Motorola Solutions 89FT7104 LEX L11 Mission Critical LTE Device User Manual LEX L11 Mission Critical LTE Device User Guide

Motorola Solutions, Inc. LEX L11 Mission Critical LTE Device LEX L11 Mission Critical LTE Device User Guide

User Manual

LEX L11 Mission-CriticalLTE Device User GuideRelease 1.0MN005019A01-BJULY 2018© 2018 Motorola Solutions, Inc. All rights reserved
CopyrightsThe Motorola Solutions products described in this document may include copyrighted MotorolaSolutions computer programs. Laws in the United States and other countries preserve for MotorolaSolutions certain exclusive rights for copyrighted computer programs. Accordingly, any copyrightedMotorola Solutions computer programs contained in the Motorola Solutions products described in thisdocument may not be copied or reproduced in any manner without the express written permission ofMotorola Solutions.© 2018 Motorola Solutions, Inc. All Rights ReservedNo part of this document may be reproduced, transmitted, stored in a retrieval system, or translatedinto any language or computer language, in any form or by any means, without the prior writtenpermission of Motorola Solutions, Inc.Furthermore, the purchase of Motorola Solutions products shall not be deemed to grant either directlyor by implication, estoppel or otherwise, any license under the copyrights, patents or patentapplications of Motorola Solutions, except for the normal non-exclusive, royalty-free license to use thatarises by operation of law in the sale of a product.DisclaimerPlease note that certain features, facilities, and capabilities described in this document may not beapplicable to or licensed for use on a specific system, or may be dependent upon the characteristics ofa specific subscriber unit or configuration of certain parameters. Please refer to your MotorolaSolutions contact for further information.TrademarksMOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks orregistered trademarks of Motorola Trademark Holdings, LLC and are used under license. All othertrademarks are the property of their respective owners.European Union (EU) Waste of Electrical and Electronic Equipment (WEEE)directive The European Union's WEEE directive requires that products sold into EU countries must havethe crossed out trash bin label on the product (or the package in some cases).As defined by the WEEE directive, this cross-out trash bin label means that customers and end-usersin EU countries should not dispose of electronic and electrical equipment or accessories in householdwaste.Customers or end-users in EU countries should contact their local equipment supplier representative orservice centre for information about the waste collection system in their country.MN005019A01-BCopyrights2
Contact UsMotorola Solutions Support CenterThe Solutions Support Center (SSC) is the primary contact for technical support included in yourorganization's service agreement with Motorola Solutions.Service agreement customers should be sure to call the SSC in all situations listed under CustomerResponsibilities in their agreement, such as:• Before reloading software.• To confirm troubleshooting results and analysis before taking action.Your organization received support phone numbers and other contact information appropriate for yourgeographic region and service agreement. Use that contact information for the most efficient response.However, if needed, you can also find general support contact information on the Motorola Solutionswebsite, by following these steps:• Enter motorolasolutions.com in your browser• Ensure that your organization's country or region is displayed on the page. Clicking or tapping thename of the region provides a way to change it.• Select "Support" on the motorolasolutions.com page.CommentsSend questions and comments regarding user documentation to documentation@motorolasolutions.com.Provide the following information when reporting a documentation error:• The document title and part number• The page number or title of the section with the error• A description of the errorMN005019A01-BContact Us 3
Document HistoryVersion Description DateMN005019A01-A Original release of the LEX L11 Mission-Critical LTEDevice User GuideMay 2018MN005019A01-B Second release of the LEX L11 Mission-Critical LTEDevice User GuideThe following sections were updated:•Important Safety Information on page 20•Regulatory Information on page 21•Accessories on page 105•Enabling Hearing Aid Compatibility on page 55•Switching Between PSX PTT App and LMR Ra-dio for PTT Communications on page 72•Technical Specifications on page 118July 2018MN005019A01-BDocument History4
ContentsCopyrights................................................................................................................... 2Contact Us................................................................................................................... 3Document History....................................................................................................... 4List of Figures............................................................................................................11List of Tables............................................................................................................. 12List of Processes...................................................................................................... 13List of Procedures.....................................................................................................14About This Manual.................................................................................................... 18What is Covered in This Manual..................................................................................................18Helpful Background Information.................................................................................................. 18Related Information..................................................................................................................... 18Important Safety Information....................................................................................................... 20Service Information......................................................................................................................20Regulatory Information................................................................................................................ 21Versions.......................................................................................................................................23Notational Conventions................................................................................................................23Icon Conventions......................................................................................................................... 23Chapter 1: Getting Started........................................................................................241.1 Device Overview....................................................................................................................241.2 Package Contents................................................................................................................. 261.3 Setting Up the Device............................................................................................................ 271.3.1 Dual SIM Functionality............................................................................................. 271.3.2 Inserting SIM Cards................................................................................................. 271.3.2.1 Removing SIM Cards................................................................................. 281.3.3 Installing a MicroSD Card........................................................................................ 281.3.3.1 Removing a MicroSD Card........................................................................ 291.3.4 Installing the Battery................................................................................................ 291.3.4.1 Removing the Battery.................................................................................291.3.5 Attaching Battery Cover........................................................................................... 301.3.5.1 Removing the Battery Cover...................................................................... 301.3.6 Charging Information............................................................................................... 301.3.6.1 Battery Charge Indicators.......................................................................... 311.3.6.2 Turning On Battery Saving Mode...............................................................321.4 Powering On the Device for the First Time............................................................................321.5 Powering On.......................................................................................................................... 34MN005019A01-BContents 5
1.6 Powering Off.......................................................................................................................... 341.7 Battery Management............................................................................................................. 341.7.1 Battery Usage Monitor............................................................................................. 341.7.2 Low Battery Notification........................................................................................... 351.7.3 Battery Optimization.................................................................................................351.7.3.1 Entering Airplane Mode..............................................................................36Chapter 2: Basic Functions......................................................................................372.1 Home Screen.........................................................................................................................372.2 Touchscreen Navigation........................................................................................................ 382.3 On-Screen Keyboard............................................................................................................. 392.3.1 Google Keyboard Settings....................................................................................... 392.3.2 Google Voice Typing................................................................................................402.3.2.1 Adjusting Google Voice Typing Settings.................................................... 402.4 Status Bar Icons.................................................................................................................... 412.5 Switching to Multiple Active Windows View...........................................................................412.6 Accessing Files from a Computer..........................................................................................42Chapter 3: Device Settings.......................................................................................433.1 Covert Mode.......................................................................................................................... 433.1.1 Turning On Covert Mode......................................................................................... 433.1.2 Turning Off Covert Mode......................................................................................... 443.1.3 Configuring Covert Mode......................................................................................... 443.2 Setting Programmable Buttons..............................................................................................443.3 LEX Series Screen Lock........................................................................................................453.3.1 Selecting a Locking Option...................................................................................... 453.3.2 Setting Timeout for Locking..................................................................................... 473.3.3 Device Unlock.......................................................................................................... 473.3.3.1 Unlocking the LEX Device Using a Pattern................................................473.3.3.2 Unlocking the LEX Device Using a PIN or Password................................ 473.3.3.3 Setting Unlock with Fingerprint.................................................................. 483.3.4 Calling Emergency from a Locked LEX Device....................................................... 493.4 Setting Date and Time........................................................................................................... 503.5 Setting the Display.................................................................................................................503.5.1 Setting Screen Brightness Level..............................................................................503.5.2 Setting Adaptive Brightness.....................................................................................513.5.3 Changing Wallpapers...............................................................................................513.5.4 Setting Up Sleep Mode............................................................................................ 513.5.5 Setting Up Screen Saver......................................................................................... 513.5.6 Setting Font Size......................................................................................................513.5.7 Setting Display Size................................................................................................. 52MN005019A01-BContents6
3.5.8 Setting Screen Rotation........................................................................................... 523.5.9 Enabling Cast Screen.............................................................................................. 523.6 Sound Settings...................................................................................................................... 523.6.1 Adjusting Sound Settings.........................................................................................523.6.2 Enabling Howling Suppression................................................................................ 533.6.2.1 Disabling Howling Suppression..................................................................533.6.3 Setting Up Do Not Disturb........................................................................................543.6.3.1 Setting Automatic Rules.............................................................................543.6.4 Enabling Hearing Aid Compatibility..........................................................................553.6.4.1 Disabling Hearing Aid Compatibility........................................................... 56Chapter 4: Wireless...................................................................................................574.1 Bluetooth Profiles...................................................................................................................574.2 Bluetooth Power States......................................................................................................... 584.3 Enabling Bluetooth.................................................................................................................584.4 Disabling Bluetooth................................................................................................................594.5 Renaming the Device............................................................................................................ 594.6 Pairing LEX with Bluetooth Devices...................................................................................... 594.6.1 Managing Bluetooth Devices................................................................................... 594.7 Connecting to Wi-Fi Networks............................................................................................... 60Adding New Networks.......................................................................................................60Editing Networks............................................................................................................... 60Forgetting Networks..........................................................................................................604.8 Configuring Wi-Fi Hotspots....................................................................................................614.9 Setting Up USB Tethering..................................................................................................... 624.10 Configuring Bluetooth Tethering.......................................................................................... 624.11 Near-Field Communication.................................................................................................. 624.11.1 Turning NFC On.....................................................................................................634.11.2 Turning NFC Off.....................................................................................................63Chapter 5: Contacts.................................................................................................. 645.1 Adding New Contacts............................................................................................................ 645.2 Editing Contact Details.......................................................................................................... 645.3 Searching Contacts............................................................................................................... 645.4 Sharing Contacts................................................................................................................... 65Chapter 6: Calling......................................................................................................666.1 Making Calls.......................................................................................................................... 666.1.1 Setting Up Speed Dial..............................................................................................676.2 Making Conference Calls.......................................................................................................676.3 Answering Calls with a Bluetooth Headset............................................................................ 686.4 Call Settings...........................................................................................................................69MN005019A01-BContents 7
Chapter 7: Messaging...............................................................................................707.1 Sending Messages................................................................................................................ 70Chapter 8: Collaboration with LMR Radios............................................................ 728.1 Switching Between PSX PTT App and LMR Radio for PTT Communications...................... 728.2 Pairing Radio with the LEX Device ....................................................................................... 748.3 Unpairing Radio from the LEX Device................................................................................... 758.4 Selecting Zones and Channels..............................................................................................758.5 Adding Favorite Talkgroups...................................................................................................768.6 Selecting Talkgroups............................................................................................................. 778.7 Sending PTT Audio................................................................................................................778.8 Selecting Audio Routing Options........................................................................................... 778.8.1 Adjusting Sound Volume..........................................................................................788.9 Emergency Mode on LEX Device Paired with LMR.............................................................. 79Chapter 9: Emergency Services.............................................................................. 809.1 Emergency Mode Alert Settings............................................................................................ 809.1.1 Enabling Emergency Mode......................................................................................809.2 Emergency Calls....................................................................................................................809.2.1 Making Emergency Calls......................................................................................... 819.3 Configuring Emergency Broadcast Alert Settings..................................................................81Chapter 10: IMS VoLTE.............................................................................................8210.1 Making IMS VoLTE Calls.....................................................................................................8210.2 Making IMS Video Calls.......................................................................................................8310.2.1 Receiving IMS Video Calls.....................................................................................8410.2.2 Enabling IMS Video Calling .................................................................................. 8510.3 Making IMS Multi-Party Conference Calls........................................................................... 8610.4 IMS Voicemail......................................................................................................................8710.4.1 Enabling IMS VoiceMail Notification Sounds ........................................................ 8710.5 IMS Supplementary Services.............................................................................................. 8810.5.1 Placing IMS VoLTE Call on Hold .......................................................................... 8810.5.2 Enabling IMS Call Waiting..................................................................................... 8910.5.3 Enabling IMS Call Forwarding............................................................................... 8910.5.4 Enabling IMS Call Barring......................................................................................9010.5.5 Enabling and Disabling Caller ID in an IMS System.............................................. 9010.6 IMS Messaging.................................................................................................................... 9110.6.1 Enabling IMS Group Messaging ........................................................................... 91Chapter 11: Applications..........................................................................................9311.1 Applications......................................................................................................................... 9311.2 Camera................................................................................................................................ 9511.2.1 Taking Photos........................................................................................................ 95MN005019A01-BContents8
