Motorola Solutions 89FT7606 ML900 Notebook PC w/ Wireless Radio Modem User Manual ML900 0

Motorola Solutions, Inc. ML900 Notebook PC w/ Wireless Radio Modem ML900 0

Contents

Users Manual Part 2

3-10 Managing Power
CHAPTER 4Expanding Your ComputerYou can expand the capabilities of your computer by connecting otherperipheral devices. When using a device, be sure to read the instructionsaccompanying the device together with the relevant section in thischapter.This chapter gives guidelines on installing and using these devices:l External monitorl USB devicel Serial devicel IR devicel Bluetooth-capable devicel IEEE 1394 devicel Video capture device
4-2 Expanding Your ComputerConnecting an External MonitorIf you want the benefits of a larger display screen with higher resolution,you can connect an external CRT monitor that supports the DVI interfaceto your computer.Follow this procedure to connect an external monitor:1. Make sure that the computer is not turned on.2. Plug the DVI adapter to the computer’s DVI-I port.3. Plug the signal connector to the DVI adapter.4. Plug the monitor’s power cord into an electrical outlet.5. To use the monitor, turn on the monitor before turning on thecomputer.6. The monitor should respond by default. If not, you can switch thedisplay to the monitor or to both (simultaneous display), or to multi-display by pressing Fn+F9.7. You can change display settings through your operating system(Display Properties in Windows). See your operating systemdocumentation or online help for specific information.CAUTION: Do not disconnect the external monitor while the computer is in Standbymode or Hibernation mode. If no external monitor is connected when the computerresumes, the LCD remains blank and the output is not displayed.
Expanding Your Computer 4-3Connecting a USB DeviceNOTE: To take advantage of the USB 2.0 feature, the USB 2.0 driver supplied with yourcomputer must be installed (see chapter 6).Your computer has four USB ports that supports transfer rates up to 12MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices, such asdigital camera, scanner, printer, modem, and mouse.USB is specified to be an industry standard extension to the PCarchitecture. It supports “Plug-and-Play” technology so you can installand remove USB devices without turning off the computer. With itsmultiple connection capability, up to 127 devices can be connected in adaisy-chain configuration. In addition, you can use a USB hub thatconverts a single USB connector into multiple ports where USB devicescan be connected.To connect a USB device, simply plug the device cable to one of the USBports.
4-4 Expanding Your ComputerConnecting a Serial DeviceYour computer has a serial port for connecting a serial device such as anexternal modem.Follow this procedure to connect a serial device:1. Make sure the “COM1 Ports” item is set properly in the SCUprogram. (See “Components Menu” in Chapter 5 for information.)2. Make sure the computer is not turned on.3. Plug the device cable to the serial port on the rear of the computer.4. Turn on the computer.NOTE: Portable modems that derive power through the serial port cannot be used withthe computer. Instead, use a modem that is powered by its own internal battery orexternal AC power.
Expanding Your Computer 4-5Connecting an IR DeviceYour computer has an IR (infrared) port for connecting an infrared-equipped device wirelessly such as another computer, printer, or PDA(Personal Digital Assistant).Follow this procedure to connect an IR device:1. Under Windows, make sure that the IrDA Fast Infrared Port is set toHP HSDL-2300/3600. (See “How to Use the Driver CD” in Chapter6 for information.)2. Make sure that the “COM Ports” and its “Mode Setting For COM2”items are set properly in the SCU program. (See “ComponentsMenu” in Chapter 5 for information.)3. When using the IR port:Place the transmitting device where its IR port faces the IR port ofyour computer within the effective range − within ±20-degreesvertical angle and within ±20-degrees horizontal angle at no greaterthan 0.8~1.0 meter distance.Place the receiving device where the IR port of your computer facesits IR port within the effective range − within ±15-degrees verticalangle and within ±15-degrees horizontal angle at no greater than0.8~1.0 meter distance.4. To take advantage of the IR communications, you need a third partysoftware.NOTES: During infrared communication, take note of the following:l Do not move the computer and IR device.l Do not enter Standby mode.l Do not use a cell phone or another IR device near the computer.l Avoid strong light such as sunlight or fluorescent light.l Disable the screen saver.
