NEC of America KMP6J1AR1 Single-Mode PCS GSM Phone w/ Bluetooth User Manual Manual
NEC Corporation of America Single-Mode PCS GSM Phone w/ Bluetooth Manual
Users Manual
N850_CMCC_v1.4_English_master
Software version: FAWD0B00_C01
Personalization: 01_010_CC_FAWD0A00_N850
i
Emergency Services and Safety Precautions
Emergency Services and
Safety Precautions
Emergency Services
To make an emergency call in any country
☛Press 1 1 2 .
Ask the operator for the service which you require: Police,
Ambulance, Fire Brigade, Coastguard or Mountain Rescue
Services. Give your position and, if possible, remain stationary
to maintain phone contact.
The 112 emergency number service is available on every digital
network service. The number 999 is an alternative emergency
number for the UK only, and can only be used with a valid SIM
card.
2Due to the nature of the cellular system, the success
of emergency calls cannot be guaranteed.
General Care
A cellphone contains delicate electronic circuitry, magnets, and
battery systems. You should treat it with care and give particular
attention to the following points.
•Do not allow the phone or its accessories to come into contact
with liquid or moisture at any time.
•Do not place anything in the folded phone.
•Do not expose your phone to extreme high or low
temperatures.
•Do not expose your phone to naked flame, cigars or cigarettes.
•Do not paint your phone.
•Do not drop or subject your phone to rough treatment.
•Do not place the phone alongside computer disks, credit
cards, travel cards and other magnetic media. The information
contained on disks or cards may be affected by the phone.
•Do not leave the phone or the battery in places where the
temperature could exceed 60°C; e.g. on a car dashboard or on
a window sill, behind glass in direct sunlight, etc.
•Do not remove the phone’s battery while the phone is switched
on.
•Take care not to allow metal objects, such as coins or key
rings, to contact or short-circuit the battery terminals.
•Do not dispose of battery packs in a fire. Your phone's Li-ion
batteries may be safely disposed of at Li-ion recycling points.
For more specific battery and power supply information, see
page 4.
•Do not put your phone's battery in your mouth as battery
electrolytes may be toxic if swallowed.
•Do not attempt to dismantle the phone or any of its
accessories.
•This equipment is fitted with an internal battery that can only
be replaced by a qualified service engineer. There is a risk of
explosion if the battery is replaced by an incorrect type.
Dispose of the used battery in accordance with the
manufacturer's instructions.
•Using any battery pack, AC adapter or Vehicle power adapter
(option) not specified by the manufacturer for use with this
phone creates a potential safety hazard.
•The earpiece may become warm during normal use and the
unit itself may become warm during charging.
•Use a damp or anti-static cloth to clean the phone. Do NOT
use a dry cloth or electrostatically charged cloth. Do not use
chemical or abrasive cleaners as these could damage the
case.
•Remember to recycle: the cardboard packaging supplied with
this phone is ideal for recycling.
•Do not leave the battery pack empty or disconnected for a long
time, otherwise some data may be initialized.
•Your phone contains metal which may cause you an itch, a
rash or eczema depending on your constitution or physical
condition.
•Take care not to put your phone in the back pocket of your
trousers or skirt and then sit on it. Also, do not put your phone
at the bottom of bag where it may subject to excessive weight
or pressure.
Doing so may damage the LCD and camera lens and cause
them malfunction.
•Take care not to hold the Light too close to your or other
people’s eyes when the Light is lit.
•Do not aim or direct the InfraRed (IR) data port towards your
or other people’s eyes when using the IR data exchange.
•The foam covers the earpiece of the headset. Do not put any
other part of the headset in your ears.
Aircraft Safety
•Switch off your phone and remove its battery when inside or
near aircraft. The use of cellphones in aircraft is illegal. It may
be dangerous to the operation of the aircraft and it may disrupt
the cellular network. Failure to observe this instruction may
lead to suspension or denial of cellphone service to the
offender, or legal action, or both.
•Do not use your phone on the ground without the permission
of the ground crew.
Hospital Safety
•Switch off your phone in areas where the use of cellphones is
prohibited. Follow the instructions given by the respective
medical facility regarding the use of cellphones on their
premises.
General Safety
•Observe ‘Turn off 2-way radio’ signs, such as those near
stores of fuel, chemicals or explosives.
•Do not allow children to play with the phone, charger or
batteries.
•Small parts are included in your phone. Keep them out of
reach of small children, for whom it could be a choking hazard.
•The operation of some medical electronic devices, such as
hearing aids and pacemakers, may be affected if a cellphone
is used next to them. Observe any warning signs and
manufacturer's recommendations.
•If you have a weak heart, you should take extra precautions
when setting functions such as the Vibrator and Ringer volume
functions for incoming calls.
•If you set the Vibrator setting to anything other than OFF, be
careful that the phone is not near a source of heat (e.g. a
heater) and that it does not fall from a desk due to the vibration.
Road Safety
•You MUST exercise proper control of your vehicle at all times.
Give full attention to driving.
•Observe all the recommendations contained in your local
traffic safety documentation.
•Pull off the road and park before making or answering a call if
driving conditions so require.
•You MUST NOT stop on the hard shoulder of a motorway to
answer or make a call, except in an emergency.
•Switch off your phone at a refuelling point, such as a petrol
station, even if you are not refuelling your own car.
•Do not store or carry flammable or explosive materials in the
same compartment where a radio transmitter, such as a
cellphone, is placed.
•Electronic vehicle systems, such as anti-lock brakes, speed
control and fuel injection systems are not normally affected by
radio transmissions. The manufacturer of such equipment can
advise if it is adequately shielded from radio transmissions. If
you suspect vehicle problems caused by radio transmissions,
consult your dealer and do not switch on your phone until it has
been checked by qualified approved installers.
ii Emergency Services and Safety Precautions
Vehicles Equipped with an Air Bag
An air bag inflates with great force. Do not place objects,
including either installed or portable wireless equipment, in the
area over the air bag or in the air bag deployment area. If in-
vehicle wireless equipment is improperly installed and the air
bag inflates, serious injury could result.
Third Party Equipment
The use of third party equipment, cables or accessories, not
made or authorized by NEC, may invalidate the warranty of your
cellphone and also adversely affect the phone’s operation. For
example use only the NEC mains cable supplied with the AC
charger.
Service
The cellphone, batteries and charger contain no user-
serviceable parts. We recommend that your NEC cellphone is
serviced or repaired by an NEC authorized service centre.
Please contact your Service Provider or NEC for advice.
Non-Ionizing Radiations
The radio equipment shall be connected to the antenna via a
non-radiating cable (e.g. coax).
The antenna shall be mounted in a position such that no part of
the human body will normally rest close to any part of the
antenna unless there is an intervening metallic screen, for
example, the metallic roof.
Use only an antenna that has been specifically designed for your
phone. Use of unauthorized antennas, modifications or
attachments could damage your phone and may violate the
appropriate regulations, causing loss of performance and radio
frequency (RF) energy above the recommended limits.
Efficient Use
For optimum performance with minimum power consumption,
note the following:
•Your phone has the internal antenna. Do not cover part of the
internal antenna of the phone with your hands. This affects call
quality, may cause the phone to operate at a higher power
level than needed and may shorten talk and standby times.
Radio Frequency Energy
Your phone is a low-power radio transmitter and receiver. When
it is turned on, it intermittently receives and transmits radio
frequency (RF) energy (radio waves). The system that handles
the call controls the power level at which the phone transmits.
Exposure to Radio Frequency Energy
Your phone is designed not to exceed the limits for exposure to
RF energy set by national authorities and international health
agencies. * These limits are part of comprehensive guidelines
and establish permitted levels of radio wave exposure for the
general population. The guidelines were developed by
independent scientific organizations such as ICNIRP
(International Commission on Non-Ionizing Radiation
Protection) through periodic and thorough evaluation of
scientific studies. The limits include a substantial safety margin
designed to assure the safety of all persons, regardless of age
and health, and to account for any variations in measurements.
*Examples of radio frequency exposure guidelines and
standards that your phone is designed to conform to:
•ICNIRP, “Guidelines for limiting exposure to time-varying
electric, magnetic, and electromagnetic fields (up to 300 G
Hz)-International Commission on Non-Ionizing Radiation
Protection (ICNIRP)”.
Health Physics, vol. 74. pp, 494-522, April 1998.
•99/519/EC Council Recommendation on the limitation of
exposure to the general public to electromagnetic fields 0 Hz-
300 GHz, Official Journal of the European Communities, July
12,1999.
•ANSI/IEEE C95.1-1992. “Safety levels with respect to human
exposure to radio frequency electromagnetic fields, 3kHz to
300 GHz”. The Institute of Electrical and Electronics Engineers
Inc., New York, 1991.
•FCC Report and Order, ET Docket 93-62, FCC 96-326,
Federal Communications Commission (FCC), August 1996.
•Radio communications (Electromagnetic Radiation Human
Exposure) Standard 1999, Australian Communications
Authority (ACA), May 1999.
Licenses
•T9® Text Input and the T9 logo are registered trademarks of
Tegic Communication.
“T9 Text Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,187,480, 5,818,437, 5,945,928, 5,953,541,
6,011,554, 6,286,064, 6,307,548, 6,307,549, and 6,636,162,
6,646,573; Australian Pat. Nos. 727539, 746674, and 747901;
Canadian Pat. Nos. 1,331,057, 2,302,595, and 2,227,904;
Japan Pat. No. 3532780, 3492981; United Kingdom Pat. No.
2238414B; Hong Kong Standard Pat. No. HK1010924;
Republic of Singapore Pat. No. 51383, 66959, and 71979;
European. Pat. Nos. 0 842 463 (96927260.8), 1 010 057
(98903671.0), 1 018 069 (98950708.2); Republic of Korea Pat.
Nos. KR201211B1 and KR226206B1. People’s Republic of
China Pat. Application Nos. 98802801.8, 98809472.X and
96196739.0; Mexico Pat. No. 208141; Russian Federation
Pat. No. 2206118; and additional patents are pending
worldwide”
•RSA™ is a registered trademark of RSA Data Security Inc.
•OPENWAVE™ is a registered trademark of Openwave
Systems Inc.
•USE OF THIS PRODUCT IN ANY MANNER THAT
COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS
PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO
(A) DATA OR INFORMATION ENCODED BY A CONSUMER
FOR PERSONAL AND NON-COMMERCIAL USE WITHOUT
REMUNERATION; (B) DATA OR INFORMATION (i)
GENERATED BY AND OBTAINED WITHOUT CHARGE
FROM A CONSUMER NOT THEREBY ENGAGED IN A
BUSINESS ENTERPRISE, AND (ii) FOR PERSONAL USE
ONLY; AND (C) OTHER USES SPECIFICALLY AND
SEPARATELY LICENSED BY MPEG LA, L.L.C.
•Helvetica is a registered Trademark of Heidelberger
Druckmaschinen AG which may be registered in certain
jurisdictions.
•Powered by Mascot Capsule®/Micro3D Edition™
•©2002 Music Airport Inc., http://www.music-airport.com/
•Mobile Stock 1.0.10 Copyright © 2005 HandinWeb
•Java and all Java-based trademarks and logos are trademarks
or registered trademarks of Sun Microsystems, Inc in the U.S.
and other countries.
•Copyright 2005 Aplix Corporation and eSOL Co., Ltd. All
Rights Reserved.
•This Mobile Printing Ready product is designed to provide
easy printing from mobile phones. This product follows Mobile
Imaging and Printing Consortium (MIPC) guidelines version
1.0 for PictBridge.
•The Bluetooth® word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by NEC is
under license. Other trademarks and trade names are those of
their respective owners.
•This product contains ACCESS CO., LTD’s IrFront® Infrared
communication software.
Copyright ©1996-2005 ACCESS CO., LTD
•
For the purpose of improvement, the specifications for this
product and its accessories are subject to complete or partial
change without prior notice.
iii
Before You Start
Before You Start
User’s manual conventions
The instructions in this user’s manual make use of the shortcuts selection except special cases.
The following markers are used throughout the user’s manual to attract your attention:
/This type of paragraph will contain details of where to find information related to the topic in question.
2This type of paragraph will contain information worth noting.
,This type of paragraph will contain important information.
☛This type of description will contain procedures to operate your phone.
Menu shortcuts selection
The alternative shortcuts method of selection lets you jump straight to a menu or function without highlighting an icon and scrolling through the intermediate menu
options. The selection is made by pressing numbers which relate to the displayed menu options.
2The instructions in this user’s manual make use of the shortcuts selection, except in special cases.
Reading the titles
Some titles in this manual contain information on how to access the functions. In these titles, M stands for , the numbers indicate the menu shortcut numbers (see
“Overview of menu function” on page ix for details) and ... (three periods) indicate that there are more operations described in the paragraph.
Reading the procedures
“Highlight” means to use the four way navigation keys (▲▼ ) to move the area emphasized with different colouring.
“Select” means to highlight an item and then press .
Procedures are written omitting the verb “press”, except in some special cases.
For example, 1 2 means to:
☛Start from the standby screen ➔ Press to display the Main menu screen
☛Press 1 to display the Settings screen ➔ Press 2 to display the Phone modes screen
Simple procedures are connected by arrows (➔).
Check box/Radio button
A check box enables/disables an option out of a set of options, and multiple check boxes can be selected at the same time. On the other hand, selecting a radio button
automatically cancels the previous selection, so only one radio button can be selected at one time.
A check box/radio button option can be selected/cancelled by highlighting it and pressing .
▼
▼
iv Before You Start
Display information
,The Liquid Crystal Displays (LCD) on your phone are manufactured using high-precision technology. Even so, the LCD may contain pixels (dots) that
fail to light or that remain permanently lit. Note that this is normal and does not indicate a problem with your display.
Status bar area
This area contains icons which
indicate the battery strength, new
SMS/MMS message(s), signal
strength, etc. (see page vii).
On screens other than the standby
screen, the clock display is placed
in this area.
SK1/SK2
This area contains context sensitive
descriptions of the Softkeys’ functions
appropriate for the current screen.
Shortcut number
Press the appropriate
number to jump straight to a
next menu.
The row colour is changed
when selected (e.g. to
activate/deactivate a facility). Help icons
Displayed when you can use the
key represented by these icons
(see page vii).
Next menu icon
Displayed when you can
press or the shortcut
number to show the next
menu.
▼
Page scroll bar
Displayed when you can
press ▼ to scroll to the
next page.
Shortcut menu number
The current menu
number is displayed.
Menu title
Desktop icon area
This area contains the
automatically displayed
and the manually created
desktop icons. They
provide shortcuts to
certain items/functions.
Help area
This area contains help
information appropriate
for the current screen
(e.g. key presses
remaining when
composing a message).
v
Before You Start
Parts and functions
,Be careful not to put your finger or foreign objects in the hinge of the phone when your phone is opened.
Side up key
Side down key
Softkey 1 (SK1)
Celar (CLR)/Back key
Alphanumeric keys
Select ( ) key
End/on-off ( ) key
Softkey 2 (SK2)
Mouthpiece
Charger connector cover
Through-hole for straps
IR port
Earphone jack cover
Rear cover for battery
Speaker
Camera
LED/Light
2nd-LCD
Phonebook ( ) key
MENU ( ) key
Send ( ) key
Main-LCD
Earpiece
4 way navigation ( ) key
vi Before You Start
Keypad shortcuts
The following operations are available from the standby screen.
Key Operation that involves pressing a key See page Operation that involves pressing and holding a key See page
Accessing the Main menu screen ix Setting/Cancelling the Side key lock 23
SK1 Accessing the Message screen 39 Accessing the Msg type screen to create a new message 45
SK2 Accessing the China Mobile in screen 56 Accessing the Monternet home 51
Accessing the Phonebook list screen 57 – –
▲Accessing the Phone modes screen 24 Setting the phone to Meeting mode/Returning to the previous mode 24
▼Accessing the My favorites screen 31 Accessing the voice recall 9
Accessing the received calls list 12 – –
Accessing the missed calls list 12 – –
Accessing the dialled calls list 12 – –
Highlighting a desktop icon 21 – –
Ending a call or returning to the standby screen – Powering off 5
CLR Cancelling the Cell Broadcast message display 50 Deleting all the automatically displayed desktop icons 21
Deleting character or returning to the previous screen – Deleting all characters when you enter text –
1Entering phone numbers 6 Calling the Voice mail centre 64
2 to 9Entering phone numbers 6 One-touch dial to the corresponding number in the phonebook(SIM) 8
0Entering phone numbers 6 Entering + when you make an international call 14
#Entering #6 Entering a pause –
Entering 6 Switching the ALS line 1/2 (If the SIM card supports ALS) 23
Side up Accessing the volume control screen when your phone is open
(Use ▲ ▼, Side keys or 0 to 9 keys to adjust the volume.) 23 Accessing the camera view finder screen 83
Activating the ring silencer function when you receive a call 23
Side down Accessing the volume control screen when your phone is open
(Use ▲ ▼, Side keys or 0 to 9 keys to adjust the volume.) 23 Turning on the light
(To turn it off, press any key or open/close your phone.) –
Activating the ring silencer function when you receive a call 23
▼
▼
vii
Before You Start
LCD and displayed icons
Main-LCD
Indicates the battery level.
Indicates the battery charging status (fast, slow, stop).
Indicates that there is a new SMS in your phone.
Indicates that there is a new SMS on the network.
Indicates that the SIM memory is full.
Indicates that the Inbox in your phone is full.
Indicates that there is an MMS on the server.
Indicates that you have received an alert message.
Indicates secured communication on WTLS in WAP
browsing.
(pink, blue)
Pink indicates that PDP Context is activated, and blue
indicates the connection with GPRS network.
Indicates that Bluetooth is set to on, Bluetooth is in
operation, IR modem is set to on.
Indicates the line status (No ALS or ALS Line 1/ALS
Line 2). The icon with displayed in red indicates
that the ALS line 1 or 2 is unencrypted/no ALS.
Indicates the signal strength level.
Appears when you are outside the service area.
Network name (indicated in orange when using
roaming service)
Desktop icons
See “Desktop icons” on page 21 for details
(red, green/red, green)
Indicates that new voice mail messages are on the
network (No ALS or ALS Line 1/ALS Line 1 and 2/ALS
Line 2).
Indicates the call diversion is set.
Indicates the Meeting mode, Pocket mode, Car mode.
2No icon appears for the Normal mode.
Indicates sound-off, vibrator-on, sound-off/vibrator-
on.
Indicates alarm-on.
Java™ application for the standby screen is
suspended.
Date
Day of week
Remote time
Local time
Indicates that you can use the options menu by
pressing .
Indicates that you can use the phonebook list by
pressing .
Indicates that the help display is available by pressing
when using SIM toolkit.
<When the camera/video view finder is in
operation>
Indicates single/burst mode (camera).
Indicates the video mode is on or the video is
recording.
Indicates that the self timer is on.
Indicates the quality of the picture (super fine, fine,
normal, economy or super economy).
Indicates the quality of the video.
Indicates the photo/video screen size.
3
4
2
5
1
6
7
8 9
10
11
12
13
14
15
17
16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
2
3
4
5
6
viii Before You Start
Indicates the shooting environment.
Indicates the brightness setting. The “+2” setting is the
brightest.
Indicates the zoom level.
<When the video preview is in operation>
Indicates the video mode is set to on, the video is
playing, on pause, fast forwarding, or rewinding.
Indicates the track information of the video (the video
only, the audio only, and the video and audio).
Indicates the video is played in normal/enlarged
screen size.
Displays the current volume level. The 0 is mute and
9 is the maximum.
2nd-LCD
Indicates the battery level.
Indicates
the battery charging status (fast, slow, stop).
Indicates that there is a new SMS in your phone.
Indicates
that there is a new SMS on the network.
Indicates that the SIM memory is full.
Indicates that the Inbox in your phone is full.
Indicates that there is an MMS on the server.
(red, green/red, green)
Indicates that a new voice mail message is on the
network (No ALS or ALS Line 1/ALS Line 1 and 2/ALS
Line 2).
Indicates the Bluetooth is on, Bluetooth is in active, IR
modem is set to on.
Indicates the signal strength level.
Appears when you are outside the service area.
Indicates that the phone is in the Meeting/Pocket/Car
mode.
2No icon appears for the Normal mode.
<When 2nd-LCD is used as the camera view
finder screen>
Indicates the battery level.
Indicates
the battery charging status (fast, slow, stop).
Indicates single or burst mode of the camera.
(blue, red)
Indicates that the video mode is on or the video is
recording.
Indicates the photo/video screen size.
Indicates that the self timer is on.
7
8
2
4
7
8
46
1
2
7
5
3
1
2
3
4
5
6
7
9
10
11
8
8
9
10
11
ix
Before You Start
Overview of menu function
➡➡
➡
➡
Standby screen Main menu screen
CLR
or
SK2
The Main menu has a set of icons for its top levels of options which can be selected either using a
combination of the 4-way navigation key (▲ ▼ ) and (menu selection), or just the keypad
(shortcuts selection).
