Motorola Solutions 89FT7078 Smart phone User Manual LEX L10ig Mission Critical Handheld User Guide

Motorola Solutions, Inc. Smart phone LEX L10ig Mission Critical Handheld User Guide

Users Manual LEX-L10IG

LEX L10ig MissionCritical Handheld UserGuideMN002859A01-AMARCH 2016© 2016 Motorola Solutions, Inc. All rights reserved
CopyrightsThe Motorola products described in this document may include copyrighted Motorola computerprograms. Laws in the United States and other countries preserve for Motorola certain exclusive rightsfor copyrighted computer programs. Accordingly, any copyrighted Motorola computer programscontained in the Motorola products described in this document may not be copied or reproduced in anymanner without the express written permission of Motorola.© 2016 Motorola Solutions, Inc. All Rights ReservedNo part of this document may be reproduced, transmitted, stored in a retrieval system, or translatedinto any language or computer language, in any form or by any means, without the prior writtenpermission of Motorola Solutions, Inc.Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or byimplication, estoppel or otherwise, any license under the copyrights, patents or patent applications ofMotorola, except for the normal non-exclusive, royalty-free license to use that arises by operation oflaw in the sale of a product.DisclaimerPlease note that certain features, facilities, and capabilities described in this document may not beapplicable to or licensed for use on a particular system, or may be dependent upon the characteristicsof a particular mobile subscriber unit or configuration of certain parameters. Please refer to yourMotorola contact for further information.TrademarksMOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks orregistered trademarks of Motorola Trademark Holdings, LLC and are used under license. All othertrademarks are the property of their respective owners.European Union (EU) Waste of Electrical and Electronic Equipment (WEEE)directiveThe European Union's WEEE directive requires that products sold into EU countries must have thecrossed out trash bin label on the product (or the package in some cases).As defined by the WEEE directive, this cross-out trash bin label means that customers and end-usersin EU countries should not dispose of electronic and electrical equipment or accessories in householdwaste.Customers or end-users in EU countries should contact their local equipment supplier representative orservice centre for information about the waste collection system in their country.MN002859A01-ACopyrightsSend Feedback 3
This page intentionally left blank.
Contact UsMotorola Solution Support CenterThe Solution Support Center (SSC) is the primary Motorola Solutions support contact. Call:• Before any software reload.• To confirm troubleshooting results and analysis before removing and replacing a Field ReplaceableUnit (FRU) and Field Replaceable Entity (FRE) to repair the system.For... PhoneUnited States Calls 800-221-7144International Calls 302-444-9800North America Parts OrganizationFor assistance in ordering replacement parts or identifying a part number, contact the Motorola Partsorganization. Your first response when troubleshooting your system is to call the Motorola SSC.For... PhonePhone Orders 800-422-4210 (US and Canada Orders)For help identifying an item or part number, selectchoice 3 from the menu.302-444-9842 (International Orders)Includes help for identifying an item or part number andfor translation as needed.Fax Orders 800-622-6210 (US and Canada Orders)CommentsSend questions and comments regarding user documentation to documentation@motorolasolutions.com.Provide the following information when reporting a documentation error:• The document title and part number• The page number with the error• A description of the errorWe welcome your feedback on this and other Motorola manuals. To take a short, confidential surveyon Motorola Customer Documentation, go to docsurvey.motorolasolutions.com or scan the followingQR code with your mobile device to access the survey.MN002859A01-AContact UsSend Feedback 5
This page intentionally left blank.
Document HistoryVersion Description DateMN002859A01-AInitial release of the LEX L10ig Mission CriticalHandheld Service Provisioning Guide.March 2016MN002859A01-ADocument HistorySend Feedback 7
This page intentionally left blank.
ContentsCopyrights................................................................................................................... 3Contact Us................................................................................................................... 5Document History....................................................................................................... 7List of Figures............................................................................................................15List of Tables.............................................................................................................19List of Processes...................................................................................................... 21List of Procedures.....................................................................................................23Chapter 1: About this Guide.....................................................................................27Contact Us...................................................................................................................................27Versions.......................................................................................................................................28Operating System Version................................................................................................ 28Software Build Number..................................................................................................... 28Kernel Version..................................................................................................................28Chapter Descriptions................................................................................................................... 28Helpful Background Information..................................................................................................29Notational Conventions................................................................................................................29Icon Conventions......................................................................................................................... 29Regulatory Information................................................................................................................ 30Service Information......................................................................................................................30Documentation Set...................................................................................................................... 31Chapter 2: Getting Started .......................................................................................33Features.......................................................................................................................................33Unpacking....................................................................................................................................35Setting Up the LEX L10ig............................................................................................................ 35Removing the Screen Protective Film...............................................................................36Removing the Battery Cover.............................................................................................36Installing a microSD or CRYPTR micro Encryption Card................................................. 37Removing the microSD or CRYPTR Card........................................................................ 37Installing the Public and Private SIM Cards......................................................................38Removing the Public and Private SIM Cards....................................................................38Installing the Battery......................................................................................................... 39Removing the Battery....................................................................................................... 39Charging the LEX L10ig...............................................................................................................40Charging Temperature......................................................................................................40Battery Charge Indications................................................................................................40MN002859A01-AContentsSend Feedback 9
Battery Management.........................................................................................................42Monitor Battery Usage........................................................................................... 42Low Battery Notification......................................................................................... 43Battery Optimization...............................................................................................43Powering On the LEX L10ig for the First Time............................................................................ 45Powering Off the LEX L10ig........................................................................................................ 45Entering and Exiting the Suspend Mode..................................................................................... 46Setting Time Out to Enter Suspend Mode........................................................................ 46Covert Mode................................................................................................................................ 46Turning On Covert Mode.................................................................................................. 47Turning Off Covert Mode.................................................................................................. 47Locking the LEX L10ig.................................................................................................................48Selecting a Locking Option............................................................................................... 48Specifying a Pattern............................................................................................... 49Specifying a PIN or Password................................................................................49Setting the Timeout for Locking the LEX L10ig......................................................49Unlocking the LEX L10ig...................................................................................................50Unlocking the LEX L10ig Using a Pattern.............................................................. 50Unlocking the LEX L10ig Using a PIN or Password...............................................50Calling Emergency from a Locked LEX L10ig.................................................................. 51Setting the Date and Time........................................................................................................... 51Setting the Display.......................................................................................................................51Setting Screen Brightness................................................................................................ 52Setting Screen Rotation.................................................................................................... 52Setting Up Sleep Mode..................................................................................................... 52Setting Up Daydream........................................................................................................53Setting the Font Size.........................................................................................................53Enabling Cast Screen....................................................................................................... 54Projecting the LEX L10ig Screen on Another Device.............................................54General Sound Setting................................................................................................................ 54Public and Private Carrier Modes................................................................................................56Switching Modes Using the Power Button........................................................................ 56Switching Modes Using the Settings App......................................................................... 57LEX L10ig Emergency Button......................................................................................................58Chapter 3: Using the LEX L10ig...............................................................................59Using the Touchscreen................................................................................................................59Using the On-Screen Keyboard...................................................................................................60Android Keyboard Settings............................................................................................... 61Motorola Solutions Home Experience (MHx)...............................................................................62MN002859A01-AContents10 Send Feedback
LEX L10ig Home Screen.................................................................................................. 62Home Screen Overlay............................................................................................63Customizing the Home Screen......................................................................................... 63Adding Widgets...................................................................................................... 63Moving Widgets......................................................................................................69Removing Widgets................................................................................................. 69Example of a Customized Home Screen Panel..................................................... 70Status Bar....................................................................................................................................70Notification Icons......................................................................................................................... 71LEX L10ig Status Icons............................................................................................................... 72Managing Notifications................................................................................................................ 73Working with Status..................................................................................................................... 74Quick Settings..............................................................................................................................75Applications................................................................................................................................. 76Folders.........................................................................................................................................78Creating a Folder.............................................................................................................. 78Naming Folders.................................................................................................................78Removing a Folder............................................................................................................78Accessing Files from a Computer................................................................................................79Chapter 4: Calling......................................................................................................81Making a Call Using the Dialer.................................................................................................... 82Making a Call Using People List Contacts...................................................................................84Making a Call Using Call History................................................................................................. 85Making a Conference Call........................................................................................................... 86Answering Calls with a Bluetooth Headset.................................................................................. 89Call Settings.................................................................................................................................89Requesting an Emergency Alert.................................................................................................. 90Chapter 5: Radio Services........................................................................................93Pairing LEX L10ig with Bluetooth Accessory...............................................................................93Unpairing LEX L10ig from Bluetooth Accessory..........................................................................95Chapter 6: Messaging...............................................................................................97Sending a Text Message............................................................................................................. 97Sending a Multimedia Message...................................................................................................98Chapter 7: Applications..........................................................................................101Using File Browser.....................................................................................................................101Managing People Contacts........................................................................................................102Adding People.................................................................................................................102Editing People.................................................................................................................102Deleting People...............................................................................................................103MN002859A01-AContentsSend Feedback 11
Camera...................................................................................................................................... 103Taking Photos................................................................................................................. 104Taking a Panoramic Photo..............................................................................................106Recording Videos............................................................................................................107Camera Settings............................................................................................................. 108Video Settings.................................................................................................................110Gallery....................................................................................................................................... 111Working with Albums...................................................................................................... 112Sharing an Album.................................................................................................113Getting Album Information................................................................................... 113Deleting an Album................................................................................................114Working with Photos....................................................................................................... 114Viewing and Browsing Photos..............................................................................114Rotating a Photo.................................................................................................. 115Cropping a Photo................................................................................................. 116Setting a Photo as a Contact Icon........................................................................116Sharing a Photo................................................................................................... 117Deleting a Photo...................................................................................................117Working with Videos....................................................................................................... 117Watching a Video................................................................................................. 117Sharing a Video....................................................................................................118Deleting a Video...................................................................................................118Using Sound Recorder.............................................................................................................. 119Voice Dialer............................................................................................................................... 121Calling a Person by Name.............................................................................................. 121Redialing a Previous Call................................................................................................121Dialing by Number.......................................................................................................... 122Opening an Application...................................................................................................122Chapter 8: Wireless.................................................................................................123Wireless Wide Area Networks................................................................................................... 123Sharing the Mobile Data Connection.............................................................................. 123Configuring USB Tethering.................................................................................. 123Configuring Bluetooth Tethering.......................................................................... 124Configuring Portable Wi-Fi Hotspot Settings........................................................125Data Usage.....................................................................................................................126Setting Data Usage Warning................................................................................127Setting Auto-Sync................................................................................................ 127Disabling Data When Roaming.......................................................................................127Limiting Data Connection to a Network...........................................................................128MN002859A01-AContents12 Send Feedback
Editing the Access Point Name.......................................................................................128Adding a Virtual Private Network (VPN)......................................................................... 128Cell Broadcasts...............................................................................................................129Wireless Local Area Networks...................................................................................................130Scanning and Connecting to a Wi-Fi Network................................................................ 130Configuring a Wi-Fi Network........................................................................................... 132Adding a Wi-Fi Network.................................................................................................. 133Manually Adding a Wi-Fi Network...................................................................................133Advanced Wi-Fi Settings.................................................................................................134WLAN Configuration....................................................................................................... 135Modifying a Wi-Fi Network.............................................................................................. 135Removing a Wi-Fi Network............................................................................................. 135Bluetooth Device........................................................................................................................136Adaptive Frequency Hopping..........................................................................................136Bluetooth Security...........................................................................................................136Bluetooth Profiles............................................................................................................137Bluetooth Power States.................................................................................................. 137Bluetooth Radio Power for Android.................................................................................138Enabling Bluetooth............................................................................................... 138Disabling Bluetooth.............................................................................................. 138Changing the Bluetooth Name........................................................................................138Selecting Profiles on a Bluetooth Device........................................................................ 139Chapter 9: ADB and USB Driver Setup................................................................. 141Required Software and Hardware............................................................................................. 141Installing USB Driver and ADB.................................................................................................. 141Chapter 10: Accessories........................................................................................ 147Accessories............................................................................................................................... 147USB Cable................................................................................................................................. 147Desktop Cradle.......................................................................................................................... 148Vehicle Cradle........................................................................................................................... 148Holster....................................................................................................................................... 149Chapter 11: Maintenance and Troubleshooting...................................................151Maintaining the LEX L10ig.........................................................................................................151Battery Safety Guidelines.......................................................................................................... 151Cleaning Guidelines...................................................................................................................152Cleaning the LEX L10ig............................................................................................................. 153Cleaning the Interface Connector.............................................................................................. 153Cleaning the Battery Contacts................................................................................................... 153Troubleshooting ........................................................................................................................ 154MN002859A01-AContentsSend Feedback 13
Backing Up the LEX L10ig.........................................................................................................156Backing up Contacts....................................................................................................... 157Resetting the LEX L10ig............................................................................................................ 159Performing Factory Data Reset...................................................................................... 159Chapter 12: Technical Specifications................................................................... 161MN002859A01-AContents14 Send Feedback
List of FiguresFigure 1: Manufacturing Label................................................................................................................30Figure 2: LEX L10ig Features.................................................................................................................33Figure 3: Removing the Screen Protective Film..................................................................................... 36Figure 4: Removing the Battery Cover................................................................................................... 36Figure 5: Installing the microSD or CRYPTR micro Encryption Card.....................................................37Figure 6: Installing the Public and Private SIM Cards............................................................................ 38Figure 7: Installing the Battery................................................................................................................39Figure 8: Charging the LEX L10ig.......................................................................................................... 40Figure 9: Charge and Notification LED...................................................................................................41Figure 10: Battery Screen.......................................................................................................................42Figure 11: Low Battery Notification.........................................................................................................43Figure 12: Battery Depleted Screen....................................................................................................... 43Figure 13: Quick Settings Menu — Airplane Mode................................................................................ 44Figure 14: LEX L10ig Boot Screen......................................................................................................... 45Figure 15: Selecting Power Off...............................................................................................................45Figure 16: Power Button Menu...............................................................................................................47Figure 17: Power Button Menu...............................................................................................................48Figure 18: Sound Screen........................................................................................................................55Figure 19: Volume Button.......................................................................................................................55Figure 20: Service Switch.......................................................................................................................57Figure 21: Switch Networks Confirmation Popup...................................................................................57Figure 22: Switch Networks Confirmation Popup...................................................................................58Figure 23: Android Keyboard Settings....................................................................................................60Figure 24: Default Home Screen............................................................................................................ 62Figure 25: Widgets Screen.....................................................................................................................64Figure 26: Example of a Widget Added to New Panel........................................................................... 65Figure 27: Empty My Apps Widget......................................................................................................... 66Figure 28: List of Shortcuts for My Apps Widgets.................................................................................. 67Figure 29: My Apps Widget with Shortcuts Added................................................................................. 68Figure 30: My Status Widget.................................................................................................................. 68Figure 31: Status Selection.................................................................................................................... 68Figure 32: Example of a Customized Home Screen Panel.................................................................... 70Figure 33: Status Bar..............................................................................................................................70Figure 34: Notification Panel.................................................................................................................. 74Figure 35: Quick Settings Panel............................................................................................................. 75Figure 36: Opened Unnamed Folder......................................................................................................78MN002859A01-AList of FiguresSend Feedback 15
Figure 37: Named Folder........................................................................................................................78Figure 38: Notifications Screen.............................................................................................................. 79Figure 39: MTP / PTP Selection Screen.................................................................................................80Figure 40: Insert Wired Headset Plug.................................................................................................... 82Figure 41: Dialer Screen.........................................................................................................................83Figure 42: Call in Progress..................................................................................................................... 84Figure 43: People List Contact............................................................................................................... 85Figure 44: Call History Tab.....................................................................................................................86Figure 45: Two Calls...............................................................................................................................87Figure 46: Two Calls Connected............................................................................................................ 88Figure 47: Merged Calls......................................................................................................................... 88Figure 48: Emergency Alert Activation Popup........................................................................................91Figure 49: Bluetooth Pairing Screen.......................................................................................................94Figure 50: Bluetooth Device Screen.......................................................................................................94Figure 51: Bluetooth Paired Devices Screen..........................................................................................95Figure 52: Bluetooth Paired Devices...................................................................................................... 96Figure 53: Unpair Complete................................................................................................................... 96Figure 54: New Message Screen........................................................................................................... 97Figure 55: New Multimedia Message Screen.........................................................................................98Figure 56: File Browser Screen............................................................................................................ 101Figure 57: Camera Photo Screen.........................................................................................................104Figure 58: Camera Screen................................................................................................................... 105Figure 59: Camera Option Bar............................................................................................................. 105Figure 60: Camera Zoom..................................................................................................................... 106Figure 61: Panoramic Mode................................................................................................................. 106Figure 62: Panoramic Frame................................................................................................................107Figure 63: Video Mode......................................................................................................................... 107Figure 64: Camera Settings..................................................................................................................108Figure 65: First More Options Screen.................................................................................................. 109Figure 66: Second More Options Screen............................................................................................. 109Figure 67: Third More Options Screen................................................................................................. 110Figure 68: Video Settings..................................................................................................................... 110Figure 69: First More Options Video Screen........................................................................................ 111Figure 70: Second More Options Video Screen................................................................................... 111Figure 71: Gallery — Albums............................................................................................................... 112Figure 72: Photos/Videos Inside an Album.......................................................................................... 113Figure 73: Photo Example.................................................................................................................... 115Figure 74: Cropping Grid......................................................................................................................116Figure 75: Video Playback Controls..................................................................................................... 118MN002859A01-AList of Figures16 Send Feedback
Figure 76: Start Recording................................................................................................................... 119Figure 77: Record Your Message.........................................................................................................120Figure 78: Finish Recording................................................................................................................. 120Figure 79: Voice Dialer Window........................................................................................................... 121Figure 80: USB Cable Connection to Host Computer.......................................................................... 124Figure 81: Set up Wi-Fi Hotspot Dialog Box.........................................................................................126Figure 82: Settings Screen...................................................................................................................131Figure 83: Wi-Fi Screen........................................................................................................................131Figure 84: WLAN Network Security Dialog Boxes................................................................................132Figure 85: Access Computer................................................................................................................ 141Figure 86: Access CD...........................................................................................................................142Figure 87: Select Destination............................................................................................................... 142Figure 88: Access Device Manager......................................................................................................143Figure 89: Select Update Drive Software............................................................................................. 143Figure 90: Select Browse my computer for driver software..................................................................144Figure 91: Select Installation Folder..................................................................................................... 144Figure 92: Select Install this driver software anyway............................................................................145Figure 93: Close the Installation........................................................................................................... 145Figure 94: USB Cable...........................................................................................................................147Figure 95: Desktop Cradle....................................................................................................................148Figure 96: Vehicle Cradle.....................................................................................................................148Figure 97: Holster.................................................................................................................................149Figure 98: Contacts Menu.................................................................................................................... 157Figure 99: Import/Export Contacts Popup............................................................................................ 158Figure 100: Export Confirmation Popup............................................................................................... 158MN002859A01-AList of FiguresSend Feedback 17
This page intentionally left blank.
List of TablesTable 1: LEX L10ig Features..................................................................................................................33Table 2: Charge and Notification LED — Charging Indications..............................................................41Table 3: Using the Touchscreen.............................................................................................................59Table 4: Android Keyboard Settings.......................................................................................................61Table 5: Notification Icons...................................................................................................................... 71Table 6: Status Icons..............................................................................................................................72Table 7: Applications.............................................................................................................................. 76Table 8: Camera Icons and Actions..................................................................................................... 104Table 9: Troubleshooting the LEX L10ig.............................................................................................. 154Table 10: Technical Specifications....................................................................................................... 161Table 11: General Accessories............................................................................................................ 163MN002859A01-AList of TablesSend Feedback 19
This page intentionally left blank.