4-6 Expanding Your Computer
Expanding Your Computer 4-7Connecting a Bluetooth-compliant Device(option)NOTE: To take advantage of the Bluetooth feature, the Bluetooth driver supplied withyour computer must be installed (see chapter 6 for details).Your computer has a Bluetooth port for connecting a Bluetooth-compliant device wirelessly. Bluetooth is a short-range wirelesscommunications technology. Devices with Bluetooth capabilities canexchange information over a distance of about 10 meters (30 feet)without requiring a physical connection.Unlike infrared, you do not need to line up the devices to beaminformation with Bluetooth. The devices only need to be within a range ofabout 10 meters. You can even beam information to a device in adifferent room, as long as it is within range.You may use Bluetooth in the following ways:• Beam Information – such as files, appointments, tasks, and contactcards, between devices that have Bluetooth capabilities. For example,if you and a co-worker each have a device with Bluetooth, you canbeam items between your devices, such as files, contact cards,appointments, tasks, and so forth.• Create a dial-up modem connection – between your device and aBluetooth phone. You can then use the Bluetooth phone as a modem.Bluetooth operates in three different modes:• On – the Bluetooth radio is turned on and you can use Bluetoothfeatures.• Off – the Bluetooth radio is turned off. In this mode, you can neithersend nor receive information by using Bluetooth. You might want toturn the radio off at times in order to conserve battery power, or insituations where radio use is prohibited, such as on airplanes and inhospitals.
4-8 Expanding Your Computer• Discoverable – the Bluetooth radio is turned on, and all of the otherBluetooth devices within range (about 10 meters) can detect yourdevice and attempt to beam information to it, establish a bond, or use aBluetooth service. In this mode, other devices can detect your devicewhether or not a bond has been created; however, in order to receive abeam from another device, you must accept it on your device.About BondsA bond is a relationship that you create between your computer andanother Bluetooth device in order to help exchange information in asecure manner. Creating a bond involves entering the same PIN on thetwo devices you want to bond. Once a bond is created, the devices needonly have their Bluetooth radios turned on to exchange information; theydo not need to be in discoverable mode.You need only create a bond once between two devices. Thereafter, theyrecognize the bond and are able to exchange information without yourentering a PIN again.
Expanding Your Computer 4-9Connecting an IEEE 1394 DeviceYour computer has an IEEE 1394 port on the right side of the computerfor connecting 1394 devices.IEEE 1394 is the next-generation serial bus standard, featuring high-speed data transfer, multi-channel communication link, and “Hot Plug”connectivity. It allows connection of up to 63 devices. The applicationsinclude not only computer peripheral devices such as scanner, printer andhigh-quality CCD, but also consumer electronic equipment such asDVCAM and VCR.To connect an 1394 device, simply plug the device cable to the IEEE1394 port of the system.
4-10 Expanding Your ComputerConnecting a Video Capture DeviceNOTE: To take advantage of the AV input port, the Video Capture driver supplied withyour computer must be installed (see chapter 6 for details).Your computer has an AV input port on the rear of the computer forconnecting a video capture device such as high-quality CCD, as well asconsumer electronic equipment such as DVCAM and VCR.To connect a video capturing device, simply plug the device cable to theAV input port (conexant 878A PCI; BNC-type) of the system.System Memory UpgradeYou can upgrade your computer by changing system memory to amaximum of 1 GB on the two 200-pin PC2100 DDR SO-DIMM slots.However, to avoid damage during the installation procedure, please askyour dealer for help.
CHAPTER 5Setup Configuration Utility (SCU)SCU is a program for configuring the BIOS (Basic Input/Output System)settings of the computer.BIOS is a layer of software, called firmware, that translates instructionsfrom other layers of software into instructions that the computer hardwarecan understand. The BIOS settings are needed by your computer toidentify the types of installed devices and establish special features.This chapter tells you how to use the SCU program.
Setup Configuration Utility (SCU)5-2When and How to Use the SCU ProgramWhen to UseYou need to run the SCU program when:l You see an error message on the screen requesting you to run Setup.l You want to restore the factory default settings.l You want to modify some specific settings according to thehardware.l You want to modify some specific settings to optimize systemperformance.Starting SCUNOTES:l The Setup screens shown in this chapter are for your reference only. The actualitems or settings on your computer may differ.l The Setup program may have been updated after the publication of this manual.l The settings you select in your operating system might override similar settings inSetup.To run SCU, press F2 when the prompt appears in the lower left corner ofthe screen during system startup. The prompt shows up on the screen foronly a few seconds. You must press F2 quickly. The SCU menu appearsas shown next.