2The title of the selected option will be displayed in the Help area.
2With the Main menu screen displayed, press 0 to display your own number.
▼
▼
Key Main menu Second level menu
1 Settings Phone
Phone modes
Main-LCD
2nd-LCD
Power saving
Calls
Security
Network
Connection profile
Reset settings
2 My favorites Videos
Sounds
Pictures
MP3
Java™
Key Main menu Second level menu
3 Message Inbox
Drafts
Outbox
Sent
Alert inbox
CB
Folder1
Folder2
4 Monternet@ Go to home page
Bookmark
Snapshot
Alert message
Go to URL
Go to last page
Settings
Key Main menu Second level menu
5 China Mobile in
6Customer service
7 Phonebook Lists
Information #
8 Accessory MP3 player
Calculator
Clock alarm
Scheduler
ToDo list
Notepad
Voice memo
Currency
External connection
Synchronization
Dictionary
Camera
9 Call history
xi
Contents
Emergency Services and Safety Precautions i
Before You Start iii
User’s manual conventions......................................................iii
Display information ..................................................................iv
Parts and functions...................................................................v
LCD and displayed icons........................................................vii
Overview of menu function ......................................................ix
Getting Started 1
Preparing the phone ................................................................ 1
Standby and talk times ............................................................ 4
Checking the battery................................................................ 4
Low battery alarm .................................................................... 4
Other battery alarms................................................................ 4
Start-up.................................................................................... 4
Basic Calls & Phone Use 6
Making basic calls.................................................................... 6
Ending a call ............................................................................ 6
Receiving an incoming call ...................................................... 7
Unsuccessful calls ................................................................... 7
Emergency calls ...................................................................... 8
Last number redial................................................................... 8
One-touch dial ......................................................................... 8
Fast dialling.............................................................................. 8
Displaying your own phone number (M0/M716) ...................... 8
Voice recall .............................................................................. 9
Options menu (during a call).................................................... 9
Putting a call on hold ............................................................... 9
Mute....................................................................................... 10
Call transfer............................................................................ 10
Multi-party calls ...................................................................... 10
Recording a call ..................................................................... 11
Scratchpad number................................................................ 11
Call history (M9).....................................................................11
Call settings (M16) ................................................................. 13
International dialling codes ....................................................14
Roaming................................................................................. 15
Text Entry 17
Mode change ......................................................................... 17
T9® English text input ............................................................ 17
Normal text input....................................................................18
Numeric input.........................................................................18
T9® Chinese Stroke input....................................................... 19
T9® Pinyin input (Simplified Chinese) .................................... 19
T9® Zhuyin input (Traditional Chinese) .................................. 19
Key allocations....................................................................... 20
Desktop icons 21
Settings (M1) 23
Phone (M11) .......................................................................... 23
Phone modes (M12) ..............................................................24
Main-LCD (M13) .................................................................... 26
2nd-LCD (M14) ...................................................................... 26
Power saving (M15) ............................................................... 27
Calls (M16)............................................................................. 27
Security (M17)........................................................................ 28
Network (M18) .......................................................................29
Connection profile (M19)........................................................ 29
xii Contents
Reset settings (M10) ..............................................................30
My favorites (M2) 31
Videos (M21) ..........................................................................31
Sounds (M22).........................................................................31
Pictures (M23) ........................................................................32
MP3 (M24)..............................................................................34
Java™ (M25)..........................................................................34
File selector Options menu.....................................................35
Java™ (M25) 37
Applications (M251)................................................................37
Network setting (M252) ..........................................................37
Resident setting (M253) .........................................................38
Storage info (M254)................................................................38
Access to Java™ download site (M255) ................................38
Message (M3) 39
Message overview..................................................................39
Reading a message (M31) .....................................................40
Options menus .......................................................................41
Creating a message ...............................................................45
Cell broadcast (M36) ..............................................................50
Monternet (M4) 51
What can I download..............................................................51
Web settings...........................................................................51
Logging on to WAP site..........................................................54
Other features.........................................................................54
NEC Web site.........................................................................55
GPRS dial up..........................................................................55
China Mobile in/Customer service (M5/M6) 56
China Mobile in ...................................................................... 56
Customer service................................................................... 56
Phonebook (M7) 57
Phonebook types ................................................................... 57
Accessing your phonebook (M7) ........................................... 58
Phonebook list Options menu................................................ 59
Personal data Options menu ................................................. 63
Voice mail (M717).................................................................. 64
Accessory (M8) 66
MP3 player (M81) .................................................................. 66
Calculator (M82) .................................................................... 67
Clock alarm (M83).................................................................. 67
Scheduler (M84) .................................................................... 68
ToDo list (M85) ...................................................................... 70
Notepad (M86)....................................................................... 71
Voice memo (M87)................................................................. 73
Currency (M88)...................................................................... 73
External connection (M89)..................................................... 74
Synchronization (M80)........................................................... 74
Dictionary (M8*) ..................................................................... 75
Camera (M8#)........................................................................ 76
Bluetooth (M891) 77
Using Bluetooth connection ................................................... 77
IR Data Exchange 80
Positioning of the phones....................................................... 80
xiii
Contents
IR send .................................................................................. 80
IR receive (M8921) ................................................................ 81
IR modem (M8922)................................................................ 81
Camera (M8#) 83
Notes on using the camera.................................................... 83
Taking a picture (M8#1)......................................................... 84
Recording a video (M8#2) ..................................................... 86
Index 89
xiv Memo
Memo
1
Getting Started
Getting Started
Preparing the phone
Before trying to use your phone, make sure that a valid Subscriber Identity Module (SIM) card is inserted and the battery is charged.
SIM card
Before using your phone, you must sign-up with one of the digital network service providers. In addition to your subscription details you will receive a personal SIM
(Subscriber Identity Module) card which is inserted into your phone.
If the SIM card is removed, the phone becomes unusable until a valid SIM card is fitted. It is possible to transfer your SIM card to another compatible phone and resume
your network subscription. The screen on your phone will display appropriate messages if no SIM card is fitted.
,If the phone, or the SIM card, is lost or stolen then you should contact your service provider immediately in order to bar it from use.
2The phone supports a number of languages and the keyboard symbols have been chosen for world-wide operation.
2The digital technology of your phone helps to ensure that your conversations are kept secure.
2The SIM card contains personal data such as your electronic phonebook, messages (see “Message (M3)” on page 39) and also details of the network services you
have subscribed to. The phone will not work (except for emergency calls on some networks) unless a valid SIM card is fitted.
,Be sure to turn the phone off before inserting and removing a SIM card. Otherwise damage to the SIM card can occur.
Inserting a SIM card
,Be sure to turn the phone off before removing the battery pack.
☛While pressing down the areas marked with of the rear cover as indicated by arrow ➀, slide the rear cover about 3 mm in the direction of arrow ➁ with
your finger tip. Then, lift the cover up in the direction of arrow ➂ to remove it.
☛Lift the finger tab of the battery pack up in the direction of arrow ➃. Then lift the battery pack out in the direction of arrow ➄.
☛With the metal part facing down, insert the straight end of the SIM card under the holder in the direction of arrow ➅. Slide the SIM card all the way until it reaches
the end.
,Be careful not to damage electric parts of the SIM holder when inserting a SIM card.
☛Insert the two tabs on the battery pack into the slots on the phone in the direction of arrow ➇, making sure that the tabs on the battery pack fit properly into the
slots on the phone. Then, press the battery pack down in the direction of arrow ➈ to clip it into the phone.
☛Make sure that the battery pack is securely attached to the phone and align the rear cover with the grooves on the phone so that there is a gap of about 3 mm
at the end of the cover. After making sure that there is no gap between the rear cover and the phone body, slide the rear cover in the direction of arrow ➉ until
you hear a click.
2Getting Started
.
,If the SIM card is not fully inserted when the battery is replaced, damage to the SIM card can occur.
/If the SIM card is already fitted, see “Start-up” on page 4.
Removing a SIM card
☛With the battery removed, push the short and straight end of the SIM card with your thumb to slide it gently in the direction of arrow ➆ ➔ Lift the SIM card after
it is completely removed from the holder.
,Be careful not to damage electric parts of the SIM holder when removing a SIM card.
Rear cover
About 3 mm
Battery
Finger tab
Holde
r
SIM card
Tabs
Slots
About 3 mm
Check that there is no gap
between the rear cover
and the phone body.
3
Getting Started
Charging the battery
Before trying to use your phone, insert the phone’s battery and connect the NEC battery charger (AC adapter) supplied with your phone to a suitable mains power socket.
☛Pull open the charger connector cover gently.
,Be careful when handling the charger connector cover. Do not pull strongly.
☛With the arrow marks of the charger plug facing up, hold the buttons on both sides of the charger
plug with your thumb and index finger.
☛Press the buttons as indicated by the arrow marks on the charger plug and insert the plug into the
charger connector.
,Make sure to insert the charger plug with the arrow marks facing up. Otherwise, damage to the
charger connector can occur when disconnecting the charger plug.
2If your phone is turned on and charging starts, the battery charging icon will be displayed. LED will
turn on in red while charging. When charging is complete, the LED will turn off.
2You are recommended to switch off the phone while charging. If you need to receive calls, your
phone can be switched on and left in standby while being charged, although the total time taken to
charge is then increased.
☛After the charging is complete, press the buttons of the charger plug as indicated by the arrow marks
on the charger plug (➀) and gently pull straight out of the charger connector (➁).
,Make sure to press both buttons when disconnecting the charger plug from the charger
connector. If you pull the charger plug forcibly without pressing the buttons, damage to the
charger connector can occur.
The icons show the charging status of battery.
Fast battery charging Slow battery charging while the phone is in use Battery charging stopped due to overheat
,Using any battery pack, AC adapter, vehicle power adapter (option) not specified by NEC for use with this phone can be dangerous and may invalidate
any warranty and approval given to the cellphone. Do not leave the charger connected to the mains supply when it is not in use.
,Do not try to charge the battery if the ambient temperature is below 5°C (41°F) or above 35°C (95°F).
,DO NOT connect a charger or any other external DC source until the phone’s battery is inserted.
2If the phone does not respond, please wait for a few minutes. The charging will then start.
2If you use the phone while charging, handle the phone carefully since the cable or adapter is connected.
2If you make/receive a call while charging, the charging may temporarily be interrupted.
2Charging takes approximately 3 hours with your phone turned off.
2Even if the phone remains connected to the charger, battery residual capacity may decrease when the phone is used for video recording, playing or other battery
consuming operation.
Charger connector
Charger plug
Press
Press
Pull straight
Make sure to press both buttons and gently pull
the charger plug straight.
Charger connector
Charger plug
Arrow marks
Press
Press
Make sure to hold the charger plug with the arrow
marks facing up and press both buttons.
4Getting Started
,IMPORTANT BATTERY CHARGING INFORMATION
Charging a very low battery
The battery’s charge continues to drop after the low battery warning is displayed. In extreme cases where the battery is left uncharged for some considerable time
after this warning, a trickle charge is used to slowly top-up the battery to the safe level at which the fast charging can begin. The phone can be in trickle charge for
a few minutes before the fast charging starts.
Standby and talk times
Your phone works closely with the network you are using to provide the services you need, and the standby and talk times achieved will depend on how you use the
phone and choices made by the network operator.
In particular, factors such as your location within the network, the frequency at which this location is updated, the type of SIM card you have, your reception of area
messages or cell broadcast messages and the use of full rate or enhanced full rate speech, will affect both standby and talk times.
Checking the battery
☛Check icon at the top of the standby screen.
The number of blocks on the icon shows the charge of your battery pack.
Full battery power Partial battery power Low battery power Battery empty
Low battery alarm
When the battery voltage falls below the working level, a low battery warning is displayed on the screen accompanied by LED illumination and a short tone along with
an empty battery icon. The phone will automatically power down shortly afterwards.
2Please charge the battery as much as possible when the battery is very low.
Other battery alarms
Your phone may display warnings when the battery temperature is too high, or the voltage of the battery or the charger is over the appropriate level. Follow the instruction
given by these warnings immediately.
Start-up
Switching the phone on
☛Hold down for about a second to switch on. The screen will display the selected greeting (if set, see page 26) and the phone is then in standby.
2You may need to charge the battery before using your phone.
5
Getting Started
2When your phone is turned on, the specified ringer may sound.
2If your phone is accidentally turned off while downloading or deleting Java™ application, it will take longer than usual to start up the phone the next time you turn
on the power.
Switching the phone off
☛Hold down until the display shows the switch off message.
PIN code
The SIM card issued by your service provider has a security feature called PIN code protection. The Personal Identification Number (PIN) is a number put on to the
card by your service provider, and is 4 to 8 digits long. Some service providers supply SIM cards which will cause your phone to prompt for a PIN code when it is turned
on. If this is the case, enter your code with the phone’s keypad. If you insert a SIM card other than your own, information such as call logs may be lost (see “Security
(M17)” on page 28 for details).
6Basic Calls & Phone Use
Basic Calls & Phone Use
Making basic calls
You make a simple call in the same way as you would with a normal phone, except that you need to press after entering the area Subscriber Trunk Dialling (STD)
code and the phone number. To make international calls, you must first enter the international dialling code (see page 14).
2Use the full STD area code even if you are calling to a person in the same town. If the numbers are too long to be displayed within one line, after pressing , excess
part is deleted and ‘...’ is added at its end.
2The main-LCD display shows the strength of the radio signal that links your phone to the network. The maximum signal strength is shown by 4 shaded blocks and
the minimum signal strength by 1 block.
Starting a call
☛Key in the phone number. Check the number on the display ➔ or SK1 to send the input number to start the call
☛Before the other party answers the call, you can end the call by pressing briefly, pressing SK2 or closing your phone. When you use the headset, you can
also end the call by pressing or holding the button on it.
2When connecting a wired headset and Bluetooth headset at the same time, the wired headset will not work.
When the call is sent, the screen displays the number called, the name stored in the phonebook and a connection graphic or a Calling Line Identification (CLI) picture
that has been allocated to the number called (see page 62).
Correcting mistakes
Use the and to move the cursor and then press CLR to clear individual digits, or hold down CLR to completely clear a phone number.
Ending a call
☛While talking, press SK2 or briefly, or close your phone. The phone returns to the standby screen.
2If is held down, your phone will turn off.
2When you use the headset, you can also end a call by pressing or holding the button on it.
2When connecting a wired headset and Bluetooth headset, the wired headset will not work.
2You cannot end a call by closing your phone when the headset is connected.
▼
▼
7
Basic Calls & Phone Use
Receiving an incoming call
When someone calls your number, the ringer will play (if set - see page 25), the LED glows in the specified colour, and the phone number of the caller may be displayed
if the calling line identification facility is available and the caller has activated the feature. If the caller’s phone number has been related and stored in your phonebook
with a name and a CLI picture (see page 62), that name and picture will be displayed. If the caller has withheld their identity, the screen will give a message that the
caller’s number is being withheld. If the origin of the call cannot be determined, no information is displayed on the screen.
2You also have options for holding and forwarding calls. These options depend on your network and your subscription arrangements.
Accepting an incoming call
☛While receiving an incoming call, press or SK1
2When you use the headset, you can also accept an incoming call by pressing the button on it.
2When connecting a wired headset and Bluetooth headset, the wired headset will not work.
2When Auto answer function (see page 26) is set to on and a headset is connected to the phone, the incoming call is automatically accepted after several rings.
2You can accept an incoming call by opening your phone, when Fold answer function (see page 23) is set to on.
2You can set your phone to answer a call when any key is pressed (see “Any key answer” on page 23).
Rejecting an incoming call
☛While receiving an incoming call, press or SK2 briefly or close your phone.
2When you use the headset, you can also reject an incoming call by pressing and holding the button on it.
2You cannot reject a call by closing your phone when the headset is connected.
2When connecting a wired headset and Bluetooth headset, the wired headset will not work.
If your phone receives a call and you do not answer it, the main-LCD will display a desktop icon of the phone number (or the name if stored) of the caller (if available).If
your phone is closed, the 2nd-LCD will also display a missed call icon, and you can display the details by pressing Side up. This information is stored in the missed
calls list. Up to 20 missed calls are stored in this list.
2If you are making a call, the phone gives priority to receiving a call unless you have already pressed .
/See also: “Call diversion (M161)” on page 13 and “Call waiting and holding (M162)” on page 14.
/See also: “Call history (M9)” on page 11.
Unsuccessful calls
If dialled call is not successfully connected, the display will give an appropriate message.
If your phone has the auto redial function activated, the number will be automatically called again after a short delay (see page 14).
8Basic Calls & Phone Use
Emergency calls
The standard emergency number of 112 can be used.
☛Key in 1 1 2 ➔ or SK1 to connect the call to the local emergency services.
2On some networks, emergency calls can be made using the 112 number without a SIM card inserted.
Last number redial
You can redial the last number you called.
☛Ensure that the standby screen is displayed and no phone number is shown ➔ twice to dial the last number you called.
/See also: “Call history (M9)” on page 11.
One-touch dial
One-touch dial for the phonebook (SIM) is available by pressing and holding the number keys between 2 and 9.
2A number for the One-touch dial corresponds to the location number in the phonebook (SIM).
2One-touch dial is available only for the phone numbers with the location number 2 to 9 stored in the phonebook (SIM).
Fast dialling
You can make a call to the phone number in the phonebook (Phone/SIM) with just a few press of button.
To fast-dial the phone number in the phonebook (SIM), use the following procedure:
☛From the standby screen, key in the Location number of a personal data in the phonebook (SIM). Then, press #. The corresponding personal data is displayed.
☛ to dial the phone number.
To fast-dial the phone number in the phonebook (Phone), use the following procedure:
☛From the standby screen, key in the Abbreviated Dialing Number (ADN) of a personal data in the phonebook (Phone). Then press . The corresponding personal
data is displayed.
☛Use the and keys to choose the phone number (if there are more than one), then to dial the phone number.
Displaying your own phone number (M0/M716)
☛ 0 or 7 1 6
▼
▼
9
Basic Calls & Phone Use
Voice recall
You can store up to 10 voice recall recordings which can be allocated to a personal data stored in the phonebook (Phone). To store the voice recall sound, see page 62.
To use the voice recall function, use the following procedure:
☛Press and hold ▼
2When you use the headset, you can also activate the voice recall function by pressing and holding the button on it from the standby screen.
☛Within 4 seconds, say the word or words you have recorded to identify the record you wish to recall. If the word or words were recognized, the first phone number
of the personal data stored in the phonebook (Phone) will be called automatically.
Options menu (during a call)
☛During a call, to display the options menu
2Depending on the conditions, some options may be displayed in gray and not be available.
Putting a call on hold
☛To put the received or dialled call on hold, SK1 or 2. To retrieve the call, SK1 or 2 again.
No. Options menu (during a call)
1 Main menu Displays the Main menu screen. See “Overview of menu function” on page ix for details.
2 Hold/Retrieve Puts the call(s) on hold or retrieves the call(s).
3Mute/Unmute Mutes or unmutes your voice to all active calls.
4 Transfer call Enables to transfer the call and connect other parties.
2After transferring the call, your call will be dropped.
5 Add to conference Merges calls and makes a multi-party call.
6 Private call Make a private call to the highlighted party within the multi-party call.
7 Record call Records the call while talking.
8 Disconnect party Disconnects the highlighted party.
9 Switch call to Bluetooth/
Switch call to phone Switches the audio path state of the call.
2This option is available only when the Bluetooth device is connected to the phone.
0 Bluetooth On Activates the Bluetooth device.
10 Basic Calls & Phone Use
Mute
You can mute the sound from the mouthpiece during a call. When your call is muted, the other party cannot hear any sound from your phone, but you can still hear the
sound from the other party.
☛To mute the sound during a call, press 3. To retrieve the sound, press 3 again.
2The mute function is automatically released after the call ends.
Call transfer
When you have an active call and a held call, you can transfer the call and connect the two parties, then you can drop from the line while leaving those two calls active.
☛To transfer the call, 4.
2After dropping from the call with the other two parties, if you have a call waiting, you can proceed the call with it.
,Call transfer facility is SIM dependent.
Multi-party calls
If your SIM card is multi-party enabled, you can make a conference call to more than one caller. To create the multi-party calls, at least 3 parties, including the host, are
needed.
Receiving the second call
☛SK1 or to accept the second call ➔ SK2 or 5 to merge both calls to initiate a multi-party call.
2When you accept the second call, the first call will be put on hold.
Making the second call
☛SK1 to put the first call on hold ➔ Key in the phone number ➔ SK1 or to make the second call ➔ After the second participant answers, SK2 or 5 to
merge both calls to initiate a multi-party call.