List of ProcessesMN002859A01-AList of ProcessesSend Feedback 21
This page intentionally left blank.
List of ProceduresRemoving the Battery Cover ................................................................................................................. 36Installing a microSD or CRYPTR micro Encryption Card ...................................................................... 37Removing the microSD or CRYPTR Card .............................................................................................37Installing the Public and Private SIM Cards .......................................................................................... 38Removing the Public and Private SIM Cards ........................................................................................ 38Installing the Battery ..............................................................................................................................39Removing the Battery ............................................................................................................................ 39Turning Off the Radio ............................................................................................................................ 44Powering Off the LEX L10ig .................................................................................................................. 45Entering and Exiting the Suspend Mode ............................................................................................... 46Setting Time Out to Enter Suspend Mode .............................................................................................46Turning On Covert Mode ....................................................................................................................... 47Turning Off Covert Mode .......................................................................................................................47Selecting a Locking Option ....................................................................................................................48Specifying a Pattern .............................................................................................................................. 49Specifying a PIN or Password ............................................................................................................... 49Setting the Timeout for Locking the LEX L10ig ..................................................................................... 49Unlocking the LEX L10ig Using a Pattern ............................................................................................. 50Unlocking the LEX L10ig Using a PIN or Password .............................................................................. 50Calling Emergency from a Locked LEX L10ig ....................................................................................... 51Setting the Date and Time .....................................................................................................................51Setting Screen Brightness ..................................................................................................................... 52Setting Screen Rotation .........................................................................................................................52Setting Up Sleep Mode ..........................................................................................................................52Setting Up Daydream ............................................................................................................................ 53Setting the Font Size ............................................................................................................................. 53Enabling Cast Screen ............................................................................................................................54Projecting the LEX L10ig Screen on Another Device ............................................................................ 54Switching Modes Using the Power Button .............................................................................................56Switching Modes Using the Settings App ..............................................................................................57Adding Widgets ..................................................................................................................................... 63Adding Shortcuts to the My Apps Widget .............................................................................................. 65Changing My Status .............................................................................................................................. 68Moving Widgets ..................................................................................................................................... 69Removing Widgets ................................................................................................................................ 69Creating a Folder ...................................................................................................................................78MN002859A01-AList of ProceduresSend Feedback 23
Naming Folders ..................................................................................................................................... 78Removing a Folder ................................................................................................................................ 78Accessing Files from a Computer ..........................................................................................................79Making a Call Using the Dialer .............................................................................................................. 82Making a Call Using People List Contacts .............................................................................................84Making a Call Using Call History ........................................................................................................... 85Making a Conference Call ..................................................................................................................... 86Requesting an Emergency Alert ............................................................................................................90Pairing LEX L10ig with Bluetooth Accessory .........................................................................................93Unpairing LEX L10ig from Bluetooth Accessory ....................................................................................95Sending a Text Message .......................................................................................................................97Sending a Multimedia Message ............................................................................................................ 98Adding People ..................................................................................................................................... 102Editing People ..................................................................................................................................... 102Deleting People ................................................................................................................................... 103Taking Photos ......................................................................................................................................104Taking a Panoramic Photo .................................................................................................................. 106Recording Videos ................................................................................................................................ 107Sharing an Album ................................................................................................................................ 113Getting Album Information ...................................................................................................................113Deleting an Album ............................................................................................................................... 114Viewing and Browsing Photos ............................................................................................................. 114Rotating a Photo ..................................................................................................................................115Cropping a Photo .................................................................................................................................116Setting a Photo as a Contact Icon ....................................................................................................... 116Sharing a Photo ...................................................................................................................................117Deleting a Photo .................................................................................................................................. 117Watching a Video ................................................................................................................................ 117Sharing a Video ................................................................................................................................... 118Deleting a Video .................................................................................................................................. 118Calling a Person by Name ...................................................................................................................121Redialing a Previous Call .................................................................................................................... 121Dialing by Number ............................................................................................................................... 122Opening an Application ....................................................................................................................... 122Configuring USB Tethering ..................................................................................................................123Configuring Bluetooth Tethering ..........................................................................................................124Configuring Portable Wi-Fi Hotspot Settings ....................................................................................... 125Configuring the Wi-Fi Hotspot ............................................................................................................. 125Setting Data Usage Warning ............................................................................................................... 127MN002859A01-AList of Procedures24 Send Feedback
Setting Auto-Sync ................................................................................................................................127Disabling Data When Roaming ........................................................................................................... 127Limiting Data Connection to a Network ............................................................................................... 128Editing the Access Point Name ........................................................................................................... 128Adding a Virtual Private Network (VPN) .............................................................................................. 128Cell Broadcasts ................................................................................................................................... 129Scanning and Connecting to a Wi-Fi Network .....................................................................................130Configuring a Wi-Fi Network ................................................................................................................132Adding a Wi-Fi Network .......................................................................................................................133Manually Adding a Wi-Fi Network ....................................................................................................... 133Modifying a Wi-Fi Network ...................................................................................................................135Removing a Wi-Fi Network ..................................................................................................................135Enabling Bluetooth .............................................................................................................................. 138Disabling Bluetooth ..............................................................................................................................138Changing the Bluetooth Name ............................................................................................................ 138Selecting Profiles on a Bluetooth Device .............................................................................................139Installing USB Driver and ADB ............................................................................................................ 141Cleaning the Interface Connector ........................................................................................................153Cleaning the Battery Contacts .............................................................................................................153Backing Up the LEX L10ig ...................................................................................................................156Backing up Contacts ............................................................................................................................157Resetting the LEX L10ig ......................................................................................................................159Performing Factory Data Reset ........................................................................................................... 159MN002859A01-AList of ProceduresSend Feedback 25
This page intentionally left blank.
Chapter 1About this GuideThis guide provides information about using the LEX L10ig Mission Critical Handheld and accessories.NOTICE: Screens and menu options may be changed or customized by your agency to showdifferent information.Contact UsThe Solution Support Center (SSC) is the primary Motorola Solutions support contact.Motorola Solution Support CenterCall the SSC:• Before any software reload.• To confirm troubleshooting results and analysis before removing and replacing a Field ReplaceableUnit (FRU) and Field Replaceable Entity (FRE) to repair the system.For... PhoneUnited States Calls 800-221-7144International Calls 302-444-9800North America Parts OrganizationFor assistance in ordering replacement parts or identifying a part number, contact the Motorola Partsorganization. Your first response when troubleshooting your system is to call the Motorola SSC.For... PhonePhone Orders 800-422-4210 (US and Canada Orders)For help identifying an item or part number, selectchoice 3 from the menu.302-444-9842 (International Orders)Includes help for identifying an item or part number andfor translation as needed.Fax Orders 800-622-6210 (US and Canada Orders)CommentsSend questions and comments regarding user documentation to documentation@motorolasolutions.com.Provide the following information when reporting a documentation error:• The document title and part number• The page number with the error• A description of the errorMN002859A01-AAbout this GuideSend Feedback 27
We welcome your feedback on this and other Motorola manuals. To take a short, confidential surveyon Motorola Customer Documentation, go to docsurvey.motorolasolutions.com or scan the followingQR code with your mobile device to access the survey.VersionsThis guide covers various software configurations and references are made to operating system orsoftware versions discussed in the following three subsections.Operating System VersionThe Operating System for the LEX L10ig is the Android Operating System.To determine the Operating System version, from the Home screen touch → → About phone→ Android Version. The last line provides the Android version information. For example: 4.4.4.Software Build NumberThis topic has information on how to find the software build number of your LEX L10ig.To determine the software build number, from the Home screen touch → → About phone →Build Number.Kernel VersionThe Kernel version can be found in the Settings application.To determine the kernel version, from the Home screen, touch → → About phone → Kernelversion.Chapter DescriptionsThis guide provides information on the features listed in the chapter descriptions below:•About this Guide on page 27 Chapter 1, presents contacts and general information related to thisproduct.•Getting Started on page 33 Chapter 2, explains getting the LEX L10ig up and running for the firsttime.•Using the LEX L10ig on page 59 Chapter 3, is a reference to operating the LEX L10ig.•Calling on page 81 Chapter 4, is a reference to making and receiving calls.•Radio Services on page 93 Chapter 5, is a reference to connecting the LEX L10ig to a LandMobile Radio for communicating on LTE and P25 systems.•Messaging on page 97 Chapter 6, is a reference to sending text and multimedia messages.•Applications on page 101 Chapter 7, explains using basic applications installed on the LEX L10igsuch as Camera, People, and File Browser.MN002859A01-AChapter 1: About this Guide28 Send Feedback
•Wireless on page 123 Chapter 8, explains configuring the LEX L10ig to operate on a personal,local, and wide area wireless network.•ADB and USB Driver Setup on page 141 Chapter 9, is a reference to setting up the Android DebugBridge (ADB) and USB driver for your Windows PC.•Accessories on page 147 Chapter 10, is a reference to available accessories and how to use themwith the LEX L10ig.•Maintenance and Troubleshooting on page 151 Chapter 11, is a reference to cleaning and storingthe LEX L10ig, and troubleshooting solutions for potential problems.•Technical Specifications on page 161 Chapter 12, provides technical specifications for the LEXL10ig.Helpful Background InformationMotorola Solutions offers various courses designed to assist in learning about the system.For information, go to http://www.motorolasolutions.com/training to view the current course offeringsand technology paths.Notational ConventionsThe following conventions are used in this document:Italics are used to highlight the following:• Icons on a screen• Chapters and sections in this and related documentsBold text is used to highlight the following:• Dialog box, window, and screen names• Drop-down list and list box names• Check box and radio button names• Key names on a keypad• Button names on a screenBullets (•) indicate:• Action items• Lists of alternatives• Lists of required steps that are not necessarily sequentialSequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.Icon ConventionsThe documentation set is designed to give the reader more visual clues.The following graphic icons are used throughout the documentation set. These icons and theirassociated meanings are described below.WARNING: The word WARNING with the associated safety icon implies information that, ifdisregarded, could result in death or serious injury, or serious product damage.CAUTION: The word CAUTION with the associated safety icon implies information that, ifdisregarded, may result in minor or moderate injury, or serious product damage.MN002859A01-AChapter 1: About this GuideSend Feedback 29
NOTICE: NOTICE contains information more important than the surrounding text, such asexceptions or preconditions. They also refer the reader elsewhere for additional information,remind the reader how to complete an action (when it is not part of the current procedure, forinstance), or tell the reader where something is located on the screen. There is no warning levelassociated with a note.Regulatory InformationBEFORE USING THIS device, READ the Product Regulatory, Safety & RF Exposure Guide (PNMN001458A01-A) included with this package.Service InformationIf you have a problem with your equipment, contact Motorola Solutions Global Customer SupportCenter for your region.Contact information is available at: http://www.motorolasolutions.com/support. You can also call1-800-323-9949 for support and select option 6 for PS LTE infrastructure and devices. Whencontacting support, have the following information available:• Serial number of the unit (found on manufacturing label)• Model number or product name (found on manufacturing label)• Software type and version numberFigure 1: Manufacturing LabelMotorola Solutions responds to calls by e-mail, telephone or fax within the time limits set forth insupport agreements.If your problem cannot be solved by Motorola Solutions Global Customer Support Center, you mayneed to return your equipment for servicing and will be given specific directions. Motorola Solutions isnot responsible for any damages incurred during shipment if the approved shipping container is notMN002859A01-AChapter 1: About this Guide30 Send Feedback
used. Shipping the units improperly can possibly void the warranty. Remove the CRYPTR card ormicroSD card and SIM card before shipping.If you purchased your product from a Motorola Solutions business partner, contact that businesspartner for support.Documentation SetThe documentation set for the LEX L10ig provides information for specific user needs.Unless otherwise specified, Motorola Solutions documents listed here are available from MotorolaOnline at https://businessonline.motorolasolutions.com. If you are new to Motorola Online, follow theon-screen instructions to sign up for an account. To access Public Safety LTE infrastructure and devicemanuals, select Resource Center → Product Information → Manuals → Network Infrastructure.The documentation set for the LEX L10ig includes:•LEX L10ig Quick Start Guide PN MN002346A01-B describes how to get the LEX L10ig up andrunning.•LEX L10ig Mission Critical Handheld User Guide (this guide) MN002859A01-A describes how touse the LEX L10ig.•LEX L10ig Regulatory and Safety Guide PN MN002351A01-B describes how to safely use the LEXL10ig.•LEX L10ig Service Provisioning Guide PN MN002861A01-A provides technical instructions on howto activate, provision, and configure the LEX L10ig.For the latest version of this guide and all guides, go to: https://businessonline.motorolasolutions.com.MN002859A01-AChapter 1: About this GuideSend Feedback 31
This page intentionally left blank.