11.2.2 Recording Videos...................................................................................................9611.3 Gallery................................................................................................................................. 9711.3.1 Albums................................................................................................................... 9711.3.1.1 Sharing Albums........................................................................................9711.3.1.2 Checking Album Information.................................................................... 9711.3.1.3 Deleting Albums....................................................................................... 9811.3.2 Photos....................................................................................................................9811.3.2.1 Viewing and Browsing Photos..................................................................9811.3.2.2 Rotating Photos........................................................................................9811.3.2.3 Cropping Photos...................................................................................... 9911.3.2.4 Setting Photos as Contact Icons.............................................................. 9911.3.2.5 Sharing Photos.......................................................................................10011.3.2.6 Deleting Photos......................................................................................10011.3.3 Videos.................................................................................................................. 10011.3.3.1 Watching Videos.................................................................................... 10011.3.3.2 Sharing Videos.......................................................................................10111.3.3.3 Deleting Videos...................................................................................... 10111.4 Turning On the Flashlight.................................................................................................. 10211.5 Taking Screen Captures.................................................................................................... 10211.6 Managing Downloads........................................................................................................ 10211.7 Exploring Files................................................................................................................... 10311.8 Public Safety Experience (PSX) Applications....................................................................103Chapter 12: Accessories........................................................................................ 10512.1 Accessories....................................................................................................................... 105Chapter 13: Maintenance and Troubleshooting...................................................10713.1 Installing Firmware Updates.............................................................................................. 10713.2 Maintaining LEX Device ....................................................................................................10713.3 Battery Safety Guidelines.................................................................................................. 10813.4 Cleaning Guidelines...........................................................................................................10813.5 Cleaning LEX Device.........................................................................................................10913.6 Cleaning Interface Connector............................................................................................ 11013.7 Cleaning Battery Contacts................................................................................................. 11013.8 Troubleshooting................................................................................................................. 11013.9 Backing up Contacts with Android..................................................................................... 11413.10 Backing Up LEX Data Manually.......................................................................................11513.11 Syncing Data with Google............................................................................................... 11513.12 Backing Up Your Data and Settings with Android Backup Service................................. 11513.13 Restoring Contact Data................................................................................................... 11613.14 Restoring Your Data and Settings................................................................................... 116MN005019A01-BContents 9
13.15 Resetting the LEX Device................................................................................................117Appendix A: Technical Specifications.................................................................. 118MN005019A01-BContents10
List of FiguresFigure 1: LEX L11 Overview...................................................................................................................24Figure 2: LEX L11 Top........................................................................................................................... 25Figure 3: LEX L11 Side Buttons Overview............................................................................................. 26Figure 4: LEX L11 SIM Card Tray.......................................................................................................... 27Figure 5: MicroSD Card Insertion........................................................................................................... 28Figure 6: Battery Cover Removal Slot.................................................................................................... 30Figure 7: LEX L11 Welcome Screen...................................................................................................... 33Figure 8: Battery Screen.........................................................................................................................35Figure 9: LEX L11 Home Screen Overview............................................................................................37Figure 10: Notifications Panel.................................................................................................................42Figure 11: Set up WLAN Hotspot Dialog Box.........................................................................................61Figure 12: PSX Cockpit Sidebar Menu...................................................................................................73Figure 13: Push to Talk Screen.............................................................................................................. 73Figure 14: Secure Pairing Screen.......................................................................................................... 74Figure 15: Radio Services Overflow Menu............................................................................................. 75Figure 16: Channel Selection Screen.....................................................................................................76Figure 17: Navigation in the Channel Selection Screen......................................................................... 76Figure 18: Radio Volume Slidebar..........................................................................................................79Figure 19: Receiving Video Call............................................................................................................. 85Figure 20: Mode Selection Bar............................................................................................................... 95Figure 21: Mode Selection Bar............................................................................................................... 96Figure 22: Mode Selection Bar............................................................................................................... 96Figure 23: Video Playback Controls..................................................................................................... 101MN005019A01-BList of Figures 11
List of TablesTable 1: Motorola Documentation.......................................................................................................... 19Table 2: Motorola Solutions Accessories and Energy Documentation...................................................20Table 3: LEX L11 Back and Front.......................................................................................................... 24Table 4: LEX L11 Top.............................................................................................................................25Table 5: LEX L11 Side Buttons.............................................................................................................. 26Table 6: LEX L11 Notification LEDs....................................................................................................... 31Table 7: LEX L11 Home Screen.............................................................................................................37Table 8: On-Screen Navigation Buttons................................................................................................. 38Table 9: Touchscreen Actions................................................................................................................ 38Table 10: Google Keyboard Settings......................................................................................................39Table 11: Status Bar Icons..................................................................................................................... 41Table 12: Bluetooth Profiles................................................................................................................... 57Table 13: Message Media Type............................................................................................................. 70Table 14: ASTRO (APX) Radios Supported by LEX L11....................................................................... 72Table 15: TETRA Radios Supported by LEX L11.................................................................................. 72Table 16: Calling Accounts Setting.........................................................................................................89Table 17: LEX L11 Applications............................................................................................................. 93Table 18: Carry Accessories................................................................................................................ 105Table 19: Chargers (USB-C)................................................................................................................ 105Table 20: Batteries............................................................................................................................... 106Table 21: Troubleshooting the LEX Series Device...............................................................................110Table 22: For LEX Devices with Dual SIMs (Private Network and Public Network).............................113Table 23: Technical Specifications....................................................................................................... 118MN005019A01-BList of Tables12
List of ProcessesSetting Up the Device ............................................................................................................................27MN005019A01-BList of Processes 13
List of ProceduresInserting SIM Cards ...............................................................................................................................27Removing SIM Cards ............................................................................................................................ 28Installing a MicroSD Card ......................................................................................................................28Removing a MicroSD Card ....................................................................................................................29Installing the Battery .............................................................................................................................. 29Removing the Battery ............................................................................................................................ 29Attaching Battery Cover .........................................................................................................................30Removing the Battery Cover ................................................................................................................. 30Turning On Battery Saving Mode .......................................................................................................... 32Powering On the Device for the First Time ............................................................................................32Powering On ..........................................................................................................................................34Powering Off ..........................................................................................................................................34Entering Airplane Mode ......................................................................................................................... 36Google Voice Typing ............................................................................................................................. 40Adjusting Google Voice Typing Settings ............................................................................................... 40Switching to Multiple Active Windows View ...........................................................................................41Accessing Files from a Computer ..........................................................................................................42Turning On Covert Mode ....................................................................................................................... 43Turning Off Covert Mode ....................................................................................................................... 44Configuring Covert Mode .......................................................................................................................44Setting Programmable Buttons ..............................................................................................................44Selecting a Locking Option ....................................................................................................................45Setting Timeout for Locking ...................................................................................................................47Unlocking the LEX Device Using a Pattern ........................................................................................... 47Unlocking the LEX Device Using a PIN or Password ............................................................................47Setting Unlock with Fingerprint ..............................................................................................................48Unlocking the Device by Using the Fingerprint Sensor ......................................................................... 49Calling Emergency from a Locked LEX Device .....................................................................................49Setting Date and Time ...........................................................................................................................50Setting Screen Brightness Level ........................................................................................................... 50Setting Adaptive Brightness .................................................................................................................. 51Changing Wallpapers ............................................................................................................................ 51Setting Up Sleep Mode ..........................................................................................................................51Setting Up Screen Saver ....................................................................................................................... 51Setting Font Size ................................................................................................................................... 51Setting Display Size ...............................................................................................................................52MN005019A01-BList of Procedures14
Setting Screen Rotation .........................................................................................................................52Enabling Cast Screen ............................................................................................................................52Adjusting Sound Settings ...................................................................................................................... 52Enabling Howling Suppression ..............................................................................................................53Disabling Howling Suppression ............................................................................................................. 53Setting Up Do Not Disturb ..................................................................................................................... 54Setting Automatic Rules ........................................................................................................................ 54Enabling Hearing Aid Compatibility ....................................................................................................... 55Disabling Hearing Aid Compatibility ...................................................................................................... 56Enabling Bluetooth ................................................................................................................................ 58Disabling Bluetooth ................................................................................................................................59Renaming the Device ............................................................................................................................ 59Pairing LEX with Bluetooth Devices ...................................................................................................... 59Managing Bluetooth Devices .................................................................................................................59Connecting to Wi-Fi Networks ............................................................................................................... 60Adding New Networks ........................................................................................................................... 60Editing Networks ....................................................................................................................................60Forgetting Networks .............................................................................................................................. 60Configuring Wi-Fi Hotspots ....................................................................................................................61Setting Up USB Tethering ..................................................................................................................... 62Configuring Bluetooth Tethering ............................................................................................................62Turning NFC On .................................................................................................................................... 63Turning NFC Off .................................................................................................................................... 63Adding New Contacts ............................................................................................................................ 64Editing Contact Details .......................................................................................................................... 64Searching Contacts ............................................................................................................................... 64Sharing Contacts ................................................................................................................................... 65Making Calls .......................................................................................................................................... 66Setting Up Speed Dial ........................................................................................................................... 67Making Conference Calls ...................................................................................................................... 67Answering Calls with a Bluetooth Headset ............................................................................................68Sending Messages ................................................................................................................................ 70Switching Between PSX PTT App and LMR Radio for PTT Communications ...................................... 72Pairing Radio with the LEX Device ........................................................................................................74Unpairing Radio from the LEX Device ...................................................................................................75Selecting Zones and Channels ..............................................................................................................75Adding Favorite Talkgroups ...................................................................................................................76Selecting Talkgroups ............................................................................................................................. 77Sending PTT Audio ............................................................................................................................... 77MN005019A01-BList of Procedures 15
Selecting Audio Routing Options ...........................................................................................................77Adjusting Sound Volume ....................................................................................................................... 78Enabling Emergency Mode ................................................................................................................... 80Making Emergency Calls .......................................................................................................................81Configuring Emergency Broadcast Alert Settings ................................................................................. 81Making IMS VoLTE Calls .......................................................................................................................82Making IMS Video Calls ........................................................................................................................ 83Receiving IMS Video Calls .................................................................................................................... 84Enabling IMS Video Calling ................................................................................................................... 85Making IMS Multi-Party Conference Calls .............................................................................................86Enabling IMS VoiceMail Notification Sounds .........................................................................................87Placing IMS VoLTE Call on Hold ...........................................................................................................88Enabling IMS Call Waiting ..................................................................................................................... 89Enabling IMS Call Forwarding ............................................................................................................... 89Enabling IMS Call Barring ..................................................................................................................... 90Enabling and Disabling Caller ID in an IMS System ..............................................................................90IMS Messaging ......................................................................................................................................91Enabling IMS Group Messaging ............................................................................................................91Taking Photos ........................................................................................................................................95Recording Videos .................................................................................................................................. 96Sharing Albums ..................................................................................................................................... 97Checking Album Information ................................................................................................................. 97Deleting Albums .................................................................................................................................... 98Viewing and Browsing Photos ............................................................................................................... 98Rotating Photos ..................................................................................................................................... 98Cropping Photos ....................................................................................................................................99Setting Photos as Contact Icons ........................................................................................................... 99Sharing Photos .................................................................................................................................... 100Deleting Photos ................................................................................................................................... 100Watching Videos ..................................................................................................................................100Sharing Videos .................................................................................................................................... 101Deleting Videos ................................................................................................................................... 101Turning On the Flashlight .................................................................................................................... 102Taking Screen Captures ......................................................................................................................102Managing Downloads .......................................................................................................................... 102Exploring Files ..................................................................................................................................... 103Installing Firmware Updates ................................................................................................................ 107Cleaning Interface Connector ..............................................................................................................110Cleaning Battery Contacts ...................................................................................................................110MN005019A01-BList of Procedures16
