherenvironmental condition, including but not limited to, lightening, inundation or fire, or;(ii) Damage caused by computer viruses, or;(iii) Products which have been repaired, altered, or modified by anyone other than an AUTHORIZED service warrantycomponent-level representative of NECAM, or;(iv) Defects caused by equipment, components, parts or accessories not sold by NECAM or use of equipment,components, parts or accessories not compatible with the warranted Product; or,(v) Products whose warranty/quality labels, Product serial number plates or electronic serial numbers have been removed,altered, or rendered illegible, or;(vi) Accessory items such as antenna, cables, curl cords, cases, etc., or;(vii) Products shipped to NECAM for repair from outside the United States, or;(viii) Defects in appearance, cosmetic, decorative, or structural items including framing and non-operative parts.(b) ANY OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE DISCLAIMED OR LIMITED TO THE DURATION OF THISWARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY IS YOUR SOLE AND EXCLUSIVE REMEDY ANDIS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. SOME STATES DO NOT ALLOW DISCLAIMERSOR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLYTO YOU.(c) NECAM’S TOTAL LIABILITY FOR DAMAGES FOR ANY CAUSE RELATED TO OR ARISING OUT OF THE USE ORINABILITY TO USE THE PRODUCT, WHETHER IN CONTRACT, NEGLIGENCE, STRICT TORT, OR BASED ON ANYOTHER LEGAL THEORY, SHALL NOT EXCEED THE ORIGINAL PRICE PAID FOR THE PRODUCT.(D) IN NO CASE SHALL NECAM BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIALDAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, ORANY OTHER LEGAL THEORY. SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSSOF SAVINGS OR REVENUES, INABILITY TO USE THE PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OFCAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES OR SERVICES, CLAIMS BY THIRD PARTIESOTHER THAN YOU, AND INJURY TO PROPERTY. THESE LIMITATIONS DO NOT APPLY TO CLAIMS FORPERSONAL INJURY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL ORCONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.56
(e) THE REMEDIES CONTAINED HEREIN ARE YOUR SOLE AND EXCLUSIVE REMEDIES FOR BREACH OFWARRANTY.7. How do you get warranty service?If your Product requires warranty service, it must be returned to a NECAM Distribution Center with shipping paid by You, alongwith a description of the Product malfunction or difficulty. You are required to substantiate warranty status with a dated proof ofpurchase (as explained in item #3), with the IMEI (International Mobile station Equipment Identity). You may contact NECAM bycalling (800) 637-5917 to obtain the address of the nearest NECAM Distribution Center or at the following Internet web-siteaddress www.necwireless.com/support/, (Email address: support@necwireless.com). NECAM assumes no risk for damages,loss or misdirection in transit of any kind.If, in NECAM’s sole opinion, the Product failure is not covered under this warranty, or proof of purchase does not meet the termsof this warranty, you will be notified and your authorization will be requested for any further repair activity. Products repaired underwarranty will be returned to you, transportation prepaid. In all other cases, you will be required to pay return shipping costs.8. How does state law apply to this warranty?This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.9. This warranty is the entire agreement.Unless modified in writing, signed by both You and NECAM, this warranty in understood to be the complete and exclusiveagreement between the parties, superseding all prior agreements, oral or written and all other communication between the partiesrelating to the subject matter of this limited warranty. No agent, Dealer or employee of NECAM is authorized to make modificationsto this limited warranty and any such representations should not be relied upon.57
NEC Authorized AccessoriesLimited Warranty1. What products may be covered by this limited warranty?The following products (the “Products” or the “Product”) purchased through an NEC America, Inc. (NECAM) Authorized Dealer(the “Dealer”) in the United States on or after April 1, 2003 may be covered by this warranty:NEC AUTHORIZED WIRELESS TELEPHONE ACCESSORIES2. What does this limited warranty cover?NECAM warrants only to the original end-user Product purchaser (“You”) that the Products will conform to the applicablepublished specifications in effect at the time of shipment from NECAM to the Dealer, and that the Products will be free fromdefects in materials or workmanship under normal use and service during the warranty period described in