Chapter 2Getting StartedUse the information in this chapter to help you get started using the LEX L10ig.FeaturesThe LEX L10ig features are shown in the following figure and summarized in the following table.Figure 2: LEX L10ig FeaturesTable 1: LEX L10ig FeaturesItem FunctionCharge/Notification LED Solid Blue: New notification (New Voice mail,New Text messages, Missed Calls, AndroidApp Notifications, and so on)Off: Battery is not charging.Solid Red: Battery is charging.Blinking Amber: Waiting to charge.Solid Green: Fully Charged.Display/Screen Tap screen displays all information to operatethe device.Recent Apps key – Press to switch to, stop ormanage applications currently running on thebackground of the device.Table continued…MN002859A01-AGetting StartedSend Feedback 33
Item FunctionHome key – Displays the Home screen with asingle tap.Back key – Displays the previous screen.Closes the keyboard if the on-screen keyboardis open.External Speakers Use for communications in handset mode. Pro-vides audio output for video and voice playbackin speakerphone mode.Menu key – At any screen or application, pressto see available options.3.5 mm Headset Port Connects to headsets (3.5 mm plug).NOTICE: Do not use 2.5 mm to 3.5mm adaptersVolume Up/Down Buttons Increase and decrease audio volume.PTT Button Push-to-Talk (PTT) button enables Push-to-Talkservices over a broadband network and can al-so be interconnected to Project 25 Land MobileRadio (LMR) networks. The PTT application of-fers calls, alerts, group calls, Talk Group calls,and Talk Group monitoring and scanning.For PTT button and application operations, seePush-To-Talk for LEX L10ig manual.IMPORTANT: The PTT is an optionalfeature that requires installation ofsoftware and system connection fol-lowing the LEX L10ig shipping. Toverify if the PTT feature is enabled onthe device, contact your technicalsupport.Power Button Press and hold to turn on the device. Press toturn the screen on or off. Press and hold to se-lect one of these options:•Power On/Off — Turn On/Off.•Airplane mode — Disables all wireless con-nections.•Service switch — Switches between publicand Private carrier modes.•Covert mode — In covert mode, all sounds,and visual indications are turned off. See Covert Mode on page 46.•Vibrate mode — Sets to vibrate only.•Speaker on — Routes the earpiece soundto the speaker.Front Camera Used to capture live video for video calls.Table continued…MN002859A01-AChapter 2: Getting Started34 Send Feedback
Item FunctionEarpiece Provides audio in handset mode.External Charging Contacts Provides power to the device from cradles.Battery Cover Removal Slot Assists in battery cover removal to provide ac-cess to the battery, SIM, CRYPTR, and mi-croSD card holders.microUSB Port Provides USB client and host communications.Rear Camera and Flash Takes photos and video, and provides flash illu-mination for the camera.UnpackingCarefully remove all protective material from the LEX L10ig and save the shipping container for laterstorage and shipping.Verify that the following were received:• LEX L10ig• Battery Cover• 2280 mAh Lithium-ion battery• Charger• USB Cable• Regulatory Guide• Quick Start GuideInspect the equipment for damage. If any equipment is missing or damaged, contact the MotorolaSolutions Support Center immediately.Setting Up the LEX L10igThe initial setup of the LEX L10ig requires that the battery and any cards be installed.NOTICE: The device may be delivered to you with battery, SIM card, microSD card and/orCRYPTR cards already installed, activated, and ready for use. In this case, ignore steps 2through 6 of the following section if they were already performed.Before using the LEX L10ig for the first time, perform the following:1Remove the screen protection film from the LEX L10ig screen. (See Removing the ScreenProtective Film on page 36).2Install the public and/or Private SIM cards. (See Installing the Public and Private SIM Cards onpage 38).3Install the microSD or CRYPTR card (optional). (See Installing a microSD or CRYPTR microEncryption Card on page 37).4Install the battery. (See Installing the Battery on page 39).5Install the battery cover.6Charge the LEX L10ig. (See Charging the LEX L10ig on page 40).MN002859A01-AChapter 2: Getting StartedSend Feedback 35
Removing the Screen Protective FilmThe LEX L10ig is provided with a screen protective film that protects the device during shipping.To enable proper operation of the LEX L10ig, the screen protector must be removed before use.Figure 3: Removing the Screen Protective FilmRemoving the Battery CoverThis procedure explains how to remove the battery cover.Procedure:1Hold the LEX L10ig firmly as shown.2Using the battery cover removal slot, gently lift the battery cover up and away from the LEXL10ig.Figure 4: Removing the Battery CoverMN002859A01-AChapter 2: Getting Started36 Send Feedback
Installing a microSD or CRYPTR micro Encryption CardThe LEX L10ig card holder can support either a microSD card or a CRYPTR micro encryption card.The microSD card is a removable flash memory used for storing media on the LEX L10ig. The LEXL10ig can support microSD cards with up to 64GB memory space. The CRYPTR micro encryption cardis used for voice encryption in features such as data and phone over Virtual Private Network (VPN)and Push-to-Talk (PTT) communication. The CRYPTR micro provides FIPS 140-2 Level 3 storage forcredentials/keys for Data At Rest (DAR) encryption and MVPN. The slot of the card is located underthe LEX L10ig batteryWhen and where to use:NOTICE: The LEX L10ig may be delivered to you with battery, SIM card, and microSD orCRYPTR card already installed, activated, and ready for use. In case a CRYPTR is pre-installed in the LEX L10ig, you must change the CRYPTR password provided by your technicalsupport. This is not a password to access the device but a password to protect MotorolaSolutions secure applications. The CRYPTR password is required whenever the LEX L10ig isrestarted.Procedure:1Slide the card into the card holder slot with contacts facing down.2Push the card into the slot until it is fully seated and locked into place.Figure 5: Installing the microSD or CRYPTR micro Encryption CardRemoving the microSD or CRYPTR CardThis procedure explains how to remove a microSD or CRYPTR micro encryption card.Procedure:1Press and hold the Power button for three seconds.2Touch Power Off.3Touch OK.4Lift the battery cover.5Push the Card Holder lock down to release the card.6Remove the card from the holder.7Replace the battery cover.MN002859A01-AChapter 2: Getting StartedSend Feedback 37
Installing the Public and Private SIM CardsPublic and private phone services require a Subscriber Identification Module (SIM) card.Prerequisites: The SIM card can contain the following information:• Mobile phone service provider account details.• Information regarding service access and preferences.• Contact information, which can be moved to the People application on the LEX L10ig.• Any additional subscribed services.NOTICE: The LEX L10ig requires activated SIM cards. Obtain activated SIM cards from yourorganization administrator.CAUTION:• Electrostatic discharge (ESD) precaution.• For proper ESD precautions to avoid damaging the SIM card. Proper ESD precautionsinclude, but not limited to, working on an ESD mat and ensuring that the user is properlygrounded.When and where to use: Use this procedure to install a SIM card:Procedure:1If the battery is in place, remove the battery as described in Removing the Battery on page 39.2Slide the SIM card into the SIM card holder with the contacts facing down. Note the card notchposition.3Push that the SIM card into the holder until it is fully seated and flat.You should hear a click when the SIM card in fully in place.Figure 6: Installing the Public and Private SIM CardsRemoving the Public and Private SIM CardsWhen and where to use: Use this procedure to remove the public or private SIM cards.Procedure:1Press and hold the Power button for three seconds.2Tap Power Off.3Tap OK.4Lift the battery cover.MN002859A01-AChapter 2: Getting Started38 Send Feedback
5Slide the battery latch to Unlock position.6Lift the battery out of the LEX L10ig.7Push the SIM card to release it from the holder.8Remove the SIM card.9Place the battery back into the LEX L10ig.10 Snap the battery cover back into place.Installing the BatteryWhen and where to use: Perform this procedure to install a battery.Procedure:1Remove the battery from the packaging.2Insert the battery into the battery compartment with the battery contacts facing the bottom of theLEX L10ig.Figure 7: Installing the Battery3Press the top of battery into place.4Place the battery cover into place.5Ensure that all battery cover snaps are fully engaged.Removing the BatteryWhen and where to use: Perform this procedure to remove the battery.Procedure:1Slide a finger nail (preferably a thumb nail) into the Battery Cover removal slot and gently pullthe Battery Cover away from the LEX L10ig2Remove the Battery Cover.3Slide the Battery Lock up and hold it.4With the tip of your finger, lift up the battery from the side closest to the top side of the LEXL10ig.MN002859A01-AChapter 2: Getting StartedSend Feedback 39
Charging the LEX L10igBefore using the LEX L10ig for the first time, charge the battery using the provided USB Charger andUSB Cable or connect the USB Cable to the USB port of a personal computer. An unused battery fullycharges in less than six hours.The LEX L10ig battery can also be charged by one of the optional charging cradles.Figure 8: Charging the LEX L10igNOTICE: Keep the USB cover closed when USB not in use.NOTICE: For detailed description, installation and operation of the LEX L10ig accessories, referthe quick start guides provided with each accessory.Charging TemperatureCharge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Note that charging is intelligentlycontrolled by the LEX L10ig.To accomplish this, for small periods of time, the LEX L10ig alternately enables and disables batterycharging to keep the battery at acceptable temperatures. The LEX L10ig LED indicates when chargingis disabled due to abnormal temperatures by fast blinking amber (once every 2 seconds).Battery Charge IndicationsThe Charge and Notification LED is located at the top, front of the LEX L10ig.Battery charging and power level are also indicated by a battery icon on the status bar.NOTICE: Before checking the battery charge level, remove the LEX L10ig from any powersource (cradle or USB cable connection).MN002859A01-AChapter 2: Getting Started40 Send Feedback
Figure 9: Charge and Notification LEDTable 2: Charge and Notification LED — Charging IndicationsStatus IndicationsOff Battery is not charging. Could indicate that:• Device is not inserted correctly in the cradle• Device is not connected to a USB cable• Charger or cradle is not poweredSlowly blinking red (once every 2 seconds) Battery power is extremely low (less than 10%power left).Solid red LEX L10ig is charging.Fast blinking red (once every 0.5 second) Charging error:• Temperature is too low or too high• Charging has gone on too long without com-pletion (typical charge is four hours)Slowly blinking green (once every 2 seconds) Battery is greater than 90% charged.Solid green Device is completely charged.Slowly blinking blue (once every 4 seconds) A new notification has been received.Alternately blinking blue (1 second) and red (3seconds)Device is charging and a new notification is re-ceived.Alternately blinking blue (1 second) and green(3 seconds)Device is completely charged and a new notifi-cation is received.Slowly blinking blue and red (every other sec-ond)Battery power is extremely low (less than 10%power left) and a new notification is received.Alternately blinking blue (1 second) and fastblinking red (every 0.5 seconds for 3 seconds)A new notification is received during a chargingerror.Slowly blinking amber (once every 2 seconds) Device is waiting to charge.When the battery power falls below a predetermined level the icon indicates the status and a batterydialog box appears indicating the status of the battery. The message displays until the user tapsDismiss.To monitor battery usage, from the Home screen, touch → → Battery.MN002859A01-AChapter 2: Getting StartedSend Feedback 41
Battery ManagementThis topic explains how to check the status of your battery and what you can do to make your batterylast longer.NOTICE: Before checking the battery charge level, remove the LEX L10ig from any AC powersource (cradle or cable).To check the charge status of the main battery, tap → → About phone → Status.Battery status indicates that the battery is discharging and Battery level lists the battery charge (as apercentage of fully charged).Monitor Battery UsageThe Battery screen lists which applications consume the most battery power. Also use it to turn offapplications that were downloaded if they are consuming too much power.To monitor battery usage, tap → → Battery.Figure 10: Battery ScreenThe Battery screen lists the applications using the battery. The discharge graph at the top of thescreen shows the rate of the battery discharge since last charged (short periods of time whenconnected to a charger are shown as thin green lines at the bottom of the chart), and how long it hasbeen running on battery power.Tap an application in the Battery screen to display details about its power consumption. Differentapplications display different information. Some applications include buttons that open screens withsettings to adjust power use.MN002859A01-AChapter 2: Getting Started42 Send Feedback
Low Battery NotificationWhen the battery charge level drops below 20%, the LEX L10ig displays a notice to connect the LEXL10ig to power. The user should charge the battery using one of the charging accessories.Figure 11: Low Battery NotificationWhen the battery charge drops below 10%, the LEX L10ig displays a notice to connect the LEX L10igto power. The user must charge the battery using one of the charging accessories.When the battery charge drops below 4%, the LEX L10ig turns off. Anytime the user then tries topower on the LEX L10ig, the following screen appears.Figure 12: Battery Depleted ScreenThe user must charge the LEX L10ig using one of the charging accessories to retain data.Battery OptimizationObserve the following battery saving tips:• Leave the LEX L10ig inside a cradle connected to AC power at all times when not in use.• Turn off Bluetooth if not needed.• Turn off Wi-Fi if not needed.• Change screen time-out to as short as possible.MN002859A01-AChapter 2: Getting StartedSend Feedback 43
• Charge the LEX L10ig when not in use.• Set the screen to Suspend (Sleep) after a short period of non-use.• Reduce screen brightness.• Minimize use of applications that keep the LEX L10ig from suspending, for example, music or videoapplications.Turning Off the RadioWhen and where to use: Use this procedure to turn off the LEX L10ig radios.Procedure:1Press the Power button until the Quick Settings menu appears.Figure 13: Quick Settings Menu — Airplane Mode2Tap Airplane mode. Alternately, open the Notification panel and tap → Airplane Mode.The airplane icon appears in the Status bar indicating that all the radios are off.MN002859A01-AChapter 2: Getting Started44 Send Feedback
Powering On the LEX L10ig for the First TimePress the Power button to turn on the LEX L10ig. The device boot screen displays as the LEX L10igboots.Figure 14: LEX L10ig Boot ScreenPowering Off the LEX L10igWhen and where to use: Use this procedure to power off the LEX L10ig.Procedure:1Press and hold the Power button until the Power Button menu appears.Figure 15: Selecting Power Off2Tap Power off and then OK.Your phone will shut down is displayed on the screen.MN002859A01-AChapter 2: Getting StartedSend Feedback 45
Entering and Exiting the Suspend ModeSuspend mode (also known as sleep mode) is a low-power mode of operation that helps reduceelectrical power consumption by shutting down parts of the LEX L10ig that are not in use. The LEXL10ig goes into Suspend mode when the Power button is pressed or after a time out period ofinactivity.When and where to use: Use this procedure to enter and exit Suspend mode:Procedure:1To enter Suspend mode, press and release the Power button.The LEX L10ig screen turns off.NOTICE: In Suspend mode, the following items continue to operate:•Power button•PTT Button (if set to be used)• Notification LEDs• Wireless communication.2To exit Suspend mode, press and release the Power button.Setting Time Out to Enter Suspend ModeWhen and where to use: Use this procedure to set the period of inactivity before suspend modeoccurs.Procedure:1From the Home screen, tap: → → Display → Sleep.2Select the inactivity duration before Suspend mode becomes active.3Tap .Covert ModeIn the Covert Mode, the LEX L10ig goes dark and quiet. All visible and audible LEX L10ig alerts andnotifications are shut down. This feature makes the LEX L10ig effectively unnoticeable even in a silentand dark environment.In Covert Mode, the following sounds, visual indications, and keys of the LEX L10ig are disabled:• Display brightness• Touchscreen• Keylight• LED indications• Vibration• Speaker audioNOTICE: In Covert Mode, sound is routed to a Bluetooth headset, if connected or sound isrouted to a wired earpiece, if connected. Alternatively, sound is routed to the LEX L10igearpiece.• Tone indicationsMN002859A01-AChapter 2: Getting Started46 Send Feedback
NOTICE: In Covert Mode, the following features remain active:-Power button-PTT button-Volume button- Four front panel keys-Camera button- Audio or tone indications are available using a wired headset (through headset port) or aBluetooth headsetTurning On Covert ModeWhen and where to use: Use this procedure to turn on Covert Mode.Procedure:1Press and hold the Power button for at least two seconds.The following Power Button menu displays:Figure 16: Power Button Menu2Tap Covert mode.The LEX L10ig screen goes blank.Turning Off Covert ModeWhen and where to use: Use this procedure to turn off Covert Mode.Procedure:1Press and hold the Power button for at least two seconds.The following Power Button menu displays:MN002859A01-AChapter 2: Getting StartedSend Feedback 47
Figure 17: Power Button Menu2Tap Covert mode.The Home screen appears.Locking the LEX L10igThe lock screen automatically displays after predefined time out to prevent unauthorized people fromusing the device. The device does not lock at the same time as it is suspended. The device can alsobe locked manually by the user to disable unwanted key presses or screen tap or to keep datasecured. To manually lock the device, press and release the Power button. When the device is lockedand cellular network signal is available, phone calls, notification of new messages, missed calls andupcoming appointments still can be received. The device locks after a specified time.Selecting a Locking OptionWhen and where to use: Security dictates a specific level of locking for the LEX L10ig. Use thisprocedure to select a locking option.Procedure:1Tap .2Tap .3Tap Security.4Tap Screen lock.The following options are displayed:•None.•Slide — User slides the lock to unlock the device.•Pattern — User must replicate a specified pattern to unlock the device.•PIN — User must enter a pin to unlock the device.•Password — User must enter a specified password to unlock the device.5Select an option.If None or Slide is selected, the Security screen is re-displayed. If Pattern, PIN, or Passwordis selected, a pattern, pin or password must be specified. Then, the Security screen is re-displayed.The LEX L10ig is now set to lock.MN002859A01-AChapter 2: Getting Started48 Send Feedback
Postrequisites: Specify a pattern as described in Specifying a Pattern on page 49 Specify a pin, orpassword as described in Specifying a PIN or Password on page 49. Then, specify a timeout valueas described in Setting the Timeout for Locking the LEX L10ig on page 49.Specifying a PatternPrerequisites: The Pattern option must be selected for Screen lock.When and where to use: Use this procedure to specify a pattern to unlock your LEX L10ig.Procedure:1Tap .2Tap .3Tap Security lock.4Select Pattern.5Using a finger, draw a pattern to unlock your LEX L10ig6Tap Continue.7Draw the same pattern again.8Tap Confirm.The Security screen is re-displayed.A pattern must be entered to unlock the LEX L10ig.Specifying a PIN or PasswordPrerequisites: The PIN or Password option has been selected for Screen lock.When and where to use: Use this procedure to specify a PIN or password to unlock your LEX L10ig.Procedure:1Tap .2Tap .3Tap Security lock.4Select PIN or Password.5Enter a pin or password.6Tap Continue.7Enter the pin or password again.8Tap OK.The Security screen is re-displayed.A pin or password must be entered to unlock the LEX L10ig.Setting the Timeout for Locking the LEX L10igPrerequisites: Screen lock must be set to Pattern, PIN, or Password.MN002859A01-AChapter 2: Getting StartedSend Feedback 49
When and where to use: Use this procedure to set the timeout value to lock the LEX L10ig.Procedure:1Tap .2Tap .3Tap Security.4Tap Automatically lock.A list of timeout values is displayed.5Select a timeout value from the list.6The Security screen is re-displayed.Unlocking the LEX L10igWhen the LEX L10ig is not used for a period of time and the user tries to access the device, the Lockscreen displays.Depending on which Screen lock option is active, the user does one of the following:• Nothing• Slide the slider to the unlock position• Enter a pattern, pin, or password.Unlocking the LEX L10ig Using a PatternWhen and where to use: Use this procedure to unlock the LEX L10ig with a pattern.Procedure:1Press and release the Power button.2Using a finger, draw the specified pattern on the screen.Once the correct pattern is drawn, the device unlocks.Unlocking the LEX L10ig Using a PIN or PasswordWhen and where to use: Use this procedure to unlock the LEX L10ig with a PIN or password.Procedure:1Press and release the Power button.2In the text field, enter your pin or password.3Tap Done.The device unlocks and the Home screen is shown.MN002859A01-AChapter 2: Getting Started50 Send Feedback
Calling Emergency from a Locked LEX L10igYou can make an emergency call even when the LEX L10ig is locked and you do not remember thePIN.When and where to use: Use this procedure to make an emergency call when the device is lockedand you do not remember the PIN:Procedure:1Tap EMERGENCY CALL at the bottom of the lock screen.The Emergency Dialer screen displays.2Enter the emergency number.3Tap .Setting the Date and TimeWhen the LEX L10ig is connected to cellular network, date and time are automatically synchronized.When and where to use: Perform this procedure to manually set the date and time:Procedure:1Tap .2Tap .3Tap Date & time.4Tap Automatic date & time to disable automatic date and time synchronization.5Tap Automatic time zone to disable automatic time zone synchronization.6Tap Set date.7Slide your finger up and down to select the month, date and year.8Tap Done.9Tap Set time.10 Slide your finger up and down to select the hour, minutes and part of the day.11 Tap Done.12 Tap Select time zone.13 Tap to select a time zone from the list.14 Tap .Setting the DisplayThe following LEX L10ig display features can be customized:• Brightness — Set the brightness of the display.• Auto-rotate — Set the content to rotate automatically when the device is turned.• Sleep — Set the length of time the device waits before turning off the display’s backlight.• Daydream — Set the device to launch a screensaver when the device is docked inside a cradle orcharging.MN002859A01-AChapter 2: Getting StartedSend Feedback 51