Backing up Contacts with Android .......................................................................................................114Backing Up LEX Data Manually .......................................................................................................... 115Syncing Data with Google ................................................................................................................... 115Backing Up Your Data and Settings with Android Backup Service ..................................................... 115Restoring Contact Data ....................................................................................................................... 116Restoring Your Data and Settings ....................................................................................................... 116Resetting the LEX Device ....................................................................................................................117MN005019A01-BList of Procedures 17
About This ManualThis guide provides information about using the LEX L11 Mission-Critical LTE Device, its basic Androidfeatures, and features added by Motorola Solutions. Motorola Solutions features include a RadioServices application for collaboration with supported Land Mobile Radio (LMR) models, such asASTRO 25 APX and TETRA MTP radios.Screens and menu options may be changed or customized by your agency to show differentinformation.What is Covered in This ManualThis manual contains the following chapters:•Getting Started on page 24 explains getting the LEX device up and running for the first time.•Basic Functions on page 37 describes basic functions of the LEX device, such as touchscreennavigation, on-screen keyboard settings, and others.•Device Settings on page 43 describes the settings available on the device.•Wireless on page 57 explains configuring the device to operate in wireless networks.•Contacts on page 64 covers the Contacts application.•Calling on page 66 describes using the Phone application, for example making calls, conferencecalls, and others.•Messaging on page 70 covers sending text and multimedia messages.•Collaboration with LMR Radios on page 72 is a reference to connecting the LEX device to a LandMobile Radio for communicating on LTE, TETRA, and ASTRO systems.•Emergency Services on page 80 explains emergency functions of the device.•IMS VoLTE on page 82 covers communication in the IP Multimedia Core Network Subsystem(IMS), if present in your phone's network.•Applications on page 93 describes applications available for the LEX device.•Accessories on page 105 provides information on accessories compatible with the LEX L11 device.•Maintenance and Troubleshooting on page 107 provides solutions to most common problemsrelated to the LEX device.•Technical Specifications on page 118 contains technical details of the LEX device.Helpful Background InformationMotorola Solutions offers various courses designed to assist in learning about the system.For more information on current course offerings and technology paths, visit http://www.motorolasolutions.com/training.Related InformationIt is recommended that you obtain access to the following documentation.Unless otherwise specified, the Motorola Solutions documents listed here are available to users with alogin account at https://learning.motorolasolutions.com. You can search for LEX device manuals byentering LEX in the Search Catalog field.MN005019A01-BAbout This Manual18
You can also access the manuals on the device by tapping LEX Docs on the device home screen.You are redirected to the Motorola Solutions learning portal, where you can download the LEXmanuals and view them.For information on warranty terms, see the Support page at https://www.motorolasolutions.com. Forinstructions on accessing the appropriate Support page for your region, see Contact Us on page 3.Table 1: Motorola DocumentationRelated Information PurposeLEX L11 Mission-Critical LTE Device QuickStart GuideProvides initial tasks for the physical setup ofthe LEX L11 Mission-Critical LTE Device, in-cluding SIM card and battery installation, andcharging using the USB-C cable.NOTICE: For information aboutcharger accessories available fromMotorola Solutions, contact your de-vice technician or device administra-tor.RF Energy Exposure Training and ProductSafety Information for Mission Critical DevicesDescribes how to safely use mission critical de-vices.LEX L11 Mission-Critical LTE Device ServiceProvisioning and Management GuideProvides field technician with instructions for ac-tivating LEX L11 devices on the broadband net-work with the configuration required by theirusers and organization.WAVE 7000 PSX Push-to-Talk for Mobile Devi-ces manualDescribes how to use the PTT application thatoffers services over 4G, 3G, or WiFi network.WAVE Mobile Communicator PTT User Guide Provides instructions for installing, configuring,and operating the WAVE Mobile Communicatoron Android and iOS devices, for use in a WAVE5000 Management Server domain or www.waveoncloud.com.Tutorial for Motorola Solutions carrier-basedPush-To-Talk app, such as Enhanced Push-To-Talk for Android from AT&T.Browser-based tutorial is accessible from theuser interface of the Android PTT application,under Settings. For additional information, con-tact your service provider.PSX User Guide This manual provides basic operation proce-dures for PSX mobile application suite (dedicat-ed chapters for Cockpit, Mapping, and Messen-ger), including necessary operator and systemcontext.PSX Secure Calling User Guide Provides information about the Private Teleph-ony Solution PSX Secure Calling client forVoice Over IP (VoIP) services available fromMotorola Solutions for its Public Safety LTEsystems.MN005019A01-BAbout This Manual 19
Table 2: Motorola Solutions Accessories and Energy DocumentationDocument PurposeMN004688A01 LEX L11 Holster User Manual A user guide that describes how to use the hol-ster.MN004687A01 LEX L11 Cradle Quick StartGuideA quick start guide that describes how to startusing the LEX L11 cradle in no time.MN003440A01 LEX L11 Multi Unit ChargerUser ManualA user guide that describes how to use the Mul-ti-Unit Charger.MN003922A01 LEX L11 Multi Unit ChargerSafety LeafletA safety information leaflet that describes LEXL11 Charger Kits.MN004263A01 LEX L11 IMPRES 2 AdaptiveUnit Charger User GuideA user manual that describes how to use theIMPRES 2 Adaptive Unit Charger.MN004594A01 LEX L11 IMPRES 2 Dual OrSingle Unit Chargers Safety LeafletA safety leaflet that describes the IMPRES 2Dual Or Single Unit Chargers.Important Safety InformationRF Energy Exposure Training and Product Safety Information for Mission Critical Devices.NOTICE:ATTENTION! This mission critical device is restricted to Occupational use only. Before usingthe mission critical device, read the RF Energy Exposure Training and Product SafetyInformation for Mission Critical Devices manual which contains important operating instructionsfor safe usage and RF energy awareness and control for Compliance with applicable standardsand Regulations. This equipment is designed and manufactured not to exceed the emissionlimits for exposure to radio frequency (RF) energy set by the Federal CommunicationsCommission of the U.S. Government. For body worn operation, this device has been tested andmeets the FCC RF exposure guideline for use with a Motorola Solutions, Inc. approvedaccessories sold with this device.Use of non-Motorola-approved body worn or battery accessories may exceed the applicable RFexposure guidelines (iEEE, ICNIRP or FCC).Service InformationIf you have a problem with your device, you can contact Motorola Solutions Global Customer SupportCenter for your region.Contact information is available at: http://www.motorolasolutions.com/support. You can also call1-800-323-9949 for support and select option 6 for PS LTE infrastructure and devices. Whencontacting support, have the following information available:•Serial number of the unit (found on manufacturing label)• Model number or product name (found on manufacturing label)• Software type and version numberIf returning the device to Motorola Solutions for repair service, please ensure the following items havebeen completed prior to shipping the device:• Perform complete backup of device, including personal data and contact information• Remove SIM card(s) from device• If applicable, remove SD memory card from device• If applicable, remove CRYPTR micro SD card from deviceMN005019A01-BAbout This Manual20
• Erase/wipe all personal and/or confidential data from devicePlease return the damaged device, only. Accessories, such as the battery, battery cover, chargingcable, holster, etc., should NOT be included with the device when it is returned.Regulatory InformationLEX L11 regulatory labels are located at Settings → About phone → Regulatory labels.NOTICE: If you cannot access regulatory labels in Settings, you can locate physical regulatorylabels in the LEX L11 battery compartment.Federal Communication Commission Interference StatementThis device complies with part 15 of the FCC Rules and Industry Canada license exempt RSSstandard(s). Operation is subject to the following three conditions: (1) This device may not causeharmful interference, and (2) this device must accept any interference received, including interferencethat may cause undesired operation. (3) Any changes or modifications not expressly approved byMotorola Solutions may void the user's authority to operate this device.This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules and complies with Canadian ICES-003. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one of the followingmeasures:•Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.• Consult the dealer or an experienced radio/TV technician for help.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.For Canada: Operations in the 5.15-5.25GHz band are restricted to indoor usage only.This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.Wireless Device Country ApprovalsRegulatory markings, subject to certification, are applied to the device signifying that the radio(s) is/are approved for use in the US. Operation of the device without regulatory approval is illegal.FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES)NOTICE: The country code selection is for non-US model only and is not available to all USmodel. Per FCC regulation, all WiFi product marketed in US must fixed to US operationchannels only.MN005019A01-BAbout This Manual 21
Industry Canada WLAN statementCAUTION:(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce thepotential for harmful interference to co-channel mobile satellite systems;(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;(iii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be suchthat the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation maskrequirement set forth in Section 6.2.2(3) shall be clearly indicated.(v) Users should also be advised that high-power radars are allocated as primary users (i.e.priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars couldcause interference and/or damage to LE-LAN devices.Use with Hearing AidsThis phone has been tested and rated for use with hearing aids for some of the wireless technologiesthat it uses. However, there may be some newer wireless technologies used in this phone that havenot been tested yet for use with hearing aids. It is important to try the different features of this phonethoroughly and in different locations, using your hearing aid or cochlear implant, to determine if youhear any interfering noise. Consult your service provider or the manufacturer of this phone forinformation on hearing aid compatibility. If you have questions about return or exchange policies,consult your service provider or the manufacturer of this phone.To determine the compatibility of a WD and a particular hearing aid, simply add the numerical part ofthe hearing aid category (e.g. M2/T2=2) with the numerical part of the WD emission rating (e.g., M3=3)to arrive at the system classification for this particular combination of WD and hearing aid. A sum of 5would indicate that the WD and hearing aid would provide normal use, and a sum of 6 or greater wouldindicate that the WD and hearing aid would provide excellent performance. A category sum of lessthan 4 would likely result in a performance that is judged unacceptable by the hearing aid user.WHAT IS HEARING AID COMPATIBILITY?The Federal Communications Commission has implemented rules and a rating system designed toenable people who wear hearing aids to more effectively use these wireless telecommunicationsdevices. The standard for compatibility of digital wireless phones with hearing aids is set forth inAmerican National Standard Institute (ANSI) standard C63.19. There are two sets of ANSI standardswith ratings from one to four (four being the best rating): an “M” rating for reduced interference makingit easier to hear conversations on the phone when using the hearing aid microphone, and a “T” ratingthat enables the phone to be used with hearing aids operating in the telecoil mode thus reducingunwanted background noise.HOW WILL I KNOW WHICH WIRELESS PHONES ARE HEARING AID COMPATIBLE?The Hearing Aid Compatibility rating is displayed on the wireless phone box.A phone is considered Hearing Aid Compatible for acoustic coupling (microphone mode) if it has an“M3” or “M4” rating. A digital wireless phone is considered Hearing Aid Compatible for inductivecoupling (telecoil mode) if it has a “T3” or “T4” rating.The tested M-Rating and T-Rating for this device (FCC/IC ID: AZ489FT7104/109U-89FT7104) are M4and T3.HOW WILL I KNOW IF MY HEARING AID WILL WORK WITH A PARTICULAR DIGITAL WIRELESSPHONE?You’ll want to try a number of wireless phones so that you can decide which works the best with yourhearing aids. You may also want to talk with your hearing aid professional about the extent to whichMN005019A01-BAbout This Manual22
your hearing aids are immune to interference, if they have wireless phone shielding, and whether yourhearing aid has a HAC rating.VersionsThis guide covers various software configurations and references made to operating system orsoftware versions.For the operating system version, software build number, and the kernel version you can go toSettings → About phone → Phone status.Notational ConventionsThe following conventions are used in this document:Italics are used to highlight the following:• Icons on a screen• Chapters and sections in this and related documentsBold text is used to highlight the following:• Dialog box, window, and screen names• Drop-down list and list box names• Check box and radio button names• Key names on a keypad• Button names on a screenBullets (•) indicate:• Action items• Lists of alternatives• Lists of required steps that are not necessarily sequentialSequential lists (for example, those that describe step-by-step procedures) appear as numbered lists.Icon ConventionsThe documentation set is designed to give the reader more visual clues.The following graphic icons are used throughout the documentation set. These icons and theirassociated meanings are described here.WARNING: The word WARNING with the associated safety icon implies information that, ifdisregarded, could result in death or serious injury, or serious product damage.CAUTION: The word CAUTION with the associated safety icon implies information that, ifdisregarded, may result in minor or moderate injury, or serious product damage.NOTICE: NOTICE contains information more important than the surrounding text, such asexceptions or preconditions. They also refer the reader elsewhere for additional information,remind the reader how to complete an action (when it is not part of the current procedure, forinstance), or tell the reader where something is located on the screen. There is no warning levelassociated with a note.MN005019A01-BAbout This Manual 23
Chapter 1Getting StartedIn this chapter, you can learn about the features of the LEX L11 device, and how to set up the devicebefore the first power up.1.1Device OverviewThis topic provides an overview of the LEX L11 device.Figure 1: LEX L11 Overview1 2345678912101311Table 3: LEX L11 Back and FrontNumber Item1 Front camera2 Earpiece speaker3 Front microphone #14 Audio Jack5 SIM card tray6 Display7 Loudspeaker8 USB portMN005019A01-BChapter 1: Getting Started24
Number Item9 Front microphone #210 Rear camera and flash11 Fingerprint sensor12 Battery cover13 Rear microphoneFigure 2: LEX L11 Top132Table 4: LEX L11 TopNumber Item Description1 Emergency button Upon a long press, the Emergency button initiates Public SafetyEmergency operation when the Public Safety applications areinstalled.NOTICE: For more information on the PSX CockpitEmergency button, see PSX User Guide.2 Talkgroup rocker The talkgroup rocker changes talkgroups when used with a Mo-torola Solutions application that supports it.3 LED LED light is a notification light that serves to communicate infor-mation even when the LEX screen is off. For more informationon LED notifications, see Battery Charge Indicators on page31.MN005019A01-BChapter 1: Getting Started 25
Figure 3: LEX L11 Side Buttons Overview14523Table 5: LEX L11 Side ButtonsNumber Button Function1 Power button A long press of the Power button turns on the device. When thedevice is on, a long press of the power button displays the Powerbutton menu. A short press toggles the display on and off.2 PTT button When continuously pressed, enables transmission of Push-to-Talk(PTT) calls in all device modes: active, locked, and/or suspended,when used with a PTT application designed to support it.3 Volume Up and VolumeDown buttonsControls the audio volume.4 Programmable Button 1 A short press or a long press of each of the buttons can generateevents. Programmable buttons are pre-programmed with defaultsettings, which can generate events even before provisioning.5 Programmable Button 21.2Package ContentsThe LEX L11 package contains the following items:• The LEX L11 device• Standard battery/high capacity battery with the appropriate battery cover• USB-A to USB-C data/power cable• Region-specific wall charger•LEX L11 Mission-Critical LTE Device Quick Start Guide•RF Energy Exposure Training and Product Safety Information for Mission Critical DevicesMN005019A01-BChapter 1: Getting Started26
1.3Setting Up the DeviceProcess:1Remove the screen protection film from the device.2Install the SIM card(s). See Inserting SIM Cards on page 27.3Optional: Install the microSD or CRYPTR card. See Installing a MicroSD Card on page 28.4Install the battery. See Installing the Battery on page 29.5Attach the battery cover. See Attaching Battery Cover on page 30.6Charge the device. See Charging Information on page 30.1.3.1Dual SIM FunctionalityYour LEX device can operate in two different networks.The dual SIM functionality allows you to use two SIM cards in your LEX device. Each SIM card isissued by a different carrier or provider.Whenever you want to switch between the two networks, you can go to Settings → SIM cards, andselect a radio button next to the SIM slot of your choice.NOTICE: When only a single SIM card is present in the SIM card tray, that SIM card isautomatically chosen.1.3.2Inserting SIM CardsYou can insert one or two Nano SIM cards into the SIM tray.Procedure:1By using your fingernail, pull out the Nano SIM card side tray.The Nano SIM card side tray is located on the side of the LEX L11 device, under the audio port.2With the phone display facing down, insert the Nano SIM card in the SIM card tray.Figure 4: LEX L11 SIM Card Tray3Push the SIM card into the tray until it is fully seated and flat.4Insert the Nano SIM card tray back into the device.MN005019A01-BChapter 1: Getting Started 27
1.3.2.1Removing SIM CardsYou can follow these steps to remove the Nano SIM cards from the Nano SIM card holder.Procedure:1By using your fingernail, pull out the Nano SIM card side tray.The Nano SIM card side tray is located on the side of the LEX L11 device, under the audio port.2Remove the Nano SIM card from the SIM card tray.3Insert the Nano SIM card tray back into the device.1.3.3Installing a MicroSD CardYou can follow this procedure to install a microSD card (for example, a memory card, or a CRYPTRmicro encryption card) in your device.The following figure describes how to insert a microSD card in your LEX device:Figure 5: MicroSD Card InsertionProcedure:1Press and hold the Power button.2Tap Power Off. Tap OK.3Remove the battery cover. See Removing the Battery Cover on page 30.4Remove the battery. See Removing the Battery on page 29.5Remove the microSD card plug by using your fingernail.6If a dummy microSD card is inserted in the microSD plug, remove it and replace it with yourmicroSD card.7Insert the microSD card by performing the following actions:aInsert the microSD card into the microSD plug (1).The angle of insertion should be 45 degrees. The rib of the microSD card must be at thebottom for insertion.bPush the microSD card down and ensure that it is fully seated (2).cWhen the microSD card is fully seated and flat (3), slide the card with the plug into the cardholder slot with contacts facing up.8Push the card into the slot until it is fully seated and locked into place.MN005019A01-BChapter 1: Getting Started28
9Insert the battery. See Installing the Battery on page 29.10 Place the battery cover on the back of the device.1.3.3.1Removing a MicroSD CardProcedure:1Press and hold the Power button.2Tap Power Off. Tap OK.3Remove the battery cover. See Removing the Battery Cover on page 30.4Remove the battery. See Removing the Battery on page 29.5Remove the microSD card plug by using your nail.6Remove the microSD card from the card plug.7Reattach the card plug to the card holder slot.8Insert the battery. See Installing the Battery on page 29.9Place the battery cover on the back of the device. See Attaching Battery Cover on page 30.1.3.4Installing the BatteryCAUTION: If the device has been submerged, and the battery has been removed, you mustallow the battery compartment to dry completely before re-inserting the battery. Failure to do sowill result in damage to the device.Procedure:1If you are performing initial setup of the device, remove the battery from the packaging.2If the battery cover is on, gently remove it from the device. See Removing the Battery Cover onpage 30.3Make sure the slider on the back of the device is on the unlock position (away from the battery).4Insert the battery into the battery compartment, first attaching the top of the battery, where theconnector is located.5Press the top of the battery in place.6Lock the slider by shifting it up.7Attach the battery cover. See Attaching Battery Cover on page 30.1.3.4.1Removing the BatteryProcedure:1Gently remove the battery cover. See Removing the Battery Cover on page 30.2Make sure the slider on the back of the device is on the unlock position (away from the battery).3With the tips of your thumb and index finger, remove the battery by lifting the tab at the bottom ofthe battery.4Place the battery cover on the back of the device. See Attaching Battery Cover on page 30.MN005019A01-BChapter 1: Getting Started 29
