NEC of America KEG4809 Cellular WCDMA Phone with RFID User Manual

NEC Corporation of America Cellular WCDMA Phone with RFID Users Manual

Users Manual

1Voice/Videophone Calls■Making calls/videophone callsMaking a Voice/Videophone Call .................................................................................... 2Switching a Voice/Videophone Call During a Call .......................................................... 5Making International Calls ......................................................................... 6Using Handsfree During a Call ........................................................................ 7Making a Call Using Redial/Dialed Calls/Received Calls......................................................................................... 8Using Chaku-moji .......................................................................................... 10Showing/Hiding Caller ID When Making a Call............................................................... 11Sending Touch-tone Signals ........................................................................... 12Using the Prefix Function................................................................................................ 12Making a Call Specifying a Sub-Address........................................... 13Setting the Alarm for Reconnection ....................................................... 13Making the Earpiece Sounds Clear ...................................................... 13Reducing Surrounding Noise to Make Voice Clear.................................. 14Talking Handsfree While Driving............................................................ 14■Receiving calls/videophone callsReceiving a Voice/Videophone Call................................................................................ 14When the Other Party Switches a Voice/Videophone Call ............................................. 16Pressing a Dial Key to Answer a Call......................................................... 16Ending/Holding Call by Folding the FOMA Terminal........................... 17Adjusting Earpiece Volume.................................................................................. 17Adjusting Ring Volume.................................................................................. 17■When you can/could not answer a voice/videophone callHolding Incoming/Current Calls ............................................................... 18Using Public Mode .......................................................................................................... 18When You Cannot Answer an Incoming Call .................................................. 20Recording Voice/Video Messages When You Cannot Answer the Call................................................................................................................ 21Recording a Message When You Cannot Answer Incoming Call ............. 22Playing/Deleting Record Messages/Voice Memos/Moving Picture Memos .................... 22■Setting the VideophoneUsing Chara-den............................................................................................................. 23Setting Videophone Functions........................................................................................ 23Using Videophone Call by Interfacing to External Device............................................... 26WORLD CALLHandsfreeRedial/Dialed calls/Received callsChaku-mojiPause dialSub-address settingReconnect signalHyper Clear VoiceNoise reductionIn-car hands-freeAnswer settingSetting when foldedVolumeRing volumeOn hold/HoldingMissed callRecord messageQuick message
2Voice/Videophone CallsMaking a Voice/Videophone Call1Enter the phone number of the other partyAlways start with the area code, even for a call within the same area.You can enter up to 80 digits for the phone number. However, only the last 26 digits are displayed.<When you enter a wrong number>■To insert a numberPress v to move the cursor to the number to the left of the position where you want to insert the number, then enter the number.■To delete a numberPress v to move the cursor to the number you want to delete, then press t.Hold down t for 1 second or longer to delete all the numbers to the left of the cursor and the number in the cursor position.2r (voice call), o (V.phone)<Videophone>■To make a videophone call with Chara-denXUu (FUNC)X“Select image”X“Chara-den”XSelect Chara-denEnter phone numberFunction menu¨p.4<Voice call>“ ” flashes while dialing and lights up during the call.■If you hear the busy toneThe line is busy. Call again after a while.■If you hear a message that the other party cannot be reachedThe other party’s mobile phone is not turned on or is out of signal range. Call again after a while.■If you hear a message requesting your caller IDCall again with Caller ID Notification enabled.→p.11<Videophone>“ ” flashes while dialing a videophone call and lights up during the call.■If a videophone call is not connected→p.5■To switch between camera image and substitute imageXUu (FUNC)X“Substitute image”⇔“My side”■To send video captured with the rear cameraXXd (Change)The front camera and rear camera switch each time you press Xd (Change).■To switch the main screenXXd (Change) (1 second or longer)“Change main disp.” →p.4■To enlarge a camera image to be sentXUse Xv to adjust zoom■To mute the voice to sendXSa (マナー ) (1 second or longer)“ ” appears.To cancel muting, press Sa ( マナー ) for 1 second or longer again.In-callVideophone in-callFunction menu¨p.4
3Voice/Videophone Calls■To set Hyper Clear Voice →p.13■Switching a Voice/Videophone Call During a Call→p.5■To put the current voice/videophone call on hold→p.18■When 2in1 is in Dual modeThe Outgoing number selection screen appears. Select a phone number.3To end the call, press y NzIf no keys are pressed for 15 seconds during a voice call, the Power saver mode activates.zIf you make an emergency videophone call (110, 119 or 118), the call automatically changes to a voice call.zYou cannot receive i-mode mail or MessageR/F during a videophone call (you can receive SMS). Received mail is stored at the i-mode center and can be retrieved using “Check new messages” after the videophone call.zDigital communications charges apply when the substitute image is displayed during a videophone call.VideophoneYou can use the videophone call function between terminals that support the DOCOMO videophone system.zDOCOMO’s Videophone is compliant with the 3G-324M*2 international standard established by the 3GPP*1 (the 3rd Generation Partnership Project that sets standards for 3rd generation mobile communications systems). Connections with videophones using different standards cannot be made.*1: 3GPP (3rd Generation Partnership Project) A regional standardization body established to develop commonly applied technical specifications for 3rd-generation mobile communications systems (IMT-2000).*2: 3G-324MAn international standard for 3rd-generation mobile videophones.■Guide to the videophone screen①Main screen (Camera image of the other party is displayed by default)②Sub-screen (Your own camera image is displayed by default)③Last call duration④Settings : Hyper Clear Voice (Low/High) : Voice being transmitted/Transmission error : Video being transmitted/Transmission error : Camera image/Substitute image/Chara-den being transmitted : Handsfree ON/OFF : Muting: Visual check in progress: Photo mode (Portrait/Scenery/Close-up) : Key operation mode (DTMF mode*1/Whole action mode*2/Parts action mode*2)*1 : “Send DTMF tone/DTMF tone OFF”→p.4*2 : “Using Chara-den”→p.231342