• Font size — Change the font size for display text.• Cast screen — Enable the device to project the screen to a TV or other device.Setting Screen BrightnessWhen and where to use: Use this procedure to set the screen brightness.Procedure:1Tap .2Tap .3Tap Display.4Tap Brightness.5Tap Automatic brightness to set the device to automatically adjust the brightness using thebuilt-in light sensor. Use the slider to set a brightness level.6Tap .Setting Screen RotationScreen rotation enables the LEX L10ig to automatically determine the orientation of the screen toportrait or landscape.When and where to use: Use this procedure when you want to set your screen to automaticallyrotate:Procedure:1 NOTICE: Some applications may not support screen rotation.Tap .2Tap .3Tap Display.4Check Auto-rotate screen to automatically switch orientation when the LEX L10ig is rotated.NOTICE: The Home screen does not rotate.5Tap .Setting Up Sleep ModeUse this procedure to set up sleep mode (screen time-out).Procedure:1Tap .2Tap .3Tap Display.4Tap Sleep.MN002859A01-AChapter 2: Getting Started52 Send Feedback
5Select one of the sleep values:• 15 seconds• 30 seconds (default)• 1 minutes• 2 minutes• 5 minutes• 10 minutes• 30 minutes6Tap .Setting Up DaydreamWhen and where to use: The Daydream application behaves as a screensaver when the LEX L10igis docked inside a cradle and/or in sleep mode. Use this procedure to set up a screensaver.Procedure:1From the Home screen, tap .2Tap .3Tap Display.4Tap Daydream.5Select from Clock, Colors, Photo Frame or Photo Table.6Tap to configure the item selected in the previous step.7Tap WHEN TO DAYDREAM and select when you would like the feature to be active (Whiledocked, while charging or either).8Tap START NOW to preview and confirm your selection.9Tap .Setting the Font SizeWhen and where to use: Use this procedure to change the font size.Procedure:1Tap .2Tap .3Tap Display.4Tap Font size.5Select one of the font size values:• Small• Normal (default)• Large• HugeMN002859A01-AChapter 2: Getting StartedSend Feedback 53
6Press .Enabling Cast ScreenWhen and where to use: Use this procedure to enable the LEX L10ig to project the its screen to a TVor other device.Procedure:1From the Home screen, tap .2Tap .3Tap Display.4Tap Cast screen.5Tap .6Select Enable wireless display.Projecting the LEX L10ig Screen on Another DevicePrerequisites: The Cast screen must be enabled.When and where to use: Use this procedure to project the LEX L10ig screen on another device.Procedure:1From the Home screen, tap .2Tap .3Tap Display.4Tap Cast screen.5Select the device to show your device screen on.Your device should now display on the other device.6To stop projecting your device screen, swipe down from the Status bar and tap Disconnectunder Cast screen.General Sound SettingUse the Sounds settings to configure media and alarm volumes.On the Home screen, tap → → Sound.Alternately, open the Notification panel and tap → Settings → Sound.MN002859A01-AChapter 2: Getting Started54 Send Feedback
Figure 18: Sound Screen•Volumes – Use to change the volume of media, ringtones, notifications, and alarms.•Call Ringtone and Vibrate-Phone ringtone — Tap to select a ringtone to sound when an incoming call is received.-Vibrate when ringing — Check to make the device vibrate when a call is received.NOTICE: Setting volume can also be done by pressing the Volume button, up and down,during a call, or while playing music or a video. When not on a call, pressing the Volumebutton all the way down to set the device to vibrate. During an in-coming call, pressingthe Volume button up and down changes the ringtone volume.Figure 19: Volume Button•System-Default notification sound — Tap to select a sound to play for all system notifications.-Dial pad tap tones — Check to play a sound when a device key is touched.-Touch sounds — Check to play a sound when making screen selections.MN002859A01-AChapter 2: Getting StartedSend Feedback 55
-Screen lock sounds — Check to play a sound when locking and unlocking the screen.-Vibrate on tap — Check to have the device vibrate when touching soft keys and on certainscreen interactions.-Emergency tone — Select and check Alert to play a tone or Vibrate when an emergencynotification is received. Select Off to disable emergency notification.Public and Private Carrier ModesThe LEX L10ig operates on both public and private carriers.Private Mode• LTE B14Public Mode• LTE B4 and B13• CDMA EVDO Rev. A (Band 0, Band 1) 3G, 1XThe user can manually switch modes to operate on the Private Mode LTE network or the Public CarrierMode.The LEX 10i Mission Critical LTE Handheld operates in:•4G LTE Bands: 3, 4, 5, 7, 8, 20, 26, 28•3G/UMTS Bands: 1, 2, 4, 5, 8 Quad Band•GSM: 850 MHz, 900 MHz, 1800 MHz, 1900 MHz•802.11 a/b/g/n Wi-Fi and MiracastSwitching Modes Using the Power ButtonWhen the LEX L10ig is equipped with Private and Public SIM cards, the Power button can be used toswitch modes.Prerequisites: The LEX L10ig is equipped with Private and Public enabled SIM cards.When and where to use: Use this procedure to switch modes using the power button.NOTICE: You may need to switch between private and public network modes when you want touse capabilities provided by one network that are not provided by the other. For example, if thephone is in private mode, switch to public mode before you can dial numbers that are notincluded in the private network.Procedure:1Press and hold the Power button until a menu appears.MN002859A01-AChapter 2: Getting Started56 Send Feedback
Figure 20: Service SwitchThe current carrier mode is indicated under the Service switch option.2Tap Service switch.A confirmation popup is displayed.Figure 21: Switch Networks Confirmation Popup3Tap Switch.Switching Modes Using the Settings AppWhen the LEX L10ig is equipped with Private and Public SIM cards, the Settings application can beused to switch modes.Prerequisites: The LEX L10ig is equipped with Private and Public enabled SIM cards.When and where to use: Use this procedure to switch modes using the setting applications.NOTICE: You may need to switch between private and public network modes when you want touse capabilities provided by one network that are not provided by the other. For example, if thephone is in private mode, switch to public mode before you can dial numbers that are notincluded in the private network.Procedure:1On the Home screen, tap .2Tap .3Tap More... .4Tap Mobile networks.5Tap Select network.6Select Public or Private.A confirmation popup is displayed.MN002859A01-AChapter 2: Getting StartedSend Feedback 57
Figure 22: Switch Networks Confirmation Popup7Tap Switch.LEX L10ig Emergency ButtonThe LEX L10ig includes an Emergency Button which aids responders during emergencies. Thisfeature helps reduce response times in an emergency situation.The device must be pre-configured based on the responder’s specific requirements before it is given toa user. Once the device is configured to use the Emergency Button, users can access the actions byswiping the Home screen icon up to access the Home screen overlay.The Emergency Button supports the following actions:• Initiate a phone call — The Emergency Button can be pre-configured to initiate an E911 call or toinitiate a call to a customized phone number.• Send an SMS notification (with/without GPS) — The Emergency Button can be pre-configured tosend an SMS notification to customized numbers. Location coordinates (if available) of LTE handsetand information about paired (if paired) Land Mobile Radio (LMR) is also sent as part of the textmessage.• Initiate a phone call and send an SMS notification (with/without GPS) — The Emergency Buttoncan be pre-configured to perform both of the above actions.NOTICE: You are required to have a voice and text plan to initiate calls and send SMSnotifications.MN002859A01-AChapter 2: Getting Started58 Send Feedback
Chapter 3Using the LEX L10igThis chapter explains the indicators, buttons, status icons, and controls on the LEX L10ig. This chapteralso provides basic instructions for using the device.Using the TouchscreenThe multi-tap sensitive screen is used to operate the LEX L10ig.Table 3: Using the TouchscreenAction ResultTap Tap to:• select items on the screen• type letters and symbols using the on-screenkeyboard• press on-screen buttonsTap and Hold Tap and hold:• an item on the Home screen to move it to anew location or to the trash• an item in Apps to create a shortcut on theHome screen• an empty area on the Home screen until themenu appearsDrag Tap and hold an item for a moment and thenmove finger on the screen until reaching thenew position.Swipe Move finger up and down or left and right on thescreen to:• unlock the screen• view additional Home screens• view additional application icons in theLauncher window• view more information on an application’sscreenDouble-tap Tap twice on a web page, map, or other screento zoom in and out.Pinch In some applications, zoom in and out by plac-ing two fingers on the screen and pinching themtogether (to zoom out) or spreading them apart(to zoom in).MN002859A01-AUsing the LEX L10igSend Feedback 59
Using the On-Screen KeyboardThe on-screen keyboard is used to enter text in a text field.To configure the keyboard settings, tap and hold (comma key) > slide your finger up to and thenselect Android Keyboard Settings.Figure 23: Android Keyboard SettingsA description of the settings can be found in Android Keyboard Settings on page 61.Editing TextEdit entered text and use menu commands to cut, copy, and paste text within or across applications.Some applications do not support editing some or all of the text they display; others may offer their ownway to select text.Entering Numbers, Symbols and Special CharactersTo enter numbers and symbols:• Without switching to the Numbers or Symbols keyboard, tap and hold one of the top-row keys untila menu appears then select a number. Keys with alternate characters display an ellipsis ( ... ) belowthe character.• Tap the Shift key to enter one capital letter.• Tap and hold the Shift key until it changes state (Shift key is underlined) to enter two or morecapital letters. Tap Shift key again to return to the lowercase keyboard.• Tap to switch to the numbers and symbols keyboard.• Tap the key on the numbers and symbols keyboard to view additional symbols.To enter special characters, tap and hold a number or symbol key to open a menu of additionalsymbols.MN002859A01-AChapter 3: Using the LEX L10ig60 Send Feedback
• A larger version of the key displays briefly over the keyboard.• Keys with alternate characters display an ellipsis ( ... ) below the character.Android Keyboard SettingsThe Android Keyboard Settings may be personalized to meet your preferences.Table 4: Android Keyboard SettingsSetting DescriptionGENERALInput Languages Selects the language used in the keyboard.Auto-capitalization Automatically capitalize the first letter after a pe-riod.Vibrate on keypress Vibrates the device when a key is pressed.Sound on keypress Makes a sound on the device when a key ispressed.Popup on keypress Pops up a duplicate of the key pressed.Voice input key Allows you to speak the name of the key to in-put a key.TEXT CORRECTIONPersonal Dictionary Uses your personal dictionary when correctingwords.Add-on dictionaries Allows you to add additional dictionaries to cor-rect words.Block offensive words Blocks offensive words from being suggested tocorrect words.Auto-correction Sets the level of auto-correction to: Off, Mod-est, Aggressive, or Very aggressive.Show correction suggestions Displays a list of corrections so that you can se-lect make a selection.OTHER OPTIONSNext word suggestions Anticipates the next word that you want to typebased on the last word typed.Advanced settings The Advanced settings should only be set byexperts.MN002859A01-AChapter 3: Using the LEX L10igSend Feedback 61
Motorola Solutions Home Experience (MHx)The Motorola Solutions Home Experience (MHx) is the engine that drives the user interface of the LEXL10ig. Specifically, MHx provides a unique experience for customizing the LEX L10ig Home screen.LEX L10ig Home ScreenThe Home screen displays after the LEX L10ig turns on and unlocks.Figure 24: Default Home ScreenThe Home screen is completely customizable depending on the specifications for your agency. Eachorganization may have a different Home screen. The Radio Manager (RM) Tool, described in the LEXL10ig Service Provisioning Guide, can be used to stage the Home screen on your devices.NOTICE: When CRYPTR Card is used, the device requires setting a password after initial bootand entering this password whenever the device restarts. This is not a password to access thedevice but a password to protect Motorola Solutions secure applications.After suspend mode or screen time-out, the screen displays with the lock slider. Slide in anydirection towards the outside of the screen to unlock the screen.NOTICE: If you have changed the Screen lock option, depending on the selected option, youwill have to enter a pattern, pin, or password to unlock the LEX L10ig.The Home screen consists of the following items:• Core Applications Widget — Provides shortcuts such as:- Phone Dialer- Contacts- Application Launcher- Camera- Search FeatureMN002859A01-AChapter 3: Using the LEX L10ig62 Send Feedback
- Other shortcuts determined by your agency• Calendar Widget• email Widget• Messaging Widget• Search Widget• My Apps Widget• Other Widgets determined by your agency• Home Screen Overlay — Provides quick access to core functions.The Home screen provides four screens for placement of widgets and shortcuts. Swipe the screen leftor right to view the additional screens.Home Screen OverlayThe Home screen overlay provides quick access to core functions (Emergency Button). Swipe theHome screen up from the icon to access the Home screen overlay.Customizing the Home ScreenThe Home screen contains panels that can be accessed by swiping the page to the left or right. Panelsprovide more space for adding widgets to the Home screen and can be customized by the user.This section describes how to:• Add Widgets• Move Widgets• Remove Widgets• Configure Home screen settingsAdding WidgetsWidgets are applications that run on your Home screen.When and where to use: Use this procedure to add one or more widgets to your Home screen.Procedure:1Swipe the Home screen left or right to locate the panel that you want to add a widget to.2Touch and hold a gray area of the panel until you see the following icons near the bottom of thescreen:3Tap the Widgets icon to reveal the widgets.MN002859A01-AChapter 3: Using the LEX L10igSend Feedback 63
Figure 25: Widgets ScreenNOTICE: To identify Motorola Solutions Widgets, their names are preceded by MHx.4The Widgets screen contains multiple panels. Swipe the Widgets screen left or right to locatethe widget that you want to add.5Touch and hold the widget; then, slide the widget down the screen and place it in the currentpanel.If there is not enough room in the panel or you want to place the widget in a new panel, slide thewidget to the right of the screen until a blank panel appears. Then, place the widget in the newpanel.MN002859A01-AChapter 3: Using the LEX L10ig64 Send Feedback
Figure 26: Example of a Widget Added to New PanelNOTICE: Some widgets are re-sizable as soon as you place it in a panel. Press and holdthe widget. If the re-size tool displays (four dots, one on each side of the widget), you canre-size the widget by dragging the dots on the re-size tool.Adding Shortcuts to the My Apps WidgetThe My Apps widget is a special MHx widget where you can add shortcuts for quick access.Prerequisites: Before adding shortcuts, the My Apps widget must be added to the Home screen.When and where to use: An empty My Apps needs shortcuts to be functional. Use this procedure toadd shortcuts to the My Apps widget.Procedure:1Add My Apps widget as described inAdding Widgets on page 63.An empty My Apps widget displays.MN002859A01-AChapter 3: Using the LEX L10igSend Feedback 65
Figure 27: Empty My Apps Widget2Tap the My Apps widget to add shortcuts to it.A screen with a list of shortcuts is displayed.MN002859A01-AChapter 3: Using the LEX L10ig66 Send Feedback
Figure 28: List of Shortcuts for My Apps Widgets3Select each shortcut that you want to add to the My Apps widget.You may add up to five shortcuts.4Tap Done.Shortcuts are added to the My Apps widget.MN002859A01-AChapter 3: Using the LEX L10igSend Feedback 67
Figure 29: My Apps Widget with Shortcuts AddedChanging My StatusWhen and where to use: Perform this procedure to set the status of the LEX L10ig user to eitherAvailable or Busy. No matter what the status is set to, calls are still received. This status is shown toother users.NOTICE: The My Status widget must be added before it is visible in the Home screen. The MyStatus widget is used in conjunction with the UNS System from Motorola Solutions or when youhave WAVE 7000. One of these systems must be active before My Status will work properly.Procedure:1Tap the My Status dropdown menu.Figure 30: My Status WidgetThe My Status options menu is displayed.Figure 31: Status SelectionMN002859A01-AChapter 3: Using the LEX L10ig68 Send Feedback
2Tap one of the status states.Status is immediately set to the selected state.Moving WidgetsWhen and where to use: Use this procedure to move (relocate) widgets on the Home screen.Procedure:1Navigate to the Home screen panel where the widget is located.2Touch and hold the widget; then, slide the widget to a new location.If you want to move the widget to another panel, slide the widget left or right to that panel; thenslide the widget to a location in the panel.Removing WidgetsWhen and where to use: Use this procedure to remove or clear space on your Home screen.Procedure:1Slide the Home screen panel until you locate the panel that holds the widget that you want toremove.2Touch and hold the widget while sliding it down to the bottom of the panel.X Remove appears near the bottom of the screen.3Slide the widget to X Remove until the widget turns red and your finger is directly above XRemove; then, release the widget.The widget is removed from the panel.NOTICE: The widget is only removed from the panel. It is not deleted from the LEXL10ig.MN002859A01-AChapter 3: Using the LEX L10igSend Feedback 69
Example of a Customized Home Screen PanelThis topic shows you an example of a customized Home screen panel.Figure 32: Example of a Customized Home Screen PanelThe above figure shows a customized Home screen panel with the following widgets:•My Status• Two Direct dial widgets•Calendar•My AppsStatus BarThe Status bar displays the time, notification icons (left side) and status icons (right side).Figure 33: Status BarIf there are more notifications than can fit in the Status bar, it is indicated that more notifications exist.Open the Notifications panel to view all notifications and status.MN002859A01-AChapter 3: Using the LEX L10ig70 Send Feedback
Notification IconsNotification icons alert you when a notification has been received.Table 5: Notification IconsIcon DescriptionIndicates that more notifications are availablefor viewing.Indicates that data is syncing.Indicates an incoming email.Converged Services notification. This icon hasfour parts: location services (top left), radioservices (top right), priority manager (bottomleft), and presence service (bottom right).Converged Services error notification. The tri-angle with the exclamation point inside indi-cates an error. If an error is observed, the usercan swipe down from the icon to reveal the er-ror. An example is:Indicates location reporting service is enabled.Indicates the device is searching location data.Indicates an error or a warning that requiresuser action in the location application.Indicates an error or a warning that requiresuser action in the presence application.CRYPTR feature error.Indicates an upcoming event.Indicates an open Wi-Fi network is available.Radio Services application is on.Indicates a song is playing.Indicates a problem with sign-in or sync has oc-curred.Indicates the device is uploading data.Table continued…MN002859A01-AChapter 3: Using the LEX L10igSend Feedback 71
Icon DescriptionIndicates the microSD card is almost full.Indicates the device is downloading data whenanimated and download is complete when stat-ic.Indicates the device is connected via USB ca-ble.Indicates the device is connected to or discon-nected from virtual private network (VPN).Preparing SD card.Indicates no SIM is installed.Indicates the USB debugging is enabled on theLEX L10ig.Indicates the device has received a text mes-sage.Indicates a missed call.Indicates tethering is active for Bluetooth orUSB. Also used to indicate a Wi-Fi hotspot isactive.Screenshot captured.Indicates that Wi-Fi hotspot is active.My Status indicates device is available.My Status indicates device is busy.LEX L10ig Status IconsStatus icons give you status information on actions occurring on your LEX L10ig.Table 6: Status IconsIcon DescriptionIndicates that GPS is in use.Indicates the device is searching location data.Indicates the Alarm is active.Table continued…MN002859A01-AChapter 3: Using the LEX L10ig72 Send Feedback
Icon DescriptionIndicates all sounds except media and alarmsare silenced and vibrate mode is active.Indicates the ringer is silenced.Microphone is muted during a call.Indicates the battery is fully charged.Indicates the battery is partially drained.Indicates the battery charge is low.Indicates the battery charge is very low.Indicates the battery charge is low.Indicates the battery is charging.Indicates the Airplane Mode is active. All ra-dios are turned off.Indicates Bluetooth is on.Set to operate on Private network.Connected to a Wi-Fi network.No Wi-Fi signal.Mobile network signal strength.No mobile network signal.Connected to a 4G network.Connected to a 3G network.Roaming from a network.No SIM card installed.Managing NotificationsNotification icons report the arrival of new messages, calendar events, alarms, and ongoing events.When a notification occurs, an icon appears in the Status bar with a brief description. See NotificationIcons on page 71 for a list of possible notification icons and their description. Open the Notificationspanel to view a list of all the notifications.MN002859A01-AChapter 3: Using the LEX L10igSend Feedback 73
