Musical Electronics G650 G-BOOM Wireless Boombox User Manual G Boom QSG native 102412v1

Musical Electronics Ltd G-BOOM Wireless Boombox G Boom QSG native 102412v1

user manual

USB DeviceChargingRechargeableBatteryWIRELESS BOOMBOXG-BOOMG-BOOMRuggedConstruction
PACKAGE CONTENTS: • G-BOOM Wireless Boombox • AC Power Adapter • 3.5mm Line In Audio Cable • User GuideWelcome to G-PROJECTThanks for purchasing a G-BOOM and joining the G-Project. With just the right combination of performance, durability, features, and style at the right price, our goal is to provide rugged speakers and accessories that t your modern lifestyle. We hope you agree.For more info, please visit our website at www.enterG-project.com™
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. NOTE: Any unapproved changes or modications will void the warranty. IMPORTANT SAFETY NOTIFICATIONSCAUTIONRISK OF ELECTRIC SHOCKDO NOT OPEN DANGEROUS VOLTAGE: The lightning ash with arrowhead symbol,within an equilateral triangle is intended to alert the user to the presenceof uninsulated dangerous voltage within the product’s enclosure that maybe of sufcient magnitude to constitute a risk of electric shock to persons.ATTENTION: The exclamation point within an equilateral triangle is intendedto alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WIRELESS BOOMBOXG-BOOMG-BOOM
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modications to this equipment may cause harmful interference unless the modications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modication is made.ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DELA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISES ET POUSSER JUSQU’AU FOND. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Compliance information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operationWARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WIRELESS BOOMBOXG-BOOMG-BOOMSURGE PROTECTORS: It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for this product. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.a. Do not expose this unit or the AC/DC adaptor to dripping or splashing water. Keep liquid-lled objects, such as vases, away from this unit and AC/DC adaptor.b. Only use attachments / accessories specied by the manufacturer.c. Ensure that the AC/DC adaptor is easily accessible.d. Please note the information printed underneath the unit.e. Do not impede the ventilation of this unit by covering the ventilation openings with items such as newspapers, table-cloths, curtains, etc.f. Keep open ames, such as lighted candles, away from this unit.g. Do not place this unit in closed bookcases, racks, or other spaces without proper ventilation.h. Unplug this unit during lightning storms or when unused for long periods of time.i. This unit contains a built-in rechargeable battery. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities.j. Do not expose the battery to ames or dispose of it in a reSAFETY PRECAUTIONS
LOCATION OF CONTROLS1. Power Button2. Bluetooth (Pair) Button3. EQ Button4. Reverse Button5. Play / Pause Button6. Forward Button7. Volume – Down Button8. Volume + Up Button1 7 82 3 4 5 6
WIRELESS BOOMBOXG-BOOMG-BOOMFRONT BACK12 13 14 15910 11 9. Power LED (White) 10. Cha rgin g and Low Battery LED (Red) 11. Bluetooth LED (Blue)12. DC Power Input13. USB Port14. 3.5mm Aux input 15. Reset Button
INDICATORSBLUETOOTH LEDWhen Bluetooth is in pairing mode, the Bluetooth LED will ash blue.Once Bluetooth has paired successfully, the Bluetooth LED will turn solid blue.POWER / CHARGING LEDThe red and white LEDs indicate the following statuses:Power Adapter Battery Power White LED Red LED StatusConnected Full OFF OFF OFF --Connected Not Full OFF OFF ON Battery chargingConnected Full ON ON OFF --Connected Not Full ON ON ON Battery chargingNot Connected Not Full ON ON OFF Using battery powerNot Connected Low ON ON Flash Battery lowNot Connected Empty OFF OFF OFF Power off, Cannot power on
WIRELESS BOOMBOXG-BOOMG-BOOMINDICATORS (con’t)The white LED ashes under following statuses:• Play/Pause Button on G-Boom is pressed• Forward Button or Reverse Button on G-Boom is pressed• Volume Button on G-Boom is pressed• EQ Setting indicationNOTE: The Forward and Reverse Button do NOT function when playing music through Line-in.EQUALIZER (EQ)There are 3 EQ presets: EQ1 = Flat, EQ2 = Rock, EQ3 = PopPress the EQ Button repeatedly to cycle through them. The white LED will ash1, 2 or 3 times when the EQ Button is pressed to indicate preset EQ1, EQ2 orEQ3 respectively.NOTE: The default setting is EQ1 (Flat)
POWER SOURCE Connect the supplied AC adaptor (DC 12V 2A) to the DC In jack on the back of your G-BOOM and plug the other end into a standard wall outlet (100~240V 50-60Hz).NOTES: Disconnect both ends of the power cord when not in use. Use only the supplied AC adaptor with the following specs: AC In - 100-240V AC, 50/ 60Hz / DC Out - 12V 2A.GETTING CHARGED UPFor rst time use, charge the unit for about 6 hours.After the initial charge, it takes up to 3.5 hours to charge.Fully charged battery can operate for about ??? hoursNOTES:• The battery is internal and cannot be replaced• Actual battery life varies with use, settings, and environmental conditions• Rechargeable batteries have a limited number of charge cycles• Charge the rechargeable battery at least biannuallyAC outletAC adapter’s plug