4Voice/Videophone CallsEnter phone number screen (p.2)Notify Caller ID→p.11Prefix numbers→p.12Chaku-moji→p.10Int’l call→p.7Multi NumberAdd to phonebookCompose messageSelect image……Select Me/Chara-den as an image used during a videophone call. Select “Release settings” to release the setting.Videophone in-call screen (p.2)Petit message→p.25Decoration→p.25Off decoration……Delete the displayed message or stamp.Substitute image⇔My side……Switch between the camera image and substitute image.Rear camera⇔Front camera……Switch between the front and rear cameras.This setting is only retained during the call.Change main disp.……Change the main display. The screen changes in the following order: “Displaying the image from the other party’s camera on your main screen”→“Displaying the image from your own camera on your main screen”→“Displaying only the image from the other party’s camera”→“Displaying only the image from your own camera”.Visual check⇔Visual check off……View yourself with the front camera during a videophone call. Otherwise, end checking. “ ” appears and the substitute image is sent to the other party during visual check.V.phone settings……Set the screen for videophone calls.Visual prefer.……Select Normal/Prefer img qual/Prefer motion spd for an image sent to and received from the other party. This setting is only retained during the call.Brightness……Adjust the brightness between five levels (–2 to 0 to +2).White balanceColor mode set……Select Normal/Sepia/Monochrome as an image effect. This setting is only retained during the call.Photo mode……Select a shooting mode.Cannot be set for the front camera.Chara-den set.……Set the following when Chara-den is used. This setting cannot be set for the camera images.Switch Chara-den, Action List, Change ActionSwitch image……Display an image selected in “Substitute image” (p.24) on the other party’s display.Display light……Turn on the light all the time or follow the “Lighting” settings under “Backlight”.FrontCamera Rev.……Set whether to display your camera image as a mirror image (ON) or normal image (OFF) on your FOMA terminal during a call.Own number……Display your phone number during a videophone call.Send DTMF tone⇔DTMF tone OFF……Set/Release push signal transmission mode during Chara-den. Videophone calls other than Chara-den are always in push signal transmission mode.Change to voice→p.5
5Continued on next pageVoice/Videophone Calls●If a videophone call is not connectedWhen a videophone call is not connected, the cause of the failure appears.zThe cause may not appear depending on the situation.zDepending on the type of the other party’s phone or network service subscription, the reason may not accurately reflect the other party’s actual status.zIf the videophone call is not supported, your call is automatically switched to a voice call when you set “Auto redial as voice” to “ON”. However, the videophone may not work properly if you call an ISDN synchronous 64 KB access point, 3G-324M-incompatible ISDN videophone (as of April, 2009) or if you dial a wrong number. Call charges may apply.Switching a Voice/Videophone Call during a CallzYou can use this function with terminals compatible with voice call/videophone call switch.zYou can switch calls only when you are the caller.zTo switch calls, the receiver needs to set “Ntfy switch-mode” beforehand.→p.24<Example: To switch a voice call to a videophone call>1In-call screen (p.2)Xd (V.phone)X“YES”During switching, a screen appears indicating that the calls are being switched, and voice announcement is played.■To switch a videophone call to a voice callXVideophone in-call screen (p.2)Xu (FUNC)X“Change to voice”Display CauseCheck number then redialThe dialed phone number is not in useBusy The line is busy• This message may also appear during packet communication, depending on the other party’s terminal.Busy with packet transmissionThe other party is using packet communicationOut of service area/power offThe other party is out of range or the phone is turned offYour call is being forwardedThe call is being forwarded (a videophone call is made when the forwarding number is for a 3G-324M-compatible videophone)Redial using voice callThe forwarding phone is not compatible with videophonePlease activate caller ID before dialing againThe other party has set the Caller ID request serviceThis number is not availableThe other party has set the Nuisance call blocking serviceUpper limit has been exceeded Connection failedThe upper limit set for a Limit billing plan (Type Limit or Family Wide Limit) is exceededConnection failed You attempted to connect without notifying your caller ID (when dialing into visualnet, etc.)• This message may also appear in other situations.Set Caller ID Notification to “ON” and retry.Please make your call from the i-mode web pageYou attempted to make a videophone call to watch V-live without browsing the i-mode official siteNzIt takes about 5 seconds to switch the calls. Note that the signal quality may affect the switching time.Digital communications charges apply after this screen appears.
6Voice/Videophone CallsMaking International Calls<WORLD CALL>WORLD CALL is a service where you can use your DOCOMO mobile phone to call overseas.You applied for “WORLD CALL” when you started to use FOMA services. (Except if you did not wish to apply for it.)zYou can make a call to approximately 240 countries and regions worldwide.z“WORLD CALL” charges are billed with your monthly FOMA call charges.zIn addition to directly dialing a phone number, you can make an international call by adding “+” or selecting “Int’l call” or “Prefix numbers” from the function menu of the enter phone number screen or Phonebook/Redial/Dialed calls/Received calls detail screen.zServices are not available in some billing plans.Dialing a phone number to make an international call1Dial the phone number in the following order: 010→Country code→Area code (City code)→Other party’s phone numberDial the other party’s phone number excluding “0” at the beginning of the mobile phone number or area code (city code). However, to call to some countries/areas, such as in Italy, “0” is required.You can also make an international call by dialing the phone number in the following order: 009130→010→Country code→Area code (City code)→Other party’s phone number.2r The international call is made.Simple procedures for making international callszYou can store country codes and international call access codes in “Int’l dial assistance”.●Using “+” to make an international call“+” changes to “IDD prefix code” set in “Auto int’l call set.”, and you can make an international call without dialing the IDD prefix code.zSince “Auto int’l call set.” under “Int’l dial assistance” is set to “ON” (automatically added) by default, the IDD prefix code is automatically dialed.1On the standby screen, dial the following: + (0 (1 second or longer)) →Country code→Area code (City code)→Other party’s phone numberDial the other party’s phone number excluding “0” at the beginning of the mobile phone number or area code (city code). However, to call to some countries/areas, such as in Italy, “0” is required.zYou cannot switch calls in the following cases:• When the other party is holding the call• When the other party activates Record messagezThe displayed call duration is reset to 0 second each time the calls are switched. However, the total time of the voice and videophone calls is displayed after the call ends.zDepending on the other party’s communication conditions or signal quality, you may not be able to switch the calls and the call may be disconnected.zWhen the call is switched, the first dialed or received call is stored in the Redial/Dialed calls or Received calls.<When switching from voice call to videophone call>zIf the caller is using i-mode, i-mode is disconnected and the call is switched to videophone.zIf the other party is using packet communication (including i-mode), the message “No Switch” appears and the calls cannot be switched.zYou cannot switch the calls when “Call Waiting” is active.For WORLD CALL, call at general inquiries provided on the back of the manual.NInternational videophone calls are available with users of specific roaming operators overseas or FOMA terminals in Japan.zSee “Mobile Phone User’s Guide [International Services]” or the DOCOMO International services website for countries and operators.zIn some types of the other party, international videophone is not available or the other party’s picture on FOMA is distorted.