To open the Notification panel drag the Status bar down from the top of the screen.Figure 34: Notification PanelTo respond to a notification, open the Notifications panel and then tap a notification. TheNotifications panel closes and the subsequent activity is dependent on the notification.To clear all notifications, open the Notifications panel and tap . All event-based notifications areremoved. Ongoing notifications remain in the list.NOTICE: Some notifications cannot be cleared and will remain to inform you of runningapplicationsTo close the Notifications panel, drag the bottom of the Notifications panel to the top of the screen ortap .Working with StatusLEX L10ig users work with status in two ways: setting their own status (Available or Busy) and viewingthe status of their contacts.The status displayed for Contacts shows the following:• The presence status currently detected by a call system or network (offline or online status)• The availability status currently selected by the contact (Available or Busy)My StatusThe LEX L10ig user sets the value of My Status to Available or Busy. This status is shown in theContacts and Session Log screens of other LEX L10ig users. The Available status:• Is the default “sign-on” state• Indicates the LEX L10ig user is willing to send and receive callsMN002859A01-AChapter 3: Using the LEX L10ig74 Send Feedback
The Busy status indicates that the LEX L10ig user is busy but the LEX L10ig is still able to send andreceive calls.Status of ContactsThe status of LEX L10ig contacts is shown in all of the Contacts screens, and People list. The statusof a contact can be:• Offline• Available•BusyIf the contact is not connected to and registered with a system server, the status shown is Offline.If the contact is connected to and registered with the system server, the My Status value (Available orBusy) of the contact is shown.When the Contacts are synchronized with the People list, the Contacts are added to the regulardevice contacts.Quick SettingsThe Quick Settings panel provides easy access to some frequently used settings.You can use one of two methods:• With two fingers, drag the Status Bar panel down to display the Quick Settings panel.• Drag the Status Bar down from the top of the screen. The Quick Settings icon displays in the topright corner. Tap to display the Quick Settings panel.Figure 35: Quick Settings Panel• Display the owner’s contact image. Tap to open the owner’s contact information.•Brightness — Opens the Brightness setting dialog box to set the screen brightness.MN002859A01-AChapter 3: Using the LEX L10igSend Feedback 75
•Settings — Opens the Settings screen.•Wi-Fi — Displays the current Wi-Fi connection. Tap to open the Wi-Fi settings screen.•Service — Displays the current cellular service used; public or Private.•Battery Status — Displays the current battery charge level. Tap to open the Battery screen.•Airplane Mode — Displays the Airplane mode status. Tap to toggle Airplane mode on and off. Turnon Airplane mode to turn off all the radios.•Bluetooth — Displays the current state of the Bluetooth radio. Tap to open the Bluetooth settingsscreen.•Location — Displays the current state.To close the Quick Settings panel, drag the bottom of the Quick Settings panel to the top of thescreen or tap .ApplicationsThe Apps screen displays icons for all installed applications.Table 7: ApplicationsIcon DescriptionAOSP Browser — Use to access the Internetor agency intranet.Calculator — Provides the basic and scientificarithmetic functions.Calendar — Use to manage events and ap-pointments. Allows synchronization with Googleaccount calendar.Camera / Video Recorder — Take photos orrecord videos. For more information, see Cam-era on page 103.Clock / Alarms — Use to set an alarm, stop-watch, or timer.Dialer — Use to make phone calls. See Callingon page 81 for more information.Downloads — lists all downloads files.Email — Use to send and receive email.File Browser — Use to view and manage fileson the LEX L10ig.Gallery — Use to view photos stored on the mi-croSD card. For more information, see Galleryon page 111 for more information.Messaging - Send SMS and MMS messages.See Messaging on page 97 for more informa-tion.Table continued…MN002859A01-AChapter 3: Using the LEX L10ig76 Send Feedback
Icon DescriptionMotorola Device Management — Enablesstaging and management of the device for initialuse by initiating the deployment of settings,firmware, and software from a server. For moreinformation, see the LEX 10i Service Provision-ing Guide.Motorola TechDocs — Use to view device on-device documentation.MVPN — Enables the Motorola Solutions Mo-bile VPN (MVPN).Movie Studio — Use to combine existing vid-eos.Music — Access music stored on the device.My Status — Use to view the current availabili-ty of the user and device to other agency usersand system.People — Use to manage contact information.Push-To-Talk — Enables Push-to-Talk serv-ices over a broadband network and intercon-nected to Project 25 Land Mobile Radio (LMR)networks to enable PTT interoperability be-tween broadband and P25 radio users (availa-ble only if PTT application is installed and acti-vated on the LEX 10i).Radio Services — Use to pair Operations Criti-cal Wireless Push-to-Talk (PTT) Pod.Radio Management Link Client — Enablesconnecting the device to a remote host comput-er for staging, firmware installation, applicationinstallation, and application removal by techni-cal support. See the Radio Management OnlineHelp for more information on the RM Tool.Search — Searches the device for an App orfeature, Also searches the Web using GoogleSearch.Settings — Use to configure the device.Software Licensing — Licensing for softwareinstalled on the device.Sound Recorder — Use to record audio.Voice Dialer — Use to place calls by speaking.MN002859A01-AChapter 3: Using the LEX L10igSend Feedback 77
FoldersUse Folders to organize similar applications together. Tap the folder to open and display items in thefolder.Creating a FolderWhen and where to use: Use a procedure to create a folder on the Home screen.NOTICE: There must be a minimum of two app icons to create a folder.Procedure:1Go to the desired Home screen.2Tap and hold on one application icon.3Drag the icon and stack on top of another icon.4Lift and release.Naming FoldersWhen and where to use: Use this procedure to name folders. You can give folders a name after theyare created.Procedure:1Tap the folder.Figure 36: Opened Unnamed Folder2Tap the title area and enter a folder name using the keyboard.3Tap Done.4Tap anywhere on the Home screen to close the folder.The folder name appears under the folder.Figure 37: Named FolderRemoving a FolderWhen and where to use: When a folder is no longer needed, you can remove it. Use this procedure toremove a folder.Procedure:1Tap and hold the folder until it enlarges and the device vibrates.MN002859A01-AChapter 3: Using the LEX L10ig78 Send Feedback
2Drag the folder to X Remove until the folder turns red; then release.The folder is removed from the screen.Accessing Files from a ComputerWhen and where to use: Use this procedure to allow access to files from your computer using MTP(media device) or using PTP (camera software).Procedure:1Connect the device to your computer using a USB cable.If one of the following messages is displayed in the notification area (top of screen): Connectedas a media device or Connected as a camera, you already have access to the files on yourdevice.2Swipe down from the Status Bar.Figure 38: Notifications Screen3Tap the notification that has a Touch for other USB options subtitle (in this case Connectedas a media device).MN002859A01-AChapter 3: Using the LEX L10igSend Feedback 79
Figure 39: MTP / PTP Selection Screen4Select Media device (MTP) to access media files from a Windows computer or Camera (PTP)to access photos / files on a computer that does not support MTP.5Tap to return to the previous screen.MN002859A01-AChapter 3: Using the LEX L10ig80 Send Feedback
Chapter 4CallingMake a phone call from the Phone application, the People application, or other applications or widgetsthat display contact information.Push-To-Talk (PTT) CallingThe handheld must be provisioned for PTT services on a Motorola Solutions PTT server. To make PTTcalls and how to receive PTT calls on the LEX L10ig, see Push-To-Talk for LEX L10ig manual.Emergency CallingThe service provider programs one or more emergency phone numbers that you can call under anycircumstances, even when the phone is locked, a SIM card is not inserted, or the phone is notactivated. However, the SIM card must be installed in the LEX L10ig to enable preset emergencynumbers stored on it.Emergency numbers vary by country. The device must be switched to public mode to use theemergency numbers for your country on the public SIM.The LEX L10ig pre-programmed emergency numbers may not work in all locations, and sometimes anemergency call cannot be placed due to network, environmental, or interference issues. For additionalinformation, contact your organization’s technical support.IMPORTANT: The numbers you can call depend on whether the device is in private mode orpublic mode. For example, if the device is in private mode, you must switch to public modebefore you can call numbers that are not included in the private network. To switch modes, see Switching Modes Using the Power Button on page 56 and Switching Modes Using the SettingsApp on page 57.NOTICE: If your device is licensed for these options, see LEX L10ig Service Provisioning Guideto set up other emergency alert methods.Audio ModesThe device offers three audio modes for use during phone calls:•Handset Mode: Switches audio to the receiver at the top front of the device, so the user can usethe device as a handset and is the default mode.•Speaker Mode: Use the device as if on speaker phone.•Headset Mode: Connect a Bluetooth or wired headset to automatically switch audio to the headset.Using a Bluetooth HeadsetUse a Bluetooth headset for audio communication when using an audio-enabled application. See Pairing LEX L10ig with Bluetooth Accessory on page 93 for information on connecting a Bluetoothheadset to the device. Set the volume appropriately before putting on the headset. When a Bluetoothheadset is connected, the speakerphone is muted.Using a Wired HeadsetUse a wired headset (with 3.5 mm plug) for audio communication when using an audio-enabledapplication. Set the volume appropriately before putting on the headset. When a wired headset isconnected, the speakerphone is muted.MN002859A01-ACallingSend Feedback 81
Lift the headset cover and insert the headset plug.To end a call using the wired headset, press and hold the headset button until the call ends.Figure 40: Insert Wired Headset PlugNOTICE: The headset cover must be properly seated after removing the headset plug.Adjusting Audio VolumeUse the Volume buttons to adjust the volume of the ringer when not in a call and the audio volumewhen in a call.NOTICE: Adjust the conversation phone volume during a call. Adjusting the volume while not ina call affects the ring and notification sound levels.Making a Call Using the DialerWhen and where to use: Use this procedure to make a call using the dialer tab to dial phonenumbers.Procedure:1On the Home screen, tap .MN002859A01-AChapter 4: Calling82 Send Feedback
Figure 41: Dialer Screen2Tap the tab above the dialer.3Tap the keys to enter the phone number.4Tap below the dialer to initiate the call.MN002859A01-AChapter 4: CallingSend Feedback 83
Figure 42: Call in ProgressIf... Then...You want to display the dialer. Tap .You want to turn on the speakerphone. Tap .You want to mute the call. Tap .You want to add another person to the call. Tap .5Tap to end the call.Making a Call Using People List ContactsWhen and where to use: Use this procedure to make a call using people list contacts to initiate a call.Procedure:1On the Home screen, tap .2Tap the tab.3From the people list contacts, tap a phone contact or a PTT contact for making a One-to-OnePrivate or Alert Call (see Push-To-Talk User Guide For LEX L10ig).MN002859A01-AChapter 4: Calling84 Send Feedback
Figure 43: People List Contact4Tap the phone number next to the contact to initiate the call.5Tap to end the call.Making a Call Using Call HistoryWhen and where to use: Use this procedure to make a call using call history. Call History is a list ofall the calls placed, received, or missed. It provides a convenient way to redial a number, return a call,or add a number to Contacts.Procedure:1On the Home screen, tap .2Tap the tab.MN002859A01-AChapter 4: CallingSend Feedback 85
Figure 44: Call History Tab3Tap next to the contact to initiate the call.4Tap to end the call.Example:Arrow icons beside a call indicate the type of call. Multiple arrows indicate multiple calls:• — Missed incoming call• — Received incoming call• — Outgoing callMaking a Conference CallWhen and where to use: Conference calling is available if you have two or more people you wish tohave a conversation with at the same time. Use this procedure to create a conference phone sessionwith multiple people.NOTICE: Conference calling may not be supported by your service provider. Check with yourtechnical support for conference calling availability. The total number of conference callparticipants may be limited by your service provider. For the maximum number of participants ina conference call, contact technical support.Procedure:1On the Home screen, tap .2Tap the tab above the dialer.3Tap the keys to enter the phone number.MN002859A01-AChapter 4: Calling86 Send Feedback
4Tap below the dialer to initiate the call.5When the call connects, tap .The first call is placed on hold.6Tap the keys to enter the second phone number.7Tap below the dialer to initiate the call.8When the call connects, the first call is placed on hold and the second call is active.Figure 45: Two CallsThe screen quickly changes to:MN002859A01-AChapter 4: CallingSend Feedback 87
Figure 46: Two Calls Connected9Tap to create a conference call with three people.Figure 47: Merged Calls10 Tap to add another call.The conference is placed on hold.MN002859A01-AChapter 4: Calling88 Send Feedback
11 Tap the keys to enter the second phone number.12 Tap below the dialer to initiate the call.13 Tap to add the third call to the conference.14 Tap to rotate between the individual calls.Calls are rotated starting with the first call. This allows you to speak privately to one party. Tap to rotate to the next party. When the rotation is complete, you are placed back intoconference mode and all calls are active.Answering Calls with a Bluetooth HeadsetWhen you receive a phone call, the Incoming Call screen opens, displaying the caller ID and anyadditional information about the caller that is in the People application.NOTICE: To connect a Bluetooth headset to the LEX L10ig, see Pairing LEX L10ig withBluetooth Accessory on page 93.When a call arrives, tap the Call button on the Bluetooth headset to answer the call.To silence the ringer before answering the call, press the volume down button on the side of LEXL10ig.To end the call press the Call button on the Bluetooth headset.All incoming calls are recorded in the Phone application call Logs tab. If you miss a call, you willreceive a notification.Call SettingsUse the Call Settings to modify options related to the phone call feature.NOTICE: Not all options are available for all configurations.•Ringtone & Vibrate-Phone Ringtone — Tap to select a ringtone to sound when an incoming call is received.-Vibrate When Ringing — Check to make the device vibrate when a call is received.•Other Call Settings-Ringtone Settings — When using a Bluetooth headset, select the path that the ring is heard.Options: Bluetooth or Speaker and Bluetooth (default).NOTICE: Bluetooth headset connection is required to set this option.-Voicemail — Tap to configure voicemail settings+Service — Set the service provider or other provider for voicemail service.+Setup — Tap to update the phone number used to access voicemail.+Sound — Tap to select a sound when a voicemail is received.+Vibrate — Tap to vibrate when a voicemail is received..-Dial pad touch tones — Check to play a sound when a phone key is touched.-Quick Responses - Tap to edit quick responses to use instead of answering a call.MN002859A01-AChapter 4: CallingSend Feedback 89
-Fixed Dialing Numbers — Use Fixed Dialing to restrict the phone to dial only the phonenumber(s) or area code(s) specified in a Fixed Dialing list.-TTY mode — Tap to set the TTY setting. Use an optional teletypewriter (TTY) device with theLEX L10ig to send and receive calls. Plug the TTY device into the LEX L10ig headset jack andset the device to operate in one of the TTY modes.NOTICE: Use a TSB-121 compliant cable (provided by the TTY manufacturer) to connectthe TTY device to the LEX L10ig.Set the device volume to a middle level setting for proper operation. If you experience ahigh number of incorrect characters, adjust the volume as needed to minimize the errorrate.For optimal performance, the LEX L10ig should be at least 30 cm (12 inches) from theTTY device. Placing the device too close to the TTY device may cause high error rates.+TTY Off (default) — TTY is off.+TTY Full — Transmit and receive TTY characters.+TTY HCO — Transmit TTY characters but receive by listening to earpiece.+TTY VCO — Receive TTY characters but transmit by speaking into microphone.-DTMF tones — Set the length of the DTMF tones. Available options are: Normal or Long.-CDMA Call Settings:+Voice privacy — Enable enhanced privacy mode.Requesting an Emergency AlertThis emergency alert procedure is used to indicate a critical situation.When and where to use: Use this procedure to trigger an emergency alert on the LEX L10ig.Procedure:1Swipe up from the icon.2Tap Activate Emergency.A popup displays giving you 2 seconds to cancel the emergency alert. The emergency numberprogrammed in the LEX L10ig device is dialed. See LEX L10ig Service Provisioning Guide orconfiguration details.MN002859A01-AChapter 4: Calling90 Send Feedback
Figure 48: Emergency Alert Activation PopupMN002859A01-AChapter 4: CallingSend Feedback 91
This page intentionally left blank.
Chapter 5Radio ServicesRadio Services for LEX 10iThe Radio Services is a free application available on the device and enables a LEX L10ig to connectwith a Motorola Operations Critical Wireless (OCW) Push-to-talk Pod (NNTN8127) and Bluetooth-enabled device (accessory) through a wireless Bluetooth connection.Bluetooth-equipped devices can communicate without wires, using frequency-hopping spreadspectrum (FHSS) radio frequency (RF) to transmit and receive data in the 2.4 GHz Industry Scientificand Medical (ISM) band (802.15.1). Bluetooth wireless technology is specifically designed forshortrange (10 meters (32.8 feet) communication and low power consumption.Bluetooth operates within a range of 10 meters (32 feet) line of sight. This is an unobstructed pathbetween your radio and your Bluetooth enabled device.Pairing LEX L10ig with Bluetooth AccessoryPrerequisites: Confirm Bluetooth is enabled on the LEX L10ig device and Bluetooth-enabled device(accessory). To enable/disable Bluetooth on the LEX L10ig, see Enabling Bluetooth on page 138 or Disabling Bluetooth on page 138. Once pairing is established, the range of connection is no more than10 meters (32.8 feet) line-of-sight. This is an unobstructed path between the location of the LEX L10igand the location of the Radio (or other paired accessory).When and where to use: Use this procedure to pair a LEX L10ig with a Bluetooth-enabled device(accessory) through a wireless Bluetooth connection.Procedure:1From the Home screen, tap 2Tap .3In the Secure Pairing window, tap Pair.MN002859A01-ARadio ServicesSend Feedback 93
Figure 49: Bluetooth Pairing Screen4From the Bluetooth screen, in the AVAILABLE DEVICES section, tap an unconnectedBluetooth-enabled device (accessory).Figure 50: Bluetooth Device Screen5In the PAIRED DEVICES section, the Bluetooth-enabled device is connected.MN002859A01-AChapter 5: Radio Services94 Send Feedback
Figure 51: Bluetooth Paired Devices ScreenNOTICE: Your Bluetooth-enabled device (accessory) may require additional steps tocomplete the pairing. Refer to respective Bluetooth-enabled device (accessory) usermanual.Unpairing LEX L10ig from Bluetooth AccessoryPrerequisites: The LEX L10ig is unpaired with Bluetooth-enabled device (accessory).When and where to use: Use this procedure to unpair the LEX L10ig from a Bluetooth-enabled device(accessory).Procedure:1From the Home screen, tap .2Tap .3From the Settings screen, tap Bluetooth.4From the Bluetooth screen, tap next to the device name.MN002859A01-AChapter 5: Radio ServicesSend Feedback 95
Figure 52: Bluetooth Paired Devices5Tap Unpair.Figure 53: Unpair CompleteMN002859A01-AChapter 5: Radio Services96 Send Feedback
Chapter 6MessagingUse Messaging to send and receive SMS and MMS messages.From Home or All Apps screen, tap .Sending a Text MessageWhen and where to use: Use this procedure to send text messages.Procedure:1In the main Messaging screen, tap .The New Message screen displays.Figure 54: New Message Screen2In the To field, enter a name or a mobile phone number.3In the Type message field, enter the text message.Messages are limited to 160 characters. When the limit is approached, a counter displays,above the Send control, showing how many characters are left. If the limit is reached and theuser keeps typing, a new message is created, which is joined with its predecessors whenreceived.If the user presses the Back button while composing a message, it is saved as a draft in theMessaging screen. Tap the conversation to resume composing it.MN002859A01-AMessagingSend Feedback 97
4Tap to send the message.Sending a Multimedia MessageWhen and where to use: Use this procedure to send multimedia messages.NOTICE: Multimedia messaging is only supported when the LEX L10ig is in Public networkmode.Procedure:1In the main Messaging screen, tap .The New Multimedia Message screen displays.Figure 55: New Multimedia Message Screen2In the To field, enter a name or a mobile phone number.3Tap to attach the media file of your choice:•Pictures — Select a picture to attach.•Capture picture — Camera opens to take a picture and attach it.•Videos — Select a video to attach.•Capture video — Camcorder opens to record a video and attach it to the message.•Audio — Choose a sound file to attach.•Record audio — Sound Recorder opens to record a spoken message and attach it to themessage.•Slideshow — Opens a screen to assemble text, photos, videos, and recordings into aslideshow of up to 10 slides to attach to the message.MN002859A01-AChapter 6: Messaging98 Send Feedback
4Tap to send the message.MN002859A01-AChapter 6: MessagingSend Feedback 99
This page intentionally left blank.