Putting the multi-party calls on hold
☛SK1 or 2 to put all calls on hold ➔ To retrieve the call, press SK1 or 2 again.
2You can put the multi-party calls on hold only when you are a host of the multi-party calls.
Making a private call
While on the multi-party call, you can make a private call to a specific party.
11
Basic Calls & Phone Use
☛To make a private call, highlight the desired party you want to make a private call to ➔ 6
☛To end a private call and return to the normal multi-party call ➔ 5
2While you are on a private call, other parties can continue with their conversation.
2You can make a private call only when you are a host of the multi-party calls.
Ending the multi-party calls
☛To end the multi-party calls, or SK2.
☛To disconnect a specific party on a multi-party call, highlight the party you wish to disconnect ➔ 8
2You can disconnect a specific party on the multi-party calls only when you are a host of the multi-party calls.
,Multi-party call facilities are network dependent.
Recording a call
You can record the conversation during the call.
☛During a call, press and hold ▼ or 7 to display the Voice memo screen ➔ SK1 to start the recording ➔ SK1 to pause and SK2 to stop the recording ➔
To play the recording, see “Recording/playing voice memo or setting speaker” on page 73.
Scratchpad number
Your phone has a scratchpad facility that enables you to take down a phone number during a call and then make a call to it when you have finished. This scratchpad
number can be stored in memory for future use.
Noting & calling a scratchpad number
☛During a call, key in the number to be placed in the scratchpad. It will be shown on your phone’s screen ➔ when the call is finished. The number will still be
displayed. Press to dial the displayed number.
Call history (M9)
From Call history, you can display the list of missed, received and dialled calls, the duration of the last call made and all calls, charge information and the redial blacklist.
☛ 9 to display the Call history screen.
No. Call history
1 Missed calls Displays the list of missed calls. You can also access this function by pressing from the standby screen.
2 Received calls Displays the list of received calls. You can also access this function by pressing from the standby screen.
▼
▼
12 Basic Calls & Phone Use
2Depending on the conditions, some options may be displayed in gray and not be available.
Display missed/received/dialled calls Options menu (M91M/M92M/M93M)
☛ or 9 1 for missed calls, or 9 2 for received calls, or or 9 3 for dialled calls.
☛Highlight a number in the list ➔
3 Dialled calls Displays the list of dialled calls. You can also access this function by pressing from the standby screen.
4 Last call duration Displays the duration of the last call made on your phone.
☛SK1 to reset the display to zero.
5 Total calls duration Displays the duration of the total calls made on your phone.
☛ SK1 ➔ 1 to reset the duration of the total dialled calls, 2 to reset the duration of the total received calls, or 3
to reset the duration of all calls.
6Charge info Displays the charge information (Advice of Charge - AoC).
,The AoC facility is SIM card and network dependent.
2To reset the display to zero, set the maximum charges or edit the unit price, you may be prompted to enter
the PIN2 code.
1 Total charge Displays the total charge.
☛SK1 to reset the display to zero.
2Maximum
charge Displays the maximum charge.
☛Key in the maximum number of units allowed ➔ SK1
3Unit price Displays the unit price.
☛Highlight the whole number (integer), the decimal number or the currency field ➔
Key in the required value for the whole number and decimal number fields. For the
currency field, key in the currency type using a maximum of three characters ➔ SK1
7 Redial blacklist Accesses the numbers in the blacklist.
2If dialled call is not successfully connected (e.g. number busy), the auto redial facility will be offered (see
page 14). If you have set auto redial and the call still fails, the number called will be added to the blacklist.
No. Missed calls/Received calls/Dialled calls Options menu
1Call Calls the current number.
No. Call history
▼
▼
13
Basic Calls & Phone Use
2Depending on the conditions, some options may be displayed in gray and not be available.
Call settings (M16)
From the Calls screen, you can change various call settings: the call diversion, call waiting and holding, and auto redial.
Call diversion (M161)
Setting Call diversion
☛ 1 6 1 ➔ Highlight the type of call you wish to divert.
2 There will be a delay while your phone checks its divert status with your network.
☛Highlight one of the conditions ➔ When the phone number field of a divert condition is highlighted, either enter the phone number to divert to, or delete any
existing phone number.
☛If you have made any mistake, highlight the appropriate field ➔ SK1 to clear any mistakes.
☛If the settings are correct,
,There will be a short delay while the network sends the divert status of your phone.
,There may be an additional charge for this service depending on your network.
,There may be unavailable settings depending on your network.
2 Create message Creates a new message to the highlighted phone number.
3 Add to phonebook Adds the current number to the phonebook.
☛1 to add it as a new personal data, 2 to add it to an existing personal data ➔ Press the appropriate number for the
storage destination ➔ Press the appropriate number for the phonebook data field to copy the current number to.
4 Delete one Deletes the current number.
5 Delete all Deletes all the numbers in the list.
6Info Displays information on the current number.
7 Add desktop icon Creates a desktop icon of the selected number.
8Items/Page Selects either to display 4 or 8 phone numbers in one screen.
No. Missed calls/Received calls/Dialled calls Options menu
14 Basic Calls & Phone Use
Call diversion edit options menu
☛Highlight the required edit field ➔
2Depending on the conditions, some options may be displayed in gray and not be available.
Call waiting and holding (M162)
This facility informs you that another call is being made to your phone while an existing call is in progress.
Setting up call waiting
☛ 1 6 2 ➔ 1 1 to activate, 1 2 to deactivate the call waiting, or 2 to check the status of call waiting.
Using call waiting
☛If you are on a call and another comes in, you will be alerted by a beep in the earpiece ➔ SK1 to accept the incoming call.
☛To switch the calls, SK1
☛To merge the calls, SK2 (see “Multi-party calls” on page 10).
☛To end the current call,
☛To retrieve the held call SK1
Auto redial (M163)
With the auto redial facility, your phone will redial a number up to 10 times if the first attempt fails. A tone will be heard at each redial attempt. Your phone cannot connect
a call if the other party is busy or if there are network problems. Pressing SK2 during a redial attempt will abort it.
☛ 1 6 3 ➔ 1 to activate or 2 to deactivate the auto redial facility.
International dialling codes
When you make an international call from any country, you must start by dialling a special international access code. Your phone has the facility to prefix a + symbol
to the numbers, so that you need not enter the access code for the country that you are calling from.
No. Call diversion edit options menu
1 Copy Copies the number in the edit field.
2 Paste Pastes the previously copied number.
3 Disable all Disables the numbers from all the fields.
4 Phonebook Displays the phonebook to insert a number in the edit field.
5 Add to phonebook Adds the number to the phonebook as a new personal data or saves the number in an existing personal data.
15
Basic Calls & Phone Use
Entering international dialling codes
☛Hold down 0. The 0 character displayed will change to a + character ➔ Key in the country code, area code, and phone number that you wish to call.
The UK country code is always 44, no matter what country you are dialling from. For example, a typical UK number of 0131 1234567 is entered as:
Roaming
,You will be charged for calls forwarded to you while roaming.
The roaming facility enables you to use your phone in many parts of the world and pay all charges through your normal service provider. Your network operator usually
has agreements with named networks in other countries so that automatic roaming can take place with these named networks. The phone also allows you to set network
preferences of your own.
When dialling, you will need to add the international access codes if required. So, storing all numbers with the codes (such as +44 for UK) is helpful (see “Entering
international dialling codes”).
2Before leaving your home country, you should select any preferences such as bar calls or call diversion.
Setting Automatic or Manual network selection (M181)
☛ 1 8 1 ➔ 1 to select the automatic mode or 2 to select the manual mode.
,Before you manually select a network, ensure it is covered under the agreement you have with your service provider.
New search (M182)
☛ 1 8 2 to search the available networks➔ Highlight the desired network ➔ to connect to it.
Viewing/editing network list (M183)
,Before editing your network list, please consult with your service provider.
☛ 1 8 3 to read the network list in the SIM memory ➔ Highlight the required network ➔
International access country code area code phone number
+ 44 131 1234567
No. SIM list Options menu
1Add Adds a new network to the list.
2Move Moves the highlighted network within the list.
☛Use ▲ and ▼ to move the network ➔ SK1
3Remove Deletes the highlighted network.
16 Basic Calls & Phone Use
2Depending on the conditions, some options may be displayed in gray and not be available.
Selecting the frequency band (M184)
You have to select the frequency band to suit the location.
☛ 1 8 4 ➔ Select the required frequency band.
2Frequency bands must be adjusted to suit the location when roaming (Europe, US, etc.), for the phone to work properly.
17
Text Entry
Text Entry
This section describes how you enter text.
Mode change
☛With a text entry screen displayed, press SK1 to change the text entry mode.
2Depending on the Language setting (see “Language” on page 24 for details) the type of text input mode you can use varies:
•Chinese mode: T9® Chinese stroke, T9® Pinyin/Zhuyin, Numeric input, Normal text (ABC)
•English mode: T9® English text, Normal text (ABC), Numeric input
T9® English text input
Your phone incorporates T9® Text Input, enabling fast, easy and intuitive text input. For each letter to be keyed in, you only need to press the alphanumeric key once.
The screen will display the word you may require based on the internal English dictionary of your phone.
☛With a text entry screen displayed, press SK1 until the entry mode is T9® English input.
i) For example, to enter “Good”:
☛ Press 4 6 6 3, and then press 0 to confirm the word.
ii) To enter “Peter is good”:
☛Press to shift to upper case (for one letter). You will see a green arrow in the Help area.
☛Press 7 3 8 3 7 to display “Peter”, and then press 0 to confirm.
☛Press 4 7 to display “is”, and then press 0 to confirm.
☛Press 4 6 6 3 to display “good”, and then press 0 to confirm and the sentence is completed.
Key Function
0Confirms a word and inserts a space.
1Inserts a period or a single quote as in “Let’s”, “we’re”, “it’s”, etc.
SK1(List) Displays the list of other matching words.
SK1(Spell?) Activates the spell mode which temporarily deactivates T9® for you to spell the word in Normal text input. The
spell mode ends when you key in 0 to enter a space, or SK1(T9).
SK2(Dismiss) Cancels the T9® matching word list.
18 Text Entry
Normal text input
☛With a text entry screen displayed, press SK1 until the entry mode is Normal text (ABC) input.
☛Use alphanumeric keys to enter letters. For example, to enter “e,” press 3 twice; to enter “f,” press 3 three times. For other functions, see the table below.
2If you have made a mistake, use ▲ ▼ to place the cursor to the left or the right of the incorrect character (depending on the Clear mode setting, see page 50
for details) and then press CLR.
2When entering normal (ABC) text, and the character you require is displayed, use to move to the next character position (if you wait for more than 1 second, the
cursor will move one character to the right automatically).
Numeric input
☛With a text entry screen displayed, press SK1 until the entry mode is Numeric input.
SK2(Next) or #Displays the next candidate.
or Places the cursor.
0 to 9 (press and hold) Inserts the number.
CLR Deletes any character.
Toggles between lower case, shift (upper case for one letter) and caps lock (permanent upper case).
(press and hold) Press and hold to activate the highlight mode (see “Highlight mode” on page 50).
#Activates symbol mode when no word is highlighted.
Key Function
Toggles between lower case, shift (upper case for one letter) and caps lock (permanent upper case).
(press and hold) Press and hold to activate the highlight mode (see “Highlight mode” on page 50).
0Inserts a space.
0 to 9 (press and hold) Inserts the number.
CLR Deletes any character.
or Places the cursor.
#Activates symbol mode.
Key Function
▼
▼
▼
▼
▼
▼
▼
19
Text Entry
2You can also press and hold the number key to insert the number in T9®/Normal text input mode.
☛Use alphanumeric keys to enter numbers.
T9® Chinese Stroke input
☛With a text entry screen displayed, press SK1 until the entry mode is T9® Chinese Stroke input.
☛Press to toggle Radical mode on/off. (If ON, an indication appears in the stroke bar.)
☛Press 1 to 6 to add a stroke to the stroke bar, and display candidate characters.
☛To select a candidate, press SK1 or 0 and then the character number (1-9), or press and hold the character number for one second. (Pressing ▲ or ▼ will
display more characters when there are more than 9 candidates.)
2If the radical mode is on, radicals will appear with a dotted line underneath. Select a radical to copy it to the stroke bar, where more strokes may be added.
2When a character has been selected, it is copied to the edit field and the cursor moves to the right to accept the next character.
T9® Pinyin input (Simplified Chinese)
☛With a text entry screen displayed, press SK1 until the entry mode is T9® Pinyin input.
☛Press 2 to 9 keys to enter a pinyin, based on the normal key mapping. Matching pinyins are displayed in the top row of the T9® bar.
☛Use or to highlight a pinyin.
☛If a complete pinyin is highlighted, you may press SK2 to display the Tones ➔ To select a Tone, press the Tone number.
2Character candidates are displayed on the candidate bar. (Pressing ▲ or ▼ will display more characters when there are more than 9 candidates.)
☛To select a character, press SK1 or 0 and then the character number (1-9), or press and hold the character number for one second.
2When a character has been selected, it is copied to the edit field and the cursor moves right to accept the next character.
T9® Zhuyin input (Traditional Chinese)
☛With a text entry screen displayed, press SK1 until the entry mode is T9® Zhuyin input.
☛Press a key (1-9, , #) to enter a zhuyin, based on the BoPoMoFo key mapping. Matching zhuyins are displayed in the top row of the T9® bar.
☛Use or to highlight a zhuyin.
☛If a complete zhuyin is highlighted, you may press SK2 to display the Tones ➔ To select a Tone, press the Tone number.
2Character candidates are displayed on the candidate bar. (Pressing ▲ or ▼ will display more characters when there are more than 9 candidates.)
☛To select a character, press SK1 or 0 and then the character number (1-9), or press and hold the character number for one second.
2When a character has been selected, it is copied to the edit field and the cursor moves right to accept the next character.
▼
▼
▼
▼
20 Text Entry
Key allocations
Whenever you need to enter text (for messages, storing names with numbers, etc.), successive presses of an alphanumeric key will display different characters.
Pressing in T9® English text input or Normal text (ABC) input toggles between lower case, shift (upper case for one letter) and caps lock (permanent upper case).
When a text entry screen is displayed, pressing SK1 enables you to select Normal text input (ABC), T9® Text input (T9) or Numeric input (123).
2Depending on the types of text entry screens, not all types of text entry modes are available.
Symbol mode
In the symbol mode, pressing each key will input a symbol according to its position on the Symbols screen. By pressing # in a text entry mode other than T9® Zhuyin
input mode, the Symbols screen will be displayed. Use ▲ and ▼ to select the row, and then press the appropriate number on the column of the required symbol.
21
Desktop icons
Desktop icons
Desktop icons are shortcuts to functions or items. You can activate a desktop icon on the standby screen (desktop) in stead of following the menu and pressing the
shortcut numbers.
The desktop icons are displayed in two rows on the standby screen. See “LCD and displayed icons” on page vii for the actual location of the desktop icon area.
There are two types of desktop icons: the automatically displayed and the manually created.
Automatically displayed desktop icons
The following automatically displayed icons are displayed on the upper row of the desktop icon area:
2You can delete all the automatically displayed icons by pressing and holding CLR on the standby screen.
2If you turn the phone off, all the automatically displayed desktop icons are deleted.
Manually created desktop icons
The following manually created icons are displayed on the lower row of the desktop icon area
Icon name Image Description
Missed call Displayed when there is a new entry in the Missed calls list.
Missed message Displayed when there is a new message you have not acknowledged.
Icon name Image Description
Phone number Displays a dialer screen with the registered phone number displayed.
Message Creates a new message to the registered phone number or Email address.
Picture Displays the image file.
Note Displays the note.
Camera Displays the camera view finder screen.
Video Displays the video view finder screen.
MP3 player Displays the MP3 player screen.
Calculator Displays the Calculator screen.
Clock alarm Displays the Set alarm screen.
Scheduler Displays the Monthly/Weekly calendar screen.
22 Desktop icons
Creating a desktop icon manually
☛Highlight the required function (Camera/Video/MP3 player/Calculator/Clock alarm/Scheduler/ToDo list/Notepad/Voice memo/Currency/Dictionary) or display the
item (image file/note file/phone number/Email address).
☛For functions, SK1
☛For items, to display the Options menu and select Add desktop icon (for an image/note file, this menu is under Use item)
2For Camera/Video/MP3 player, you can also display the Options menu and select Add desktop icon (for Camera/Video, this menu is under Other settings).
2You can create up to 10 desktop icons.
2If you have more than 5 desktop icons, an arrow will be displayed to indicate that you can scroll for more icons.
2The phone number or Email address desktop icon data will not be updated when the original data is modified. Delete the old desktop icon and create a new one
in such a case.
2When you create a desktop icon of an image file or notepad file, the file will be automatically protected. The default title will be the file name. Even if this title is
changed, the original file name will remain the same.
2Each manually created desktop icon has a title that you can edit.
Activating a desktop icon
☛ ➔ Highlight the required desktop icon ➔
2If you do not press any key for three minutes after highlighting a desktop icon, the highlight is cancelled and the screen goes back to the normal standby screen.
2If you activate an automatically displayed desktop icon, it will be deleted automatically.
Desktop icon Options menu
☛Highlight a desktop icon ➔
ToDo list Displays the ToDo list screen.
Notepad Displays the Add new screen for Notepad.
Voice memo recorder Displays the New record screen for Voice memo.
Currency Displays the Currency screen.
Dictionary Displays the Dictionary screen.
No. Desktop icon Options menu
1 Edit title Edits the title of the highlighted desktop icon.
2 Delete one Deletes the highlighted desktop icon.
3 Delete all Deletes all the manually created desktop icons.
Icon name Image Description
23
Settings (M1)
Settings (M1)
Phone (M11)
☛ 1 1
No. Phone
1 Voice volume Adjusts the sound volume output from the earpiece.
☛Use ▲ ▼, Side keys or alphanumeric keys (0 to 9) to adjust the volume.
2You can also press the Side keys to display the volume control screen and to adjust the volume setting.
2During a call, you can press the Side keys to adjust the setting of the volume as required.
2When you change this setting while a headset is connected, the changed volume will be valid only when you have a
headset connected.
2While using a Bluetooth headset, you cannot change the volume.
2 Answer options 1 Any key answer On: Any key (except , SK2, the Side keys) is valid to answer a call.
Off: Only and SK1 are valid to answer a call.
2 Ring silencer On: Pressing one of the Side keys stops the ringer sound and the vibrator while receiving a
call with the phone closed.
2This function cannot be used if the Side keys are locked.
3 Fold answer On: You can answer an incoming call by opening your phone.
3 Side key Disable: Side keys are locked while your phone is folded.
2You can also lock/unlock the Side keys by pressing and holding on the standby screen.
4ALS setup ,The Alternate Line Service (ALS) facility is SIM card and network dependent.
If your SIM card supports ALS, you can setup which line to use for Outgoing call or Voice mail.
24 Settings (M1)
Phone modes (M12)
Your phone can be set to one of the following modes: Normal mode, Meeting mode, Pocket mode or Car mode.
,Any changes made to the settings while in a particular mode will be stored and used when that mode is selected again.
Selecting your phone mode
☛▲ or 1 2 ➔ Press the appropriate key for the required mode.
2You can also set the Meeting mode or return to the previous mode by pressing and holding ▲ on the standby screen.
Editing the mode settings
☛▲ or 1 2 ➔ Highlight the required mode ➔ SK1 ➔ Press the appropriate number for the required setting in the following table.
5Clock 1 Show clock Sets to display the local time, both the local and remote times or no time on the main-LCD.
2Set time Sets the time for the local or remote time.
3Set date Sets the date.
4Set date format Selects the date display format.
5 Set time format Selects the time display format from 12 hour or 24 hour.
6 Set timezone Sets the timezone. (A ✔ is placed on the currently selected timezone.)
☛Highlight the required timezone ➔ Press SK1 to save the change.
2If the highlighted timezone has Daylight Saving, a check box will be displayed at the
bottom of the screen. Press to activate (✔)/deactivate the setting.
7 Set start day Selects whether to start the week on Sunday or Monday.
2This setting affects the functions related to the day of the week, such as Scheduler. (See
“Scheduler (M84)” on page 68 for details.)
6 Language Selects the language the phone displays.
2When you have switched the language to be displayed, please wait until the new setting becomes active.
7LED Selects the Light Emitting Diode (LED) colour for incoming calls/SMS/MMS (including Email) or during a call.
2If the personal setting or the Group setting for the LED colour is also set in the phonebook, it has priority over this
LED setting. (See “Allocating a LED colour” on page 62 for details.)
8 Earphone type Selects the earphone type from Stereo or Monaural, depending on your earphones (headset).
No. Phone
25
Settings (M1)
2For any volume setting, use ▲ ▼, Side keys or alphanumeric keys (0 to 9).