7Voice/Videophone Calls2rX“Dial”The international call is made.■To make a call with the numbers entered in Step 1X“Original phone No.”The international call is made.■To cancel callingX“Cancel”●Making an international call from the function menuOpen the function menu and add the country code and IDD prefix code to make an international call.zYou can use the international dialing function on the Enter phone number screen or Phonebook/Received calls/Dialed calls/Redial detail screen.<Example: To use the international dial function on the enter phone number screen>1Enter the phone number of the other party2u (FUNC)X“Int’l call”XSelect a country codeXSelect an IDD Prefix codeThe selected country code and IDD prefix code are added. “0” at the beginning of the mobile phone number or area code (city code) is automatically deleted (except when “Italy” is selected for the country code).3r The international call is made.Setting international calls<Int’l dial assistance>Set the auto conversion of “+”, and edit or store country codes and IDD prefix codes.1iX“Settings/NW Service”X“Dialing”X“Int’l dial assistance”XSelect any item:Auto int’l call set.……Set the auto conversion of “+” used when making an international call.X“ON”XSelect a country codeXSelect an IDD Prefix code■To disable auto conversionX “OFF”Country Code setting……Store up to 22 country names and country codes to use when making international calls. See “Country codes of major countries” or the DOCOMO International services website for country codes.XHighlight an itemXo (Edit)XEnter a country nameXEnter a country code■To delete a country codeXu (FUNC)X“Delete”XSelect a deletion methodIDD Prefix setting……Store the IDD prefix name and IDD prefix code to use when making an international call. Up to 3 entries can be added.XHighlight an item to store or editXo (Edit)XEnter an IDD prefix nameXEnter an IDD prefix code■To delete the IDD PrefixXu (FUNC)XSelect a deletion methodUsing Handsfree During a Call<Handsfree>The other party’s voice comes from the speaker during a call.1In-call screen (p.2), Videophone in-call screen (p.2) Xo ()“ ” appears and the other party’s voice comes from the speaker during a handsfree call.While ringing, you can switch to handsfree by pressing o (/).■To release handsfreeXPress o ( ) during a handsfree call“ ” disappears for voice call. “ ” changes to “ ” for videophone.NzEven if Caller ID Notification is active, the caller ID may not appear properly depending on the operator. In this case, calls cannot be made from the Received calls screen.Voice call Videophone call
8Voice/Videophone Calls●Notes on useIt is recommended that you keep a distance of about 30 cm from the FOMA terminal during a handsfree call. If it is too close or too far, the other party may find it difficult to hear you or your voice may sound differently.Making a Call Using Redial/Dialed Calls/Received Calls<Redial/Dialed calls/Received calls>Information on the other party’s phone number and the date and time is stored in the Redial/Dialed calls/Received calls. You can make a call to the other party quickly by using these records.zWhen you make calls to the same phone number repeatedly, the latest entry is saved to Redial and separate entries are saved to Dialed calls.zUp to 30 phone numbers for voice calls and videophone calls can be stored in Redial.zUp to 30 voice call and videophone call entries and 30 packet communication and 64 KB data communication entries can be stored in Dialed calls/Received calls.zIf the maximum number of entries is exceeded, older entries are overwritten.<Example: To make a call from the Redial/Received calls list screen>1On the standby screenXj (Redial) or h (Received calls)■To check Dialed callsXiX“Own data”X“Dialed calls”2Highlight a Redial/Received calls entry■To make a call after checking the details of the Redial/Received calls entryXSelect a Redial/Received calls entry3r (voice call), o (V.phone)●Checking the number of missed calls■To check only missed calls in Received callsXiX“Own data”X“Received calls”The total number of received calls, the number of missed calls and the number of unconfirmed missed calls appear.When you select “Missed calls”, only the missed calls appear.■Icons for redial/dialed calls and received callsNzBefore switching to a handsfree call, move to an area where your call will not disturb other people.zWhen a call is finished, the handsfree setting is released.Ex. Redial (list) Function menu¨p.9Icon*1 Description/ / Incoming and Outgoing/Missed/Unconfirmed missed voice calls/ / Incoming and Outgoing/Missed/Unconfirmed missed international voice calls/ / Incoming and Outgoing/Missed/Unconfirmed missed videophone calls/ / Incoming and Outgoing/Missed/Unconfirmed missed international videophone calls*2 Incoming and Outgoing calls in B mode of 2in1/ Record message/Record VP messageReceived calls with Chaku-moji・//Incoming and Outgoing/Missed/Unconfirmed missed packet communication/ / Incoming and Outgoing/Missed/Unconfirmed missed 64K data communicationEx. Redial (detail)Function menu¨p.9
9Continued on next pageVoice/Videophone Calls*1 : Some icons look different between the detail screen and list screen.*2 : Displayed only when 2in1 is in Dual mode.Redial/Dialed calls/Received calls screen (p.8)Notify Caller ID*1 →p.11Prefix numbers*1 →p.12Chaku-moji*1 →p.10Int’l call*1 →p.72in1/Multi Num.*1……Select Number A/Number B/Cancel number when 2in1 is set to ON in Dual mode (not available when A mode or B mode is set). When the 2in1 setting is set OFF, select Basic Number/Additional Number 1/Additional Number 2/Cancel number.Ring time*2*3……Display missed call entries with ringing times.Add to phonebookLook-up phonebookAdd desktop iconCompose messageCompose SMS*4Search location……Access the i-mode site and execute imadoco kantan search using the phone number.Sent address*5, Received address*3……Display respective screens.Select image……Select My side/Chara-den for an image used during a videophone call. Select “Release settings” to release the setting.Big font⇔Standard font*3……Change the font size of the displayed name.Delete……Select Delete this/Delete selected/Delete all.*1 : Available only on the detail screen.*2 : Available only on the Received calls screen.*3 : Available only on the list screen.*4 : Available only when 2in1 is in A mode or Dual mode, and a record of A mode is selected.*5 : Available only on the Redial or Dialed calls screen.Incoming packet communication or 64K data communication that is received without an external device connectedIncoming and Outgoing calls when the Time zone is not “GMT+09” regardless of the “Auto time adjust” setting (the summer time is displayed when you set the summer time)NzWhen using 2in1, up to 30 entries for Number A and for Number B respectively are stored in Redial/Dialed calls/Received calls regardless of the mode.<Redial/Dialed calls>zActivating “Restrict dialing” deletes all Redial/Dialed calls entries.zWhen you make a call by selecting Multi number from the function menu, the registered name and number of the additional number are displayed under the phone number on the Redial screen (detail)/Dialed calls screen (detail). When you make a call without using the function menu, nothing is displayed even when “Set Multi Number” is set to additional number.<Received calls>z“Callback” appears on the Received calls screen of a voice call for callers who are not stored in the phonebook and stored in Redial.zWhen “Missed calls display” under “Ring time (sec.)” is set to “Not display” and you receive a call of which ring tone sounded for a shorter time than the time set in “Set mute seconds”, the call is not displayed in Received calls.zIf the caller is using a direct line, a number different from the direct dialing number may be displayed.zIf the same phone number is registered in multiple phonebook entries with different names, the names appear in reading order on the Received calls screen.zWhen you have subscribed to Multi number and make a call from the Received calls screen, the phone call is made from the number that received the call regardless of the “Set Multi Number” setting.zWhen you receive a call for the additional number of Multi number, the registered name of the additional number is displayed under the phone number on the Received calls screen (detail).Icon*1 DescriptionNzSelecting “Delete all” on the Redial/Dialed calls deletes all Redial and Dialed calls entries. Note that selecting “Delete this” or “Delete selected” for a Redial entry does not delete the entry from Dialed calls, and selecting “Delete this” or “Delete selected” for a Dialed calls entry does not delete the entry from Redial.
10Voice/Videophone CallsUsing Chaku-moji<Chaku-moji>When making a voice call or videophone call, send a message (Chaku-moji) to the other party to show a summary of the call, etc. beforehand.z5 Chaku-moji messages are stored at the time of purchase. You can change the pre-installed Chaku-moji messages.zYou can include pictograms or face marks in Chaku-moji, and you can send a message of up to 10 characters including pictograms/symbols/double-byte characters/single-byte characters.zFor details on Chaku-moji and the compatible models, refer to the NTT DOCOMO website or “Mobile Phone User’s Guide [Network Services]”.Adding, editing and setting messages1iX“Settings/NW Service”X“Network service”X“Chaku-moji”XSelect any item:Create message……Store or edit frequently used Chaku-moji. Up to 30 Chaku-moji messages (including 5 pre-installed) can be stored.XHighlight an item to store or editXo (Edit)XEnter Chaku-moji■To delete a messageXu (FUNC)X “Delete”XSelect a deletion methodMSG display settings……Select Display all messages/Only number in PH-book/Calls with Caller ID/Hide all messages as the Chaku-moji display setting for an incoming call with Chaku-moji.3D message display……Set whether to display Chaku-moji in 3D animation.Making a call with a messageYou can add Chaku-moji when making a voice or videophone call from the “Enter phone number” screen and the detail screen of the “Phonebook”, “Redial”, “Dialed calls” or “Received calls”.<Example: To make a voice call with Chaku-moji from the enter phone number screen>1Enter phone number screen (p.2)Xu (FUNC)X“Chaku-moji”XSelect any item:Create message……Enter Chaku-moji. Up to 10 characters can be entered.Select message……Select a stored Chaku-moji. You can edit Chaku-moji by pressing o (Edit) on the message selection screen.Sent messages……Select a previously sent Chaku-moji. You can edit Chaku-moji by pressing o (Edit) on the sent message screen.■To delete the entered Chaku-moji (to make a call without Chaku-moji)Xu (FUNC)X“Chaku-moji”X“Create message”XClear the entered text2r (voice call), o (V.phone)When the other party’s terminal receives Chaku-moji, “Transmission completed” appears.zWhen 2in1 is set to ON, selecting “Delete all” on the Redial/Dialed calls/Received calls screen deletes all Redial/Dialed calls/Received calls entries in A or B mode regardless of the 2in1 mode.<Compose message>zCompose mail with a mail address specified as the recipient when the mail address is stored in the phonebook together with the phone number. If multiple mail addresses are stored, the first address is used.NNzYou cannot delete the pre-installed Chaku-moji. Even when you change a pre-installed Chaku-moji and delete the Chaku-moji, it is restored to default.