Chapter 7ApplicationsThis chapter describes the applications installed on the LEX L10ig.Normally, you access the applications through the Home screen overlay by clicking the icon. Swipethe Home screen up from the icon to reveal the icon.Using File BrowserUse the File Browser application to view and manage files on the device.To open File Browser, tap → .Figure 56: File Browser ScreenThe address bar indicates the current folder path. Tap the current folder path to manually enter a pathand folder name.Tap to select multiple files/folder.Tap to view the internal storage root folder.Tap to view the microSD card root folder.Tap to view the previous folder or to exit the application.Tap and hold an item to perform an operation on that item. Select one of the options from the FileOperations menu:•Information — View detailed information about the file or folder.•Move — Move the file or folder to a new location.•Copy — Copy the select file.•Delete — Delete the selected file.•Rename — Rename the select file.•Open as — Open the selected file as a specific file type.MN002859A01-AApplicationsSend Feedback 101
•Share — Share the file with other devices.Tap to open additional functionality:• Tap the key → New Folder to create a new folder in the current folder.• Tap the key → Search to search for a file or folder.• Tap the key → Sort to sort the list by name, by type, by size or by date.• Tap the key → Refresh to re-display the contents of the current folder.• Tap the key → List View to change the folder view from tile to list format• Tap the key → Change Size to change the size of the icons: Large, Normal or Small.• Tap the key → About File Browser to view the application version information.Managing People ContactsUse the People application to manage contacts.From a Home or Apps screen, tap . The People application, displays four tabs at the top of thescreen: Search, Groups, All contacts, and Favorites. Tap the tabs to change how to view thecontacts. Swipe up or down to scroll through the lists.Adding PeopleWhen and where to use: Use this procedure to add contacts.Procedure:1In the People application, tap .2If there are more than one account with contacts, tap the one to use.3Type the contact’s name and other information. Tap a field to start typing, and swipe down toview all categories.4Adding more than one entry for a category requires an additional step. For example:• To add a work address after typing a personal address, tap Add new for that field.• To open a menu with preset labels, such as Home or Work for an email address, tap thelabel to the right of the item of contact information.• To create your own label, tap Custom in the menu.5Tap Done.Editing PeopleWhen and where to use: Use this procedure to edit contact information.Procedure:1In the People application, tap tab.2Tap a name to edit.3Tap .4Tap Edit.MN002859A01-AChapter 7: Applications102 Send Feedback
5Edit the contact information.6Tap Done.Deleting PeopleWhen and where to use: Use this procedure to delete contacts.Procedure:1In the People application, tap tab.2Tap a name to delete.3Tap .4Tap Delete.5Tap OK to confirm.CameraThis section provides information for taking photos and recording videos using the integrated digitalcameras.NOTICE: If a microSD card is installed, the LEX L10ig saves photos and videos on the microSDcard. If a microSD card is not installed, the LEX L10ig saves photos and videos on the internalstorage.MN002859A01-AChapter 7: ApplicationsSend Feedback 103
Figure 57: Camera Photo ScreenTable 8: Camera Icons and ActionsCall Out Icon Action1 Camera Options Tap to select Camera, Video,or Panorama mode.2 Shutter Tap to take a photo, a panor-amic photo, or to record a vid-eo.3 Photo Settings Tap to select camera settings.Taking PhotosWhen and where to use: Use this procedure to take photos.NOTICE: For camera settings, see Camera Settings on page 108.Procedure:1From the Home screen, tap .The Camera screen is displayed.MN002859A01-AChapter 7: Applications104 Send Feedback
Figure 58: Camera Screen2If necessary, tap to open the Camera Option bar and select Camera icon.Figure 59: Camera Option Bar3Tap for settings.4Frame the subject on screen.5To zoom in or out, press two fingers on the display and pinch or expand fingers.The zoom controls appear on the screen.MN002859A01-AChapter 7: ApplicationsSend Feedback 105
Figure 60: Camera Zoom6Tap .The camera brings the image into focus. When the image is in focus, the focus indicators (topand bottom of screen) turn green and the camera takes a photo.Taking a Panoramic PhotoWhen and where to use: Use this procedure to create a single wide image by panning slowly acrossa scene.Procedure:1From the Home screen, tap .2Tap the Camera Options bar and tap .Figure 61: Panoramic Mode3Frame one side of the scene to capture.MN002859A01-AChapter 7: Applications106 Send Feedback
Figure 62: Panoramic Frame4Tap and slowly start panning across the area to capture. A small white square appearsinside the button the shot is in progress.If panning too quickly, the message Too fast displays.5Tap to end the shot. The panorama is displayed and a progress indicator displays while itsaves the image.Recording VideosWhen and where to use: Use this procedure to record videos.Procedure:1From the Home screen, tap .2Tap the Camera Options bar and tap .Figure 63: Video Mode3To zoom in or out, press two fingers on the display and pinch or expand fingers.MN002859A01-AChapter 7: ApplicationsSend Feedback 107
NOTICE: Video zoom works the same as camera zoom.4Point the camera and frame the scene.5Tap to start recording.The device starts recording the video. The video time remaining appears in the top left of thescreen.6Tap to end recording.Camera SettingsWhen you are in Photo mode, photo settings are displayed on the screen.Tap to display the photo settings options.Figure 64: Camera SettingsThe available photo settings are (from left icon to right icon):• Turn High Dynamic Range (HDR) on or off.• Three screens of More Options. Settings for each option depend on the selected option. Clickthese icons to display more options. Some options require selecting a setting from a menu. Setthese options accordingly.NOTICE: These options are similar to the camera options seen on most cameras. Setaccordingly.- First More Options Screen.MN002859A01-AChapter 7: Applications108 Send Feedback
Figure 65: First More Options Screen- Second More Options Screen.Figure 66: Second More Options Screen- Third More Options Screen.MN002859A01-AChapter 7: ApplicationsSend Feedback 109
Figure 67: Third More Options Screen• Switch from front to rear camera or from rear to front camera.Video SettingsWhen in Video mode, video settings are displayed on screen. Tap to display the video settingsoptions.Figure 68: Video SettingsMN002859A01-AChapter 7: Applications110 Send Feedback
The available video settings are (from left icon to right icon):• Two screens of More Options. Settings for each option depend on the selected option. You canselect an item from a menu or you select an option by clicking it.NOTICE: These options are similar to the video options seen on most cameras. Set thevideo options accordingly.- First More Options Screen.Figure 69: First More Options Video Screen- Second More Options Screen.Figure 70: Second More Options Video Screen• Switch from front to rear video or from rear to front video.GalleryThe Gallery is used to manage your photos and videos.NOTICE: The device supports the following image formats: JPEG, GIF, PNG, and BMP.Use the Gallery to:• View photos• Play videosMN002859A01-AChapter 7: ApplicationsSend Feedback 111
• Perform basic editing of photos• Set photos as wallpaper• Set photos as a contact photo• Share photos and videosTo open the Gallery application, tap → .The Gallery presents all photos and videos stored on the microSD card and internal memory.Figure 71: Gallery — Albums• Tap an album to open it and view its contents. The photos and videos in the album are displayed inchronological order.• Tap a photo or video in an album to view it.• Tap icon (top left corner) to return to the main Gallery screen.• Tap to return to the main Gallery screen.Working with AlbumsAlbums are groups of images and videos in folders.Tap an album to open it. The photos and videos are listed in a chronologically ordered grid. The nameof the album displays at the top of the screen.MN002859A01-AChapter 7: Applications112 Send Feedback
Figure 72: Photos/Videos Inside an AlbumSwipe left or right to scroll images across the screen.Sharing an AlbumWhen and where to use: Use this procedure to share an album in your Gallery.Procedure:1Tap .2Tap .3Tap and hold an album until it highlights.4Tap other albums as required.5Tap .Share applications are displayed.6Select the application that you want to use.7Follow the instructions within the selected application.Getting Album InformationWhen and where to use: Use this procedure to view information about an album.Procedure:1Tap .2Tap .MN002859A01-AChapter 7: ApplicationsSend Feedback 113
3Tap and hold an album until it highlights.4Tap .5Tap Details.Deleting an AlbumWhen and where to use: Use this procedure to delete an album that you no longer need.Procedure:1Tap .2Tap .3Tap and hold an album until it highlights.4Tap .5Tap Delete.6Tap OK to delete the album.Working with PhotosUse Gallery to view photos on the microSD card and edit and share photos.Viewing and Browsing PhotosWhen and where to use: Use this procedure to view or browse photos that you have taken.Procedure:1Tap .2Tap .3Tap an album to open it.4Tap a photo.MN002859A01-AChapter 7: Applications114 Send Feedback
Figure 73: Photo Example5Swipe left or right to view the next or previous photo in the album.6Turn the LEX L10ig to view the photo in upright (portrait) or sideways (landscape) orientation.The photo is displayed (but not saved) in the new orientation.7Tap the photo to view the controls.8Double-tap the screen to zoom in or pinch two fingers together or spread them apart to zoom inor out.9Drag the photo to view parts that are not in view.Rotating a PhotoWhen and where to use: Use this procedure to rotate a photo.Procedure:1Tap a photo to view the controls.2Tap .3Tap .4Tap .The photo rotates 90° clockwise. Each tap rotates the photo another 90°. The photo isautomatically saved with the new orientation.MN002859A01-AChapter 7: ApplicationsSend Feedback 115
Cropping a PhotoWhen and where to use: Use this procedure to crop a photo.Procedure:1In the Gallery, tap a photo to view the controls.2Tap .3Tap .4Tap ).The cropping grid displays.Figure 74: Cropping Grid5Adjust the endpoints to select the portion of the photo to crop.6Tap CROP to save a copy of the cropped photo.The original version is retained.Setting a Photo as a Contact IconWhen and where to use: Use this procedure to set a photo as a contact icon.Procedure:1Tap .2Tap .3Tap an album to open it.MN002859A01-AChapter 7: Applications116 Send Feedback
4Tap the photo to open it.5Tap .6Tap Set picture as.7Select a contact.8Crop the photo accordingly as described in Cropping a Photo on page 116.9Tap SAVE.Sharing a PhotoWhen and where to use: Use this procedure to share a photo.Procedure:1Tap .2Tap .3Tap an album to open it.4Tap a photo to open it.5Tap .6Tap the application to use for sharing the selected photo (for example Bluetooth).Deleting a PhotoWhen and where to use: Use this procedure to delete a photo.Procedure:1Tap .2Tap .3Tap an album to open it.4Tap a photo to open it.5Tap .6Tap Delete.7Tap OK to delete the photo.Working with VideosUse the Gallery to view videos on the microSD card and share videos.Watching a VideoWhen and where to use: Use this procedure to watch a video.Procedure:1Tap .2Tap .MN002859A01-AChapter 7: ApplicationsSend Feedback 117
3Tap an album to open it.4Tap a video.5Tap .The video begins to play.6Tap the screen to view the playback controls.Figure 75: Video Playback Controls7Tap the Pause control.8Tap to return to the previous screen or to return to the Home screen.Sharing a VideoWhen and where to use: Use this procedure to share a video.Procedure:1Tap .2Tap .3Tap an album to open it.4Tap a video to open it.5Tap .The Share menu appears.6Tap the application to use to share the selected video.The selected application opens with the video attached to a new message.Deleting a VideoWhen and where to use: Use this procedure to delete a video.Procedure:1Tap .MN002859A01-AChapter 7: Applications118 Send Feedback
2Tap .3Tap an album to open it.4Tap a video to open it.5Tap .6Tap Delete.7Tap OK.Using Sound RecorderUse Sound Recorder to record audio messages.Recordings are saved on the microSD card (if installed) or the Internal Storage and available in theMusic application playlist titled My Recordings.The recording process is done in four stages.1From the Home screen, tap .2Tap .3Tap to start a recording.Figure 76: Start Recording4Record your message.MN002859A01-AChapter 7: ApplicationsSend Feedback 119
Figure 77: Record Your Message5Tap to stop recording.6Tap Done to save the recording.Figure 78: Finish RecordingMN002859A01-AChapter 7: Applications120 Send Feedback
Voice DialerVoice Dialer is a speech dialog system that provides natural human interface for users tocommunicate seamlessly with the device. Users can make phone calls, look up contact information,launch programs or check calendars.1From the Home screen, tap .2Tap or press the call button on a Bluetooth headset. The following window displays.Figure 79: Voice Dialer Window3Say one of the following commands:• Call• Dial• Redial• OpenCalling a Person by NameWhen and where to use: Use this procedure to call a person by name.Procedure:1From the Home screen, tap .2Tap or press the call button on a Bluetooth headset.3Say the name of the person that you want to call (for example, John Doe).4In the Voice Dialer dialog box, tap Call John Doe.The call is initiated.Redialing a Previous CallWhen and where to use: Use this procedure to redial a previous call.Procedure:1From the Home screen, tap .MN002859A01-AChapter 7: ApplicationsSend Feedback 121
2Tap or press the call button on a Bluetooth headset.3Say Redial.4In the Voice Dialer dialog box, tap Redial.The call is initiated.Dialing by NumberWhen and where to use: Use this procedure to dial a number using the phone number.Procedure:1From the Home screen, tap .2Tap or press the call button on a Bluetooth headset.3Say Dial<[phone number]>.4In the Voice Dialer dialog box, tap the number that displays.The call is initiated.Opening an ApplicationWhen and where to use: Use this procedure to open an application.Procedure:1From the Home screen, tap .2Tap or press the call button on a Bluetooth headset.3Say Open<[application name]>.4In the Voice Dialer dialog box, tap the application name.The application opens.MN002859A01-AChapter 7: Applications122 Send Feedback
Chapter 8WirelessThis section provides information on the wireless features of the LEX L10ig.• Wireless Wide Area Network (WWAN)• Wireless Local Area Network (WLAN)• BluetoothWireless Wide Area NetworksUse Wireless Wide Area Networks (WWANs) to access data over a cellular network.This section provides information on:• Setting the preferred network Public / Private• Sharing a data connection• Enabling / Disabling data roaming• Monitoring data usage• Limiting connections to 2G, 3G, 4G networks• Editing Access Point Names (APNs)• Adding Virtual Private Network VPN• Cellular broadcastsSharing the Mobile Data ConnectionThe Tethering & portable hotspot settings allow you to share your data connection. You can sharethe LEX L10ig mobile data connection with a single computer via USB tethering or Bluetooth tethering.You can also share the data connection with up to eight devices at once, by turning it into a portableWi-Fi hotspot. While the LEX L10ig is sharing its data connection, an icon appears at the top of thescreen and a corresponding message appears in the notification list.Configuring USB TetheringUse this procedure to share a data connection with a host computer.NOTICE: USB tethering is not supported on computers running Mac OS. If your computer isrunning Windows 7 or a recent version of Linux (such as Ubuntu), follow these instructionswithout any special preparation. If running a version of Windows that precedes Windows 7, orsome other operating system, you may need to prepare the computer to establish a networkconnection via USB.NOTICE: After connecting the LEX L10ig to a computer using USB tethering, the computerdisconnects from the network connection, for a short time, and does not have access to theInternet (the LEX L10ig becomes the primary network adapter).Procedure:1Connect the LEX L10ig to a host computer with the USB cable.MN002859A01-AWirelessSend Feedback 123
Figure 80: USB Cable Connection to Host ComputerA USB icon appears at the top of the screen, and the notification Connected as a mediadevice appears briefly at the top of the screen.2Tap .3Tap .4Tap More ... .5Tap Tethering & portable hotspot.6Check USB tethering.The host computer is now sharing the LEX L10ig data connection.Postrequisites: To stop sharing the data connection, uncheck USB tethering or disconnect the USBcable.NOTICE: The USB cover needs to be fully seated after use.Configuring Bluetooth TetheringPrerequisites: Configure the host computer to obtain its network connection using Bluetooth. Formore information, see the host computer’s documentation.When and where to use: Use this procedure to tether Bluetooth to share the data connection with ahost computer.Procedure:1Pair the LEX L10ig with the host computer.2Tap .3Tap .4Tap More ... .5Tap Tethering & portable hotspot.MN002859A01-AChapter 8: Wireless124 Send Feedback
6Check Bluetooth tethering.The host computer is now sharing the LEX L10ig data connection.Postrequisites: To stop sharing the data connection, uncheck Bluetooth tethering .Configuring Portable Wi-Fi Hotspot SettingsPrerequisites: Configure the Wi-Fi Hotspot settings.When and where to use: Use this procedure to turn your LEX L10ig into a portable Wi-Fi hotspot.Procedure:1Tap .2Tap .3Tap More ... .4Tap Tethering & portable hotspot.5Select Portable Wi-Fi hotspot.After a moment, the LEX L10ig starts broadcasting its Wi-Fi network name (SSID), so you canconnect to it with up to eight computers or other devices.Postrequisites: To stop sharing the data connection, uncheck Portable Wi-Fi hotspot.Configuring the Wi-Fi HotspotWhen and where to use: Use this procedure is used to configure a Wi-Fi hotspot.Procedure:1Tap .2Tap .3Tap More ... .4Tap Tethering & portable hotspot.5Tap Set up Wi-Fi hotspot.The Set up Wi-Fi hotspot screen displays.MN002859A01-AChapter 8: WirelessSend Feedback 125
Figure 81: Set up Wi-Fi Hotspot Dialog Box6In the Network SSID text field, edit the network name.7Tap the Security option and select a security method from the drop-down list.•Open•WPA2 PSK.8In the Password text field, enter a password.NOTICE: If Open is selected in the Security option, a password is not required.9Tap Save.Data UsageData usage refers to the amount of data uploaded or downloaded by the LEX L10ig during a givenperiod. Depending on the wireless plan, you may be charged additional fees when your data usageexceeds your plan's limit. To monitor your data usage, go to → Data usage.CAUTION: The usage displayed on the data usage settings screen is measured by yourdevice. Your carrier's data usage accounting may differ. Usage in excess of your carrier plan'sdata limits can result in steep overage charges. The feature described here can help you trackyour usage, but is not guaranteed to prevent additional charges.Data usage settings allow you to:• Set the data usage level at which you' will receive a warning.• Set a data usage limit.• View or restrict data usage by app.MN002859A01-AChapter 8: Wireless126 Send Feedback
• Identify mobile hotspots and restrict background downloads that may result in extra charges.By default, when you open the data usage settings screen you see the settings for mobile data: that is,the data network or networks provided by your carrier.Just below the on-off switch, note the data usage cycle. Tap it to choose a different cycle. This daterange is the period of time for which the graph displays data usage.The vertical white lines on the graph show a period of time within the data usage cycle. This rangedetermines the usage amount displayed just below the graph. Drag lines to change the period.Setting Data Usage WarningWhen and where to use: Use this procedure to set data usage warning.Procedure:1Tap .2Tap .3Tap Data usage.4Check Set mobile data limit.5Drag the red line up/down to the level where you want to limit.6Drag the orange line up/down to the level where you want to receive a warning. When your datausage reaches this level, you' will receive a notification.Setting Auto-SyncYou can also conserve data usage by syncing your apps manually, only when you need the data,rather than relying on auto-sync.When and where to use: Use this procedure to set Auto-Sync.Procedure:To turn auto-sync off or on, tap → Auto-sync data.Disabling Data When RoamingWhen and where to use: Use this procedure to prevent the LEX L10ig from transmitting data overother carriers’ mobile networks when leaving an area that is covered by the carrier’s networks. This isuseful for controlling expenses if the service plan does not include data roaming.Procedure:1Tap .2Tap .3Tap More... .4Tap Mobile networks.5Un-check Data roaming.6Tap .MN002859A01-AChapter 8: WirelessSend Feedback 127
Limiting Data Connection to a NetworkYou can limit the device Private or Public services or extend the battery life by limiting the dataconnections to Global networks, LTE networks, or CDMA networks.NOTICE: This feature is only available on some networks. Check with service provider.When and where to use: Use this procedure to limit data connection to a network.Procedure:1Tap .2Tap .3Tap More ... .4Tap Mobile networks.5Tap Network Mode.6Select Global mode, LTE only, or CDMA only .7Tap .Editing the Access Point NameWhen and where to use: When network information needs to change, the user can edit the APNinformation.NOTICE: Many service provider Access Point Name (APN) data are pre-configured in the LEXL10ig.Procedure:1Tap .2Tap .3Tap More ... .4Tap Mobile networks.5Tap Access Point Names.6Tap .7When finished, tap .8Tap Save.9Tap the radio button next to the new APN name to start using it.10 Tap .Adding a Virtual Private Network (VPN)A virtual private network (VPN) extends a private network across a public network. VPN enables theLEX L10ig to communicate data across a public network while benefiting from the functionality andsecurity of the private network. When connected by VPN, the LEX L10ig establishes a virtual point-to-point connection through a dedicated virtual tunneling protocols or data encryption. TheLEX L10igenables connection to Basic VPN to communicate through any VPN and to Motorola Solutions MobileMN002859A01-AChapter 8: Wireless128 Send Feedback