Setup Configuration Utility (SCU) 5-3The menu can be divided into four areas:l On the top line is the menu bar containing the titles of the availablemenus. Each menu title brings a specific menu.l The center left column of the menu contains information regardingthe current settings of the system. If you open a pull-down menu andselect an item that provides multiple options, the left column willdisplay a submenu where you can make further selections.l The right column of the menu contains details of the CPU and systemmemory.l The bottom lines of the menu provide keyboard instructions formoving around and making selections. When a menu item ishighlighted, more detailed information is given.
Setup Configuration Utility (SCU)5-4Moving Around and Making SelectionsA brief description of keyboard usage is listed next:Key Function←, →Selects a menu title.↑, ↓1) Selects an item or option.2) Brings up/down the value.Enter 1) Brings up the sub-menu when available.2) Opens or closes the options window when an item is selected.Tab Jumps from one item to another.Esc 1) Exits the SCU program.2) Returns to the previous menu if in a sub-menu.3) Closes the options window if one is open.NOTE: You are advised to use the touchpad (if enabled) as it is more straightforwardthan using the keyboard.
Setup Configuration Utility (SCU) 5-5Startup MenuDate and TimeSets the system time (Hour, Minute, Second) and date (Month, Day,Year).
Setup Configuration Utility (SCU)5-6Boot DeviceSets the first, second, third, and fourth booting device. The system willtry to boot from the first device but if it is not available, will try the nextboot device. If you set the first boot device to PXE LAN, the system willboot from the LAN server first. The options are Hard Disk C, CD-ROMDrive, Diskette A, and PXE LAN. The default setting is Diskette A, HardDisk C, CD-ROM Drive, then PXE LAN.NOTE: If you set all booting options to the same device, then the computer will try toboot from that device only.
Setup Configuration Utility (SCU) 5-7Set PasswordAllows you to set the password for your system. When typing thepassword, first make sure that Num Lk is off, then type the password in theentry fields and press Enter. Confirm your password by typing it again andpressing Enter. After setting, the password is always required to boot thecomputer.
Setup Configuration Utility (SCU)5-8Disks Menu Virus AlertSets if a warning message will appear when the hard disk boot sector(partition table) has been changed. A checkmark (ü) indicates enabled,while an underline (_) indicates disabled. The default setting is disabled.CAUTION: Set this item to disabled before installing an operating system, runningFdisk or Format program. Otherwise, the intended action will fail.
Setup Configuration Utility (SCU) 5-9HDD HeaterComponents MenuThe Components menu contains the I/O (Input/Output) configurationsettings of the system.
Setup Configuration Utility (SCU)5-10COM PortsAllows you to configure the COM ports of the computer.COM1/2/3/4 Settings sets the I/O (Input/Output) address and theInterrupt ReQuest line (IRQ) settings of the COM ports. The optionsare Disabled; COM1, 3F8, IRQ4; COM2, 2F8, IRQ3; COM3, 3E8,IRQ6; COM4, 2E8, IRQ11.Mode Setting for COM2 sets the communication compatibilitymode according to the type of the IR device to be connected. Theoptions are IrDA (HPSIR) and Fast IR. The default setting is Fast IR.This item is not valid for setting if the COM1/2/3/4 Settings item isset to Disabled.DMA Setting For Fast IR sets the DMA (Direct Memory Access)channel of the IR port in Fast IR mode. The options are DMA 0,DMA 1, and DMA 3. Default setting is DMA 0. This item is not validfor setting if the Mode Setting for COM2 item is set to IrDA(HPSIR).
Setup Configuration Utility (SCU) 5-11Pointing DeviceThis item enables or disables the touchpad. A checkmark (9) indicatesenabled, while an underline (_) indicates disabled. The default setting isdisabled.LPT PortThis item configures the parallel port of the computer.
Setup Configuration Utility (SCU)5-12Port Address sets the I/O address and the interrupt request linesettings of the parallel port. The options are None; LPT1, 378, IRQ7; LPT2, 278, IRQ 5;and LPT3, 3BC, IRQ 7. Default setting is LPT1,378, IRQ 7.Port Definition sets the operating mode for the parallel portaccording to the type of the parallel device to be connected. Yoursystem supports EPP (Enhanced Parallel Port) and ECP (ExtendedCapabilities Port) standards, which turn the standard parallel portinto a high-speed bi-directional peripheral port. The options areStandard AT (Centronics), Bidirectional (PS-2), Enhanced Parallel(EPP), and Extended Capabilities (ECP). Default setting isExtended Capabilities (ECP). This item is not valid for setting if thePort Address item is set to None.DMA Setting For ECP Mode sets the DMA (Direct MemoryAccess) channel of the ECP mode. The options are DMA 1 and DMA3. Default setting is DMA 3. This item is not valid for setting if thePort Definition item is not set to Extended Capabilities (ECP).Legacy USBThis item enables or disables the system’s support for the USB port inDOS mode.