11Continued on next pageVoice/Videophone Calls●When you receive a voice or videophone call with a messageThe Chaku-moji appears on the ringing screen. The Chaku-moji disappears when you answer the call.zThe received Chaku-moji is displayed in 3D animation.●Displaying a message from Received callsWhen you receive Chaku-moji, the “ ” icon appears on the Received calls entry, and you can check the Chaku-moji on the “Received calls” screen (detail).Showing/Hiding Caller ID When Making a CallAdding the “186”/“184” prefix to the other party’s phone numberTo show your caller ID, add the “186” prefix when you dial the phone number. To hide your caller ID, add the “184” prefix.■To show your phone number186 - (The other party’s phone number)Xr (voice call) or o (V.phone)■To hide your phone number184 - (The other party’s phone number)Xr (voice call) or o (V.phone)Showing/Hiding your caller ID from the function menuShow/Hide your caller ID using the function menu of a detail screen such as “Enter phone number” screen, “Phonebook”, “Received calls”, “Dialed calls” or “Redial”.<Example: To make a voice call from the Enter phone number screen>1Enter the phone number of the other party2u (FUNC)X“Notify Caller ID”X“OFF” or “ON”NzCharges apply to send Chaku-moji. Charges do not apply to receive Chaku-moji.zUp to 30 sent Chaku-moji can be stored in Sent messages. (Regardless of the modes in the use of 2in1, up to 30 Sent messages are stored in A and B numbers, respectively.) When you send the same Chaku-moji repeatedly, only the latest one is recorded. When the number of entries exceeds the maximum, older entries are overwritten.zIf the receiver’s handset is under the following conditions, Chaku-moji cannot be sent. In this case, no sending charges apply.• The handset does not support Chaku-moji (“Transmission failed” appears)• Chaku-moji does not appear on the receiver display due to the “MSG display settings” on the receiver handset “Transmission failed” appears)• Public mode (Driving mode) is set• The ringing time for Record message is set to 0 second• “ ” is displayed or the power is offzDepending on the signal quality, the transmission result may not appear on the sender terminal even when the receiver terminal receives Chaku-moji. In this case, sending charges apply.zYou cannot send or receive Chaku-moji overseas.NzEven when you receive a call whose ring tone sounded for a shorter time than the time set in “Set mute seconds” under “Ring time (sec.)”, Chaku-moji is displayed and recorded in Received calls.zSome pictograms are not displayed in 3D animation.zDepending on the status of the sender or receiver, Chaku-moji may not be displayed even when you receive a call with Chaku-moji.Ex: Voice callChaku-mojizWhen the Original lock is set on “Chaku-moji”, Chaku-moji is not displayed even if you receive a call with Chaku-moji. You can view the Chaku-moji in Received calls after releasing the lock.NzEven when you make a call using the Received calls entry, the Chaku-moji in the entry is not sent.N
12Voice/Videophone Calls■To release the “Notify Caller ID” settingX“Cancel prefix”When “Cancel prefix” is selected, the “Caller ID Notification” setting applies.3r (voice call), o (V.phone)Sending Touch-tone Signals<Pause dial>Use services such as ticket ordering or checking bank balances by sending push signals from the FOMA terminal.Register dialing data used as push signals to Pause dial beforehand, then send the data. Inserting p (pause) into the dialing data allows you to send data with a separation where a pause lies.zOnly a single entry can be saved.zYou can enter characters from 0 to 9, #, *, and p (pause) for dialing data.zYou cannot enter p (pause) in succession or at the beginning of the dialing data.1iX“Settings/NW Service”X“Dialing”X“Pause dial”■If there is dialing data already stored The stored dialing data appears.When you send the displayed dialing data as is, go to Step 3.■To delete a dialing dataXu (FUNC)X“Delete”2o (Edit)XEnter dialing dataPress 0 to 9, q or w to enter dialing data.■To enter p (pause) Xw (1 second or longer)3d (Send)XDial the phone number of the destinationA call is made to the entered phone number and the dialing data up to the first p (pause) is displayed while the dialed phone is ringing. p (pause) is not displayed.4r Each time you press r, the dialing data up to p (pause) is transmitted. When the last number is sent, the in-call screen reappears.■To transmit all dialing data at once Xj (1 second or longer)X“Send at one time”It may not be possible to send all the data at once to some recipients.Using the Prefix FunctionStore prefix numbers such as IDD Prefix code and 186/184 for showing/hiding your caller ID beforehand and add these prefix numbers when you make calls.Storing prefix numbers<Prefix setting>zUp to 7 prefix numbers can be stored.zYou can enter characters from 0 to 9, #, * and +.1iX“Settings/NW Service”X“Dialing”X“Prefix setting”■To delete prefix numbersXu (FUNC)XSelect a deletion method2Highlight an item to store or changeXo (Edit)3Enter a name4Enter a number (prefix)You can enter up to 10 digits.Making a call with a prefix number<Prefix numbers>zYou can add prefix numbers on the “Enter phone number” screen and the detail screen of “Phonebook”, “Received calls”, “Dialed calls” or “Redial”.<Example: To make a voice call by adding a prefix number on the enter phone number screen>1Enter the phone number of the other party2u (FUNC)X“Prefix numbers”XSelect a stored nameXr NzSome phones may be unable to receive push signals.