WIRELESS BOOMBOXG-BOOMG-BOOMBLUETOOTH OPERATIONYou can stream audio wirelessly to your G-BOOM from up to 33’ away using your iPhone, iPad, iPod, Android, laptop or other A2DP Bluetooth enabled device.1 Press the Power Button to turn on your G-BOOM.2 Then press the Pair Button. The blue LED on your G-BOOM will ash.3 Turn on your A2DP Bluetooth device and enable Bluetooth.4 Search for Bluetooth devices and select “G-BOOM”. If asked for a password, enter ‘0000’.5 The Blue LED on your G-BOOM will change from ashing to solid, indicating that your Bluetooth device is connected to your G-BOOMNOTE: Press and hold the Pair Button for 3 seconds to disconnect the Bluetooth connection. Your G-BOOM will return to pairing mode and the Blue LED will ash.
RECONNECTING YOURBLUETOOTH DEVICESOnce your Bluetooth device has been paired with your G-BOOM, it is simple to reconnect them.1 Make sure that your G-BOOM is powered on and within range.2 Select “G-BOOM” from the list on your Bluetooth device.3 The Blue LED on your G-BOOM will change from ashing to solid, indicating that your Bluetooth device is reconnected to your G-BOOMNOTES: For best audio performance, turn the volume on your Bluetooth source device all the way up.Your G-BOOM can only play audio from one source at a time. If your G-BOOM is connected to a Line In source, the Bluetooth will not function. Simply unplug the 3.5mm Line In audio cable and press the Pair Button to switch to Bluetooth (if necessary, select “G-BOOM” on your Bluetooth device).
WIRELESS BOOMBOXG-BOOMG-BOOMLINE IN CONNECTIONYou can also play audio from other devices using the included 3.5mm Line InAudio cable.1 Press the Power Button to turn on your G-BOOM.2 Insert one end of the 3.5mm audio cable into the Line In jack on the back of your G-BO OM. 3 Insert the other end of the 3.5mm audio cable into the Line Out or headphone jack of your external audio device (e.g. iPad, iPod shufe, mobile phone, MP3 player, digital media player, etc.)NOTE: For best audio performance and minimal distortion, avoid turning the volume on youraudio source all the way up.USB CHARGING PORTThis unit includes a USB port placed on the rear. The USB port supports powering and charging most devices including iPhones, iPads, iPods, E-readers, digital cameras and more. (USB cable sold separately).
TROUBLESHOOTINGSolutionLower the volume on your G-BOOM and/or audio sourceTurn up the volume on your G-BOOM and/or audio sourceRecharge the batteries using the included Power AdapterIf using Bluetooth, move the audio source and G-BOOM closer together(within the 33’ range)Unpair G-BOOM from your Bluetooth device (check with your device manufacturer for more information about Bluetooth pairing), then re-pair following the steps in the section BLUETOOTH OPERATIONConrm your device is A2DP Bluetooth compatible. Ensure that both your Bluetooth device and G-BOOM are not connected to any other devicesIf your G-BOOM is connected to a Line In source, the Bluetooth will not function. Unplug the 3.5mm Line In cable and press the Pair Button to switch to BluetoothUnpair G-BOOM from your Bluetooth device (check with your device manufacturer for more information about Bluetooth pairing), then re-pair following the steps in the section BLUETOOTH OPERATIONIssueDistortionNot loud enoughIntermittent sound Cannot play audiovia Bluetooth
SPECIFICATIONSClass 2 Bluetooth Ranges..............................................................................................33ft (10m)Supported Bluetooth prole.................................................................................................. A2DPPower.............................................................................................................. 2 x 9W <10% THDBattery.......................................................................... 7.4V, 1500mAh, Rechargeable Li-PolymerBattery Playback Time.......................................................................................... Up to ??? hoursBattery Recharging Time............................................................................................ ~ 3.5 hoursPower Adaptor AC Input ................................................................................. 100-240V 50-60HzPower Adaptor DC Output .................................................................................................12V 2AUSB Jack DC Power Output ................................................................................................5V 1ANOTE: Specication are subject to change without notice.
For further assistance, please visit our website at www.enterG-project.comor contact customer service at support@enterG-project.com or 1-855-896-1795Life Lab International Ltd.

Navigation menu