VPN (MVPN) to communicate through Motorola Solutions mobile VPN. This section describes adding abasic VPN. Motorola Mobile VPN is added and configured by your technical support and requireslicense certification for use.When and where to use: Use this procedure to add a virtual private network to the LEX L10ig (notincluding the Motorola Mobile VPN).Procedure:1Tap .2Tap .3Tap More... .4Tap VPN.5Tap Basic VPN .6Tap + to add VPN profile.7Enter and check:• Name• Type• Server Address• If required, check PPP encryption (MPPE).• If required, check Show advanced options to enter:• DNS servers• DNS search domains• Forwarding routs8Tap Save.Connection to VPN is indicated by on the status bar and the Choose Certification screenis displayed.9Check My Keychain and tap Allow.10 Tap .Cell BroadcastsCell Broadcasts allows emergency alert messages to be broadcast simultaneously from a serviceprovider to multiple users in within a designated geographical area. Broadcasts are often used forweather updates, regional events, traffic conditions and other services.When and where to use: Use this procedure to enable emergency alert messages by cell broadcastson the LEX L10ig.Procedure:1Tap .2Tap .3Tap More... .4Tap Cell broadcasts.MN002859A01-AChapter 8: WirelessSend Feedback 129
5Check the emergency alert types you want to receive.6Tap .Wireless Local Area NetworksWireless local area networks (WLANs) allow the LEX L10ig to communicate wirelessly inside abuilding.Before using the LEX L10ig on a WLAN, the facility must be set up with the required hardware to runthe WLAN (sometimes known as infrastructure). The infrastructure and the LEX L10ig must both beproperly configured to enable this communication.See the documentation provided with the infrastructure (access points (APs), access ports, switches,Radius servers) for instructions on how to set up the infrastructure.Once the infrastructure is set up to enforce the chosen WLAN security scheme, use the Wireless &networks settings to configure the LEX L10ig to match the security scheme.The LEX L10ig supports the following WLAN security options:• Open• Wireless Equivalent Privacy (WEP)• Wi-Fi Protected Access (WPA)/WPA2 Personal (PSK)• Extensible Authentication Protocol (EAP)- Protected Extensible Authentication Protocol (PEAP) — with Microsoft Challenge-HandshakeAuthentication Protocol version 2 (MSCHAPv2) and Generic Token Card (GTC) authentication.- EAP-Transport Layer Security (TLS)- EAP-TTLS - with Password Authentication Protocol (PAP), MSCHAP and MSCHAPv2authenticationThe Status bar displays icons that indicate Wi-Fi network availability and Wi-Fi status.NOTICE: Turn off Wi-Fi when not using it, to extend the life of the battery.Scanning and Connecting to a Wi-Fi NetworkWhen and where to use: Use this procedure to scan for and connect to a Wi-Fi network.Procedure:1Tap .2Tap .MN002859A01-AChapter 8: Wireless130 Send Feedback
Figure 82: Settings Screen3Slide the Wi-Fi switch to the ON position.4Tap Wi-Fi. The LEX L10ig searches for WLANs in the area and lists them.Figure 83: Wi-Fi Screen5Scroll through the list and select the desired WLAN network.MN002859A01-AChapter 8: WirelessSend Feedback 131
6For open networks, tap profile once or press and hold and then select Connect to network orfor secure networks enter the required password or other credentials then tap Connect. Seetechnical support for more information.The LEX L10ig obtains a network address and other required information from the network usingthe dynamic host configuration protocol (DHCP) protocol.7In the Wi-Fi setting field, Connected displays indicating that the LEX L10ig is connected to theWLAN.Configuring a Wi-Fi NetworkWhen and where to use: Use this procedure to configure a Wi-Fi network.Procedure:1Tap .2Tap .3Tap Wi-Fi.4Slide the switch to the ON position.The LEX L10ig searches for WLANs in the area and lists them on the screen.5Scroll through the list and select the desired WLAN network.6Tap the desired network.If the network security is Open, the LEX L10ig automatically connects to the network. For allother network security a dialog box appears.Figure 84: WLAN Network Security Dialog BoxesNOTICE: By default, the network Proxy is set to None and the IP settings is set toDHCP.7If the network security is WEP or WPA/WPA2 PSK, enter the required password and then tapConnect.8If the network security is 802.1x EAP, enter the information below and then tap Connect:MN002859A01-AChapter 8: Wireless132 Send Feedback
• Tap the EAP method drop-down list and select PEAP, TLS, or TTLS.• Tap the Phase 2 authentication drop-down list and select an authentication method.• If required, tap CA certificate and select a Certification Authority (CA) certificate. Note:Certificates are installed using the Security settings.• If required, tap User certificate and select a user certificate. Note: User certificates areinstalled using the Location & security settings.• If required, in the Identity text box, enter the username credentials.• If desired, in the Anonymous identity text box, enter an anonymous identity username.• If required, in the Password text box, enter the password.9Tap .Adding a Wi-Fi NetworkWhen and where to use: You can add a Wi-Fi Network that is currently out of range or indiscoverable.Procedure:1Tap .2Tap .3Tap Wi-Fi.4Slide the Wi-Fi switch to the On position.5Tap +.6Enter network SSID and select Security.7Tap Save.The LEX L10ig connects to the wireless network.8Tap .Manually Adding a Wi-Fi NetworkWhen and where to use: Use this procedure to manually add a Wi-Fi network if the network does notbroadcast its name (SSID) or to add a Wi-Fi network when out of range.Procedure:1Tap .2Tap .3Tap Wi-Fi.4Slide the Wi-Fi switch to the ON position.5Tap + in the bottom right corner of the screen.By default, the network Proxy is set to None and the IP settings is set to DHCP.6In the Network SSID text box, enter the name of the Wi-Fi network.7In the Security drop-down list, select the type of security. Options included are:MN002859A01-AChapter 8: WirelessSend Feedback 133
•None•WEP•WPA/WPA2 PSK•802.1x EAP8If the network security is None, tap Save.9If the network security is WEP or WPA/WPA2 PSK, enter the required password and then tapSave.10 If the network security is 802.1x EAP enter the information below and then tap Save:• Tap EAP method drop-down list and select PEAP, TLS, or TTLS.• Tap Phase 2 authentication drop-down list and select an authentication method.• Tap CA certificate and select a Certification Authority (CA) certificate.NOTICE: Certificates are installed using the Security settings.• Tap User certificate and select a user certificate.NOTICE: User certificates are installed using the Security settings.• Tap Identity to enter the username credentials.• Tap Anonymous to enter an anonymous identity username.• Tap Password to enter password.11 Tap .Advanced Wi-Fi SettingsUse the Advanced settings to configure additional Wi-Fi settings.NOTICE: Advanced Wi-Fi settings are for the device not for a specific wireless network.From the Wi-Fi screen, tap → Advanced to view the advanced settings.•Network notification — When enabled, notifies the user when an open network is available.•Keep Wi-Fi on during sleep — Opens a menu to set whether and when the Wi-Fi radio turns off.-Always — The radio stays on when the device enters suspend mode.-Only when plugged in — The radio stays on while the device is connected to external power.-Never (increases data usage) — The radio turns off when the device enters suspend mode(default).•Wi-Fi optimization — Minimize the battery usage when Wi-Fi is on.•Avoid poor Connection — Connects to the internet only if connection is good.•MAC address — Displays the Media Access Control (MAC) address of the device when connectingto Wi-Fi networks.•IP address — Displays the IP address of the device when connecting to Wi-Fi networks.MN002859A01-AChapter 8: Wireless134 Send Feedback
WLAN ConfigurationUse the WLAN Configuration settings to configure additional WLAN settings.From the Wi-Fi screen, tap → Advanced to view the settings. The following two settings are used toconfigure WLAN:•Wi-Fi frequency band-Auto (2.4GHz and 5GHz) —Use both the 2.4 GHz and 5 GHz bands (default).-5GHz Only — Use only the 5 GHz band.-2.4GHz Only —Use only the 2.4 GHz band.•Keep Wi-Fi on during sleep-Always — Wi-Fi is always enabled even in sleep mold.-Only when plugged in — Wi-Fi is enabled only when the device is plugged in. If the device isnot plugged in, the device will not enter the sleep mold.-Never (increases data usage) — Wi-Fi is never disabled.Modifying a Wi-Fi NetworkThe user can change settings and passwords for a network in the Wi-Fi list.When and where to use: Use this procedure to modify a Wi-Fi network.Procedure:1Tap .2Tap .3Tap Wi-Fi.4Slide the Wi-Fi switch to the ON position.5Tap and hold on a network name and then tap Modify network.6Modify the network settings and then tap Save.7Tap .Removing a Wi-Fi NetworkWhen and where to use: Use this procedure to remove a Wi-Fi network from your list of Wi-Finetworks.Procedure:1Tap .2Tap .3Tap Wi-Fi.4In the Wi-Fi networks list, tap and hold the name of the network.5In the menu, tap Forget network.6Tap .MN002859A01-AChapter 8: WirelessSend Feedback 135
Bluetooth DeviceThe LEX L10ig supports Motorola Operations Critical Wireless (OCW) Push-to-talk Pod (NNTN8127)and Bluetooth-enabled device (accessory) through a wireless Bluetooth connection.Adaptive Frequency HoppingAdaptive Frequency Hopping (AFH) is a method of avoiding fixed frequency interferers, and can beused with Bluetooth voice. All devices in the piconet (Bluetooth network) must be AFH-capable in orderfor AFH to work. There is no AFH when connecting and discovering devices. Avoid making Bluetoothconnections and discoveries during critical 802.11b communications.AFH for Bluetooth consists of four main sections:• Channel Classification - A method of detecting an interference on a channel-by-channel basis, orpre-defined channel mask.• Link Management - Coordinates and distributes the AFH information to the rest of the Bluetoothnetwork.• Hop Sequence Modification - Avoids interference by selectively reducing the number of hoppingchannels.• Channel Maintenance - A method for periodically re-evaluating the channels.The Bluetooth radio in this device operates as a Class 2 device power class. The maximum outputpower is 2.5 mW and the expected range is 10 meters (32.8 ft.). A definition of ranges based on powerclass is difficult to obtain due to power and device differences, and whether one measures open spaceor closed office space.NOTICE: It is not recommended to perform Bluetooth wireless technology inquiry when highrate 802.11b operation is required.Bluetooth SecurityThe current Bluetooth specification defines security at the link level. Application-level security is notspecified. This allows application developers to define security mechanisms tailored to their specificneed. Link-level security occurs between devices, not users, while application-level security can beimplemented on a per-user basis. The Bluetooth specification defines security algorithms andprocedures required to authenticate devices, and if needed, encrypt the data flowing on the linkbetween the devices. Device authentication is a mandatory feature of Bluetooth while link encryption isoptional.Pairing of Bluetooth devices is accomplished by creating an initialization key used to authenticate thedevices and create a link key for them. Entering a common personal identification number (PIN) in thedevices being paired generates the initialization key. The PIN is never sent over the air. By default, theBluetooth stack responds with no key when a key is requested (it is up to user to respond to the keyrequest event). Authentication of Bluetooth devices is based-upon a challenge-response transaction.Bluetooth allows for a PIN or passkey used to create other 128-bit keys used for security andencryption. The encryption key is derived from the link key used to authenticate the pairing devices.Also worthy of note is the limited range and fast frequency hopping of the Bluetooth radios that makeslong distance eavesdropping difficult.Recommendations are:• Perform pairing in a secure environment• Keep PIN codes private and do not store the PIN codes in the device• Implement application-level securityMN002859A01-AChapter 8: Wireless136 Send Feedback
Bluetooth ProfilesThe LEX L10ig supports the following Bluetooth services:• Generic Access Profile (GAP) — Use for device discovery and authentication.• Service Discovery Protocol (SDAP) — Handles the search for known and specific services andgeneral services.• Serial Port Profile (SPP) — Sets up a virtual serial port and connects two Bluetooth enableddevices. For example, connecting the LEX L10ig to a printer.• Human Interface Device Profile (HID) — Allows Bluetooth keyboards, pointing devices, gamingdevices and remote monitoring devices to connect to the LEX L10ig.• Object Push Profile (OPP) — Allows the LEX L10ig to push and pull objects to and from a pushserver.• Dial-up Networking (DUN) — Allows the LEX L10ig to access the Internet and other dial-up servicesusing a Bluetooth enabled mobile phone.• Hands-Free Profile (HFP) — Allows a hands-free device, such as a Bluetooth headset, to place andreceive calls on the LEX L10ig.• Advanced Audio Distribution Profile (A2DP) — Allows the LEX L10ig to stream stereo-quality audioto a wireless headset or wireless stereo speakers.• Audio/Video Remote Control Profile (AVRCP) — Allows the LEX L10ig to control televisions, hi-fiequipment, etc.• General Object Exchange Profile (GOEP) — Provides a basis for other data profiles. Based onOBEX and sometimes referred to as such.• Handsfree Profile (HFP) — Allow car hands-free kits to communicate with mobile phones in the car.• Personal Area Network (PAN) — Allow the use of Bluetooth Network Encapsulation Protocol onLayer 3 protocols for transport over a Bluetooth link.• General Audio/Video Distribution Profile (GAVDP) — Provides the basis for A2DP, and VDP.• Phone Book Access Profile (PBAP) — Allows exchange of Phone Book Objects between a car kitand a mobile phone to allow the car kit to display the name of the incoming caller; allow the car kitto download the phone book so the user can initiate a call from the car display.• Message Access Profile (MAP) — allows exchange of messages between devices.• Handset Profile (HSP) — Provides support for the popular Bluetooth headsets to be used withmobile phones with ability to ring, answer a call, hang up and adjust the volume.• File Transfer Profile (FTP) — Provides the capability to browse, manipulate and transfer files andfolders in a file system of another system.• Proximity profile (PXP) — Enables proximity monitoring between two devices.• Heart Rate Profile (HRP) — Enables transmission and reception of medical device data.• Health Thermometer profile (HTP) — Enables transmission and reception of medical device data.Bluetooth Power StatesThe Bluetooth radio is off by default.The following modes are available:•Suspend — When the LEX L10ig goes into suspend mode, the Bluetooth radio stays on.•Airplane Mode — When the LEX L10ig is placed in Airplane Mode, the Bluetooth radio turns off.When Airplane Mode is disabled, the Bluetooth radio returns to the prior state. When in AirplaneMode, the Bluetooth radio can be turned back on if desired.MN002859A01-AChapter 8: WirelessSend Feedback 137
Bluetooth Radio Power for AndroidTurn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., anairplane). When the radio is off, other Bluetooth devices cannot see or connect to the device. Turn onthe Bluetooth radio to exchange information with other Bluetooth devices (within range). Communicateonly with Bluetooth radios in close proximity.NOTICE: To achieve the best battery life, turn off radios when not in use.Enabling BluetoothWhen and where to use: Use this procedure to enable Bluetooth.Procedure:1Tap .2Tap .3Slide the Bluetooth switch to the ON position. also appears in the Status bar.4Tap .Disabling BluetoothUse this procedure to disable Bluetooth.Procedure:1Tap .2Tap .3Slide the Bluetooth switch to the OFF position.4Tap .Changing the Bluetooth NameBy default, the LEX L10ig has a generic Bluetooth name that is visible to other devices whenconnected.When and where to use: Use this procedure to change the Bluetooth name.Procedure:1Tap .2Tap .3Tap Bluetooth.4If Bluetooth is not on, slide the switch to the ON position.5Tap .6Tap Rename Phone.7Enter a name and tap Rename.MN002859A01-AChapter 8: Wireless138 Send Feedback
8Tap .Selecting Profiles on a Bluetooth DeviceSome Bluetooth devices have multiple profiles for different connections.When and where to use: Use this procedure to select a profile on the Bluetooth device that connectsto the LEX L10ig.Procedure:1Tap .2Tap .3Tap Bluetooth.4In the AVAILABLE DEVICES list, tap next to the device name.5Under PROFILES, select a profile to use.6Tap .MN002859A01-AChapter 8: WirelessSend Feedback 139
This page intentionally left blank.
Chapter 9ADB and USB Driver SetupThis chapter describes how to set up the Android Debug Bridge (ADB) and USB driver for yourWindows PC. The ADB and USB driver are required to perform Fastboot OS updates and to capturedebug logs using ADB. They are also used to push files onto a device and for APK installation.Required Software and HardwareIn order to install the ADB and USB driver, certain software and hardware requirements must be met.• Hardware (one of the following)- Windows PC running Window 8- Windows PC running Window 7 32/64 bits- Windows PC running Windows XP SP3 with Micro-B USB Cable• Software- LEX_L10ig.zip (contains ADB and USB drivers)- Android SDK (adb utility) installation procedure available at the following link: https://developer.android.com/sdk/installing/index.html?pkg=toolsInstalling USB Driver and ADBPrerequisites: Ensure all old USB drivers are removed before beginning this procedure.When and where to use: Use this procedure to install the USB driver and ADB.Procedure:1Insert the provided LEX L10ig ADB USB Driver CD into a CD or DVD drive.2Click the Start button and select Computer.Figure 85: Access ComputerMN002859A01-AADB and USB Driver SetupSend Feedback 141
3Open the CD drive and copy LEX_L10ig.zip to your desktop.Figure 86: Access CD4Extract the LEX_L10ig.zip file copied on your desktop to C:\Program Files (x86) or any otherlocation in your OS installation drive where you prefer to keep the driver, and then select OK.Figure 87: Select Destination5Enable USB debugging in your device by:aOn the LEX L10ig, navigate to Settings → About Phone and click the build number seventimes to enable developer options.MN002859A01-AChapter 9: ADB and USB Driver Setup142 Send Feedback
bTap to return to Settings; then, tap Developer options and click the checkbox for USBDebugging.cClick OK when prompted to allow USB debugging.6Configure the driver in the Device Manager.aOn your computer, click the Start button and search for Device Manager and open it.Figure 88: Access Device ManagerbFind Android under Other devices right-click and select Update Driver Software.Figure 89: Select Update Drive SoftwarecSelect Browse my computer for driver software.MN002859A01-AChapter 9: ADB and USB Driver SetupSend Feedback 143
Figure 90: Select Browse my computer for driver softwaredClick Browse and select the folder where the driver was extracted (that is, C:\Program Files(x86)\Lex L10ig_ADB_USB_Driver or the custom path chosen by you at the time ofextracting the LEX_L10ig.zip file.eClick OK and then click Next.Figure 91: Select Installation FolderMN002859A01-AChapter 9: ADB and USB Driver Setup144 Send Feedback
fIf prompted, select Install this driver software anyway.Figure 92: Select Install this driver software anywaygClick Close to complete the installation.Figure 93: Close the InstallationThe driver is now installed.7Set up the ADB USB profile on your PC as follow-up with these steps:aAfter driver installation, make sure there is a .android folder in your user profile directory.bIf you have installed and run ADB for the device before, run adb kill- server” before you canuse the ADB.cTo see if ADB installs successfully, run adb devices from the command line.MN002859A01-AChapter 9: ADB and USB Driver SetupSend Feedback 145
This page intentionally left blank.
Chapter 10AccessoriesThis chapter provides information for using the accessories associated with the LEX L10ig.AccessoriesThis section lists the LEX L10ig accessories along with specifications.LEX L10ig General Accessories:• Replaceable Standard Battery Li Ion 2340 mAh 3.7V• Replaceable High-capacity Battery Pack Li Ion 4680 mAh 3.7V• Handheld Standard Battery Door• Handheld Extended Battery Door• LEX L10ig Auto Charge (Vehicle Power Adapter)• Power Supply• Carry Accessory Glove LEX L10ig Rubber Sleeve• Desktop Cradle• Vehicle Cradle• USB Cable• HolsterUSB CableA USB cable is necessary to connect your LEX L10ig to a charger.The USB cable:• Connects the LEX L10ig to a USB charger to charge the LEX L10ig.• Provides USB communication with a host computer. When the LEX L10ig is connected to a hostcomputer, the LEX L10ig appears as a removable disk on the host computer.Figure 94: USB CableMN002859A01-AAccessoriesSend Feedback 147
Desktop CradleA desktop cradle provides an alternative method to charge your LEX L10ig.The desktop cradle:• Provides power for charging and operating the LEX L10ig• Enables connecting a mouse to the LEX L10igFigure 95: Desktop CradleCharging the LEX L10igTo charge the LEX L10ig, insert the LEX L10ig units by placing the bottom of the LEX L10ig, at a slightforward angle, into the cradle.The LED of the LEX L10ig, shows the status of the battery charging. See Battery Charge LED Statusfor charging status indications. The 2280 mAh battery charges in approximately four hours.Charge the LEX L10ig units in temperatures from 0°C to +45°C (32°F to 113°F) ). Note that charging isintelligently controlled by the LEX L10ig. To accomplish this, for small periods of time, the LEX L10igalternately enables and disables battery charging to keep the battery at acceptable temperatures. TheLEX L10ig indicates when charging is disabled due to abnormal temperatures via its notification LED.Vehicle CradleInstall the vehicle mount on the surface of the vehicle that is reasonably flat and free of dirt and oil.Clean the mounting surface with a glass cleaner and a clean cotton cloth. Install the vehicle mount onthe windshield or other flat car surface.CAUTION: Some states prohibit the mounting of any electronic device in any location on thevehicle dashboard. Be sure to check with local laws acceptable mounting areas before installingthe auto mounting kit.Figure 96: Vehicle CradleMN002859A01-AChapter 10: Accessories148 Send Feedback
HolsterUse the holster to securely carry the LEX L10ig when working. The holster is threaded through a beltand stores the LEX L10ig when not in use or when using a headset.Figure 97: HolsterInsert the LEX L10ig into the holster with the screen facing in or out.MN002859A01-AChapter 10: AccessoriesSend Feedback 149
This page intentionally left blank.