13Voice/Videophone CallsMaking a Call Specifying a Sub-Address<Sub-address setting>Set whether to specify “*” in the phone number as a separator so that the digits following “*” are recognized as a sub-address (ON or OFF).zSub-addresses are used in ISDN to identify calls made from specific communications devices and to select content in “V-live”.1iX“Settings/NW Service”X“Dialing”X“Sub-address setting”X“ON” or “OFF”Setting the Alarm for Reconnection<Reconnect signal>When the signal quality deteriorates during a voice/videophone call and the call disconnects, the FOMA terminal will automatically reconnect the call if the signal quality quickly improves. Set the type of alarm when a call is reconnected.zThe time required for reconnection varies depending on communication conditions or the signal quality. It takes about 10 seconds.1iX“Settings/NW Service”X“Talk”X“Reconnect signal”XSelect an alarm toneSelect “No tone”, “High tone” or “Low tone”.Making the Earpiece Sounds Clear<Hyper Clear Voice>This function detects ambient noise and makes the other party’s voice clear during a voice or videophone call.zWhen handsfree is on or an external device such as earphone/microphone (optional) is connected, this function is disabled.1In-call screen (p.2), Videophone in-call screen (p.2) Xp ( →→)Pressing p switches the setting in the following order: “High”→“OFF”→“Low”.High……Activate the function even when quiet, regardless of the ambient noise.Low……Activate the function only when the ambient noise is high.OFF……Deactivate the function.■To set from the main menuXiX“Settings/NW Service”X“Talk”X“Hyper Clear Voice”X“High”, “Low” or “OFF”NzIn the following cases, “*” does not function as a sub-address separator. The number including “*” is recognized as an ordinary phone number.• When “*” is entered at the beginning of a phone number • When “*” immediately follows “186” or “184” at the beginning of a phone number • When “*” immediately follows a number entered using “Prefix numbers” • When the phone number contains “*590#”, “*591#” or “*592#”NzCall charges also apply until reconnected (up to about 10 seconds).NzThis function changes the sound quality or volume. Change the setting if necessary.zThe effect may vary depending on the other party’s voice, etc.zThe ambient noise detected via the microphone activates this function. It may be activated by your voice.Voice call Videophone call
14Voice/Videophone CallsReducing Surrounding Noise to Make Voice Clear<Noise reduction>This function suppresses ambient noise and makes it easier for the other party to hear you during a voice/videophone call.1iX“Settings/NW Service”X“Talk”X“Noise reduction”X“ON” or “OFF”Talking Handsfree While Driving<In-car hands-free>You can make or receive voice calls with handsfree devices by connecting the FOMA terminal to handsfree devices such as In-Car Hands-Free Kit 01 (optional) or a car navigation system.For information on how to use the handsfree device, refer to the manual provided with the device. The FOMA In-Car Hands-Free Cable 01 (optional) is required to use the In-Car Hands-Free Kit 01.Receiving a Voice/Videophone Call1Receive a voice or videophone callThe ring tone sounds and the illumination flashes.■When you receive a call with Chaku-mojiThe Chaku-moji appears on the ringing screen or videophone ringing screen. →p.11■To put a voice/videophone call on hold while ringing→p.182r ■To answer a videophone call with the substitute imageXd (Subst.)■Operations during a videophone callYou can perform various operations such as changing the camera image to the substitute image and muting sounds during a videophone call.→p.2■To set Hyper Clear Voice →p.13■When the other party switches a voice/videophone call during a call→p.16■To put the current voice/videophone call on hold→p.183To end the call, press y NzTo operate from the handsfree device, set the USB mode to “Communication mode”.zThe display and ring tones used for incoming calls and mail follow the FOMA terminal settings.zWhen the handsfree device is set to emit sounds, the ring tone comes from the handsfree device even when in Manner mode or the Ring volume is set to “Silent”.zWhen the Public mode (Driving mode) is set, operation for incoming calls and mail follows the “Public mode (Driving mode)” settings.zWhen Record message is set, operation for incoming calls follows the “Record message” settings.zWhen the FOMA terminal is set to emit sounds, operation when the FOMA terminal is folded during a call follows “Setting when folded”. When the handsfree device is set to emit sounds, folding the FOMA terminal does not affect the call status regardless of the “Setting when folded” setting.RingingFunction menu¨p.15Videophone ringingFunction menu¨p.15
15Voice/Videophone CallsRinging screen/Videophone ringing screen (p.14)Call Rejection……Terminate the incoming call without answering it.Call Forwarding……Forward the call to the forwarding number regardless of the Activate/Deactivate setting of Call Forwarding.Voice Mail……Connect the call to the voice mail service center regardless of the Activate/Deactivate setting of Voice Mail.Change Display……Switch the display from the additional number 1 or 2 to the number from which the call is forwarded. This can be selected when the received multi number call (for additional number 1 or 2) was forwarded.Display while receiving a call■When the other party’s phone number is notifiedThe other party’s phone number appears on the screen. When the caller is stored in the phonebook, the name stored in the phonebook appears (only the name is displayed while Keypad lock is set with “Security code” set to “YES”).zIf the same phone number is registered in multiple phonebook entries with different names, the first name retrieved by Search reading appears.zIf the caller is stored as secret data, the name, etc. do not appear but only the phone number appears.zWhen you receive a call for the additional number of Multi number, the registered name of the additional number is displayed on the ringing screen.■When the other party’s phone number is not notifiedThe reason appears.■If Callback appears“Callback” appears on the ringing screen for callers who are not stored in the phonebook and stored in Redial.NzYou can use an earphone/microphone (optional) to receive a call.zIf you have subscribed to the Call waiting, Voice mail or Call forwarding service and you activate “Set in-call arrival” and set “Arrival Call Act” to “Answer”, you will hear a short double beep (“bibip”) when you receive a call during a call.• If you subscribe to the Voice Mail or Call Forwarding service, you can answer a call after ending the current call.• If you subscribe to the Call Waiting service, you can answer a voice call after putting the current call on hold, and you can answer a videophone call after ending the current call.zYou can set the operation for calls from callers not stored in the phonebook.zYou can set restrictions for each phone number stored in the phonebook.<Videophone>zYou can also answer a call by pressing o (V.phone).zIt may take a few seconds to switch from the camera image to the substitute image (Chara-den) depending on the Chara-den.
16Voice/Videophone CallsWhen the Other Party Switches a Voice/Videophone CallWhen you receive a voice/videophone call, the other party can switch between voice call and videophone call.zThe receiver cannot switch the call.zTo switch calls, the receiver needs to set “Ntfy switch-mode” beforehand.→p.24zYou can use this function with terminals compatible with voice call/videophone call switch.<Example: When the other party switched a voice call to a videophone call>1In-call screen (p.2)XThe other party switches to a videophone callX“YES”During switching, a screen appears indicating that the calls are being switched, and voice announcement is played.When a voice call is switched to a videophone call, the camera image is sent to the other party.■To send substitute image to the other partyX“NO”■When switching a videophone call to a voice callXVideophone in-call screen (p.2)XThe other party switches to a voice callThe videophone call is switched to the voice call.Pressing a Dial Key to Answer a Call<Answer setting>Turn off the ring tone or answer an incoming call quickly.1iX“Settings/NW Service”X“Incoming call”X“Answer setting”XSelect any item:Any key answer……Press any of the following keys to answer voice calls:r, d (Talk), 0 to 9, w, t, o, p, a (マナー ), b (voice calls)* You can answer a videophone call only by normal key operations (r, d (Subst.) or o (V.phone)).Quick silent……Stop the ring tone while the caller continues to hear the ringback tone by opening the FOMA terminal or pressing any of the following keys:0 to 9, w, t, b, p, a (マナー) or o (voice calls)To answer the call, press r, d (Answer/Subst.) or o (V.phone).OFF……Answer a call only by normal key operations. r, d (Answer/Subst.), o (V.phone)NzEven when set to “Quick silent”, “Any key answer” is active in Manner mode.z“Any key answer” or “Quick silent” does not work if you press 5 (ECO mode ON/OFF) or 8 (Privacy angle ON/OFF) for 1 second or longer.zWhen set to “Any key answer”, a voice call is put on hold if a (マナー ) is pressed with the FOMA terminal folded. The hold tone sounds with “Setting when folded” set to “Tone on”, but does not sound when set to “No tone” or “End the call”.