1.3.5Attaching Battery CoverProcedure:1Place the battery cover on the back of the device.2Ensure that all battery cover snaps are fully engaged.1.3.5.1Removing the Battery CoverProcedure:1Hold the device firmly.2Using the battery cover removal slot, gently lift the battery cover up and away.Figure 6: Battery Cover Removal SlotThe battery cover removal slot is marked as 1.11.3.6Charging InformationBefore using the LEX L11 for the first time, you must charge the battery by using the provided USBCharger and USB Cable or connect the USB Cable to the USB port of a personal computer.NOTICE: For detailed description, installation, and operation procedures for the LEX deviceaccessories, refer to the quick start guides provided with each accessory.The LEX device typically charges the standard battery up to 90% in about 1.5h in room temperature.NOTICE: Charge times vary by ambient temperature. You can achieve better charging time byusing the quick charger.MN005019A01-BChapter 1: Getting Started30
Batteries can be charged in temperatures from 0°C to 45°C (32°F to 113°F). Note that charging isintelligently controlled by the LEX L11. To accomplish this, for short periods of time, the LEX L11alternately enables and disables battery charging to keep the battery at acceptable temperatures. TheLEX L11 LED indicates when charging is disabled due to abnormal temperatures by fast blinkingamber (once every two seconds).1.3.6.1Battery Charge IndicatorsThe Charge and Notification LED at the top front of the LEX device indicates the battery charging andpower level.Battery charging and power level are indicated also by a battery icon on the status bar.NOTICE: Before checking the battery charge level, remove the device from any power source(cradle or USB cable connection).For the location of the charge and notification LED on the LEX L11 device, see Device Overview onpage 24.Table 6: LEX L11 Notification LEDsState IndicationsOff The battery is not charging. This can indicatethat:• The device is not inserted correctly in thecradle.• The device is not connected to a USB cable.• The charger or cradle is not powered.Blinking blue New notifications:New Voice MailNew notification (for example, Android AppNotification)New SMS or MMSNew EmailMissed CallSolid green The battery is fully charged.NOTICE: This only applies when thedevice is connected to USB, Dual-Unit Charger (DUC), or Multi-UnitCharger (MUC).Slowly blinking red Low battery notification (10% or less).Solid red The battery is charging.Fast blinking red Charging errors:•Too high or too low battery charging temper-ature• Invalid batteryWhen the battery power falls below a predetermined level, the icon indicates the state, and a batterydialog box appears indicating the status of the battery. The message displays until you tap Dismiss.MN005019A01-BChapter 1: Getting Started 31
To monitor battery usage, from the Home screen, tap All Apps → Settings → Battery.1.3.6.2Turning On Battery Saving ModeYou can follow these steps to enter the battery saving mode.When the battery saver is turned on, some device features become unavailable, such as WLANconnectivity, mobile data, Bluetooth, GPS, NFC, and hotspot. Vibration and most background data islimited. Screen brightness in battery saving mode is reduced. Applications that rely on syncing may notupdate unless you open them.NOTICE: The battery saving mode turns off automatically when your device is charging.Procedure:1Swipe the home screen up from the arrow sign and tap Settings.2In Settings, tap Battery.3Select Battery saver and tap the slider next to Off.4Tap Turn on automatically and, from the list of options, select when you want your device toautomatically enter the battery saving mode.You can select one of the following options:Neverat 5% batteryat 15% battery5Select the option of your choice by tapping it.1.4Powering On the Device for the First TimeThe first time you turn on your device, you are guided through a setup process.NOTICE: Some of the settings selected in this procedure can be changed later in AndroidSettings, if needed.Procedure:1Turn on the device by long-pressing the Power button.The device boots up.2Select Exit to Google Setup Wizard and, in the Continue with Google Setup wizard prompt,tap Continue.The Welcome screen appears.MN005019A01-BChapter 1: Getting Started32
Figure 7: LEX L11 Welcome Screen3Choose the language in which you want your device to operate by selecting a language from theEnglish drop-down list.4Tap Let's Go.5On the Get Connected page, connect to a Wi-Fi network available in your area.aTap a network name of your choice.bEnter the password.cTap Connect.6On the Set up email page, set up your email account by selecting one of the options available.If you have a Gmail account, you can use the same e-mail address and password to sign in.After you sign in, all your e-mail, contacts, calendar events, and other data associated with thataccount are synced to your device.If you do not have a Google account, you can create one during the setup process, or connectyour device by using your e-mail account in another domain.7On the Protect your phone page, select the screen lock you want to use, and follow the on-screen instructions.8On the next screen, select options of your choice and tap Next.9On the Anything else? screen, when finished, tap All set.If you have more than one Google account, you can add them later.Postrequisites: If you want a keyboard that matches the language selected for your LEX L11, searchon “keyboard” and that language in the Google Play Store, then install the keyboard that yourorganization recommends.MN005019A01-BChapter 1: Getting Started 33
1.5Powering OnProcedure:Press and hold the Power button.The device boots up.1.6Powering OffProcedure:1Press and hold the Power button.The Power button menu displays.2Tap Power off.1.7Battery ManagementThis section explains how to check the status of your battery and what you can do to make your batterylast longer.NOTICE: Before checking the battery charge level, remove the device from any AC powersource (cradle or cable).To check the charge status of the main battery, from the Home screen, you can swipe the screen upfrom the arrow sign, and tap → About Phone → Status.Battery status indicates that the battery is discharging, and Battery level lists the battery charge (as apercentage of fully charged).1.7.1Battery Usage MonitorThe Battery screen lists applications and allows you to check how much energy they consume. Youcan turn off applications that consume too much energy.You can access the battery usage monitor by swiping the home screen up from the arrow sign, andtapping → Battery.MN005019A01-BChapter 1: Getting Started34
Figure 8: Battery ScreenThe Battery screen lists the applications using the battery. The discharge graph at the top of thescreen shows the rate of the battery discharge since last charged, and how long it has been running onbattery power.You can tap an application in the Battery screen to display details about its power consumption.Different applications display different information. Some applications include buttons that openscreens with settings to adjust power use.1.7.2Low Battery NotificationWhen the battery charge level drops below 15%, you should charge the battery by using one of thecharging accessories.When the battery charge drops below 15%, the device displays a notice to connect the device topower, and the red LED slowly blinks.When the battery charge drops below 1%, the device turns off.You must charge the device by using one of the charging accessories to maintain power.1.7.3Battery OptimizationYou can observe the following battery saving tips:•You can leave the device inside a cradle connected to AC power at all times when not in use.• You can turn off Bluetooth and/or Wi-Fi if not needed.• You can change screen time-out to be as short as possible.• You can charge the device when not in use.• You can set the screen to Suspend (Sleep) after a short period of non-use.• You can reduce screen brightness.• You can minimize use of applications that keep the device from suspending, for example, music orvideo applications.• You can turn Battery Saver on.MN005019A01-BChapter 1: Getting Started 35
1.7.3.1Entering Airplane ModeThe Airplane Mode disables radio-frequency signal transmission by the LEX device. When enabled,the device cannot establish any Bluetooth, GPS, telephone, or Wi-Fi connections.NOTICE: While in airplane mode, you can turn Bluetooth and/or Wi-Fi on. See EnablingBluetooth on page 58 and Connecting to Wi-Fi Networks on page 60.Procedure:1Press the Power button until the Power Button menu appears.2Go offline by tapping Airplane mode.The airplane icon appears in the Status bar indicating that all radios are off.MN005019A01-BChapter 1: Getting Started36
Chapter 2Basic FunctionsBasic functions of the LEX L11 device include touchscreen navigation, entering text by using the on-screen keyboard, managing notifications, and others.2.1Home ScreenFigure 9: LEX L11 Home Screen Overview123546Table 7: LEX L11 Home ScreenItem number Description1Status Bar—Displays status and notificationicons.2Widget—An application extension that is part ofan application installed on your device.3Application Folder—You can group severalfiles into folders.4Application Icon5Arrow Sign—You can swipe up from the arrowsign to open the Apps screen.MN005019A01-BBasic Functions 37
Item number Description6Application Shortcuts—Allow you to accessyour favorite applications quickly.Table 8: On-Screen Navigation ButtonsItem DescriptionBack button—allows you to exit application win-dows.Home button—you can tap it to return to thehome screen.Overview button—allows you to view a list ofapplications that are currently open on yourLEX device. You can manage the applicationwindows. See Switching to Multiple Active Win-dows View on page 41.2.2Touchscreen NavigationThe LEX device is equipped with a multi-touch screen.Table 9: Touchscreen ActionsAction ResultTap You can tap to:•Select items on the screen• Type letters and symbols using the on-screen keyboard• Press on-screen buttonsTap and Hold You can tap and hold:• An item on the Home screen to move it to anew location (by dragging it) or to remove• An item in Apps to create a shortcut on theHome screen• An empty area on the Home screen until themenu appears• An application to perform application actionsDrag You can tap and hold an item for a moment andthen move your finger on the screen until youreach the new position for that item.Swipe You can move your finger up, down, left, or righton the screen to:• Unlock the screen• View additional Home screensMN005019A01-BChapter 2: Basic Functions38
Action Result• View additional application icons in theLauncher window•View more information on an applicationscreenDouble-tap You can tap twice on a webpage, map, or otherscreen to zoom in and out.Pinch In some applications, you can zoom in and outby placing two fingers on the screen and pinch-ing them together (to zoom out) or spreadingthem apart (to zoom in).2.3On-Screen KeyboardThe on-screen keyboard is used to enter text in a text field.Text EditingYou can edit entered text and use menu commands to cut, copy, and paste text within or acrossapplications. Some applications do not support editing some or all of the text they display; others mayoffer their own way to select text.Numbers, Symbols, and Special CharactersTo enter numbers and symbols:•Without switching to the Numbers or Symbols keyboard, it is possible to tap and hold one of thetop-row keys until a menu appears and then select a number.• By tapping the arrow key, you can enter a capital letter.• When you tap and hold the arrow key until it becomes underlined, you can enter two or more capitalletters. By tapping the arrow key again, you can return to the lowercase keyboard.• By tapping the ?123 key, you can switch to the numbers and symbols keyboard.• By tapping the key, you can view additional symbols.•By tapping and holding a key, you can open a menu with additional characters available under thatkey.2.3.1Google Keyboard SettingsThe Google Keyboard Settings may be personalized to meet your preferences.Table 10: Google Keyboard SettingsGoogle keyboard settings are located at Settings → Languages & Input → Virtual keyboard →Gboard.Setting DescriptionLanguages You can select the language to be used in thekeyboard.MN005019A01-BChapter 2: Basic Functions 39
Setting DescriptionPreferences Allows you to adjust settings such as one-hand-ed mode, sound on keypress, vibrate on key-press, and others.Theme Allows you to select the keyboard theme: youcan choose from one of your images, or fromother themes available on the device.Text correction You can choose from text correction options,such as show suggestion strip, block offensivewords, suggest contact names, auto-correction,and others.Glide Typing These settings allow you to enter a word bysliding through the letters on the keyboard.Voice Typing You can adjust voice typing settings, such asthe language to be spoken.Dictionary You can choose to sync learned words, or todelete learned words from your personal dic-tionary.Search You can choose to use predictive search, or toshow the Search and more button in the sug-gestion strip for faster access to Search.Advanced These settings allow you to display applicationicons in the launcher, or to have a physical ALTkey show the emoji keyboard. You an also de-cide to improve Gboard statistics.2.3.2Google Voice TypingYou can enter text by speaking.Procedure:1On the Google keyboard, tap .2Start speaking your text.3When finished, tap .2.3.2.1Adjusting Google Voice Typing SettingsProcedure:1On the home screen, swipe up from the arrow sign and tap Settings.2Select Languages & Input → Virtual keyboard → Google voice typing.3Configure the settings of your choice.MN005019A01-BChapter 2: Basic Functions40
2.4Status Bar IconsStatus icons give you status information on actions occurring on your LEX device.Table 11: Status Bar IconsFor the location of the Status Bar, see Home Screen on page 37.Icon DescriptionIndicates the battery is fully charged.Indicates the battery level is low (20% or less).Indicates the battery is charging.Indicates the alarm is active.Indicates the Bluetooth service is on.Indicates that the device is connected to a Wi-Finetwork.Indicates that there is no Wi-Fi signal.Indicates all sounds except media and alarmsare silenced and vibrate mode is active.Indicates the Airplane Mode is active.Indicates that location services are on.Indicates that a file was downloaded to the de-vice.Indicates that a file was sent from the device.Indicates that do not disturb is on.Indicates mobile network signal strength.Indicates no SIM card is present.Indicates howling suppression is on.2.5Switching to Multiple Active Windows ViewThe LEX device supports multi-window view, which allows for dragging and dropping data between thepanes.You can view two applications side-by-side on your device screen. This feature works in both portraitand landscape mode.MN005019A01-BChapter 2: Basic Functions 41
NOTICE: Some applications may not support this functionality.Procedure:1Start the applications that you want to use simultaneously.2Long press the square Overview button located at the bottom of the device screen.The screen splits in two. One half of it displays the most recently opened application, and theother one displays a list of the rest of the recently opened applications.3Select an application by sliding your finger on the list of applications and tapping an applicationof your choice.2.6Accessing Files from a ComputerProcedure:1Connect the device to your computer using a USB type C cable.2Open the Notifications panel by swiping the screen down from the Status bar.Figure 10: Notifications Panel3Tap the USB for... notification.4In the Use USB to screen, select one of the following:•If you want to transfer files to Windows or Mac (MTP), select File transfers.• If you want to access photos or other files on a computer that does not support MTP, selectPhoto transfer (PTP).• If you want to use LEX for MIDI input, select MIDI.MN005019A01-BChapter 2: Basic Functions42
Chapter 3Device SettingsThis chapter describes ways to personalize your LEX L11 device by changing the default devicesettings.NOTICE: If you cannot access features described in this section, contact your device technicianfor more information.3.1Covert ModeIn the Covert Mode, the device goes dark and quiet. All visible and audible alerts and notifications areshut down. This feature makes the LEX device effectively unnoticeable even in a silent and darkenvironment.In Covert Mode, the following sounds, visual indications, and keys are disabled:•Display backlight• Touchscreen• Keylight• LED indications• Vibration and haptics - optional• Speaker audioNOTICE: In Covert Mode, sound is routed to a Bluetooth headset, if connected or sound isrouted to a wired earpiece, if connected. Alternatively, sound is routed to the earpiece.In Covert Mode, the following features remain active:•Power button•PTT button•Emergency button•Talkgroup Rocker button•Programmable buttons•Volume button•Audio indications are available using a wired headset (through headset port) or a Bluetoothheadset.When the LEX device is in covert mode, after a long press of the power key, the device illuminates thedisplay backlight at low intensity to display the Power button menu where you can exit covert mode.3.1.1Turning On Covert ModeProcedure:1Press and hold the Power button for at least two seconds.The Power Button menu appears.MN005019A01-BDevice Settings 43
2Tap Covert mode.The screen goes blank.3.1.2Turning Off Covert ModeProcedure:1Press and hold the Power button for at least two seconds.The Power Button menu appears.2Tap Covert mode.All audible and visual settings, such as loudspeaker volume, display brightness, and vibration,return to the same settings and levels as they were before the device entered the Covert Mode.3.1.3Configuring Covert ModeProcedure:1In Settings, select Languages & input.2Tap Covert Mode settings.3Adjust the slidebars next to the options of your choice.3.2Setting Programmable ButtonsYou can set the LEX L11 programmable buttons to perform various actions.Each button can have two functions: one for short press, and one for long press.For the exact location of the programmable buttons on the LEX L11 device, see Device Overview onpage 24.NOTICE: Programmable buttons are pre-programmed with default settings, which can generateevents even before provisioning.Procedure:1From the main menu, pull down the Notification bar.2Tap Settings → Languages and Input → Programmable buttons.3In the Programmable Buttons window, select one of the following options:•Programmable button -1- short press•Programmable button -1- long press•Programmable button -2- short press•Programmable button -2- long press4From the list of available applications/settings, select one application/setting by tapping the radiobutton next to it.The list of available options is as follows:•Covert mode ON/OFF toggle - default for long press on top programmable button• HomeMN005019A01-BChapter 3: Device Settings44
• Screen brightness up•Screen brightness down• Camera - default for short press on top programmable button• Answer call (when ringing) or end call (when in call) - default for short press on bottomprogrammable button• Ringer/Media Mute/Unmute - default for long press on bottom programmable button• “OK Google” (open in Google App listening for instructions)• No event3.3LEX Series Screen LockYou can cause the LEX device screen to lock automatically by specifying a pattern, PIN, password, ora fingerprint.If you establish a PIN, pattern, password, or a fingerprint as a preferred way to unlock the devicescreen, you can keep your data secured.NOTICE: If the device screen lock option is set to None or Swipe, your data is not secured andcan be accessed by anyone.When the device is on, you can lock your device by pressing the Power button, and unlock byproviding a pattern, PIN, password, or a fingerprint. If you did not specify a pattern, PIN, password, or afingerprint, you can also unlock the LEX device by swiping up the device screen, or only by pressingthe Power button if no locking option was set.When the device is locked and cellular network signal is available, phone calls, notification of newmessages, missed calls and upcoming appointments still can be received.You can also set the device to automatically lock after a specified time. See Setting Timeout forLocking on page 47.3.3.1Selecting a Locking OptionSecurity dictates a specific level of locking for the LEX device screen. You may protect the device bysetting a password, PIN, a pattern, or a fingerprint as a locking option, but you may also decide not toselect any of these options at all (not recommended).NOTICE: Your account may enforce more stringent locking requirements than those listed here.For more information, contact your device administrator.Procedure:1Swipe the home screen up from the arrow sign, and tap .2Select Security → Screen lock.The following options are displayed:•None.•Swipe — You must slide the lock to unlock the device.•Pattern — You must replicate a specified pattern to unlock the device.•PIN — You must enter a PIN to unlock the device.•Password — You must enter a specified password to unlock the device.MN005019A01-BChapter 3: Device Settings 45
3Select an option of your choice by tapping it.If… Then…If you selected PIN, perform the following actions:aIf you want your device to require yourPIN when it starts up, in the Securestart-up window, tap Require PIN tostart device.bIn the Choose your PIN window, enter aPIN code of at least four digits and tapCONTINUE.cConfirm your PIN.dIn the Notifications window, decide howyou want your notifications shown by se-lecting a radio button of your choice andtapping DONE.If you selected Pattern, perform the following actions:aIf you want your device to require yourpattern when it starts up, in the Securestart-up window, tap Require pattern tostart device.bIn the Choose your pattern window,create your pattern that connects at leastfour dots and tap CONTINUE.cConfirm your pattern.dIn the Notifications window, decide howyou want your notifications shown by se-lecting a radio button of your choice andtapping DONE.If you selected Password, perform the following actions:aIf you want your device to require yourpassword when it starts up, in the Se-cure start-up window, tap Requirepassword to start device.bIn the Choose your password window,enter a password of at least four charac-ters and tap CONTINUE.cConfirm your password.dIn the Notifications window, decide howyou want your notifications shown by se-lecting a radio button of your choice andtapping DONE.The device is set to lock.MN005019A01-BChapter 3: Device Settings46
3.3.2Setting Timeout for LockingYou may specify the timeout for device locking. After the set amount of time, the device automaticallylocks.Prerequisites: Ensure that the screen lock is set to pattern, PIN, or password.Procedure:1Swipe the home screen up from the arrow sign.2Select → Security.3Tap next to Screen lock.4Tap Automatically lock.5Select a timeout value from the list.3.3.3Device UnlockWhen the LEX device is not used for a period of time and you try to access the device, the Lockscreen displays.Depending on which Screen lock option is active, you can do one of the following:•Nothing.• Swipe the screen.• Enter a pattern, PIN, or password, or unlock the device by using a fingerprint.3.3.3.1Unlocking the LEX Device Using a PatternProcedure:1Press and release the Power button.2Swipe the screen from the bottom upwards.3By using a finger, draw the specified pattern on the screen.Once the correct pattern is drawn, the device unlocks.3.3.3.2Unlocking the LEX Device Using a PIN or PasswordProcedure:1Press and release the Power button.2Swipe the screen from the bottom upwards.3In the text field, enter your PIN or password.4Tap .The device unlocks and the Home screen is shown.MN005019A01-BChapter 3: Device Settings 47