Paragraph 4.3. When does your limited warranty begin?The warranty period begins on the date you purchase the Product. Dated proof of purchase is necessary to accompany anyProduct returned for warranty service consideration. Valid proof of purchase must identify the point of purchase, date of Productpurchase, and the model of Product purchased. However, if such dated proof of purchase identifying the date of Productpurchase, and model of Product is not available, the warranty period begins on the date the Product is shipped from NECAM tothe Dealer.4. How long does the coverage last?The warranty period for the Product is:Ninety (90) DaysAny Products repaired or replaced under the terms of this warranty, are covered under the warranty for the remainder of theoriginal warranty period.5. What will NECAM do if the Product becomes defective in materials or workmanship during the warranty period?If any Product covered under this warranty becomes defective in materials or workmanship during the applicable warranty period,NECAM will, at its option, either repair the defective Product without charge for parts and labor, or provide a replacement inexchange for the defective Product.58
6. What is not covered by this warranty?(a) THIS WARRANTY DOES NOT EXTEND TO:(i) Products which have been subjected to misuse, abuse, accident, physical damage, improper installation, negligence inuse, abnormal operation or handling, neglect, water or other liquid intrusion, improper temperature, humidity or otherenvironmental condition, including but not limited to, lightening, inundation or fire; or,(ii) Products which have been repaired, altered, or modified by anyone other than an AUTHORIZED service warrantycomponent-level representative of NECAM, or;(iii) Defects caused by equipment, components, parts or accessories not sold by NECAM or use of equipment, components,parts or accessories not compatible with the warranted Product; or,(iv) Products whose warranty/quality labels, Product serial number plates or electronic serial numbers have been removed,altered, or rendered illegible, or;(v) Products shipped to NECAM for repair from outside the United States.(vi) Defects in appearance, cosmetic, decorative, or structural items including framing and non-operative parts.(b) ANY OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE DISCLAIMED OR LIMITED TO THE DURATION OF THISWARRANTY. OTHERWISE THE FOREGOING LIMITED WARRANTY IS YOUR SOLE AND EXCLUSIVE REMEDY ANDIS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. SOME STATES DO NOT ALLOW DISCLAIMERSOR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLYTO YOU.(c) NECAM’S TOTAL LIABILITY FOR DAMAGES FOR ANY CAUSE RELATED TO, OR ARISING OUT OF THE USE ORINABILITY TO USE THE PRODUCT, WHETHER IN CONTRACT, NEGLIGENCE, STRICT TORT, OR BASED ON ANYOTHER LEGAL THEORY, SHALL NOT EXCEED THE MANUFACTURER’S SUGGESTED RETAIL PRICE FOR THEPRODUCT.(d) IN NO CASE SHALL NECAM BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIALDAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, ORANY OTHER LEGAL THEORY. SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSSOF SAVINGS OR REVENUES, INABILITY TO USE THE PRODUCTS OR ANY ASSOCIATED EQUIPMENT, COST OFCAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT, FACILITIES OR SERVICES, CLAIMS BY THIRD PARTIESOTHER THAN YOU, AND INJURY TO PROPERTY. THESE LIMITATIONS DO NOT APPLY TO CLAIMS FORPERSONAL INJURY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL ORCONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.(e) THE REMEDIES CONTAINED HEREIN ARE YOUR SOLE AND EXCLUSIVE REMEDIES FOR BREACH OFWARRANTY.59
7. How do you get warranty service?If your Product requires warranty service, it must be returned to a NECAM Distribution Center with shipping paid by you, alongwith a description of the Product malfunction or difficulty. To obtain the address of the nearest NECAM Distribution Center, contactthe Dealer from which you purchased the Product or NECAM. You may contact NECAM by calling (800) 637-5917 or at thefollowing Internet web-site address www.necwireless.com/support/, (Email address: support@necwireless.com). You arerequired to substantiate warranty status with a dated proof of purchase (as explained in item #3). NECAM assumes no risk for anydamage, loss or misdirection in transit of any kind.If, in NECAM’s sole opinion, the Product failure is not covered under this warranty, you will be notified and Your authorization willbe requested for any further repair activity. Products repaired under warranty will returned to you, transportation prepaid. In allother cases you will be required to pay return shipping costs.8. How does state law