17Voice/Videophone CallsEnding/Holding Call by Folding the FOMA Terminal<Setting when folded>Set the operation to be performed when the FOMA terminal is folded during a voice or videophone call.1iX“Settings/NW Service”X“Talk”X“Setting when folded”XSelect any item:No tone……Mute the sound. For videophone calls, “Substitute image” is sent to the other party. The other party does not hear the hold tone.Tone on……Put the call on hold (holding). While the terminal is folded, the other party hears the hold tone. For videophone calls, the call hold image is sent to the other party.Speaker ON……Send the hold tone to the other party and also play it through the speaker.Speaker OFF……Send the hold tone to the other party only.End the call……End the call. This is the same operation as pressing y.Adjusting Earpiece Volume<Volume>1On the standby screenXc (1 second or longer)XUse c to adjust volumePressing c (1 second or longer) displays the earpiece volume screen. If no operation is performed for 2 seconds or longer while the earpiece volume screen is displayed, earpiece volume adjustment ends.Adjust the volume between 6 steps from “Level 1” (quietest) to “Level 6” (loudest).■To adjust the earpiece volume during a callDuring a voice call: c (1 second or longer)During a videophone call: c •a (マナー) or s (C) is also available to adjust volume.Adjusting Ring Volume<Ring volume>Adjust the ring tone volume for incoming call, mail, MessageR/F or i-concier information between 6 steps. You can also mute or gradually increase volume.1iX“Settings/NW Service”X“Incoming call”X“Ring volume”XSelect an item to adjust the volumeSelect “Phone” to adjust ring tone volume for voice calls and 64K data communication.Select “Mail” to adjust the ring tone volume for i-mode mail, Area Mail, SMS and packet communication.2Use c to adjust volumeXd (Set)■To increase volume graduallyXPress f at “Level 6” When set to “Step”, the ring volume increases every 3 seconds.NzIn Manner mode, no sound comes from the speaker even if set to “Speaker ON”.zWhen an earphone/microphone (optional) is connected, this function is disabled.zEven if set to “Tone on”, folding the FOMA terminal activates “No tone” when “Call Waiting” is switched on.zIf you fold the FOMA terminal after putting a call on hold by pressing Wt, the “Tone on” setting is disabled.NzThe volume setting adjusted during a call is retained after you end the call.
18Voice/Videophone Calls■To mute the ring toneXPress g at “Level 1” The icon on the standby screen indicates which items are set to “Silent”.: “Silent” is set for “Phone” and/or “Videophone”: “Silent” is set for “Mail”, “MessageR” and/or “MessageF”: Both “ ” and “ ” are setHolding Incoming/Current Calls<On hold/Holding><Example: To put an incoming call on hold>1While ringingXy Three short beeps sound and the call is put on hold.The caller hears an announcement that you cannot answer now, and the call is put on hold.■To put the current call on holdXDuring a callXt ■To end the call during on hold/call holdXy 2Press r to resume the call You can also press t to resume the held call.Setting the hold tone<Hold tone setting>Set the announcement to be played to the caller during on hold.zYou cannot change the hold tone played during a call.1iX“Settings/NW Service”X“Talk”X“Hold tone setting”X“On hold tone”XSelect a toneSelect “Tone 1”, “Tone 2”, “Voice announce 1*” or “Voice announce 2*”.*: Not available when no voice announcement is recorded.Using Public ModePublic mode (Driving mode/Power OFF) is an automatic answering service provided for public places and circumstances in which mobile phones should not be used.zWhen Public mode and network services are set concurrently, Voice Mail service*1, Call Forwarding service*1 and Caller ID Request service*2 take precedence over Public mode.*1 : For a voice call whose ring time is not “0 second”, a service activates after the Public mode announcement is played.*2 : When the caller notifies the caller ID, Public mode activates.zPublic mode does not work for a call from a phone number registered for Nuisance Call Blocking.Using Public Mode (Driving Mode)<Public mode (Driving mode)>When Public mode is set, a caller hears a message that you cannot answer the call because you are driving or in a place where you have to refrain from using a mobile phone (on a train or bus, in a theater, etc.), then the call ends.zPublic mode can only be set or released from the standby screen (can also be set or released when “ ” is displayed.).zYou can make calls when Public mode is set.zThis function is not available during data communication.zWhen you receive a call with no caller ID while Caller ID Request service is set to “Activate”, the caller ID request announcement is played (Public mode announcement is not played.)NzThe ring volume setting specified for “Phone” in this function is also applied to the “Select ring tone” setting for a voice call, and the alarm tones for “Schedule” and “To Do list”.NzCall charges apply while an incoming call or current call is put on hold.
19Voice/Videophone Calls1On the standby screenXw (1 second or longer)Public mode is set and “ ” appears.When you receive a call, the caller hears the announcement “The person you are calling is currently driving or in an area where cellphones should not be used. Please try again later.”■To release Public mode (Driving mode) XOn the standby screenXw (1 second or longer)Public mode is released and “ ” disappears.●When Public mode (Driving mode) is setThe ring tone does not sound when a voice call or videophone call arrives. Calls are logged as “Missed calls” in “Received calls”, and the “Missed call” desktop icon appears on the standby screen.zA voice caller hears a message that you cannot answer the call because you are driving or in the place where you have to refrain from using a mobile phone, and then the call ends.zA videophone caller sees the Public mode video message on his or her display, and then the call ends.zWhen you receive mail, the ring tone does not sound and the “New mail” desktop icon appears on the standby screen.Using Public Mode (Power OFF)<Public mode (Power OFF)>When Public mode (Power OFF) is set, a caller who made a call while the power is off hears a message that you cannot answer the call because you are in a place where you have to turn off the mobile phone (in a hospital, on an airplane, around a priority seat on a train, etc.), then the call ends.1On the standby screenXw25251Xr Public mode (Power OFF) is set (Nothing changes on the standby screen).When you receive a call after setting Public mode (Power OFF) and turning off the power, the caller hears the announcement “The person you are calling is currently in an area where use is prohibited. Please try again later.”■To release Public mode (Power OFF)XOn the standby screenXw25250Xr ■To check the Public mode (Power OFF) settingXOn the standby screenXw25259Xr ●When Public mode (Power OFF) is setThe setting is valid until “*25250” is dialed to release Public mode (Power OFF). The setting is not released by simply turning on the power.The Public mode (Power OFF) announcement is played even when you are out of service area or where the reception is very poor.zA voice caller hears a message that you cannot answer the call because you are in a place where you have to turn off the mobile phone, and then the call ends.zA videophone caller sees the Public mode (Power OFF) video message on his or her display, and then the call ends.NzThe Public mode setting takes priority even when “Record message” is “ON”.zThe Public mode setting takes priority when Manner mode is set at the same time.zIf you make an emergency call using a voice call (110, 119 or 118) while Public mode is set, Public mode is released.zThe following tones do not sound in Public mode:• Ring tone for voice call/videophone• Ring tone for mail and message• Various alarm tones• Wake-up tone• Open-Close sound• Charge sound• Software tone for i-αppli• Ring tone for packet communication/64K data communicationNzIf the power is off or “ ” is displayed, the announcement for “ ” is played instead of the Public mode message even when Public mode is set.