2When you change this setting while a headset is connected, the changed volume will be valid only when you have a headset connected.
No. Phone mode setting
1 Ringer Selects the Sound, Video or MP3 for incoming calls. (See “Sounds (M22)” on page 31, “Videos (M21)” on
page 31 or “MP3 (M24)” on page 34 for details.)
2If the Video is set, it will sound and will be displayed regardless of the CLI picture/video setting for the personal
data in Phonebook. (See “Allocating a picture or video as a CLI” on page 62.)
2 Ringer volume Sets the sound volume for incoming calls.
2While receiving a call with your phone open, the ringer volume can also be adjusted by pressing the Side keys.
2While using a wired headset, you can set the volume for the wired headset. The volume settings for the wired
headset and the speaker of the phone are saved individually.
2While using a Bluetooth headset and a Bluetooth hands-free kit, however, the volume setting for the speaker
of the phone is used.
3 SMS tone Selects the ringtone for incoming SMS messages. (See “Sounds (M22)” on page 31 for details.)
4 SMS tone volume Sets the sound volume for incoming SMS messages.
5 MMS tone Selects the ringtone for incoming MMS or Email messages. (See “Sounds (M22)” on page 31 for details.)
6 MMS tone volume Sets the sound volume for incoming MMS or Email messages.
7 Key tone Turns on/off the key tone.
8 Service tone Turns on/off the service tone.
9 Alarm volume Sets the sound volume for Clock alarm and Schedule alarm.
0Vibrator Turns on/off the vibrator function.
Earphone setting Selects the sound output from Earphone & Speaker or Earphone.
2This option affects the headset.
26 Settings (M1)
2If the selected mode is Car mode, the backlight will always be turned on. This will accelerate the battery consumption.
Main-LCD (M13)
☛ 1 3
2nd-LCD (M14)
☛ 1 4
# Auto answer Selects whether to answer an incoming call automatically.
2To use the Auto answer function, connect the headset to your phone and set the earphone volume to 1 or
higher. If the earphone volume is set to 0, you must turn the vibrator ON to use the Auto answer.
2The Auto answer function only applies to the first incoming call. When you have another incoming call, you
have to answer it manually.
No. Main-LCD
1 Greetings Selects the greeting which is displayed on the main-LCD during phone start-up from No greeting, Text or Animation.
☛If you select Text greeting, press SK1 to edit the greeting text. Key in a greeting text and press .
2 Wallpaper Selects a picture or video file to use as the background for the main-LCD.
3 Main menu style Selects and resets the background for the Main menu screen.
4 Colour style Selects the phone’s colour theme.
No. 2nd-LCD
1 Clock/Event display Selects which items to display on the 2nd-LCD from Clock & Event, Clock only, Event only or Off.
2 Wallpaper Selects a picture file to use as the background for the 2nd-LCD.
3 Clock selection Selects the type of clock to be displayed on the 2nd-LCD.
4 Incoming call No. Turns on/off the function to display the incoming call number on 2nd-LCD.
5 Contrast Sets the contrast level of the 2nd-LCD.
☛Use ▲, ▼ or Side keys to adjust the contrast. The contrast gauge is displayed on the 2nd-LCD.
No. Phone mode setting
27
Settings (M1)
Power saving (M15)
☛ 1 5
2If the selected mode is Car mode, this function is displayed in gray and is not available.
Calls (M16)
☛ 1 6
/For settings provided on the Calls screen, see “Call settings (M16)” on page 13.
No. Power saving
1 Level setting Selects the power saving level from Level 1 (minimum power save setting), Level 2 (moderate) or Level 3 (maximum).
2The main-LCD backlight will turn dim and then turn off after a given amount of time with no operation.
2When the phone is folded, Power saving level also applies to the 2nd-LCD.
2 Function key LED Selects whether to flash the LED of SK1 and SK2 when the main-LCD and its backlight are turned off.
2If the selected mode is Car mode or the camera view finder screen is displayed, the main-LCD backlight will always
be on.
28 Settings (M1)
Security (M17)
☛ 1 7
The security settings will help to protect your phone from improper and unauthorized use. You may be required to enter one of the five codes (shown below). When the
phone prompts you for one of these codes, key in the appropriate number.
•PIN code (provided by your network service provider to protect your SIM card if it is stolen)
•PIN2 code (provided by your network service provider for charge information and Fixed dialling services protection)
•PUK code (personal unblocking key in case you forget PIN code)
•PUK2 code (personal unblocking key in case you forget PIN2 code)
•Security code
,If you forget any of these codes, ALWAYS contact your service provider as they are the ONLY source for your codes.
PIN code
Your phone can be set up so that your PIN code must be entered at power up before the phone can be used at all. If the PIN code is not entered, not even incoming
calls can be answered. Entering your PIN code incorrectly 3 times (not necessarily in the same session) will invalidate the correct PIN code. In such a case you will
have to contact your service provider for a PUK code to unblock your SIM card.
2Some SIM cards are set up so that PIN number entry cannot be turned off.
2When SIM PIN lock is enabled, you can change the PIN code.
PIN2 code
Your phone supports advanced feature that may require a PIN2 code to be entered before they can be accessed or modified. Entering your PIN2 code incorrectly 3
times (not necessarily in the same session) will invalidate the correct PIN2 code. In this case you will have to contact your service provider for a PUK2 code.
,The PIN2 code is SIM card related and may only be available from your service provider.
No. Security
1 Change PINs Changes the PIN or PIN2 code (PIN activate setting must be turned on to change the PIN code).
2 PIN activate Turns on/off the PIN code entry required at starting up the phone.
3 Change security code Changes the security code which is used to set some of functions and unlock the Personal Information
Manager (PIM) features.
2The default setting of the security code is “0000”.
29
Settings (M1)
Network (M18)
☛ 1 8
/For settings provided on the Network screen, see “Roaming” on page 15.
Connection profile (M19)
☛ 1 9
/For settings provided on the Connection profile screen, see “Setting the Connection profiles” on page 52.
4 Phone lock Turns on/off the Phone lock function which will lock the phone: you can only make emergency calls or enter the
security code. After entering the correct security code, you can use the phone normally.
2Upon power-up, you are prompted to enter the security code if the Phone lock was active when the phone
was powered down.
5 Bar calls You can bar the following calls made/received on your phone: all outgoing (dialled) calls, international outgoing
(dialled) calls, international outgoing (dialled) calls except to home, all incoming (received) calls or Incoming
(received) calls when roaming.
,Bar calls facilities are network services and may require a password.
1 Change settings ☛Highlight the type of restriction and the call type, and then ➔ to save
changes.
☛Key in your bar calls password to verify user identification to the network ➔
SK1 to confirm and save changes to the network.
2The selected settings have red bars over their icons.
2 Set password Changes the bar calls password.
6 Fixed dialling Turns on/off the fixed dialling which restricts the use of dialled number to only the Fixed Dialling Numbers (FDN).
,The FDN facility is network dependent.
/See also: “Fixed dialling numbers (FDN)” on page 58.
No. Security
30 Settings (M1)
Reset settings (M10)
☛ 1 0
This function will reset your phone to its factory settings.
,By restoring the factory settings, any changes you have made to your phone EXCEPT the following will return to the factory settings (the following data/
settings will not be reset):
•Settings: Set time for Local time, Set date, Language, all settings in Calls other than Auto redial, all Security settings other than Change security code, SIM list
settings in Network.
•Call history: Information in Charge info.
•Phonebook: All Phonebook entries. The settings for Groups.
•Accessory: All Schedule, ToDo, Notepad and Voice memo entries. All the settings other than Clock alarm, Play list for MP3 player, View events for Scheduler,
Sort for ToDo, and Timer setting and My phone settings for Bluetooth.
•Monternet: All Bookmarks, Saved pages and WAP alerts. All the WAP related settings.
•Java™: All the Java™ applications.
•Message: All the stored messages. The settings for SMS centre, Validity period for SMS and Language for Cell Broadcast.
•My favorites: All stored files.
31
My favorites (M2)
My favorites (M2)
Using My favorites, you can playback sound and MP3 files, or display pictures and videos downloaded from the Internet or captured with the camera function of your
phone.
Videos (M21)
In the following section, how to playback video files (videos) stored in your phone is described. You can either record videos using your phone, download them from
the Internet, receive them attached to messages. There are two pre-set folders: My Movies and Download.
Replaying the video files
☛▼ 1 or 2 1 ➔ Highlight a folder ➔ or ➔ Highlight a video file you wish to replay ➔ or ➔ The video file will be replayed.
2When the flat view function is activated, the list of folders is not displayed. The list of all the stored video files is displayed.
2If you wish to move to another hierarchy folder, use and
2Pressing # on the video preview screen will enlarge the replay screen size, and pressing # again will return the screen size to normal for Sub-QCIF only.
2For the definitions of the icons displayed while replaying, see “LCD and displayed icons” on page vii.
Operations while replaying video
☛To stop, SK2
☛To pause, SK1 ➔ While pausing, SK1 again to restart and continue the replay.
☛To fast forward/rewind, or ➔ SK1 or will stop the fast forwarding/rewinding.
☛To enlarge the replay screen size, # for Sub-QCIF only
☛To adjust the volume, Side keys
☛To display the previous/next file, ▲ or ▼
2You cannot fast forward, rewind or enlarge the screen for video files with only sound but no image.
Sounds (M22)
In the following section, how to playback sound files stored in your phone is described. There are three pre-set folders: Download, Preset and Voice memo.
Selecting and playing sound
☛▼ 2 or 2 2 ➔ Highlight a folder ➔ or ➔ Highlight a sound file you wish to replay ➔ or
2When the flat view function is activated, the list of folders is not displayed. The list of all the stored sounds files is displayed.
▼
▼
▼
▼
▼
▼
▼
▼
32 My favorites (M2)
2If you wish to move to another hierarchy folder, use and
Operations while playing sound
☛To stop, SK2
☛To adjust the volume, Side keys.
☛To replay the previous/next file, ▲ or ▼
Pictures (M23)
The Pictures function allows you to display images and animations, which were obtained with the camera function of your phone, received as a file attached to MMS
messages, or downloaded from the Internet. The images can also be edited using this function. From the Pictures function you can also attach images and animations
to messages you compose. There are six pre-set folders: Photo, Download, Preset, Frame, Stamp and MMS card.
Displaying the Pictures view screen
☛▼ 3 or 2 3 ➔ Highlight a folder ➔ or ➔ Highlight an image file you wish to display ➔ or
☛To display the previous/next image file, ▲ or ▼
2When the flat view function is activated, the list of folders is not displayed. The list of all the stored image file is displayed.
2If you wish to move to another hierarchy folder while the Thumbnail view is turned off, use and
Cutting the image
☛Highlight or display the image file you wish to edit ➔ 1 3 ➔ Select the image size ➔ A frame indicating the cut area appears on the preview screen.
☛Move the frame position ➔ ➔ SK1 if the image is favorable
2When you select Free, a cross indicator appears on the preview screen. Move it to the point to start a frame and to confirm the position. Then, expand the
frame into the required size and to confirm.
Reducing the image size
☛Highlight or display the image file you wish to edit ➔ 1 4 ➔ Select the image size ➔ SK1 if the image is favorable
Rotating the image
☛Highlight or display the image file you wish to edit ➔ 1 5 ➔ SK1 to rotate the image 90 degrees clockwise.
☛Keep pressing SK1 until the image is at the required angle ➔ to confirm
Decorating the image with stamps
☛Highlight or display the image file you wish to edit ➔ 1 6
▼
▼
▼
▼
▼
▼
33
My favorites (M2)
☛To apply a marker stamp, 1 ➔ Highlight the required stamp ➔ ➔ The marker stamp position is displayed in centre
2If you wish to preview the highlighted stamp, press SK1. To display the previous/next stamp, ▲ or ▼.
☛To apply a text stamp, 2 ➔ Key in the text ➔ ➔ The text stamp position is displayed in centre
☛Move the stamp position ➔ to confirm ➔ The stamp preview is displayed again. Repeat applying if necessary, or to select another stamp.
☛SK1 when finished applying the stamp (the stamp preview will not be applied this time)
Adding a frame to the image
☛Highlight or display the image file you wish to edit ➔ 1 7 ➔ Highlight a frame ➔ to preview the resulting image ➔ Scroll through the various frames
by ▲ and ▼ ➔ to confirm.
Saving the edited image
☛After any edition, SK1 or to save the edited image ➔ Select the Save Quality
2SK1 to check the expected size of the image.
☛Edit the name (if required) ➔
Printing an image using a printer
You can print an Exif format image file by connecting your phone to a PictBridge compatible printer using a USB cable.
2There may be PictBridge compatible printers that cannot be connected to your phone.
2Refer to the operation manual of the printer for details on the printing.
☛▼ 3 or 2 3 ➔ Highlight a folder ➔ or ➔ Highlight an image file you wish to print ➔ 2 4
2“Print via USB” may be displayed in gray and unavailable, depending on the image file.
☛Connect your phone and the printer with the USB cable ➔ Prepare the printer ready for printing, referring to its manual
☛Check the print detail screen displayed
☛To print as seen on the detail screen, SK1
☛To edit the print detail and then print, on the print detail screen to display the Options menu ➔ Edit the detail using the Options menu ➔ SK1
2The Options menu may change depending on the connected printer.
2If any interruption or error occurs, or the printing is not completed normally, pull out the USB cable and start again from the first step.
No. Print via USB Options menu
1 Number of prints Sets the number of prints to output.
2 Layout detail Selects the paper size, paper type and layout to print the image file.
3 Print quality Selects the required quality of printing.
▼
34 My favorites (M2)
MP3 (M24)
In the following section, the procedures to display and play your MP3 files are described. There is one pre-set folder: Download.
Selecting and playing an MP3 file
☛▼ 4 or 2 4 ➔ Highlight the MP3 file you want to play ➔ or
2When the flat view function is activated, the list of folders is not displayed. The list of all the stored MP3 files is displayed.
2To create your own playlist, see “MP3 player (M81)” on page 66.
Operations while playing an MP3 file
☛To stop, SK2
☛To adjust the volume, Side keys.
☛To replay the previous/next file, ▲ or ▼
Java™ (M25)
☛For the functions available on Java™, see “Java™ (M25)” on page 37.
4File name Selects whether or not to print the file name on the paper.
5Date Selects whether or not to print the date on the paper.
No. Print via USB Options menu
▼
35
My favorites (M2)
File selector Options menu
☛Display the Videos/Sounds/Pictures/MP3 list screen ➔
No. File Selector Options menu
1 Edit item Rename item: Edits the file/folder name of the selected file/folder.
Set protection: Sets the protection settings of the selected folder or file on/off.
Cut: Cuts the selected picture into Sub-QCIF (128x96), QCIF (176x144), Main-LCD (176x220), 2nd-LCD
(128x128) or Free.
Reduce: Reduces the selected picture to fit within Sub-QCIF (128x96), QCIF (176x144), Main-LCD (176x220)
or 2nd-LCD (128x128).
Rotate: Rotates the selected picture.
Stamp tool: Adds a marker or text stamp on the selected picture.
Frame: Sets a frame to the selected picture.
2You cannot use the Cut and Rotate functions for SXGA.
2You can only use the Stamp tool and Frame functions for Sub-QCIF, QCIF and Main-LCD.
2 Use item (Videos) Set as ring tone: Sets the selected video to be the ringer tone.
Set as wallpaper: Sets the selected video to be the main-LCD wallpaper.
IR send: Sends the selected video through the IR port to other devices or a cellphone.
2 Use item (Sounds) Set as ring tone: Sets the selected sound to be the ring tone.
Set as SMS tone: Sets the selected sound to be the SMS tone.
Set as MMS tone: Sets the selected sound to be the MMS tone.
IR send: Sends the selected sound through the IR port to other devices or a cellphone.
2 Use item (Pictures) Set as wallpaper: Sets the selected image to be the main-LCD or 2nd-LCD wallpaper.
Add desktop icon: Creates a desktop icon for the selected image on the standby screen.
IR send: Sends the selected image through the IR port to other devices or a cellphone.
Print via USB: Prints the selected image file using a PictBridge printer via USB cable (see page 33).
2 Use item (MP3) Set as ring tone: Sets the selected MP3 to be the ring tone.
IR send: Sends the selected MP3 through the IR port to other devices or a cellphone.
3 Create message Creates a new message with the file attached.
2This function is not available for the MP3 files.
4 Delete item Deletes the selected file and folder.
5 Delete all Deletes all the files in the current list.
36 My favorites (M2)
2Depending on the conditions, some options may be displayed in gray and not be available.
2Depending on the size of the data, file selector operation may take a long time.
2Neither protected data nor preset data and folders can be deleted or moved.
6 Copy item Copies the selected file or folder to the selected folder.
7 Copy all Copies all the files in the current list to the selected folder.
8Move Moves the selected file/folder or all the files in the current list to the selected folder.
9 Create folder Creates a new folder under the current folder.
0 Storage detail Displays the current storage information of your phone memory.
View detail Displays the details of the selected folder or file.
2You can also display the details on the highlighted folder or file by pressing without displaying the Options menu.
# Options Sorting order: Sorts the files by date, alphabetically, or by the number of Chinese strokes.
Info column: Sets whether to display the column on the list screen, and the information to be shown there.
None: No column showing
Size: Approximate size of the file
Type: File type
2You can also change the information on the column by pressing # without displaying the
Options menu.
Thumbnail view: Displays the files as thumbnails.
Flat view: Displays the list of all the stored files regardless of the folder hierarchy.
List display: Sets whether to display the user title or the file/folder name.
Title: Displays the user title.
File name:Displays the file/folder name.
Save options: Saves the current option settings.
Reset options: Resets the option settings.
No. File Selector Options menu
37
Java™ (M25)
Java™ (M25)
You can download Java™ applications (games etc.) from WAP sites and run them on your phone.
Applications (M251)
How to run software
To run a software (Java™ application), perform the following.
☛▼ 5 or 2 5 ➔ 1➔ Highlight an application containing the software you want to run ➔ or
2When you display the Java™ applications list screen for the first time after downloading a program(s), it may take a while for your phone to verify the program(s).
A message will be displayed during this process, and you may activate the program(s) after it is completed.
,After downloading the software, always make sure that you check the downloaded program is displayed in the Applications screen.
,Do not remove the battery while the software is running as data to that point may not be saved.
Applications Options Menu
☛▼ 5 or 2 5 ➔ 1 ➔ Highlight an application containing the software you want to run ➔ SK1
Network setting (M252)
You can select the connection profile for the Java™ application software to connect to the network.
☛▼ 5 or 2 5 ➔ 2 ➔To display the Web profiles screen, 1, or to display the Connection profile screen, 2 (see “Setting the Connection profiles” on page 52
for details).
2This setting is only effective for on-line applications.
No. Applications Options menu
1View info Displays the information of the selected application.
2 Delete current Deletes the currently highlighted Java™ application.
3 Delete all Deletes all the applications.
4 Security setting Displays the security setting of the highlighted application.
▼
38 Java™ (M25)
Resident setting (M253)
Some Java™ applications can be used on the standby screen. The application will activate automatically after you display the standby screen and not operate the phone
for the set the resume time. Then, if you still do not operate the phone after the set suspend time, the application will change to the suspend mode.
Selecting the resident Java™ application (M25311)
☛▼ 5 or 2 5 ➔ To display the Resident On screen, 3 1 ➔ 1 (Application) ➔ Highlight the required software ➔
Setting the resume/suspend time (M25312/M25313)
☛▼ 5 or 2 5 ➔ To display the Resident On screen, 3 1 ➔ 2 (Resume time) or 3 (Suspend time) ➔ Appropriate key for the required time
Storage info (M254)
You can display the number of Java™ applications currently stored in your phone and the size of free memory.
☛▼ 5 or 2 5 ➔ To display the Storage info screen, 4
Access to Java™ download site (M255)
You can download desired Java™ applications from Java™ download sites.
☛▼ 5 or 2 5 ➔ 5 ➔ Highlight the desired application ➔ SK1 ➔Check the application details ➔ To start downloading, SK1
2After downloading a Java™ application, make sure to check that the downloaded program is displayed in the Java™ application list screen.
2Up to 20 applications can be downloaded. If you wish to download a new application when there are already 20 downloaded applications in your phone, delete
an application in advance.
39
Message (M3)
Message (M3)
Message overview
Message services
Your phone supports the following messaging services:
• Short Messaging Service (SMS) allows you to send short messages (160 half-pitch characters max.) to one or more phone numbers. To send an SMS message,
the destination phone number must be a mobile phone with an SMS service subscription. SMS service also supports Enhanced Messaging Service (EMS) for which
the maximum length of the message you can send depends on the number of linked messages (maximum of 10 linked messages are available).