3.3.3.3Setting Unlock with FingerprintYou can follow this procedure to be able to unlock your device by touching the fingerprint sensor.You can use your fingerprint to unlock applications.NOTICE:A fingerprint may be less secure than a strong PIN, pattern, or password.Your account may enforce more stringent locking requirements than those listed here. For moreinformation, contact your device administrator.Procedure:1Swipe the home screen up from the arrow sign, and tap .2Select Security → Fingerprint.3In the Unlock with fingerprint window, tap NEXT.4In the Unlock selection window, choose your backup screen lock method.The backup method is used when:•You restart the device• The fingerprint sensor does not recognize your fingerprint after a few attempts• You switch to a different user• You did not use your backup method to unlock your device for more than 48 hours.5Depending on the choice you made in step 4, perform one of the following actions:If… Then…If you selected PIN, perform the following actions:aIf you want your device to require yourPIN when it starts up, in the Securestart-up window, tap Require PIN tostart device.bIn the Choose your PIN window, enter aPIN code of at least four digits and tapCONTINUE.cConfirm your PIN.dIn the Notifications window, decide howyou want your notifications shown by se-lecting a radio button of your choice andtapping DONE.If you selected Pattern, perform the following actions:aIf you want your device to require yourpattern when it starts up, in the Securestart-up window, tap Require pattern tostart device.bIn the Choose your pattern window,create your pattern that connects at leastfour dots and tap CONTINUE.MN005019A01-BChapter 3: Device Settings48
If… Then…cConfirm your pattern.dIn the Notifications window, decide howyou want your notifications shown by se-lecting a radio button of your choice andtapping DONE.If you selected Password, perform the following actions:aIf you want your device to require yourpassword when it starts up, in the Se-cure start-up window, tap Requirepassword to start device.bIn the Choose your password window,enter a password of at least four charac-ters and tap CONTINUE.cConfirm your password.dIn the Notifications window, decide howyou want your notifications shown by se-lecting a radio button of your choice andtapping DONE.6Add your fingerprint by following the on-screen instructions.The fingerprint sensor is located on the back of the device. See Device Overview on page 24.7In the Fingerprint added screen, tap DONE.You can add more than one fingerprint.3.3.3.3.1Unlocking the Device by Using the Fingerprint SensorProcedure:Press your finger to the fingerprint sensor on the back of the device.The device screen unlocks.3.3.4Calling Emergency from a Locked LEX DeviceYou can make an emergency call even when the LEX device is locked and you do not remember yourPIN, pattern, or password.Procedure:1Press the Power button.2Tap EMERGENCY at the bottom of the lock screen.The Emergency Dialer screen displays.3Enter the emergency number.4Tap .MN005019A01-BChapter 3: Device Settings 49
3.4Setting Date and TimeWhen the LEX device is connected to cellular network, date and time are automatically synchronized.You can perform this procedure to manually set the date and time on your LEX device.Procedure:1Swipe the home screen up from the arrow sign.2Tap .3Tap Date & time.4Disable automatic date and time synchronization by tapping Automatic date & time.5Disable automatic time zone synchronization by tapping Automatic time zone.6Tap Set date.7Select a month, date and year.8Tap OK.9Tap Set time.10 Select the hour, minutes and part of the day by sliding your finger up and down.11 Tap OK.12 Tap Select time zone.13 Tap to select a time zone from the list.3.5Setting the DisplayThe following LEX device display features can be customized:•Brightness level — Set the brightness of the display.• Adaptive brightness — Optimize brightness level for available light.• Wallpaper — Choose a background type on the home and lock screens.• Sleep — Set the time the device waits before turning off the backlight of the display.• Screen saver — Set the device to launch a screensaver when the device is docked inside a cradleor charging.• Ambient display — Wake screen when you receive notifications.• Font size — Change the font size for display text.• Display size — Change the display size.• When device is rotated — Rotate the contents of the screen.• Cast — Enable the device to project the screen to a TV or other device.3.5.1Setting Screen Brightness LevelProcedure:1In Settings , tap Display → Brightness level.2Set the brightness level by adjusting the Brightness level slidebar.MN005019A01-BChapter 3: Device Settings50
3.5.2Setting Adaptive BrightnessOptimize brightness level for available light.Procedure:From → Display, set the Adaptive brightness slidebar to the ON position.3.5.3Changing WallpapersYou can set an image or a photo stored in your device as your home screen wallpaper.Procedure:1Tap and hold the home screen.2From the context menu, select Wallpapers.3Scroll through the available images and tap a photo or image of your choice.4Tap Set wallpaper.3.5.4Setting Up Sleep ModeUse this procedure to set up sleep mode (screen time-out).Procedure:1From Settings , tap Display → Sleep.2Select one of the sleep values by tapping a value of your choice.3.5.5Setting Up Screen SaverProcedure:1In Settings , select Display → Screen saver.2Select one of the available options by tapping it.You can configure your the options by tapping next to your selection.3Tap , tap When to start screen saver and select when you would like the feature to beactive (While docked, while charging, or either).4Preview and confirm your selection by tapping Start now.3.5.6Setting Font SizeProcedure:1In Display settings, tap Font size.2Slide your finger on the scale to adjust the font size.MN005019A01-BChapter 3: Device Settings 51
3.5.7Setting Display SizeProcedure:1In Display settings, tap Display size.2Adjust the display size by sliding your finger left to right on the scale.3.5.8Setting Screen RotationScreen rotation enables the LEX device to automatically determine the orientation of the screen toportrait or landscape.NOTICE: Some applications may not support screen rotation.Procedure:1In the Display settings, tap When device is rotated.2Select one of the following options:•If you want the screen to rotate, select Rotate the contents of the screen.• If you do not want the screen to rotate, select Stay in portrait view.3.5.9Enabling Cast ScreenWhen and where to use: You can use this procedure to enable the LEX device to project the screento a TV or other device.Procedure:1In the Display settings, tap Cast.2Tap .3Select Enable wireless display.3.6Sound SettingsSound settings allow you to configure default media, alarm, and ring volume levels and ringtones.3.6.1Adjusting Sound SettingsSound settings allow you to adjust media, alarm, and ring volume.Procedure:1Tap → Sound & notification.2Adjust the slidebars for media, alarm, and ring volume.3If you want your device to vibrate for calls, adjust the slidebar for Also vibrate for calls.MN005019A01-BChapter 3: Device Settings52
3.6.2Enabling Howling SuppressionYou can enable a microphone and loudspeaker sound profile that suppresses feedback loop andscreeching or howling noise in a half-duplex call when sending and receiving phones are close to eachother.Procedure:Enable howling suppression by performing one of the following actions:If… Then…If you want to enable howling suppres-sion from the Settings menu,perform the following actions:aFrom the main menu, tap Settings →Sound.bSlide the Howling Suppression toggleto ON.If you want to enable howling suppres-sion from the Quick Settings panel,perform the following actions:aPull down the Quick Settings panel.bTap .3.6.2.1Disabling Howling SuppressionYou can perform this procedure to disable the howling suppression feature.Procedure:1From the main menu, tap Settings → Sound.2Disable howling suppression by performing one of the following actions:If… Then…If you want to disable howling suppres-sion from the Settings menu,perform the following actions:aFrom the main menu, tap Settings →Sound.bSlide the Howling Suppression toggleto OFF.If you want to disable howling suppres-sion from the Notifications panel,perform the following actions:aPull down the Notifications panel.bTap .MN005019A01-BChapter 3: Device Settings 53
3.6.3Setting Up Do Not DisturbThe Do not disturb setting allows you to mute alarms, reminders, events, messages, and calls.You can set a schedule so that Do not disturb is turned on and off automatically. You can setexceptions on chosen elements.Procedure:1Tap → Sound → Do not disturb → Priority only allows.2Set exceptions by following these steps:aIf you want to unmute Reminders, adjust the Reminders slidebar.bIf you want to unmute Events, adjust the Events slidebar.cIf you want to set exception on Messages, select Messages and choose from the list ofavailable options.dIf you want to set exception on Calls, tap Calls and choose from the list of available options.eIf you want to repeat callers, adjust the Repeat callers slidebar.3.6.3.1Setting Automatic RulesAutomatic rules allow you to set a schedule when Do not disturb turns on and off automatically.Procedure:1Tap → Sound → Do not disturb → Automatic rules.2Choose from the following automatic rules:If… Then…If you want to set automatic rules forweekends,perform the following actions:aSelect Weekend and adjust the slidebarto the On position.bSet the following:• Rule name• Days• Start time• End time• Do not disturb• Alarm can override end timeIf you want to set automatic rules forweeknights,perform the following actions:aSelect Weeknights and adjust the slide-bar to the On position.bSet the following:• Rule nameMN005019A01-BChapter 3: Device Settings54
If… Then…• Days•Start time• End time• Do not disturb• Alarm can override end timeIf you want to set automatic rules forevents,perform the following actions:aSelect Event and adjust the slidebar tothe On position.bSet the following:• Rule name• During events for• Where reply is• Do not disturbIf you want to add a new rule, perform the following actions:aSelect Add rule.bEnter the rule name and set it to timerule or event rule.cSet the following:• Rule name• Days• Start time• End time• Do not disturb• Alarm can override end time3.6.4Enabling Hearing Aid CompatibilityYou can follow this procedure to enable hearing aid compatibility on your LEX L11 device.The Federal Communications Commission (FCC) has adopted hearing-aid compatibility (HAC)requirements for digital wireless phones. By using a hearing aid with a hearing aid compatible LEXL11, you can improve your ability to hear on the phone.WARNING: When the hearing aid compatibility is enabled, the handset mode volume level ofvoice calls may be increased above safe levels. Listening at a high volume for a long time maydamage your hearing.Procedure:1Swipe the home screen up from the arrow sign.2Tap .3Select Sound.4Tap Other sounds.MN005019A01-BChapter 3: Device Settings 55
5Enable hearing aid compatibility by setting the Hearing aid compatibility toggle to the ONposition.3.6.4.1Disabling Hearing Aid CompatibilityProcedure:1Swipe the home screen up from the arrow sign.2Tap .3Select Sound.4Tap Other sounds.5Disable hearing aid compatibility by setting the Hearing aid compatibility toggle to the OFFposition.MN005019A01-BChapter 3: Device Settings56
Chapter 4WirelessThis section provides information on the wireless features of the LEX L11 device.4.1Bluetooth ProfilesThe LEX device supports a wide range of Bluetooth services.Table 12: Bluetooth ProfilesBluetooth Profile DescriptionAdvanced Audio Distribution Profile (A2DPSRC)Allows the device to stream stereo-quality audioto a wireless headset or wireless stereo speak-ers.Handsfree Profile (HFP AG) Provides the capability for carkits and Bluetoothheadset to be used for phone calls and controlthem (initiate, answer, terminate, and other).Headset Profile (HSP AG) Provides support for the popular Bluetoothheadsets to be used with mobile phones withability to ring, answer a call, hang up, and ad-just the volume.Human Interface Device Profile (HID Host) Allows Bluetooth keyboards, pointing devices,gaming devices, and remote monitoring devicesto connect to the device.Serial Port Profile (SPP Dev A, Dev B) Sets up a virtual serial port and connects twoBluetooth-enabled devices. For example, con-necting the device to a printer.Generic Access Profile (GAP) This profile defines how Bluetooth-enabled de-vices can make themselves available and howtwo devices can communicate directly with eachother.Service Discovery Application Profile (SDAP) Describes how an application should use SDPto discover services on a remote device.Dial-up Networking (DUN GW) Profile Allows the device to share Internet connectionwith another device.Generic Object Exchange Profile (GOEP) Provides a basis for other data profiles.Object Push Profile (OPP Client/Server) Allows the device to push and pull objects toand from a push server.Generic Audio/Video Distribution Profile(GAVDP)Provides the basis for A2DP and VDP. This pro-file defines two roles: initiator (INT) and accept-or (ACP).Message Access Profile (MAP MSE) Allows exchange of messages between devi-ces.MN005019A01-BWireless 57
Bluetooth Profile DescriptionAudio/Video Remote Control Profile (AVRCPTG)Allows remote devices to control audio playbackon local device (for example: play, pause, stop,adjust volume).Phone Book Access Profile (PBAP PSE) Allows exchange of Phone Book Objects be-tween a car kit and a mobile phone to allow thecar kit to display the name of the incoming call-er; allow the car kit to download the phone bookso the user can initiate a call from the car dis-play.File Transfer Profile (FTP Server) Provides the capability to expose local file sys-tem to remote devices which can manipulateand transfer files.Personal Area Networking (PAN NAP/PANU)ProfileAllows the device to share Internet connectionwith another device (for example a laptop) andto access the Internet shared by another device(for example a Bluetooth enabled phone).Proximity Profile (PXP Monitor) Enables proximity monitoring between two devi-ces.Health Device Profile (HDP) Makes transmission and reception of MedicalDevice data possible.SIM Access Profile (SAP) Allows devices with built-in GSM transceivers toconnect to a SIM card in a Bluetooth enabledphone. These devices do not need to have sep-arate SIM cards.Generic Attribute (GATT) and attribute protocol(ATT)Allows profile discovery and description serv-ices for Bluetooth Low Energy protocol.4.2Bluetooth Power StatesThe Bluetooth radio is off by default.The following modes are available:•Suspend — When the device goes into suspend mode, the Bluetooth radio stays on.•Airplane Mode — When the device is placed in Airplane Mode, the Bluetooth radio turns off. WhenAirplane Mode is disabled, the Bluetooth radio returns to the prior state. When in Airplane Mode, theBluetooth radio can be turned back on if desired.4.3Enabling BluetoothBluetooth allows you to send to and receive data from other Bluetooth-enabled devices paired withyour LEX device.Procedure:1On the Settings page, tap Bluetooth.2Switch the Bluetooth slidebar to the On position.MN005019A01-BChapter 4: Wireless58
4.4Disabling BluetoothProcedure:1On the Settings page, tap Bluetooth.2Switch the Bluetooth slidebar to the Off position.4.5Renaming the DeviceBy default, your LEX device has a generic Bluetooth name visible to other devices when connected.Procedure:1In Settings , tap Bluetooth.2If Bluetooth is not on, adjust the Bluetooth slidebar.3Tap and select Rename this device.4Enter a new device name and tap Rename.4.6Pairing LEX with Bluetooth DevicesThe LEX device can receive and send data when paired with other Bluetooth-enabled devices.Prerequisites: Ensure that Bluetooth is enabled on both devices, and that the device you want to pairyour LEX with is in discoverable mode.Procedure:1On the Settings page, tap Bluetooth.2Enable Bluetooth by adjusting the slidebar to the ON position.The device searches for available Bluetooth-enabled devices and lists them.3Scroll through the list and tap a device name.The Pairing request dialog box displays.4Compare the pass keys on both devices and tap Pair on both devices.The device is added to the Paired devices list.4.6.1Managing Bluetooth DevicesYou can manage Bluetooth devices paired with your LEX by renaming the devices, sharing contacts,and more.Procedure:1Tap located next to a paired Bluetooth device.2If you want to rename the device, tap the Name field.MN005019A01-BChapter 4: Wireless 59
3If you want to unpair the device, tap Forget.4If you want to share contacts with the device, tap Contact sharing.Some Bluetooth-enabled accessories/devices allow for more profiles to be used.4.7Connecting to Wi-Fi NetworksWi-Fi is a wireless network technology that provides Internet access at distance up to 100 feet,depending on the Wi-Fi router and surroundings. You can access Internet when you connect your LEXdevice to a Wi-Fi network.Procedure:1Swipe the home screen up from the arrow sign and tap Settings .2Tap WLAN.The device searches for wireless networks in the area and lists them.3Scroll through the list and select the desired network.4Enter the password and tap Connect.You can verify the password before connecting by tapping Show password.Adding New NetworksYou can add a Wi-Fi network that does not broadcast its name (SSID), or is currently out of range.Procedure:1In the WLAN screen, select Add network.2Enter the following details:•Network name: The wireless network SSID•Security: Set the security type to None, WEP, WPA/WPA2 PSK, 802.1x EAP3Tap Show Advanced Options and set the Proxy details and IP settings.4Tap SAVE.Editing NetworksProcedure:1Touch and hold the connected network.2Select Modify Network.3Save the settings by tapping Save.Forgetting NetworksYou can disconnect your device from a remembered wireless network.Procedure:1Touch and hold the connected network.MN005019A01-BChapter 4: Wireless60
2Select Forget Network.The device disconnects from the selected network. You are prompted for the password if you tryto connect to the same network again.4.8Configuring Wi-Fi HotspotsThe LEX device can serve as a portable Wi-Fi hotspot, which allows you to connect 32 other devices tothe wireless Internet provided by the LEX device.In Wi-Fi Access Point mode, the LEX L11 device supports two authentication types:•None• WPA2-PSKPrerequisites: Ensure that your device has Internet connection.Procedure:1From the home screen, swipe the screen up from the arrow sign.2Tap Settings.3In the Wireless and networks section, tap More ....4Tap Tethering & portable hotspot.5Tap Set up WLAN hotspot.The Set up WLAN hotspot screen displays.Figure 11: Set up WLAN Hotspot Dialog Box6In the Network Name text field, edit the network name.7Tap the Security option and select a security method from the drop-down list:•None•WPA2 PSK8In the Password text field, enter a password.NOTICE: If None is selected in the Security field, a password is not required.MN005019A01-BChapter 4: Wireless 61
9Under Select AP Band, tap the 2.4 GHz Band drop-down list, and select one of the followingoptions:•2.4 GHz• 5 GHzWithout the SIM card, only the 2.4 GHz band is supported.10 Tap Save.4.9Setting Up USB TetheringYou can share your mobile Internet connection with a computer or with other devices.Prerequisites: Connect your device to a computer by using a USB cable.Procedure:1On the Settings page, tap More → Tethering & Portable hotspot.2Enable USB tethering.4.10Configuring Bluetooth TetheringYou can use this procedure to tether Bluetooth to share the data connection with a host computer.Prerequisites: Configure the host computer to obtain its network connection using Bluetooth. Formore information, see the host computer documentation.Procedure:1Pair the LEX device with the host computer.See Pairing LEX with Bluetooth Devices on page 59.2Swipe the home screen up from the arrow sign and tap Settings .3Tap More ... .4Tap Tethering & portable hotspot.5Adjust the Bluetooth tethering slidebar.The host computer is now sharing the LEX device data connection.4.11Near-Field CommunicationNear-field communication (NFC) allows you to establish one- and two-way communication betweentwo electronic devices by bringing them close to each other at a distance of max. 2 cm.The following are the examples of how NFC could be used. Some of the examples may require the useof other applications:• LEX L11 can act as a badge for physical access (doors entry)• LEX L11 can be used as a physical token to access protected networks and/or services• NFC tag readingMN005019A01-BChapter 4: Wireless62
NOTICE:The NFC feature is set to OFF by default.You can turn NFC on or off when the device is in Airplane mode.Turning on NFC displays the current setting for Tap and Pay in Android Settings.The practical applications of NFC available to the user may depend on other applications.4.11.1Turning NFC OnYou can perform this procedure to enable near-field communication (NFC) transfers between your LEXL11 device and other devices.Procedure:Pull down the Quick Settings panel, and perform one of the following actions:If… Then…If you want to turn NFC on from theQuick Settings panel,slide the NFC toggle to the ON position.If you want to turn NFC on from the Set-tings page,perform the following actions:aTap Settings .bOn the Settings page, tap Wireless andNetwork → More.cSet the NFC slidebar to the On position.You can start using the NFC feature on your device. You can transfer data to and from other deviceswhen your LEX device touches another device.NOTICE: The maximum distance between the devices is two (2) cm.4.11.2Turning NFC OffYou can perform this procedure to disable the near field communication (NFC) feature on your LEXL11 device.Procedure:Pull down the Quick Settings panel.If… Then…If you want to turn NFC off from theQuick Settings panel,slide the NFC toggle to the OFF position.If you want to turn NFC off from the Set-tings page,perform the following actions:aTap Settings .bOn the Settings page, tap Wireless andNetwork → More.cSet the NFC slidebar to the OFF position.MN005019A01-BChapter 4: Wireless 63
Chapter 5ContactsYou can use the Contacts application to maintain phone numbers and other data.5.1Adding New ContactsYou can add new contacts to the phonebook.Procedure:1On the home screen, tap .2Tap , and enter the contact details.3Add the new contact by tapping SAVE.5.2Editing Contact DetailsYou can edit the details of your contacts.Procedure:1On the home screen, tap .2Tap the contact that you want to modify.3Tap .4Edit the required details, and tap SAVE.5.3Searching ContactsYou can use the search option to quickly find specific contacts from the list.Procedure:1On the home screen, tap .2Tap and perform one of the following actions:•If you want to browse by name, enter the first few letters of the contact name.• If you want to browse by phone number, enter the first few digits of the contact phonenumber.All contacts that contain the text entered in the search field are displayed.MN005019A01-BChapter 5: Contacts64
5.4Sharing ContactsYou can send contact information by MMS, Bluetooth, Drive, and e-mail.Procedure:1Open the Contacts application.2Tap → Select.3Tap the contacts that you want to share.4Tap .5From the list of suggested sharing applications, tap the application of your choice.6Choose when to select the transfer mode by selecting one of the following options:•To select the transfer mode each time, tap Just Once.• To send contacts by using the same method, tap Always.MN005019A01-BChapter 5: Contacts 65
Chapter 6CallingThis chapter describes using the Phone application, for example making calls and conference calls.6.1Making CallsProcedure:1On the Home screen, tap .2Dial a number by performing one of the following actions:If… Then…If you want to make a call by directly en-tering a number,perform the following actions:aTap .bEnter the phone number and tap .If you want to make a call by using SpeedDial,perform the following actions:aTap .bTap and hold the key that corresponds toa contact number that you want to call.If you want to call a recently called num-ber,perform the following actions:aTap .bFrom the list, tap the contact that youwant to call.cTap .If you want to make a call by searchingthe contacts already saved on your de-vice,perform the following actions:aTap .bFrom the list, tap the contact that youwant to call.cWhen the contact displays, tap next to the number.3If you want to adjust audio settings during the call, perform one of the following actions:MN005019A01-BChapter 6: Calling66
If… Then…You want to turn on the speakerphone, tap .You want to mute the call, tap .4End the call by tapping .6.1.1Setting Up Speed DialProcedure:1Open the Phone application.2Tap .3Tap and hold 2.4In the Key unassigned prompt, tap Yes.5In the Speed dial settings window, tap a key to assign a contact to it.6In the prompt, enter the number that you want to assign to the selected key, or tap the Contactsicon next to the field to select a number from a contact list.7When finished, tap OK.6.2Making Conference CallsYou can use this procedure to create a conference call with multiple people.Conference calling (Add Call) is available if you want to talk to more than one user at a time.NOTICE: Conference calling may not be supported by your service provider. Check with yourservice provider technical support for conference calling availability. The total number ofconference call participants may be limited by your service provider. For the maximum numberof participants in a conference call, contact your service provider technical support.Procedure:1On the Home screen, tap .2Dial a number by performing one of the following actions:If… Then…If you want to make a call by directly en-tering a number,perform the following actions:aTap .bEnter the phone number and tap .If you want to make a call by using SpeedDial,perform the following actions:MN005019A01-BChapter 6: Calling 67