20Voice/Videophone CallsWhen You Cannot Answer an Incoming Call<Missed call>When you could not answer an incoming call, appears on the standby screen. When you select , you can check the date, time and caller’s name of the call.1On the standby screenXdXSelect “ ”The “Missed call list” screen appears.To check information with the FOMA terminal foldedWhen there is a missed call or new mail (i-mode mail, Area Mail, SMS), the incoming call lamp keeps flashing. Press s (C) to sound the short tone.1Press s (C) with the FOMA terminal foldedA short tone notifies you of the information in accordance with “Info notice setting”.●Flashing of the Incoming call lampWhen there is a missed call, new mail or other information, the incoming call lamp keeps flashing in the respective color set in “Illumination”.zPhone/Videophone: Color set for “Phone”zNew mail: Color set for “Mail”■Flashing colors and conditionszThe lamp does not flash when “Missed info” under “Illumination” is set to “OFF”.zWhen “Gradation” under “Illumination” is set, the lamp flashes in the default color.zYou can configure individual illumination settings in the phonebook.zThe lamp does not flash in Public mode (Driving mode).■To turn off the lampzSelect the icon for “Missed call” or “New mail” on the display to check information, or press t (1 second or longer).Setting the notification method for missed calls<Info notice setting>Set the notification method to be performed when s (C) is pressed with the FOMA terminal folded.zThe setting items and notification methods using s (C) are as follows:zThe “ボイス ” (Voice) option is available in Japanese mode, which reads out the information of incoming calls and messages (voice monitor), or the current time (voice clock).■When there is a missed call, new mail, etc.■When there is no missed call, new mail, etc.*1 : Vibration works when “Phone” of “Vibrator” is not set to “OFF”.*2 : When the color of “Illumination” is set to “Gradation”, the lamp flashes in the default color.1iX“Settings/NW Service”X“Incoming call”X“Info notice setting”XSelect “ON” or “OFF”Setting itemTone and vibration*1 IlluminationON The “Pipip, pipip” tone plays.The incoming call lamp lights for about 6 seconds in the color set for “Illumination”.If there are different types of information such as call and mail, the lamp changes to each of the corresponding color at 1-second intervals.*2Setting itemTone and vibration*1 IlluminationON The “pipipip” tone plays.The lamp flashes in “Color 12” for about 6 seconds.NzThis function alerts you using a “YES” indication when a desktop icon such as “Missed call” or “New mail” is displayed on the standby screen.zYou cannot use s (C) to check for missed calls or new mail in the following cases:• When Side key guard is set to “ON”• When playing music with Music Player/Music&Video ChannelzThe volume is determined by “Phone” under “Ring volume” (Played at “Level 2” when set to “Silent” or “Step”).zOpening the FOMA terminal during notification stops the notification.
21Voice/Videophone CallsRecording Voice/Video Messages When You Cannot Answer the Call<Record message>Have the caller leave a message on your FOMA terminal when you cannot answer a voice or videophone call.zEach message can be up to 20 seconds long, and 5 messages can be recorded for voice calls and 2 messages can be recorded for videophone calls.Setting Record message1iX“Settings/NW Service”X“Incoming call”X“Record message”XSelect any item:ON……Select Japanese 1/Japanese 2/English/Voice announce 1*/Voice announce 2*.OFF……Release the Record message setting.*: Not available when no voice announcement is recorded.2Enter the ringing time (000 to 120 seconds in 3 digits)Record message is set, and “ ” and “ ” appear on the standby screen.When “Record message” is set to “ON” and you receive a callRecord message activates when the set time has elapsed.zThe voice caller hears the answer message, and recording starts.zTo a videophone caller, the “伝言メモ準備中 Preparing” image is sent, the answer message is played, the “伝言メモ録画中 Recording” image is sent, then recording starts.■When message recording startszThe recording screen appears. The caller’s voice can be heard through the FOMA terminal earpiece during recording.■To answer a voice call during recordingXr ■To answer a videophone call during recordingXPress r to answer with the camera image or d (Subst.) to answer with the substitute image■When message recording endszThe previous screen reappears and the “Missed call” desktop icon and “Record message”/“Record VP message” desktop icon appear on the standby screen. You can check the content by selecting one of the desktop icons.→p.22zThe number of recordings is indicated by icons in the icon display area at the top of the screen. - : Record message (the number indicates the number of messages)/ : Record VP message (the number indicates the number of messages)* When Auto voice memo is set to ON, the following icons appear but the number of messages does not:: Record message: Record message and Auto voice memoNzTo give priority to the “Record message” function when “Voice Mail”, “Call Forwarding” and “Record message” are set simultaneously, set the ringing time of Record message shorter than that of Voice Mail and Call Forwarding.zIf the mute time set for “Ring time (sec.)” is longer than the ringing time set for Record message, Record message activates without ringing. To activate Record message after ringing, set the Record message ringing time longer than the mute time.zYou can use “Ring tone/Image” (individual) to set an answer message for each phone number and “Ring tone/Image” (group) to set an answer message for each group.NzWhen Manner mode is set, you cannot hear the caller’s voice during recording.zYou cannot answer another call during recording.Ex. Voice call
22Voice/Videophone CallsRecording a Message When You Cannot Answer Incoming call<Quick message>Even when “Record message” is not set to “ON”, you can record a message while receiving a call by pressing a key.1While ringingXs (C)Message recording starts.■To set Manner mode when recording startsXWhile ringingXq Playing/Deleting Record Messages/Voice Memos/Moving Picture MemoszWhen there is an unplayed recorded message, “ ” (Record message) or “ ” (Record VP message) appears on the standby screen.<Example: To check an unplayed recorded message>1On the standby screenXdXSelect “ ” (Record message) or “ ” (Record VP message)“★” appears for items recorded.■To play a message with a menu operationXiX“LifeKit”X“Play/Erase msg.” or “Play/Erase VP msg.”■To erase a recorded message or voice memoXu (FUNC)XSelect a erasing method2Select an item to play■To make a voice call or videophone call to the displayed phone number during playbackXp (voice call*), o (V.phone)*: The “Phone number entry” screen (p.2) appears. For subsequent steps, refer to “Making a Voice/Videophone call” (p.2).■To erase a message being playedXu (FUNC)X“Erase”X“YES”NzYou cannot set “Record message” to “ON” with this operation.zWhen the messages are full and you receive a voice or videophone call, Record message does not activate and the FOMA terminal keeps on ringing (when q is pressed, the ringing continues in accordance with the “Manner mode set” setting).Play/Erase msg.<Record message/Voice memo/Auto voice memo>A beep sounds and playback starts. When the playback ends, two short beeps sound and the “Play/Erase msg.” screen reappears.You can also play a message by pressing Ss (DC) on the standby screen with the FOMA terminal folded.■To play the next message while playing a messageXSs (DC)Each time you press Ss (DC), the messages are played in the following order: Record message→Voice memo →Auto voice memo.■To stop playbackXXd (Stop) or WtThe “Play/Erase msg.” screen reappears.<Record VP message>Playback starts. When the playback ends, the “Play/Erase VP msg.” screen reappears.■To play another message while playing a messageXXv■To adjust volume while playing a messageXXc■To switch the speaker on/off while playing a messageXUu (FUNC)X“Speaker ON” or “Speaker OFF”■To pause playbackXXd (Stop)To resume playback, press Xd (Play)■To stop playbackXWtThe “Play/Erase VP msg.” screen reappears.