•Email allows you to send messages with attachments to not only other cellphones but also to PCs and other devices that use Email addresses. Attachable files
include texts, sounds, pictures, animation, and videos. There are two types of Email server: POP3 server is used when receiving Email messages and SMTP server
is used when sending Email messages.
• Multimedia Messaging Service (MMS) is a service that allows you to send messages with multimedia files attached. You can attach image, sound and video files
to an MMS message. When you receive an MMS message, you will be notified by a message from the MMS centre. You can either automatically or manually
receive the contents of an MMS message.
,The Message Services are network dependent.
Sending/Receiving messages
While a message is being sent or received, a name (if a name has been stored with the number in your phonebook) or a number will be displayed. The received
messages are stored on the SIM card or in your phone memory. When you receive a message, your phone will ring, the message icon will be shown on your phone’s
display and its LED will glow.
2Please delete the unnecessary messages in the folders from time to time. The phone cannot receive any messages when the Inbox folder is full.
Message screen
☛Press SK1 or 3 to display the Message screen
☛To create a new message, press SK1
☛To check for new Email, press SK2
☛To display the list of messages in each folder, press the appropriate key for the required folder
No. Message screen menu
1 Inbox The received messages are stored here.
2Drafts The messages currently being edited are stored here.
40 Message (M3)
2If there is no message in a message list, the list will be displayed in gray and you cannot select it.
Reading a message (M31)
☛To display the Message view screen of a new message, press SK1 or 3 ➔ Press 1 ➔ Highlight the new message ➔
☛The new (unread) messages are displayed in bold. If the message cannot be displayed in one page, use ▲ and ▼ to scroll through the message.The following
icons will be displayed.
3 Outbox The messages that failed to be sent are stored here.
4Sent The sent messages are stored here.
5 Alert inbox The received alert messages are stored here.
2You can also display the received alert messages by pressing 4 4 1 from the standby screen.
6CB The received broadcast messages are saved. See “Cell broadcast (M36)” on page 50 for details.
7, 8 Folder1/Folder2 The messages moved by Move msg (see “Message list Options menu” on page 43) are stored here.
Icon type Icons Descriptions Icon type Icons Descriptions
Message
type icons MMS message with no attachment Read / Unread
status icons New / Unread message(s)
MMS message with attachment Read message(s)
MMS message on the server Filtering status
icons SMS messages filtered by status (incomplete)
MMS delivery report SMS messages filtered by location (SIM)
SMS message SMS messages filtered by location (the phone memory)
Incomplete SMS message Filtered SMS messages
Email message with no attachment Filtered MMS messages
Email message with attachment Filtered Email messages
Sorting
status icons Messages sorted by Date MMS priority
icons MMS message with high priority
Messages sorted by Name MMS message with low priority
Messages sorted by Read/Unread status Sent message
status icons Sent but failed message
Messages sorted by Size Sent message
Messages sorted by Ascending order Storing location
icons Highlighted message stored in SIM
Messages sorted by Descending order Highlighted message stored in the phone memory
No. Message screen menu
41
Message (M3)
Options menus
Message Options menu
☛SK1 or 3 ➔
No. Message Options menu
1 SMS settings 1SMS centre Edits the SMS centre number (this number is saved in the SIM card).
2 Auto display Turns on/off the automatic display function that displays the received SMS messages automatically.
3 Receipt request Selects whether to request a receipt of the sent SMS messages.
4Max linked
msgs Sets the maximum number of linked SMS messages. This function divides an SMS with the message text
exceeding the maximum number of characters allowed into multiple messages.
5 Validity period Selects the period of time an SMS message is stored at the SMS centre, while trying to deliver the message.
2 MMS settings ☛To display the Msg settings screen, press 1.
1 Delivery report Sets the status of delivery.
1 Receipt
request Sets to request a receipt of the sent MMS message.
2 Auto send Sets to automatically send out a receipt for the received MMS message.
2 Auto receive Selects whether to receive the MMS messages manually or automatically.
3 Validity period Selects the period of time an MMS message is stored at the server, while trying to deliver the message.
☛To display the MMS profiles screen, press 2.
–Connection
profile Sets the Internet connection for sending or receiving MMS messages. See “Setting the Connection profiles”
on page 52.
–Enter MMS
centre Edits the MMS centre address.
3 Email settings Changes the settings for the Email messaging function.
1,2 Account1/
Account2 Sets the Email account for two different Email addresses.
1 Account
details Sets Mail, Name, Email address, or Reply to address.
42 Message (M3)
3 Email settings
(Continued) 1,2 Account1/
Account2
(Continued)
2POP3 Sets POP3 server to receive the Email messages.
1 POP3 server Sets POP3 server address to receive Email messages.
2POP3 port
override Sets the POP3 port number.
3 Leave on server Selects whether to leave the downloaded Email message on the
server or not.
4Login Sets the POP3 user ID and password to login to the account.
3SMTP Sets the SMTP server to send the Email messages.
1SMTP server Sets the SMTP server address to send Email messages.
2SMTP port
override Sets the SMTP port number.
3 Authentication Sets the authentication to on or off.
4Login Sets the SMTP user ID and password to login to the account.
2You can also set them the same as those of POP3.
3 Default account Sets the default accounts for sending and checking the Email messages.
4 Send option Selects whether to send an Email message immediately or later.
5Received
message size Sets the maximum size to download an Email message.
6Connection
profile Sets the Internet connection for sending or receiving Email messages. See “Setting the Connection profiles”
on page 52.
4 CB settings 1 Enable 1 to receive none, 2 to receive all, or 3 to specify a list or Cell Broadcast Message Identifier (CBMI) to
receive broadcast from.
2 Languages Selects which language(s) to receive the cell broadcast messages in.
5View msg
status Displays the information on the number of messages in the phone, the size of used/free memories, SMS units in the phone/SIM, and
complete/incomplete SMS units.
6 Rename folder Renames Folder1 and Folder2.
7View all Displays all the messages in all folders on the same list.
No. Message Options menu
43
Message (M3)
,The receipt request, linking of SMS messages and delivery report facilities are network dependant.
2Depending on the selected folder, some options may be displayed in gray and not be available.
Message list Options menu
☛Display the message list in the Inbox, Drafts, Outbox, Sent, Alert inbox, CB, Folder1 or Folder2 ➔
2Depending on the selected folder, the menu number and available options may vary.
2Depending on the selected folder, some options may be displayed in gray and not be available.
8Msg filter Sets the type(s) of messages to be displayed by selecting the desired filter option.
No. Message list Options menu
1Reply Replies to the sender of the highlighted message.
2 Reply all Replies to the sender and all other recipients of the highlighted message.
3 Delete Deletes the highlighted message.
4 Delete all Deletes all the messages in the current folder.
5 Forward Forwards the message text of the highlighted message.
6 Msgs/page Selects either to display 3 or 7 messages in one screen.
7 Move msg Moves the highlighted message to Inbox or Folder1/2, or copies to SIM/Phone.
8Sort msg By: Sorts the messages by date, name, read/unread status or size.
Order: Sorts the messages in ascending or descending order.
Method: Sorts the messages alphabetically or by the number of Chinese strokes.
9Search Searches messages alphabetically or by the number of Chinese strokes.
2To switch the search method, change Method in Sort msg.
0 View details Displays the detailed information on the highlighted message.
– Add desktop icon Creates a desktop icon of the sender or recipient of the highlighted message (Inbox, Sent, Folder1/Folder2, and Drafts only).
–Edit Edits the highlighted message (Drafts and Outbox only).
– Resend Resends the highlighted message in the folder (Outbox only).
The entire message or only the packets that failed to reach the recipient(s) can be resent.
No. Message Options menu
44 Message (M3)
Message view Options menu
☛Display the message list in the Inbox, Drafts, Outbox, Sent, Alert inbox, CB, Folder1 or Folder2 ➔ Highlight a message ➔ ➔
2Depending on the conditions, some options may be displayed in gray and not be available.
2The reply facility uses the phone number of the person who sent the message.
2The Save object Options menu will be displayed only if an object is highlighted.
Option mode Options menu
☛Display the message list in the Inbox, Drafts, Outbox, Sent, Alert inbox, CB, Folder1 or Folder2 ➔ Highlight a message ➔ ➔ 0 / / to highlight a
phone number, Email address, URL or attached file in the message ➔
The columns show the menu numbers for P: Phone number highlighted, E: Email address highlighted, U: URL highlighted and A: Attachment highlighted.
2When an object in the Email is highlighted, the Message view Options menu with menu No. 0 as View mode is displayed.
No. Message view Options menu
1Reply Replies to the sender of the highlighted message.
2Reply all Replies to the sender and all other recipients of the highlighted message.
3Delete Deletes the highlighted message.
4 View details Displays detailed information on the highlighted message.
5Forward Forwards the message text of the highlighted message.
6 Save object Saves the highlighted object to a folder in My favorites.
7 Attachments Displays the list of attached files.
8 Move msg Moves the highlighted message to Inbox or Folder1/2, or copies to SIM/Phone.
9 Highlight mode Activates the Highlight mode (see “Highlight mode” on page 50 for details).
0 Option mode Activates the Option mode to highlight the phone number, Email address, URL or attached file.
Add desktop icon Creates a desktop icon of the sender or recipient of the highlighted message.
P E U A Option mode Options menu
11–– Add to phonebook Adds the highlighted phone number or Email address to a phonebook.
2––– Dial phone number Dials the selected phone number.
––1– Add to bookmark Adds the highlighted URL to the bookmarks.
––2– Launch browser Activates the web browser to access the highlighted URL.
▼
▼
45
Message (M3)
Creating a message
☛SK1 twice/press and hold SK1/ 3 and SK1
☛1 to create a new SMS, 2 to create a new MMS, or 3 to create a new Email
☛To address the message, highlight the To field ➔ ➔ Input the required phone number or
Email address ➔
2To scroll the phone numbers in the To field, or
☛To key in the message, highlight the Message field ➔ ➔ Key in the message ➔
2Pressing while keying in the To/Message field displays the Message edit Options menu
screen.
☛SK1 to send the message
2When you are in the ABC (normal text) mode, any word entered that is not in the T9® dictionary
will be added automatically.
2When you are keying in your message, press SK1 to change the text entry mode.
2If you display another screen or receive a call while you are editing a message more than 1
character, the message will be saved automatically in Drafts.
Message composer Options menu
To/Subject field Options menu
☛ SK1 twice/press and hold SK1/ 3 and SK1 ➔ Press 1, 2, or 3 ➔ Highlight the To or Subject field ➔
2The columns show the menu numbers for:
• To: The To field highlighted when creating a new SMS/MMS/Email message.
• S: The Subject field highlighted when creating a new MMS message.
32–– Create message Creates a new message with the highlighted phone number/Email address in the To field.
43–– Add desktop icon Creates a desktop icon of the highlighted phone number/Email address.
–––1 Attachments Displays the list of attached files.
5432 View mode Deactivates the Option mode.
P E U A Option mode Options menu
Help area
This area contains the
information on the message.
S indicates the size of the
message equivalent to the
number of SMS messages, and
R indicates the remaining
number of characters
available.
(green) Indicates that an upper case letter will be input next.
(red) Indicates the capital lock.
(no arrow) Indicates that a lower case letter will be input next.
▼
▼
46 Message (M3)
• E: The Subject field highlighted when creating a new Email message.
2Depending on the conditions, some options may be displayed in gray and not be available.
To S E To/Subject field Options menu
1 – –Add/Edit Adds or edits a recipient phone number/Email address in the To field.
– 1 1Edit Edits the subject of a message.
2 2 2 Preview msg Displays the message preview screen.
3 3 3Delete Deletes the highlighted recipient phone number/Email address or subject.
4 4 4 Delete all Deletes all the recipients phone numbers/Email addresses.
5 5 5Save Saves the message in Drafts folder.
6 6 – Phonebook Displays the phonebook list to insert a recipient phone number/Email address (To field only).
7 7 – Resend list Inserts a phone number/Email address from the resend list (To field only).
2You can delete the highlighted phone number from the resend list or the entire resend list by pressing
1 or 2 respectively.
8 8 –Insert Inserts a new recipient phone number/Email address.
9 9 – Address list Displays the recipient(s) of the message (To field only).
– – 6Add item Adds picture, movie, sound, or text to the Email message.
– – 7 Attachments Displays the list of attachments. (See “Email Attachments list Options menu” on page 48 for details).
0 0 8Msg options 2 This option is available only when creating an MMS or Email message.
When creating an MMS message:
1Priority Selects the message priority.
2 Delivery date Sets the delivery date.
When creating an Email message:
1 Send option Selects whether to send an Email message immediately or later.
2 Send account Chooses which account to send the message.
3Priority Selects the message priority.
––Move Moves the highlighted phone number/Email address to the To/Cc/Bcc field.
2 This option is available only when the phone number/Email address is highlighted in the To field list screen.
47
Message (M3)
Message/Slide/Attachment field Options menu
☛SK1 twice/press and hold SK1/ 3 and SK1 ➔ 1, 2 or 3 ➔ Highlight the Message/Slide/Attachment field ➔
2The columns show the menu numbers for:
• S: The Message field highlighted when creating a new SMS message.
• M: The Slide field highlighted when creating a new MMS message.
• E: The Message or Attachment field highlighted when creating a new Email message.
2Depending on the conditions, some options may be displayed in gray and not be available.
S M E Message/Slide/Attachment field Options menu
111Edit Edits the message.
222Preview msgDisplays the message preview screen.
2When previewing an MMS message, it displays the created slides in order from the beginning at the preset
playback time for each.
333 Delete Deletes the highlighted slide or message.
444 Delete all Deletes all the slides or attachments.
555 Save Saves the message in Drafts folder.
6–– Phonebook Displays the phonebook list to insert a recipient phone number/Email address.
7–– Resend list Inserts a phone number/Email address from the resend list.
–6– Insert object Inserts Text, Sound, Still image, Animation, Emoticon or Video into the slide.
–7– Copy Copies the highlighted slide.
☛Highlight the slide you want to copy ➔ 7 ➔ Highlight the place you want to copy the slide to ➔SK1
–8–Move Moves the highlighted slide.
☛Highlight the slide you want to move ➔ 8 ➔ Highlight the place you want to move the slide to ➔SK1
–9–New slide Inserts a new slide just before the currently highlighted slide.
–0–Duration Sets the length of time a slide is displayed when previewing the MMS message.
––6 Add item Adds picture, movie, sound, or text to the Email message.
––7 Attachments Displays the list of attachments. (See “Email Attachments list Options menu” on page 48 for details).
–8 Msg options See “Msg options” on page 46 for details.
48 Message (M3)
Email Attachments list Options menu
☛SK1 twice/press and hold SK1/ 3 and SK1 ➔ Press 3 ➔ Highlight the Attachments/Message field and press 7 or highlight the attachment field and
press ➔
2Depending on the conditions, some options may be displayed in gray and not be available.
Message composer icons
The following icons will be displayed at the bottom of the Message composer screen.
No. Email Attachments list Options menu
1 Add item Adds picture, movie, sound, or text to the Email message.
2 Save item Saves an attachment of the Email message in a folder.
3 Delete item Deletes an attachment from the Email message.
4 Delete all Deletes all attachments of the Email message.
5 Rename item Renames an attachment of the Email message.
6 Copy item Copies the highlighted attachment.
7 Copy all Copies all the highlighted attachments.
8Move Moves the highlighted attachment or all the attachment to another field or folder.
9 Create folder Creates a new folder.
0 Storage detail Displays the storage information.
View detail Displays detailed information on the highlighted attachment.
# Options See “File selector Options menu” on page 35 for details.
Icons Descriptions Icons Descriptions
The plain MMS message MMS message with text(s) and video(s)
MMS message with text(s) MMS message with text(s), picture(s) and sound(s)
MMS message with picture(s) MMS message with picture(s) and sound(s)
49
Message (M3)
Message edit Options menu
☛SK1 twice/press and hold SK1/ 3 and SK1 ➔ Press 1, 2, or 3 ➔ Highlight To or Message field ➔ ➔
MMS message with sound(s) Email message with no text(s)
MMS message with video(s) Email message with text(s)
MMS message with text(s) and picture(s) Email message with no attachment(s)
MMS message with text(s) and sound(s) Email message with attachment(s)
2The number in the icon indicates the number of attachments.
No. Message edit Options menu
1 Text colour Selects the colour of text and background.
2 Text format Selects the font size (small, normal or large) and font style (bold, italics, underline or strikethrough).
3 Text alignment Sets the text alignment (left, centred or right).
4Paste Pastes the text which has been copied onto the clipboard in the Highlight mode.
2This function can be used only when text has been copied or cut in the Highlight mode.
Icons Descriptions Icons Descriptions
50 Message (M3)
2Depending on the conditions, some options may be displayed in gray and not be available.
Cell broadcast (M36)
Cell Broadcast (CB) messages (e.g. weather reports, news) are sent by the network to all phones in a certain area.
☛ 3 6
2The Cell broadcast message display on the standby screen is erased by pressing CLR.
,Broadcast messages service is network dependent. Please contact your service provider for details.
5 Highlight mode Activates the Highlight mode at the cursor position.
2You can also activate the Highlight mode by pressing and holding .
2This function can only be used when text has been entered.
2To toggle the Highlight mode on/off, SK1 and to go back to the normal mode, CLR
☛To display the following Highlight mode Options menu, .
1 Text colour Selects the colour of text and background.
2 Text format Selects the font size (small, normal or large) and font style (bold, italics, underline or strikethrough).
3 Copy Copies the highlighted part of text onto the clipboard.
4Cut Cuts the highlighted part of text.
5Delete Deletes the highlighted part of text.
6Select word Selects (highlights) the nearest word to the current cursor position.
7 Select paragraph Selects (highlights) the nearest paragraph to the current cursor position.
8 Select all Selects (highlights) the entire text.
9 Save to text file Saves the highlighted part of text as a text file.
6 Insert object Inserts Text, Sound, Still image, Animation, Emoticon, or Video into the message at the cursor position.
7 T9 Language Selects the language for T9® text input.
8 Edit settings Sets the Write mode (Insert or Overwrite) and Clear mode (Backspace or Delete).
No. Message edit Options menu
51
Monternet (M4)
Monternet (M4)
To access WAP service, you would need to:
1Apply for WAP service before accessing WAP. You can choose General Packet Radio Service (GPRS) or Circuit Switched
Data (CSD) as the data bearer for WAP access. The connection speed of GPRS is faster than CSD. For more details or
subscription of WAP service, please contact your network service provider.
2Set up WAP service settings in your phone.
What can I download
Your phone supports the downloading of the following different types of content:
•Sound files (including ringer melodies, video sound, etc.)
•MP3
•Pictures
•Animation
•Video
•Java™ applications
/For the handling of the downloaded data, see “My favorites (M2)” on page 31.
/For details on downloading Java™ applications, see “Access to Java™ download site (M255)” on page 38.
2If you have not enough memory left on your phone for the downloaded file, a message will be output and you cannot download the file. Make sure you have enough
memory space before downloading any file.
Web settings
To set up your phone to access WAP information on the Internet, use the following procedures.
Setting your connection profile and homepage
Your phone has been preset with a list of GPRS and CSD WAP proxy of different service provider. Also you can set your favourite URL as the homepage.
To display the list of available connections, you can use the following procedure.
☛ 4 7 1 ➔ ➔ Highlight the required connection name ➔ ➔ SK2
☛Highlight Enter homepage field ➔ ➔ Enter the URL ➔
2You can also choose which type of connection you require: CSD or GPRS. Please contact your service provider before setting.
52 Monternet (M4)
2The connection with a ✔ next to its name will be the connection used when you make a WAP connection.
Setting the Connection profiles
To alter or enter information into a connection (profile), use the following procedure.
☛ 4 7 1 ➔ Highlight Connection profiles field ➔ ➔ Highlight a connection name ➔ to display the Profile options menu.
Adding a new profile
☛To add a new profile, 4 7 1 ➔ Highlight Connection profiles field ➔ ➔ SK1 or 1
☛Key in the proxy title ➔
No. Profile options menu
1 Add new Creates a new profile.
2 Copy Copies the current profile to use it as a template to create a new profile.
3Edit Edits the current profile.
4Delete Deletes the current profile.
No. Profiles settings menu
1 Load preset Chooses a profile to load the settings from.
2 Profile title Sets profile’s name.
3 IP address Sets IP address. If you do not have an IP address, please contact your network provider.
4 Bearer type GPRS: Always connects by GPRS.
CSD: Always connects by CSD.
5 GPRS settings AP name: Edits the address of the external data network you want to connect to, either an IP address or a text string.
User name: Edits your user ID to enable you to log on to the external data network.
Password: Edits your password to enable you to log on to the external data network.
2The GPRS setting will be grayed-out if CSD is set as bearer.