If… Then…aTap .bTap and hold the key that corresponds toa contact number that you want to call.If you want to call a recently called num-ber,perform the following actions:aTap .bFrom the list, tap the contact that youwant to call.cTap .If you want to make a call by searchingthe contacts already saved on your de-vice,perform the following actions:aTap .bFrom the list, tap the contact that youwant to call.cWhen the contact displays, tap next to the number.3While in your call, tap .The first person is put on hold.4Dial the second person. See step 2.5Tap to join the two calls together. The device screen states Conference Call andeveryone can talk and hear one another.6Tap to end the call.6.3Answering Calls with a Bluetooth HeadsetYou can follow this procedure to answer calls by using a Bluetooth headset.When you receive a phone call, the Incoming Call screen opens, displaying the caller ID and anyadditional information about the caller that is in the contact application.Prerequisites: Ensure your LEX device is paired with the Bluetooth accessory. See Pairing LEX withBluetooth Devices on page 59.Procedure:1When a call arrives, tap the Call button on the Bluetooth headset to answer the call.2To silence the ringer before answering the call, press the volume down button on the side ofdevice.3To end the call press the Call button on the Bluetooth headset.MN005019A01-BChapter 6: Calling68
All incoming calls are recorded in the Phone ( ) application, in the Recents tab. If youmiss a call, you receive a notification.6.4Call SettingsIn Call settings, you can adjust display options, sounds and vibration, select quick responses, andmany more.NOTICE: Not all options are available for all configurations.Call settings are located at → → Settings.MN005019A01-BChapter 6: Calling 69
Chapter 7MessagingLEX device can be used to send and receive text messages on the service provider network. The LEXdevice uses the Phone application.NOTICE: If your Organization requires a Public Safety Experience (PSX) for text messaging,contact your device technician.The LEX device supports the following types of text messages:Text messagesYou can send and receive simple messages containing text to other mobile phones (also known asSMS).Multimedia messagesYou can send and receive text messages with pictures, video, and/or sound to other mobile phones(also known as MMS).NOTICE: Messaging service availability depends on your network and service plan.7.1Sending MessagesYou can use this procedure to send text and multimedia messages.Procedure:1From Home screen tap .2Tap .3In the To field, type a name, a phone number, or an email address.As you enter text in the field, matching contacts appear.4Tap the contact from the list.5In the Type an SMS message field, type your message.6You can add the media of your choice by tapping and choosing one of the available options.The available options are as follows:Table 13: Message Media TypeIcons DescriptionEmojis - Attach a small digital image or iconto express an idea or emotion.Camera - Take a pictures or record videoand share.Media - Share photos, media, and files.MN005019A01-BChapter 7: Messaging70
Icons DescriptionMicrophone - Record audio and share.Location - Snap your location and share.7Send the message by tapping .MN005019A01-BChapter 7: Messaging 71
Chapter 8Collaboration with LMR RadiosRadio Services is a free application available on the device that enables the LEX device to connectwith a Land Mobile Radio (LMR).You can connect your LEX device with an LMR radio.The supported LMR radios are as follows:Table 14: ASTRO (APX) Radios Supported by LEX L11Release R17.01.00 and Later Releases of the Following ASTRO APX Radio ModelsAPX 6000APX 6000XEAPX 7000APX 7000XEAPX 8000APX 8000XETable 15: TETRA Radios Supported by LEX L11TETRA Radio ModelsTETRA MTP3000 series radiosTETRA MTP6000 series radiosWhen in collaborative mode with a TETRA or APX radio, the LEX device supports both half-duplexprivate calls and group PTT calls sent to and from the TETRA or APX radio.NOTICE:If you cannot access features described in this chapter, contact your device technician for moreinformation.TETRA radios need to be provisioned to use the LEX L11 device as an accessory.8.1Switching Between PSX PTT App and LMR Radio for PTTCommunicationsThe LEX device supports Push-To-Talk (PTT) communications in two different modes – PTT throughLand Mobile Radio (LMR), or Broadband PTT through PSX PTT solution.The LEX device can operate in only one of these modes at a time. You can switch between the twomodes using the PSX Cockpit application.NOTICE: For more information on using the PSX Cockpit application and the PSX Push-to-Talkapplication, see the PSX User Guide and/or WAVE 7000 Push-to-Talk for Mobile Devicesmanual.Prerequisites: Obtain the PSX Cockpit application.MN005019A01-BChapter 8: Collaboration with LMR Radios72
NOTICE: To access the PSX Cockpit sidebar menu settings, you must log on to the PSXCockpit application. If needed, contact your Motorola Solutions representative to obtain anaccount.Procedure:1Swipe the Home screen up from the arrow sign.2On the Apps screen, tap .3Display the PSX Cockpit sidebar menu by tapping .4In the PSX Cockpit sidebar menu, tap the PTT that you currently use.Figure 12: PSX Cockpit Sidebar Menu5In the Push to Talk screen, choose the PTT that you want to use:•If you want to use the LMR radio for PTT communications, select Radio.• If you want to make Broadband PTT calls through the PSX PTT application, select WAVE.Figure 13: Push to Talk ScreenChoosing LMR or WAVE not only sets your choice for PTT functionality, but configures theemergency button.Selecting Radio enables the Radio Services application on the LEX and disables the PSX PTTapplication on the LEX automatically.MN005019A01-BChapter 8: Collaboration with LMR Radios 73
Selecting WAVE automatically enables the PSX PTT application on the LEX and disables theRadio Services application on the LEX.6Tap OK.8.2Pairing Radio with the LEX Device You can pair the LEX device with a Land Mobile Radio (LMR) to send and receive PTT calls. Thedevices remember each other and automatically resume connection when they are on and withinconnection range.Prerequisites: Ensure the following:Verify whether your LMR radio is supported for pairing with the LEX device. For the list of supportedradios, see Collaboration with LMR Radios on page 72.Turn on Bluetooth on the LEX device and on the radio. For more information, see EnablingBluetooth on page 58.Ensure the LEX device is not paired with any previously paired Bluetooth devices. For moreinformation, see Managing Bluetooth Devices on page 59.Procedure:1Swipe the home screen up from the arrow sign.2From the Apps screen, tap Radio Services .Figure 14: Secure Pairing Screen3In the Secure Pairing window, tap Pair.4In the Bluetooth window, set the Bluetooth slidebar to the ON position.5Tap → Refresh and select the radio from the list of available devices.MN005019A01-BChapter 8: Collaboration with LMR Radios74
NOTICE: Ensure the LMR Radio is in discoverable mode.The Bluetooth pairing prompt appears.6Compare the pairing code on the LEX device with the code on the LMR radio and tap Pair.7On the LMR radio, select Accept.The LMR radio is paired with your LEX device.8.3Unpairing Radio from the LEX DeviceYou can follow this procedure to unpair the LEX device from the Land Mobile Radio (LMR).Procedure:1Start the Radio Services application.2In the Radio Services window, tap → Unpair and tap OK.Figure 15: Radio Services Overflow Menu8.4Selecting Zones and ChannelsYou can select zones and channels to communicate with other users.Prerequisites: Ensure your Land Mobile Radio (LMR) is successfully paired with the LEX device.Procedure:1Start the Radio Services application.2Select a zone by tapping a zone of your choice.The Channel selection screen appears, displaying a list of channels available for that zone.MN005019A01-BChapter 8: Collaboration with LMR Radios 75
Figure 16: Channel Selection Screen3Navigate to the parent folder by tapping on the left corner of the current folder name.Figure 17: Navigation in the Channel Selection Screen4Select a channel by tapping a channel of your choice.8.5Adding Favorite TalkgroupsYou can create a list of favorite talkgroups to facilitate contact with other users.Prerequisites: Ensure the Land Mobile Radio (LMR) is successfully paired with the LEX device.Procedure:1Start the Radio Services application.2In the Radio Services window, tap 3Tap and select Edit favorites.4Tap + and add a talkgroup by performing one of the following actions:•Scroll through the list and select the check box next to the talkgroup you want to add toFavorites.MN005019A01-BChapter 8: Collaboration with LMR Radios76
• Search for a talkgroup by entering its name in the search field at the top of the screen andselect the check box next to the talkgroup.5Return to the Radio Services main screen by tapping .8.6Selecting TalkgroupsYou can change talkgroups within a zone by using the talkgroup rocker.For the exact location of the talkgroup rocker on the LEX device, see Device Overview on page 24.NOTICE: You cannot change zones with the talkgroup rocker.If you select a talkgroup added to a Favorites list, the rocker moves in the Favorites list and selectsnext/previous Favorite talkgroup.You receive a tone feedback on each press. When you reach the beginning or the end of a list oftalkgroups, you receive a different tone feedback.NOTICE: If you cannot access this feature on your device, contact your system administrator.Procedure:1If you want to move to the next talkgroup, press and release the talkgroup rocker in the directionof the display.2If you want to move to a previous group, press and move the talkgroup rocker in the directionaway from the display.8.7Sending PTT AudioYou can follow this procedure to start and stop sending PTT audio on the LEX device.The LEX PTT button serves to send audio. When you press the LEX L11 PTT button, the LEXmicrophone is always used for communication.NOTICE: You can also send audio by pressing and holding the PTT button on the Land MobileRadio (LMR). In that case, when the LEX device is paired with a TETRA radio and the LMRPTT button is pressed, the LEX microphone is used to send audio. When the LEX device ispaired with an ASTRO radio and the LMR PTT button is pressed, the ASTRO microphone isused to transmit audio.Procedure:On the LEX device, press and hold the PTT button.For the location of the PTT button on the LEX device, see Device Overview on page 24.The LEX device transmits audio as long as you press the PTT button.8.8Selecting Audio Routing OptionsThe PTT audio can be routed to different sound outputs for the incoming and outgoing audio. You canselect loudspeaker, headset, or earpiece to route audio.Prerequisites: Ensure that the Land Mobile Radio (LMR) is successfully paired with the LEX device.MN005019A01-BChapter 8: Collaboration with LMR Radios 77
NOTICE: The LEX loudspeaker is the default audio output.Procedure:1Start the Radio Services application.2Choose the way of audio routing:NOTICE:You can only select headset if the wired 3.5 mm headset is plugged in.You can only select earpiece if the wired 3.5 mm headset is not plugged in.If… Then…If you want to select loudspeaker, perform the following actions:aTap .bSelect .If you want to select a normal handheldspeaker/earpiece,perform the following actions:aTap .bSelect .If you want to select headset, plug in the 3.5 mm jack of a wired headset.NOTICE: Unplugging the 3.5mmjack automatically selects the out-put used before the headset wasplugged in (loudspeaker or ear-piece).8.8.1Adjusting Sound VolumeYou can perform this procedure to adjust radio sound settings on the LEX device. You can choosedifferent audio routing options.You can also modify sound settings from the Land Mobile Radio (LMR). For more information, see therespective LMR user manual.Prerequisites: Ensure that your LMR radio is successfully paired with the LEX device.Procedure:1Adjust the sound volume by performing one of the following actions:If… Then…If you want to adjust volume using theVolume button* on the device,perform the following actions:•If you want to increase volume, press theupper part of the Volume button.• If you want to decrease volume, pressthe lower part of the Volume button.If you want to adjust sound volume in theRadio Services application,perform the following actions:MN005019A01-BChapter 8: Collaboration with LMR Radios78
If… Then…aFrom the Home screen, tap → .bIn the Radio Services window, tap .cSet the radio volume by adjusting the Ra-dio volume slidebar.Figure 18: Radio Volume SlidebarNOTICE: *See the Volume button in Device Overview on page 24.8.9Emergency Mode on LEX Device Paired with LMRWhen Land Mobile Radio (LMR) is paired with a LEX device and the Emergency button is pressed (onany device where LMR is present), the LEX device reacts based on what LMR channel the user is onand what Emergency Mode that channel is assigned.The LEX device initiates an emergency by pressing the emergency button on the LEX device. See Enabling Emergency Mode on page 80.The following types of Emergency Modes are available and are configurable by your technician:• Emergency Alert - A LEX device that is on a channel provisioned with this Emergency Mode sendsan alert over the channel.• Emergency Call - A LEX device on a channel provisioned with this Emergency Mode gives the userthat pressed the Emergency button (the initiator) the top priority on the channel.• Emergency Alert with LMR Emergency call - A LEX device that is on channel provisioned with thisEmergency Mode sends an alert and give the user top priority on the channel.• Silent Emergency Alert - A LEX device that is on a channel provisioned with this Emergency Modesilently sends an alert over the channel.When the LEX device is paired with an LMR radio and an emergency is activated, it is equivalent topressing the LMR emergency button. If you are not paired with an LMR radio or the emergency fails(for example out of range), you can use the PSX Cockpit application to switch between the PSX PTTapp and LMR. See Switching Between PSX PTT App and LMR Radio for PTT Communications onpage 72. For more details on emergency, see Emergency Services on page 80, and the WAVE 7000Push-to-Talk for Mobile Devices manual.MN005019A01-BChapter 8: Collaboration with LMR Radios 79
Chapter 9Emergency ServicesThis chapter describes emergency services available on the LEX L11 device.The LEX L11 allows you to enter emergency mode in a critical situation. You can also makeemergency calls from the device.9.1Emergency Mode Alert SettingsEmergency Mode indicates a critical situation, and triggers actions in applications, for example inPublic Safety Experience (PSX) applications. The emergency alert signal overrides any othercommunication on the LEX device.NOTICE:Contact your System Administrator to set up other emergency alert notifications if required.If no application supporting the emergency mode is installed, pushing the Emergency buttondoes not trigger any actions.The following are examples of actions that can be triggered in applications that support the emergencymode when you press the Emergency button:• Initiate an emergency call only• Send an SMS including your location• Initiate a call and SMSNOTICE: For more information on the PSX Cockpit Emergency button, see the PSX UserGuide.9.1.1Enabling Emergency ModeEmergency Mode indicates a critical situation. The emergency alert signal overrides any othercommunication over the selected channel of the radio.NOTICE: For information how to exit the emergency mode and what actions are triggered bypressing the Emergency button, contact your device administrator.Procedure:Press and hold the Emergency button for more than three seconds.For the exact location of the Emergency button on the LEX device, see Device Overview onpage 24.9.2Emergency CallsEmergency numbers are pre-programmed in your phone. They can vary by country and by the type ofcommunication network. The pre-programmed emergency numbers may not work in all locations, andsometimes an emergency call cannot be placed due to network, environmental, or interference issues.For additional information, contact your system administrator.MN005019A01-BChapter 9: Emergency Services80
If your phone has settings to disable Caller ID (by selecting Phone → Settings → Calls → Additionalsettings → Caller ID), be aware that disabling Caller ID prevents an the emergency operator fromobtaining caller information needed to assist you. If you disable Caller ID for a specific call, you mustenable it again immediately after that call.9.2.1Making Emergency CallsProcedure:Make an emergency call on a LEX device by performing one of the following actions:If… Then…If you need to make an emergency call ona locked LEX device,perform the following actions:•On the locked device screen, tap EMER-GENCY to display the dialer.• Enter the emergency number (112 and911 are always available).• Tap to initiate the call.If you need to make an emergency call onan unlocked LEX device,perform the following actions:aOn the Home screen, tap .bTap to display the dialer.cEnter the emergency phone number.dTap to initiate the call.9.3Configuring Emergency Broadcast Alert SettingsConfiguring the emergency broadcast settings allows you to receive warnings about dangerousweather, missing people, or any threats to your life and/or health.Procedure:1Swipe the home screen up from the arrow sign.2From the Apps screen, tap → Sound → Emergency broadcasts.3Select the check boxes next to the settings that you want to enable.4If you want to set an alert reminder, tap Alert reminder and, in the list, select a radio button nextto the setting of your choice.The following settings are available:OnceEvery 2 minutesEvery 15 minutesOffMN005019A01-BChapter 9: Emergency Services 81
Chapter 10IMS VoLTEIn this chapter, the term "IMS" is used to indicate IP Multimedia Subsystem, which is a type ofcommunication network. You can ask your system administrator if that type of network is implementedon your phone.IMS supports voice, video, and conference calling, and a variety of other multimedia services.IMS voice calls use the standard Android dialer and Contacts application. Emergency calling isavailable (See Emergency Services on page 80).The following additional features might be enabled on your LEX device if it operates on an IMS network(contact your system administrator for more information):• IMS Video Calls• IMS Conference Calls• IMS Voice Mail• IMS Supplementary Services• IMS Messaging (SMS and MMS)• IMS Clear Tone - An optional IMS feature enabled by the agency to notify the user that they are ona clear call (non-secure).NOTICE: If your Organization must make calls in a secure (encrypted) environment, see PublicSafety Experience (PSX) Applications on page 103.10.1Making IMS VoLTE CallsYou can follow these steps to make a Voice over LTE (VoLTE) voice call.If your system supports VoLTE calling, users can make and receive calls to, and from other users, overan LTE IP Multimedia Subsystem (IMS) network.Procedure:1On the Home screen, tap .2In the To field, type a name or phone number. As you enter text, matching contacts appear. Tapa contact from the contact list.User can also initiate calls to contacts from the following actions:If... Then...You want to call a contact, Tap .You want to call a contact in your favorites, Tap .You want to make a call with the dialer, Tap .MN005019A01-BChapter 10: IMS VoLTE82
3Tap to initiate the call.If... Then...You want to turn on the speakerphone, Tap .You want to mute the call, Tap .4Tap to end the call.10.2Making IMS Video CallsIf your system supports VoLTE, users can make and receive video calls to, and from other users, overan LTE IMS network.NOTICE: This feature may not be available on all networks.Prerequisites: If you are making video calls, user must enable the Video Calling setting. See EnablingIMS Video Calling on page 85.Procedure:1On the Home screen, tap .2In the To field, type a name or phone number. As you enter text, matching contacts appear.User can also initiate calls to contacts from the following actions:If... Then...You want to call a contact in your favorites, Tap Favorites .You want to call a contact in your history list, Tap History .You want to make a call with the dialer, Tap .You want to call a contact, Tap .3Tap to initiate the call.If... Then...You want to turn on the speakerphone, Tap .You want to mute the call, Tap .MN005019A01-BChapter 10: IMS VoLTE 83
4Tap → Video Call. The call is placed on hold.5From the Which type of call window, select a call type.•NOTICE: While ViLTE call in progress, each user will see video on their respectivedevice for full duplex video. In case of send only or receive only, the contact picturedisplays.•Voice Only - Audio Only•Video Transmit - Video Send only•Video Receive - Video Receive only•VT - Video send/receive6Tap to end the call.10.2.1Receiving IMS Video CallsIf your private system supports VoLTE calls, users can receive a video call from another user.NOTICE: This feature may not be available on all networks.Procedure:1When callee receives a video call, user swipes one of the following choices from the devicescreen:•Voice Only - Audio Only•Video Transmit - Video Send only•Video Receive - Video Receive onlyMN005019A01-BChapter 10: IMS VoLTE84
•VT - Video send/receiveFigure 19: Receiving Video CallNOTICE: While ViLTE call in progress, each user will see video on their respectivedevice for full duplex video. In case of send only or receive only, the contact picturedisplays.2Tap to end the call.10.2.2Enabling IMS Video Calling You can use this procedure to configure Video Calling. If you are unable to configure Video Callsettings on the LEX device, contact your system administrator.Video Calling allows the user to send and receive Video Calls.NOTICE: This feature may not be available on all networks.Procedure:1Tap .2From the drop-down menu , select Settings → Calls.3Tap Turn on Video Calling to enable.MN005019A01-BChapter 10: IMS VoLTE 85
10.3Making IMS Multi-Party Conference CallsYou can use this procedure to create a conference phone session with up to three people on the LEXdevice.If your private system supports Voice over LTE (VoLTE) calls, you can make and receive conferencecalls to and from other users. If you are unable to use Multi-Party Conference calling, contact yoursystem administrator.Procedure:1On the Home screen, tap .2In the To field, type a name or phone number to add recipients. As you enter text, matchingcontacts appear. Tap from the contact list.You can also initiate calls to contacts from the following actions:If... Then...You want to call a contact, tap .You want to call a contact in your favorites, tap Favorites .You want to call a contact in your history list, tap History .You want to make a call with the dialer, tap .3Tap to initiate the call.If... Then...You want to turn on the speakerphone, tap .You want to mute the call, tap .4When the call connects, tap .5Add another recipient by performing steps in step 2.6Tap to initiate the call.When the call connects, the first call is placed on hold and the second call is active.7Tap to create a conference call.8Tap to rotate between the individual calls.Calls are rotated starting with the first call. This allows you to speak privately to one party. Tap to rotate to the next party. When the rotation is complete, you are placed back intoconference mode and all calls are active.MN005019A01-BChapter 10: IMS VoLTE86