apply to this warranty?This warranty gives you specific rights, and you may also have other rights, which vary from state to state.9. This warranty is the entire agreement.Unless modified in writing, signed by both You and NECAM, this warranty in understood to be the complete and exclusiveagreement between the parties, superseding all prior agreements, oral or written and all other communication between the partiesrelating to the subject matter of this limited warranty. No agent, Dealer or employee of NECAM is authorized to make modificationsto this limited warranty and any such representations should not be relied upon.NEC Customer Service SupportNEC Service Support can assist you with any additional information that you may need in the operation your NEC cellulartelephone and NEC Authentic AccessoriesTM. Contact NEC Service Support at the following (The 800 number listed providesaccess to NEC Repair Service and Parts Sales):Telephone: Writing*: Email: Website:1-800-637-5917 NEC America, Inc. support@necwireless.com www.necwireless.comService Support6555 N State Hwy 161Irving, Texas 75039-2402To locate the nearest retailer, contact 1-800-255-5664 or send an Email to: sales@necwireless.com.*Send only written correspondence to the above address. Do not send the wireless phone or accessories to this address for repairor service.60
IndexAAccepting a call 29Accessories 49Antenna 19Auto redial 30BBasic calls and phone use 28Battery disposal 18CCall records 47Call waiting 35Caller ID 31Camera 44Checking battery 24Conference calls 36Correcting mistakes 28DDialing calls 28DTMF tones 35EEmergency calls 12Ending calls 28GGames and Apps 46General Care 13HHolding a call 34IInserting SIM Card 22International calls 33LLast number redial 31Low battery 26MMain Menu 8Multi-party call 36Mute a call 35PPause in dialing 32Phone Controls 3Phone number in message text31Placing a call on hold 34Private conversation 37RReceiving calls 29,30Rejecting a call 29Removing SIM Card 23Returning missed calls 31SSafety 12Set tones 39SIM Card 22Speed dialing 32TText entry 40UUser Guide Conventions 1VView finder 44Voice mail 34Volume controls 33WWeb browser 42Wireless System Structure 161
CTIAYour wireless telephone gives you the powerful ability to communicate by voice almost anywhere, anytime whenever wireless phone service is available and safeconditions allow. However, an important responsibility accompanies the benefits of wireless phones, on that every user must uphold. Check the laws and regulations onthe use of wireless telephones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas.When driving a car, driving is your first responsibility. If you find it necessary to use your wireless phone behind the wheel of a car, practice good common sense and remember thefollowing tips:1. Get to know your wireless phone and its features such as speed dial and redial. If available, these features help you to place your call without taking your attention off theroad.2. When available, use a hands free device. If possible, add an additional layer of convenience and safety to your wireless phone with one of the many hands freeaccessories available today.3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an received call at aninconvenient time, if possible, let your voice mail answer it for you.4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions: rain, sleet, snow, ice,and even heavy traffic can be hazardous..Do not take notes or look up phone numbers while driving. Jotting down a “to do” list or flipping through your address book takes attention away from yourprimary responsibility, driving safely.6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will bestationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, and then continue.7. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspendconversations that have the potential to divert your attention from the road.8. Use your wireless phone to call for help. Dial 9-1-1 or the local emergency number in the case of fire, traffic accident, or medical emergency (where wirelessservice is available).9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress, or other serious emergency where lives are in danger, call9-1-1 or the local emergency number, as you would want others to do for you.*10. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, abroken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other specialnon-emergency wireless number.*“The wireless industry reminds you to use your phone safely when driving.” For more information, please call 1-888-901-SAFE, or visit the Cellular Telecommunications and InternetAssociation (CTIA) website, www.wow-com.com62

Navigation menu