Chapter 11Maintenance and TroubleshootingThis chapter includes instructions on cleaning and storing the LEX L10ig. It also providestroubleshooting solutions for potential problems during LEX L10ig operation.Maintaining the LEX L10igFor trouble-free service, observe the following tips when using the LEX L10ig:• Do not scratch or use a pen or a pencil or other sharp object on the surface of the screen.• The touch-sensitive screen is made of polycarbonate. Do not to drop or subject the device to strongimpact.• Protect from extreme temperatures. Do not leave device on the dashboard of a car on a hot day,and keep it away from heat sources.• Do not store in any location that is dusty, damp, or wet.• Use a soft lens cloth to clean the device. If the surface of the screen becomes soiled, clean it with asoft cloth moistened with isopropyl alcohol.• Periodically replace the rechargeable battery to ensure maximum battery life and productperformance. Battery life depends on individual usage patterns.Battery Safety GuidelinesAdhere to the following guidelines for battery safety:• The area where the units are charged should be clear of debris and combustible materials orchemicals.• Follow battery usage, storage, and charging guidelines found in this guide.• Improper battery use may result in a fire, explosion, or other hazard.• To charge the battery, the battery and charger temperatures must be between +32 ºF and +113 ºF(0 ºC and +45 ºC)• Do not use incompatible batteries and chargers. Use of an incompatible battery or charger maypresent a risk of fire, explosion, leakage, or other hazard. If you have any questions about thecompatibility of a battery or a charger, contact Motorola Solution support.• If charging through a USB port, the device shall only be connected to products that bear the USB-IFlogo or have completed the USB-IF compliance program.• To enable authentication of an approved battery, as required by IEEE1725 clause 10.2.1, allbatteries will carry a Motorola hologram. Do not fit any battery without checking it has the Motorolaauthentication hologram.• Do not disassemble or open, crush, bend or deform, puncture, or shred.• Severe impact from dropping any battery-operated device on a hard surface could cause the batteryto overheat.• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse orexpose to water or other liquids, or expose to fire, explosion, or other hazard.• Do not leave or store the equipment in or near areas that might get very hot, such as in a parkedvehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer.MN002859A01-AMaintenance and TroubleshootingSend Feedback 151
• Battery usage by children should be supervised.• Follow local regulations to properly dispose of used rechargeable batteries.• Do not dispose of batteries in fire.• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. Ifcontact has been made, wash the affected area with large amounts of water and seek medicaladvice.• If you suspect damage to your equipment or battery, contact Motorola Solutions support to arrangefor inspection.Cleaning GuidelinesThis section includes cleaning guidelines for the LEX L10ig.WARNING: Avoid exposing this product to contact with hot oil or other flammable liquids. Ifsuch exposure occurs, unplug the device and clean the product immediately in accordance withthese guidelines. Avoid exposing this product to contact with hot oil or other flammable liquids.If such exposure occurs, unplug the device and clean the product immediately in accordancewith these guidelines.CAUTION:Always wear eye protection.Read the warning labels on compressed air and alcohol products before use.If you have to use any other solution for medical reasons, contact Motorola Solutions for moreinformation.Approved Cleanser Active Ingredients100% of the active ingredients in any cleaner must consist of one or a combination of the following:isopropyl alcohol, or mild dish soap.Cleaning InstructionsDo not apply liquids directly to the device. Dampen a soft cloth or use pre-moistened wipes. Do notwrap the device in the cloth or wipe, but gently wipe the unitHarmful IngredientsMany vinyl gloves contain phthalate additives, which are often not recommended for medical use andare known to be harmful to the housing of the device. The device should not be handled while wearingvinyl gloves containing phthalates, or before hands are washed to remove contaminant residue aftergloves are removed. If products containing the harmful ingredients are used before handling thedevice, such as hand sanitizers containing ethanolamine, hands must be completely dry beforehandling the device to prevent damage to the plastics.Cleaning Materials Required• Alcohol wipes• Lens tissue• Cotton-tipped applicators• Isopropyl alcohol• Can of compressed air with a tubeMN002859A01-AChapter 11: Maintenance and Troubleshooting152 Send Feedback
Cleaning FrequencyThe cleaning frequency is up to your discretion due to the varied environments in which the mobiledevices are used. They may be cleaned as frequently as required, but it is advisable to clean thecamera window periodically when used in dirty environments to ensure optimum performance.Cleaning the LEX L10igThis section includes instructions on how the LEX L10ig should be cleaned.HousingUsing the alcohol wipes, wipe the housing including buttons.DisplayThe display can be wiped down with the alcohol wipes, but care should be taken not to allow anypooling of liquid around the edges of the display. Immediately dry the display with a soft, non-abrasivecloth to prevent streaking.Camera WindowWipe the camera window periodically with a lens tissue or other material suitable for cleaning opticalmaterial such as eyeglasses.Cleaning the Interface ConnectorWhen and where to use: Use this procedure To clean the contacts of the interface connector on LEXL10ig.Procedure:1Power off the LEX L10ig.2Dip the cotton portion of the cotton-tipped applicator in isopropyl alcohol.3Rub the cotton portion of the cotton-tipped applicator along the contacts of the interfaceconnector. Slowly move the applicator back-and-forth from one side of the connector to theother.4If grease and other dirt can be found on other areas of the cradle, remove using a lint-free clothand alcohol.5Allow few minutes (depending on ambient temperature and humidity) for the alcohol to air drybefore powering on the LEX L10ig.Cleaning the Battery ContactsWhen and where to use: Perform this procedure to clean the battery connectors.Procedure:1Remove the main battery from LEX L10ig.2Dip the cotton portion of the cotton-tipped applicator in isopropyl alcohol.3Gently, rub the cotton portion of the cotton-tipped applicator back-and-forth across the contacts.Do not leave any cotton residue on the contacts.4Use the cotton-tipped applicator dipped in alcohol to remove any grease and dirt near thecontacts area.MN002859A01-AChapter 11: Maintenance and TroubleshootingSend Feedback 153
5Use a dry cotton-tipped applicator and repeat steps 4 and 5 at least three times.CAUTION: Do not point nozzle at yourself and others. Ensure that the nozzle or tube isaway from your face.6Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch awayfrom the surface.7Inspect the area for any grease or dirt, repeat if required.Troubleshooting This section lists common problems and solutions to fix the problems.Table 9: Troubleshooting the LEX L10igProblem Cause SolutionAfter pressing thePower button, doesnot turn on.Battery iscompletelydischarged.Re-charge or replace the battery.Battery notinstalledproperly.Install the battery properly. See Installing the Battery.Power buttonnot helddown longenough.Press the Power button until the Motorola Solutions splashscreen is displayed.Device notresponding.Reset the device.After pressing thePower button, thedevice does notturn on but acharge battery iconAppears.Batterycharge levelis very low.Re-charge or replace the battery.After connectingthe device to a Ca-ble, a batterycharging icon Ap-pears.Battery is de-pleted but ischarging.Press and hold the Power button to turn on.When charging, theLED slowly blinksred.The device isat an ex-tremely low-power state.Charge the device for a few minutes. The LED changes toflashing green then press the Power button to turn on theLEX L10ig. If LED continuously blinks red, check powerconnections. Disconnect and reconnect connections.Battery did notcharge.Batteryfailed.Replace battery. If the device still does not operate, per-form a hardware reset.Device wasremovedfrom powerwhile batteryInsert device in cradle or attach Charge Cable. The 2280mAh battery fully charges in approximately four hours.Table continued…MN002859A01-AChapter 11: Maintenance and Troubleshooting154 Send Feedback
Problem Cause Solutionwas charg-ing.Extreme bat-tery tempera-ture.Battery does not charge if ambient temperature is below 0°C (32 °F) or above 45 °C (113 °F).During data com-munication with ahost computer, nodata transmitted, ortransmitted datawas incomplete.Device re-moved fromUSB cable ordisconnectedfrom hostcomputerduring com-munication.Reattach the communication cable and re-transmit.Incorrect ca-ble configura-tion.See technical support.During data com-munication over Wi-Fi, no data trans-mitted, or transmit-ted data was in-complete.Wi-Fi radio isnot on.Turn on the Wi-Fi radio.You movedout of rangeof an accesspoint.Move closer to an access point.During data com-munication overBluetooth, no datatransmitted, ortransmitted datawas incomplete.Bluetooth ra-dio is not on.Turn on the Bluetooth radio.You movedout of rangeof anotherBluetooth de-vice.Move without 10 m (32.8 ft.) of the other device.During data com-munication overPublic / Private, nodata transmitted, ortransmitted datawas incomplete.You are in anarea of poorcellular serv-ice.Move into an area that has better service.VPN is notset up cor-rectly.See technical support for VPN setup information.SIM card notinstalledproperly.Remove and re-install the SIM cards.Data plan notactivated.Contact your service provider and ensure that your dataplan is enabled.No sound. Volume set-ting is low orturned off.Adjust the volume.Device turns off. Device is in-active.The display turns off after a period of inactivity. Set this pe-riod to 15 seconds, 30 seconds, 1, 2, 5, 10, or 30 minutes.Table continued…MN002859A01-AChapter 11: Maintenance and TroubleshootingSend Feedback 155
Problem Cause SolutionBattery is de-pleted.Recharge or replace the battery.Extreme bat-tery tempera-ture.Move device to an area where the ambient temperature isbetween 0 °C (32 °F) or above 45 °C (113 °F).A message ap-pears stating notenough storagememory.Too manyapplicationsinstalled onthe device.Remove user-installed applications on the device to recov-er memory. Select → → Apps → Downloaded.Select the unused programs and tap Uninstall.Device cannot findany Bluetooth devi-ces nearby.Too far fromother Blue-tooth devi-ces.Move closer to the other Bluetooth device(s), within arange of 10 meters (32.8 feet).The Blue-tooth de-vice(s) near-by are notturned on.Turn on the Bluetooth device(s) to find.The Blue-tooth de-vice(s) arenot in discov-erable mode.Set the Bluetooth device(s) to discoverable mode. If need-ed, refer to respective Bluetooth-enabled device (accesso-ry) user manual..Backing Up the LEX L10igBacking up the LEX L10ig must be done manually.Prerequisites: A USB cable to connect the LEX L10ig to a computer.When and where to use: Use this procedure anytime a backup of the LEX L10ig is necessary.Procedure:1Connect the LEX L10ig to a computer using the supplied USB cable.The first time you connect to a computer the following message is displayed:Installing Device Driver SoftwareAfter the driver software is installed, the following message is displayed:Your device is ready to use2Click the Start button and then select Computer.3Select the LEX L10ig Portable Device.4Select Internal storage.5Navigate to the files that you want to back up.6Copy the files/folders to a secure location on your computer.MN002859A01-AChapter 11: Maintenance and Troubleshooting156 Send Feedback
Backing up ContactsTo back up contacts, the contacts must be exported to a VCF file which must be copied to a securelocation.Prerequisites: Contacts must exist in the contact list.When and where to use: Use this procedure to periodically back up your contacts.Procedure:1From the Home screen, tap .2Tap .Figure 98: Contacts Menu3Select Import/export.MN002859A01-AChapter 11: Maintenance and TroubleshootingSend Feedback 157
Figure 99: Import/Export Contacts Popup4Select Export to storage.Figure 100: Export Confirmation PopupMN002859A01-AChapter 11: Maintenance and Troubleshooting158 Send Feedback
5Tap OK to export the contacts.The VCF file is saved to the location indicated.6Follow the procedure under Backing Up the LEX L10ig on page 156 to complete the contactsbackup.Resetting the LEX L10igUse this procedure to reset the LEX L10ig.When and where to use: If the LEX L10ig does not operate properly, perform the following procedure.Procedure:1Power off and on the LEX L10ig and verify if the problem is gone.The LEX L10ig restarts. If the problem remains, perform Step 2.CAUTION: To avoid erasing important data from your LEX L10ig, do not press any of theLEX L10ig buttons during power up.2Remove the battery, reinsert it, and verify if the problem is gone.The LEX L10ig restarts. If the problem remains, perform factory data reset.Performing Factory Data ResetA factory data reset is a software restore of the LEX L10ig to its original manufacturer settings. Beforeresetting the LEX L10ig, back up your data. Factory data reset erases all your personal data from theLEX L10ig memory and microSD card including: configuration, contents, accounts, installedapplications, user settings, music, photos, videos, installed licenses, pre-loaded application updates,DM bootstrapping data, integrated and pre-loaded application configuration, post-loaded applicationsand user passwords. After reset is performed, re-enter your backed up information.When and where to use: Use this procedure to perform factory data reset:CAUTION: Factory data reset is performed only by technical support as a last resort when theLEX L10ig fails to operate. Before performing factory data reset, remove the SIM and microSDcards from the LEX L10ig. Performing factory data reset with a microSD or SIM cards installedmay cause data corruption or loss.NOTICE: Factory data reset configures the LEX L10ig to public communication only. To returnto combined Public and Private configuration, see your technical support. The last updatedfirmware and the initial version of pre-loaded applications are preserved through a reset tofactory defaults.Procedure:1Tap .2Tap .3Tap Backup & reset.4Tap Factory data reset.The LEX L10ig powers off, powers on, then the system recovery screen appears.MN002859A01-AChapter 11: Maintenance and TroubleshootingSend Feedback 159
This page intentionally left blank.
Chapter 12Technical SpecificationsThe following table summarizes the LEX L10ig operating, environment, and technical hardwarespecifications.Table 10: Technical SpecificationsItem SpecificationPhysicalDimensions (H x W x D) 5.62 x 2.85 x 0.547 in143 x 72.6 x 15 mmWeight 195 g (6.88 Oz) including standard batteryDurability Continues to run after multiple drops to concrete from a height of 48inches (121 cm)Drop tested using MIL-STD-810G Method 516.6, Procedure IVIP67 (1 meter water immersion for 30 minutes)Display 4.7” 720p HD (720 x 1280)Capacitive touch screenOperating Temperature 14°F to 131°F (-10°C to +55°C)Storage Temperature -22°F to 149°F (-30°C to +65°C)HardwareProcessor 2.3 GHzQuad Core ProcessorQualcomm MSM8974AADisplay 4.7” 720p HD (720X1280)Capacitive, touch screenMemory 2 GB RAM16 GB eMMCExpandable to 64GB with microSD™ cardCamera Rear 8MP CameraAuto FocusHigh-Output LED FlashDigital ZoomFront 2MP CameraSensors Proximity SensorAmbient Light SensorAccelerometer SensorTable continued…MN002859A01-ATechnical SpecificationsSend Feedback 161
Item SpecificationBarometer SensorE-CompassPorts USB 2.0 High-Speed3.5 mm Audio Jack (stereo)Accessory/Charging PortBattery Standard - 2340 mAH, Li IonHigh Capacity - 4680 mAh, Li IonSoftwareOperating System Android™ KitKat 4.4.4User Interface Public Safety Experience (PSX) SoftwareMessaging SMS/MMSEmail (Corporate Sync, POP3, IMAP, Push Email)Web Standard AOSP Browser4G/LTERelease 3GPP Release 9Band Class 3, 4, 5, 7, 8, 20, 26, 28Output Power 23 dBm +/- 2 dB (UE power class 3)Bandwidth Up to 20 MHzBroadband data throughput depends on network conditions3GStandards HSPA +/-UMTSBands 1,2,4,5,82GStandards GSM/GPRS/EDGEFrequencies 850 MHz, 900 MHz, 1800 MHz, 1900 MHzWi-FiOperating Band 2.4 GHz, 5 GHzStandards 802.11 a/b/g/nPersonal Area NetworksBluetooth Bluetooth 4.0 Low Energy (LE) + EnhancedData Rate (EDR)Mission Critical Wireless BluetoothMax throughput 2.1 MbpsA2DP Stereo ProfileGPSTable continued…MN002859A01-AChapter 12: Technical Specifications162 Send Feedback
Item SpecificationLocation Services Standalone GPSAssisted GPS (aGPS)Device ManagementRemote Management andConfiguration Supports OMA-DM (Open Mobile Alliance Device Management)Video and ImagingSupported Formats H.263, H.264, MPEG-4 SP, VP8, JPEG (.jpg), GIF (.gif), PNG (.png),BMP (.bmp), WebP (.webp)Formats supported for playback, streaming and recordingSupported File Types 3GPP (.3gp), MPEG-4 (.mp4), WebM (.webm), (.mkv)Video Recording Quality 1080p HD up to 30 frames per second (fps)NOTICE: Video and images are time stamped for evidence documentation.AudioSupported Formats MP3, WAVE, AAC, AMR-NB, AMR-WB, FLAC, MIDI, VorbisSupported File Types MP3 (.mp3), WAVE (.wav), 3GPP (.3gp),MPEG-4 (.mp4, m4a), ATDS raw AAC (.aac),MPEG-TS (.ts)FLAC (.flac), MIDI (.mid, .xmf, .mxmf),RTTTL/RTX (.rtttl, rtx),OTA (.ota), iMelody (imy), Ogg (.ogg), Matroska(.mkv)Output Dual 1 Watt Front-Facing Speakers,106 dB Sound Pressure Level (SPL)3.5 mm audio jack (stereo)Bluetooth (A2DP stereo)Input Triple Noise and Echo Cancelling MicrophonesQuick Access Leather HolsterDimensions (H x W x D) 5.7 x 3.5 x 2.0 in(145 x 90 x 50 mm)Specifications subject to change.Table 11: General AccessoriesItem Desktop Cradle Impact-Rated Vehicle CradlePhysicalDimensions (H x W x D) 6.0 x 5.0 x 3.5 in (152 x 128 x89 mm)6.1 x 3.0 x 2.2 in (155 x 76 x56 mm)Table continued…MN002859A01-AChapter 12: Technical SpecificationsSend Feedback 163
Item Desktop Cradle Impact-Rated Vehicle CradleWeight 12.8 Oz (363 g) 4.8 Oz (135 g)Environmental SpecificationOperating Temperature 32°F to 113°F (0°C to +45°C) -4°F to 131°F (-20°C to +55°C)Storage Temperature -40° F to 158°F (-40°C to70°C)-40° F to 185°F (-40°C to+85°C)Humidity 95% at 113°F (45°C) for 8hours (non-condensing)95% at 131°F (55°C) for 8hours (non-condensing)DurabilitySalt Fog Yes YesVibration Yes YesDrop Yes YesShock (Functional) Yes YesShock (Crash Hazard) Yes, MIL-STD-810G, 75G im-pactESD Yes YesSolar Radiation YesLiquid Resistance Yes YesSafety RegulatoryElectrical Safety US: UL60950 US: UL60950EMI/RFI FCC part 15, Subpart B, ClassB28aANSI C63.4 2009 FCC part 15, Subpart B, ClassB28bFlammability ANSI/UL-94 and ASTM Stand-ardsANSI/UL-94 and ASTM Stand-ardsElectricalPower Supply External power supply input100- 240VAC output 5.0VDC1.2A12V-24V, 5.0VDC, 1.2APower Input 5.0 VDC, 1.2A 5.0 VDC, 1.2ADC Output 5.0VDC 5.0VDCPower On With device insertion With device insertionOptional AccessoriesVehicle Ram® Mount KitSpecifications subject to change.MN002859A01-AChapter 12: Technical Specifications164 Send Feedback

Navigation menu