53
Monternet (M4)
☛When you have finished entering or editing the connection information, press SK2. The connection list will be displayed.
2If you select the read-only proxy, Edit function is disabled.
2For more details of profile settings, contact your network service provider.
Setting the CSD linger time
The linger time facility will disconnect a connection that has not been used for a preset amount of time. To set this time delay, use the following procedure.
☛ 4 7 2 ➔ Enter the time delay required ➔ SK1
Web font
You can select the font to be displayed on your phone's screen from Large, Normal and Small.
☛ 4 7 3 ➔ Press the appropriate key for the required font.
Clear cache
If you start a WAP session using the last page visited, the information will be restored from the phone memory. If, however this page has been updated since your last
visit, the updated page will not be displayed. To avoid this possibility, clear the memory by the following procedure:
☛ 4 7 4 ➔ SK1
6 CSD settings Connect type: Selects the connection line type: ISDN or Modem.
Dial-up number: Sets the dial-up number.
User name: Edits your user ID to log on to the external data network.
Password: Edits your password to log on to the external data network.
2The CSD setting will be grayed-out if GPRS is set as bearer.
7 DNS address Dynamic: Sets to use the dynamic DNS server address.
Static: Sets the static DNS server address.
8 Port number HTTP: Sets the HTTP port number.
HTTPS: Sets the HTTPS port number.
9 Authentication Selects the authentication type from Normal or Secure.
0 Usage Displays the name of the application currently used.
No. Profiles settings menu (Continued)
54 Monternet (M4)
Logging on to WAP site
There are three types of WAP connection:
•Connect to a specific URL
•Connect to the homepage of the default connection
•Connect to the last web page connected before
Connect to a specific URL
To connect to a URL specified by yourself, use the following procedure.
☛ 4 5 ➔ Key in the desired URL ➔ to select the typed URL ➔ to browse the site
Connect to the Home page of the default connection
☛ 4 1 (for details, see “Setting your connection profile and homepage” on page 51)
Connect to the last web page visited
☛ 4 6
2When you access the Internet with your phone for the first time or after you cleared the memory, the homepage set for Web/MMS profile will be the page to be
accessed.
Other features
Bookmark
☛ 4 2
☛To display the list of bookmarked pages, 1
☛To reset the bookmarked pages, 2
Snapshot
The Snapshot function allows you to store up to 10 web pages and view them offline.
☛ 4 3
☛To display the list of stored snapshots, 1
☛To delete all the stored snapshots, 2
2The above operation is available only when one or more Snapshot data has been stored.
2To take a snapshot, you need to access the Snapshot screen while browsing a WAP site.
2Stored snapshot data can only be used for the snapshot function.
55
Monternet (M4)
Alert message
☛ 4 4
☛To display the list of received Alert messages, 1
☛To delete all those messages, 2
2You can also display the received Alert messages by pressing 3/SK1 ➔ 5.
NEC Web site
Your phone is also supported by a Web site at www.necdream.com.cn. Access this site from your phone and you can select and download content from the wide variety
available. So, you do not need a PC to take advantages of these great new services.
Further information
For more details, visit www.necdream.com.cn on your PC or your phone.
GPRS dial up
With GPRS dial up service, you can access the Internet or read Emails from your PC through your phone. Use your phone as a modem to connect to a compatible PC
through a PC Link cable (option), Bluetooth or the IR port to enable GPRS Internet dial up service.
For more detailed procedures, please visit our company homepage.
/See also “Bluetooth (M891)” on page 77 and “IR modem (M8922)” on page 81.
2Before using this service, you would be required to subscribe to a GPRS service and buy a PC link cable and CD-ROM.
56 China Mobile in/Customer service (M5/M6)
China Mobile in/Customer service (M5/M6)
China Mobile in
From China Mobile in, you can access the various fun services provided by your network provider, and the SIM toolkit function. Please consult your network service
provider for details.
☛SK2 or 5
Customer service
From Customer service, you can access the customer support centre. Please consult your network service provider for details.
☛ 6
57
Phonebook (M7)
Phonebook (M7)
Phonebook types
Your phone can have up to 7 directories stored on your SIM card and in your phone memory:
•Complete (a list of all the numbers stored in the ADN and FDN)
•Personal directories (ADN) in the SIM card
•Personal directories (ADN) in the phone memory
•Service dialling numbers (SDN)
•Fixed dialling numbers (FDN)
•Own number
•Voice mail number
2When viewing any of the directories described, you can switch to the other directories (if your SIM card supports them) by pressing .
2The maximum number of phone numbers that can be stored on a SIM card is the total of the ADN, FDN and SDN directories.
2When you activate the phonebook, the directory which you were referring to the last time will open.
Personal directory (ADN)
These numbers are known as abbreviated dialling numbers (ADN). There are two types of ADN, one is the phonebook stored in the phone memory
(the phonebook (Phone)) and the other is the phonebook stored on the SIM card (the phonebook (SIM)).
Phonebook (SIM)
•Up to 255 personal data can be stored in the SIM card.
•Each personal data contains a phone number, a name and a location number.
2The number of phone numbers that can be stored on a SIM card depends on the SIM card capability.
Phonebook (Phone)
Up to 500 personal data can be stored in your phone memory. Each personal data is given a location number (1 to 500), and it can be allocated to a group.
To each personal data, you can set the following:
•7 phone numbers (Home, Mobile, Work, Data, Fax, Other phone x 2)
•2 Email addresses
•2 descriptive information
•Group, Voice tag, LED colour, Picture/Video, Ringer and Location number
58 Phonebook (M7)
2Up to 10 phone numbers can have a voice recognition recording allocated to them.
Fixed dialling numbers (FDN)
Fixed dialling numbers are a means of limiting which numbers can be called from your phone. With the FDN feature switched on (see page 29), you can call with your
phone the numbers you have stored in this phonebook and the emergency number only.
,Although FDN is supported by your phone, it must be present on your SIM card - check with your service provider.
Service dialling numbers (SDN)
The numbers stored in the SDN directory are pre-installed by your service provider. They will call numbers and services as agreed with your supplier (e.g. customer
enquiries, billing information, sportslines, weatherlines, etc.) and cannot be edited by you.
,Although SDN is supported by your phone, it must be present on your SIM card - check with your service provider.
Accessing your phonebook (M7)
You can store personal information in the phonebook of your phone or your SIM card.
Displaying a personal data (M71)
☛ 7 1 and the appropriate key for the desired directory or until the required directory is displayed ➔ Highlight the required personal data ➔
Displaying information about your phonebook (M72)
☛ 7 2 to display the information about your phonebook.
2This function is SIM dependent.
Phonebook list screen Personal data screen
SK2
Abbreviated dialing number (ADN)
Abbreviated dialing number (ADN)
59
Phonebook (M7)
Phonebook list Options menu
☛ 7 1 and the appropriate key for the desired directory or until the required directory is displayed ➔ Highlight the required personal data ➔
No. Phonebook list Options menu
1 Add new Adds a new personal data to Phone/SIM/FDN.
2Edit Displays the data edit screen to edit the currently highlighted personal data.
2When editing the data in FDN, you will be prompted to enter PIN2 code.
3 Copy Copies personal data to another phonebook (see “Copying and moving personal data” on page 63 for details).
1 Current copy Copies the currently highlighted personal data.
2 Package copy Copies the selected data in the list.
4Move Moves the currently highlighted personal data to SIM, Phone, FDN, Own number or Voice mail number.
5Delete Deletes personal data.
1 Delete current Deletes the currently highlighted personal data.
2 Delete all Deletes all the data in the list.
60 Phonebook (M7)
6 Groups Editing the group information
☛Highlight the group you wish to edit ➔ SK1 and highlight the required field
☛To rename the group name, select Group name field ➔ Key in the name of the group ➔
☛To set information on the selected group, select Info field ➔ Key in the info ➔
☛To select the LED colour, select LED field ➔ 1 ➔ Highlight the desired colour ➔
☛To select the CLI picture/video, select Picture/Video field ➔ 1 for Picture or 2 for Video ➔ Highlight the desired picture
or video ➔
☛To select the ringer, select Ringer field ➔ 1 for Sound, 2 for Video or 3 for MP3 ➔ Highlight the desired ringtone, video
or MP3 ➔
☛SK1 to set the change
2If the personal settings for the LED colour, CLI picture/video, or the ringer are also set, they have priority over those of
the Group settings.
Group member list screen Options menu
☛Highlight the group you wish to edit ➔ to display the list of group members ➔ Highlight the member ➔
1Call Calls the highlighted member.
2 Create message Creates a new message to the highlighted member.
3 Add new Creates a new phonebook entry to join the group.
4 Add to group Adds a phonebook entry to the group.
5 Remove from
group Removes the highlighted member from the group.
6 Remove and delete Removes the highlighted member from the group and delete the phonebook entry at the same
time.
7 Add desktop icon Creates a desktop icon of the phone number/Email address of the highlighted member.
No. Phonebook list Options menu
61
Phonebook (M7)
2Depending on the conditions, some options may be displayed in gray and not be available.
Making a call or creating a message from the phonebook list
☛Highlight a desired personal data to display the stored numbers or Email addresses in the help area ➔ Use and to display the other stored phone numbers
or Email addresses, if any, in the help area.
☛Press to make a phone call to the displayed phone number, or press SK1 to send a new message to the phone number or Email address
Adding a new personal data
☛ 7 1 and the appropriate key for the desired directory, or until the required directory is displayed ➔ SK2 ➔ Select the directory to which you wish to
store the personal data ➔ Enter the name and other necessary information ➔ SK1 (see “Editing an existing personal data” on page 62).
2You can also input phone numbers on the standby screen and press to add a new personal data.
2It is best to store numbers using the international number format.
7Sort Sorts the personal data in the order of alphabets, location number, or by the number of strokes.
2Sorting may take time depending on the number of personal data entries, the number of characters contained in each
entry and the type of language.
1 Alphabetic Sorts the personal data alphabetically.
2You can jump directly to a name beginning with specific characters by pressing the
appropriate key (e.g. press 5 once to jump to names beginning with J, or twice to jump to
names beginning with K).
2 Location Sorts the personal data in memory location number.
3Stroke Sorts the personal data by the number of Chinese strokes.
8 Location Searches for the personal data by the location number.
☛Key in the desired location number ➔ SK1 to display the Phonebook list screen with the selected personal data
highlighted.
9 Show Displays phonebook information.
1 Summary Displays the summary of phonebook contents.
2 Voice tag list Displays the phonebook entry names with the voice recognition tags recorded.
0IR send Sends the currently highlighted personal data to another device through the IR port.
/See also: “IR send” on page 80.
Add desktop icon Creates a desktop icon of the highlighted personal data.
No. Phonebook list Options menu
▼
▼
62 Phonebook (M7)
Editing an existing personal data
☛ 7 1 and the appropriate key for the desired directory or until the required directory is displayed ➔ Highlight the required personal data ➔ 2
2For the phonebook (SIM) and FDN, only the name, phone number and the location number can be added or edited in the following procedures.
2For the own number and voice mail number settings, only the name and phone number can be added or edited in the following procedures.
Adding/editing phone numbers, Email addresses & personal information
☛Highlight the field you wish to edit or add information to ➔
☛Add the required number or information or make necessary changes to the selected field ➔
☛Highlight another field to make further changes, if required
2You can edit the Name, Phone number, Email address and Info fields by the above method.
Allocating a group
☛Highlight the Group field ➔ ➔ Highlight the group you wish to add the current personal data to ➔
Voice recall functions
Adding a Voice recall recording
☛Highlight the Voice tag field ➔ ➔ 1
☛Say the name you wish to record as a voice tag ➔ Say the name again for confirmation according to the displayed message.
Playing a Voice recall recording
☛Highlight the Voice tag field ➔ ➔ 2
Deleting a Voice recall recording
☛Highlight the Voice tag field ➔ ➔ 3
2Up to 10 voice tags can be stored.
2You can check the number of stored voice tag and list of those tags (see “Summary” and “Voice tag list” on page 61).
Allocating a LED colour
☛Highlight the LED colour field ➔ ➔ 1 ➔ Highlight the desired colour ➔
2The personal setting for the LED colour has priority over the Group setting and phone setting for the LED colour.
Allocating a picture or video as a CLI
You can set a picture or video to be displayed on the screen as a Call Line Identity (CLI) for an incoming call.
☛Highlight the Picture/Video field ➔ ➔ 1 to display the picture list screen or 2 to display the video list screen
☛Highlight the desired picture/video ➔ SK1 to preview the picture/video or to select the highlighted picture/video
63
Phonebook (M7)
2A ✔ is displayed on the icon for which the item is currently selected.
2If an MP3 file is set as a ringer in Phone mode and a CLI video is also set, the default picture, instead of the CLI video, will be displayed with the MP3 file.
2See also: “Ringer” on page 25 and “Pictures (M23)” on page 32.
Allocating sound/video/MP3 as a ringer
You can set a sound, video or MP3 as a ringer for an incoming call. When a video is set, a movie is displayed on the screen with the sound.
☛Highlight the Ringer field ➔ ➔ 1 to display the sound list screen, 2 to display the video list screen or 3 to display the MP3 list screen
☛Highlight the desired sound, video or MP3 ➔ SK1 to preview the file or to select the highlighted file
2A ✔ is displayed on the icon for which the item is currently selected.
2If the video as a ringer is set, it will sound and will be displayed on the screen regardless of the CLI picture/video setting.
2See also: “Sounds (M22)” on page 31.
Allocating a location number
☛Highlight the Location number field ➔ ➔ Key in the desired location number ➔
Saving the edited personal data
☛After editing the required field, SK1 to save the edited data and return to the previous screen.
Copying and moving personal data
☛ 7 1 and the appropriate key for the desired directory or until the required directory is displayed ➔ Highlight the required personal data/list of data ➔
3 to copy or 4 to move
☛For copying, 1 to copy the highlighted personal data or 2 to copy all the personal data in the current list
☛Press the appropriate key for the desired destination (SIM, Phone, FDN, Own number or Voice mail number)
2If you copy or move from phonebook (Phone), the Origin number screen will be displayed to choose which phone number to copy.
2If you copy or move to phonebook (Phone), the Number type screen will be displayed to choose which phone number type to copy to.
☛Key in the desired location number ➔
Personal data Options menu
☛ 7 1 and the appropriate key for the desired directory or until the required directory is displayed
☛Highlight the required data ➔ ➔ Highlight the required field ➔
No. Personal data Options menu
1Call Calls the highlighted phone number.
64 Phonebook (M7)
/See also: “Phonebook list Options menu” on page 59 for the operation of 4 (Edit), 5 (Copy), 6 (Move) and 7 (Delete current).
Voice mail (M717)
Voice mail function enables you to forward received calls to the Voice mail centre, and the caller can leave voice messages in your voice mail mailbox. You may be
notified by an icon on the standby screen if the caller leaves a voice message.
,The voice mail service is network dependent. Contact your service provider for details on your voice mail number.
Setting the Voice mail number
2This function is available when the Voice mail number has not been set.
☛ 7 1 7 ➔ Highlight the required line ➔ twice ➔ ➔ key in the voice mail number ➔ ➔ SK1 to save the change.
Forwarding a call to the Voice mail centre
☛Set the voice mail centre number (see “Setting the Voice mail number” for details) ➔ Set up Call diversion (see “Call diversion (M161)” on page 13 for details).
When you receive a call set to be diverted, the call will be diverted to the voice mail centre.
Retrieving a Voice mail
2This function is available when the Voice mail number has been set.
☛ 7 1 7 ➔ Highlight the required line ➔
2 Create message Creates a new message to the highlighted phone number or Email address.
3IR send Sends the selected personal data to another device through the IR port.
4Edit Edits the selected personal data.
5 Copy Copies the selected phone number(s)/Email address(es).
☛Press the appropriate key for the desired destination (SIM, Phone, FDN, Own number or Voice mail
number) ➔ Key in the desired location number ➔
6Move Moves the currently highlighted personal data.
☛Press the appropriate key for the desired destination (SIM, Phone, FDN, Own number or Voice mail
number) ➔ Key in the desired location number ➔
7 Delete current Deletes the selected personal data.
8 Add desktop icon Creates a desktop icon of the selected personal data.
No. Personal data Options menu (Continued)
66 Accessory (M8)
Accessory (M8)
MP3 player (M81)
This feature allows you to create a Playlist to play MP3 files in the order you desire. You can add MP3 files saved in your phone to the Playlist (see “MP3 (M24)” on
page 34) or change the order of the MP3 files within the Playlist.
☛ 8 1 ➔ SK1 to play ➔ After playing, SK2 to stop.
☛To change the volume, Side keys.
☛To play the previous/next file, ▲ or ▼.
2When there are no MP3 files saved in the Playlist, the Playlist screen will be displayed in stead of the MP3 player screen.
2When you use a headset, you can start or stop playing by pressing the button on it, and play the next file by pressing and holding it.
MP3 player Options menu
☛ 8 1
No. MP3 player Options menu
1Playlist Displays a list of MP3 files in the order in which they are played.
2You can save up to 30 MP3 files in the Playlist depending on the size of each file.
2The MP3 files that are deleted from MP3 of My favorites or erroneous MP3 files are displayed in gray and cannot be played.
☛ to display the Playlist Options menu below, or SK1 to add an MP3 file.
1 Add item Adds an MP3 file in your phone to the Playlist.
2 Move item Moves the highlighted MP3 file in the Playlist.
3 Delete item Deletes the highlighted MP3 file from the Playlist.
4 Delete all Deletes all the MP3 files from the Playlist.
5View detail Displays the properties (file name, title, artist name and recording time) of the highlighted MP3 file.
2Play mode Normal: Plays all the MP3 files in order from top to bottom of the Playlist once.
Repeat all: Plays all the MP3 files in the Playlist repeatedly.
Repeat one: Plays the selected MP3 file repeatedly.
3 Equalizer Selects from Rock, Jazz, Pop and Off to obtain the desired tone.
2The selected Equalizer setting applies to all the MP3 files in the Playlist.
67
Accessory (M8)
2Depending on the conditions, some options may be displayed in gray and not be available.
Calculator (M82)
You can perform addition, subtraction, multiplication and division with the calculator. It also has a memory function.
☛ 8 2
2The calculator can display a result of up to 9 digits. If a calculation results in a number exceeding the maximum, the screen displays error in the calculation field.
Calculator Key Assignment
For calculator function, the keys are assigned different functions. The following shows the key assignment:
2Using the % function, you can calculate (100 + x) % of a figure (e.g. 200 + 5% = 210) and (100 - x) % of a figure (e.g. 200 - 5% = 190).
Clock alarm (M83)
This feature enables you to switch the clock alarm function on/off and to set the time, repetition and alarm tone.
Turning the alarm on/off
☛ 8 3
4 Add desktop icon Creates a desktop icon of the MP3 player function on the standby screen.
Key Operation Key Operation
Addition (+) Subtraction (–)
▲Multiplication (×)▼Division (÷)
Equals to (=) SK2 Memory Store/Memory Addition
SK1 Memory Recall/Memory Cancel (Press twice) Percent (%)
Inversion (±) Exit calculator
Decimal Point (.) CLR Delete digit (if held, all clear)
Clock alarm setting
On/Off Turns on or off the alarm.
Set time Sets the time and am/pm (for 12 hour format) at which the alarm will sound.
No. MP3 player Options menu
▼
▼
68 Accessory (M8)
☛When all settings are done, SK1 to save the setting.
2The selected melody will be played when the alarm occurs if the ringer is turned on based on the current phone mode. If vibration is turned on, you will be notified
of the alarm by vibration.
2Even if the phone has been switched off, the phone automatically switches itself on and sounds the alarm or vibrates at the specified time.
2You can stop the alarm tone or vibration by pressing any key.
Scheduler (M84)
Scheduler enables you to enter reminders and appointments for particular time and date.
Adding a new event
☛ 8 4 ➔ Highlight the day ➔ to display the day’s schedule list screen (if any) ➔ SK1
Set alarm tone Sets the melody to be played when the alarm occurs. See “Sounds (M22)” on page 31.
Alarm repeat Selects alarm repeat for once, daily or day of the week.
2You can select more than one day of the week at the same time.
2You can remove the check by highlighting and pressing again.
Enter alarm text Sets the message (e.g. Wake up!) which is displayed when the alarm occurs (optional).
Scheduler setting
Event date/time Sets the day, month, year, time and am/pm (for 12 hour format) of the event.
Event end date/time Sets the day, month, year, time and am/pm (for 12 hour format) of the end of event.
Description Sets the event description (optional).
Repeat Selects repeat for One time only, Daily, Weekly or Monthly.
Reminder Turns on or off the reminder.
Reminder time Selects the time to set off the reminder prior to the event start time.
Reminder tone Associates a reminder tone with an event.