Setup Configuration Utility (SCU) 5-13The Enable USB Port sub-item enables or disables the USB port inDOS mode. The options are enable and disable. A [X] mark indicatesenable, while blank [ ] indicates disable. Default setting is enable.The USB Keyboard sub-item enables or disables the USBkeyboard in DOS mode. The options are Enable and Disable.Default setting is Enable. This item is not valid for setting if theEnable USB Port sub-item is disabled.The USB Floppy sub-item enables or disables the USB floppy drivein DOS mode. The options are Enable and Disable. Default setting isEnable. This item is not valid for setting if the Enable USB Portsub-item is disabled.GPS
Setup Configuration Utility (SCU)5-14LCD BacklightFn+F11: Enabled/Disabled the LCD Backlight On/Off.
Setup Configuration Utility (SCU) 5-15Power MenuThermal Zone
Setup Configuration Utility (SCU)5-16SpeedStep SupportEnables or disables the Geyserville feature of the CPU. The Geyservillefeature helps conserve battery life by decreasing the CPU’s running speedunder certain conditions while still maintaining a high performance. If thisitem is enabled, the CPU will automatically change its speed whenevernecessary based on the “Power Scheme” setting in Windows’s Control Panel.If this item is disabled, the CPU will always run in the lowest speed (600MHz).
Setup Configuration Utility (SCU) 5-17Exit MenuThe Exit menu allows you to leave the SCU program. After finished withyour settings, you must save and exit so that the new settings can takeeffect.Save and Exit saves the changes you have made and exit the SCUprogram.Exit (No Save) exits the SCU program without saving the changes youhave made.Default Settings loads factory default values for all the items.Restore Settings restores previous values for all the items.Version Info displays the BIOS version information.
Setup Configuration Utility (SCU)5-18
CHAPTER 6Installing Software DriversTo take full advantage of the unique features of your computer, someoperating systems require custom software, known as drivers, to beinstalled.If you purchased the computer with Windows pre-installed, your dealermay have already installed the drivers. If not, you need to install thedrivers using the driver CD supplied with your computer.This chapter describes how to install the drivers.
6-2 Installing Software DriversHow to Use the Driver CDNOTES:•The drivers may have been updated after this manual was published. For driverupgrade, please contact your dealer.•You can always find README or document files on the driver CD. These files contain the latest information from the software supplier. Please read the files together with this chapter.•This driver CD supports Windows 2000 and Windows XP only.•The available items may differ according to your computer model and operationsystem.An autorun program is provided on the driver CD to help you easilyinstall the drivers. As you insert the driver CD, the autorun programautomatically starts. If you need to start the program manually, run theAutorun.exe program from the Setup directory of the driver CD.The main screen appears as shown next:
Installing Software Drivers 6-3Installing Drivers for Windows 2000To set up the necessary drivers for Windows 2000, click on “Windows2K” on the initial screen. The following screen appears:Drivers on the First PageTo install the necessary driver, just click on the particular option andfollow the onscreen instructions to continue and complete installation.Application Installs the Intel® Application Accelerator to improveperformance of the storage sub-system and overallsystem performance. This software delivers improvedperformance through several ingredient technologies(components).Chipset Ensures the full function of the following drivers.Install this main chipset driver before installing thedevice drivers.
6-4 Installing Software DriversDirectX 8.1 Allows you to take full advantage of the multimediaapplications.VGA Allows you to select high-resolution displays withricher colors. It can drive LCD displays as well asCRT displays.Audio Allows you to take full advantage of the audiosubsystem.Upon clicking “Next Page,” the following screen appears:Drivers on the Second PageUSB 2.0 Allows your system to connect to USB 2.0 devices.LAN Allows you to use the network function of thecomputer.Touchpad Allows you to take full advantage of the touchpad andthe scroll button features.Touchscreen Allows you to use your fingers as a pointing device onthe LCD screen (refer to the next section for furtherinstructions).

Navigation menu