10.4IMS VoicemailThis section provides information on VoiceMail Services where LEX device users can receiveVoiceMail messages from other users that have connectivity to the operator. If you are unable to useVoiceMail services on the LEX device, contact your system administrator.Voicemail is a method of storing voice messages electronically for later retrieval by intended recipients.Your system administrator enables voicemail services and configures the voicemail number. Userscannot change the assigned voicemail number on the LEX device. If VoiceMail is enabled, the usercan configure settings in the LEX device that may affect the way VoiceMail will operate.NOTICE: When switching between networks, you LEX device phone number is not the same.Contact your system administrator for further details.You can initiate the following actions:•Leave a voicemail message.• Retrieve a voicemail message.• Select, play, and manage (create/modify greeting/delete messages).• Receive a voicemail notification.• Configure message sound and vibrate. See Enabling IMS VoiceMail Notification Sounds on page87.• Manage voicemail settings. See Enabling IMS Call Forwarding on page 89.IMPORTANT:If you change the Call Forwarding setting on the LEX device to a number different from thevoicemail number received from the device management, the calls will no longer route to thevoicemail server.In some deployments, the voicemail number is not received from the device management.10.4.1Enabling IMS VoiceMail Notification Sounds You can use this procedure to configure VoiceMail notification sounds.VoiceMail allows you to sendand receive voice messages with notification sounds. If you are unable to configure VoiceMail settingson the LEX device, contact your system administrator.Procedure:1Tap .2From drop-down menu , select → Settings → Calls → VoiceMail.3Complete the following actions:•Tap Sound and select a notification sound.• Tap Vibrate to enable vibration on received voicemail messages.MN005019A01-BChapter 10: IMS VoLTE 87
10.5IMS Supplementary ServicesThis section provides information on Supplementary Services over IMS for the LEX device on a privatenetwork. Supplementary services are available on IMS networks and provides the user withconfigurable device settings to manage calling capabilities on the LEX device.NOTICE: On some networks, this feature may be only partially available or not available at all.Contact your Agency Device Administrator for more information.All supplementary service configurations managed from the device are not saved on the server. If aLEX device requires a reset, the configured settings default to the system configuration. If unable toconfigure supplementary services on the LEX device, contact your system administrator.You may configure some of the following supplementary services on the LEX device:NOTICE: Some of these supplementary services may not be available for all networks.•Call Hold - During an active call, the LEX user can place the active call on hold. To configure callhold on your LEX device, see Placing IMS VoLTE Call on Hold on page 88.•Communication Waiting - During an active call, if another caller calls your LEX device, the userhas the option to Answer or Decline the incoming call. To configure Call Waiting on the LEXdevice, see Enabling IMS Call Waiting on page 89.•Call Forwarding - User can forward incoming calls to the LEX device to a different number. Toconfigure Call Forwarding on the LEX device, see Enabling IMS Call Forwarding on page 89 .•Call Barring - User can prevent incoming, outgoing, or both types of calls from calling your phone.To configure Call Barring on the LEX device, see Enabling IMS Call Barring on page 90.•Originating Identification Restriction (OIR), also known as Caller ID Restriction - User canwithold their identity (ID) from being displayed to another LEX device when making a call over IMS,see Enabling and Disabling Caller ID in an IMS System on page 90.10.5.1Placing IMS VoLTE Call on Hold You can use this procedure to place an active IMS VoLTE call on hold. If you are unable to place callson hold on the LEX device, contact your system administrator.NOTICE: This feature may not be available on all networks.Procedure:1During an active call, tap the Hold icon to place the call on hold.2To resume the active call, tap the Hold icon again.NOTICE: The Hold button is not available during an Emergency call.MN005019A01-BChapter 10: IMS VoLTE88
10.5.2Enabling IMS Call WaitingYou can use this procedure to enable or disable Call Waiting settings. If you are unable to configurecall waiting on your LEX device, contact your system administrator.NOTICE: This feature may not be available on all networks.Procedure:1Tap .2From drop-down menu , select → Settings → Calls → Additional Settings.3Tap to enable Call Waiting.10.5.3Enabling IMS Call ForwardingYou can follow this procedure to enable IMS Call Forwarding.Call Forwarding immediately redirects calls intended for your LEX device to another number. You canstill make outgoing calls when this feature is turned on. If you turn off all Call Forwarding features, thedevice sets all conditional call forwarding to the voicemail number and the calls will route to thevoicemail server.NOTICE:This feature may not be available on all networks. If you are unable to configure CallForwarding settings on the LEX device, contact your system administrator.The default call forwarding number is preconfigured to the voicemail number. If you change theCall Forwarding setting to a number different from the voicemail number received from thedevice management, the calls will no longer route to the voicemail server.Procedure:1Tap .2From drop-down menu , select Settings → Calls → Call Forwarding → Voice.3Enable the settings of your choice.The available settings are:Table 16: Calling Accounts SettingSetting DescriptionAlways Forward All incoming calls are sent to the numberyou specify; your phone does not ring.This option overrides all other forwardingoptions.Forward Implicitly Calls are forwarded when you are on thephone.Deactivate All All call forwarding options are disabled.All calls are sent to the voicemail num-ber.MN005019A01-BChapter 10: IMS VoLTE 89
10.5.4Enabling IMS Call BarringYou can use this procedure to configure Call Barring.Call Barring allows you to restrict certain types of incoming and outgoing calls from your LEX device.NOTICE:Barring of only video or only audio is not supported.This feature may not be available on all networks. If you are unable to configure Call Barringsettings on the LEX device, contact your system administrator.Procedure:1Tap .2From drop-down menu , select → Settings → Calls → Call Barring.You can configure the following settings:Outgoing call barringAllows you to bar outgoing International and Roaming audio and video calls.Incoming call barringAllows you to bar incoming Roaming audio and video calls.3Configure the Outgoing call barring setting by performing the following actions:aTap Outgoing call barring and select one of the following options:•Off• International roam call• International call• Outgoing callbIn the Input Password window, enter call barring password and tap OK.4Configure the Incoming call barring setting by performing the following actions:aTap Incoming call barring, enter password, and select one of the following options:• Off• Roaming• AllbIn the Input Password window, enter call barring password and tap OK.10.5.5Enabling and Disabling Caller ID in an IMS SystemYou can use this procedure to configure the Caller ID restriction on the LEX device.Origination Identifcation Restriction (OIR), also known as Caller ID restriction, allows you to restrict theuser identity on outgoing calls to other callers directly from the LEX device.NOTICE: This feature may not be available on all networks. If you are unable to configure theCaller ID restriction settings on the LEX device, contact your system administrator.Procedure:1Tap .MN005019A01-BChapter 10: IMS VoLTE90
2From drop-down menu , select → Settings → Calls → Additional Settings.3Tap Caller ID and tap to disable.10.6IMS MessagingIf your system and LEX device support text messaging, users can make and receive text messages to,and from other users, over an LTE IMS network. If you are unable to text messages on the LEX device,contact your system administrator.Prerequisites: Users can install messaging apps from the Google Play Store to use on the IMSnetwork. If you are sending to multiple users, you must configure the Group Messaging setting beforesending a text. See Enabling IMS Group Messaging on page 91.NOTICE:For IMS messaging, you can use the Messaging app on the device.Multi-media messages (camera, recorded voice, images, and so on) are not supported in theIMS network.Procedure:1From Home or Apps screen, tap .2In the bottom-right, tap .3In the To field, type a name or phone number. As you enter text in the field, matching contactsappear. Tap the contact from the list.If Group Messaging is enabled, you can add a contact or multiple contacts by tapping TopContacts.4Tap .5Tap the Send message box and type a message.Messages are limited to 160 characters. When the limit is approached, a counter displays,above the Send icon, showing how many characters are left. If the limit is reached and the userkeeps typing, a new message is created, which is joined with its predecessors when received.6Send a message by tapping .10.6.1Enabling IMS Group Messaging You can follow this procedure to enable group messaging on the device.Access to the SMS and MMS settings are available through the Messaging settings on the device.Preference settings allow you to configure Notifications and Group Messaging options on the device.This option is turned off as a default.MN005019A01-BChapter 10: IMS VoLTE 91
NOTICE: MMS group messaging may not be available for all networks.Procedure:1Tap .2From drop-down menu , select → Settings → Advanced → Group Messaging.3To enable SMS group messaging, tap Send an SMS reply to all recipients and get individualreplies (mass text).4To enable MMS group messaging, tap Send an MMS reply to all recipients (group MMS).MN005019A01-BChapter 10: IMS VoLTE92
Chapter 11ApplicationsThis chapter contains information on applications available on the LEX L11 device.NOTICE: For information on applications available on your LEX device and applicationlimitations related to specific networks your LEX device operates in, contact your AgencyDevice Administrator.11.1ApplicationsTable 17: LEX L11 ApplicationsIcon DescriptionAirWatch Agent: allows to provision the deviceand perform ongoing management procedures.AirWatch Remote Management: allows you toconnect to end-user devices in order to performmaintenace and troubleshooting procedures.Android System Webview: allows Androidapps to display web content.Calculator : provides the basic and scientificarithmetic functions.Camera: use to take photos.Chrome: use to access Internet.Clock: use to set an alarm, stopwatch, or timer.Contacts: use to manage contact information.CRYPTR Manager: The CRYPTR micro en-cryption card is used for voice encryption in fea-tures such as data and phone over Virtual Pri-vate Network (VPN) and Push-to-Talk (PTT)communication.Downloads: lists all downloaded files.File Manager: use to view and manage files.Gallery: use to view photos stored on the de-vice.Gmail: use to send and receive emails.Google Calendar: use to manage events andappointments.MN005019A01-BApplications 93
Icon DescriptionGoogle Drive: access to files anywherethrough secure cloud storage and file backupfor your photos, videos, files and more.Google Duo: use to make video calls.Google Keep: use to create, store, and catego-rize notes, lists, reminders, images, audio, andmany more.Google Maps: find local businesses, viewmaps and get driving directions.Google PDF viewer: use to view .pdf files.Google Play Movies & TV: buy or rent moviesand TV shows.Google Play Services: updates Google appli-cations.Google Photos: use to view photos stored onthe device.Google Play Music: access music stored onthe device.Google Play Store: Google app store for An-droid devices with games, applications, movies,and more.Google Search: allows you to find what youneed on the web and on your device.Google Street View: provides panoramic viewof many streets in the world.Google TalkBack: helps vision-impaired usersinteract with their devices.Google Text-to-speech: reads the text on yourscreen aloud.Google Translate: online language translationservice. Instantly translates text and web pages.Messages: send SMS and MMS messages.Phone: use to make phone calls.Radio Management Link Client (RM Link):enables connecting the device to a remote hostcomputer for staging, firmware installation, ap-plication installation, and application removal bytechnical support. See the Radio ManagementOnline Help for more information on the RM Ap-plication.Settings: use Settings to configure the device.MN005019A01-BChapter 11: Applications94
Icon DescriptionYouTube: you can use this app to view videosand music.11.2CameraThis section provides information on taking photos and recording video files by using the Cameraapplication available on your LEX device.11.2.1Taking PhotosYou can take photos in normal or panoramic mode.Procedure:1Open the Camera application.2Perform one of the following actions:If… Then…If you want to take a picture in normalmode,perform the following actions:aOpen the mode selection bar located atthe bottom-right corner of the screen bytapping .Figure 20: Mode Selection BarbSelect .cIf you want to adjust camera settings, tap and select the settings of yourchoice.dFrame the subject on screen.eTo zoom in or out, press two fingers onthe display and pinch or expand fingers.The zoom controls appear on the screen.fTake a picture by tapping .If you want to take a picture in panoramicmode,perform the following actions:MN005019A01-BChapter 11: Applications 95
If… Then…aOpen the mode selection bar located atthe bottom-right corner of the screen bytapping .Figure 21: Mode Selection BarbTap .cStart capturing the picture from the left-most edge of the image and move to-wards the rightmost edge.dStop capturing by tapping .11.2.2Recording VideosThis section describes using the Camera application for recording video.Procedure:1Open the Camera application.2Open the mode selection bar located at the bottom-right side of the window by tapping .Figure 22: Mode Selection Bar3Select .4If you want to adjust video settings, tap and select the settings of your choice.5Start recording by tapping .6To zoom in or out, press two fingers on the display and pinch or expand fingers.The zoom controls appear on the screen.7Finish recording by tapping .MN005019A01-BChapter 11: Applications96
11.3GalleryGallery is used to manage your photos and videos.NOTICE: The device supports the following image formats: JPEG, GIF, PNG, and BMP.You can use Gallery to:•View photos.• Play videos.• Perform basic editing of photos.• Set photos as a wallpaper.• Set photos as a contact photo.• Share photos and videos.The Gallery application is located at Apps screen → .Gallery contains all photos and videos stored on the microSD card and in the internal memory.11.3.1AlbumsAlbums are groups of images and videos in folders.Photos and videos grouped together in an album are listed in a chronologically ordered grid. The nameof the album displays at the top of the screen.11.3.1.1Sharing AlbumsProcedure:1Open the Gallery application by tapping .2Tap the triple-bar menu in the upper-left corner of the screen and select Albums.3Tap and hold an album until it becomes highlighted.4Tap .Share applications are displayed.5Select the application that you want to use.6Follow the instructions within the selected application.11.3.1.2Checking Album InformationProcedure:1Open the Gallery application by tapping .2Tap the triple-bar menu in the upper-left corner of the screen and select Albums.3Tap and hold an album until it becomes highlighted.MN005019A01-BChapter 11: Applications 97
4Tap .5Tap Details.11.3.1.3Deleting AlbumsProcedure:1Open the Gallery application by tapping .2Tap the three horizontal lines in the upper-left corner of the screen and select Albums.3Tap and hold an album until it becomes highlighted.4Tap .5Delete the album by tapping OK.11.3.2PhotosIn the Gallery application, you may view, rotate, crop, share, and delete photos.11.3.2.1Viewing and Browsing PhotosProcedure:1Open the Gallery application by tapping .2Tap the triple-bar menu in the upper-left corner of the screen and select Albums.3Tap an album of your choice.4Tap a photo.5To view the next or previous photo in the album, swipe left or right.6To view the photo in upright (portrait) or sideways (landscape) orientation, turn the LEX device.The photo is displayed (but not saved) in the new orientation.7View the controls by tapping the photo.8Zoom in by double-tapping the screen, or zoom in or out by pinching two fingers together orspreading them apart.9View parts that are not in view by dragging the photo.11.3.2.2Rotating PhotosProcedure:1Open the Gallery application by tapping .2Tap the triple-bar menu in the upper-left corner of the screen and select Albums.3Tap the album that contains the photo you want to rotate.4View the controls by tapping the photo.MN005019A01-BChapter 11: Applications98
5Open the editing view by tapping .6Tap .7Rotate the photo by tapping .The photo rotates 90° clockwise. Each tap rotates the photo another 90°.8Save the changes by tapping SAVE.11.3.2.3Cropping PhotosProcedure:1Open the Gallery application by tapping .2Tap the triple-bar menu in the upper-left corner of the screen and select Albums.3Tap the album that contains the photo you want to crop.4View the controls by tapping the photo.5Edit the photo by tapping .6Tap .7Enter the cropping mode by tapping .The cropping grid appears.8To crop the photo, perform one of the following actions:If… Then…If you want to crop the photo manually, perform the following actions:aAdjust the endpoints to select the portionof the photo to crop.bTap .If you want to choose automatic croppingdimensions,perform the following actions:aTap 1:1.bIf you want to view the original photo, tapOriginal.cConfirm by tapping .dSave changes by tapping SAVE.11.3.2.4Setting Photos as Contact IconsProcedure:1Open the Gallery application by tapping .2Tap the triple-bar menu in the upper-left corner of the screen and select Albums.MN005019A01-BChapter 11: Applications 99
3Tap the album that contains the photo you want to set as a contact icon.4Tap the photo.5Tap .6Tap Set picture as.7Select Contact photo and select a contact of your choice.8Tap Crop picture.9Crop the photo accordingly as described in Cropping Photos on page 99.10 Tap SAVE.11.3.2.5Sharing PhotosProcedure:1Open the Gallery application by tapping .2Tap the triple-bar menu in the upper-left corner of the screen and select Albums.3Tap the album that contains the photo you want to share.4Tap the photo or photos of your choice.5Tap .6Tap the application to use for sharing the selected photo.11.3.2.6Deleting PhotosProcedure:1Open the Gallery application by tapping .2Tap the triple-bar menu in the upper-left corner of the screen and select Albums.3Tap the album that contains the photo you want to delete.4Tap the photo or photos of your choice.5Tap .6Confirm by tapping OK.11.3.3VideosIn the Gallery application, you can view videos saved on the microSD card and share videos.11.3.3.1Watching VideosProcedure:1Open the Gallery application by tapping .2Tap the triple-bar menu in the upper-left corner of the screen and select Albums.MN005019A01-BChapter 11: Applications100
3Tap the album that contains the video you want to watch.4Tap the video you want to watch.5Tap .6Select the application you want to use to watch the video.7To see the playback controls, tap the screen.Figure 23: Video Playback Controls8To return to the previous screen, double-tap .11.3.3.2Sharing VideosProcedure:1Open the Gallery application by tapping .2Tap the triple-bar menu in the upper-left corner of the screen and select Albums.3Tap the album that contains the video you want to share.4Tap the video.5Tap .The Share via menu appears.6Tap the application you want to use to share the selected video and follow the on-screeninstructions.11.3.3.3Deleting VideosProcedure:1Open the Gallery application by tapping .MN005019A01-BChapter 11: Applications 101
2Tap the triple-bar menu in the upper-left corner of the screen and select Albums.3Tap the album that contains the video you want to delete.4Tap the video.5Tap .6Delete the video by tapping OK.11.4Turning On the FlashlightProcedure:1Open the Notifications panel by swiping the screen down from the Status bar.2Tap .11.5Taking Screen CapturesYou can take screen captures of the currently displayed screen.Procedure:Press the POWER BUTTON and the VOLUME DOWN button simultaneously.The screen capture is saved in the device memory.11.6Managing DownloadsYou can download, install, view your applications and media files, when your device is connected tothe Internet through Wi-Fi or service provider network. You can download files from Google, or othersources, open, and edit them.Procedure:1Manage application downloads by tapping Downloads .2From the triple-bar menu in the upper-left corner of the screen, select the type of file you want tomanage.3Open an item by tapping it.4If you want to share a downloaded item, tap and hold the selected item.aTap .bIn the Share via menu, select the application you want use to share the downloaded item.5If you want to delete downloaded items, check items you want to delete and tap .MN005019A01-BChapter 11: Applications102
11.7Exploring FilesYou can use the File Manager application to navigate to folders/files, edit them, and create new ones.Procedure:1Swipe the home screen up from the arrow sign.2Tap .The main screen appears, displaying the storage available on your device.3Tap the folder you want to open.4To perform more actions in the File Manager application, tap the three dots in the bottom-leftcorner of the screen.The following options are available:•Properties – the properties of a selected folder or file, for example type, size, modified date,and others.•Refresh – refreshes the application.•New folder – allows you to create a new folder.•New file – allows you to create a new file.•Select all – selects all folders and files.•Deselect all – deselects all folders and files.•Add to bookmarks – adds folders and/or files to the bookmarks.•Add shortcut – creates a shortcut to a selected folder or file.•Set as home11.8Public Safety Experience (PSX) ApplicationsThe following PSX applications are available from Motorola Solutions, as part of an end-to-end solutionthat also includes servers to manage licensing, contacts, security, and settings:NOTICE: To obtain the Public Safety Experience solution, contact Motorola Solutions Support.PSX MappingA mapping application that integrates with PSX Messenger. Allows you to present devices on amap in near real time along with the location of those devices. It also allows performing additionalactions, such as navigating to the selected user, or instantly starting a call.PSX MessengerA messaging application that integrates with PSX Home Screen and PSX Mapping. Allows you tosend text messages to individuals and groups. You can attach photos, video and audio recordings,and maps showing your current location or another selected location. Taking photos, recordingaudio, viewing maps or using other applications is possible without closing the Messenger.PSX PTTTurns your LTE device into a multi-channel push-to-talk (PTT) handset for fully secure, real-timePTT voice communications anywhere you have a network connection.PSX Secure CallingProvides Secure Voice over IP (SVoIP) communication between individuals in an agency withoption of deploying connectivity to an existing PBX.MN005019A01-BChapter 11: Applications 103
PSX CockpitPSX Cockpit mobile app client that bundles multiple Intelligent MiddleWare (IMW) functions for LTEdevices. It is a central application that manages initial configuration, setting statuses, presenceinformation, triggering emergency mode, clearing emergency mode, and other central functions forPSX applications.MN005019A01-BChapter 11: Applications104
Chapter 12AccessoriesThe LEX L11 device can be used with Motorola Solutions accessories.12.1AccessoriesThis section lists supported accessories and their part numbers.NOTICE: To ensure regulatory compliance, you must use only Motorola Solutions approved,supplied, or replacement batteries and accessories.Carry AccessoriesTable 18: Carry AccessoriesAccessory Name Part NumberAccessory kit, vehicular charger, with suctionbasePMLN7912ALEX L11 Carry Case with Peter Jones Stud PMLN7845AChargersTable 19: Chargers (USB-C)Charger Type Part NumberMSI in-box supplied travel charger PS000150A31 – US/JPN PlugPS000150A32 – EU PlugPS000150A33 – UK/HK PlugPS000150A34 – AU/NZ PlugPS000150A35 – ARG PlugPS000150A36 – CHN PlugPS000150A37 – KOR PlugPS000150A38 – BZL PlugMSI optional Quickcharge travel charger (withPD/QC4) PS000278A01 – US/JPN PlugPS000278A02 – EU PlugPS000278A03 – UK/HK PlugPS000278A04 – AU/NZ PlugPS000278A05 – ARG PlugPS000278A06 – CHN PlugPS000278A07 – KOR PlugPS000278A08 – BZL PlugMSI Multi-Unit Charger PMPN4341A – EU Power CordPMPN4342A – UK/HK Power CordPMPN4343A – Aus/NZ Power CordMN005019A01-BAccessories 105
Charger Type Part NumberPMPN4344A – Argentina Power CordPMPN4345A – CHN Power CordPMPN4346A – KOR Power CordPMPN4347A – BZL Power CordPMPN4348A – JPN Power CordPMPN4349A – US Power CordMSI Desktop Charger PMPN4351A – EU PlugPMPN4352A – UK/HK PlugPMPN4353A – AU/NZ PlugPMPN4354A – ARG PlugPMPN4355A – CHN PlugPMPN4356A – KOR PlugPMPN4357A – BZL PlugPMPN4358A – JPN PlugPMPN4359A – US PlugMSI Vehicle Power Adapter (with PD) PMLN7779ABatteriesTable 20: BatteriesDescrip-tionBuild-/VintageBatteryCapacity(mAh)BatteryNominalVoltage(V)BatteryTypeCountryof OriginPart Num-berStandardbattery(STD)PRE-PI-LOT2500mAh 3.7V LI-ION Malaysia PMNN4545High-ca-pacity bat-tery (HI-CAP)PRE-PI-LOT5000mAh 3.7V LI-ION Malaysia PMNN4546MN005019A01-BChapter 12: Accessories106