2You can set the reminder tone only when the Reminder is turned on.
Private Sets the event as a private event.
☛Place a check mark to set the event as a private event. To set the event as a public event, do
not place a check mark.
Clock alarm setting (Continued)
69
Accessory (M8)
☛When all settings are done, SK1 to save the setting.
2The selected melody will be played when the scheduled event occurs if the ringer is turned on based on the current phone mode. If vibration is turned on, you will
be notified of the event by vibration.
2If the phone has been switched off, the phone does not switch itself on to sound the reminder or vibrate at the specified time.
2You can stop the reminder tone or vibration by pressing any key.
2If the event is a private event, the reminder will sound at the specified time but the entered description will not be displayed. You are prompted to enter the security
code to view the details of the private event.
Viewing the scheduled events
☛ 8 4 ➔ Highlight a day (SK1 to display the previous monthly/weekly view screen or SK2 to display the next monthly/weekly view screen)
☛ to display the day’s schedule list screen (To display the previous/next day’s schedule list screen, or ).
☛ to display the detail screen of the highlighted schedule.
Setting the reminder again
☛When the scheduler reminder is set off, or and SK2 to select the time to remind again.
Scheduler Options menu
☛ 8 4 ➔ Highlight the day ➔ to display the day’s schedule list screen (if any) ➔ Highlight the required scheduled event ➔
No. Scheduler Options menu
1 Add new Adds a new entry.
2Edit Edits the highlighted event.
3 Copy Copies the highlighted event.
4 Delete Deletes event(s). Press the appropriate keys for the event category (the currently selected event, all the public/private events on
the day, all the past public/private events, all the public/private events or all the events) to delete.
5 Go to date Displays the selected date.
6 Monthly calendar/
Weekly calendar Switches the weekly view screen to the monthly view screen, or the monthly view screen to the weekly view screen.
2You can select Sunday or Monday to start the week from “Set start day” on page 24.
7View summary Displays a summary of all the events.
8 View events Displays the events. Press the appropriate keys for the event category (Public only, Private only or All) to display.
2You are required to key in the security code to display the private events or all events.
▼
▼
▼
▼
70 Accessory (M8)
2Depending on the conditions, some options may be displayed in gray and not be available.
ToDo list (M85)
This feature allows you to set up to 100 ToDo tasks that should be finished by a certain date. You can choose to display either all ToDo tasks, or those just finished or
unfinished. Each task is identified by a description (of up to 256 characters) and its start/due date.
Adding a new ToDo task
☛ 8 5 ➔ Highlight the list ➔ ➔ SK1
☛When all settings are done, SK1 to save the setting.
When a ToDo task is completed
☛ 8 5 ➔ Highlight the list ➔ ➔ Highlight the required ToDo task ➔ ➔ 1 and 1, or SK2 to save the task as completed.
Viewing ToDo task details
☛ 8 5 ➔ Highlight the list ➔ ➔ Highlight the required ToDo task ➔ ➔ To view the details of the previous or next ToDo task in the list, or
☛To edit the currently displayed task, SK1
ToDo Options menu
☛To display the ToDo Options menu, 8 5 ➔ Highlight the list ➔ ➔ Highlight the required ToDo task ➔
9 IR send Sends the selected schedule through the IR port to other devices or a cellphone.
2The IR send function is not available during a call.
ToDo list setting
Start date Sets the day, month and year to start the ToDo task.
Due date Sets the date to end the ToDo task. Key in the date or press the appropriate key for the date.
2If you select to key in the date yourself, input the day, month and year of the date to end the ToDo task, then SK1.
Description Sets the ToDo task description (e.g. Pay the rent).
Category Sets the category (Business, Personal or Other).
Priority Sets the priority (Normal, Low or High).
Private Sets the ToDo task as private.
No. Scheduler Options menu (Continued)
▼
▼
71
Accessory (M8)
☛To display the ToDo detail Options menu, 8 5 ➔ Highlight the list ➔ ➔ Highlight the required ToDo task ➔ ➔
Column L shows the ToDo options menu, and column D shows the ToDo detail Options menu.
2Depending on the conditions, some options may be displayed in gray and not be available.
Notepad (M86)
Notepad function allows you to record and store a note as a text file.
Creating a new memo (M861)
☛ 8 6 1 ➔ Key in text ➔ to save the entry as a text file. The first few words are displayed on the text list screen.
Displaying a memo (M862)
☛ 8 6 2 ➔ Highlight a file ➔ SK1 to preview, or to edit
L D ToDo Options menu
14 Add new Adds a ToDo task (see “Adding a new ToDo task” on page 70, from the second step).
–1Status Changes the completion status of the highlighted ToDo task.
22Edit Edits the highlighted ToDo task (see “Adding a new ToDo task” on page 70, from the second step).
3– Delete Deletes ToDo task(s). Press the appropriate keys for the ToDo task category (the currently selected ToDo task, all the
public/private ToDo tasks, all the completed public/private ToDo tasks or all the ToDo tasks) to delete.
–3 Delete current Deletes the current ToDo task.
4– Display filter Sets the type(s) of ToDo tasks to be displayed by selecting the desired filter option (None, Incomplete or Completed).
5–Sort list Displays a list of ToDo tasks rearranged according to the selected sort key (Due date, Category, Priority, or Status).
6–View summaryDisplays the number of Incomplete and Completed tasks and how many more tasks can be created.
75IR send Sends the selected ToDo task through IR port to other devices or a cellphone.
2The IR send function is not available during a call.
72 Accessory (M8)
Notepad Options menu
☛ 8 6 2 ➔ Highlight a file ➔
2Depending on the conditions, some options may be displayed in gray and not be available.
No. Notepad Options menu
1Edit item Changes the protection settings of the selected file.
Rename item: Edits the file/folder name of the selected file/folder.
Set protection: Sets the protection settings of the selected folder or file on/off.
2 Use item Add desktop icon: Creates a desktop icon of the selected file on the standby screen.
IR send: Sends the selected file through IR port to other devices or a cellphone.
2The IR send function is not available during a call.
3 Create message Creates a new message with the highlighted text (note).
4 Delete item Deletes the selected file or folder if it is unprotected.
5 Delete all Deletes all the notes unprotected from the list.
6 Copy item Copies the selected note.
7 Copy all Copies all the notes.
8Move Moves the selected note or all the notes in the current folder to a folder.
9 Create folder Creates a new folder under the current folder.
0 Storage detail Displays the current storage information of your phone memory.
View detail Displays the detail of the selected file.
2You can also display the details on the highlighted folder or file by pressing without displaying the Options menu.
# Options Sorting order: Sorts the files by date, alphabetically, or by the number of Chinese strokes.
Info column: Sets whether to display the column on the list screen, and the information to be shown there.
None: No column showing
Size: Approximate size of the file
Type: File type
2You can also change the information on the column by pressing # without displaying the Options menu.
Flat view: Displays the list of all the stored files regardless of the folder hierarchy.
Save options: Saves the current option settings.
Reset options: Resets the option settings.
73
Accessory (M8)
Voice memo (M87)
Voice memo function allows you to record up to 60 seconds of sound/voice, using your phone’s microphone.
Recording/playing voice memo or setting speaker
☛ 8 7
/See also: “Sounds (M22)” on page 31.
Currency (M88)
Currency function allows you to convert an amount of money in one currency to another.
Converting currency
☛ 8 8
No. Voice memo setting
1Record Records a voice memo.
☛SK1 to start recording.
2You can finish recording and save the data as a file by pressing SK2 even before the recording is completed.
/To record the conversation during a call, see “Recording a call” on page 11.
2Play Plays a voice memo or recorded call.
☛Highlight a voice memo ➔ to start playing and SK2 to stop playing.
3 Speaker setting Selects between speaker and earpiece to play the voice memo.
☛1 for the Speaker, or 2 for the Earpiece.
Currency setting
From Sets the source currency code.
To Sets the destination currency code.
Exchange rate Sets the exchange rate.
☛If you wish to change the exchange rate, CLR to delete the displayed exchange rate and key in the required number
(for decimal point, SK1) ➔
Amount Sets the amount of money you wish to convert (for decimal point, SK1).
74 Accessory (M8)
2If you have made a mistake in entering the exchange rate or amount, CLR to delete individual number or SK2 to cancel the entry and return to the previous
screen, and then start again.
Resetting the currencies
☛ 8 8 and SK1
External connection (M89)
External connection allows you to communicate with other devices (PC, PDA, headset, etc.)
2You cannot use the Infrared and Bluetooth functions at the same time.
Bluetooth (M891)
Bluetooth function allows you to use your phone as a modem and to talk by using a Bluetooth headset.
☛ 8 9 1
/For details, see “Bluetooth (M891)” on page 77.
Infrared (M892)
☛ 8 9 2
/For details, see “IR Data Exchange” on page 80.
Synchronization (M80)
Synchronization function allows you to synchronize data between your phone and your PC/network server. When your phone is connected to your PC (local server) via
a USB cable, you can synchronize phonebook, scheduler or ToDo list data. When your phone is connected to a network server (remote server), you can synchronize
only phonebook data.
2Data should comply with vCard 2.1/vCalendar 1.0 specification
2You cannot synchronize the phonebook data stored in the SIM card.
2You cannot synchronize data with the network server when the bearer type is set to CSD (see “Bearer type” on page 52).
☛Connect your phone with your PC via a USB cable ➔ Activate the software on PC side and prepare for synchronization (for details, refer to the manuals of the
software)
2This procedure is not necessary when synchronizing phonebook data with the network server.
☛ 8 0 ➔ Select the data type (Phonebook, Scheduler or ToDo list) ➔ Select the server type (local or remote) ➔ SK1 or 1 to start synchronization
75
Accessory (M8)
☛To display the Synchronization Options menu,
Dictionary (M8*)
Dictionary function provides you with English - Chinese and Chinese - English dictionaries.
Searching and displaying the definition of a word
2To use the Chinese - English dictionary, set the language to Simplified Chinese before activating the dictionary by 1 1 6 1
☛ 8
☛To display the Dictionary Options menu,
☛To search for the word, highlight the text field at the top and , or 2 ➔ Enter keyword in English or Chinese ➔
☛To scroll the list to find the word, ▲ ▼
☛Highlight the word in the list ➔ to display the definition
☛To display the Dictionary definition Options menu,
No. Synchronization Options menu
1Sync now Starts the synchronization.
2 Remote server Sets the remote server information (Server URL, User name, Password, IP address, Proxy address).
2Changing this information also changes the synchronization server accessed from China Mobile in server.
3 Connection profile Sets the connection profile for the remote server. See “Setting the Connection profiles” on page52.
No. Dictionary Options menu
1 History view Displays the last words you displayed.
☛ to display the History view options menu.
1Delete Deletes the highlighted history.
2 Delete all Deletes all the history.
3 Search Displays the definition of the highlighted history.
2Edit Activates text input screen to enter the keyword to search for a word.
No. Dictionary definition Options menu
1 Copy all Copies the definition text.
2 Save to notepad Saves the definition text as a file in Notepad.
76 Accessory (M8)
Camera (M8#)
Camera function enables you to take pictures and record videos, and to save them as files.
☛ 8 #
☛1 to take a picture, or 2 to record a video.
☛Look into the camera view finder screen to place the target ➔ or the Side up key to take a picture or start recording.
☛To display the Camera Options menu screen,
/About the operations for taking a picture/recording a video, or camera setting options, see “Camera (M8#)” on page 83.
3History view Displays the last 20 words you displayed.
No. Dictionary definition Options menu (Continued)
77
Bluetooth (M891)
Bluetooth (M891)
Bluetooth function allows you to communicate with the external devices (PC, PDA, headset, hands-free kit, etc.).
This function provides the following service:
•Dial-up service - You can use your phone as a modem.
•Headset/hands-free service - You can make/receive a call using a Bluetooth headset or hands-free kit.
2Recommendatory Bluetooth devices for your phone are ANYCOM CF300 (Modem Card), Nokia HDW-3 (Headset), Jabra BT250 (Headset), and Nokia CK-7W
(Hands-free kit).
2When using Bluetooth devices, always refer to their operation manual.
2Depending on the connection status, a Bluetooth device may not function correctly. In such a case, retry operation from the device side, or switch your phone off
and on.
2There may be Bluetooth devices that cannot be connected to your phone.
Using Bluetooth connection
2To use the Bluetooth function, you must perform the Bluetooth settings on your external device beforehand. For details, refer to the operation manual of the device.
2You cannot use the Bluetooth and Infrared functions at the same time.
,While using the Bluetooth device, the following icons will be displayed in the status bar area of your phone.
Pairing a Bluetooth device and your phone
☛ 8 9 1 ➔ 1 to activate Bluetooth function ➔ SK1 if no device is paired, 2 otherwise
☛1 if the device can search and register your phone (e.g. when the device is a PC) or 2 if the device has to be searched and registered by your phone (e.g. when
the device is a headset) ➔ If the device is found, the device list screen will be displayed
☛Highlight the device from the device list ➔
2When pairing, enter a passcode specified by the Bluetooth device to your phone and the device. If no passcode is specified by the device, enter the same arbitrary
number to your phone and the device. A passcode is a number from 4 to 16 digits.
Indicates that Bluetooth device is set to on. Indicates that Bluetooth device is in operation.
78 Bluetooth (M891)
Bluetooth setting
☛ 8 9 1.
2Depending on the conditions, some options may be displayed in gray and not be available.
Device list Option menu
☛ 8 9 1 ➔ 3
No. Bluetooth setting
1 Bluetooth On/
Bluetooth Off Activates or deactivates Bluetooth function.
2If you switch the phone off while Bluetooth On is set, the next time you switch on, the phone will be in Bluetooth
On status again.
2 Pair new device Registers the external Bluetooth devices.
1 Wait for connect Standby your phone to wait for other devices to search for it.
2Other Bluetooth devices can only detect your phone while your phone is displaying
Wait for connect screen.
2 Search device Searches for the nearby active Bluetooth devices.
3 Device list Displays and edits the list of paired devices.
4 My phone Displays the terminal information of your phone.
☛ to display the Options menu
Rename: Edits the terminal name of your phone.
2You cannot edit the information during Bluetooth communication.
5 Active device Displays the information on the device in connection.
6 Disconnect Ends the Bluetooth connection in progress.
No. Device list Option menu
1Rename Edits the name of the highlighted device.
2 Protect/Unprotect Protects or unprotects the highlighted device.
3 Delete device Delete the highlighted device.
4 Delete all devices Delete all the devices listed.
79
Bluetooth (M891)
Device list icons
The following icons will be displayed in the device list screen.
Using your phone as Bluetooth modem
2For details of dial-up connection settings, consult your Internet service provider.
☛Pair the Bluetooth device and your phone beforehand, referring to “Pairing a Bluetooth device and your phone”
☛ 8 9 1 ➔ 1 to activate Bluetooth function ➔ Perform dial-up connection by your PC
☛To end the dial-up connection, disconnect from the PC application
Connecting Bluetooth headset/hands-free kit
2When connecting a wired headset and Bluetooth headset at the same time, the wired headset will not work.
2For some Bluetooth devices, the voice recall function may be activated when a paired headset/hands-free kit is turned on (see“Voice recall” on page 9).
☛Pair the Bluetooth device and your phone beforehand, referring to “Pairing a Bluetooth device and your phone”
☛ 8 9 1 ➔ 3 ➔ Highlight the headset/hands-free kit in the list ➔ SK1
☛Press the button on the headset/hands-free kit
☛To switch the headset/hands-free kit call to your handset call, 9
2You cannot deactivate Bluetooth during a call.
☛To end the call, press or end from the headset/hands-free kit
Indicates the device is not registered.
Indicates the device is other than an
audio and PC.
Indicates the device is an audio (a headset
or handsfree device).
Indicates the device is protected.
Indicates the device is a PC.
80 IR Data Exchange
IR Data Exchange
Your phone is equipped with an InfraRed (IR) data port which enables you to send and receive picture/sound/MP3/video/ToDo list/scheduler/phonebook/note data with
cellphones or other devices equipped with IR ports.
,Do not aim or direct the IR data port towards your or other people’s eyes when using IR data exchange.
,Do not aim or direct the IR data port towards another IR device as this may cause the device to malfunction.
2Depending on the other party’s cellphone or device, the data may not be received correctly.
2You cannot use the Infrared and Bluetooth functions at the same time.
2While sending or receiving data through IR or using your phone as an IR modem, your phone is automatically placed out of service, so phone call, message and
Monternet access are disabled.
Positioning of the phones
,Open both sending and receiving phones vertically and place them as
their IR ports face each other with less than 20cm of interval.
2Do not place anything between IR ports.
2The angle made of two IR ports must be within 30°.
2Do not move the phones until the data exchange is complete.
2The phones may not communicate successfully if they are placed under direct sunlight or fluorescent
light, or close to other infrared devices.
IR send
You can send picture/sound/MP3/video/ToDo list/scheduler/phonebook/note data as a file through the IR port.
2This function is not available during a call.
/Before starting to send data, the other party must be ready to receive data.
Phonebook entry (M713...)
2You can only send Name, Home, Mobile, Work, Fax, 2 Email addresses and 2 pieces of descriptive information.
2Your phone sends data according to the vCard 2.1 specification.
☛To display the phonebook (Phone), (for required number of times) or 7 1 3 ➔ Highlight a phonebook entry.
☛ 0 or 3 ➔ The phonebook entry will be sent through the IR port.
15° or less
20cm or less
81
IR Data Exchange
Video/Sound/Picture/MP3 file (M2...)
☛ 2 1 for Videos, 2 2 for Sounds, 2 3 for Pictures or 2 4 for MP3 ➔ Highlight a folder ➔ ➔ Highlight a file.
☛ 2 3 for Videos/Pictures, 2 4 for Sounds or 2 2 for MP3 ➔ The file will be sent through the IR port (see “My favorites (M2)” on page 31 for
details).
Schedule entry (M84...)
☛ 8 4 ➔ Highlight a date ➔ ➔ Highlight a schedule entry ➔ ➔ 9 ➔ The schedule entry will be sent through the IR port.
ToDo entry (M85...)
☛ 8 5 ➔ Highlight Public, Private or All ➔ ➔ Highlight a ToDo entry ➔ 7 ➔ The ToDo entry will be sent through the IR port.
Note (M862...)
☛ 8 6 2 ➔ Highlight a note ➔ 2 and 2 ➔ The note entry will be sent through the IR port.
IR receive (M8921)
You can standby your phone to receive data (picture/sound/MP3/video/ToDo list/scheduler/phonebook/note) from other devices or a phone of the same model.
Receiving data through IR (M8921)
☛ 8 9 2 1 ➔ Start sending data from the other end.
2Once the transmission completes, your phone automatically judges the type of received data and stores the data accordingly.
2This function is not available during a call.
2If your phone does not have enough space to store the received data, a message will be displayed indicating lack of space. In such a case, delete unnecessary
data and try the data exchange again.
2Received picture/video/sound files are stored in the Download folder of My favorites (see “My favorites (M2)” on page 31).
IR modem (M8922)
You can use your phone as a modem for a PC via the IR port to establish a dial-up connection to an Internet service provider.
Activating the IR port for modem use (M8922)
☛ 8 9 2 2 ➔The phone will be in standby status for IR transmission from the external device.
2If the IR transmission is not established within a short while, the standby status will end.
2While on active call or connecting to the external device such as USB, IR modem is not available.
82 IR Data Exchange
2While using your phone as an IR modem, you cannot use network related services, such as making/receiving calls and sending/receiving messages.
,Your phone consumes a lot of battery power when used as a modem. After using your phone as a modem, be sure to deactivate the modem function
from your PC or press (for the CSD connection only). When the modem function is deactivated, the idle screen will be displayed without the Infrared
icon and GPRS icon.
2Check with your service provider to use your phone as a modem to connect to the Internet.
83
Camera (M8#)
Camera (M8#)
Camera function enables you to take pictures or record videos and save them as Joint Photographic Expert Group (JPEG) files and 3rd Generation Partnership Project
(3GPP) files respectively. You can enjoy the picture and video files in many ways: send them attached to an MMS or Email, set a picture file as the wallpaper for your
phone, etc.
Notes on using the camera
Handling the Camera
,The camera of your phone is manufactured using high-precision technology. However, there may be dots or lines on the screen that appear darker
or brighter than the others. Note also that when you are shooting or recording in dimly-lit places, the amount of noise (such as red and blue dots or
horizontal lines) may increase noticeably.
,Be careful not to apply force to the lens when closing your phone. This could damage the lens.
2Fingerprints or grease on the lens can result in focusing problems or dark images. Wipe the lens clean with a soft cloth before use.
2The image quality may be degraded after your phone has been left for a long period in a warm place.
2Exposing the camera to direct sunlight for a long period could discolour the camera’s internal colour filter and cause discoloured images.