23Voice/Videophone CallsUsing Chara-denSend a cartoon character instead of your own image when you make a videophone call. zYou can display your favorite Chara-den if you set “Substitute image” under “Select image” to “Chara-den” beforehand.You can also use Chara-den by setting Chara-den in a phonebook entry or as Ring tone/Image.zTo switch from the camera image to Chara-den during a videophone call, select “Substitute image” from the function menu.1When you receive a videophone call, press d (Subst.)2Control your character by pressing dial keysPressing a dial key makes the character perform the action assigned to the key.Setting Videophone Functions1iX“Settings/NW Service”X“Videophone”2Select any item:Visual preference……Select Normal/Prefer img qual/Prefer motion spd.Select image→p.24Auto redial as voice……Set whether to switch to a voice call when a videophone call cannot be made (ON or OFF).Display setting……Set an image to display on the main display or how to display your own camera image.Main display……Select Other side/My side as an image to display on the main display.Front camera Reverse……Set whether to display your camera image as a mirror image (ON) or normal image (OFF) on your FOMA terminal.Ntfy switch-mode→p.24Hands-free switch……Set whether to switch to handsfree automatically when starting a videophone call (ON or OFF).V.phone while packet→p.24NzWhen 2in1 is in A mode or B mode, “★” does not appear for a recorded message of the unused phone number. To play the memo, change the mode or set it to Dual mode.Chara-denVideophone settings
24Voice/Videophone CallsSetting an image to send during videophone calls<Select image>Set an image to send instead of the camera image.zYou can set a JPEG image whose file size is 100 KB or less and not larger than 854 dots wide × 854 dots high, or a GIF image whose file size is 100 KB or less and not larger than 854 dots wide × 480 dots high or 480 dots wide × 854 dots high (except file-restricted images).1Videophone settings screen (p.23)X“Select image”XSelect any item:On hold, Holding, Substitute image, Record message, Preparing, Voice memo2Select an image to sendPre-installed……Send only a message.Original……Send an image and message. To change the image, select “Change setting” from the function menu then select an image from My picture.Chara-den*……Send the image selected as “Substitute image”. To change the Chara-den, select Change setting from the function menu then select Chara-den from the Chara-den list.*: Available only when “Substitute image” is selected.Setting switch between a voice call and videophone call<Ntfy switch-mode>Set whether to let the other party know that your FOMA terminal supports switching between a voice call and videophone call.zCalls cannot be switched when set to “Indication OFF”.zYou cannot set this function during a call/when you are out of range.1Videophone settings screen (p.23)X“Ntfy switch-mode”XSelect any item:Indication ON, Indication OFF……Activate/Deactivate Ntfy switch-mode.Check Indication……Display the “Ntfy switch-mode” setting status.Setting the answer mode for a videophone call incoming during i-mode<V.phone while packet>zAs the multi access function cannot be used for videophone, incoming videophone calls during i-mode communication or while sending or receiving mail are handled according to this setting.1Videophone settings screen (p.23)X“V.phone while packet”XSelect any item:V.phone priority……Switch to the videophone ringing screen. When you answer the incoming videophone call, i-mode communication is disconnected.Packet downld priority……Reject the incoming videophone call.V.phone answerphone……Connect the call to the Voice Mail service center if you have subscribed to the Voice Mail service regardless of the Activate/Deactivate setting of Voice Mail. If you have not subscribed to this service, “Packet downld priority” applies.Call forwarding……Forward the call to the forwarding number if you have subscribed to the Call Forwarding service, regardless of the Activate/Deactivate setting of Call Forwarding. If you have not set a forwarding number or subscribed to this service, “Packet downld priority” applies.N<Visual preference>zIf the signal quality deteriorates during a videophone call, the image may become grainy or patchy regardless of the settings in “Visual preference”.<Select image>zIf you delete the original still image, the “Pre-installed” image is displayed (sent).zWhen the Chara-den character set as the substitute image is deleted and the “Chara-den” substitute image cannot be displayed, the pre-installed “ビーンズ (Beans)” is sent. If you delete the pre-installed “ビーンズ (Beans)”, the “Pre-installed” substitute still image is sent.
25Voice/Videophone CallsDecorating the videophone call screen<Decoration>Decorate your videophone call screen (your camera image) with a stamp and frame.1Videophone in-call screen (p.2)Xu (FUNC)X“Decoration”XSelect any item:Frame……Select a frame from the Frame selection screen.Stamp……Select a stamp from the Stamp selection screen and decide the paste position.■To erase a frame or stampSelect “Off decoration” from the function menu of the videophone in-call screen.Sending a message during a videophone call (sending camera image)<Petit message>1Videophone in-call screen (p.2)Xu (FUNC)X“Petit message”XEnter a messageThe message is displayed. The message disappears automatically in approximately 15 seconds.■To cancel entering a message in text entryXErase the messageXt ■To erase the message manually after it is displayedXt (1 second or longer)You can also erase a message by selecting “Off decoration” from the function menu.<Auto redial as voice>zWhen a videophone call is switched and redialed as a voice call, not digital communications charges but voice call charges apply.zWhen a call is redialed, only the voice call is logged in “Redial”/“Dialed calls”.zEven if “Auto redial as voice” is set to “ON”, dialing may not be possible depending on the network or other party, e.g. the line is busy.<Hands-free switch>zEven when “Hands-free switch” is set to “ON”, handsfree does not activate automatically in the following cases:• While Manner mode is set• When an earphone/microphone (optional) is connected (the microphone operation is in accordance with “Headset mic. setting”)• When holding a call or Record message is activated for an incoming call<V.phone while packet>zEven when “V.phone priority” is set, you cannot answer a videophone call if you are using multi access such as i-mode communication during a voice call.zWhen set to “Packet downld priority”, “V.phone answerphone” or “Call forwarding”, received videophone calls are recorded as “Missed calls” in “Received calls”.zEven when set to “V.phone priority” or “Packet downld priority”, the “Voice Mail” or “Call Forwarding” service is activated if the ring time for the “Voice Mail” or “Call Forwarding” service is set to 0 second.NNzIf “Front camera Reverse” is set to “OFF” for your camera image, the decoration is displayed normally, and a stamp with text can be read correctly.NzIf “Front camera Reverse” is set to “OFF” for your camera image, the decoration is displayed normally, and text can be read correctly.
26Voice/Videophone CallsUsing Videophone Call by Interfacing to External DeviceYou can make or receive videophone calls from external devices such as a PC by connecting the FOMA terminal to the device using the FOMA USB Cable with Charge Function 02 (Optional).To use this function, you have to install a videophone application on the dedicated external device or PC and prepare commercially available devices such as an earphone/microphone and USB compatible Web camera.zSet USB mode to “Communication mode”. No specific settings are required to connect external devices.zFor details on the operating environment, settings, operating procedure of the videophone application, refer to the manuals supplied with the external devices.z“ドコモテレビ電話ソフト” (DOCOMO Videophone Software) (Japanese) is compatible with this function.Download the software from the NTT DOCOMO website (Japanese).NzYou cannot make a videophone call from the external device during a voice call.zWhen you have subscribed to Call Waiting, Voice Mail or Call Forwarding and you receive a videophone call from an external device during a voice call, you can answer the call after ending the current call. When you receive a voice call, videophone call or 64K data communication during a videophone call from the external device, you can answer the call in the same way.
1Radio Frequency (RF) SignalsTHIS MODEL PHONE MEETS THE U.S. GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your wireless phone contains a radio transmitter and receiver. Your phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the output.Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the U.S. government-adopted requirement for safe exposure. The tests are performed on position and locations (for example, at the ear and worn on the body) as required by FCC for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is 0.503 W/kg, and when worn on the body, is 0.432 W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the U.S. government requirement.The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section at https://gullfoss2.fcc.gov/oetcf/eas/reports/GenericSearch.cfm after search on FCC ID A98-KEG4809.For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body. Non-compliance with the above restrictions may result in violation of FCC RF Exposure guidelines.* In the United States, the SAR limit for wireless mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. SAR values may vary depending upon national reporting requirements and the network band.
2FCC RegulationsThis mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Navigation menu