Chapter 13Maintenance and TroubleshootingThis chapter includes instructions on cleaning and storing the device and provides troubleshootingsolutions for potential problems during device operation.13.1Installing Firmware UpdatesYou can follow this procedure to update the device firmware.Prerequisites:Make sure your device has Internet connection.Perform this procedure once a system update becomes available for your device.Make sure the battery level is at least 50%.NOTICE:To avoid high mobile data charges, connect your device to a Wi-Fi network.Once a system update is available, a System Update Available notification appears on theNotifications panel.Procedure:1From the Notifications panel, tap System Update Available.2Select Download.3In the Update new SW window, tap Download.When the download completes, the System Update Downloaded notification appears on theNotifications panel.4From the Notifications panel, tap System Update Downloaded and select Install.5In the Update new SW window, select Restart and install.13.2Maintaining LEX Device For trouble-free service, observe the following tips when using the LEX device:• Do not scratch or use a pen or a pencil or other sharp object on the surface of the screen.• The touch-sensitive screen is made of polycarbonate. Do not to drop or subject the device to strongimpact.• Protect from extreme temperatures. Do not leave device on the dashboard of a car on a hot day,and keep it away from heat sources.• Do not store in any location that is dusty, damp, or wet.• Use a soft lens cloth to clean the device. If the surface of the screen becomes soiled, clean it with asoft cloth moistened with isopropyl alcohol.• Periodically replace the rechargeable battery to ensure maximum battery life and productperformance. Battery life depends on individual usage patterns.MN005019A01-BMaintenance and Troubleshooting 107
13.3Battery Safety GuidelinesAdhere to the following guidelines for battery safety:•The area where the units are charged should be clear of debris and combustible materials orchemicals.• Follow battery usage, storage, and charging guidelines found in this guide.• Improper battery use may result in a fire, explosion, or other hazard.• To charge the battery, the battery and charger temperatures must be between +32 ºF and +113 ºF(0 ºC and +45 ºC)• Do not use incompatible batteries and chargers. Use of an incompatible battery or charger maypresent a risk of fire, explosion, leakage, or other hazard. If you have any questions about thecompatibility of a battery or a charger, contact Motorola Solution support.• If charging through a USB port, the device shall only be connected to products that bear the USB-IFlogo or have completed the USB-IF compliance program.• To enable authentication of an approved battery, as required by IEEE1725 clause 10.2.1, allbatteries will carry a Motorola hologram. Do not fit any battery without checking it has the Motorolaauthentication hologram.• Do not disassemble or open, crush, bend or deform, puncture, or shred.• Severe impact from dropping any battery-operated device on a hard surface could cause the batteryto overheat.• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse orexpose to water or other liquids, or expose to fire, explosion, or other hazard.• Do not leave or store the equipment in or near areas that might get very hot, such as in a parkedvehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer.• Battery usage by children should be supervised.• Follow local regulations to properly dispose of used rechargeable batteries.• Do not dispose of batteries in fire.• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. Ifcontact has been made, wash the affected area with large amounts of water and seek medicaladvice.• If you suspect damage to your equipment or battery, contact Motorola Solutions support to arrangefor inspection.13.4Cleaning GuidelinesThis section includes cleaning guidelines for the LEX device.WARNING: Avoid exposing this product to contact with hot oil or other flammable liquids. Ifsuch exposure occurs, unplug the device and clean the product immediately in accordance withthese guidelines.CAUTION:Always wear eye protection.Read the warning labels on compressed air and alcohol products before use.If you have to use any other solution for medical reasons, contact Motorola Solutions for moreinformation.MN005019A01-BChapter 13: Maintenance and Troubleshooting108
Approved Cleanser Active Ingredients100% of the active ingredients in any cleaner must consist of one or a combination of the following:isopropyl alcohol, or mild dish soap.Cleaning InstructionsDo not apply liquids directly to the device. Dampen a soft cloth or use pre-moistened wipes. Do notwrap the device in the cloth or wipe, but gently wipe the unitHarmful IngredientsMany vinyl gloves contain phthalate additives, which are often not recommended for medical use andare known to be harmful to the housing of the device. The device should not be handled while wearingvinyl gloves containing phthalates, or before hands are washed to remove contaminant residue aftergloves are removed. If products containing the harmful ingredients are used before handling thedevice, such as hand sanitizers containing ethanolamine, hands must be completely dry beforehandling the device to prevent damage to the plastics.Cleaning Materials Required• Alcohol wipes• Lens tissue• Cotton-tipped applicators• Isopropyl alcohol• Can of compressed air with a tubeCleaning FrequencyThe cleaning frequency is up to your discretion due to the varied environments in which the mobiledevices are used. They may be cleaned as frequently as required, but it is advisable to clean thecamera window periodically when used in dirty environments to ensure optimum performance.13.5Cleaning LEX DeviceThis section includes instructions on how the LEX device should be cleaned.HousingUsing the alcohol wipes, wipe the housing including buttons.DisplayThe display can be wiped down with the alcohol wipes, but care should be taken not to allow anypooling of liquid around the edges of the display. Immediately dry the display with a soft, non-abrasivecloth to prevent streaking.Camera WindowWipe the camera window periodically with a lens tissue or other material suitable for cleaning opticalmaterial such as eyeglasses.MN005019A01-BChapter 13: Maintenance and Troubleshooting 109
13.6Cleaning Interface ConnectorWhen and where to use: Use this procedure to clean the contacts of the interface connector on LEXdevice.Procedure:1Power off the device.2Dip the cotton portion of the cotton-tipped applicator in isopropyl alcohol.3Rub the cotton portion of the cotton-tipped applicator along the contacts of the interfaceconnector. Slowly move the applicator back-and-forth from one side of the connector to theother.4If grease and other dirt can be found on other areas of the cradle, remove using a lint-free clothand alcohol.5Allow few minutes (depending on ambient temperature and humidity) for the alcohol to air drybefore powering on the device.13.7Cleaning Battery ContactsWhen and where to use: Perform this procedure to clean the battery connectors.Procedure:1Remove the main battery from device.2Dip the cotton portion of the cotton-tipped applicator in isopropyl alcohol.3Gently, rub the cotton portion of the cotton-tipped applicator back-and-forth across the contacts.Do not leave any cotton residue on the contacts.4Use the cotton-tipped applicator dipped in alcohol to remove any grease and dirt near thecontacts area.5Use a dry cotton-tipped applicator and repeat steps 4 and 5 at least three times.CAUTION: Do not point nozzle at yourself and others. Ensure that the nozzle or tube isaway from your face.6Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch awayfrom the surface.7Inspect the area for any grease or dirt, repeat if required.13.8TroubleshootingThis section lists common problems and solutions to fix the problems.Table 21: Troubleshooting the LEX Series DeviceProblem Cause SolutionAfter pressing thePower button, doesnot turn on.Battery iscompletelydischarged.Re-charge or replace the battery.MN005019A01-BChapter 13: Maintenance and Troubleshooting110
Problem Cause SolutionBattery notinstalledproperly.Install the battery properly. See Installing the Battery onpage 29.Power buttonnot helddown longenough.Press the Power button until the Motorola Solutions splashscreen is displayed.Device notresponding.Reset the device.After pressing thePower button, thedevice does notturn on but acharge battery iconAppears.Batterycharge levelis very low.Re-charge or replace the battery.After connectingthe device to a Ca-ble, a batterycharging icon Ap-pears.Battery is de-pleted but ischarging.Press and hold the Power button to turn on.When charging, theLED slowly blinksred.The device isat an ex-tremely low-power state.Charge the device for a few minutes. The LED changes toflashing green then press the Power button to turn on thedevice. If LED continuously blinks red, check power con-nections. Disconnect and reconnect connections.Battery did notcharge.Batteryfailed.Replace battery. If the device still does not operate, per-form a hardware reset.Device wasremovedfrom powerwhile batterywas charg-ing.Attach the device to in-box charger with in-box cable. TheLEX device typically charges the standard battery up to90% in about 1.5h in room temperature.NOTICE: Charge times vary by ambient temper-ature. You can achieve better charging time byusing the quick charger.Extreme bat-tery tempera-ture.Battery does not charge if ambient temperature is below 0°C (32 °F) or above 45 °C (113 °F).During data com-munication with ahost computer, nodata transmitted, ortransmitted datawas incomplete.Device re-moved fromUSB cable ordisconnectedfrom hostcomputerduring com-munication.Reattach the communication cable and re-transmit.Incorrect ca-ble configura-tion.Contact technical support.MN005019A01-BChapter 13: Maintenance and Troubleshooting 111
Problem Cause SolutionDuring data com-munication over Wi-Fi, no data trans-mitted, or transmit-ted data was in-complete.Wi-Fi radio isnot on.Turn on the Wi-Fi radio.You movedout of rangeof an accesspoint.Move closer to an access point.During data com-munication overBluetooth, no datatransmitted, ortransmitted datawas incomplete.Bluetooth ra-dio is not on.Turn on the Bluetooth radio.You movedout of rangeof anotherBluetooth de-vice.Move without 10 m (32.8 ft.) of the other device.During data com-munication overPublic / Private, nodata transmitted, ortransmitted datawas incomplete.You are in anarea of poorcellular serv-ice.Move into an area that has better service.VPN is notset up cor-rectly.Contact technical support for VPN setup information.SIM card notinstalledproperly.Remove and re-install the SIM cards.Data plan notactivated.Contact your service provider and ensure that your dataplan is enabled.No sound. Volume set-ting is low orturned off.Adjust the volume.Device turns off. Device is in-active.The display turns off after a period of inactivity. Set this pe-riod to 15 seconds, 30 seconds, 1, 2, 5, 10, or 30 minutes.Battery is de-pleted.Recharge or replace the battery.Extreme bat-tery tempera-ture.Move device to an area where the ambient temperature isbetween 0 °C (32 °F) and 45 °C (113 °F).A message ap-pears stating notenough storagememory.Too manyapplicationsinstalled onthe device.Remove user-installed applications on the device to recov-er memory. Swipe the home screen up from the arrowsign, and tap → Apps. Select the unused programsand tap Uninstall.Device cannot findany Bluetooth devi-ces nearby.Too far fromother Blue-tooth devi-ces.Move closer to the other Bluetooth device(s), within arange of 10 meters (32.8 feet).The Blue-tooth de-vice(s) near-Turn on the Bluetooth device(s) to find.MN005019A01-BChapter 13: Maintenance and Troubleshooting112
Problem Cause Solutionby are notturned on.The Blue-tooth de-vice(s) arenot in discov-erable mode.Set the Bluetooth device(s) to discoverable mode. If need-ed, refer to respective Bluetooth-enabled device (accesso-ry) user manual.The screen doesnot turn off whenyou hold the deviceclose to your faceduring a call.Dirty devicescreen im-pairs theproximitysensor read-ing.Clean the device screen with a piece of cloth, paying spe-cial attention to the proximity sensor area. For more infor-mation on cleaning the LEX display, see Cleaning LEX De-vice on page 109. To check the exact location of the prox-imity sensor on the LEX device, see Device Overview onpage 24.An application doesnot work, eventhough it did beforeyou switched theSIM cards.The settingsof your cur-rent SIM carddo not allowto use theapplication.Switch back to using the SIM card that allowed you to usethe application. For more information, contact your networkservice provider.Table 22: For LEX Devices with Dual SIMs (Private Network and Public Network)Problem Cause SolutionWhen the LEX device is in pri-vate mode:•Calls and messages fail tophone numbers in a publicnetwork, or• Calls and messages arenot received from phonenumbers in a public net-work.Interconnection is not imple-mented between private net-work and public network.If there is no connection be-tween private network andpublic network in your system,then the LEX needs to be inpublic mode to call and an-swer calls from a public net-work.NOTICE: Emergen-cy calling is availa-ble when the LEX isin private mode,based on emergen-cy settings in the pri-vate SIM card.When the LEX device is in pri-vate mode:•Calls and messages arenot received from phonenumbers in a public net-work.The caller might be using thepublic network phone numberfor the LEX.If there is no connection be-tween private network andpublic network in your system,the LEX needs to be in publicmode to answer calls to yourpublic network number and tocheck voice mails for yourpublic network phone number.If you prefer to keep the LEXin private mode, then you havethe option of providing yourprivate network phone numberMN005019A01-BChapter 13: Maintenance and Troubleshooting 113
Problem Cause Solutionto the caller, if allowed by yourorganization's policies.When the LEX device is in pri-vate mode:•Messages and voice mailsto your private networkphone number are not re-ceived.SMS and voicemail are not im-plemented in your private net-work.If SMS messages and voice-mail are only available on thepublic network, callers mustuse your public network phonenumber to leave messagesand voice mails. Also, the LEXmust be in private mode to ac-cess those messages andvoice mails.When the LEX device is inpublic mode:• Calls and messages fail tophone numbers in the pri-vate network, or• Calls and messages arenot received from phonenumbers in the private net-work.Interconnection is not imple-mented between private net-work and public network.If there is no connection be-tween private network andpublic network in your system,then the LEX must be in pri-vate mode to call, and to an-swer calls from, the privatenetwork.When the LEX device is inpublic mode:• Calls and messages arenot received from phonenumbers in the private net-work.The caller might be using theprivate network phone numberfor the LEX.If there is no connection be-tween private network andpublic network in your system,the LEX must be in privatemode to answer calls andmessages to your private net-work number and, if voice mailis enabled, to check voicemails for your private networkphone number. If you prefer tokeep the LEX in public mode,you have the option of provid-ing your public network phonenumber to the caller.13.9Backing up Contacts with AndroidTo back up contacts, the contacts must be exported to a .vcf file which must be copied to a securelocation.Procedure:1On the Apps screen, tap .2Tap the triple-bar menu in the upper-left corner of the screen.3Select Settings.4Select Export.5Tap the triple-bar menu and select the location where you want to export the file with contacts.MN005019A01-BChapter 13: Maintenance and Troubleshooting114
6In the text box, personalize the .vcf file name and tap .7Tap SAVE.Postrequisites: Complete the contacts backup by following steps in Backing Up LEX Data Manuallyon page 115.13.10Backing Up LEX Data ManuallyPrerequisites: Make sure you have a USB type C cable to connect the device to a computer.Procedure:1Connect the device to a computer by using the supplied USB-C cable.The first time you connect the LEX device to a computer, device driver software is installed onthe computer. When the Your device is ready to use message appears, you canproceed with the backup process.2From the Notifications panel on the device, tap the USB for... notification.3Tap Transfer files.4On the computer, click Start and select Computer.5Select the LEX L11 Portable Device.6Double-click Internal Shared Storage.7Navigate to the files that you want to back up.8Copy the files/folders to a secure location on your computer.13.11Syncing Data with GoogleProcedure:1Swipe the home screen up from the arrow sign.2On the Apps screen, select Settings .3Select Accounts.4Under the Accounts section, select the preferred email account.5Select the checkbox next to the application to be synced.If you want your data to be synced automatically, you can tap and select the check box nextto the Auto-sync data option.13.12Backing Up Your Data and Settings with Android BackupServiceYou can use the Android Backup Service to back up data connected to one or more of your GoogleAccounts. If you had to replace your device or erase its data, you can restore your data using anyaccount that you backed up.The following data and settings are backed up with the Android Backup Service:•Google Calendar settingsMN005019A01-BChapter 13: Maintenance and Troubleshooting 115
• Wi-Fi networks and passwords•Home screen wallpapers• Gmail settings• Applications installed through Google Play (backed up on the Play Store application)• Display settings (Brightness and Sleep)• Language and Input settings• Date and Time• Third-party application settings and data (varies by application)Procedure:1On the Apps screen, tap .2Tap Backup & reset.3Tap Back up my data and adjust the slider to the ON position.13.13Restoring Contact DataYou can restore the backed-up information to your device.NOTICE: For restoring other user data, see Accessing Files from a Computer on page 42.Procedure:1On the Apps screen, tap .2Tap the triple-bar menu in the upper-left corner of the screen.3Select Settings.4Select Import.5In the Import contacts from pop-up window, tap .vcf file.6In the folder that opens, select the .vcf file with contacts.13.14Restoring Your Data and SettingsYou can choose to restore application settings when you reinstall an application on your device. Thisfeature requires you to back up your data with your Google Account and that the application also usesthe Android Backup Service. Some apps may not back up and restore all data.Procedure:1From the Apps screen, tap Settings.2Select Backup & reset.3Set the slidebar next to Automatic restore to the ON position.If you cannot modify the position of the slidebar, you must enable backing up data with Androidbackup service first. See Backing Up Your Data and Settings with Android Backup Service onpage 115.MN005019A01-BChapter 13: Maintenance and Troubleshooting116
13.15Resetting the LEX DeviceYou can use this procedure to reset the LEX device if it does not operate properly.Procedure:1Power off and on the device and verify if the problem is gone.The device restarts. If the problem remains, perform step 2.CAUTION: To avoid erasing important data from your device, do not press any of thebuttons during power up.2Press the Power button and hold it for 10 seconds.The device restarts.3Remove the battery, reinsert it, and verify if the problem is gone.The device restarts. If the problem remains, contact technical support.MN005019A01-BChapter 13: Maintenance and Troubleshooting 117
Appendix ATechnical SpecificationsNOTICE: The specifications are subject to change.Table 23: Technical SpecificationsItem SpecificationPhysicalDimensions (H x W x D) With standard battery: 152.5 x 78 x 13.2 mm(6 x 3 x 0.5 in)With extended battery: 152.5 x 78 x 18.9 mm(6 x 3 x 0.7 in)Weight With standard battery: 260 g (9.8 oz)With extended battery: 310 g (10.9 Oz)Durability Continues to work after multiple drops on ev-ery face/edge/corner onto smooth concretefrom a height of 120 cm (48 in).Display Screen size and pixels: 5 in (720 x 1280)Brightness: 500 nitsTouch: capacitive touchpannel supportingmulti-touch, latex glovePhysical keys Volume up and volume down buttonPTT buttonEmergency buttonGroup rocker control (up/down)Power (on/off) buttonTwo programmable buttonsOperating temperature -20°C to +55°C (-4°F to 131°F)Storage temperature -46°C to +85°C (-50°F to 185°F)HardwareProcessor 2 x 4-core Qualcomm Kryo 260 CPU (1.8–2.2GHz)Chipset Qualcomm Snapdragon 660Memory 4 GB LPDDR4 SDRAM64 GB eMMCMN005019A01-BAppendix A: Technical Specifications118
Item SpecificationCamera Rear 13MP Camera with Auto FocusFront 8MP Camera with Fixed FocusFlash Rear camera LED Flash with torchlight func-tionalitySensors Ambient Light SensorFingerprint SensorBarometric Pressure SensorProximity/Gesture SensorAccelerometer SensorMagnetometer SensorGyroPorts 3.5 mm Audio Jack (stereo)Two nano SIM slotsOne microSD slot (microSD, microSDHC, mi-croSDXC, with capacity up to 400 GB)USB Type-CBattery Standard – 2500 mAh (nominal voltage of3.7V)High capacity – 5000 mAh (nominal voltageof 3.7V)Microphone Three microphones (primary, secondary, andtertiary) with noise and echo cancellation.SoftwareOperating System Android Nougat 7.1Google, Google Play, Android, and othermarks are trademarks of Google Inc.Messaging SMS/MMSE-mailWeb HTML5/WAP 2.0 compliant AOSP WebKitbrowser, Chrome browserWide Area NetworksStandards FDD-LTE/TDD-LTE/GSM/UMTS/HSPA+LTE release Includes LTE 3GPP Release 11 features,Category 9 CapableLTE bands Europe, the Middle East and Africa (EMEA)LEX L11e: 1, 3, 7, 8, 20, 38, 39, 40, includingFDD-TDD mobilityAsia-Pacific, Latin America (APAC-LA)LEX L11a: 1, 2, 3, 4, 5, 7, 8, 28MN005019A01-BAppendix A: Technical Specifications 119
Item SpecificationNOTICE: Bands 2 and 4 are speci-fied as roaming for the US.North America (NA), US AT&T/Firstnet/VerizonLEX L11n: 2, 4, 5, 7, 12, 14, 29, 30, 66, 13, 17, 25, 26, 412CA DLGSM bands 850 MHz, 900 MHz, 1800 MHz, 1900 MHz3G/3.5G bands UMTS/HSPA+: 1, 2, 4, 5, 8Wi-FiOperating band 2.4 GHz, 5 GHzStandards IEEE Std 802.11-2012 a/b/g/n/ac/k/r with hot-spot functionality (up to 32 connections)Personal Area NetworksBluetooth BT 4.2 LE (Low Energy) + BR/EDRProfiles:Advanced Audio Distribution Profile (A2DP)Hands Free Profile (HFP)Headset Profile (HSP)Human Interface Device Profile (HID)Serial Port Profile (SPP)Generic Access Profile (GAP)Service Discovery Application Profile (SDAP)Dial-up Networking Profile (DUN)Generic Object Exchange Profile (GOEP)Object Push Profile (OPP)Generic Audio/Video Distribution Profile(GAVDP)Message Access Profile (MAP)Audio/Video Remote Control Profile (AVRCP)Phone Book Access Profile (PBAP)File Transfer Profile (FTP)Personal Area Networking Profile (PAN)Proximity Profile (PXP)Health Device Profile (HDP)SIM Access Profile (SAP)Generic Attribute (GATT) and attribute proto-col (ATT)NFC Supports the following NFC modes of opera-tion:Reader/Writer modePeer-to-Peer modeCard Emulation modeUICC SE is supported for card emulationmode.MN005019A01-BAppendix A: Technical Specifications120
Item SpecificationGPSLocation services Standalone GPSAssisted GPS (aGPS)GLONASSDevice ManagementRemote management and configuration Supports AirWatch DMVideo and ImagingSupported formats MPEG-4 (.mp4)JPGPNGGIFBMPH.264H.263NOTICE: Video and images are time stamped for evidence documentation.AudioSupported formats MP3 (.mp3)AMRAMR-NBAMR-WBAAC/AAC+/eAACLPCMOutput Dual Front Facing Speakers up to 1.6W3.5 mm 4 pole Audio Jack (stereo) connectorsupporting:COTS 3.5 mm HeadsetCOTS 3.5 mm Headset with MicrophoneCOTS 3.5 Headset with Microphone andSend/End buttonMotorola Solutions 3.5 mm Mono Headsetwith Microphone and PTT buttonBluetooth power Class 2 – output power 2.5mW (4 dBm)Bluetooth Power Class 1.5 – output power10mW (10dBm)BLE 4&5 - output power 1mW (0dBm)Input Three noise and echo cancelling micro-phonesAccessoriesMN005019A01-BAppendix A: Technical Specifications 121
Item SpecificationIn-box accessories Either standard battery or high capacity bat-tery with the appropriate battery coverUSB-A to USB-C data/power cableRegion-specific wall chargerQuick Start GuideRegulatory/Safety GuideMN005019A01-BAppendix A: Technical Specifications122

Navigation menu