2Camera mode is automatically cancelled if none of the phone’s keys are pressed for 3 minutes or longer.
Precautions when taking pictures/recording videos
2You cannot switch the camera’s shutter sound off. The shutter makes a clicking sound when you take a picture or start/end a video recording, even when the
phone is in Meeting mode.
2Avoid camera shake. Moving the phone when you take a picture will result in a blurred image. Hold the camera firmly to keep it still when you take a picture, or
use the auto timer to take the shot.
2As there is a slight delay from the time you press or Side up until the picture is actually taken, do not move the camera until you hear the shutter sound.
2If taking a picture with not enough light, try to hold the phone still as much as possible, and for a longer period of time after the shutter sound: the shutter speed
may be slower in a darker environment.
2Note that if you attempt to shoot directly into a strong light source, such as the sun, another bright light or the high reflecting target with strong light, the image
may contain washed-out white highlights or be disrupted.
2While recording, be careful not to cover the mouthpiece of your phone as it is used as the microphone to record sound along with the video.
84 Camera (M8#)
Copyright information
2Images and videos shot or recorded on your phone cannot be used in ways that infringe copyright laws without the consent of the copyright holder, unless
intended only for personal use. Note that some restrictions apply to the photographing of stage performances, entertainments and exhibits, even when intended
purely for personal use.
2Users are also asked to note that the transfer of images protected under copyright laws is only permissible within the restrictions imposed by those copyright laws.
,Be considerate of other people’s privacy when you take a picture or record a video using the camera of your phone and send it to others.
Taking a picture (M8#1)
☛To activate the camera function, press and hold Side up or press 8 # 1
2When you highlight Camera on the Camera screen, pressing SK1 creates a desktop icon of the camera function on the standby screen.
☛Look into the camera view finder screen and adjust the camera position to place the target on the screen.
2You can switch the camera view finder screen between the main-LCD and the 2nd-LCD by pressing .
2You can take a picture while the phone is closed.
☛Hold the phone still ➔ To use the shutter, or Side up ➔ Check the picture ➔ If successfully taken, ➔ Saved as a JPEG file in a folder in Pictures
2After taking a picture, press SK1 to send the taken picture attached to a message, and press SK2 to discard the picture.
2The default file name for the picture saved in the folder is the date, month, year and sequence number. When you take pictures in burst mode, the saved files
will be named by the default file names plus a consecutive two-digit number at the end.
2If a call comes in while you are checking or saving a photographed image, image storage is cancelled. When this occurs, the next time you select camera function
a message appears to say that you have an image that was not stored, allowing you to check and store the image.
2Before taking a picture, you can switch to the video camera function by pressing SK2. This use of SK2, however, is invalid if the self-timer function is activated.
Operations when taking a picture
☛To turn the light on or off, SK1 or Side down
2Take care not to hold the light too close to your or other people’s eyes when the light is lit.
☛To zoom in and out, ▲ or ▼
2You can also select 1x, 2x, 3x, 4x or 5x magnification from the Zoom setting on the Camera Options menu.
☛To turn on/off the camera view finder on the full screen, press #.
2Depending on the photo size, there may be parts not seen on the full screen view finder display in the saved picture.
☛To control the brightness level of the picture, or
▼
▼
85
Camera (M8#)
Camera Options menu (before taking a picture)
No. Camera Options menu (before taking a picture)
1 Single mode/Burst mode Switches the shooting mode to Single/Burst mode (serial shooting).
2 Shoot environment Changes the camera settings to suit the environment. Select from Standard, Person, Room or Darkness.
3Effect Applies special effect to the picture. Select from Off, Sepia, Monochrome, or Negative film.
4Photo size Sets the picture size to Sub-QCIF (128x96), QCIF (176x144), Main-LCD (176x220), CIF (352x288), VGA (640x480)
or SXGA (1280x1024).
2You cannot use the Zoom function for VGA and SXGA, and you can select 1x to 2x magnification for Main-LCD
and CIF, 1x to 4x magnification for QCIF and 1x to 5x magnification for Sub-QCIF.
2You can use the Frame and Burst mode functions for Sub-QCIF, QCIF and Main-LCD.
2You cannot use the Full screen function for Sub-QCIF and QCIF.
2If you select Main-LCD, CIF, VGA or SXGA, the picture on the camera view finder screen will be displayed as a
smaller picture than the actual size. Also on the camera view finder screen, the picture size before shooting differs
from the size after shooting.
5 Image quality Sets the image quality to Super fine, Fine, Normal, Economy or Super economy.
6Frame Selects whether to use a frame when taking pictures, and sets the desired frame with which a picture will be taken.
7 Self timer/Self timer cancel Activates or deactivates the self-timer function.
8 Sound settings Selects the Shutter sound and Self timer sound.
9Pictures Opens Pictures in My favorites.
0 Other settings Add desktop icon: Creates a desktop icon of the camera function on the standby screen.
Automatic save: Selects whether to save taken pictures automatically or not.
Save in: Selects the folder (preset or created) where the taken picture will be saved.
Light: Turns the light on or off.
Brightness: Changes the brightness level of the picture between -2 and +2.
Zoom: Changes the zoom magnification from 1x, 2x, 3x, 4x or 5x.
Thumbnail view: Selects whether to display the pictures taken in the Burst mode as thumbnails or slides.
Video recorder: Activates the video function.
Flicker control: Selects 50Hz, 60Hz or Auto to prevent flickers when taking a picture under a fluorescent
light.
Switch finder Selects whether to display the camera view finder on the main-LCD or the 2nd-LCD.
2On the 2nd-LCD view finder, the object appears as a mirrored image.
86 Camera (M8#)
2Depending on the conditions, some options may be displayed in gray and not be available.
Camera Options menu (after taking a picture)
2Depending on the conditions, some options may be displayed in gray and not be available.
Recording a video (M8#2)
Recording a video
,To record a video, keep your phone open at all time. Unlike taking a picture, you cannot record a video while the phone is closed.
☛Press and hold Side up then SK2, or press 8 # 2 ➔ Look into the view finder screen and adjust the camera position.
2When you highlight Video on the Camera screen, pressing SK1 creates a desktop icon of the video function on the standby screen.
2You can switch the camera view finder screen between the main-LCD and the 2nd-LCD by pressing .
☛To start recording, or Side up ➔ The progress bar will show the ratio of how much you have recorded already.
2While recording, be careful not to cover the mouthpiece of your phone as it is used as the microphone to record sound along with the video.
# Full screen Turns the Full screen on or off.
No. Camera Options menu (after taking a picture)
1 Save current Saves the currently displayed picture in the folder selected as Save in setting.
2 Save all Saves all pictures taken in Burst mode.
3 Create message Creates a new message with the file attached.
4 Set as wallpaper Sets the picture to be the main-LCD and/or 2nd-LCD wallpaper.
5 Display as normal image/
Display as mirror image Selects whether to display the taken picture as a normal or mirror image on the main-LCD preview screen
when you select the 2nd-LCD as a camera view finder in Single mode.
6 Save as mirror image Saves the picture as a mirror image when you select the 2nd-LCD as a camera view finder in Single
mode.
7 Thumbnail view Selects whether to display the pictures taken in the Burst mode as thumbnails or slides.
8 Automatic save Selects whether to save taken pictures automatically or not.
9 Save in Selects the folder (preset or created) where the taken picture will be saved.
0Pictures Opens Pictures in My favorites.
No. Camera Options menu (before taking a picture) (Continued)
87
Camera (M8#)
2While recording, the key tones are deactivated.
☛Move the camera to capture the scenes you want ➔ To stop recording, press or the Side up.
2After the set video file size is reached, the recording automatically stops.
2After recording, press SK1 to replay the recorded video, and press SK2 to send the video file attached to a message.
2While replaying, you can fast forward by pressing or rewind by pressing . Pressing SK1 or will stop the fast forwarding/rewinding. Then, pressing SK1
will restart and continue the replay.
2You can discard the recorded video by pressing or CLR.
☛To save the recorded video, . The recorded video is saved as a 3GPP file in the Videos - My movies folder in My favorites (see page 31).
2Pressing # before/while playing a video file will enlarge the replay screen size, and pressing # will return the screen size to normal for Sub-QCIF only.
2The default file name for the recorded video saved in the folder is the date, month, year and sequence number.
/For the operations while replaying the video, see “Videos (M21)” on page31.
/For the operations while recording a video, see “Operations when taking a picture” on page 84.
2If a call comes in while you are checking or saving a video, video storage is cancelled. If this occurs, the next time you select camera function a message appears
to say that you have a video that was not stored, allowing you to check and store the video.
2Before recording a video, you can switch to the camera function by pressing SK2. This use of SK2, however, is invalid if the self-timer function is activated.
Operations when recording a video
☛To turn the light on or off, SK1 or Side down
2Take care not to hold the light too close to your or other people’s eyes when the light is lit.
☛To zoom in and out, ▲ or ▼
☛To control the brightness level of the picture, or
Camera Options menu (before recording a video)
No. Camera Options menu (before recording a video)
1 Shoot environment Changes the camera settings to suit the conditions. Select from Standard, Person, Room or Darkness.
2Effect Applies special effect to the video. Select from Off, Sepia, Monochrome or Negative film.
3 Screen size Sets the video screen size to Sub-QCIF (128x96) or QCIF (176x144).
4 Video file size Sets the video file size to Mail size or Normal size.
5Quality Sets the video quality to High or Standard.
6 Self timer/Self timer cancel Activates or deactivates the self-timer function.
7 Self timer sound Selects the self timer sound from Sound1, Sound2 or Sound3.
▼
▼
▼
▼
88 Camera (M8#)
2Depending on the conditions, some options may be displayed in gray and not be available.
Camera Options menu (after recording a video)
2Depending on the conditions, some options may be displayed in gray and not be available.
8Videos Opens Videos in My favorites.
9 Other settings Add desktop icon: Creates a desktop icon of the video function on the standby screen.
Save in: Selects the folder (preset or created) where the recorded video will be saved.
Light: Turns the light on or off.
Brightness: Changes the brightness level of the video between -2 and +2.
Zoom: Changes the zoom magnification from 1x to 5x for Sub-QCIF and from 1x to
4x for QCIF.
Camera: Activates the camera function.
Flicker control: Selects 50Hz, 60Hz or Auto to prevent flickers when taking a picture under a
fluorescent light.
0 Switch finder Selects whether to display the viewfinder on the Main-LCD or the 2nd-LCD.
No. Camera Options menu (after recording a video)
1Save Saves the currently displayed video.
2 Create message Creates a new message with the file attached.
3 Set as ring tone Sets the video as the ringtone.
4 Set as wallpaper Sets the video to be the main-LCD wallpaper.
5 Full screen Selects whether to enlarge the replay screen size.
2You cannot use the Full screen function for QCIF.
6 View detail Displays detailed information on the selected video.
7 Save in Selects the folder (preset or created) where the recorded video will be saved.
8Videos Opens Videos in My favorites.
No. Camera Options menu (before recording a video)
89
Index
Index
Numerics
2nd-LCD 26
3GPP 83
4 way navigation key v
A
AC adapter 3
Accepting an incoming call 7
Accessory 66
ADN 57
Alarm volume 25
Alert message 40, 55
ALS 23
Animation 32
Any key answer 23
AoC 12
Auto answer 26
Auto redial 14
B
Bar calls 29
Basic calls & phone use 6
Battery charging 3
Battery level icons vii, 4
Battery pack 1
Bluetooth 77
Bookmark 54
C
Calculator 67
Call diversion 13
Call history 11
Call lists 12
Call transfer 10
Call waiting and holding 14
Camera 83
Recording a video 86
Taking a picture 84
Car mode 24
CB 50
China Mobile in 56
CLI 6, 62
Clock 24
Clock alarm 67
Clock selection 26
Clock/Event display 26
Colour style 26
Connection profile 29
Contrast 26
Correcting mistakes 6
CSD 51
Currency 73
Customer service 56
D
Date 24
Date format 24
Desktop icons 21
Dialled calls list 12
Dictionary 75
Download 51
E
Earphone setting 25
Earphone type 24
Email account 41
Email messages 39
Emergency calls 8
Ending a call 6
External connection 74
F
Fast dialling 8
FDN 29, 58
Flicker control 85, 88
Fold answer 23
Frame 33
Frequency band 16
Function key LED 27
G
General care i
GPRS 51
Greetings 26
Groups 60
H
Hands-free kit 77
Headset 24, 77
Highlight mode 44, 50
Holding a call 9
Homepage 51
I
Icons vii, 40, 48, 77, 79
Inbox 39
Incoming call No. 26
International dialling codes 15
IR Data Exchange 80
IR modem 81
IR receive 81
IR send 80
J
Java™ 37
JPEG 83
K
Key allocations 20
Key tone 25
Keypad shortcuts vi
L
Language 24
Last call duration 12
Last number redial 8
LCD iv
LED 24
Logging on to WAP site 54
Low battery alarm 4
M
Main menu ix
Main menu style 26
90 Index
Main-LCD 26
Making basic calls 6
Meeting mode 24
Menu functions ix
Menu shortcuts selection iii
Message 39
Missed calls list 12
MMS messages 39
MMS tone 25
MMS tone volume 25
Monternet 51
MP3 player 66
Multi-party calls 10
Mute 10
My favorites 31
Java 34
MP3 34
Pictures 32
Sounds 31
Videos 31
N
Network selection 15
Normal mode 24
Normal text (ABC) input 18
Notepad 71
Number type 63
Numeric input 18
O
One-touch dial 8
Option mode 44
Origin number 63
Own phone number display 8
P
Parts and functions v
Phone lock 29
Phone modes 24
Phonebook 57
PIM 28
PIN activate 28
PIN code 5, 28
PIN2 code 28
Pocket mode 24
Power saving 27
Preparing the phone 1
PUK 28
R
Reading a message 40
Received calls list 12
Receiving an incoming call 7
Recording a call 11
Redial blacklist 12
Rejecting an incoming call 7
Reset settings 30
Ring silencer 23
Ringer 25
Ringer volume 25
Roaming 15
S
Scheduler 68
Scratchpad number 11
SDN 58
Security 28
Security code 28
Service tone 25
Setting your connection profile and
homepage 51
Settings 23
Shortcuts selection ix
Side key lock 23
SIM card 1
SIM card insertion 1
SIM card removal 2
SMS messages 39
SMS tone 25
SMS tone volume 25
Snapshot 54
Stamp 32
Standby and talk times 4
Standby screen iv
Starting a call 6
Start-up 4
STD 6
Switching the phone off 5
Switching the phone on 4
Synchronization 74
T
T9 Chinese Stroke input 19
T9 English text input 17
T9 Pinyin input 19
T9 Zhuyin input 19
Text entry 17
Mode change 17
Time 24
Time format 24
Timezone 24
ToDo list 70
Total calls duration 12
U
Unsuccessful calls 7
User’s manual conventions iii
V
Vibrator 25
Video 83
Recording a video 86
View mode 45
Voice mail 64
Voice memo 73
Voice recall 9
Voice volume 23
W
Wallpaper 26
Web settings 51
Web site 55
Z
Zoom 85, 88
1_40405
!
!"#$%&#'(()*(&'+#,#-)#'.&#)(&) (&/(+*#)&**#0+##)*%#1" *'11/
#0$'# * ()2/#3#&+4 #&#.4- 5%+% 1 ,("# - 5%#& *#'*#) / + $"(&+# (.(&'* *%#
'*(&)()5('6 78. %"#*%## (4!#)//##&+#'!#*5##&*%#1"#,#"'/,('$%&#'(&)(*
,('$'*&'-*%#4("" ##*111*%##3# #&*'/#0$'#
1%##0$'#'*(&)()/ !"#$%&#'# $"4'(&*/ #('# #&*8&5&('*%#$#+/+!'$*&
(*#-
11%#" */ !"#$%&#''#)!4*%#$!"+'9:5(**'78".( 78.(,#(.#),#*#&.( '
/*''#-#+ #&)#)!4%#&+"/*%#$#(&&&%#" *&+$(*#'('!'*(&*(" (.&/
'(/#*4*.,#())*&("$*#+*&/*%#$!"+(&)*(++&*/(&4,((*&'& #('# #&*'
111#'*'/%(,#!##&+&)+*#)'&.'*(&)()$#(*&.$'*&'5*%*%#$%&#*(&' **&.(**'
%.%#'*+#*/#)$5#"#,#"&(""*#'*#)/#3#&+4!(&)'"*%.%*%#')#*# &#)(**%#%.%#'*
+#*/#)$5#"#,#"-*%#(+*(""#,#"/*%#$%%"#$#(*&.+(&!#5#""!#"5*%# (0
,("#%''!#+('#*%#$%&#')#'.&#)*$#(*#(* "*$"#$5#"#,#"''('*'#&"4*%#$5#
#3#)*#(+%*%#&#*58&.#&#("-*%#+"'#4(#*(!('#'*(*&(&*#&&(-*%#"5#*%#$5#
*$*
!
5#"#''$%&#+&*(&'(()*(&' **#(&)#+#,#$%&#')#'.&#)(&) (&/(+*#)
&* * #0+##) *%# # ''& " *' / #0$'# * () /#3#&+4 #&#.4 '#* !4 *%# #)#("
&+(*&' ''&/*%#;,#& #&*%#'#" *'(#$(*/+ $#%#&',#.)#"&#'
(&)#'*(!"'%$# **#)"#,#"'/#&#.4/*%#.#&#("$$"(*&%#.)#"&#'(#!('#)&'*(&)()'
*%(* 5## )#,#"$#) !4 &)#$#&)#&* '+#&*/+ .(&<(*&' *%.% $#)+ (&) *%.% #,("(*& /
'+#&*/+'*)#'
%# #0$'#'*(&)()/5#"#'' !"# $%&#'# $"4' ( &*/ #('# #&*8&5& ('*%# $#+/+
!'$*& (*#%# " * '#* !4 *%# ' = 78.1#'*' / (# +&)+*#) '&.
'*(&)()$#(*&.$'*&'(++#$*#)!4*%#5*%*%#$%&#*(&' **&.(**'%.%#'*+#*/#)$5#
"#,#"&(""*#'*#)/#3#&+4!(&)'"*%.%*%#')#*# &#)(**%#%.%#'*+#*/#)$5#"#,#"-*%#
(+*(""#,#"/*%#$%%"#$#(*&.+(&!#5#""!#"5*%# (0 ,("#%''!#+('#*%#
$%&#')#'.&#)*$#(*#(* "*$"#$5#"#,#"''('*'#&"4*%#$5##3#)*#(+%*%#&#*58
&.#&#("-*%#+"'#4(#*(5#"#''!('#'*(*&(&*#&&(-*%#"5#*%#*$*
6#/#($%&# )#"'(,("(!"#/'("#**%#$!"+-* '*!#*#'*#)(&)+#*/#)**%#*%(**)#'
&* #0+##) *%#" * #'*(!"'%#) !4 *%# .,#& #&*2()$*#) #3# #&*/ '(/##0$'#%# *#'*' (#
$#/ #)&$'*&(&)"+(*&'/#0( $"#-(**%##((&)5&&*%#!)4('#3#)!4/
#(+% )#"%#%.%#'*,("#/*%' )#"$%&#('#$*#)**%#5%#&*#'*#)/'#(**%##(
'6 78.-(&)5%#&5&&*%#!)4-'6 78.6)425& #('# #&*')//#( &.$%&#
)#"'- )#$#&)&. $& (,("(!"# (++#''#' (&) #3# #&*' %"# *%## (4 !# )//##&+#'
!#*5##&*%#"#,#"'/,('$%&#'(&)(*,('$'*&'-*%#4("" ##**%#.,#& #&*#3# #&*
1&*%#&*#)*(*#'-*%#" */5#"#'' !"#$%&#''#)!4*%#$!"+'=5(**'78. 78.
(,#(.#),#&#.( /*''#,("#' (4,(4)#$#&)&.$&&(*&("#$*&.#3# #&*'(&)
*%#&#*58!(&)
6)425&$#(*&
%# %(' .(&*#) (& 3$ #&* *%<(*& / *%' )#" $%&# 5*% ("" #$*#) "#,#"'
#,("(*#)('&+ $"(&+#5*%*%##0$'#.)#"&#'&/ (*&&*%' )#"$%&#'&
/"#5*%*%#(&)+(&!#/&)&)#*%#'$"(4;(&*'#+*&(*%**$>77555/++.,7#*7/+)(/*#
'#(+%&?@2A=B
!)45&$#(*&-*%'$%&#%('!##&*#'*#)(&) ##*'*%##0$'#.)#"&#'5%#&'#)
5*%((++#''4)#'.&(*#)/*%'$)+*5%#&'#)5*%(&(++#''4*%(*+&*(&'& #*("(&)
*%(*$'*&'*%#%(&)'#*( & /C+ / *%#!)4